IMVIB Online vibration monitoring for Ariel compressors The cost-effective way to add spectral vibration measurement & trending on critical machinery
Monitoring vibration trends of your industrial equipment helps you identify developing faults and plan maintenance before breakdowns occur. IMVIB is a complete vibration monitoring solution that collects essential vibration data from your machinery, then displays and stores up-to-date trends on your ipad. With IMVIB, assessing your machines health is easier than ever. Features An ipad Air to view your equipment s vibration trends The IMBU App which displays vibration trends on your ipad Rugged operator display fully viewable in direct sunlight Communication via Ethernet, GSM or CDMA Email alerts Graphic interfaces available in English, Russian, Chinese (simplified), Spanish, Portuguese, French and German Unlimited vibration data storage in fully secure data centers Benefits Get a total overview of the health and performance of your assets in one interface Access to unbiased data from any location Early warning of any mechanical issue that causes increased vibration levels Reduce total cost of ownership by more effective maintenance No expertise required for using IMVIB Easy to install
Kit contents ipad Air 2, 4 or 6 accelerometers with integrated armored cable (one accelerometer per throw) 12 channel vibration analyzer IMBU field transmitter with an all-weather enclosure Operator display exhibiting RMS and peak-to-peak for all measurement points All required mounting hardware with easy to follow instructions Specific mounting hardware to mount accelerometer on crosshead Sensor cables RS485 cable Optional ADD-ONS Additional sensors (up to 12 accelerometers per vibration analyzer) Additional vibration analyzers (up to 3 analyzers per transmitter) Extra ipad air or ipad mini Transmission and visualization of other data points (temperatures, pressures, etc.)
Specifications Accelerometer Dynamic range ± 100 g, peak Frequency response (±3dB) 1-8000 Hz Accelerometer on crosshead mounting stud Vibration analyzer Inputs Sampling rate Outputs Interfaces Protection 12 accelerometer + 2 tachometer inputs 133kHz (12 channels simultaneous) 2 digital outputs 2x Modbus RTU slave (RS485) one port is available for PLC or SCADA Individual galvanic isolation of all terminals IMVIB vibration analyzer
Specifications (continued) Field transmitter Interfaces Cellular data usage Modbus TCP server or client (Ethernet) available for PLC or SCADA Modbus RTU master (RS485) connected to vibration analyzer 50-300mb/month (typical) IMBU field transmitter Power and environmental Accelerometer Vibration analyzer Field transmitter Part number 772-8002 771-8006 252-8001 Input power 18-28VDC 18-32VDC 230VAC or 18-32VDC Power consumption 2-10mA 350mA (max cont.) 1A @ 230VAC (max) Operating temperature -50 C to + 121 C -30 C to +80 C -30 C to +80 C Ingress protection IP68 IP66 IP66 Dimensions 25x28x45mm 200x200x80mm 380x380x210mm Weight 150g 3kg 17kg Material casing Stainless steel (316L) Stainless steel (304) Stainless steel (304) Hazardous zone classification** Atex zone II CSA class 1 div 2 Atex zone II CSA class 1 div 1* *mounted in explosion proof enclosure on request ** Atex zone I and CSA class 1 div 1 variants available Installed in safe zone
Specifications (continued) Cables Integrated cable Extension cable RS485 cable Part number* 772-8002-xx 773-8001-xx 901-8001-xxx Number of conductors One twisted pair One twisted pair One twisted pair Shield Foil with drain wire Braided shield with drain wire Copper braiding Material of outer sheath Teflon with stainless Thermoplastic Polyvinyl chloride steel armor cover elastomer (TPE) (PVC) Temperature range -40 C to +204 C -40 C to +75 C -40 C to +80 C Color Red Blue Violet Outside diameter 6.9mm 6.4mm 5.7mm Standard length 3m 10m 100m Available lengths 1-30m 1-30m 1-1200m Weight 6,5kg/100m 5,7kg/100m 3,9kg/100m Termination 3 Pin MIL-C-5015 3 Pin MIL-C-5015 Blunt cut male female * xx is length in meters Crosshead mount Material Stainless steel (AISI 303) Thread size (female) M6x1.0 / 9mm deep Crosshead mount for Ariel JGC
Ordering information Crosshead vibration monitoring kits for Ariel compressors Part Number Accelerometers Crosshead mount Sensor cables Vibration analyzer Field transmitter RS485 cable Apple ipad Air 2 cylinders (2 throw) 750-8xx2-01 2 2 2x15m 1 1 100m 1 4 cylinders (4 throw) 750-8xx4-01 4 4 4x15m 1 1 100m 1 6 cylinders (6 throw) 750-8xx6-01 6 6 6x15m 1 1 100m 1 6 additional accelerometers 761-8006-01 6 0 6x15m 1 0 100m 0 Vibration monitor kits for other rotating equipment Part Number Accelerometers Crosshead mount Sensor cables Vibration analyzer Field transmitter RS485 cable Apple ipad Air 2 accelerometers 760-8002-01 2 0 2x15m 1 1 100m 1 4 accelerometers 760-8004-01 4 0 4x15m 1 1 100m 1 6 accelerometers 760-8006-01 6 0 6x15m 1 1 100m 1 6 additional accelerometers 761-8006-01 6 0 6x15m 1 0 100m 0 Contact details Installation services Address IMBU BV Our engineers are available for installation, Lumeystraat 49 commissioning and training. 3554WC Utrecht The Netherlands Email Web site sales@imbu.nl www.imbu.nl