Computer Aided Design 3. CAD Input Devices Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü
Hardware of a CAD System 3. CAD Input Devices Computer System Mainframe Computer and Graphics Terminals Powerful Inconvenient High cost Turn key CAD System Dedicated computer systems for CAD applications, consisting of a supermini computer and several design work stations. Following the "central control concept" Inconvenient and not powerful enough for complex 3D modeling. Workstations & High End Personal Computers Supporting multiple tasks Supporting network and file sharing convenient Low costs Present and trend 2
Hardware of a CAD System 3. CAD Input Devices Input/Output Devices Graphical Input Graphical Output Computer (CAD Workstation, Computer Terminal, Micro computer) Alpha Numeric Input Alpha Numeric Output 3
Input Devices 3. CAD Input Devices Keyboard Tablet/digitizer Mouse Trackball Light pen Touchpad Touchscreen Kontrol dialsorknobs Function switches Joystick Voice input 3D Data Acquisition Systems 4
Conventional keyboards are text only devices. Keyboards are the essential and basic input devices for all computer applications. They are typically employed to create & edit programs or to perform word processing functions. A typical keyboard is shown in the above figure. It is divided into four different areas The first area " (A) "is for normal typewriting when entering text strings. The second one " (B) "is the function key area for simplified handling of common operations. The third area " (C) " is composed by seperate cursor and control keys. This area presents several different configurations depending on the supplier of the keyboard, including arrows, thumbwheels etc The fourth area " (D) " is the numeric keyboard for fast numerical digit input. Working principals of keyboards are simple. A keyboard has typically two registers whose contents can be read by the computer, one to set a status bit when a key has been struck the other to identify the key by its character code.the value of the status bit is monitored in a continuous repetitive manner. When the user hits a key, the status bit is set and application program is consequently interrupted to clear the status bit, followed by reading the corresponding code of the key character. The loop is repeated every time the user strikes a key. 5
Tablet is a computer input device that allows one to hand draw images and graphics, similar to the way one draws images with a pencil and paper. These tablets may also be used to capture data or handwritten signatures. It can also be used to trace an image from a piece of paper which is taped or otherwise secured to the surface. Capturing data in this way, either by tracing or entering the corners of linear poly lines or shapes is called digitizing. A graphics tablet (also called pen pad or digitizer) consists of a flat surface upon which the user may "draw" or trace an image using an attached stylus, a pen like drawing apparatus. The image generally does not appear on the tablet itself but, rather, is displayed on the computer monitor. Some tablets however, come as a functioning secondary computer screen that you can interact with directly using the stylus. Some tablets are intended as a general replacement for a mouse as the primary pointing and navigation device for desktop computers. 6
7
Tablet types: Some of them use magnetic field to determine x,y coordinates. Some of them use strain wave. Acoustic tablets use acoustic methods. Microphones are placed in x,y,z axis. Pointer will point to the end of a certain frequency ranges. Microphones recieve this sound and x,y,z coordinates are determined according to recieving and formation time of sound. 2 and 3 D applications are avalibale. Acoustic 3D tablet 8
In computing, a mouse is a pointing device that functions bydetecting two dimensional motion relative to its supporting surface. Physically, a mouse consists of an object held under one of the user's hands, with one or more buttons. It sometimes features other elements, such as "wheels", which allow the user to perform various system dependent operations, or extra buttons or features that can add more control or dimensional input. The mouse's motion typically translates into the motion of a cursor on a display, which allows for fine control of a graphical user interface. First mousse of the world (1952) The first computer mouse, Douglas Engelbart, (1963) 9
Operating an opto-mechanical mouse: 1. moving the mouse turns the ball. 2. X and Y rollers grip the ball and transfer movement 3. Optical encoding disks include light holes. 4. Infrared LEDs shine through the disks. 5. Sensors gather light pulses to convert to X and Y vectors. 10
Cable Mouse In early times of computers mouse work by connecting to serial port. Recently this connection is adopted to PS/2 port. Today, most cable mouse connects to the USB port of a computer mouse. In addition, by means of various adapters, USB ports can be converted to PS / 2 or vice versa. Cordless Mouse Infrared mouse: This mouse uses an infrared communication with the computer. System is connected to computer s serial, PS/2 or USB port, and mouse connects to the system by means of infrared rays. If an object is present between the mouse and the system mouse movements won t be detected. Today this type of mouse is no longer available in the market. Radio wave mouse: Different from infrared mouse this mouse use radio wave signals for communication. Coverage areas is generally measured in tens of meters. Bluetooth mouse: This mouse use Bluetooth cordless technology for communication. Has advantages compared to above two types: Can be used wiyh every device as uses a standard protocol (PC, Apple and even Pocket PC) 11
Types according to motion detection methods: Mechanical mice Mechanical mice detects motion by means of a ball which can rotate by the mouse movement. This ball is coated by rubber and inside core is metal. As dust can cover the movement ball by passing time maintenance should be performed. 12
LEDed Optical Mice These types of mice enable motion by reflection of the LED emitted. Top version models has 1000 2000 dpi resolution. 13
Laser Optical Mice These types of mice enable motion by light emitted by laser light source. Bu tür Appropriate choice for those desire high resolution. Resolution can be 3000 dpi and more. If mice are categorized according to motion detection, most expensive is the laser optical mouse. 14
A trackball is a device which is very similar to a mouse. It consists of an upside down mouse, in which the ball on the bottom of the mouse has been turned up to the top. As the ball is rolled by the hand of user it moves and the cursor on the screen. It controls the position of the cursor on the screen with the direction of rotation controlling the direction of cursor movement and the distance the cursor travels controlled by the number of revolutions of the ball. Also some functional buttons can be added to the trackball similar to mouse. In CAD applications large balled models are preferred for better precision. Before the invention of touchpad the usage of trackball was common in laptop computers. The world's first trackball invented by Tom Cranston,(1952) With the end of 1990 s with the invention of scroll wheel that is used in mice the usage of trackball is decreased. Still used in cartography and similar applications. Logitech trackman 15
A Lightpen is an input device which allows interaction with a display from a computer screen. The lightpens can be used to input data as well as to draw as shown in the figure. The idea behind the lightpen is the familiarity of an ordinary writing. It is a direct and natural form of input. A light pen can work with any CRT based display, but not with LCD screens. A light pen is fairly simple to implement. A light pen works by sensing the sudden small change in brightness of a point on the screen when the electron gun refreshes that spot. By noting exactly where the scanning has reached at that moment, the X,Y position of the pen can be resolved. 16
Even invented in 1952 became popular in 1980 s. First Light pen 17
A touchpad (also trackpad) is a pointing device consisting of specialized surface that can translate the motion and position of a user's fingers to a relative position on screen. They are a common feature of laptop computers and also used as a substitute for a computer mouse where desk space is scarce. Touchpads vary in size but are rarely made larger than 40 square centimeters Touch pads consist of single plastic mylar membrane silkscreened with a silver conductive grid and two resistive strips and works in a similar way with touch screens except the fact that it works on a flat pad. When a key is pressed, two electrical resistances are reflected between a common line and the x and y output lines. 18
The touch screen, namely touch sensitive screen, works by direct user interaction with the CRT. A screen overlay is capable of sensing the physical contact of the operator's fingers or any other stylus on the screen. The screen overlay consists of transparent plates that fit over the screen and can convert the touch of the user, by optical, electrical or acoustical methods, into digital information consisting of several screen coordinates. The touch sensitive screen is utilised mainly to choose one out of a set of options presented in the panel. Just like on ATM machines, in industrial process control applications. It can also be used for drawing some shapes on the screen but since its accuracy is not great compared to other input devices not used for this purpose much. Disadvantages: Extended use causes tired arms, Smudges on screen, Insufficient accuracy for CAD applications based on pixel by pixel drawing. 19
20
3. CAD Input Devices Windows 7 supports touchscreen usage 21
The dials, which are used as valuators, are graphical devices adequate to input scalar values to application programs. They are rotary potentiometers grouped in special assemblies most commonly used to control rotation or linear movements of objects displayed on a screen. When the user moves the dial, the voltage being output is changed. The translation from voltage to digital information is made by analog to digital converters. The dials can be programmed to input values into the graphics program. Beside this some dials have a user programmable label. The label can indicate the function of the dial. As the functions of the dials change in the program the labels can be changed interactively so the functions of the dials are always clear. 22
Buttons and function switches are either toggle or push button switches. They may be either continuously closed, continuously open, or momentary contact switches. The most common convenient type of function switch incorporates both capabilities. Software controlled lights indicating which switches or buttons are active are usually provided. Buttons and switches are frequently incorporated into other devices. Switches make the on/off settings for input or mode of operations. 23
Clasical Joystick: Literally only 1 or 2 button + direction, functions as a control tool 24
Second Generation Joystick Second generation joysticks have more than two buttons and have perfect ergonomic structure, the routing function is analog and detects all kinds of precise orientation and most important is that it is a control device with input output function. analog controlled nintendo; first 64 then game cube applied Input output functions: In old times control devices only reflect the choice of the player to the game but by improving technology joysticks are changed and joysticks that response to sense are developed. These respond according to the movement they sense and generally vibration property is presented by game devices such as PlayStation (dual shock) Example: A crash in a car race is responded by the vibration of the joystick. 25
The best example to the last generation joysticks: Nintendo wii control device Cordless control Input output function Sensing function: Sensing function enables the player s the movements to be sensed and converted to the game. Example: In a tennis play the movement of player s hand is simulated as a movement of tennis racket 26
3. CAD Input Devices Nintendo wii 27
A voice entry system (VDE) consists of a microphone attached to a speech recognition device, which in turn transmits voice command information to a computer. As it can be understood from its name VDE working principal is data entry through voice commands. When user sounds a command, the command is interpreted according to a preprogrammed definition of its meaning. 28
3D Data Acquisition Systems 3. CAD Input Devices 2D Image: (for each pixel: X and Y coordinates and light intensity). The intensity could be gray (8 bits: 0 255) or color RGB (24 bits). 3D Range Image/Data from Range Sensing Devices and 3D Camera data points defined by their x, y, z coordinates (cloud point data). Mechanical probe (measurement and scanning) Laser scanning Triangulation based range sensing devices Time of flight based range sensing devices Machine vision based CAD model generation for: reverse engineering machine vision and intelligent robot vehicle size measurement and traffic monitoring scanning of 3D object, human body, and art work 29
Automotive Design and CAD Model Generation 3. CAD Input Devices Scanning of Clay Model to Obtain Surface Data Design Details Using CAD System 30
Full Size Foam Model Machined Using a 5 Axis CNC Mill from 3D CAD Model 3. CAD Input Devices 31
Scanners with Mechanical Probe 3. CAD Input Devices 32
CAD Modeling Based on a 3 D Vision System 3. CAD Input Devices 3D Range Sensors (3D Cameras): 3D Cloud Data Points Triangulation based: visible laser light, short range, accurate Time of flight based: laser light & micro wave, long range, less accurate Processing of 3D Range Data 3D Cloud Data Points Cross section based CAD Model Generation of a Complete Description for Objects and Workspace Sensor Fusion Forming a Surface Model and Carrying out Reverse Engineering Cross section based CAD Model Surface Model CNC Machining; RP; etc. 33
Multiple View Fusion and Model Integration 3. CAD Input Devices 34
Global Model Generation with Multiple View Fusion 3. CAD Input Devices 35
Automated Vehicle Dimension Measurement System for Commercial and Oversize Vehicles 3. CAD Input Devices Implemented at BC Ferries Terminal Real time Vehicle Dimension Measurement Complex Vehicle Shapes Dimensions Measured at Speeds up to 120 km/hr Adverse Weather Conditions Height and Width Accuracy: 15 cm Length Accuracy: 30 cm 36
Automated Real time Dimension Measurement of Moving Vehicles Using Infrared Laser Rangefinders 3. CAD Input Devices 37
38
39
40
Automated Real time Dimension Measurement of Moving Vehicles Using Infrared Laser Rangefinders 3. CAD Input Devices 41
Reverse Engineering and Automated CNC Tool Path Generation for Efficient and High Quality Sculptured Part Machining 3. CAD Input Devices Geometric Modeling Based on 3D Scanning Challenges: Accuracy/Lighting/Range (Selecting Right 3D Sensing Tech) Occlusion (Obstruction)/Multiple View Fusion Multiple Level Modeling: Cloud Data Points/Crosssections/ Surfaces/Solid Applications: Reverse Engineering (e.g. Face Mask) Size Measurement (e.g. Moving Vehicle) Object Recognition (e.g. Moving Vehicle) 3D Log CAD Model Generation 3D Sculpture Documentation ShoeMaking Character Modeling in Movies/Computer Games 42