One Source for Rig Handling Tools and Drilling Equipments Solution

One Source for Rig Handling Tools and Drilling Equipments Solution

Content Manual Tong Web Wilson Type AAX Manual Tong... 1 Web Wilson B Style & C Style Manual Tong... 3 Type B Manual Tong... 5 BJ Type DB Manual Tong... 7 BJ Type C Manual Tong... 8 BJ Type LF Manual Tong... 9 Type SB (HT 55) Manual Tong... 10 Type SDD (HT 100) Manual Tong... 11 Casing Tong... 12 Well Service Tong... 13 Power Tong Model 500 Power Tubing Tong... 14 Model 600 Power Tubing Tong... 15 Model 300M Rod Tong... 16 Elevator Type SLX Elevator... 17 Type TA Elevator... 18 G Series Elevator... 19 Y Series Slip Type Elevator... 20 Type SJ Elevator... 21 Type SP Auxiliary Elevato r... 22 VES-CL Elevator... 23 Flapper Elevator... 24

Spider Content Casing Elevator/Sp ider... 25 Casing Spider... 26 API Bowl... 27 Tubing Spider... 28 Slip Type SD Rotary Slip... 29 Baash-Ross Style DU Series Rotary Slip... 31 Woolley Type B Style Slip... 32 DCS Series Slip... 33 Woolley Type A Style Drill Collar Slip... 34 UC Casing Slip... 35 Casing Slip... 36 PS Series Pneumatic Slip... 37 Safety Clamp WA-C Safety Clamp... 38 WA-T Safety Clamp... 39 MP Safety Clamp... 40 Lift Adapter DC Lift Adapter... 41 Bail Extension Bail Extensio n... 42 Weldless Link Weldless Link... 43 Stabbing Guide SG Stabbing Guide... 44

Casing Protector Content Casing Protector... 45 Kelly Bushing Roller Kelly Bushing... 46 Master Bushing Master Bushing & Insert... 47 DRILLING EQUIPMENT Jointed Hook-Block... 49 Rotary Swivel... 51 Rotary Table... 53 Pump F Series Triplex Mud Pump... 55 PZ Series Triplex Mud Pump... 57 Smart Roughneck System Smart Roughneck System... 58 Load Test Machine Hydra Load Test Machine... 59 Drawworks 450 SD Drawwo rks... 60 750 SD Drawwo rks... 61 Manifolds Manifo lds... 62 Trailer Trailer... 63 Dies & Drift Dies/Drift... 65

Web Wilson Type AAX Manual Tong Manual Tong ALCO AAX Extra-Heavy Tong is an all-purpose heavy-duty drilling tong recommended for severe service. Eight lug jaws handle pipes ranging from 2-7/8" to 13-3/8". ALCO AAX Manual Tong can be applied in cold weather area with its cold resistant material. Latch Lug Jaws mm Handling O.D. in Max. Torque ft-lbs 1# 73-95.3 2 7 /8-3 3 /4 2# 88.9-114.3 3 1 /2-4 1 /2 3# 101.6-133.4 4-5 1 /4 55000 4# 127-184.2 5-7 1 /4 5# 174.6-219.1 6 7 / 8-8 5 / 8 6# 228.6-273.1 9-10 3 / 4 7# 273.1-298.5 10 3 / 4-11 3 / 4 30000 8# 339.7 13 3 / 8 1

AAX Manual Tong Manual Tong PRINCIPAL DIMENSIONS Tong Type A B C D E AAX(Standard Lever) 52-3/4" 49-1/2" 23" 13" 5" AAX(Short Lever) 44-3/4" 41-1/2" 23" 13" 5" AAX(Extra Short Lever) 35-1/4" 32" 23" 13" 5" 2

Web Wilson B Style & C Style Manual Tong Manual Tong ALCO offers the Web Wilson Type B Style & C Style Manual Tong with torque ratings from 10,000-35,000 ft-lbs for tubing, casing and drill strings. They can be adjusted by changing latch lug jaws. 3

Manual Tong WWB Manual Tong Latch Lug Jaws mm Handling O.D. in Max. Torque ft-lbs 1# 60.3-95.3 2 3 / 8-3 3 / 4 2# 88.9-117.5 3 1 / 2-4 5 / 8 3# 114.3-146.1 4 1 / 2-5 3 / 4 35000 4# 133.4-184.2 5 1 / 4-7 1 / 4 5# 174.6-219.1 6 7 / 8-8 5 / 8 6# 228.6-273.1 9-10 3 / 4 25000 WWC Manual Tong Latch Lug Jaws mm Handling O.D. in Max. Torque ft-lbs 1# 60.3-88.9 2 3 / 8-3 1 / 2 2# 73-108 2 7 / 8-4 1 / 4 20000 3# 101.6-146.1 4-5 3 / 4 4# 146.1-177.8 5 3 / 4-7 5# 184.2-219.1 7 1 / 4-8 5 / 8 15000 6# 244.5-273.1 9 5 / 8-10 3 / 4 10000 4

Type B Manual Tong Manual Tong ALCO Type B Manual Tong is an essential tool in oil drilling operation to make-up and break-out drill pipe, casing joint and coupling. It can be adjusted by changing latch lug jaws and handling shoulders. 5

Type B Manual Tong Manual Tong Latch Lug Jaws Handling Shoulder Handling O.D. mm (in) Max. Torque ft-lbs 5a 5b 5b-1 5c 5d 5e 5e1 1 3 3 / 8-4 1 / 8 (85.7-104.8) 2 4 1 / 8-5 1 / 4 (104.8-133.3) 1 4 1 / 4-5 1 / 4 (107.9-133.3) 2 5-5 3 / 4 (127-146) 3 6-6 3 / 4 (152.4-171.4) 1 5 1 / 4-5 3 / 4 (133.3-146) 2 6-6 5 / 8 (152.4-168.3) 3 6 3 / 4-8 (171.4-203.2) 1 6 5 / 8-7 3 / 8 (168-187) 2 7 3 / 8-8 (187-203) 3 8 1 / 2-8 5 / 8 (216-219) 1 8 1 / 2-9 5 / 8 (216-244) 2 10 5 / 8-10 3 / 4 (270-273) 1 11 3 / 4 (298) 2 12 3 / 4 (324) 1 10 3 / 4 (273) 2 11 3 / 4 (298) 40000 55000 55000 55000 40000 40000 40000 40000 5e3 1 13 (330) 13 3 / 8 (340) 40000 6

BJ Type DB Manual Tong Manual Tong ALCO BJ Type DB Manual Tong is used for making up and breaking out of drill tools, casing joint and coupling. It can be adjusted by changing latch lug jaws to hold strings of different sizes. Latch Lug Jaws Hole No. of Pin Shaft in Handling O.D. mm Max. Torque ft-lbs 1 3 1 / 2-6 89-152 1 # 2 5 3 / 4-7 146-178 3 6 5 / 8-8 1 / 4 168-210 65000 # 1 8-9 5 / 8 203-244 2 2 10 5 / 8-11 1 / 4 270-286 3 # 1 11 3 / 4-12 3 / 4 298-324 2 13 3 / 8-14 3 / 8 340-365 40000 4 # 2 16-17 406-432 7

BJ Type C Manual Tong Manual Tong ALCO BJ Type C Manual Tong is applied to make up and break out pipes of 2 3 / 8-8 5 / 8 in O.D. It is designed and manufactured according to API Spec 7K. Latch Lug Jaws Short Jaw No. Hinge Jaw No. 1 # Handling O.D. in mm 2 3 / 8-3.668 60.3-93.2 Max. Torque ft-lbs 2 # 2 7 / 8-4 1 / 4 73-108 1 # / 3 # 3 1 / 2-5 1 / 4 88.9-133.4 4 # 5 1 / 4-7 133.4-177.8 35000 5 # 2 # 1 # 7-8 5 / 8 177.8-219.1 6 # 2 # 9 5 / 8-10 3 / 4 244.5-273.1 8

BJ Type LF Manual Tong Manual Tong ALCO BJ Type LF Manual Tong is necessary for making up and breaking out pipes during well servicing operation. By changing lug jaws and handling shoulders it can handle pipes of 2 3 / 8-7 in O.D. Latch Lug Jaws Handling Shoulder in Handling O.D. mm 1 # 1 2 3 / 8-2 7 / 8 60.3-73 2 2 7 / 8-3 1 / 2 73-88.9 2 # 1 3 1 / 2-4 1 / 4 88.9-108 2 4 1 / 4-5 108-127 3 # 1 4 3 / 4-5 1 / 2 120.7-139.7 2 5 1 / 2-6 1 / 4 139.7-158.8 4 # 1 5 3 / 4-6 3 / 8 146.1-161.9 2 6 3 / 8-7 161.9-177.8 Max. Torque ft-lbs 16000 9

Type SB (HT 55) Manual Tong Manual Tong ALCO Type SB Manual Tong is an essential tool in oil drilling operation to fasten and remove the screws of drill pipe, casing joint and coupling. It can be adjusted by changing latch lug jaws and handling shoulders to hold tubular s of different sizes. Latch Lug Jaws Handling Shoulder in Handling O.D. mm 1 # 1 1 1 3 / 2-4 / 8 88.9-104.8 2 4 1 / 8-5 104.8-127 2 # 2 5-5 3 / 4 127-146.1 1 4 / 4-5 1 / 4 108-133.4 3 6-6 3 / 4 152.4-171.5 3 # 2 7 3 / 8-8 187.3-203.2 1 6 5 / 8-7 1 / 4 168.3-184.2 3 8 1 / 2-9 216-228.6 5 4 # 1 9-9 / 8 228.6-244.5 2 10 5 / 8-10 3 / 4 270-273.1 5 # 1 11 3 / 4 298.5 6 # 1 12 3 / 4-13 324-330.2 7 # 1 13 3 / 8 340 Max. Torque ft-lbs 35000 55000 40000 30000 10 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Type SDD (HT 100) Manual Tong Manual Tong ALCO Type SDD Manual Tong is applied to make up and break out drill tools, casing joint and coupling. Changing lug jaws and handling shoulders can adjust different handling sizes of the tong. Latch Lug Jaws 1 # Hole No. of Pin Shaft I II III Handling Shoulder in Handling O.D. mm 1 4-5 1 /2 101.6-139.7 2 5 1 /2-5 3 /4 139.7-146 1 1 5 5 / 2-6 / 8 139.7-168.3 2 6 1 /2-7 1 /4 165.1-184.2 1 6 5 /8-7 5 /8 168.3-193.7 2 7 3 /4-8 1 /2 196.9-215.9 I 1 8 1 /2-9 215.9-228.6 2 # 2 9 1 /2-10 3 /4 241.3-273 II 2 10 3 /4-12 273-304.8 I 1 12-12 3 /4 304.8-323.8 3 # 1 13 3 /8-14 339.7-355.6 II 2 15 381 Max. Torque ft-lbs 100000 75000 4 # II 1 15 3 /4 400 100000 5 # 1 16 406.4 II 60000 2 17 431.8 11 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Casing Tong Manual Tong ALCO Casing Tong is capable of making up and breaking out the screws of casing and casing couplings in drilling operation. Model mm Handling O.D. in Max. Torque ft-lbs Q13 3 / 8-25 1 / 2 / 35 Q25 1 / 2-36 / 55 340-368 13 3 /8-14 1 /2 368-406 14 1 /2-16 406-445 16-17 1 /2 445-483 17 1 /2-19 483-508 19-20 508-546 20-21 1 /2 546-584 21 1 /2-23 610-648 24-25 1 /2 648-686 25 1 /2-27 686-724 27-28 1 /2 724-762 28 1 /2-30 762-803 30-31 5 /8 800-838 31 1 /2-33 838-876 33-34 1 /2 876-914 34 1 /2-36 25000 40000 12 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Well Service Tong Manual Tong ALCO Well Service Tong is used to fasten and remove the screws of drill tool and casing in drilling and well servicing operation. The handling size of this tong can be adjusted by changing latch lug jaws. Latch Lug Jaws in Handling O.D. mm Max. Torque ft-lbs 1 # 2 3 / 8-4 1 / 2 60.3-114.3 2 # 4 1 / 2-6 1 / 2 114.3-165.1 3 # 6 1 / 2-8 5 / 8 165.1-219.1 25000 4 # 9 5 / 8-10 3 / 4 244.5-273.1 13 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Gill Power Tong Model 500 Power Tubing Tong Size Range 1 5/16 to 7 (33.3mm to 177.8mm) High Gear Low Gear Standard Torgue @ 2000 psi (138 bars) Ft-Lbs N.m Ft-Lbs N.m 1300 1763 6000* 8136 Speed @ 33.5 gpm (127 LPM) 126 rpm 27 rpm Weight w/back-up Tool and Transport Rack 1289 Lbs (553 Kg) * Model 500 Ht 8000 Ft-Lbs (10848 Nm) 14 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Gill Power Tong Model 600 Power Tubing Tong Size Range 1 5/16 to 7 (33.3mm to 177.8mm) Torque @ 2000 psi (138 bars) High Gear Low Gear Ft-Lbs (N.m) 2500 (3390) 15,000 * (20340) Speed (rpm) @ 33.5 gpm (127 LPM) 76 11 Weight w/back-up Tool and Transport Rack 2100 Lbs (953 Kg) * Model 6000LT 12000 Ft Lbs (16272 Nm) 15 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Gill Power Tong Model 300M Rod Tong Size Range 1/2 to 1 1/8 (1.27mm to 28.6mm) Torque @ 2000psi (138 bars) Ft-Lbs N.m High Gear 1000 (1356) Low Gear 1400 (1898) Combined 2400 (3254) Speed (rpm) @ 25gpm (95LPM) Weight w/backup Tool High 95 Low 23 360 Lbs (163 Kg) 16 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Type SLX Elevator Elevator ALCO Type SLX Elevators are hoisting tools for drill pipe, casing, tubing and drill collar in oil and gas field. They are designed and manufactured according to API Spec 8A for Drilling and Production Hoisting Equipment. Model Application Range (in) Max. Load (ton) 3 1 / 2-5 1 / 2 SLX/65 SLX/100 SLX/150 SLX/250 SLX/350 SX/350-500 5 3 / 4-8 5 / 8 9-10 3 / 4 11-14 1 / 4 2 3 / 8-2 7 / 8 4 1 / 2-5 3 / 4 5 1 / 2-8 5 / 8 9 5 / 8-10 3 / 4 11 3 / 4-13 3 / 8 5 1 / 2-7 3 / 4 8 5 / 8-10 3 / 4 11 3 / 4-14 16-20 22-30 4 1 / 2-6 6 5 / 8-9 5 / 8 11 3 / 4-14 7-16 18 5 / 8-20 65 100 150 250 350 500 (350) 17 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Type TA Elevator Elevator ALCO Type TA Elevators are hoisting tools for tubing, casing, drill pipe and drill collar during drilling and well servicing operation. The Elevators are designed and manufactured according to API Spec 8A for Drilling and Production Hoisting Equipment. Model Application Range (in) Rated Load (ton) TA/35 1.05-2 7 / 8 35 TA/65 1.66-2 7 / 8 65 TA/100 2 3 / 8-2 7 / 8 2 3 / 8-5 100 TA/150 4 1 / 8-8 5 / 8 9-11 1 / 4 150 18 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

G Series Elevator Elevator ALCO G Series 18 Bottleneck Elevators provide center latch operation for running external upset drill pipe from 100 to 350 ton loads. They will exceed the API safety factor for handling its load capacity. ALCO G Series Elevators have a safety latch and latch lock combination to prevent equipment induced accidents. Type Handling Pipe Size in Load Capacity ton MG 2 3 / 8-5 100 RG 2 3 / 8-5 1 / 2 150 MGG 3 1 / 2-5 1 / 2 250 GG 4-5 1 / 2 350 HGG 3 1 / 2-6 5 / 8 500 19 E-mail: ot_sales01@alcoinc.ca Phone: (780) 442-3499 Fax: (780) 436-6264

Y Series Slip Type Elevator Elevator ALCO Y Series Slip Type Elevators are hoisting tools for tubular in oil and gas field, especially fit for integral joint tubing, non-coupled casing, electric submersible pump and other tubular. Application Range Max. Load Type Slip Body Size (in) Pipe Size (in) ton (kn) MYT 2 7 / 8 1.315-2 7 / 8 40 (360) YT HYT YC MYC HYC 2 7 / 8 1.315-2 7 / 8 3 1 / 2 2 7 / 8-3 1 / 2 2 7 / 8 2 3 / 8-2 7 / 8 3 1 / 2 2 7 / 8-3 1 / 2 4 1 / 2 3 1 / 2-4 1 / 2 5 1 / 2 5-5 1 / 2 7 6 5 / 8-7 4 1 / 2 3 1 / 2-4 1 / 2 5 1 / 2 5-5 1 / 2 7 6 5 / 8-7 4 1 / 2 3 1 / 2-4 1 / 2 5 1 / 2 5-5 1 / 2 7 6 5 / 8-7 7 5 / 8 7 5 / 8 75 (675) 150 (1350) 75 (675) 125 (1125) 200 (1800) 20

Type SJ Elevator Elevator ALCO Type SJ Single Joint Elevators are hoisting tools for handling casing and other tubular in oil and gas field. They are designed and manufactured according to API Spec 8A for Drilling and Production Hoisting Equipment. Model Application Range (in) Max. Load (ton) 2 3 / 8-5 3 / 4 6-7 3 / 4 8 5 / 8-10 3 / 4 SJ 11 3 / 4-20 5 21 1 / 2 24 1 / 2 26-36 21

Elevator Type SP Auxiliary Elevator ALCO Type SP Auxiliary Elevator is applied to hoist tubing, casing and drill pipe with tapered joint. It is designed and manufactured according to API Spec 8A/8C. Model Application Range (in) Max. Load (ton) 2 3 / 8-5 1 / 2 SP5 6 5 / 8-7 5 / 8 8 5 / 8-9 7 / 8 SP12 SP18 10 3 / 4 2 3 / 8-3 1 / 2 4-4 1 / 2 2 7 / 8-3 1 / 2 4-5 5 1 / 2-6 5 / 8 5 22

Elevator VES-CL Elevator ALCO VES-CL Elevator is the most flexible system in use for either manual or hydraulic operation. Each body is able to handle all pipe types and sizes by easily changeable bushings. It is available in load ratings of 150, 250 and 350 tons and manufactured according to latest API-8C, PSL 1 standards. Model Pipe Size Range (in) Load Rating (ton) Options Various Sizes VES-CL 150 Various Sizes Various Sizes 150 Manually or Hydraulically operated Various Sizes Various Sizes VES-CL 250 Various Sizes Various Sizes Various Sizes 250 Manually or Hydraulically operated Various Sizes VES-CL 350 Various Sizes Various Sizes Various Sizes 350 Manually or Hydraulically operated 23

Elevator Flapper Elevator ALCO Flapper Elevator can apply to pipe sizes of 2 3 / 8, 2 7 / 8, 3 1 / 2 and 4 1 / 2 inches. The load rating can be either 75 ton or 100 ton. 24

Elevator/Spider Casing Elevator/Spider ALCO Casing Elevators/Spiders are tools for handling casing from 4 1 / 2-24 inch O.D. with capacity of 350 and 500 tons. They are designed and manufactured according to API Spec 8A for Drilling and Production Hoisting Equipment. Casing Size (in) 4 1 / 2, 5, 5 1 / 2, 5 3 / 4, 6 5 / 8, 7, 7 5 / 8, 7 3 / 4, 8 5 / 8, 8 3 / 4, 9 5 / 8, 9 3 / 4, 9 7 / 8, 10 3 / 4, 10 7 / 8, 11 3 / 4, 11 7 / 8, 13 3 / 8, 13 1 / 2, 13 5 / 8, 13 3 / 4, 14, 16, 18 5 / 8, 20, 24 Max. Load ton (kn) 350(3150) 500(4500) 25

Casing Spider Spider ALCO Casing Spider has a hinged spider body with a split insert bowl. Combined with rotary table, it handles most casings of different sizes. It is designed and manufactured according to API Spec 7K. Model Pipe Size (in) Taper Max. Load (ton) HCS20/500 2 3 / 8-20 1:3 500 JOY13 3 / 8 / 200 JOY20/200 7-8 5 / 8 1:3 9-13 3 / 8 1:4 7-8 5 / 8 1:3 9-20 1:4 200 JOY30/200 16-30 1:4 JOY36/200 18 5 / 8-36 1:4 JOY30/500 16-30 1:3 JOY36/500 18 5 / 8-36 1:3 500 26

API Bowl Spider ALCO API Bowl has a hinged spider body. Combined with rotary table in application, it handles most casings and tubing of different sizes. It is designed and manufactured according to API Spec 7K. Model Application Range (in) Taper Max. Load (ton) 8 5 / 8 / 100 2 3 / 8-8 5 / 8 1:3 100 10 3 / 4 / 100 9 5 / 8-10 3 / 4 27

Tubing Spider Pneumatic Spider ALCO Models B, C, CHD and E Tubing Spiders are pneumatic spiders utilized to handle various tubing sizes and load ratings. Tubing spiders use two slip body assembly halves. Model Slip Body (in) Handling Pipe Size (in) Max. Load (lb) C CHD HD E 3 1 / 2 1.315~3 1 / 2 4 1 / 2 3 1 / 2 ~4 1 / 2 Solid Slip Body 4 3 / 4 ~5 1 / 2 3 1 / 2 1.315~3 1 / 2 4 1 / 2 3 1 / 2 ~4 1 / 2 Solid Slip Body 4 3 / 4 ~5 1 / 2 3 1 / 2 1.315~3 1 / 2 4 1 / 2 3 1 / 2 ~4 1 / 2 Solid Slip Body 4 3 / 4 ~5 1 / 2 3 1 / 2 2 3 / 8 ~3 1 / 2 5 1 / 2 4~5 1 / 2 7 5 1 / 2 ~7 Solid Slip Body 7 5 / 8 160000 240000 250000 350000 28

Type SD Rotary Slip Slip ALCO Rotary Slips can accommodate drill pipe of 2 3 / 8 to 7 inch (60.3-177.8mm) O.D. They are classified as type Short (SDS), Medium (SDML) and Extra Long (SDXL) according to gripping length. SDS slips are designed for shallow well drilling; SDML slips are the perfect choice for all medium depth drilling; SDXL slips are designed for deep drilling. 29

Type SD Rotary Slip Slip Model Slip Body 3 1 / 2 4 1 / 2 SDS SDML SDXL Drill Pipe O.D. Weight Drill Pipe O.D. Weight Drill Pipe O.D. Weight in 2 3 /8 2 7 /8 3 1 /2 3 1 /2 4 4 1 /2 mm 60.3 73.0 88.9 88.9 101.6 114.3 kg 53.1 50.3 48.5 64.9 61.7 57.6 lb 117 111 107 143 136 127 in 2 3 /8 2 7 /8 3 1 /2 3 1 /2 4 4 1 /2 mm 60.3 73.0 88.9 88.9 101.6 114.3 kg 87.5 85.3 81.6 94 90.3 85.3 lb 193 188 180 207 199 188 in - - - 3 1 /2 4 4 1 /2 mm - - - 88.9 101.6 114.3 kg - - - 103.9 99.3 93 lb - - - 229 219 205 Model Slip Body 5 5 1 / 2 SDS SDML SDXL Drill Pipe O.D. Weight Drill Pipe O.D. Weight Drill Pipe O.D. Weight in 4 4 1 /2 5 mm 101.6 114.3 127 kg 82 79 75 lb 181 174 165 in 4 4 1 /2 5 4 1 /2 5 5 1 /2 mm 101.6 114.3 127 114.3 127 139.7 kg 92.5 88.9 84 101 97 92 lb 204 196 185 223 214 203 in 4 4 1 /2 5 4 1 /2 5 5 1 /2 mm 101.6 114.3 127 114.3 127 139.7 kg 107.5 103 96.6 116 111 112 lb 237 227 213 256 245 247 Model Slip Body 5 7 / 8 7 Drill Pipe in - 5 3 /4 5 7 /8-6 5 / 8 7 O.D. mm - 146.1 149.2-168.3 177.8 SDXL kg - - Weight lb - - 30

Baash-Ross Style DU Series Rotary Slip Slip ALCO supplies two models of DU Series Rotary Slips: DU and DUL. Heat-treated for strength and wear resistance, the slip features large handling range, light weight and larger contact area on the taper. Model Slip Body Size 4 1 / 2 DU DUL Drill Pipe O.D. Drill Pipe O.D. in 2 3 / 8 2 7 / 8 3 1 / 2 4 4 1 / 2 mm 60.3 73.0 88.9 101.6 114.3 in 2 3 / 8 2 7 / 8 3 1 / 2 4 4 1 / 2 mm 60.3 73.0 88.9 101.6 114.3 Model Slip Body Size 5 1 / 2 DU DUL Drill Pipe O.D. Drill Pipe O.D. in 3 1 / 2 4 4 1 / 2 5 5 1 / 2 mm 88.9 101.6 114.3 127 139.7 in 3 1 / 2 4 4 1 / 2 5 5 1 / 2 mm 88.9 101.6 114.3 127 139.7 Model Slip Body Size 7 DU Drill Pipe O.D. in 4 1 / 2 5 5 1 / 2 6 5 / 8 7 mm 114.3 127 139.7 168.3 177.8 DUL Drill Pipe O.D. in 4 1 / 2 5 5 1 / 2 6 5 / 8 7 mm 114.3 127 139.7 168.3 177.8 31

Woolley Type B Style Slip Slip ALCO carries three sizes of B Slips: short, long and extra long, to handle all size wells to be drilled. They have a unique torque transfer slot preventing excess wear and pressure and inserts are designed with flat backs so load is transferred to slip body. Slip inserts are easily replaced with removal of one retaining pin. Model Slip Body 4 1 / 2 Well Depth (ft) B short Drill Pipe O.D. in 2 3 / 8 2 7 / 8 3 1 / 2 4 4 1 / 2 mm 60.3 73.0 88.9 101.6 114.3 8000 B long Drill Pipe O.D. in 2 3 / 8 2 7 / 8 3 1 / 2 4 4 1 / 2 mm 60.3 73.0 88.9 101.6 114.3 18000 Model Slip Body 4 1 / 2 5 Well Depth (ft) B extra long Drill Pipe O.D. 1 1 1 in 3 / 2 4 4 / 2 4 4 / 2 5 mm 88.9 101.6 114.3 101.6 114.3 127 28500 *Flexible handle can be equipped upon customers requirements. 32

DCS Series Slip Slip ALCO supplies three models of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6) O.D. Model DCS-S DCS-R in 3-4 4-4 7 / 8 4 1 / 2-6 5 1 / 2-7 Drill Collar 76.2 101.6 114.3 139.7 O.D. mm 101.6 123.8 152.4 177.8 kg 51 47 54 51 Weight lb 112 103 120 112 Insert Bowl No. API or No.3 Model DCS-L in 6 3 / 4-8 1 / 4 8-9 1 / 2 8 1 / 2-10 9 1 / 4-11 1 / 4 11-12 3 / 4 12-14 Drill Collar 171.5 203.2 215.9 235.0 279.4 304.8 O.D. mm 209.6 241.3 254 285.8 323.9 355.6 kg 70 78 84 90 116 107 Weight lb 154 173 185 198 256 237 Insert Bowl No. API or No.3 No.2 No.1 33

Woolley Type A Style Drill Collar Slip Slip ALCO A Style Drill Collar Slip is a multi-segment slip accommodating the changes of drill collar O.D. with abrasion. It features light weight, large handling scale and reliable quality. Drill Collar O.D. in 3-41 / 1 3 2 3 / 4-4 / 1 3 4 4 / 4-5 / 1 4 5 / 2-7 63 / 1 4-8 / 1 4 8 / 4-10 10-11 3 / 4 mm 114.3 120.7 127 139.7 146.1 152.4 168.3 Insert Bowl No. API or No.3 No.2 34

UC Casing Slip Slip ALCO UC-3 Casing Slip is multi-segment slip of 3" taper (except 8 5 / 8 " down which has 4" taper). They should be combine-used with spiders and insert bowls of same taper. The slips are designed and manufactured according to API Spec 7K. Application Range (in) Slip Body (in) Slip Segments Insert Qty. Taper 7 7 5 /8 8 5 /8 9 9 5 /8 8 5 / 8 10 10 1:3 10 3 / 4 10 10 1:4 10 3 /4 11 3 /4 12 3 /4 13 3 / 8 12 12 1:4 13 3 /8 16 14 14 18 5 /8 17 17 20 17 17 22 1 /2 19 19 24 13 3 / 8 19 19 26 21 21 30 24 24 36 28 28 42 32 32 1:4 35

Casing Slip Slip ALCO Casing Slips accommodate casing from 4 1 / 2 to 30 inch (114.3-762mm) O.D. Casing in 4 1 / 2 4 3 / 4 5 5 1 / 2 5 3 / 4 6 6 5 / 8 7 7 5 / 8 8 5 / 8 O.D. mm 114.3 120.7 127 139.7 146.1 152.4 168.3 177.8 193.7 219.1 Weight kg 89 84 75 82 lb 196 184 166 181 Segment Qty. 9 12 12 12 13 Insert No. API or No.3 Casing in 9 5 / 8 10 3 / 4 11 3 / 4 13 3 / 8 16 18 5 / 8 20 24 26 30 O.D. mm 244.5 273.1 298.5 339.7 406.4 473.1 508 609.6 660.4 762 kg 87 95 118 112 140 167 174 201 220 248 Weight lb 192 209 260 247 308 367 383 443 486 546 Segment Qty. 14 15 17 18 21 25 26 30 33 37 Insert No. No.2 No.1 Relevant Casing Bushing 36

PS Series Pneumatic Slip Pneumatic Slip ALCO PS Series Pneumatic Slips fit all kinds of rotary tables for hoisting drilling tubular oil drilling and workover service, not only reducing workload but also improve work efficiency. Model Rotary Table Size Applicable tubular O.D. (in) Rated Capacity (ton) Working Pressure (Mpa) PS 175 17-1/2 2 3 / 8-5 3 / 4 150 PS 205 20-1/2 2 3 / 8-5 3 / 4 250 PS 275 27-1/2 2 3 / 8-9 7 / 8 350 PS 375 37-1/2 2 3 / 8-14 500 PS 16 27-1/2, 37-1/2, 49-1/2 3 1 / 2-7 3 / 4 500 0.6-0.8 PS Portable 23, 27-1/2, 37-1/2, 49-1/2 pin drive 2 3 / 8-5 1 / 2 250 350 PS Slant Hole for slant hole drilling 2 7 / 8-13 3 / 8 250 Russian Style 560 560mm through hole 1.9-7 350 37

WA-C Safety Clamp Safety Clamp ALCO Safety Clamps are tools for handling flush joint pipe and drill collar. Model WA-C Safety clamps can accommodate pipe from 3 1 / 2 to 15 5 / 8 inch O.D. Model WA-C Application Range Weight Links mm (in) kg lb 88.9-117.5(3 1 / 2-4 5 / 8 ) 7 20.9 46 114.3-142.9(4 1 / 2-5 5 / 8 ) 8 25.0 55 139.7-168.3(5 1 / 2-6 5 / 8 ) 9 27.7 61 165.1-193.7(6 1 / 2-7 5 / 8 ) 10 29.1 64 190.5-219.1(7 1 / 2-8 5 / 8 ) 11 31.3 69 215.9-244.5(8 1 / 2-9 5 / 8 ) 12 32.7 72 241.3-270(9 1 / 2-10 5 / 8 ) 13 40.0 88 266.7-295.3(10 1 / 2-11 5 / 8 ) 14 41.8 92 292.1-320.7(11 1 / 2-12 5 / 8 ) 15 44.0 97 317.5-346.1(12 1 / 2-13 5 / 8 ) 16 46.3 102 342.9-371.5(13 1 / 2-14 5 / 8 ) 17 48.6 107 368.3-396.9(14 1 / 2-15 5 / 8 ) 18 50.9 112 38

WA-T Safety Clamp Safety Clamp ALCO Safety Clamps are tools for handling flush joint pipe and drill collar. Model WA-T Safety Clamps can accommodate pipe from 1 1 / 8 to 4 1 / 2 inch O.D. Model Application Range Weight Links mm(in) kg lb 28.6-50.8(1 1 / 8-2) 4 16.3 36 WA-T 54.0-82.6(2 1 / 8-3 1 / 4 ) 5 18.2 40 88.9-114.3(3 1 / 2-4 1 / 2 ) 6 20.0 44 39

MP Safety Clamp Safety Clamp ALCO MP Safety Clamps are essential tools for handling drill collars, flush joint pipes and small shoulder pipes. By adjusting the quantity of chains links they can fit pipes of different sizes. ALCO MP Safety Clamps are designed and manufactured according to API Spec 7K. Model MP-S MP-R MP-M Application Range (in) Links 2 7 /8-4 1 /8 7 Model Application Range (in) Links 15 7 /8-17 17 4-5 8 MP-L 17-18 1 /2 18 4 1 /2-5 5 /8 7 18 1 /8-19 3 /8 19 5 1 /2-7 8 19 3 /8-20 3 /8 19 6 3 /4-8 1 /4 9 20 3 /8-21 1 /2 20 8-9 1 /4 10 21-22 5 /8 21 9 1 /4-10 1 /2 11 22 5 /8-23 3 /4 22 10 1 /2-11 1 /2 12 MP-XL 23 3 /4-24 7 /8 23 11 1 /2-12 1 /2 13 24 7 /8-26 24 12 1 /2-13 5 /8 14 26-27 1 /8 25 13 5 /8-14 3 /4 15 29 3 /8-30 1 /2 28 14 3 /4-15 7 /8 16 40

DC Lift Adapter Lift Adapter ALCO DC Lift Adapter usually applied combined with drill collar elevators to lift drill collars. It is divided as collar type and 18º type to accommodate different requirements. DC Lift Adapter Collar Type 150T for 3 1 /2"EU & 3 1 /2"IU 150T for 4 1 /2"EU & 5"IEU DC Lift Adapter 18º Type 150T for 4" IU 150T for 4"EU & 4 1 /2"IU, IEU 150T for 4 1 /2"EU & 5"IEU 150T for 5 1 /2"IEU 150T for 3 1 /2"EU, 4 1 /2"EU & 5"IEU 150T for 6 5 /8"IEU Capacity 150 Tons 41

Bail Extension Bail Extension ALCO Bail Extensions are fabricated of high quality alloy and conforms to API Spec 8A/8C. The length can be customized upon requirements. Capacity A B C D E F G H I mm 150T 150 57 102 68 240 59 190 50 290 250T 200 71 140 78 250 71 210 50 300 350T 203 79 140 250 81 230 60 300 42

Weldless Link Weldless Link ALCO Weldless Links are integrally forged of high tensile alloy which are designed and manufactured conforming to API Spec 8A/8C. Model Max. Load (tons) Standard Working Length (mm) DH150 150 1800 DH250 250 2700 DH350 350 3300 DH500 450 3600 43

SG Stabbing Guide Stabbing Guide ALCO SG Stabbing Guides are easy to operate applied to protect the screw thread of pipes effectively. Model SG 2-3/8T SG 2-7/8T SG 3-1/2T SG 4T SG 4-1/2T SG 4-1/2C SG 5C SG 5-1/2C SG 6C SG 6-5/8C SG 7C SG 7-5/8C SG 8-5/8C SG 9-5/8C SG 10-3/4C SG 11-3/4C SG 13-3/8C SG 13-5/8C SG 14C SG 16C SG 18-5/8C SG 20C Applicable Tubular O.D. (in) 2-3/8 tubing 2-7/8 tubing 3-1/2 tubing 4 tubing 4-1/2 tubing 4-1/2 casing 5 casing 5-1/2 casing 6 casing 6-5/8 casing 7 casing 7-5/8 casing 8-5/8casing 9-5/8 casing 10-3/4 casing 11-3/4 casing 13-3/8 casing 13-5/8 casing 14 casing 16 casing 18-5/8 casing 20 casing 44

Casing Protector Casing Protector ALCO Quickly Casing Protector is applied to protect the screw thread of casings with easy operation and usage. Model Applicable Tubular O.D. (in) 4-1/2 4-1/2 casing 5 5 casing 5-1/2 5-1/2 casing 6-5/8 6-5/8 casing 7 7 casing 7-5/8 7-5/8 casing 8-5/8 8-5/8casing 9-5/8 9-5/8 casing 10-3/4 10-3/4 casing 13-3/8 13-3/8 casing 18-5/8 18-5/8 casing 20 20 casing 45

Roller Kelly Bushing Kelly Bushing ALCO Roller Kelly Bushings are used for 17 1 / 2-49 1 / 2 inch rotary tables. They are designed and manufactured according to API Spec 7K. Model Kelly Specification (in) Way of Drive Rotary Table Size (in) HDS 20HDP 27HDP 4KRVS 4KRBM SQ 2 1 / 2-6 HEX 3-6 SQ 2 1 / 2-6 HEX 3-6 SQ 2 1 / 2-6 HEX 3-6 SQ 2 1 / 2-4 1 / 4 HEX 3-4 1 / 4 SQ 2 1 / 2-5 1 / 4 HEX 3-4 1 / 4 Square Drive 17 1 / 2-27 1 / 2 20 1 / 2-22 1 / 2 Pin Drive 23-49 1 / 2 Square Drive 17 1 / 2-22 1 / 2 Square Drive 17 1 / 2-27 1 / 2 46

Master Bushing & Insert Master Bushing ALCO Master Bushings and Insert Bowls range from 17 1 / 2 to 49 1 / 2 inch. They are cast with high-quality alloy steel conforming to API Spec 7K. It can be combine-used with API standard rotary slip, drill collar slip, casing slip and roller kelly bushing. 47

Master Bushing & Insert Rotary Table Size Model (in) 17 1 / 2 18 MSS (Split) (Square Drive) 20 1 / 2 23 Master Bushing Handling O.D. Insert (in) - 2 3 / 8-8 5 / 8 27 1 / 2 MSS (Solid) (Square Drive) 17 1 / 2 20 1 / 2 22 23 27 1 / 2 1011 2 3 / 8-7 5 / 8 1024 2 3 / 8-8 5 / 8 1011 2 3 / 8-7 5 / 8 1024 2 3 / 8-8 5 / 8 1011 2 3 / 8-7 5 / 8 1024 2 3 / 8-8 5 / 8 1011 2 3 / 8-7 5 / 8 1024 2 3 / 8-8 5 / 8 1022 2 3 / 8-7 5 / 8 1025 2 3 / 8-8 5 / 8 1026 9 5 / 8-10 3 / 4 MDSP (Split) (Pin Drive) 17 1 / 2-2 3 / 8-8 5 / 8 20 1 / 2 2 3 / 8-8 5 / 8 Bowl 1809 2 3 / 8-8 5 / 8 20 1 / 2 Bowl 1902 9 5 / 8-10 3 / 4 MSPC (Solid) (Pin Drive) 23 27 1 / 2 Body only 1805 11 3 / 4-13 3 / 8 Bowl 1810(No.3) 2 3 / 8-8 5 / 8 Bowl 1904(No.2) 9 5 / 8-10 3 / 4 Bowl 1903(No.1) 11 3 / 4-13 3 / 8 Bowl 1810(No.3) 2 3 / 8-8 5 / 8 Bowl 1904(No.2) 9 5 / 8-10 3 / 4 Bowl 1903(No.1) 11 3 / 4-13 3 / 8 MSP (Split) (Pin Drive) 27 1 / 2-2 3 / 8-8 5 / 8 Bowl 6608(No.3) 2 3 / 8-8 5 / 8 37 1 / 2 Bowl 6609(No.2) 9 5 / 8-10 3 / 4 MPCH (Pin Drive) Bowl 6610(No.1) 11 3 / 4-13 3 / 8 MPCH37 1 / 2 +Bowl 6608(No.3) 2 3 / 8-8 5 / 8 49 1 / 2 MPCH37 1 / 2 +Bowl 6609(No.2) 9 5 / 8-10 3 / 4 MPCH37 1 / 2 +Bowl 6610(No.1) 11 3 / 4-13 3 / 8 48

Jointed Hook-Block DRILLING EQUIPMENT Hook-Block ALCO supplies complete series of Jointed Hook-Blocks with integral design which shortens the overall length of traveling system and satisfies the requirements of operating with top drive. ALCO jointed hook-blocks conform to API Spec 8C, and API monogram can be used. 49

DRILLING EQUIPMENT Jointed Hook-Block Hook-Block Model YG135/150 YG180/200 Load Rating kn(us tons) 1350 (150) 1800 (200) Sheave Dia. mm(in) 760 (30) 915 (36) 915 (36) Qty. of Sheaves 4 5 Drilling Line mm(in) 26 (1) 29 (1 1/8) 29 (1 1/8) Hook Opening mm(in) 150 (6) 200 (7.9) Overall Dimension (L W H) in 116 33 26 122 39 26 134 38 29 Weight kg(lbs) 3126 (6885) 3426 (7550) 4594 (10120) Model YG225/250 Load Rating kn(us tons) 2250 (250) Sheave Dia. mm(in) 915 (36) 1120 (44) Qty. of Sheaves 5 Drilling Line mm(in) 29 (1 1/8) 32 (1 1/4) 29 (1 1/8) 32 (1 1/4) Hook Opening mm(in) 190 (7.5) Overall Dimension (L W H) in 142 38 31 146 47 31 Weight kg(lbs) 6200 (13660) 6600 (14550) Model YG315/350 YG450/500 Load Rating kn(us tons) 3150 (350) 4500 (500) Sheave Dia. mm(in) 1120 (44) 1270 (50) 1524 (60) Qty. of Sheaves 5 6 Drilling Line mm(in) 35 (1 3/8) 32 (1 1/4) 35 (1 3/8) Hook Opening mm(in) 220 (8.7) 220 (8.7) Overall Dimension (L W H) in 159 47 35 165 53 35 192 63 35 Weight kg(lbs) 10229 (22530) 10860 (23920) 12530 (27600) 50

Rotary Swivel DRILLING EQUIPMENT Swivel ALCO Rotary Swivel is designed and manufactured in accordance with API Spec 8C. The wash pipe packing set assembly adopts cassette structure which can be exchanged quickly without disassembling rotary hose and gooseneck. There are 3LP and 4LP internal or external thread hose connection thread for option. 51

DRILLING EQUIPMENT Swivel Rotary Swivel Model SL135/150 SL160/180 SL180/200 Max. Static Load kn/us tons 1350/150 1600/180 1800/200 Max. Speed r/min 300 Max. Working Pressure MPa/psi 35/5000 Stem Dia. mm/in 60/2.36 70/2.75 Connection Tread stem 4 1 / 2 FH-LH 4 1 / 2 REG-LH 4 1 / 2 REG-LH kelly 6 5 / 8 REG-LH Overall Dimension (L W H) mm 2290 650 640 2470 790 680 2725 840 785 in 90 26 25 97 31 27 107 33 31 Weight kg/lbs 777/1700 1000/2200 1150/2500 Model SL225/250 **SL315/350 SL450/500 Max. Static Load kn/us tons 2250/250 3150/350 4500/500 Max. Speed r/min 300 Max. Working Pressure MPa/psi 35/5000 Stem Dia. mm/in 75/2.95 Connection Tread Overall Dimension (L W H) stem 6 5 / 8 REG-LH 7 5 / 8 REG-LH kelly 6 5 / 8 REG-LH mm 2970 990 980 3010 1040 980 3040 1110 1095 in 117 39 39 118 41 39 120 44 43 Weight kg/lbs 2500/5500 2600/5700 2700/5950 52

Rotary Table DRILLING EQUIPMENT Rotary Table ALCO Rotary Tables support counterforce of drill pipe and the mass of pipe string and strip drill pipe, also adjust and control direction of drilling bit. The pinion and gear are made of alloy steel. Effective lubrication and reliable seals are provided. ALCO offers rotary tables conforming to API Spec 7K. 53

Rotary Table DRILLING EQUIPMENT Rotary Table Model ZP175 ZP205 ZP205-II Opening Dia. mm(in) 444.5 (17-1/2) 520.7 (20-1/2) 520.7 (20-1/2) Table Center to Sprocket mm(in) 1118 (44) 1353 (53-1/4) 1118 (44) Max. Static Load kn(us ton) 2700 (300) 3150 (350) 3150 (350) Max. Working Torque Nm(ft-lbs) 13729 (10125) 22555 (16635) 22555 (16635) Max. Speed r/min 350 300 300 Gear Ratio 3.75 3.22 3.79 Overall Dimension (L W H) in 78 54 22 87 59 26 78 56 24 Weight kg(lbs) 3666 (8075) 5500 (12100) 5450 (12000) Model ZP275 ZP375 ZP495 Opening Dia. mm(in) 698.5 (27-1/2) 952.5 (37-1/2) 1257.3 (49-1/2) Table Center to Sprocket mm(in) 1353 (53-1/4) 1353 (53-1/4) 1651 (65) Max. Static Load kn(us ton) 4540 (500) 5850 (650) 7250 (800) Max. Working Torque Nm(ft-lbs) 27459 (20250) 32362 (23865) 37000 (27290) Max. Speed r/min 300 300 300 Gear Ratio 3.67 3.56 3.93 Overall Dimension (L W H) in 94 66 27 97 71 28 116 86 32 Weight kg(lbs) 6122 (13500) 7970 (17555) 11626 (25600) 54

F-Series Triplex Mud Pump DRILLING EQUIPMENT Pump ALCO F Series Triplex Mud Pump features reasonable design and unique substructure, resulting in compact size and light weight for the best yet in portability and convenient placement and removal, plus less wearable parts as another advantage. It is very practical, as it works under various conditions, such as service work, well of different depth, land operation and drilling or service platform offshore. 55

F Series Triplex Mud Pump DRILLING EQUIPMENT Pump Model F-1600 F-1300 F-1000 F-800 F-500 Type Three-Cylinder Single Action Piston Max. Bore Stroke 7" 12" 7" 12" 6 3 / 4 " 10" 6 3 / 4 " 9" 6 3 / 4 " 7 1 / 2 " Pressure w/ Max. Bore 3345psi (7") 2720psi (7") 2370psi (6 3 / 4 ") 1968psi (6 3 / 4 ") 1341psi (6 3 / 4 ") Pressure w/ Min. Bore 5000psi (5 1 / 4 ") 5000psi (5 1 / 4 ") 5340psi (4 1 / 2 ") 4415psi (4 1 / 2 ") 4850psi (3 1 / 2 ") Volume w/ Max. Bore 799gpm @ 130spm 799gpm @ 130spm 651gpm @ 140 pm 627gpm @ 150spm 575gpm @ 165spm Volume w/ Min. Bore 417gpm @ 130spm 417gpm @ 130spm 289gpm @ 140spm 279gpm @ 140spm 155gpm @ 165spm Nominal HP Rating 1600 @ 130spm 1600 @ 130spm 1000 @ 140spm 800 @ 150spm 500 @ 165spm Gear Ratio 4.206:1 4.206:1 4.32:1 4.31:1 4.38:1 56

PZ Series Triplex Mud Pump DRILLING EQUIPMENT Pump ALCO PZ Series Triplex Mud Pump adopts heat-treated alloy steel main gears bolted to the eccentric and equipped with three-rib API urethane insert valves and seats. It s an important part of well drilling and fluid transporting system. Model PAH PZ-7 PZ-9 Input Power Rating (HP) 275 550 1000 Rated Pump Speed 175 145 130 Stroke 8" 7" 9" Gear Ratio 4.7:1 4.625:1 4.483:1 Rod Load (lbs) 22,030 64,400 101,550 Rated Speed of Transmission Shaft (rpm) 823 670 582 Max. Working Pressure (Psi) 3,118 5,000 5,000 Max. Liner Diameter <15" <17" <17" Max. Displacement (gpm) 357 507 585 Weight (lbs) 9,810 16,765 28,425 57

Smart Roughneck System DRILLING EQUIPMENT Smart Roughneck System The Smart Roughneck System is a fully automated unit that spins, makes/breaks at regulated torque. It is operated from a touch screen and starts an automatic sequence that takes the unit to well center and waits until stump height is set, a further press of the button clamps the box end, the spinner spins the connecting tubular in or out as required, upper jaw clamps and unit either torques up to a reset value or breaks the connection, the spinner will spin out the connection, unit opens up and returns to park. 58

Hydra Load Test Machine DRILLING EQUIPMENT Load Test Machine Maximum Rating Current Test Ranges Maximum Hydraulic Pressure Gear Pump Speed 1500 tons (3,000,000 lbs) 1) 0 115 tons 2) 0 250 tons 3) 200 750 ton 6000 psi All connections pressure 20,595 psi Tubing Burst pressure 98 gpm Qty. of Hydraulic Cylinder 4 Max Capacity of Test Frame 1500 short tons Need upgrade to hydraulic system Max Capacity of Side Bail Pull Test Range for Bails Max Opening Size between Cylinders Max Opening Size between Top and Bottom Beams 550 tons per Bail Pair 3ft-15ft 6 6 Wide Horizontally 12 10 High Vertically 59

450 SD Drawworks DRILLING EQUIPMENT Drawworks Model 450 SD Maximum Input 450 HP / 335 kw Recommended Wire Line Size 1 Maximum Single Line Pull 42,000 lbs. / 18 680 KN Maximum Hook Load 152,000 lbs. / 67 600 KN with 4 Lines Strung 220,000 lbs. / 97 800 KN with 6 Lines Strung Main Drum Dia. x Width 18 x 36 Brake Rim Dia. X Width 38 x 8 Brake Contact Area 1,750 in2 Brake Cooling Type Air Brake Blocks 8 x 12 x 1-1/8 Clutch PO324 Chain 1-1/2 Double Standard Equipment Gear Box Right Angle Drive Greasing Central Greasing System Optional Equipment Auxiliary brake Kobelt 40 x 4 x 7 Air Supply Required Air pressure 100-130 psi (Max 150 psi) Miscellaneous Size(L x W x H) 97 x98-5/8 x54-3/4 Weight 12,000lbs(Approx.) RAG Box, Chains, Lubrication included 60

750 SD Drawworks DRILLING EQUIPMENT Drawworks Model 750 SD Maximum Input 750 HP / 559 kw Recommended Wireline Size 1-1/8 Maximum Single Line Pull 65,000 lbs. / 28 900 KN Maximum Hook Load 340,860 lbs. / 151 620 dan with 6 Lines Strung 437,840 lbs. / 194 760 dan with 8 Lines Strung 527,150 lbs. / 234 490 dan with 10 Lines Strung Main Drum Drum Dia. x Width 18 x 39 Without grooving Brake Rim Dia. x Width 42 x 8 Brake Contact Area 1670 in2 Brake Cooling Type Water, Ethylene Glycol Brake Blocks 8 x 12 x1-1/8 Clutch PO324 Chain 1-3/4 Triple Standard Equipment Gear Box Right Angle Drive Greasing Central Greasing System Optional Equipment Auxiliary brake Eaton 134WCBD/236WCBD Air Supply Required Air pressure 100-130 psi(max 150 psi) Miscellaneous Size(L x W x H) 118 x 115 x 55 Weight 23,000 lbs Gearbox included 61

Manifolds DRILLING EQUIPMENT Manifolds ALCO supplies drilling choke and kill manifolds suitable for well classes II to VI. -Engineering and design to meet specific customer requirements and specifications -Single and double gut-line 2-1/16 & 3-1/8 3000/5000/10,000 psi wp manual adjustable and remote operated chokes available with bi-directional flow slab gate valves -complete documentation packages for material traceability hydrostatic tested with computerized test charts -Manufactured to meet or exceed the following specifications API 6A 19th Ed. NACE MR01-75 / ISO 15156 PSL LEVEL 1, 2, AND 3 -Installation, service and re-certification also available -Qualified service technicians for on-site service 24/7z 62

HPU Trailer DRILLING EQUIPMENT Trailer Chassis: 14 ft. - 8 in. tube frame tandem axle c/w adjustable pintle hitch & safety chains Slipper ring torsion suspension, with 7000lb axles All wheel electric brakes c/w Break-away kit, battery and charger. ST 235/80 R16 tires, Load range E, on Alcoa polished aluminum rims, c/w spare tire and cover Wired with sealed beam, rubber mounted fixtures, certified to meet DOT standards. Reflective markers. Hitch mounted tool box and jack stand Mounted 10 lb. dry chemical fire extinguisher 63

DRILLING EQUIPMENT Trailer Detachable Hydraulic Power Unit c/w Drip tray and hose rack, including: Engine: Deutz D914L6 inline six cylinder air cooled diesel 112.6 H.P. @ 2300 RPM c/w SAE pump mount, 12 V starter, 14V alternator, oil bath air cleaner, manifold muffler, remote electronic throttle control and spark arrestor. Engine control panel including oil pressure, temperature, hours & volt gauges, key start switch. 8D 1600 12 volt heavy duty battery c/w box 50 gallon, 3/16 mild steel diesel reservoir c/w filler and two sight level glass plugs, inline fuel filter. Hydraulics: 100 gallon, steel hydraulic reservoir c/w top entry cleanout cover, baffle, filler breather and fluid level gauge. Geartek, auto unloading, 2 stage gear pump, (90 gpm hi-flow, 36 gpm low-flow) Parker cartridge style, full return flow oil filter c/w bypass and manual indicator Thermal Transfer, 100 gpm hydraulic oil cooler c/w hyd. driven fan, auto bypass and radiator protection cover. 100 ft hydraulic pressure and return hose assemblies including 8 foot hose whips and wing type quick couplers. Power Unit Package comes completely painted with Endura, Silver Metallic, and tested. 64

Dies TOOL & PARTS Dies & Drift ALCO supplies complete collection of dies and inserts for handling tools. Drift 65