Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements Total: 36 credits Curriculum Structure: A. Thesis 36 credits 254798 ME 798 Thesis 36 credits B. Non-credit Courses 1. Students may be required by the University and/or Graduate School to pass an English language proficiency test or otherwise register for improvement course(s). The credits earned (if any) cannot be counted as accumulated credits to fulfill program requirements. 2. The Department may require students to register for selected course(s), at either graduate or undergraduate level, outside the program as a condition for acceptance. program requirements. 3. Upon the thesis advisor s recommendation, students may be required to register for selected course(s), at either graduate or undergraduate level, outside the program. program requirements and are not transferable. C. Academic Activities 1. Students are required to report progress once every semester, the schedule and format for which will be arranged by the Department. 2. Students must participate in academic activities arranged for them by the Department. Students who fail to meet the above requirements, will have to carry out some other academic activities set by the program committee or will not be granted a degree. Study Plan for A1 Year 1 Proposal and other academic activities - Total - 254798 Thesis 12 Total 21 Year 2 254798 Thesis 12
Total 12 254798 Thesis 12 Thesis Defense - Total 12
Plan A 2 Degree Requirements Total: a minimum of 36 credits Curriculum Structure A. Coursework a minimum of 24 credits 1. Graduate Courses a minimum of 24 credits 1.1 Field of specialization courses a minimum of 24 credits 1.1.1 Required courses a minimum of 9 credits Select at least 3 subjects from 3.1.3(1) 1.1.2 Elective courses a minimum of 15 credits 1.1.2.1 Elective courses in field of specialization a minimum of 12 credits From 3 fields of specialization in 3.1.3(2), select 12 credits from one field that corresponds to the thesis work. Some courses in 3.1.3(3) can also be selected if the topic of Seminar or Special Problem corresponds to the thesis work and this is approved by the program committee. 1.1.2.2 Other elective courses a minimum of 3 credits Select 3 credits freely from any field in 3.1.3(2) or from 3.1.3(3) or from the remaining required course in 3.1.3(1). Alternatively, a subject (of at least 3 credits) outside the program can be selected upon approval of the program committee. 1.2 Other courses None 2. Advanced Undergraduate Courses None B. Thesis 12 credits 254799 ME 799 Thesis 12 credits C. Non-credit Courses 1. Students may be required by the University and/or Graduate School to pass an English language proficiency test or otherwise register for improvement course(s). program requirements. 2. The Department may require students to register for selected course(s), at either graduate or under graduate level, outside the program as a condition for acceptance. program requirement. 3. Upon the thesis advisor s recommendation, students may be required to register for selected course(s), at either graduate or under graduate level, outside the program. program requirements and are not transferable. D. Academic Activities 1. Students are required to report progress once every semester, the schedule and format for which will be arranged by the Department. 2. Students must participate in academic activities arranged for them by the Department. Students who fail to meet the above requirements, will have to carry out some other academic activities set by the program committee or otherwise will not be granted a degree. 3.1.3 Course Work (1) Core courses 254700 Engineering Analysis 3(3-0-6)
254701 Mechanical Engineering Computation 3(3-0-6) 254702 Finite Element Method for Mechanical Engineering 3(3-0-6) 254710 Continuum Mechanics 3(3-0-6) (2) Fields of Specialization 2.1 Solid Mechanics and Materials 254711 Elasticity I 3 (3-0-6) 254712 Plate Theory 3 (3-0-6) 254713 Elastic Stability 3 (3-0-6) 254714 Metal Forming 3 (3-0-6) 254715 Light-Weight Structure Design 3 (3-0-6) 254803 Advanced Finite Element Method for Mechanical Engineering 3 (3-0-6) 254816 Mechanical Properties of Materials 3 (3-0-6) 254817 Macroscopic Mechanics of Composite Materials 3 (3-0-6) 254818 Material Selection in Mechanical Design 3 (3-0-6) 254819 Modeling of Nonlinear Materials 3 (3-0-6) 2.2 Field of Thermo-Fluids 254730 Heat and Mass Transfer Fundamental 3 (3-0-6) 254731 Advanced Heat Conduction 3 (3-0-6) 254732 Heat Convection 3 (3-0-6) 254733 Advanced Theory of Fluid Dynamics 3 (3-0-6) 254734 Advanced Engineering Thermodynamics 3 (3-0-6) 254735 Two-Phase Flow 3 (3-0-6) 254736 Boiling 3 (3-0-6) 254737 Advanced Heat Pipe 3 (3-0-6) 254738 Thermosyphon 3 (3-0-6) 254740 Advanced Refrigeration and Air-Conditioning 3 (3-0-6) 254741 Combustion Engineering 3 (3-0-6) 254742 Advanced Refrigeration 3 (3-0-6) 254743 Advanced Air-Conditioning 3 (3-0-6) 254744 Heat Transfer Equipments 3 (3-0-6) 254750 Intermediate Aerodynamics 3 (3-0-6) 254804 Computational Fluid Dynamics 3 (3-0-6) 254839 Viscous Laminar Flows 3 (3-0-6) 254842 Introduction to Aerosol Science and Technology 3 (3-0-6) 254851 Vacuum Technology and Ventilation Analysis 3 (3-0-6) 254852 Particulate Contamination and Introduction to Clean Room Technology 3 (3-0- 254857 Drying Engineering 3 (3-0-6) 2.3 Dynamics and Control 254721 Analytical Dynamics 3 (3-0-6) 254722 Oscillations in Linear Systems 3 (3-0-6) 254723 Continuous Dynamic Systems 3 (3-0-6) 254770 Mechanical Control Fundamentals 3 (3-0-6) 254771 Switching Control and Computer Interfacing 3 (3-0-6) 254773 Measurements 3 (3-0-6) 254824 Nonlinear System Dynamics and Control 3 (3-0-6) 254871 System Identification 3 (3-0-6) 254872 Optimum Control 3 (3-0-6) 254873 Digital Control of Mechanical System 3 (3-0-6) 254874 Rotating Machinery Dynamics 3 (3-0-6) 254875 Robot Dynamics and Control 3 (3-0-6)
254876 Control of Electromechanical Systems 3 (3-0-6) 254877 Adaptive Control 3 (3-0-6) (3) Seminar and Special Problem 254791 Seminar in Mechanical Engineering 1 3 (3-0-6) 254795 Special Topics 1 3 (3-0-6) 254891 Seminar in Mechanical Engineering 2 3 (3-0-6) 254895 Special Topics 2 3 (3-0-6) 4) Thesis 254798 Thesis 36 credits 254799 Thesis 12 credits Study Plan for A2 Year 1 Course work in 3.1.3(1) 9 Course work in 3.1.3(2) 3 Total 12 Course work in 3.1.3(2) and/or 3.1.3(1) and/or 3.1.3(3) 12 Proposal - Total 12 Year 2 254799 Thesis 6 Total 6 254799 Thesis 6
Thesis defense - Total 6