polarity and blocking. direction CW looking at rotor. l Electrical connection via 2 leads AWG 2, TR 6. Stripped and tinned ends. l Mass 85 g. SERIES 600N VARIOFAN 60x60x25mm at 0 m /h CFM V DC V DC db(a) bels / Watt min - Hours Hours 55 55 8 0.6. 2 2 8...2.6-20...+65 80000 / 0000 5 20.6 28.6.6 00 2 2.5.7 2900 2 8...2.6-20...+65 70000 / 00 2. 5 5.2 2. 500 62NGMI 62NGNI Temperature sensor (NTCresistor ) for controlling the motor speed is positioned directly in the air flow. Versions with additional lead for connecting an external NTC-resistor upon request.

M E G A F A N MTHE ENEW GFAN AGENERATION F A N THE NEW FAN GENERATION polarity, blocking and overloading by PTC-resistor; partially impendance protected. l Electrical connection via leads AWG 2, TR 6. Stripped and tinned ends. l Mass 95 g. SERIES 800 N VARIOFAN 80x80x25mm at 20 m /h CFM V DC V DC db(a) bels / Watt min - Hours Hours 20.8 <0 ) 0.6 900 2 0... -20...+70 80000 / 00 9. 2.7 0.8 0 2 27 5.9 <0 ) 0.8 200 2 8... -20...+70 80000 / 00 5 26.5 9.. 20 5 20.6 < ).2 600 5 2 8... -20...+70 80000 / 0000 58. 26.7.5 2600 6 ) not measurable at 60 82NGLV 82NGMLV 82NGMV The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 70 see accessories.

M E G A F A N THE NEW FAN GENERATION polarity, blocking and overloading; partially impedance protected. l Electrical connection via leads AWG 2, TR 6. Stripped and tinned ends l Mass 00 g. SERIES 00N VARIOFAN 92x92x25mm at 20 m /h CFM V DC V DC db(a) bels / Watt min - Hours Hours 25. ). 2 8... -20...+70 700 / 0000 72 2. 28..8 200 2 29.5 6 ).9 600 28...2.6-20...+70 700 / 0000 8 9. 2.7 2. 2700 at 60 2 NGMV 2 NGV ) not measurable The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 70 see accessories.

polarity, blocking and overloading by PTC-resistor; partially impedance protected. direction CW looking at rotor. l Electrical connection via leads AWG 22, TR 6. Stripped and tinned ends l Mass 220 g. SERIES 00 VARIOFAN 9 x 9 x 2 mm The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 70 see accessories. AirFlow at 0 m /h CFM V DC V DC db(a) bels / Watt min - Hours Hours 70.2 22.7. 28...2.6-20...+65 70000 / 70 0 82. 9 5.. 200 2 85.0 29.2.8 00 28...2.6-20...+65 600 / 00 70 00.0 5 5.8 5. 2800 2MV 2V Rotor protrusion max. 0. mm

DC fans with electronically commutated With electronic protection against reverse polarity and blocking; electronic motor current limitation in the start-up phase and when rotor is blocked. Metal fan housing, impeller of fibreglass reinforced plastic PA. Air exhaust over struts. Rotational Electrical connection via 2 flat pins x 0.5 mm. Housing with ground lug and screw M x 8 (TORX). Mass 780 g. SERIES 6200 N 72Øx5mm at 0 m /h CFM V DC V DC db(a) bels / Watt min - Hours Hours 206.0 2 8...5 5.7 2.0 28-20...+72 80000 / 70 622NM 206.0 2 2...2 5.7 2.0 28-20...+72 80000 / 70 622NM 0 2. 2 2...28 55 6. 8.0 00-20...+ 72 700 / 00 2 622N 80 282.5 2 2...28 6 6.9 26.0 000-20...+72 600 / 0000 622NH 206.0 8 28...60 5.7.5 28-20...+72 80000 / 70 628NM 0 2. 8 28...60 55 6. 7.0 00-20...+72 700 / 00 2 628N Intelligent DC fans with temperature-dependent speed control 205 20.6 5.5 2 2...28-0...+72 770 / 00 0 2. 55 6. 8.0 00 5 622 NT 205 20.6 5.5 8 28...60-0...+72 770 / 00 0 2. 55 6. 7.0 00 5 628 NT Temperature sensor (NTCresistor) for controlling the motor speed is positioned directly in the air flow.

DC fans with electronically commutated With electronic protection against reverse polarity and blocking; electronic motor current limitation in the start-up phase and when rotor is blocked. Metal fan housing, impeller of fibreglass reinforced plastic PA. Air exhaust over struts. Rotational Electrical connection via 2 flat pins x 0.5 mm. Housing with ground lug and screw M x 8 (TORX). Mass 760 g. SERIES 600 72Øx5mm at 0 m /h CFM V DC V DC db(a) bels / Watt min - Hours Hours 97.2 2 8...5 52 6.0 2.0 28-20...+72 80000 / 70 62M 97.2 2 2...2 52 6.0 2.0 28-20...+72 80000 / 70 62M 0.9 2 2...28 57 6. 8.0 00-20...+ 72 700 / 00 2 62 80. 2 2...28 6 6.9 26.0 000-20...+72 600 / 0000 62H 97.2 8 28...60 52 6.0.5 28-20...+72 80000 / 70 68M 0.9 8 28...60 57 6. 7.0 00-20...+72 700 / 00 2 68H Intelligent DC fans with temperature-dependent speed control 205 57.0 7.9 2 2...28-0...+72 770 / 00 0.9 57 6. 8.0 00 5 62 T 205 57.0 7.9 8 28...60-0...+72 770 / 00 0.9 57 6. 7.0 00 5 68 T Temperature sensor (NTCresistor) for controlling the motor speed is positioned directly in the air flow.