GE Security Small Building Life Safety Solutions Affordable FireShield Conventional Fire Alarm Control Panels imagination at work
cost Location: Environment: Solution: Flower shop Finely decorated, gentle hues FireShield remote annunciators, Genesis horn-strobes Reliability you ve come to expect from the industry s leader in fire alarm technology. FireShield fire alarm control panels demonstrate that value doesn t have to come at the expense of quality, and that small building owners don t have to settle for second-rate fire protection. With FireShield comes a full lineup of advanced features designed expressly for new and retrofit projects that cry out for simplicity, yet need stateof-the-art protection. These two attributes aren t mutually exclusive in a fire alarm control panel. At least not now. FireShield takes the very best conventional fire alarm technology available today and blends it with features that benefit installers, contractors, building owners and occupants to provide an effective and economical solution for all small building needs. Building owners like FireShield s price and the peace of mind that comes from knowing their property is protected by equipment engineered and manufactured by the same people responsible for fire protection in some of the most valuable buildings on the planet. For over 30 years GE Security has been identified with the highest standards in property protection. Our name, and the quality and excellence it represents, stands behind every FireShield control panel. FireShield remote zone and system annunciators mount to standard electrical boxes and present a clean, finished appearance that blends discreetly with any decor.
effective Building occupants are big fans of FireShield even though they may not be aware of its existence. The fact that they don t have to deal with annoying false alarms and buzzing control panels is all it takes to win them over. In fact, FireShield s invisibility is one of its strongest selling points. Designed for rock-solid reliability, these panels are intended to be taken for granted, but can be depended upon to leap into action the moment they re needed. Installers benefit big time from FireShield s simple setup and intuitive programming. Its ingenious combination circuits support waterflow switches and associated tamper switches on a single zone, giving installers the flexibility they need to get the job done quickly and efficiently. Front panel programming is also a snap, and one-person device testing in either audible or silent mode is like a walk in the park. Contractors get all the advantages FireShield offers to building owners, occupants, and installers plus the added bonus that goes along with knowing that call-backs are a thing of the past, and that every FireShield installation is a successful installation. Meeting the needs of so many applications with so few parts to stock means that inventories can be kept low while job turnover remains high. That s a combination that makes FireShield the stock-in-trade for successful contractors everywhere. With FireShield there is no longer any reason to skimp on fire protection no matter how small the job is. Full-featured and flexible, FireShield meets the individual needs of small building applications and leaves plenty of room to accomodate upgrades and renovations far into the future. Easy to install Simple to operate No-fuss programming Integrated DACT/Dialer 3, 5, and 0 IDC models
fireshield CONTROL PANELS FS004 FS50 FS30 specifications Initiating Device Circuits - IDCs Class B 0 8 6 4 0 5 3 (Available combinations shown at right) Class A 0 3 4 5 0 Three Class B IDCs Notification Appliance Circuits - NACs Class B 4 0 0 (Available combinations shown at right) Class A 0 0 Two Class B NACs Power Supply 3.0 A expandable to 6.0 A 3.0 Amps total.0 Amps total NAC Voltage Rating 4 Vfwr Maximum NAC current.5 Amps each,.5 Amps total.5 Amps each.5 Amps each for NAC + or 3 + 4.5 Amps total.5 Amps total 5.0 A w/optional transformer AC Input 0 Vac 60 Hz 30 Vac 50/60 Hz.6 A w/optional transformer 0.8 A w/optional transformer 0.8 Amps 0.4 Amps 0.8 Amps 0.4 Amps Base Panel Current Draw Standby... Alarm... 45 ma 50 ma 0 ma 70 ma 0 ma 45 ma Panel Battery Charge Capacity Up to two 8 Ah batteries Up to two 8 Ah, 7 Ah max in cabinet Auxiliary Current 0.5 Amps max. May be programmed as resetable. Auxiliary Output 9 to 5.7 Vdc IDC Alarm Current.5 ma (Consult detector compatibility list p/n 300468 for maximum detectors per circuit) IDC Circuit Maximum loop resistance: 3 Ohms; Maximum loop capacitance: 0.03 μf IDC Operating Voltage 6.3 to 5.7 Vdc UL Detector ID 00 Alarm Contact (normally open) Trouble Contact (From C) 30 Vdc @ A (resistive load) Supervisory Contact (normally open) Temperature: 3-0 F (0-49 C); Humidity: 5-93% RH, non-condensing Terminals (wire gauge) 8 - AWG (0.75 mm² -.5 mm²) Asynchronous Serial Communications Maximum resistance: 3 Ohms; Maximum capacitance: 0.03 uf REMOTE ANNUNCIATORS FSRSI Remote System Indicator FSRZI - A Remote Zone Indicator Maximum per System All panels: 0 zone panel: 4 3 or 5 zone panel: Current Requirements Standby: ma; Alarm: 48 ma Standby: 8 ma Alarm: 35 ma Voltage Range Minumum: Vdc; Maximum: 5 Vdc Maximum Circuit Capacitance 0.03 μf Maximum Circuit Resistance 3 Ohms Wire Size 8 - AWG (0.75 mm² -.5 mm²) Mounting ANSI/NEMA OSI - 996-3 gang electrical box Temperature: 3-0 F (0-49 C); Humidity: 93% RH, non-condensing DACT / DIALER Receivers Supports two receivers with two phone numbers each Communications Protocol Contact ID (SIA DC - 05), 4/ (SIA DC - 0 P3) Programming Front panel controls or PC with appropriate software Telephone Line Connection Two RJ3X (plug-to-plug) cords supplied with DACT Telephone Lines Two or one loop start lines on the public switched telephone network. Pulse or DTMF Telephone Wall Connector RJ3X / CA3X equiv or RJ38X / CA38X equiv. Communications Compliance Communications Canada CS-03; FCC / CFR 47 Parts 5 & 68; NFPA 7; UL 864; ULC S57-M87 Temperature: 3-0 F (0-49 C); Humidity: 93% RH; non-condensing Current Requirements Standby: 40 ma; Alarm: 60 ma REMOTE RELAY MODULE Configured for Zone Mode Configured for Common Mode Maximum per System 0 zone panel: 4; 3 or 5 zone panel: All panels: Current Requirements Standby: 8 ma; Alarm: 65 ma Standby: 30 ma; Alarm: 4 ma Voltage Range Minimum: 8 Vdc; Maximum: 7 Vdc Maximum Circuit Capacitance 0.03 μf Maximum Circuit Resistance 3 Ohms Wire Size 8 - AWG (0.75 mm² -.5 mm² ) Mounting Single FSRRM mounts in plastic track (included) or up to four FSRRMs in an FSRRM-S* track ordered separately. FSRRMs should be installed in an MFC-A or other listed fire alarm enclosure. Temperature: 3-0 F (0-49 C); Humidity: 93% RH, non-condensing Dimensions -3/4" W x 3-3/8" H x -/" D (65.9 mm W x 85.7 mm H x 38. mm D)
Everything you need. Nothing you don t... Programming buttons discreetly hidden from view Fully integrated DACT/dialer supports uploading or downloading of system configuration, status, and event history, and also acts as a 3-character alphanumeric display. NACs programmable by zone and individually selectable for continuous, temporal, or Genesis independent horn control outputs. On-board relays for Alarm, Supervisory and Trouble IDCs support EC Series detectors. Easy access terminal blocks Expandable Power Supply Combination Waterflow and Supervisory IDCs. IDC or NAC pairs convertible to single Class A circuits Optional Features: City Tie and Reverse Polarity Modules Remote System and Zone Indicators Remote Relay Module DACT/Dialer Trim ring for semi-flush mounting Wallboxes available with red finish
GE Security field devices U.S. T 888-378-39 F 866-503-3996 Canada T 59 376 430 F 59 376 758 Asia T 85 907 808 F 85 4 5063 Australia T 6 3 959 4700 F 6 3 959 4799 EC Series Conventional Detectors An outstanding price/performance buy, these heat and photoelectric detectors offer the kind of reliability you ve come to expect from GE Security. Genesis Horns and Strobes Ultra-slim, single- and multi-candela strobes, horns and combination devices that bring high-performance features and eye-pleasing elegance to every application. Europe T 3 75 0 F 3 7 86 3 Latin America T 305 593 430 F 305 593 4300 www.gesecurity.com 005 General Electric Company All Rights Reserved EST and FireShield are registered trademarks of GE Security, Inc. accessories In addition to the Genesis and EC product lines, GE Security products include a wide selection of equipment to meet all your small building life safety needs, including Duct Smoke Detectors Ionization Smoke Detectors Optical Beam Smoke Detectors Hazardous Location Fire Alarm Stations Hazardous Location Heat Detectors Outdoor Strobes and Horns Hazardous Location Strobes Chimes and Chime-Strobes Bell-Strobe Plates Fire Alarm Bells Single Stroke Chimes Lamp Stations Multi-Candela Strobes Horns and Sirens Multiple Tone Signals Hazardous Location Bells, Horns and Sirens Hazardous Location Multiple Tone Signals Hazardous Location Strobes Remote Booster Power Supplies Weatherproof Backboxes Alphanumeric Pager Interfaces Fire Alarm Pull Stations Key-operated Fire Alarm Stations Rechargeable Batteries Detector Wire Guards Manual Station Guards ADA Manual Station Relocators Electromagnetic Door Holders Call for Assistance Kits Multi-Voltage Control Relays Heavy Duty Power Relays Manual Override Relays imagination at work 85005-09, Issue