PO DJ INK Setup Guide
Contents How to read this manual The instructions in this manual use the indications below.! The names of channels and buttons indicated on the product, names of menus in the software, etc., are indicated within square brackets ([ ]). (e.g. [MSTE] channel, [/], [File] menu)! The version of rekordbox for mobile devices is referred to as rekordbox (ios/ ndroid).! The version of rekordbox for Mac/Windows is referred to as rekordbox (Mac/ Windows). rekordbox is used to indicate the versions of rekordbox and rekordbox (ios/ndroid) simultaneously, as well as when referring to rekordbox functions directly. Before start Purpose of this guide... General description of PO DJ INK... To make connections... bout trademarks and registered trademarks... Connecting the J-nexus and DJM-nexus/ DJM- Connecting rekordbox by wireless N... Connecting rekordbox by wired connection/connecting a device or memory card... Connecting the J-nexus and DJM-nexus Connecting rekordbox by wireless N... Connecting rekordbox by wired connection/connecting a device or memory card... Connecting the J-nexus and another mixer Connecting rekordbox by wireless N... Connecting rekordbox by wired connection/connecting a device or memory card... Connecting the J-/J- and DJM-nexus/ DJM- Connecting rekordbox by wired connection/connecting a device or memory card... Connecting the J-/J- and DJM-nexus Connecting rekordbox by wired connection/connecting a device or memory card... Connecting the J-/J- and another mixer Connecting rekordbox by wired connection/connecting a device or memory card... En
Before start Purpose of this guide This guide describes the procedures for making the connections required to use the PO DJ INK functions. Before start General description of PO DJ INK The various PO DJ INK functions provided by Pioneer can be achieved by connecting a PO DJ INK-compatible Pioneer DJ player (J-nexus/J-/J-), a DJ mixer (DJM-nexus/DJM-/DJM-nexus), or a mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed by wireless N or by N cable. The main functions that can be achieved by PO DJ INK are as follows:! Music files on a variety of mediums, such as smartphones or tablets, computers, devices or memory cards, can be sent by wireless signal or N/ cable and shared/played on up to four players.! The [ SYNC] function allows the music on up to four DJ players to be played with their tempos and beats synchronized.! The channel status (on air status and channel number) can be checked instantaneously.! The quantize function makes it possible to apply beat effects in tempo with the music. Even more functions are available when used in combination with other DJ players and DJ mixers supporting the PO DJ INK function. For details, see the respective players or mixers operating instructions. Only supported on the J-nexus. rekordbox must be installed. Music files on s or DVDs cannot be shared. To make maximum use of the PO DJ INK function The maximum advantages of the PO DJ INK function can be achieved by using music files that have been analyzed with rekordbox. Either connect a mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed directly to the DJ player, or first transfer the music files that have been analyzed with rekordbox to an memory card. rekordbox can be downloaded free of charge from the following website: http://rekordbox.com/ ecommended rekordbox versions rekordbox (ios/ndroid) Ver... or greater, Ver... or greater! For details on connections and operations of a mobile device or computer on which rekordbox is installed, see the rekordbox (ios/ndroid) user s manual or the rekordbox (Mac/Windows) operating instructions. Models supporting PO DJ INK J-nexus/J-/J- DJM-nexus/DJM-/DJM-nexus To make connections The connection procedure for using the PO DJ INK function differs according to the combination of devices you are using. This manual describes the connection procedures for different combinations of PO DJ INK-compatible Pioneer DJ players and DJ mixers. First check the combination of devices you are using on the table below, then connect following the description of the relevant page.! Ex.: If you are using a J-nexus and a DJM-nexus, you should follow procedure. Proceed to page. Those using a DJ mixer other than the Those using a DJM-nexus/DJM- Those using a DJM-nexus DJM-nexus/DJM-/DJM-nexus Those using a J-nexus Those using a DJ player other than the J-nexus Connecting by wireless N! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE.n or IEEE.g standards. Depending on the signal conditions in the usage environment and the wireless router or access point, PO DJ INK connections may not operate properly. In this case, we recommend changing the wireless router s settings. For instructions on setting the wireless router, see the wireless router s operating instructions. If the problem persists after changing the wireless router s settings, switch to wired connections.! For instructions on making the wireless N connections, see the operating instructions of your computer or wireless N device. bout trademarks and registered trademarks! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation.! Microsoft, Windows, Windows Vista, Windows XP, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ or other countries.! Mac and Mac OS a trademarks of pple Inc. registered in the United States and other countries.! ndroid is a trademark of Google Inc.! IOS is a trademark or registered trademark of Cisco in the United States and other countries and is used under license.! The names of companies and products mentioned herein are the trademarks of their respective owners. En
EQ - NOISE ZIP CUSH MIC - + - + TK OVE INST FX INK JET HPF PF PMETE HEDPHES MO SPIT STEEO MIXING - OW MSTE EVE PHES MIC EVE /DIGIT PHO MIN / MX MIN THU B THU B COSS FDE SSIGN /DIGIT INE / MX IVE SMPE UTIITY WKE UP CH SEECT MIC B M TIM TIM TIM TIM DEY MUTI TP O EV TNS GTE OVE OVE DEY O OVE OVE EFFECT SEECT + + ECHO EVEB SIP FITE PHSE SEND/ + + O ETUN EFFECT FEQUENCY OW -/ + -/ + -/ + -/ + - - - - - - - - EQ/ EQ/ EQ/ EQ/ -/ + - -/ + - / / / / / / / - -/ + - -/ + - - - - OW OW OW OW - - TIME EVE/DEPTH - - /TP TP -/ + -/ + -/ + -/ + FITE FITE / FITE FITE I MIX EMIX / /DIGIT INE / MIN MX /DIGIT PHO MIN THU B THU B COSS FDE SSIGN POFESSI MIXE / MX POWE MSTE - OVE - - - - - BNCE MO BOOTH MITO I / STT/STOP CUVE SETTING CH EQ STEEO TO EQ CH FDE COSS FDE SNPSHOT Connecting the J-nexus and DJM-nexus/DJM- - Connecting rekordbox by wireless N Equipment used! J-nexus ( units)! Wireless router with internal switching hub or access point! Mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed! DJM-nexus or DJM-! udio cable! N cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) udio cable B DJM- N cable (wired) Wireless J-nexus DJM- J-nexus Connection procedure Creating the [PYE No.] setting Check that no mobile devices, devices or memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the N cables.! The [PYE No.] setting cannot be changed if a mobile device, device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set [PYE No.] to []. [PYE No.] setting screen! [PYE No.] is set to [] upon shipment from the factory. En
PHO MSTE SIGN GND DIGIT GND - INE COD HOT MSTE - MSTE TT. CTO DIGIT EC OUT OUT DIGIT BOOTH SEND ETUN (TS) (MO) (MO) IN INE INK CTO DIGIT SIGN GND PHO DIGIT I OUT Connecting the cables (N cable and audio cables) Connect the N cable and audio cables. Connect in such a way that the DJ player s [PYE No.], the channel number of the DJ mixer s N cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect the wireless router/access point to [COMPUTE] or [COMPUTE]. Ex.: When player is connected to [CH], player is connected to [CH] and the wireless router is connected to [COMPUTE] POWE J-nexus Checking the connections POWE C IN DJM- Checking the DJ player s link established by N connection CTO CH CH CH CH CH CH COMPUTE O) CH CH CH CH INK CTO DIGIT CH CH CH CH Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG CH CH COMPUTE POWE J-nexus CTO Connecting the J-nexus and DJM-nexus/DJM-! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking that the N cable and audio cables are synchronized oad a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player s screen is the same as the channel number that lights on the DJ mixer s channel level indicator. If the numbers are different, fix the connections. TIM TIM OVE OVE + + -/ + -/ + - - - - EQ/ EQ/ -/ + - -/ + - OW - OW - - - J-nexus DJM- En
Checking the device(s) connected by wireless connection Press the [rekordbox] button. INK INFO UTIITY BCK TG TCK /EMOVE rekordbox BOWSE TG IST INFO MENU INK QUNTIZE TIME MODE Tap the [OD] icon, or click the [INK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player s screen. rekordbox (ios/ndroid) Press the DJ player s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player s screen. Ex.: When connecting a mobile device (ios/ndroid) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (ios/ndroid) This completes checking the connections. En
EQ - MIC - + - + TK OVE INST FX NOISE JET ZIP HPF CUSH PF PMETE INK HEDPHES MO SPIT STEEO MIXING - OW MSTE EVE PHES MIC EVE /DIGIT PHO EQ/ CH / /DIGIT INE / MIC SEECT B M /DIGIT INE / /DIGIT PHO / TIM TIM TIM TIM DEY MUTI TP O EV TNS GTE OVE OVE DEY O OVE OVE EFFECT SEECT + + ECHO EVEB SIP FITE PHSE SEND/ + + O ETUN EFFECT FEQUENCY OW -/ + -/ + -/ + -/ + - - - - - - - - EQ/ EQ/ EQ/ -/ + - -/ + - / / / / / / / - -/ + - -/ + - - - - OW OW OW OW - - TIME EVE/DEPTH - - /TP TP -/ + -/ + -/ + -/ + FITE FITE / FITE FITE IVE SMPE UTIITY I WKE UP MIX EMIX / THU B THU B COSS FDE SSIGN THU B THU B COSS FDE SSIGN POFESSI MIXE POWE MSTE - OVE - - - - - BNCE MO STEEO BOOTH MITO I / STT/STOP SNPSHOT CUVE SETTING CH EQ TO EQ CH FDE COSS FDE - Connecting rekordbox by wired connection/connecting a device or memory card Equipment used! J-nexus ( units)! cable (for the ipod cable, use the ipod cable included with the J-nexus.)! Mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed! device or memory card on which music files analyzed with rekordbox are stored! DJM-nexus or DJM-! udio cable! N cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) Connecting the J-nexus and DJM-nexus/DJM- B DJM- udio cable N cable (wired) connections J-nexus DJM- J-nexus Connection procedure Creating the [PYE No.] setting Check that no mobile devices, devices or memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the N cables.! The [PYE No.] setting cannot be changed if a mobile device, device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set [PYE No.] to []. [PYE No.] setting screen! [PYE No.] is set to [] upon shipment from the factory. En
PHO MSTE SIGN GND DIGIT GND COD - INE HOT MSTE - MSTE TT. CTO DIGIT EC OUT OUT DIGIT BOOTH SEND ETUN (TS) (MO) (MO) IN INE INK CTO DIGIT SIGN GND PHO DIGIT I OUT Connecting the cables (N cable and audio cables) Connect the N cable and audio cables. Connect in such a way that the DJ player s [PYE No.], the channel number of the DJ mixer s N cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect the computer to [COMPUTE] or [COMPUTE]. Ex.: When player is connected to [CH], player is connected to [CH] and the computer (Mac/Windows) is connected to [COMPUTE] CTO DIGIT POWE CTO POWE C IN CH CH CH CH CH CH COMPUTE O) CH CH CH CH INK CH CH CH CH CH CH COMPUTE POWE CTO J-nexus DJM- J-nexus Checking the connections Checking the DJ player s link established by N connection Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking that the N cable and audio cables are synchronized oad a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player s screen is the same as the channel number that lights on the DJ mixer s channel level indicator. If the numbers are different, fix the connections. TIM TIM OVE OVE + + -/ + -/ + - - - - EQ/ EQ/ -/ + - -/ + - OW - OW - - - J-nexus DJM- En
Checking the connected device(s) Press one of the medium select buttons to check the connection with the respective device. To use a computer (Mac/Windows) connected by wired N: Press the [rekordbox] button. To use a device or memory card connected to another player that is connected by link: Press the [INK] button. To use a mobile device (ios/ndroid) or device connected by wire to the " terminal": Press the [] button. To use an memory card: Press the [] button.! The following describes examples for when the [rekordbox] button is pressed and when the [] button is pressed. Press the [rekordbox] button. QUNTIZE rekordbox INK TIME MODE INK INFO BOWSE TG IST INFO MENU BCK TG TCK /EMOVE! To use a mobile device (ios/ndroid) connected by wire: Press the [] button. Tap the [OD] icon, or click the [INK] button to establish the link connection. UTIITY Connecting the J-nexus and DJM-nexus/DJM- rekordbox (ios/ndroid) The devices that have been recognized are indicated on the DJ player s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (ios/ndroid) This completes checking the connections. En
POWE MIC MSTE I STT / /STOP FO FOM MIC / INE PHO / INE INE / INE INE / INE PHO EVE DIGIT DIGIT DIGIT DIGIT / / / / UTIITY WKE UP EFFECTS TIM TIM TIM TIM OVE OVE OVE OVE OVE CH SEECT MIC MIC B MST PMETE EVE GID TP BPM MIC % ms - / - / - / - / - - - - - - - - - - X- PD EQ OW - - / - - / - - / - - / - TK OW OW OW OW OVE - - - - - - - - - - - - - - - - / - / - / - / QUN- / TP TP TIZE SPCE DUB GTE/ COO COO COO COO BNCE ECHO COMP SOUND COO FX NOISE CUSH FITE OW OW OW OW FNGE PHSE FITE OBOT INK TNS MEODIC EVEB SIP O SPI O MO STEEO ECHO EV O FDE STT DEY I FO SND/ TN MIC CF. CF.B HEDPHES BOOTH MITO MSTE MO SPIT STEEO TIME MIXING EQ CUVE TO EQ MSTE EVE EVE /DEPTH CH FDE THU B THU B THU B THU B COSS FDE COSS FDE SSIGN / PHES Connecting the J-nexus and DJM-nexus - Connecting rekordbox by wireless N Equipment used! J-nexus ( units)! Wireless router with internal switching hub! Mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed! DJM-nexus! udio cable! N cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) udio cable N cable (wired) B Wireless J-nexus DJM-nexus J-nexus Connection procedure Creating the [PYE No.] setting Check that no mobile devices, devices or memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the N cables.! The [PYE No.] setting cannot be changed if a mobile device, device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set the number to be specified for [PYE No.] (a number from to ). [PYE No.] setting screen (ex.: when set to [PYE ])! [PYE No.] is set to [] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PYE No.] flashes continuously. En
ETUN (MO) SEND (MO) SIGN GND GND HOT COD SIGN GND TS INK MIC MSTE OUT CH CH I OUT DIGIT CH IN CH Connecting the cables (N cable and audio cables) Connect the wireless router and DJM-nexus by N cable. Connect the N cable and audio cables. Connect in such a way that the DJ player s player number and the channel number of the terminals to which the DJ mixer s audio cables are connected are the same number. Ex.: When player is connected to [CH], player is connected to [CH] and the wireless router is connected to the DJ mixer POWE CTO POWE C IN J-nexus DJM-nexus CH CH INE INE /INE CH CH PHO /INE INE /INE GND CH INE /INE MSTE MSTE EC OUT BOOTH /INE CH PHO /INE SIGN MSTE EC OUT BOOTH TS Checking the connections Checking the DJ player s link established by N connection Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG POWE CTO J-nexus Connecting the J-nexus and DJM-nexus! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking that the N cable and audio cables are synchronized oad a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player s screen is the same as the channel number that lights on the DJ mixer s channel level indicator. If the numbers are different, fix the connections. TIM TIM OVE OVE - / - - / - - - - - / OW - - - / OW - - - - - J-nexus DJM-nexus En
Checking the device(s) connected by wireless connection Press the [rekordbox] button. INK INFO UTIITY BCK TG TCK /EMOVE rekordbox BOWSE TG IST INFO MENU INK QUNTIZE TIME MODE Tap the [OD] icon, or click the [INK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player s screen. rekordbox (ios/ndroid) Press the DJ player s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player s screen. Ex.: When connecting a mobile device (ios/ndroid) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (ios/ndroid) This completes checking the connections. En
POWE MIC MSTE I STT / /STOP FO FOM MIC / INE PHO / INE INE / INE INE / INE PHO EVE DIGIT DIGIT DIGIT DIGIT / / / / UTIITY WKE UP EFFECTS TIM TIM TIM TIM OVE OVE OVE OVE OVE CH SEECT MIC MIC B MST PMETE EVE GID TP BPM MIC % ms - / - / - / - / - - - - - - - - - - X- PD EQ OW - - / - - / - - / - - / - TK OW OW OW OW OVE - - - - - - - - - - - - - - - - / - / - / - / QUN- / TP TP TIZE SPCE DUB GTE/ COO COO COO COO BNCE ECHO COMP SOUND COO FX NOISE CUSH FITE OW OW OW OW FNGE PHSE FITE OBOT INK TNS MEODIC EVEB SIP O SPI O MO STEEO ECHO EV O FDE STT DEY I FO SND/ TN MIC CF. CF.B HEDPHES BOOTH MITO MSTE MO SPIT STEEO TIME MIXING EQ CUVE TO EQ MSTE EVE EVE /DEPTH CH FDE THU B THU B THU B THU B COSS FDE COSS FDE SSIGN / PHES - Connecting rekordbox by wired connection/connecting a device or memory card Equipment used! J-nexus ( units)! Switching hub! cable (for the ipod cable, use the ipod cable included with the J-nexus.)! Mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed! device or memory card on which music files analyzed with rekordbox are stored! DJM-nexus! udio cable! N cables (one for each DJ player + two more) Connections diagram (when connecting two DJ players) Connecting the J-nexus and DJM-nexus udio cable N cable (wired) B connections J-nexus DJM-nexus J-nexus Connection procedure Creating the [PYE No.] setting Check that no mobile devices, devices or memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the N cables.! The [PYE No.] setting cannot be changed if a mobile device, device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set the number to be specified for [PYE No.] (a number from to ). [PYE No.] setting screen (ex.: when set to [PYE ])! [PYE No.] is set to [] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PYE No.] flashes continuously. En
ETUN (MO) SEND (MO) SIGN GND GND HOT COD SIGN GND TS INK MIC MSTE OUT CH CH I OUT DIGIT CH IN CH Connecting the cables (N cable and audio cables) Connect the switching hub and DJM-nexus by N cable. Connect the N cable and audio cables. Connect in such a way that the DJ player s player number and the channel number of the terminals to which the DJ mixer s audio cables are connected are the same number. Ex.: When player is connected to [CH], player is connected to [CH] and the switching hub is connected to the DJ mixer POWE CTO POWE CH INE /INE CH CH PHO /INE INE /INE GND CH INE /INE CH INE /INE CH PHO /INE SIGN POWE CTO C IN MSTE MSTE EC OUT BOOTH MSTE EC OUT BOOTH TS J-nexus DJM-nexus J-nexus Checking the connections Checking the DJ player s link established by N connection Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking that the N cable and audio cables are synchronized oad a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player s screen is the same as the channel number that lights on the DJ mixer s channel level indicator. If the numbers are different, fix the connections. TIM TIM OVE OVE - / - - / - - - - - / OW - - - / OW - - - - - J-nexus DJM-nexus En
Checking the connected device(s) Press one of the medium select buttons to check the connection with the respective device. To use a computer (Mac/Windows) connected by wired N: Press the [rekordbox] button. To use a device or memory card connected to another player that is connected by link: Press the [INK] button. To use a mobile device (ios/ndroid) or device connected by wire to the " terminal": Press the [] button. To use an memory card: Press the [] button.! The following describes examples for when the [rekordbox] button is pressed and when the [] button is pressed. Press the [rekordbox] button. QUNTIZE rekordbox INK TIME MODE INK INFO BOWSE TG IST INFO MENU BCK TG TCK /EMOVE! To use a mobile device (ios/ndroid) connected by wire: Press the [] button. Tap the [OD] icon, or click the [INK] button to establish the link connection. UTIITY Connecting the J-nexus and DJM-nexus rekordbox (ios/ndroid) The devices that have been recognized are indicated on the DJ player s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (ios/ndroid) This completes checking the connections. En
MIC MIC MIC EVE MIC EQ OW TK OVE NOISE CUTTE SOUND COO FX CUSH FITE FDE STT HED PHES MO SPIT STEEO MIXING MSTE EVE PHES /INE PHO / TIM TIM TIM TIM OVE OVE OVE OVE - / - / - / - / - - - - - - - - - / - / - / - / - - - - OW OW OW OW - - - - - - - - - - - - - / - / - / - / COO COO COO COO OW THU B /INE INE / OW THU B /INE INE / OW COSS FDE SSIGN THU B /INE PHO / OW THU B MSTE EVE OVE - - - - - - POWE I / STT UTIITY /STOP WKE UP EFFECTS / TP CH SEECT MIC B MST PMETE TP BPM % ms TP BNCE FITE FNGE TNS PHSE EVEB OBOT SPI SIP O PITCH ECHO O MO STEEO ECHO EV O DEY SND/ TN MIC CF. CF.B BOOTH MITO MSTE TIME EQ CUVE TO EQ EVE /DEPTH CH FDE COSS FDE / Connecting the J-nexus and another mixer - Connecting rekordbox by wireless N Equipment used! J-nexus ( units)! Wireless router with internal switching hub! Mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed! nother DJ mixer (DJ mixer other than the DJM-nexus/DJM-/DJM-nexus)! udio cable! N cables (one for each DJ player) Connections diagram (when connecting two DJ players) DJ mixer other than the DJM-nexus/ DJM-/ DJM-nexus udio cable N cable (wired) B Wireless J-nexus J-nexus Connection procedure Creating the [PYE No.] setting Check that no mobile devices, devices or memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the N cables.! The [PYE No.] setting cannot be changed if a mobile device, device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set [PYE No.] to []. [PYE No.] setting screen! [PYE No.] is set to [] upon shipment from the factory. Connecting the cables (N cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the N cables and audio cables referring to the connections diagrams. En
Checking the connections Checking the DJ player s link established by N connection Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking the device(s) connected by wireless connection Press the [rekordbox] button. QUNTIZE rekordbox INK TIME MODE INK INFO BOWSE TG IST INFO MENU Tap the [OD] icon, or click the [INK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player s screen. UTIITY BCK TG TCK /EMOVE Connecting the J-nexus and another mixer rekordbox (ios/ndroid) Press the DJ player s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player s screen. Ex.: When connecting a mobile device (ios/ndroid) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (ios/ndroid) This completes checking the connections. En
MIC MIC MIC MIC OW NOISE TK OVE EVE EQ CUTTE SOUND COO FX CUSH FITE FDE STT HED PHES MO SPIT MIXING STEEO MSTE EVE PHES /INE PHO / OVE TIM OW THU B /INE INE / OVE TIM - / - / - / - / - - - - - - - - - / - / - / - / - - - - OW OW OW OW - - - - - - - - - - - - - / - / - / - / COO COO COO COO OW THU B /INE INE / OVE TIM OW COSS FDE SSIGN THU B /INE PHO / OVE TIM OW THU B MSTE EVE OVE - - - - - - BNCE MO STEEO BOOTH MITO EQ CUVE TO EQ CH FDE COSS FDE POWE / STT UTIITY /STOP WKE UP EFFECTS / TP SPI I CH SEECT MIC B MST PMETE TP BPM % ms FITE TNS EVEB PITCH ECHO ECHO DEY TP TIME EVE /DEPTH / FNGE PHSE OBOT SIP O O EV O SND/ TN MIC CF. CF.B MSTE - Connecting rekordbox by wired connection/connecting a device or memory card Equipment used! J-nexus ( units)! Switching hub! cable (for the ipod cable, use the ipod cable included with the J-nexus.)! Mobile device (ios/ndroid) or computer (Mac/Windows) on which rekordbox is installed! device or memory card on which music files analyzed with rekordbox are stored! nother DJ mixer (DJ mixer other than the DJM-nexus/DJM-/DJM-nexus)! udio cable! N cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) DJ mixer other than the DJM-nexus/ DJM-/ DJM-nexus udio cable N cable (wired) B connections J-nexus J-nexus Connection procedure Creating the [PYE No.] setting Check that no mobile devices, devices or memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the N cables.! The [PYE No.] setting cannot be changed if a mobile device, device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set [PYE No.] to []. [PYE No.] setting screen! [PYE No.] is set to [] upon shipment from the factory. Connecting the cables (N cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the N cables and audio cables referring to the connections diagrams. En
Checking the connections Checking the DJ player s link established by N connection Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking the connected device(s) Press one of the medium select buttons to check the connection with the respective device. To use a computer (Mac/Windows) connected by wired N: Press the [rekordbox] button. To use a device or memory card connected to another player that is connected by link: Press the [INK] button. To use a mobile device (ios/ndroid) or device connected by wire to the " terminal": Press the [] button. To use an memory card: Press the [] button.! The following describes examples for when the [rekordbox] button is pressed and when the [] button is pressed. Press the [rekordbox] button. rekordbox INK INK INFO UTIITY BOWSE TG IST INFO MENU BCK TG TCK /EMOVE Connecting the J-nexus and another mixer QUNTIZE TIME MODE! To use a mobile device (ios/ndroid) connected by wire: Press the [] button. Tap the [OD] icon, or click the [INK] button to establish the link connection. rekordbox (ios/ndroid) The devices that have been recognized are indicated on the DJ player s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (ios/ndroid) This completes checking the connections. En
HOT EC / C DIECTI FWD EV TCK SECH SECH PY / PUSE STOP TIME MODE IN / INK IN DJUST OUT DJUST - OOP OOP CUTTE EV UTIITY BOWSE TG IST INFO MENU OUT EOOP/EXIT OOP NEEDE SECH /OOP DEETE MEMOY C JOG DJUST IGHT FWD TG TCK BCK /EMOVE POWE STNDBY UNOCK OCK HEVY ESET MUTI PYE EJECT VINY SPEED DJUST TOUCH/BKE EESE/STT VINY JOG MODE J WIDE MSTE EQ - NOISE ZIP CUSH MIC - + - + TK OVE INST FX JET HPF PF PMETE INK HEDPHES MO SPIT STEEO MIXING - OW MSTE EVE PHES MIC EVE /DIGIT PHO / /DIGIT INE / MIN MX MIN THU B THU B COSS FDE SSIGN MX CH MIC SEECT B M TIM TIM TIM TIM DEY MUTI TP O EV TNS GTE OVE OVE DEY O OVE OVE EFFECT SEECT + + ECHO EVEB SIP FITE PHSE SEND/ + + O ETUN EFFECT FEQUENCY OW -/ + -/ + -/ + -/ + - - - - - - - - EQ/ EQ/ EQ/ EQ/ -/ + - -/ + - / / / / / / / - -/ + - -/ + - - - - OW OW OW OW - - TIME EVE/DEPTH - - /TP TP -/ + -/ + -/ + -/ + FITE FITE / FITE FITE IVE SMPE UTIITY WKE UP I MIX EMIX / /DIGIT INE / MIN MX /DIGIT PHO MIN THU B THU B COSS FDE SSIGN POFESSI MIXE / MX POWE MSTE - OVE - - - - - BNCE MO BOOTH MITO I / STT/STOP SNPSHOT CUVE SETTING CH EQ STEEO TO EQ CH FDE COSS FDE HOT EC / C DIECTI FWD EV TCK SECH SECH PY / PUSE STOP TIME MODE IN / INK IN DJUST OUT DJUST - OOP OOP CUTTE EV UTIITY BOWSE TG IST INFO MENU OUT EOOP/EXIT OOP NEEDE SECH /OOP DEETE MEMOY C JOG DJUST IGHT FWD TG TCK BCK /EMOVE POWE STNDBY UNOCK OCK HEVY ESET MUTI PYE EJECT VINY SPEED DJUST TOUCH/BKE EESE/STT VINY JOG MODE J WIDE MSTE Connecting the J-/J- and DJM-nexus/DJM- Connecting rekordbox by wired connection/connecting a device or memory card Equipment used! J- ( units) or J- ( units)! Computer (Mac/Windows) on which rekordbox is installed! device or memory card on which music files analyzed with rekordbox are stored! DJM-nexus or DJM-! udio cable! N cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) udio cable B DJM- N cable (wired) J- J- J- DJM- J- Connection procedure Creating the [PYE No.] setting Check that no devices or memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the N cables.! The [PYE No.] setting cannot be changed if a device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set [PYE No.] to []. [PYE No.] setting screen! [PYE No.] is set to [] upon shipment from the factory. En
UDIO OUT CTO DIGIT OUT INK PHO MSTE SIGN GND DIGIT GND COD - INE HOT MSTE - MSTE TT. CTO DIGIT EC OUT OUT DIGIT BOOTH SEND ETUN (TS) (MO) (MO) IN INE INK CTO DIGIT SIGN GND PHO DIGIT I OUT UDIO OUT CTO DIGIT OUT INK Connecting the cables (N cable and audio cables) Connect the N cable and audio cables. Connect in such a way that the channel number of the DJ mixer s N cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number. Connect the computer to [COMPUTE] or [COMPUTE]. Ex.: When player is connected to [CH], player is connected to [CH] and the computer (Mac/Windows) is connected to [COMPUTE] POWE J- Checking the connections POWE C IN DJM- CH CH CH CH CH CH COMPUTE O) CH CH CH CH INK CTO DIGIT CH CH CH CH Checking the DJ player s link established by N connection (for the J-) Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG CH CH COMPUTE POWE J-! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking the DJ player s link established by N connection (for the J-) Connecting the J-/J- and DJM-nexus/DJM- Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then check that [CNECTED] is displayed for [INK STTUS]. INK OK INK NG UTIITY UTIITY PYE No. INK STTUS STNDBY I CHNNE CNECTED PYE No. INK STTUS STNDBY I CHNNE NOT CNECTED! If [NOT CNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CNECTED] is displayed, redo the connection procedure. Checking that the N cable and audio cables are synchronized oad a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player s screen is the same as the channel number that lights on the DJ mixer s channel level indicator. If the numbers are different, fix the connections. /DIGIT PHO / /DIGIT INE / TIM OVE TIM OVE + + -/ + -/ + - - - - J- EQ/ -/ + OW EQ/ - -/ + - OW - - - - -/ + -/ + FITE FITE J- DJM- En
Checking the connected device(s) Press one of the medium select buttons to check the connection with the respective device. To use a computer (Mac/Windows) connected by wired N: Press the [INK] button. To use a device or memory card connected to another player that is connected by link: Press the [INK] button. To use a device connected by wire to the " terminal": Press the [] button. To use an memory card: Press the [] button.! The following describes an example for when using a computer (Mac/Windows) connected by wired N (for when the [INK] button is pressed). Press the [INK] button. UTIITY BCK TG TCK /EMOVE BOWSE TG IST INFO MENU INK TIME MODE Click the [INK] button to connect. The files, folders and lists loaded into the respective devices are displayed on the DJ player s screen. Ex.: When connecting a computer (Mac/Windows) This completes checking the connections. En
HOT EC / C DIECTI TCK SECH SECH PY / PUSE STOP FWD EV TIME MODE IN / INK IN DJUST OUT DJUST - OOP OOP CUTTE EV UTIITY BOWSE TG IST INFO MENU OUT EOOP/EXIT OOP NEEDE SECH /OOP DEETE MEMOY C JOG DJUST IGHT FWD TG TCK BCK /EMOVE HEVY ESET MUTI PYE POWE STNDBY UNOCK OCK VINY SPEED DJUST TOUCH/BKE EESE/STT VINY J EJECT WIDE MSTE JOG MODE POWE MIC MSTE I STT / /STOP FO FOM MIC / INE PHO / INE INE / INE INE / INE PHO EVE DIGIT DIGIT DIGIT DIGIT / / / / UTIITY WKE UP EFFECTS TIM TIM TIM TIM OVE OVE OVE OVE OVE CH SEECT MIC MIC B MST PMETE EVE GID TP BPM MIC % ms - / - / - / - / - - - - - - - - - - X- PD EQ OW - - / - - / - - / - - / - TK OW OW OW OW OVE - - - - - - - - - - - - - - - - / - / - / - / QUN- / TP TP TIZE SPCE DUB GTE/ COO COO COO COO BNCE ECHO COMP SOUND COO FX NOISE CUSH FITE OW OW OW OW FNGE PHSE FITE OBOT INK TNS MEODIC EVEB SIP O SPI O MO STEEO ECHO EV O FDE STT DEY I FO SND/ TN MIC CF. CF.B HEDPHES BOOTH MITO MSTE MO SPIT STEEO TIME MIXING EQ CUVE TO EQ MSTE EVE EVE /DEPTH CH FDE THU B THU B THU B THU B COSS FDE COSS FDE SSIGN / PHES HOT EC / C DIECTI FWD EV TCK SECH SECH PY / PUSE STOP TIME MODE IN / INK IN DJUST OUT DJUST - OOP OOP CUTTE EV UTIITY BOWSE TG IST INFO MENU OUT EOOP/EXIT OOP NEEDE SECH /OOP DEETE MEMOY C JOG DJUST IGHT FWD TG TCK BCK /EMOVE POWE STNDBY UNOCK OCK HEVY ESET MUTI PYE EJECT VINY SPEED DJUST TOUCH/BKE EESE/STT VINY JOG MODE J WIDE MSTE Connecting the J-/J- and DJM-nexus Connecting rekordbox by wired connection/connecting a device or memory card Equipment used! J- ( units) or J- ( units)! Switching hub! Computer (Mac/Windows) on which rekordbox is installed! device or memory card on which music files analyzed with rekordbox are stored! DJM-nexus! udio cable! N cables (one for each DJ player + two more) Connections diagram (when connecting two DJ players) Connecting the J-/J- and DJM-nexus udio cable B N cable (wired) J- J- J- DJM-nexus J- Connection procedure Creating the [PYE No.] setting Check that no devices or memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the N cables.! The [PYE No.] setting cannot be changed if a device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set the number to be specified for [PYE No.] (a number from to ). [PYE No.] setting screen (ex.: when set to [PYE ])! [PYE No.] is set to [] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PYE No.] flashes continuously. En
UDIO OUT CTO DIGIT OUT INK ETUN (MO) SEND (MO) SIGN GND GND HOT COD SIGN GND TS INK MIC MSTE OUT CH CH I OUT DIGIT CH IN CH UDIO OUT CTO DIGIT OUT INK Connecting the cables (N cable and audio cables) Connect the switching hub and DJM-nexus by N cable. Connect the N cable and audio cables. Connect in such a way that the DJ player s player number and the channel number of the terminals to which the DJ mixer s audio cables are connected are the same number. Ex.: When player is connected to [CH], player is connected to [CH] and the computer (Mac/Windows) is connected to the DJ mixer POWE POWE CH INE /INE CH CH PHO /INE INE /INE GND CH INE /INE CH INE /INE CH PHO /INE SIGN POWE C IN MSTE MSTE EC OUT BOOTH MSTE EC OUT BOOTH TS J- DJM-nexus J- Checking the connections Checking the DJ player s link established by N connection (for the J-) Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking the DJ player s link established by N connection (for the J-) Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then check that [CNECTED] is displayed for [INK STTUS]. INK OK INK NG UTIITY UTIITY PYE No. INK STTUS STNDBY I CHNNE CNECTED PYE No. INK STTUS STNDBY I CHNNE NOT CNECTED! If [NOT CNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CNECTED] is displayed, redo the connection procedure. Checking that the N cable and audio cables are synchronized oad a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player s screen is the same as the channel number that lights on the DJ mixer s channel level indicator. If the numbers are different, fix the connections. /DIGIT PHO / /DIGIT INE / TIM OVE TIM OVE + + -/ + -/ + - - - - J- EQ/ -/ + OW EQ/ - -/ + - OW - - - - -/ + -/ + FITE FITE J- DJM- En
Checking the connected device(s) Press one of the medium select buttons to check the connection with the respective device. To use a computer (Mac/Windows) connected by wired N: Press the [INK] button. To use a device or memory card connected to another player that is connected by link: Press the [INK] button. To use a device connected by wire to the " terminal": Press the [] button. To use an memory card: Press the [] button.! The following describes an example for when using a computer (Mac/Windows) connected by wired N (for when the [INK] button is pressed). Press the [INK] button. UTIITY BCK TG TCK /EMOVE BOWSE TG IST INFO MENU INK TIME MODE Click the [INK] button to connect. The files, folders and lists loaded into the respective devices are displayed on the DJ player s screen. Connecting the J-/J- and DJM-nexus Ex.: When connecting a computer (Mac/Windows) This completes checking the connections. En
HOT EC / C DIECTI FWD EV TCK SECH SECH PY / PUSE STOP TIME MODE IN / INK IN DJUST OUT DJUST - OOP OOP CUTTE EV UTIITY BOWSE TG IST INFO MENU OUT EOOP/EXIT OOP NEEDE SECH /OOP DEETE MEMOY C JOG DJUST IGHT FWD TG TCK BCK /EMOVE POWE STNDBY UNOCK OCK HEVY ESET MUTI PYE EJECT VINY SPEED DJUST TOUCH/BKE EESE/STT VINY JOG MODE J WIDE MSTE MIC MIC MIC EVE MIC EQ OW TK OVE NOISE CUTTE SOUND COO FX CUSH FITE FDE STT HED PHES MO SPIT STEEO MIXING MSTE EVE PHES /INE PHO / OVE TIM - / - / - / - / - - - - - - - - - / - / - / - / - - - - OW OW OW OW - - - - - - - - - - - - - / - / - / - / COO COO COO COO OW THU B /INE INE / OVE TIM OW THU B /INE INE / OVE TIM OW COSS FDE SSIGN THU B /INE PHO / OVE TIM OW THU B MSTE EVE OVE - - - - - - BNCE POWE I / STT UTIITY /STOP WKE UP EFFECTS / TP CH SEECT MIC B MST PMETE TP BPM % ms TP FITE FNGE TNS PHSE EVEB OBOT SPI SIP O PITCH ECHO O MO STEEO ECHO EV O DEY SND/ TN MIC CF. CF.B BOOTH MITO MSTE EQ CUVE TO EQ CH FDE COSS FDE TIME EVE /DEPTH / HOT EC / C DIECTI FWD EV TCK SECH SECH PY / PUSE STOP TIME MODE IN / INK IN DJUST OUT DJUST - OOP OOP CUTTE EV UTIITY BOWSE TG IST INFO MENU OUT EOOP/EXIT OOP NEEDE SECH /OOP DEETE MEMOY C JOG DJUST IGHT FWD TG TCK BCK /EMOVE POWE STNDBY UNOCK OCK HEVY ESET MUTI PYE EJECT VINY SPEED DJUST TOUCH /BKE EESE/STT VINY JOG MODE J WIDE MSTE Connecting the J-/J- and another mixer Connecting rekordbox by wired connection/connecting a device or memory card Equipment used! J- ( units) or J- ( units)! Switching hub! Computer (Mac/Windows) on which rekordbox is installed! device or memory card on which music files analyzed with rekordbox are stored! nother DJ mixer (DJ mixer other than the DJM-nexus/DJM-/DJM-nexus)! udio cable! N cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) DJ mixer other than the DJM-nexus/ DJM-/ DJM-nexus udio cable B N cable (wired) J- J- J- J- Connection procedure Creating the [PYE No.] setting Check that no devices or memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the N cables.! The [PYE No.] setting cannot be changed if a device or memory card is connected or if a link is established. Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then set the number to be specified for [PYE No.] (a number from to ). [PYE No.] setting screen (ex.: when set to [PYE ])! [PYE No.] is set to [] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PYE No.] flashes continuously. Connecting the cables (N cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the N cables and audio cables referring to the connections diagrams. En
Checking the connections Checking the DJ player s link established by N connection (for the J-) Check that the player number indicated on the DJ player s screen is lit in white. INK OK INK NG! If the player number indicated on the DJ player s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. Checking the DJ player s link established by N connection (for the J-) Press the DJ player s [MENU/UTIITY] button for over second to open the UTIITY screen, then check that [CNECTED] is displayed for [INK STTUS]. INK OK INK NG UTIITY UTIITY PYE No. INK STTUS STNDBY I CHNNE CNECTED PYE No. INK STTUS STNDBY I CHNNE NOT CNECTED! If [NOT CNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CNECTED] is displayed, redo the connection procedure. Checking the connected device(s) Press one of the medium select buttons to check the connection with the respective device. To use a computer (Mac/Windows) connected by wired N: Press the [INK] button. To use a device or memory card connected to another player that is connected by link: Press the [INK] button. To use a device connected by wire to the " terminal": Press the [] button. To use an memory card: Press the [] button.! The following describes an example for when using a computer (Mac/Windows) connected by wired N (for when the [INK] button is pressed). Press the [INK] button. Connecting the J-/J- and another mixer UTIITY BCK TG TCK /EMOVE BOWSE TG IST INFO MENU INK TIME MODE Click the [INK] button to connect. En
The files, folders and lists loaded into the respective devices are displayed on the DJ player s screen. Ex.: When connecting a computer (Mac/Windows) This completes checking the connections. PIEE COPOTI. ll rights reserved. PIEE COPOTI -, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa -, Japan <DI-B> En