Attachment to GB/FME/ExTR08.006/05 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FEP315abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. Page 1 of 7

Attachment to GB/FME/ExTR08.006/05 i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEH325abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y Page 2 of 7

Attachment to GB/FME/ExTR08.006/05 h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3, or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqr Transmitter FET525jk0Mnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. FET325jklLnopqr Transmitter FET525jklLnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, or 2 n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. Marking Ex na IIC T*- FEP325/FEH325 Remote Ex na nl IIC T*- FNICO field device- FEP325/FEH325 Remote - Ex na nc IIC T*- FEP315/FEH315 - Integral [Ex ia] IIC T*- FISCO field device- FEP315/FEH315 Integral - Ex td A21 IP6x T85 C...Tmedium - FEP325/FEH325 - Remote Ex td A21 IP6x T70 C...Tmedium - FEP315/FEH315 - Integral Ex d e ia ma IIC T* FEH315 L Integral DN3 DN100 Ex iad td A21 IP6x T* FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device- FEH315 L Integral DN3 DN100 Ex d e ia ma IIC T* FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device- FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device- FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* FEP315 L Integral DN3-300 Page 3 of 7

Attachment to GB/FME/ExTR08.006/05 Ex td iad A21 IP6x T* -FISCO field device- FEP315 L Integral DN3-300 Ex d e ia IIC T* FEP315 L Integral DN350-2000 Ex td iad A21 IP6x T* -FISCO field device- FEH315 L Integral DN350 DN2000 Ex iad td A21 IP6x T* FEP315 L Integral DN350-2000 Ex d e [ia] IIC Tx FET325 L Remote - Transmitter Ex td [iad] A21 IP6x FET325 L Remote - Transmitter Ex e ia IIC T* FEP325 L Remote - DN350-2000 [Ex ia] IIC - FISCO field device- FEP325 L Remote - DN350-2000 Ex td A21 IP6x T* FEP325 L Remote - DN350-2000 Ex e ia ma IIC T* FEP325 L Remote DN3-300 [Ex ia] IIC - FISCO field device- FEP325 L Remote - DN3-300 Ex td A21 IP6x T* FEP325 L Remote DN3-300 Ex na nc IIC T4 - FET325 Transmitter only Ex na nl IIC T*- FNICO field device- FET325 Transmitter only Ex td A21 IP6x T70 C - FET325 Transmitter only Ex na IIC T*- FEP525/FEH525 Remote Ex na nl IIC T*- FNICO field device- FEP525/FEH525 Remote - Ex na nc IIC T*- FEP515/FEH515 - Integral [Ex ia] IIC - FISCO field device- FEP515/FEH515 Integral - Ex td A21 IP6x T85 C...Tmedium FEP525/FEH525 - Remote Ex td A21 IP6x T70 C...Tmedium FEP515/FEH515 - Integral Ex d e ia ma IIC T* FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device- FEH515 L Integral DN3 DN100 Ex d e ia ma IIC T* FEP515 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device- FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device- FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* FEP515 L Integral DN3-300 Ex d e ia IIC T* FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* FEP515 L Integral DN350-2000 Ex d e [ia] IIC Tx FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device- FET525 L Remote - Transmitter Ex [ia] IIC Tx FET525 L Remote - Transmitter Ex td [iad] A21 IP6x FET525 L Remote - Transmitter [Ex ia] IIC - FISCO field device- FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* FEP525 L Remote - DN350-2000 Ex e ia ma IIC T* FEP525 L Remote DN3-300 [Ex ia] IIC - FISCO field device- FEP525 L Remote - DN3-300 Ex td A21 IP6x T* FEP525 L Remote DN3-300 Ex na nc IIC T4 FET525 Transmitter only Ex na nl IIC T*- FNICO field device- FET525 Transmitter only Ex td A21 IP6x T70 C FET525 Transmitter only Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Page 4 of 7

Attachment to GB/FME/ExTR08.006/05 Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular Field Housing. This is common for all versions of the electronics housing discussed in this report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm standoff between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315 /FEP515 FEH315 /FEH515 HART Communication Current Output 1 active/ passive 31/32 Digital Output DO2 passive 41/42 Digital Output DO1 active/ passive 51/52 Digital Input* passive 81/82 Operating Value U N [V] I N [ma] 30 30 30 220 30 220 30 10 * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Page 5 of 7

Attachment to GB/FME/ExTR08.006/05 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) Ex i / IS FET_25...(L,R) PA/FF communication [V] [ma] [mw] [nf] [nf] [uh] Fieldbus Pulse Output DO2 97/98 41/42 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) Ex i / IS FET_25...(L,R) PA/FF communication [V] [ma] [mw] [nf] [nf] [uh] Fieldbus Pulse Output DO2 97/98 41/42 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Page 6 of 7

Attachment to GB/FME/ExTR08.006/05 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

Attachment to GB/FME/ExTR08.006/05 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FEP315abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. Page 1 of 7

Attachment to GB/FME/ExTR08.006/05 i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEH325abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y Page 2 of 7

Attachment to GB/FME/ExTR08.006/05 h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3, or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqr Transmitter FET525jk0Mnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. FET325jklLnopqr Transmitter FET525jklLnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, or 2 n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. Marking Ex na IIC T*- FEP325/FEH325 Remote Ex na nl IIC T*- FNICO field device- FEP325/FEH325 Remote - Ex na nc IIC T*- FEP315/FEH315 - Integral [Ex ia] IIC T*- FISCO field device- FEP315/FEH315 Integral - Ex td A21 IP6x T85 C...Tmedium - FEP325/FEH325 - Remote Ex td A21 IP6x T70 C...Tmedium - FEP315/FEH315 - Integral Ex d e ia ma IIC T* FEH315 L Integral DN3 DN100 Ex iad td A21 IP6x T* FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device- FEH315 L Integral DN3 DN100 Ex d e ia ma IIC T* FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device- FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device- FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* FEP315 L Integral DN3-300 Page 3 of 7

Attachment to GB/FME/ExTR08.006/05 Ex td iad A21 IP6x T* -FISCO field device- FEP315 L Integral DN3-300 Ex d e ia IIC T* FEP315 L Integral DN350-2000 Ex td iad A21 IP6x T* -FISCO field device- FEH315 L Integral DN350 DN2000 Ex iad td A21 IP6x T* FEP315 L Integral DN350-2000 Ex d e [ia] IIC Tx FET325 L Remote - Transmitter Ex td [iad] A21 IP6x FET325 L Remote - Transmitter Ex e ia IIC T* FEP325 L Remote - DN350-2000 [Ex ia] IIC - FISCO field device- FEP325 L Remote - DN350-2000 Ex td A21 IP6x T* FEP325 L Remote - DN350-2000 Ex e ia ma IIC T* FEP325 L Remote DN3-300 [Ex ia] IIC - FISCO field device- FEP325 L Remote - DN3-300 Ex td A21 IP6x T* FEP325 L Remote DN3-300 Ex na nc IIC T4 - FET325 Transmitter only Ex na nl IIC T*- FNICO field device- FET325 Transmitter only Ex td A21 IP6x T70 C - FET325 Transmitter only Ex na IIC T*- FEP525/FEH525 Remote Ex na nl IIC T*- FNICO field device- FEP525/FEH525 Remote - Ex na nc IIC T*- FEP515/FEH515 - Integral [Ex ia] IIC - FISCO field device- FEP515/FEH515 Integral - Ex td A21 IP6x T85 C...Tmedium FEP525/FEH525 - Remote Ex td A21 IP6x T70 C...Tmedium FEP515/FEH515 - Integral Ex d e ia ma IIC T* FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device- FEH515 L Integral DN3 DN100 Ex d e ia ma IIC T* FEP515 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device- FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device- FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* FEP515 L Integral DN3-300 Ex d e ia IIC T* FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* FEP515 L Integral DN350-2000 Ex d e [ia] IIC Tx FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device- FET525 L Remote - Transmitter Ex [ia] IIC Tx FET525 L Remote - Transmitter Ex td [iad] A21 IP6x FET525 L Remote - Transmitter [Ex ia] IIC - FISCO field device- FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* FEP525 L Remote - DN350-2000 Ex e ia ma IIC T* FEP525 L Remote DN3-300 [Ex ia] IIC - FISCO field device- FEP525 L Remote - DN3-300 Ex td A21 IP6x T* FEP525 L Remote DN3-300 Ex na nc IIC T4 FET525 Transmitter only Ex na nl IIC T*- FNICO field device- FET525 Transmitter only Ex td A21 IP6x T70 C FET525 Transmitter only Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Page 4 of 7

Attachment to GB/FME/ExTR08.006/05 Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular Field Housing. This is common for all versions of the electronics housing discussed in this report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm standoff between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315 /FEP515 FEH315 /FEH515 HART Communication Current Output 1 active/ passive 31/32 Digital Output DO2 passive 41/42 Digital Output DO1 active/ passive 51/52 Digital Input* passive 81/82 Operating Value U N [V] I N [ma] 30 30 30 220 30 220 30 10 * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Page 5 of 7

Attachment to GB/FME/ExTR08.006/05 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) Ex i / IS FET_25...(L,R) PA/FF communication [V] [ma] [mw] [nf] [nf] [uh] Fieldbus Pulse Output DO2 97/98 41/42 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) Ex i / IS FET_25...(L,R) PA/FF communication [V] [ma] [mw] [nf] [nf] [uh] Fieldbus Pulse Output DO2 97/98 41/42 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Page 6 of 7

Attachment to GB/FME/ExTR08.006/05 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx FME 08.0004 issue No.:7 Status: Current Date of Issue: 2011-07-13 Page 1 of 4 Applicant: ABB Automation Products GmbH Dransfelder Str. 2 D-37079-Göttingen Germany Certificate history: Issue No. 7 (2011-7-13) Issue No. 6 (2010-12- 15) Issue No. 5 (2010-9-15) Issue No. 4 (2010-8-9) Issue No. 3 (2009-11- 12) Issue No. 2 (2009-9-7) Issue No. 1 (2009-7-24) Issue No. 0 (2009-1-14) Electrical Apparatus: Optional accessory: HygienicMaster and ProcessMaster Electromagnetic Flowmeters Type of Protection: Type of Protection "n"; Protection by enclosures td ; Flameproof "d"; Increased safety "e"; Intrinsic safety "i" & encapsulated "m" Marking: See Attachment Approved for issue on behalf of the IECEx Certification Body: Position: Andrew Was Certification Manager Signature: (for printed version) Date: 1. This certificate and schedule may only be reproduced in full. 2. This certificate is not transferable and remains the property of the issuing body. 3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website. Certificate issued by: FM Approvals Ltd 1 Windsor Dials SL4 1RS Windsor United Kingdom

IECEx Certificate of Conformity Certificate No.: IECEx FME 08.0004 Date of Issue: 2011-07-13 Issue No.: 7 Page 2 of 4 Manufacturer: ABB Automation Products GmbH Dransfelder Str. 2 D-37079-Göttingen Germany Manufacturing location(s): ABB Engineering (Shanghai) Ltd No.5, Lane 369, Chuangye Road Kangqiao Town, Pudong New District Shanghai, 201319 China This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended. STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards: IEC 60079-0 : 2004 Edition: 4.0 IEC 60079-1 : 2007-04 Edition: 6 IEC 60079-11 : 2006 Edition: 5 IEC 60079-15 : 2005-03 Edition: 3 IEC 60079-18 : 2004 Edition: 2.0 IEC 60079-27 : 2005-04 Edition: 1.0 IEC 60079-7 : 2006-07 Edition: 4 IEC 61241-0 : 2004 Edition: 1 IEC 61241-1 : 2004 Edition: 1 IEC 61241-11 : 2005 Edition: 1 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and Marking of Type of Protection "n" electrical apparatus Electrical apparatus for explosive gas atmospheres - Part 18: Construction, test and marking of type of protection encapsulation 'm' electrical apparatus Electrical apparatus for explosive atmospheres- Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FINCO) Explosive atmospheres - Part 7: Equipment protection by increased safety "e" Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "td" Electrical apparatus for use in the pressence of combustible dusts - Part 11: Protection by intrinsic safety 'id' This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above. TEST & ASSESSMENT REPORTS: A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in Test Report: GB/FME/ExTR08.0006/00 GB/FME/ExTR08.0006/01 GB/FME/ExTR08.0006/02 GB/FME/ExTR08.0006/03 GB/FME/ExTR08.0006/04 GB/FME/ExTR08.0006/05 GB/FME/ExTR08.0006/06 GB/FME/ExTR08.0006/07 Quality Assessment Report: DE/TUN/QAR06.0010/01 GB/FME/QAR10.0007/00

IECEx Certificate of Conformity Certificate No.: IECEx FME 08.0004 Date of Issue: 2011-07-13 Issue No.: 7 Page 3 of 4 Schedule EQUIPMENT: Equipment and systems covered by this certificate are as follows: See Attachment CONDITIONS OF CERTIFICATION: NO

IECEx Certificate of Conformity Certificate No.: IECEx FME 08.0004 Date of Issue: 2011-07-13 Issue No.: 7 Page 4 of 4 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above): Ammendment to existing COC and ATEX/ IECEx Certificates and FM Approvals US/CA with altrenative liner materials Hard rubber (ZH) und PTFE (ZH) with Model No change & New subcontractor Dynacast Shanghai for box high version Zone 1 & Alternative name plate foils materials & Alternative I-O Transformers from the firm of POLFER S.A. & electronic component removal from the IR- Diode circuit on the Displayboard. Annexe: Attachment GBFMEExTR080006_07.doc

Attachment to GB/FME/ExTR08.006/07 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FEP315abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. Page 1 of 7

Attachment to GB/FME/ExTR08.006/07 i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEH325abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y Page 2 of 7

Attachment to GB/FME/ExTR08.006/07 h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3, or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqr Transmitter FET525jk0Mnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. FET325jklLnopqr Transmitter FET525jklLnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, or 2 n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. Marking Ex na nc IIC T* - FEP315 M /FEH315 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP315 M /FEH315 Integral Ex na nc nl IIC T*- FNICO field device - FEP315 M /FEH315 Integral Ex na nc IIC T* - FEP515 M /FEH515 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP515 M /FEH515 Integral Ex na nc nl IIC T*- FNICO field device - FEP515 M /FEH315 Integral Ex d e ia ma IIC T* - FEH315 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device - FEH315 L Integral DN3 DN100 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia ma IIC T* - FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device - FEH515 L Integral DN3 DN100 [Ex ia] IIC - FISCO field device - FEP515 L /FEH515 Integral Page 3 of 7

Attachment to GB/FME/ExTR08.006/07 Ex d e ia ma IIC T* - FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP315 L Integral DN3-300 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FEP515 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* - FEP515 L Integral DN3-300 Ex d e ia IIC T* - FEP315 L Integral - DN350-2000 Ex iad td A21 IP6x T* - FEP315 L Integral - DN350-2000 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral - DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia IIC T* - FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* - FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* - FEP515 L Integral DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral - Ex na IIC T* - FEP325 M /FEH325 Remote Ex na nl IIC T*- FNICO field device - FEP325 M /FEH325 Remote Ex td A21 IP6x T85 C...Tmedium - FEP325 M /FEH325 - Remote Ex na IIC T* - FEP525 M /FEH525 Remote Ex na nl IIC T*- FNICO field device - FEP525 M /FEH525 Remote Ex td A21 IP6x T85 C...Tmedium - FEP525 M /FEH525 - Remote Ex e ia ma IIC T* - FEP325 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN3-300 Ex td A21 IP6x T* - FEP325 L Remote - DN3-300 Ex e ia ma IIC T* - FEP525 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN3-300 Ex td A21 IP6x T* - FEP525 L Remote - DN3-300 Ex e ia IIC T* - FEP325 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN350 2000 Ex td A21 IP6x T* - FEP325 L Remote - DN350 2000 Ex e ia IIC T* - FEP525 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* - FEP525 L Remote - DN350-2000 Ex na nc IIC T4 - FET325 M Transmitter only Ex na nl IIC T*- FNICO field device - FET325 M Transmitter only Ex td A21 IP6x T70 C - FET325 M Transmitter only Ex na nc IIC T4 - FET525 M Transmitter only Ex na nl IIC T*- FNICO field device - FET525 M Transmitter only Ex td A21 IP6x T70 C - FET525 M Transmitter only Ex d e [ia] IIC Tx - FET325 L Remote - Transmitter [Ex ia] IIC - FISCO field device - FET325 L Remote Transmitter Ex td [iad] A21 IP6x - FET325 L Remote Transmitter Ex d e [ia] IIC Tx - FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device - FET525 L Remote - Transmitter Ex [ia] IIC Tx - FET525 L Remote - Transmitter Ex td [iad] A21 IP6x - FET525 L Remote Transmitter Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Page 4 of 7

Attachment to GB/FME/ExTR08.006/07 Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular Field Housing. This is common for all versions of the electronics housing discussed in this report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm standoff between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315 /FEP515 FEH315 /FEH515 HART Communication Current Output 1 active/ passive 31/32 Digital Output DO2 passive 41/42 Digital Output DO1 active/ passive 51/52 Digital Input* passive 81/82 Operating Value U N [V] I N [ma] 30 30 30 220 30 220 30 10 * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Page 5 of 7

Attachment to GB/FME/ExTR08.006/07 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) Ex i / IS FET_25...(L,R) PA/FF communication [V] [ma] [mw] [nf] [nf] [uh] Fieldbus Pulse Output DO2 97/98 41/42 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) Ex i / IS FET_25...(L,R) PA/FF communication [V] [ma] [mw] [nf] [nf] [uh] Fieldbus Pulse Output DO2 97/98 41/42 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Page 6 of 7

Attachment to GB/FME/ExTR08.006/07 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

Attachment to GB/FME/ExTR08.006/07 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FEP315abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrst ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, or E7 g = Process connection material; B, C, or D h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. Page 1 of 7

Attachment to GB/FME/ExTR08.006/07 i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrst HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN FEH325abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, or P c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y Page 2 of 7

Attachment to GB/FME/ExTR08.006/07 h = Usage certifications; 0, 1, 2, 3, 4, 5, 6, or 7. i = Calibration type; A, B, K, L, M, or T j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3, or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqr Transmitter FET525jk0Mnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. FET325jklLnopqr Transmitter FET525jklLnopqr Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; A, B, C, S, T or U l = Signal Cable length and type: 0, 1, or 2 n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. Marking Ex na nc IIC T* - FEP315 M /FEH315 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP315 M /FEH315 Integral Ex na nc nl IIC T*- FNICO field device - FEP315 M /FEH315 Integral Ex na nc IIC T* - FEP515 M /FEH515 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP515 M /FEH515 Integral Ex na nc nl IIC T*- FNICO field device - FEP515 M /FEH315 Integral Ex d e ia ma IIC T* - FEH315 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device - FEH315 L Integral DN3 DN100 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia ma IIC T* - FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device - FEH515 L Integral DN3 DN100 [Ex ia] IIC - FISCO field device - FEP515 L /FEH515 Integral Page 3 of 7

Attachment to GB/FME/ExTR08.006/07 Ex d e ia ma IIC T* - FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP315 L Integral DN3-300 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FEP515 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* - FEP515 L Integral DN3-300 Ex d e ia IIC T* - FEP315 L Integral - DN350-2000 Ex iad td A21 IP6x T* - FEP315 L Integral - DN350-2000 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral - DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia IIC T* - FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* - FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* - FEP515 L Integral DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral - Ex na IIC T* - FEP325 M /FEH325 Remote Ex na nl IIC T*- FNICO field device - FEP325 M /FEH325 Remote Ex td A21 IP6x T85 C...Tmedium - FEP325 M /FEH325 - Remote Ex na IIC T* - FEP525 M /FEH525 Remote Ex na nl IIC T*- FNICO field device - FEP525 M /FEH525 Remote Ex td A21 IP6x T85 C...Tmedium - FEP525 M /FEH525 - Remote Ex e ia ma IIC T* - FEP325 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN3-300 Ex td A21 IP6x T* - FEP325 L Remote - DN3-300 Ex e ia ma IIC T* - FEP525 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN3-300 Ex td A21 IP6x T* - FEP525 L Remote - DN3-300 Ex e ia IIC T* - FEP325 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN350 2000 Ex td A21 IP6x T* - FEP325 L Remote - DN350 2000 Ex e ia IIC T* - FEP525 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* - FEP525 L Remote - DN350-2000 Ex na nc IIC T4 - FET325 M Transmitter only Ex na nl IIC T*- FNICO field device - FET325 M Transmitter only Ex td A21 IP6x T70 C - FET325 M Transmitter only Ex na nc IIC T4 - FET525 M Transmitter only Ex na nl IIC T*- FNICO field device - FET525 M Transmitter only Ex td A21 IP6x T70 C - FET525 M Transmitter only Ex d e [ia] IIC Tx - FET325 L Remote - Transmitter [Ex ia] IIC - FISCO field device - FET325 L Remote Transmitter Ex td [iad] A21 IP6x - FET325 L Remote Transmitter Ex d e [ia] IIC Tx - FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device - FET525 L Remote - Transmitter Ex [ia] IIC Tx - FET525 L Remote - Transmitter Ex td [iad] A21 IP6x - FET525 L Remote Transmitter Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Page 4 of 7

Attachment to GB/FME/ExTR08.006/07 Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular Field Housing. This is common for all versions of the electronics housing discussed in this report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm standoff between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315 /FEP515 FEH315 /FEH515 HART Communication Current Output 1 active/ passive 31/32 Digital Output DO2 passive 41/42 Digital Output DO1 active/ passive 51/52 Digital Input* passive 81/82 Operating Value U N [V] I N [ma] 30 30 30 220 30 220 30 10 * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Page 5 of 7

Attachment to GB/FME/ExTR08.006/07 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Page 6 of 7

Attachment to GB/FME/ExTR08.006/07 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

Attachment to GB/FME/ExTR08.006/09 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FET3** Transmitter FET5** Transmitter FEP315abcdefghijk0mnopqrstu ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrstu ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U, D, T or W c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, B3, B6, B7, B8, B9, C1, C2, C3, C4, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, E7, or E8 g = Process connection material; B, C, or D h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits ; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1 or H2 FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, B3, B6, B7, B8, B9, C1, C2, C3, C4, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, E7, or E8 g = Process connection material; B, C, or D h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter Page 1 of 7

Attachment to GB/FME/ExTR08.006/09 l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrstu HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrstu HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single number m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1 or H2 FEH325abcdefghijk0Mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0Mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 n = Protection Class: 1, 2, 3, or 4 Page 2 of 7

Attachment to GB/FME/ExTR08.006/09 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqru Transmitter FET525jk0Mnopqru Transmitter a j = k = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 Name plate language and type; Any single letter n = Protection Class: 1 or 4 b o = p = Cable Conduits; A, B, or C Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F c r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. u = Transmitter housing design; H1 or H2 d = FET325jklLnopqrH2 Transmitter FET525jklLnopqrH2 Transmitter e = a j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter f l = Signal Cable length and type: 0, 1, or 2 b n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p g = Power supply; 1, 2, 3, or 4 c q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. h = d = Marking i = e Ex = na nc IIC T* - FEP315 M /FEH315 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP315 M /FEH315 Integral Ex na nc nl IIC T*- FNICO field device - FEP315 M /FEH315 Integral Ex na nc IIC T* - FEP515 M /FEH515 - Integral f = Ex td A21 IP6x T70 C...Tmedium - FEP515 M /FEH515 Integral Ex na nc nl IIC T*- FNICO field device - FEP515 M /FEH315 Integral Ex d e ia ma IIC T* - FEH315 L Integral DN3 DN100 g = Ex iad td A21 IP6x T* - FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device - FEH315 L Integral DN3 DN100 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex h = d e ia ma IIC T* - FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device - FEH515 L Integral DN3 DN100 [Ex i = ia] IIC - FISCO field device - FEP515 L /FEH515 Integral Ex d e ia ma IIC T* - FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP315 L Integral DN3-300 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FEP515 L Integral DN3-300 Page 3 of 7

Attachment to GB/FME/ExTR08.006/09 Ex d e ia ma IIC T*- FISCO field device - FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* - FEP515 L Integral DN3-300 Ex d e ia IIC T* - FEP315 L Integral - DN350-2000 Ex iad td A21 IP6x T* - FEP315 L Integral - DN350-2000 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral - DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia IIC T* - FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* - FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* - FEP515 L Integral DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral - Ex na IIC T* - FEP325 M /FEH325 Remote Ex na nl IIC T*- FNICO field device - FEP325 M /FEH325 Remote Ex td A21 IP6x T85 C...Tmedium - FEP325 M /FEH325 - Remote Ex na IIC T* - FEP525 M /FEH525 Remote Ex na nl IIC T*- FNICO field device - FEP525 M /FEH525 Remote Ex td A21 IP6x T85 C...Tmedium - FEP525 M /FEH525 - Remote Ex e ia ma IIC T* - FEP325 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN3-300 Ex td A21 IP6x T* - FEP325 L Remote - DN3-300 Ex e ia ma IIC T* - FEP525 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN3-300 Ex td A21 IP6x T* - FEP525 L Remote - DN3-300 Ex e ia IIC T* - FEP325 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN350 2000 Ex td A21 IP6x T* - FEP325 L Remote - DN350 2000 Ex e ia IIC T* - FEP525 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* - FEP525 L Remote - DN350-2000 Ex na nc IIC T4 - FET325 M Transmitter only Ex na nl IIC T*- FNICO field device - FET325 M Transmitter only Ex td A21 IP6x T70 C - FET325 M Transmitter only Ex na nc IIC T4 - FET525 M Transmitter only Ex na nl IIC T*- FNICO field device - FET525 M Transmitter only Ex td A21 IP6x T70 C - FET525 M Transmitter only Ex d e [ia] IIC T* - FET325 L Remote - Transmitter [Ex ia] IIC - FISCO field device - FET325 L Remote Transmitter Ex td [iad] A21 IP6x - FET325 L Remote Transmitter Ex d e [ia] IIC T* - FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device - FET525 L Remote - Transmitter Ex [ia] IIC T* - FET525 L Remote - Transmitter Ex td [iad] A21 IP6x - FET525 L Remote Transmitter Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular housing identified as Field Housing or Type 4. This is common for all versions of the electronics housing discussed in this Page 4 of 7

Attachment to GB/FME/ExTR08.006/09 report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm stand-off between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. This is identified by option p HART FEP315 / HART FEP515 / HART FET325 Operating Value FEH315 /FEH515 / FET325 U N [V] I N [ma] Current Output 1 31/32 30 30 active/ passive Digital Output DO2 41/42 30 220 passive Digital Output DO1 51/52 30 220 active/ passive Digital Input* 81/82 30 10 passive * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 5 of 7

Attachment to GB/FME/ExTR08.006/09 FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 6 of 7

Attachment to GB/FME/ExTR08.006/09 FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

Attachment to GB/FME/ExTR08.006/10 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FET3** Transmitter FET5** Transmitter FEP315abcdefghijk0mnopqrstu ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrstu ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U, D, T or W c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, B3, B6, B7, B8, B9, C1, C2, C3, C4, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, E7, or E8 g = Process connection material; B, C, or D h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits ; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1 or H2 FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, B3, B6, B7, B8, B9, C1, C2, C3, C4, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, E7, or E8 g = Process connection material; B, C, or D h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter Page 1 of 7

Attachment to GB/FME/ExTR08.006/10 l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrstu HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrstu HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single number m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1 or H2 FEH325abcdefghijk0Mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0Mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 n = Protection Class: 1, 2, 3, or 4 Page 2 of 7

Attachment to GB/FME/ExTR08.006/10 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqru Transmitter FET525jk0Mnopqru Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter n = Protection Class: 1 or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. u = Transmitter housing design; H1 or H2 FET325jklLnopqrH2 Transmitter FET525jklLnopqrH2 Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter l = Signal Cable length and type: 0, 1, or 2 n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. Marking Ex na nc IIC T* - FEP315 M /FEH315 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP315 M /FEH315 Integral Ex na nc nl IIC T*- FNICO field device - FEP315 M /FEH315 Integral Ex na nc IIC T* - FEP515 M /FEH515 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP515 M /FEH515 Integral Ex na nc nl IIC T*- FNICO field device - FEP515 M /FEH315 Integral Ex d e ia ma IIC T* - FEH315 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device - FEH315 L Integral DN3 DN100 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia ma IIC T* - FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device - FEH515 L Integral DN3 DN100 [Ex ia] IIC - FISCO field device - FEP515 L /FEH515 Integral Ex d e ia ma IIC T* - FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP315 L Integral DN3-300 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FEP515 L Integral DN3-300 Page 3 of 7

Attachment to GB/FME/ExTR08.006/10 Ex d e ia ma IIC T*- FISCO field device - FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* - FEP515 L Integral DN3-300 Ex d e ia IIC T* - FEP315 L Integral - DN350-2000 Ex iad td A21 IP6x T* - FEP315 L Integral - DN350-2000 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral - DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia IIC T* - FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* - FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* - FEP515 L Integral DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral - Ex na IIC T* - FEP325 M /FEH325 Remote Ex na nl IIC T*- FNICO field device - FEP325 M /FEH325 Remote Ex td A21 IP6x T85 C...Tmedium - FEP325 M /FEH325 - Remote Ex na IIC T* - FEP525 M /FEH525 Remote Ex na nl IIC T*- FNICO field device - FEP525 M /FEH525 Remote Ex td A21 IP6x T85 C...Tmedium - FEP525 M /FEH525 - Remote Ex e ia ma IIC T* - FEP325 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN3-300 Ex td A21 IP6x T* - FEP325 L Remote - DN3-300 Ex e ia ma IIC T* - FEP525 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN3-300 Ex td A21 IP6x T* - FEP525 L Remote - DN3-300 Ex e ia IIC T* - FEP325 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN350 2000 Ex td A21 IP6x T* - FEP325 L Remote - DN350 2000 Ex e ia IIC T* - FEP525 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* - FEP525 L Remote - DN350-2000 Ex na nc IIC T4 - FET325 M Transmitter only Ex na nl IIC T*- FNICO field device - FET325 M Transmitter only Ex td A21 IP6x T70 C - FET325 M Transmitter only Ex na nc IIC T4 - FET525 M Transmitter only Ex na nl IIC T*- FNICO field device - FET525 M Transmitter only Ex td A21 IP6x T70 C - FET525 M Transmitter only Ex d e [ia] IIC T* - FET325 L Remote - Transmitter [Ex ia] IIC - FISCO field device - FET325 L Remote Transmitter Ex td [iad] A21 IP6x - FET325 L Remote Transmitter Ex d e [ia] IIC T* - FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device - FET525 L Remote - Transmitter Ex [ia] IIC T* - FET525 L Remote - Transmitter Ex td [iad] A21 IP6x - FET525 L Remote Transmitter Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular housing identified as Field Housing or Type 4. This is common for all versions of the electronics housing discussed in this Page 4 of 7

Attachment to GB/FME/ExTR08.006/10 report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm stand-off between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. This is identified by option p HART FEP315 / HART FEP515 / HART FET325 Operating Value FEH315 /FEH515 / FET325 U N [V] I N [ma] Current Output 1 31/32 30 30 active/ passive Digital Output DO2 41/42 30 220 passive Digital Output DO1 51/52 30 220 active/ passive Digital Input* 81/82 30 10 passive * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 5 of 7

Attachment to GB/FME/ExTR08.006/10 FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 6 of 7

Attachment to GB/FME/ExTR08.006/10 FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

Attachment to IECEx FME08.0004/11 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FET3** Transmitter FET5** Transmitter FEP315abcdefghijk0mnopqrstu ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqrstu ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U, D, T or W c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, B3, B6, B7, B8, B9, C1, C2, C3, C4, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, E7, or E8 g = Process connection material; B, C, or D h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits ; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1 or H2 FEP325abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Yrst ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U or D c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; D0, D1, D2, D3, D4, D5, D6, A1, A3, A6, A7, A8, A9, B3, B6, B7, B8, B9, C1, C2, C3, C4, J0, J1, J2, J3, E0, E1, E2, E3, E4, E5, E6, E7, or E8 g = Process connection material; B, C, or D h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter Page 1 of 7

Attachment to IECEx FME08.0004/11 l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FEH315abcdefghijklmnopqrstu HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrstu HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0. g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single number m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1 or H2 FEH325abcdefghijk0Mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0Mno0Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; D2, D4, D5, D6, A1, A3, J1, J2, J3, E0, M1, F1, R1, R2, R3, R4, R5, R6, T1, T2, T3, P1, W1 or Y0 g = Process connection material; C, D, E, F, G, H, W or Y h = Usage certifications; Any single number i = Calibration type; Any single letter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 n = Protection Class: 1, 2, 3, or 4 Page 2 of 7

Attachment to IECEx FME08.0004/11 o = Cable Conduits; A, B, or C r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqru Transmitter FET525jk0Mnopqru Transmitter a j = k = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 Name plate language and type; Any single letter n = Protection Class: 1 or 4 b o = p = Cable Conduits; A, B, or C Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F c r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. u = Transmitter housing design; H1 or H2 d = FET325jklLnopqrH2 Transmitter FET525jklLnopqrH2 Transmitter e = a j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; Any single letter f l = Signal Cable length and type: 0, 1, or 2 b n = Protection Class: 1, or 4 o = Cable Conduits; A, B, or C p g = Power supply; 1, 2, 3, or 4 c q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. h = d = Marking i = e Ex = na nc IIC T* - FEP315 M /FEH315 - Integral Ex td A21 IP6x T70 C...Tmedium - FEP315 M /FEH315 Integral Ex na nc nl IIC T*- FNICO field device - FEP315 M /FEH315 Integral Ex na nc IIC T* - FEP515 M /FEH515 - Integral f = Ex td A21 IP6x T70 C...Tmedium - FEP515 M /FEH515 Integral Ex na nc nl IIC T*- FNICO field device - FEP515 M /FEH315 Integral Ex d e ia ma IIC T* - FEH315 L Integral DN3 DN100 g = Ex iad td A21 IP6x T* - FEH315 L Integral DN3 DN100 Ex td iad A21 IP6x T* -FISCO field device - FEH315 L Integral DN3 DN100 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex h = d e ia ma IIC T* - FEH515 L Integral DN3 DN100 Ex iad td A21 IP6x T* - FEH515 L Integral DN3 DN100 Ex td iad A21 IP6x T* - FISCO field device - FEH515 L Integral DN3 DN100 [Ex i = ia] IIC - FISCO field device - FEP515 L /FEH515 Integral Ex d e ia ma IIC T* - FEP315 L Integral DN3-300 Ex d e ia ma IIC T*- FISCO field device - FEP315 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP315 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP315 L Integral DN3-300 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FEP515 L Integral DN3-300 Page 3 of 7

Attachment to IECEx FME08.0004/11 Ex d e ia ma IIC T*- FISCO field device - FEP515 L Integral DN3-300 [Ex ia] IIC - FISCO field device - FEP515 L Integral DN3-300 Ex iad td A21 IP6x T* - FEP515 L Integral DN3-300 Ex td [iad] A21 IP6x T* - FEP515 L Integral DN3-300 Ex d e ia IIC T* - FEP315 L Integral - DN350-2000 Ex iad td A21 IP6x T* - FEP315 L Integral - DN350-2000 Ex td iad A21 IP6x T* -FISCO field device - FEP315 L Integral - DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral Ex d e ia IIC T* - FEP515 L Integral DN350-2000 Ex iad td A21 IP6x T* - FEP515 L Integral DN350-2000 Ex td iad A21 IP6x T* - FEP515 L Integral DN350-2000 [Ex ia] IIC T*- FISCO field device - FEP315 L /FEH315 Integral - Ex na IIC T* - FEP325 M /FEH325 Remote Ex na nl IIC T*- FNICO field device - FEP325 M /FEH325 Remote Ex td A21 IP6x T85 C...Tmedium - FEP325 M /FEH325 - Remote Ex na IIC T* - FEP525 M /FEH525 Remote Ex na nl IIC T*- FNICO field device - FEP525 M /FEH525 Remote Ex td A21 IP6x T85 C...Tmedium - FEP525 M /FEH525 - Remote Ex e ia ma IIC T* - FEP325 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN3-300 Ex td A21 IP6x T* - FEP325 L Remote - DN3-300 Ex e ia ma IIC T* - FEP525 L Remote - DN3-300 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN3-300 Ex td A21 IP6x T* - FEP525 L Remote - DN3-300 Ex e ia IIC T* - FEP325 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP325 L Remote - DN350 2000 Ex td A21 IP6x T* - FEP325 L Remote - DN350 2000 Ex e ia IIC T* - FEP525 L Remote - DN350 2000 [Ex ia] IIC - FISCO field device - FEP525 L Remote - DN350-2000 Ex td A21 IP6x T* - FEP525 L Remote - DN350-2000 Ex na nc IIC T4 - FET325 M Transmitter only Ex na nl IIC T*- FNICO field device - FET325 M Transmitter only Ex td A21 IP6x T70 C - FET325 M Transmitter only Ex na nc IIC T4 - FET525 M Transmitter only Ex na nl IIC T*- FNICO field device - FET525 M Transmitter only Ex td A21 IP6x T70 C - FET525 M Transmitter only Ex d e [ia] IIC T* - FET325 L Remote - Transmitter [Ex ia] IIC - FISCO field device - FET325 L Remote Transmitter Ex td [iad] A21 IP6x - FET325 L Remote Transmitter Ex d e [ia] IIC T* - FET525 L Remote Transmitter [Ex ia] IIC - FISCO field device - FET525 L Remote - Transmitter Ex [ia] IIC T* - FET525 L Remote - Transmitter Ex td [iad] A21 IP6x - FET525 L Remote Transmitter Ta = -40 C to +60 C *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 or a rectangular housing identified as Field Housing or Type 4. This is common for all versions of the electronics housing discussed in this Page 4 of 7

Attachment to IECEx FME08.0004/11 report. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm stand-off between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. This is identified by option p HART FEP315 / HART FEP515 / HART FET325 Operating Value FEH315 /FEH515 / FET325 U N [V] I N [ma] Current Output 1 31/32 30 30 active/ passive Digital Output DO2 41/42 30 220 passive Digital Output DO1 51/52 30 220 active/ passive Digital Input* 81/82 30 10 passive * Not available when Current Output 1 = Active FEP_15...(M.P) FEH_15...(M,P) FET_25...(M,P) PA/FF communication Fieldbus 97/98 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 5 of 7

Attachment to IECEx FME08.0004/11 FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS U O I O P O C O C OPA L O [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 17.5 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 The electrical parameters are (using barriers with resistive outputs): FEP_15...(L,R) FEH_15...(L,R) FET_25...(L,R) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500 2000 3.6 3.6 0.17 Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 6 of 7

Attachment to IECEx FME08.0004/11 FEP315/FEP515 FEH315/FEH515 FET325/FET525 HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Page 7 of 7

Attachment to IECEx FME08.0004/12 Electrical Apparatus FEP3** ProcessMaster Electromagnetic Flowmeter FEP5** ProcessMaster Electromagnetic Flowmeter FEH3** HygienicMaster Electromagnetic Flowmeter FEH5** HygienicMaster Electromagnetic Flowmeter FET3** Transmitter FET5** Transmitter FEP315abcdefghijk0mnopqr.AY.t.u.w ProcessMaster Electromagnetic Flowmeter Integral version FEP515abcdefghijk0mnopqr.AY.t.u.w ProcessMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U, D, T or W c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; Up to PN100/CI600 or equivalent pressure rating any two characters or A7, A8, A9, H7, H8 or H9 g = Process connection material; any single character h = Usage certifications; any single character i = Calibration type; any single character j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; any single character m = Explosion Protection Certification; L or M n = Protection Class: 1 or 4 o = Cable Conduits ; A, or B p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1, H2 or H4 w = Sensor Housing Material; SMA or SMS FEP325abcdefghijklmno0Y.r.s.t.v.w ProcessMaster Electromagnetic Flowmeter Remote version FEP525abcdefghijklmno0Y.r.s.t.v.w ProcessMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 760, 800, 900, 001, 051, 101, 201, 401, 505, 601, 801, or 002. b = liner material: A, E, F, H, M, P, S, U, D, T or W c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, 2, 3, or 4. f = Process connection type; Up to PN100/CI600 or equivalent pressure rating any two characters or A7, A8, A9, H7, H8 or H9 g = Process connection material; any single character Page 1 of 7

Attachment to IECEx FME08.0004/12 h = Usage certifications; any single character i = Calibration type; any single character j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; any single character l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 m = Explosion Protection Certification; L or M n = Protection Class: 1, 2, 3 or 4 o = Cable Conduits; A, or B r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1, H2 or H4 w = Sensor Housing Material; SMA or SMS FEH315abcdefghijklmnopqrAY.t.u.w HygenicMaster Electromagnetic Flowmeter Integral version FEH515abcdefghijklmnopqrAY.t.u.w HygenicMaster Electromagnetic Flowmeter Integral version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100 b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 f = Process connection type; Up to PN100/CI600 or equivalent pressure rating any two characters or A7, A8, A9, H7, H8 or H9 g = Process connection material; any single character h = Usage certifications; any single character i = Calibration type; An any single character j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; any single character m = Explosion Protection Certification; L, or M n = Protection Class: 1, or 4 o = Cable Conduits; A, or B p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 1, 2, 3, or 4. s = Accessories: AY or blank t = Laid length; J1, J3, JA, JC or JN u = Transmitter housing design; H1, H2 or H4 w = Sensor Housing Material; SMA or SMS FEH325abcdefghijk0Mno1Yrst HygenicMaster Electromagnetic Flowmeter Remote version FEH525abcdefghijk0Mno1Yrst HygenicMaster Electromagnetic Flowmeter Remote version a = 3 digit number representing the bore diameter; 003, 004, 006, 008, 010, 015, 020, 025, 032, 040, 050, 065, 080, or 100. b = liner material: A, P, or T c = Electrode design; 1, 2, 5, or 6. d = Measuring electrode material; A, C, D, E, F, G, H, J, K, N, R, S, T, or W e = Grounding accessories; 1, or 2 Page 2 of 7

a = b = c = d = e = f = g = h = i = a = b = c = d = e = f = g = h = i = Attachment to IECEx FME08.0004/12 f = Process connection type; Up to PN100/CI600 or equivalent pressure rating any two characters or A7, A8, A9, H7, H8 or H9 g = Process connection material; any single character h = Usage certifications; any single character i = Calibration type; any single character j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; any single character l = Signal Cable length and type: 0, 1, 2, 3, 4, 5, 6, 7 and 8 n = Protection Class: 1, 2, 3, or 4 o = Cable Conduits; A, or B r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. s = Accessories: AY or AP t = Laid length; J1, J3, JA, JC or JN FET325jk0Mnopqru Transmitter FET525jk0Mnopqru Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; any single character n = Protection Class: 1 or 4 o = Cable Conduits; A, or B p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. u = Transmitter housing design; H1, H2 or H4 FET325jklLnopqru Transmitter FET525jklLnopqru Transmitter j = Temperature range of sensor/ambient temperature range; 1, 2, 3, or 4 k = Name plate language and type; any single character l = Signal Cable length and type: 0, 1, or 2 n = Protection Class: 1, or 4 o = Cable Conduits; A, or B p = Power supply; 1, 2, 3, or 4 q = Input and output signal type; A, B, C, D, E, or F r = Configuration type/diagnostics; 0, 1, 2, 3, or 4. u = Transmitter housing design; H2 or H4 Marking Ex na nc mc IIC T* - FEP315 M /FEH315 M - Integral Ex tb IIIC T70 C...Tmedium - FEP315 M /FEH315 M Integral Ex na nc ic mc IIC T*- FISCO field device - FEP315 M /FEH315 M Integral Ex na nc mc IIC T* - FEP515 M /FEH515 M - Integral Ex tb IIIC T70 C...Tmedium - FEP515 M /FEH515 M Integral Ex na nc ic mc IIC T*- FISCO field device - FEP515 M /FEH315 M Integral Ex d e ia ma IIC T* - FEH315 L Integral DN3 DN100 Ex ia tb IIIC T* - FEH315 L Integral DN3 DN100 Ex ia tb IIIC T* - FISCO field device - FEH315 L Integral DN3 DN100 Ex d e ia ma IIC T* - FEH515 L Integral DN3 DN100 Ex ia tb IIIC T* - FEH515 L Integral DN3 DN100 Page 3 of 7

Attachment to IECEx FME08.0004/12 Ex ia tb IIIC T* - FISCO field device - FEH515 L Integral DN3 DN100 Ex d e ia ma IIC T* - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FISCO field device - FEP315 L Integral DN3-300 Ex ia tb IIIC T* - FEP315 L Integral DN3-300 Ex ia tb IIIC T* - FISCO field device - FEP315 L Integral DN3-300 Ex d e ia ma IIC T* - FEP515 L Integral DN3-300 Ex d e ia ma IIC T* - FISCO field device - FEP515 L Integral DN3-300 Ex ia tb IIIC T* - FEP515 L Integral DN3-300 Ex tb ia IIIC T* - FISCO field device - FEP515 L Integral DN3-300 Ex d e ia IIC T* - FEP315 L Integral - DN350-2000 Ex ia tb IIIC T* - FEP315 L Integral - DN350-2000 Ex ia tb IIIC T* - FISCO field device - FEP315 L Integral - DN350-2000 Ex d e ia IIC T* - FEP515 L Integral DN350-2000 Ex ia tb IIIC T* - FEP515 L Integral DN350-2000 Ex ia tb IIIC T* - FEP515 L Integral DN350-2000 Ex na IIC T* - FEP325 M /FEH325 Remote Ex na ic IIC T* - FISCO field device - FEP325 M /FEH325 Remote Ex tb IIIC T85 C...Tmedium - FEP325 M /FEH325 - Remote Ex na IIC T* - FEP525 M /FEH525 Remote Ex na ic IIC T* - FISCO field device - FEP525 M /FEH525 Remote Ex tb IIIC T85 C...Tmedium - FEP525 M /FEH525 - Remote Ex e ia ma IIC T* - FEP325 L Remote - DN3-300 Ex tb IIIC T* - FEP325 L Remote - DN3-300 Ex e ia ma IIC T* - FEP525 L Remote - DN3-300 Ex tb IIIC T* - FEP525 L Remote - DN3-300 Ex e ia IIC T* - FEP325 L Remote - DN350 2000 Ex tb IIIC T* - FEP325 L Remote - DN350 2000 Ex e ia IIC T* - FEP525 L Remote - DN350 2000 Ex tb IIIC T* - FEP525 L Remote - DN350-2000 Ex na nc mc IIC T4 - FET325 M Transmitter only Ex na ic IIC T* - FISCO field device - FET325 M Transmitter only Ex tb IIIC T70 C - FET325 M Transmitter only Ex na nc mc IIC T4 - FET525 M Transmitter only Ex na ic IIC T* - FISCO field device - FET525 M Transmitter only Ex tb IIIC T70 C - FET525 M Transmitter only Ex d e [ia] IIC T* - FET325 L Remote - Transmitter Ex tb [ia] IIIC T70 C - FET325 L Remote Transmitter Ex d e [ia] IIC T* - FET525 L Remote Transmitter Ex tb [ia Da] IIIC - FET525 L Remote Transmitter Ta = -40 C to +60 C when option u = H2; -20 C to +60 C when option u = H4; *See Operating Instructions IP65/67 Integral version/transmitter only version IP65/67/68 Remote sensor Equipment The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are a series of electromagnetic flowmeters. The electronics are housed within a flameproof cylindrical enclosure with increased safety terminal compartment identified as a Type 3 (aluminium alloy or stainless steel) or a rectangular housing identified as Field Housing or Type 4. This is common for all versions of the electronics housing discussed. The FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster are both available as compact (integral) and remote designs. A high process temperature version is available and uses a 100 mm stand-off between the Primary and the electronics or remote connection facilities. On the remote versions an increased safety junction box is used for Page 4 of 7

Attachment to IECEx FME08.0004/12 external connections. This junction box is manufactured from aluminium alloy (EN AC 44200) or stainless steel with a maximum magnesium content of 6%. The main circuitry for the flowmeters is contained within a black plastic cartridge. This is used in the FEP3**/FEP5** ProcessMaster, and FEH3**/FEH5** HygienicMaster and the FET325/FET525 Transmitter only versions. The backplane and connection facilities are different for each design. The cartridge contains the power supply board, the analogue/digital board and the display board. Electrical parameters Type n version Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. This is identified by option p FEP_15 (M) FEH_15 (M) FET_25 (M) Current Output 1 active/ passive Digital Output DO2 passive Digital Output DO1 active/ passive Digital Input* passive Operating Value U N [V] I N [ma] 31/32 30 30 41/42 30 220 51/52 30 220 81/82 30 10 FEP_15...(M) FEH_15...(M) FET_25...(M) PA/FF communication Fieldbus 41/42 Operating Value PA/FF communication U N [V] I N [ma] Pulse Output DO2 41/42 FNICO [V] [ma] [mw] [nf] [nf] [uh] 60 500 7000 1 1 5 30 220 Zone 1 version (Assembly with Current Output 1 active) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. FEP315/FEP515 FEH315/FEH515 Ex i / IS U O I O P O C O C OPA L O Page 5 of 7

Attachment to IECEx FME08.0004/12 FET325/FET525 HART communication [V] [ma] [mw] [nf] [nf] [mh] Current Output 1 Active 31/32 20 100 500 210 195 6 [V] [ma] [mw] [nf] [nf] [mh] 60 425* 2000* 8.4 24 0.065 Digital Output DO2 Digital Output DO1 Digital Input 41/42 51/52 [V] [ma] [mw] [nf] [nf] [nh] 60 425* 2000* 3.6 3.6 170 60 425* 2000* 3.6 3.6 170 - - - - - - - - - - - - - - - - - - 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using FISCO certified supplies): FEP_15...(L) FEH_15...(L) FET_25...(L) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 17 380 5320 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500* 2000* 3.6 3.6 0.17 * = dual or single channel intrinsically safe barrier with resistive outputs The electrical parameters are (using barriers with resistive outputs): FEP_15...(L) FEH_15...(L) FET_25...(L) PA/FF communication Fieldbus Pulse Output DO2 97/98 41/42 Ex i / IS [V] [ma] [mw] [nf] [nf] [uh] 60 500 5000 1 1 5 [V] [ma] [mw] [nf] [nf] [uh] 60 500* 2000* 3.6 3.6 0.17 * = dual or single channel intrinsically safe barrier with resistive outputs Zone 1 version (Assembly with Current Output 1 passive) Power Supply (s L and N) 100... 230 V (-15/+10%) AC: 24 V (- 30/+10%) AC: 24 V (- 30/+30%) DC, Ripple: < 5 %. Page 6 of 7

Attachment to IECEx FME08.0004/12 FEP_15...(L) FEH_15...(L) FET_25...(L) HART communication Ex i / IS [V] [ma] [mw] [nf] [nf] [nh] Current Output 1 31/32 60 500* 2000* 8,4 24 170 Digital Output DO2 Digital Output DO1 Active/ Digital Input 41/42 51/52 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 60 500* 2000* 3,6 3,6 170 81/82 * = dual or single channel intrinsically safe barrier with resistive outputs Non intrinsically safe communications options. (Assembly with current output 1 active) Operating Rated Value Value U M I M U N I N FEP_15...(L) FEH_15...(L) FET_25...(L) HART communication Current Output 1 Active Digital Output DO2 Digital Output DO1 Active/ Digital Input 31/32 41/42 51/52 81/82 [V] [ma] [V] [ma] 60 35 30 30 60 35 30 220 60 35 30 220 - - - - - - - - - - - - Page 7 of 7