ND0356 School of Engineering Technology The Built Environment National Diploma in Construction Management (Level 6) Programme Handbook 2015
Disclaimer Wellington Institute of Technology (WelTec) exercises reasonable skill and care to ensure the information contained in this Programme Handbook is accurate at the time of publication. However, programmes and courses are subject to continuous processes of review and change and WelTec reserves the right to change the content, location or method of presentation of any programme or course to reflect changing circumstances including student demand and resource availability, and to update this Programme Handbook accordingly. The online edition of the Programme Handbook is the official Programme Handbook. WelTec accepts no responsibility or liability for errors or omissions that may be contained in this Programme Handbook, nor any consequences arising therefrom. Copyright 2015 WelTec owns copyright of this Programme Handbook. No part may be reproduced, stored in a retrieval system or offered for resale without WelTec s written permission. Contact WelTecHandbook@weltec.ac.nz for more information. Wellington Institute of Technology - 2015 Programme Handbook February 2015 ND0356 National Diploma in Construction Management (Level 6)
School of Engineering Technology PROGRAMME HANDBOOK 2015 ND0356 National Diploma in Construction Management (Level 6) Publication Date: 16 February 2015 Wellington Institute of Technology - 2015 Programme Handbook ND0356 National Diploma in Construction Management (Level 6)
HAERE MAI Whai korōria ki te atua i runga rawa Maunga rongo ki te whenua Whakaaro pai ki ngā Tangata Katoa. Tena Koutou Katoa, Tēnei te mihi atu ki a koutou ngā Tauira o Te Whare Wananga o Te Awakairangi. Nau mai haere mai ki tēnei Wananga o tātou. Kia kaha koutou ki te whai mātauranga i tēnei tau, ki te whakarongo hoki ki ō koutou kaiako. Whāia te kotahitanga o te wairua. Mā te rangimārie me te aroha e paihere (pursue unity of spirit, which is bound together by peace and aroha) He mihi nui tēnei kia koutou ngā Tauira o Te Whare Wananga o Te Awakairangi. Nau mai haere mai ki tēnei Whare Wananga o tātou. Overview and Programme Specific Information Page 4
CONTENTS HAERE MAI... 4 CHIEF EXECUTIVE S WELCOME... 7 EXECUTIVE DEAN S WELCOME... 8 INTRODUCTION... 8 TAIKURA... 9 OUR COMMITMENT TO LEARNING... 10 ACADEMIC CALENDAR - 2015... 11 STAFF... 13 AIMS... 13 GRADUATE PROFILE... 14 CAREERS... 14 STAIRCASING... 14 PROGRESS THROUGH THE PROGRAMME... 15 GRADUATION CRITERIA... 15 PRIZES... 16 LEARNING AND TEACHING... 17 ASSESSMENT PROCEDURES... 17 Academic Honesty and Assessment Integrity... 18 Assessment Rationale... 18 Assessment Schedule... 19 Format of Assessments... 19 Assessment Cover Sheets... 19 Submitting Assessments... 20 Turnitin... 20 Extension before the Course End Date... 20 Extension after the Course End Date... 20 Unarranged Late Submission... 21 Further Assessment Attempts... 21 Assessment Results Notification... 21 Challenging Assessment Decisions... 22 RISK MANAGEMENT, SAFETY AND HEALTH... 22 ATTENDANCE and PUNCTUALITY... 22 WITHDRAWAL... 23 REQUIRED TEXTS... 23 STATIONERY REQUIREMENTS... 24 OFF-SITE PRACTICAL AND WORKPLACE COMPONENTS... 24 INFORMED CONSENT AND CONFIDENTIALITY... 24 STUDENT SURVEYS... 24 STUDENT SUPPORT... 25 Getting Help... 25 Māori: Te Whare Āwhina... 25 Pasifika... 26 Student Counselling Service... 26 Disability... 26 Library Services... 26 Learning Support... 27 Overview and Programme Specific Information Page 5
Student Mentors... 27 WelTec Student Association (WSA) and Student Council... 27 COURSE DESCRIPTORS... 27 Overview and Programme Specific Information Page 6
WELCOME TO WELTEC CHIEF EXECUTIVE S WELCOME Talofa Lava, Kia Orana, ni sa Bula Vinaka, Namaste Kaise Hai, Sat sri akal, Malo e Lelei, Halo Olgeta, Taloha ni Marhaba, Bozu, Fakalofa Lahi Atu, Annyong haseyo, Ni hao Greetings, Kia Ora, Welcome to Wellington Institute of Technology Te Whare Wananga o te Awakairangi In selecting to learn at Wellington Institute of Technology (WelTec), you have chosen a place of learning that aims to give you not only the working lifestyle you want, but also, a friendly and comfortable environment where you can feel at home. By enrolling at WelTec, you are setting out on a learning journey. What you learn and for what purpose, are your decisions to make. We want to walk beside you as your coach, partner and mentor; offering support, facilities, opportunities, tools and information to help you reach your goals. When you enrol, you will find that the majority, or maybe all, of your courses take place on one campus. Whether your classes are held at our Wellington sites, in Auckland, any of our Petone or other sites, all are your campuses. With your Student ID card, all services and facilities are there for you to use. Please let us know if you have any queries or needs we haven t yet met. Best wishes for a happy and successful year. Linda Sissons (Dr) Chief Executive WelTec is proud to be Smokefree Overview and Programme Specific Information Page 7
EXECUTIVE DEAN S WELCOME Welcome to WelTec your place for learning. As an institute of learning you, as a student, are our key priority. All staff at WelTec have one primary focus and that is to help facilitate your learning in order to assist you to reach your goals. As you progress through your studies please take the opportunity to access the facilities and staff support available. Your success is our success. Julia Hennessy (MEd, MMgt, PGDipHSM, BA, DipN) Executive Dean INTRODUCTION This Programme Handbook provides information relating to the programme you are enrolled in with WelTec. There is also an associated WelTec A-Z that has other helpful information regarding systems and processes that operate at WelTec. The Official and most up-to-date version of this Programme Handbook is online at: http://www.weltec.ac.nz/sh/programme/nd0356.pdf These handbooks are revised from time-to-time. The latest version is online. The WelTec A-Z of general information is online at: http://moodle2.weltec.ac.nz/mod/page/view.php?id=8052 WelTec s policies that apply to students and this Programme Handbook are located at: http://www.weltec.ac.nz/sh/generic/policies.pdf If you find any errors, or have suggestions for improvements this Programme Handbook, please send your thoughts to the Programme Handbook team at: WelTecHandbook@weltec.ac.nz Overview and Programme Specific Information Page 8
TAIKURA During 2015, a new quality management system, named Taikura will be progressively implemented. Taikura: means the heart of the tree, symbolising a strong heart, which enables a tall, strong tree with good fruit thus good, strong policies leading to successful students. is the Quality Management System for institutions under the governance of the Council of WelTec and Whitireia Community Polytechnic. provides the foundation to guide the development and operation of the governance, academic and business policies, rules and procedures. Taikura identifies the following key policy principle areas: 1. Te Tiriti o Waitangi 2. The Learning Environment 3. Evaluation and Improvement 4. Quality Management The Academic Manual within the Quality Management System contains policies, regulations and procedures that affect students. Those most likely of interest to you as a student are: A1-R1 Academic Statute A3 Enrolment A4 Learning and Teaching A5 Student Support A6 Results and Awards The Academic Statute provides staff, students and applicants with the regulations that apply to the way programmes are run from enrolment to assessment, results and graduation. Policies which relate to students are available for your reference at: http://www.weltec.ac.nz/sh/generic/policies.pdf WelTec has two documents that help us provide the best learning environment possible: Student Code of Conduct Commitment to Learning The Student C ode of Conduct sets out the standards and principles for WelTec students in order to maintain an atmosphere and environment that encourages learning and effective partnerships by treating all people and the campus with respect and consideration. It specifies minimum standards and the consequences if these are not met. The Commitment to Learning sets out how we meet the principle that Learning is based on the concept of ako, a respectful reciprocal relationship that nurtures and sustains the learning relationship between WelTec and its students. As part of Taikura, the following Commitment to Learning document outlines the principles of commitment and engagement required between WelTec staff and students in order to achieve learning success. Overview and Programme Specific Information Page 9
OUR COMMITMENT TO LEARNING Overview and Programme Specific Information Page 10
TRIMESTER ONE - 2015 TRIMESTER TWO - 2015 ACADEMIC CALENDAR - 2015 Teachi ng Period Week No Monday date 5 26-Jan 6 2-Feb 7 9-Feb 8 16-Feb 9 23-Feb Mihi Whakatau; Orientation Petone 10 2-Mar Tri 1 Starts MON TUE WED THU FRI Orientation Maori Students Orientation Petone International Orientation Petone Waitangi Day Youth Guarantee 11 9-Mar Tri 1 12 16-Mar 13 23-Mar Full Year 14 30-Mar 15 6-Apr 16 13-Apr 17 20-Apr 18 27-Apr 19 4-May 20 11-May 21 18-May 22 25-May 23 1-Jun 24 8-Jun 25 15-Jun Easter Yr1 & 2 Study ANZAC Day Tri 1; Queen s Birthday Easter Wellington Graduation; Study Yr1 & 2 Study Yr1 & 2 Study Yr1 & 2 Study Yr1 & 2 Study Easter Yr1 & 2 Study Yr1 & 2 Study 26 22-Jun Tri 1 Ends 27 29-Jun 28 6-Jul Trimester Trimester 29 13-Jul Tri 2 Starts Trimester Trimester Trimester Trimester Trimester Trimester Trimester Tri 1 Results; Trimester 30 20-Jul Tri 2 31 27-Jul 32 3-Aug 33 10-Aug 34 17-Aug 35 24-Aug 36 31-Aug 37 7-Sep 38 14-Sep 39 21-Sep 40 28-Sep Full Year Yr1 & 2 Study 41 5-Oct Yr 2 Only Study 42 12-Oct Tri 2 43 19-Oct 44 26-Oct Labour Day Yr1 & 2 Study Yr 2 Only Study Yr1 &2 Study Yr 2 Only Study Yr1 &2 Study Yr 2 Only Study Yr1 &2 Study Yr1 &2 Study SAT- SUN Easter Overview and Programme Specific Information Page 11
2015 Teachi ng Period Week No Monday date MON TUE WED THU FRI 45 2-Nov Tri 2 Ends 46 9-Nov 47 16-Nov Tri 2 Results SAT- SUN Tri x Tri x Last date for refund on withdrawal or transfer in that Trimester enrolment period - 10 working days from course start for 17 week courses - 20 working days from course start for 32-34 week courses Last date to withdraw (75% of course enrolment period) The up-to-date, day-to-day and week-by-week timetables are located at: http://timetable.weltec.ac.nz/. Overview and Programme Specific Information Page 12
STAFF Executive Dean: School: Head of School: E-mail: Associate Head of School: Julia Hennessy Engineering Technology Graham Carson Graham.Carson@weltec.ac.nz Malcolm Fair Phone: 0-4-920 2547 E-mail: malcolm.fair@weltec.ac.nz The main person to approach for academic advice and guidance while you are enrolled is the programme s manager, Malcolm Fair. Staff Member Qualifications Position Email Address Campus, Location, Petone. 0800 WELTEC (935 832) Sean Irion BE SASM Sean.irion@weltec.ac.nz Vaughan Maybury BBSc, BArch(Hons), NCAET, TCCarp SASM Vaughan.maybury@weltec.ac.nz Richard Foreman PGDipAT ASM Richard.Foreman@weltec.ac.nz Gareth Shawcross BSc (Hons) Commercial Management and Quantity Surveying ASM Gareth.Shawcross@weltec.ac.nz Reo Tanaka MFA ASM Reo.Tanaka@weltec.ac.nz Position Abbreviations: ASM Academic Staff Member SASM Senior ASM PASM Principal ASM AIMS To provide skilled and competent construction managers at technician level who: Apply construction management theory to practice, and competently perform technical operations to the standards, ethical and professional responsibilities required by the construction management profession; Have a knowledge sufficient to permit informed, rational decision making in specialist field of construction management and to implement these decisions; Will work collaboratively with construction workers, clients, authorities, agencies, industry and other professionals to provide a comprehensive construction management service; and Have an understanding of all cultures and in particular an awareness and understanding of the tangata whenua and the implications of the Treaty of Waitangi and the Resource Management Act. Overview and Programme Specific Information Page 13
It is expected that graduates will attain the educational underpinnings and work ready attributes defined in the NZIOB Graduate profile for Construction Management Technicians. GRADUATE PROFILE On achievement of this qualification, graduates should: Be competent to apply a technical and conceptual knowledge to practical situations; Be confident, critical thinkers who have the ability to solve problems within a construction management setting; Have developed capabilities as effective communicators, with inquiring, flexible,, creative and critical attitudes towards contemporary issues and underlying theoretical concepts; Have an appreciation of management and information technology within the context of the qualification; Have an awareness of social, ethical and environmental issues; Have developed the necessary skills and strategies to work safely and effectively on and off construction sites and construction management workplaces and with individuals, contractors, communities, clients and authorities; Be self reliant and motivated for continuous learning and professional development; Function positively in a bi-cultural and multicultural environment such those which existing New Zealand Be work ready and able to be employed in a relevant construction management environment to work towards and meet the minimum standard of competence to practice competently to the standard expected of a reasonable construction manager. Students can progress onto the Bachelor of Construction Management. CAREERS The Diploma in Construction Management could lead to a career in Construction management for a student who also has practical experience in construction or it could lead to a career in Building Regulation, like building inspection, or facilities maintenance. It would also be useful to anyone interested in property development. STAIRCASING *HV4545 Certificate in Motor Body Trades (Level 3) (Collision Repair) or (Refinishing) Overview and Programme Specific Information Page 14
PROGRESS THROUGH THE PROGRAMME Schedule of Pre- and Co- Requisites: Course Number Course Title. Level Credits Pre (P) or -Co (C) Requisites BD5000 Building Science 5 15 BD5001 Residential Construction 5 15 BD5002 Residential Services 5 15 BD5003 Built Environment 5 15 BD5004 Measurement 1 5 15 BD5001 (C) BD5005 Building Law 5 15 BD5008 Tendering (B) 5 15 BD6006 Contract Administration (B) 6 15 BD4000 Cost Estimation 1 4 15 BD5004 (C) BD5006 Commercial Services 5 15 BD5002 (C) BD6001 Commercial Construction 6 30 BD5001 (P) BD6007 Quality Control and Safety 6 15 BD6001 (C) BD6008 Site Management 6 15 BD6001 (C) BD6009 Construction Methodology 6 15 BD6001 (C) BD6010 Programming (B) 6 15 BD6001 (C) BD6011 Contract Procurement 6 15 BD5008 (P) For full-time students it is a two year programme. GRADUATION CRITERIA Students must complete the requirements as shown below: Compulsory 14599 Produce a site specific safety plan and strategy for implementation on construction sites 9632 Demonstrate the process of bidding for a construction project 9633 Develop construction methodology for medium buildings 9635 Produce a site specific quality assurance plan for implementation on a construction project 9636 Develop construction planning for medium buildings 9637 Programme construction works for medium buildings 9639 Demonstrate knowledge of construction site procedures Overview and Programme Specific Information Page 15
9640 Demonstrate knowledge of principles and processes of construction site management 10925 Demonstrate knowledge of survey requirements for the setout of medium buildings 9658 Demonstrate knowledge of cost estimation processes for a building project 9659 Demonstrate knowledge of tendering processes for a building project 9661 Demonstrate knowledge of how to administer contracts and value building works 9663 Demonstrate knowledge of a feasibility study of a site 9664 Demonstrate knowledge of building law 9667 Apply principles from published data to the provision of services for small buildings 9668 Apply principles from published data to the provision of services for medium and large buildings 9669 Apply principles from published data to evaluate and select materials and finishes for buildings 9670 Identify environmental impacts, design, and construction techniques, on and of the built environment 9671 Determine and describe construction methods for small buildings 9672 Determine and describe construction methods for medium and large buildings 10039 Measure schedules of quantities for selected trade sections for quantity surveying 10042 Negotiate and apply specified types of contracts to tendering situations for quantity surveying Elective A minimum of 20 credits, at level 3 or above, is required from the subfield Communication Skills, of which a minimum of 10 credits is required from the domain writing See the National Certificate document for details found at http://www.nzqa.govt.nz/nqfdocs/quals/doc/0356.doc PRIZES Prizes may be given to students at the successful completion of the programme of study or identified milestone within a programme of study. Prizes recognise achievement and provide motivation to achieve high standards of academic work, application, diligence, leadership and/or team work. Prizes are presented to the prize winners at the main WelTec graduation ceremonies. Criteria for the prizes are available upon request from the programme manager, Malcolm Fair, or by visiting the prizes page on the WelTec website. Overview and Programme Specific Information Page 16
LEARNING AND TEACHING The delivery mode is face to face. Teaching and learning methods used will include: Lectures Introduce information and techniques to students that will give them tools by which they can make informed decisions. Academic staff members will formally present course material to students and will set the basis for further independent study. Students may be expected to read ahead and prepare for lecture topics. Tutorials Present actual work related cases and highlight areas for special attention that will expose them to on-site problems. They provide students the opportunity to work with or without assistance either individually or in groups. Case Studies Scenarios are presented and activities are undertaken that they will have to contribute to its possible resolution. Student Presentations Expose students to having to present information to groups as they will be required to present reports to individuals and groups. Assignments and Reports Students being able to undertake research and present information in a form that is acceptable to the industry. Field Visits Showing theory activities in action in real life situations. Group Activities Students, as a group, combined together to undertake an activity so they can arrive at a consensus. Visiting Speakers To provide students with the opportunity to hear firsthand about industry practices. ASSESSMENT PROCEDURES You need to become familiar with the assessment procedures for your courses and this programme. The overall programme procedures are given below. Course specific assessment procedures and requirements may also be noted in Course Outlines. Please note that all activities that contribute towards your final course grades, and therefore your qualification completion, are known as assessments (or more precisely summative assessments). Your tutors may use many different types of assessment activities in your courses. Overview and Programme Specific Information Page 17
Academic Honesty and Assessment Integrity The Academic Statute part 4 requires that you: make yourself available to undertake all summative assessment items at the time and place stipulated by the teaching staff responsible for the course act with integrity (honesty) during assessments. You are expected to: Submit material that is your own original work Collaborate only when permitted Acknowledge contributions from other sources by using the APA reference format (failure to do this correctly may be regarded as plagiarism) Keep written and electronic work secure to prevent others from accessing and copying work Understand the definition of academic dishonesty and the consequences of breaching the regulations (see A4-P8 Academic Dishonesty procedures). WelTec conducts assessments in the context of Taikura - Commitment to Learning, within rules set out in the following regulations and policies: A1-R1 The Academic Statute o Assessment o Aegrotat Circumstances o Challenging Assessment Decisions o Assessment Results and Course Grade o Academic Appeals o Supervised Assessment Regulations o Results and Grade Methods A4 Learning and Teaching A6 Results and Awards If you are approached by any person or website offering to assist you with essay writing or to complete assessments for you, please contact your tutor or send an email to the Associate Head of School as soon as possible. Do not agree to let other people do your work for you. Assessment provides the opportunity for you to receive feedback on your learning, and for tutors to track your progress. It is only through genuine learning and assessment that your qualification will have credibility and value. You may ask your tutors at any time about the quality-assured status of the assessment activities you are asked to complete. Assessment Rationale The courses in this programme are assessed using competency-based methods. Assessments will be against the learning outcomes and course aims as specified in the course outline and unit standards. Assessments may be in written, oral or practical exercise format including tests, essays, assignments and projects. They may be a closed or open book, or some combination of resources as specified by the course outline. 1. Assignment The form of the assignments will be specified in the programme handbook and course descriptor. May be any of the following: a. Practical exercise Overview and Programme Specific Information Page 18
b. Analysis / design with documentation c. Written description / evaluation / essay d. Investigation and written report 2. Test May be any of the following: a. An in-class written/practical test forming a small part of the overall assessment b. An oral exam 3. Presentation They can vary from informal classroom presentations to the much more formal delivery expected in project presentations; May be required for several reasons eg, a. To explain the results of a study b. To assess presentation skills 4. Project Usually defined in the discussion with the academic staff member and students are then expected to work under the supervision of the academic staff member, or nominated supervisor. Assessment Schedule Please refer to your Course Outline for the Assessment Schedule for each of your Courses. The Schedule will detail the assessment type (test, assignment, presentation, etc.), topic being assessed, due dates and weighting (if appropriate). Any other conditions will be noted as they apply to the assessments for that course. Format of Assessments Please check your Course Outline for a marking/assessment schedule to follow to assist you to meet the requirements of the assessment. If you require any further assistance contact your tutor and/or Learning Support tutors. Assessment Cover Sheets All paper-based assessment you submit either in person or by post, must have a completed Cover Sheet of which there are two versions: When it is your own submission http://www.weltec.ac.nz/sh/generic/sf020_assessment_cover_sheet-student.pdf When you are submitting as a member of a group (only one cover sheet required all need to sign) http://www.weltec.ac.nz/sh/generic/sf023_assessment_cover_sheet-group.pdf You need to complete all parts of the form, including the declaration, before submission. It is highly recommended that you follow this paper based submission process even if you are invited to make assessment submissions via email. If your course advises you to use the online Turnitin portal for assessment submission, then there is no need to submit a Cover Sheet. Please refer to your course outlines, and the section Submitting Assignments below for more information. Overview and Programme Specific Information Page 19
Submitting Assessments It is essential that you meet the assessment submission deadlines notified in your Course Outlines' assessment schedules - unless you have pre-arranged for an extension with your tutor. Some assessments may have time-related criteria attached. Your Course Outline informs you of these particular assessments, and the reasons for the time criteria. Lateness, absence or early departure from these assessments may carry specific penalties. To submit assessments in te reo Māori or New Zealand Sign Language you must advise the Associate Head of School within 10 working days of beginning the course. To receive special assistance to undertake an assessment, please call (04) 920 2476 or email ability@weltec.ac.nz for provision of this support. You will need to state the nature and type of assistance required. Turnitin See A1-R1 Academic Statute, part 4. As part of the promotion of a culture of academic scholarship and honesty at WelTec, some courses require all students to submit their assessments to Turnitin, an originality checking system. Turnitin compares your submitted assessment against a database of existing text from many sources, including the internet and submissions by other students. Turnitin then generates an originality report identifying any potentially unoriginal content. Information provided in the report may be used when an assessor wishes to verify the academic honesty and originality of the work you have submitted. Your submitted assessments, once analysed, also become part of the Turnitin database. If a course uses Turnitin, you will be provided with more information and instruction on its use. For courses that do not use Turnitin, you are still required to ensure your academic honesty. Any detected academic dishonesty is subject to being investigated following the procedures for Academic Dishonesty. Extension before the Course End Date To request the submission of an assessment after the notified due date, but before the end of the course (the course end date), you must submit Request for Extension Before Course End Date A4-F510, prior to the due date. You must state the reason (one of illness, injury or exceptional circumstances) for requesting the extension. You then submit the request form to your tutor, who may decline the request, or approve the request and negotiate a new submission date/time. Extension after the Course End Date See A1-R1 Academic Statute, part 4. To request the submission of an assessment after the notified due date and after the course end date, you must submit Request for Extension After Course End Date A4-F511, as soon as possible and not later than 48 hours before the assessment due date. You must state the reason (one of illness, injury or exceptional circumstances) for requesting the extension. Overview and Programme Specific Information Page 20
You then submit the request to the Associate Head of School, who may approve an extension for a period of no more than 10 working days after the course end date, where there are valid reasons. Where there are extenuating circumstances, the Associate Head of School may recommend an extension of more than 10 working days to the Board of Studies. Unarranged Late Submission See A1-R1 Academic Statute, part 4. Where work has been submitted late without an approved extension, your initial assessment attempt is deemed to have occurred. Further Assessment Attempts See A1-R1 Academic Statute, part 4. Further assessment attempts may be limited by the type of assessment or by the number of attempts permitted per assessment, course, level or programme. Further assessment attempts may involve either: Improving a previous submission, where the tutor considers that, with suggestions for improvement but no further learning time, you are likely to achieve a pass result. Submitting a new, similar but not identical assessment, where the tutor considers that you require further learning time. The new assessment covers the entire scope of the original, not merely those parts you did not complete successfully in the previous submission. Within five (5) working days of the release of the assessment result, you may make a request to the Associate Head of School for a further assessment opportunity. Each further attempt may require the payment of a fee plus costs involved in the provision of materials for the attempt. A further attempt is recorded for internal purposes and does not show on any official academic notification. On successfully completing a further assessment, the minimum pass result is awarded. Assessment Results Notification See A1-R1 Academic Statute, part 4. Course assessment and final grades are reported using the Grade Key 1 method. Grade Keys are explained in Schedule 2 of the Academic Statute. Once your tutor has marked your assessments you will be notified of your result. When the assessment is in the form of a practical in-class demonstration/observation, you are likely to receive your results immediately or soon after the assessment activity has concluded. When the assessment is a supervised test you are able to review your work, but the assessment is collected and retained by WelTec. When you submit an assessment it is returned to you along with feedback to explain the reason(s) for the assessment result. Results for each assessment are available within 15 working days on WelTec's Student Results portal at: https://results.weltec.ac.nz. Overview and Programme Specific Information Page 21
Final course grades are available within 25 working days from the course end date. Grades are viewable through the WelTec's Student Results portal at: https://results.weltec.ac.nz. Use your WelTec login and password to access a number of items, such as your assessment results, current course enrolments, and other details. Challenging Assessment Decisions See A1-R1 Academic Statute, parts 4, 7. You are encouraged to discuss any concerns about an assessment result with the tutor in the first instance. If you find a mistake in the counting or addition of marks, you may request a recount from the tutor within five (5) working days of the assessment results being released. If you consider that your assessment has not been marked according to the assessment criteria, you may challenge the result in writing to the Associate Head of School within five (5) working days of the assessment results being released. The Associate Head of School may arrange for your submitted assessment to be re-evaluated by another assessor, who may be independent of the programme. The outcome of the re-evaluation is your final result. You will normally be advised of the final result within ten (10) working days of receipt of the request, or within five (5) working days of receipt of any independent assessor s report, whichever is later. See A1-R1 Academic Statute, part 6. You may appeal an academic decision only after available procedures and steps within the Faculty/School, including those in Challenging an Assessment Result above, are exhausted. You may appeal against a final course grade on the following grounds: a. Additional information has become available since the approval of the course grade by the relevant body and/or b. There is evidence of procedural irregularities in the assessment process. Applications for appeal must be received in writing by the Chair of the Appeal Committee within five (5) working days of the release of final course grades. In exceptional circumstances the institution may extend the time for receipt of the application for appeal. See A1-R1 Academic Statute, part 8.. RISK MANAGEMENT, SAFETY AND HEALTH WelTec students share the responsibility of maintaining a safe and healthy working environment whether on campus or studying off-site (See A3-R2, Student Code of Conduct, Section 3.4). ATTENDANCE and PUNCTUALITY All daytime classes will have a common start time on the hour and must finish by 50 minutes past the hour, to allow time for students and staff to arrive at their next class on time. Overview and Programme Specific Information Page 22
An objective of study with WelTec is to prepare you for your career in industry. Your attitude, attendance and behaviour are important. Please give your best effort and ensure your behaviour and attendance reflect your desire to achieve. You should therefore arrive on time, fully equipped and, if applicable, dressed and groomed appropriately for practical sessions. You are expected to attend all classes and assessments as timetabled. If you are not able to attend then you should notify your course tutor. Daytime classes start on the hour and finish by 50 minutes past the hour, to allow time for students and staff to arrive on time at their next class. Note that students on student allowances/living costs who do not: meet prescribed attendance requirements, and/or disengages in their learning and assessments, and does not respond to contact from the institute, are reported to Academic Records and Administration. It is your responsibility to inform StudyLink if you change your study details. WITHDRAWAL If you accept your Offer of Place and then decide not to attend the programme, you must withdraw in writing, otherwise fees will be charged to you, whether or not you have attended classes. If you start to attend classes the last date for a refund on withdrawal or transfer is: 10 working days from course start for 17 week courses 20 working days from course start for 32-34 week courses If you withdraw from your programme within the time period specified above you will have no academic record for that enrolment, and any results achieved are not reported to external organisations. If you formally withdraw before 75% of the course has elapsed, your academic record will show the grade WD (withdrawn) for the course. If you cease to engage after 75% of the course has elapsed your academic record will show an appropriate grade, which may be a fail grade. See A1-R1 Academic Statute, part 2. REQUIRED TEXTS BD5000 Building Science BD5001 Residential construction Allen, E., & Iano, J. (2009). Fundamentals of building construction: materials and methods (5th ed.). Hoboken, NJ: Wiley. 9780470074688 BD5000 Building Science BD5001 Residential Construction BD5001 Residential Construction Overview and Programme Specific Information Page 23
BD5002 Residential Services BD5003 Built Environment BD6013 Preliminary Design Pringle, T., & Bennett, M. (2011). House building guide (3rd ed.). Porirua, New Zealand: BRANZ. 9781877330711 BD5003 Built Environment BD6001 Commercial Construction BD6005 Programming A BD6009 Construction Allen, E., & Iano, J. (2009). Fundamentals of building construction: materials and methods (5th ed.). Hoboken, NJ: Wiley. 9780470074688 BD5006 Commercial Services Bulleyment, A. (2004). Plumbing & drainage guide (2nd ed). Porirua, New Zealand: BRANZ. 1877330124 STATIONERY REQUIREMENTS You provide you own stationery items for your studies. Tutors will tell you if other equipment and/or materials are required for specific courses or classes. OFF-SITE PRACTICAL AND WORKPLACE COMPONENTS There are no off-site practical/workbased components in the programme. However you are expected to visit construction sites and document the construction process photographically for use in reports. It should also be stressed that practical knowledge of sites is very valuable and interaction with working sites is encouraged as much as possible. INFORMED CONSENT AND CONFIDENTIALITY You will be asked to complete a consent form if WelTec wishes to use a photograph of you in any publications. Personal information collected and stored by WelTec is kept confidential. STUDENT SURVEYS WelTec is interested in the experience students have during their time studying. As well as informal conversations with students, there are three main surveys available to students to express their views and rate WelTec services. As a student new to WelTec: In the first few weeks you will be invited to participate in the WelTec EV1 - First Impressions Survey (www.surveymonkey.com/s/weltecev1). This is open to first-time WelTec students, and asks for your rating of and views about your enrolment experience, the initial in-class experience, and also your experience of the online resources on Moodle. Overview and Programme Specific Information Page 24
During your course time: Your course outline may indicate that your course will have an EV4 - Tutor and Course Survey (http://www.thechoiceprotocol.ac.nz/ev4) undertaken towards the end. This helps the Programme Team to improve the teaching, the course, and the value of the programme to students. Note: you will need a specific 'survey event code' supplied by the survey administrator to use the EV4 (you can t do it otherwise). At the end of the programme or year: In the final few weeks of the programme, or year, you will be invited to participate in the EV3 - Student Satisfaction Survey (www.surveymonkey.com/s/weltecev3). This asks you about your overall experience of WelTec's services, the programme, teaching, skills development, career enhancement, and overall satisfaction. All WelTec surveys are anonymous; we do not ask you for identification. We do however ask for some demographic information (age range, sex, enrolment types, ethnicity, etc.) in order to make sense of trends for particular student groups. The outcomes of the surveys are reported as aggregated information and tables to the WelTec Academic Committee. The reports are also made available to students. STUDENT SUPPORT As a WelTec student, there are supports available to you as below. Getting Help The staff of the WelTec Learning Commons are your first point of contact for information and help while at WelTec, with: IT or log on issues Assistance with accessing and using online learning Where to find places and people on campus Help for distance students Help to access and use WelTec services and resources Making appointments for support staff We are available on every campus and online as well. The Learning Commons is where you can access drop-in computers, library resources, meeting and study rooms and all the help you might need. Contact the team on 0800 WelTec (935 832), email learningcommons@weltec.ac.nz or check out www.weltec.ac.nz/studentsupport Māori: Te Whare Āwhina Support to assist Māori students achieve successfully at WelTec is available from the Tamaiti Whangai team who are located in Te Whare Awhina, Kensington Ave, Petone. Te Whare Āwhina supports the participation and success of Maori students at WelTec. Concepts of Manaakitanga and Āwhina guide the centre. Services and support are wide and varied, and include mentoring support, advocacy, assistance with enrolment information, scholarship information, pathway planning including employment options, cultural and pastoral support. Please check us out at www.weltec.ac.nz/maori Overview and Programme Specific Information Page 25
Please contact us at 28 Kensington Avenue, Petone Campus, on (04) 9292509 or 0800 WelTec (935832), or email: maoristudentsupport@weltec.ac.nz Pasifika We want to ensure your success as a Pasifika student at WelTec, so we provide great staff, support services and resources. Students at the Petone campus are able to call in to the Pasifika Centre to get support and connect with other Pasifika students. If you are on another campus, Pasifika staff will be there regularly or contact them for a time to meet, or make contact online. Support includes mentoring, advocacy, assistance with enrolment information, scholarship information, pathway planning including employment options, and cultural and pastoral support. Please check us out at www.weltec.ac.nz/pasifika, visit us in the Pasifika Centre, Student Hub, Ground Floor Tower Block, Petone or contact us on 0800 WelTec (935 832), email: learningcommons@weltec.ac.nz Student Counselling Service If you have any issues with your personal well-being, WelTec (in collaboration with Vitae) provides all students with access to individual counselling services and trauma support. Vitae has a team of independent counsellors and psychologists, who are based throughout New Zealand. The counselling service is completely confidential and all students are entitled to three free counselling sessions. For identification purposes only, you will need to provide your WelTec Student ID number and the name of the programme in which you are enrolled. This service is available 24 hours, 7 days a week through Vitae. All services are provided in professional rooms off campus and are available to students from all WelTec Campuses. Contact Vitae on free phone 0508 664 981 or go to www.weltec.ac.nz/counselling and fill out the online self-referral form. Disability WelTec is committed to inclusive education and eliminating barriers for people with disabilities. If you are enrolled at WelTec and have an illness, a disability or a learning difficulty then we encourage you to contact our Ability Resource Service before you start your study. WelTec have a dedicated and supportive team of people who will help to ensure that your specific needs are addressed by helping you set up your individual learning plan and any other resources you may need. You can meet us in the Learning Commons, Level 2, Tower Block Petone, contact the team on 0800 WelTec (935 832) or email learningcommons@weltec.ac.nz Library Services Library Services are available at all of our campuses with access to print, online material, and help with finding the resources required to support your study. The Learning Commons Librarians are here to assist you with your study needs by guiding you to a wide range of relevant books, journals, videos and online resources. Overview and Programme Specific Information Page 26
They will assist you to research information on your chosen subjects and to reference your material correctly using the APA referencing format. Call in and chat with the Library staff at your campus Learning Commons with any questions you may have. Contact the team on 0800 WelTec (935 832), email learningcommons@weltec.ac.nz or check out www.weltec.ac.nz/studentsupport Learning Support Learning Advisors are here to offer you a wide range of educational support such as report or essay writing, literacy and numeracy, maths and other academic skills to help in your learning journey. We can provide advice, support and friendly assistance to help make your study at WelTec successful. It's easy to book an appointment with a Learning Advisor, just call in and chat with the team at the Learning Commons, or contact them by phone or email. Contact the team on 0800 WelTec (935 832), email learningcommons@weltec.ac.nz or visit www.weltec.ac.nz/studentsupport Student Mentors Life is full of challenges that can get in the way of your study. When those challenges occur, either with life or study, our Student Mentors are here to help you. Their job is to help you eliminate those barriers that impact on your attendance or success Your Student Mentor will come to you - just contact the Learning Commons team to make an appointment or drop into one of the Learning Commons. Contact the Student Mentor team on 0800 WelTec (935 832), email learningcommons@weltec.ac.nz WelTec Student Association (WSA) and Student Council WSA provide student activities, a chance for students to be involved and have a voice in institutional affairs and assists in providing independent student advocacy service to all students. You can meet WSA in the Student Hub, Ground Floor Tower Block, Petone, contact them on (04) 9202521 or 0800 WelTec (935 832) on Facebook, or email weltecsa@weltec.ac.nz COURSE DESCRIPTORS Course Descriptors are the formally approved documents that describe: The course title, level, credit value The aims of the course What you will be learning the Learning Outcomes that guide the content and process of your learning experiences and activities with your tutor The assessment activities you need to complete to show how well you have developed your skills and knowledge against the requirements of the Learning Outcomes Overview and Programme Specific Information Page 27
The texts or resources that you are required to purchase. Note: for some courses the latest texts may be listed either in the Required Texts section above, or in your Course Outline. If you are not certain, clarify the text or edition with your tutor. Any external standards that the course is also meeting the requirements of (may be unit standards, professional bodies, vendor certifications, etc.) Course Outlines, which your tutors will provide to you in class, or through Moodle, contextualise the Descriptors for your particular class for this year. Within the first week of starting a course, you should receive a written course outline containing at a minimum the timetable and assessment requirements. It may also contain tutor information, course topic details, rules, requirements and expectations specific to the course, and other useful information. See A1-R1 Academic Statute, part 3. The course descriptors for this programme are found in the Programme Handbook page of Moodle where this Handbook was located; you can open the course descriptors here. Note: Please be aware that not all courses listed in the course descriptors are offered in any given trimester or year. For further information please contact your Student Advisor. Overview and Programme Specific Information Page 28