The Scientific Society of Measurement, Automation and Informatics (MATE) has the honour to invite you to the 19 th International Conference on Thermal Engineering and Thermogrammetry (THERMO) from the 7 th to 10 th of July, 2015 in Hungarian Academy of Sciences (MTA), Jacobin Hall,Castle of Buda, H-1014 Országház u.30.budapest; collaboration with the Budapest University of Technology and Economics(BME). Budapest, Hungary ABOUT THE CONFERENCE Since 1977 a successful series of Symposia has been organised by our Society every year. At the beginning these events were named "Symposium on Thermogrammetry" after a newly developed branch of thermal mapping methods which played a significant role in the program. As the scope of the symposia widened in 1982 they received the new name "Symposium on thermo-technical measurements". Due to the broad and increasing interest shown by the international thermal engineering and physician communities, in 1987 it was already organised as the International Conference on Thermal Engineering and Thermogrammetry (THERMO). This conference is a series of biennial meetings. The Conference is intended to be an event worthy of the attention of all engineers, scientists, physicians and researchers who are involved in the solution of thermal or energy related problems, as well as in the applications of thermal imaging. OBJECTIVES The developments of measurement theory and technologies help the energy- conscious design of thermal engineering equipment and processes as well as the better understanding of thermal phenomena in living organisms. The Conference will cover topics both the field of theory and application including new measurement concepts; transducer technique; thermal mapping; contact, optical and IR imaging; biomedical and biotechnological applications; thermal informatics, automatic methods and systems for industrial energy management and process control; heat loss detection and analysis; heat and mass transfer; utilization of alternative energy; thermophysical properties, potential uses of metering of alternative and energy efficient systems like cogeneration solar PVT, PVTC (solar photo-voltaic, heat and cooling), as well as the common practice of thermal engineering. This Conference will provide the latest information on the above topics together with a good opportunity for personal discussions among experts in the fields of energy conservation, control of energy release and loss, protection of human environment, recycling & reuse research, medical and veterinary applications, remote control through infrared sensors.
MAIN TOPICS The structure of the sessions will be fixed after receiving the papers, but the topics will cover the following fields: General thermal engineering; theory of measurements; thermal informatics, thermo-cad and its applications; advanced thermodinamics and the new tendencies associated: industrial energy management and process control systems; practice of thermal engineering; infra-red imaging science & technology: thermogrammetry, micro- and nanoscale thermal phenomena and sensing techniques, thermal defectometry; applied thermo-optics; thermophysical properties; heat and mass transfer; cooling of electronic components; heat exchangers; combustion; thermophysics of the environment; building services; environmental aspects of energy use; thermo-ergonomy and thermo-psychology; thermo diagnostics; system analysis in thermo-biology; IR-imaging in biomedical and bio-engineering applications; remote sensing through IR-imaging, multidisciplinary topics. TECHNICAL ISSUES The language of conference and abstracts is English. Together with oral presentation of papers a poster session will be organized. Duration of each presentation will be limited to 15 minutes and additional time for discussion will also be provided. The English translation of lectures not read in English should be submitted at the registration desk on the spot. LCD projector and computer with Windows OS for Microsoft Power Point format presentations is available. (Please note, that using your own computer is not allowed.) Those intending to attend the conference are kindly invited to send an Application & Registration Form to the address listed later, under "INFORMATION". EXHIBITION During the conference an exhibition of scientific and industrial instrumentation will be organised. Exhibitors from the field of temperature measurement and control, thermal properties, IR-imaging, anemometry, industrial energy control, heat loss detection equipment etc. are welcome. VENUE The conference is hosted by the Hungarian Academy of Sciences, located in the Royal Castle-Quarter of Buda. More information about the conference place and hotel accommodation will be sent after the arrival of the Application Form.. CALL FOR PAPERS The photocopy-ready papers(for CD-ROM presentation) of max. ten A4 format pages to be presented on the conference are to be submitted before 15 February, 2015. To assist the work of the Scientific Committee the authors are kindly requested to point out the aim, method and results of their work in the summary to be provided according to the typing instructions. Notification of the acceptance of abstracts will be forwarded to the authors until 30 December, 2014. The full text of all accepted papers will be included the CD-ROM Proceedings to be presented to the participants at the Conference.
THE CONFERENCE ORGANIZER: Branch of Thermal Engineering and Thermogrammetry (TE and TGM), Hungarian Society of Thermology (HST) at MATE, European Association of Thermology (EAT), SPONSORED BY: Budapest University of Technology and Economics (BME), Faculty of Mechanical Engineering (FME), HEXIUM Technical Development Co..Ltd.,Budapest,Hungary, GEA EGI Contracting/Engineering Co. Ltd., Budapest (EGI ZRt.), Siemens ZRt. Automation & Drives, Budapest,Hungary, evopro Innovation Kft. Budapest, Hungary, Hungarian Electrographic Art Association (HEAA), Magyar Elektrográfiai Társaság (MET), Budapest, Hungary, Hungarian Association of District Heating Enterprises,Budapest(MaTáSZSZ), Hungarian Chamber of Engineers, Budapest (HChE), Research and Development Company for the Combustion Technology,Miskolc (TÜKI ZRt.),Hungary, Frédéric Joliot-Curie National Research Institute for Radiobiology and Radiohygiene, Budapest (OSSKI), National Society for Medical Engineering,Budapest (MEDING). SCIENTIFIC COMMITTEE: Chairman: Dr. I. Benkő BME,FME,Hungary (EAT,HST,President of the TE and TGM), Secretary: I. Kovacsics, MSc. EGI-Contracting / Engineering Co.Ltd.,Budapest, Hungary (HST, TE and TGM). Members: Dr. K. Ammer LBF für Phys. Diag., Wien, Austria (EAT) Pres. A Balogh EGI-Contracting/Engineering Co. Ltd., Budapest, Hungary Pres. Ms. Á. HAász Hungarian Electrographic Art Association (HEAA),Budapest Dr. L. Bánhidi BME,FME, Prof. Emeritus of BS & PE, Budapest, Hungary Dr. A.Bejan Duke University, Durham, USA B.Bodnár Secr.Gen. of MATE, Managing Director, evopro Innovation Kft. Budapest,Hungary Prof.G.Cardone University of Naples Frederico II, DIAS,Naples.Italy Prof.C.Corsi Alenia CREO,Roma,Italy Prof. A. Çan University of Trakya, Edirne, Turkey Prof.G.Descombes CNAM, Lab.de Turbomachine, Paris,France Prof.G.Cuccurullo Mech.Engineering Dpt.,Univ.of Salerno,Fisciano(SA),Italy Prof. I. Dinçer Univ. of Ontario, Inst. of Technology, Oshawa, Canada Dr.H. El Qarnia Cad Ayyad Univ. Fac.of Sci.Semlalia, Marrakech-Morocco
Prof. Gh.Popescu Univ.POLITEHNICA of Bucharest,Fac.of Mech.Engng.and Mechatronics, Romania Prof.S.R.Gollahalli Lesch Centennial Chair Professor,School of Aerospace and Mechanical Engineering, University of Oklahoma, USA Prof.A.Gungor Ege University,Bornova,Izmir,Turkey Prof.M.Feidt Univ. Lorraine, LEMTA, Vandoeuvre, France Dr. A.Galovic FSB, University of Zagreb, Zagreb, Croatia Dr. L. Garbai BME,FME, Professor of BS & PE, Budapest, Hungary Dr.Gy.Gróf BME,FME,Head.of the DEE,Budapest,Hungary Prof.F.Hamdullahpur University of Waterloo, Waterloo, Ontario,Canada Prof.G.P.Hammond Dpt.of Mech.Eng.,Fac.of Eng.& Design,Univ.of Bath,Bath,U.K. Prof.A.Hepbasli Professor & Chairman,Dept.of Energy Systems Engineering, Faculty of Engineering, Yasar Univ. Bornova, Izmir,Turkey Dr. A. Jung Military Medical Inst., Warsaw, Poland (EAT) Dr. L. Kajtár BME,FME, Assoc.Professor of BS & PE, Budapest, Hungary Prof.Dr.B.I.Kilkis Baskent University,Ankara,Turkey Prof.S.C.Kaushik Centre for Energy Studies I.I.T.,Hauz-Khas,New Delhi, India Dr.L.I.Kiss Professor, Dpt.of Appl.Sci.,Univ.Research Group GRIPS,Univ. of Québec in Chicoutimi, Canada Prof.G.Kocar Director of Solar Energy Inst.,Ege Univ.,Bornova,Izmir,Turkey Prof.Ch.J.Koroneos Aristotle University of Thessaloniki,Thessaloniki,Greece Dir. I. Kovács Vice President of HChE, Budapest, Hungary Dr. G. J. Köteles OSSKI, Professor, Budapest, Hungary (HST) Dr.Xianguo Li Faculty of Engng.,Univ.of Waterloo,Ontario, Canada Dr. L. Ludvig Pres. of MATE, Managing Director, Siemens ZRt., Budapest,Hungary Dr. X. Maldague University Laval, Québec city, Canada (QIRT) Dr.J.B.Mercer Pres.EAT.,Fac. Med.,Univ.of Tromsoe,Tromsoe,Norway Prof. J.Gabriel Faculty of Engineering,University of Porto,Portugal Prof. A. Midilli Recept Tayyip Erdogan University, Faculty.of Engine, Rize, Turkey Dr.T.Nagy Director of HEXIUM Co.Ltd.,Budapest,Hungary Cs.P.Nagy President of MEDING. Budapest, Hungary Dr. M. Osztheimer VEIKI Energia+ Kft., Budapest, Hungary Dr.H.K.Ozturk Pamukkale University, Kinikli-Denizli,Turkey Prof.Dr.G.Péceli Rector of the BME,Budapest,Hungary P.Podevin Ing.de Rech. CNAM, Lab.de Turbomachine, Paris,France Dr. A.H.Reis University of Evora, Evora, Portugal Prof.E.F.J. Ring,DSc Director Medical Imaging Rechearch Unit,Faculty of Advanced Technology, University of Glamorgan, Pontypridd, U.K. (EAT) Prof.S.Sahin Mech.& Nucl. Engineering,ATILIM Univ.,Ankara,Turkey Dr. M. Sevcsik Director Gen. TÜKI ZRt., Miskolc, Hungary Dr. S. Švaic FSB, University of Zagreb, Zagreb, Croatia (QIRT) Cs.Fekete President of MaTáSZSZ, Budapest,Hungary Dr.Hisashi Usuki Chief Dir.JST,Dir.Surgical C er Kagawa Univ.,Miki,Japan
Prof.S.Yaman Istanbul Techn.Univ.,Chemical & Metallurgical Fac., Maslak,Istanbul, Turkey Dr.R.Vardasca Faculty of Engineering,University of Porto,Portugal Dr. B. Wiecek Technical University of Lodz, Lodz, Poland (QIRT) Scientific Society of Measurement, Automation and Informatics (MATE) Branch of Thermal Engineering and Thermogrammetry (TE and TGM) Méréstechnikai, Automatizálási és Informatikai Tudományos Egyesület (MATE) Hőtechnikai és Termogrammetriai (HT és TGM) Szakosztály MATE Secretariat: H-1372 Budapest, POB. 451., Hungary Bay Z.Innovációs Park, 1116 Budapest, Fehérvári út 130. fsz.23. Phone: +361-310-0999,+361-343-7293, Fax: +361-353-1406, e-mail: ibenko@freestart.hu, mate@mate-net.hu, www.mate-net.hu THERMO-BRIDGE between East and West for technology transfer and information exchange 19 TH INTERNATIONAL CONFERENCE on THERMAL ENGINEERING AND THERMOGRAMMETRY (THERMO) with Exhibition and Pre-Session on Thermal Energy in Hungarian Typing instructions for Papers of the 19 th International THERMO Conference The papers should comply with the following structure (Font style and size of individual items are indicated in brackets. The font type should be Univers/ Arial/ Helvetica.) Deadline: Papers should arrive before 15 February, 2015. Title of the paper (Bold, 18 points, directly at top of page) [Please leave two blank lines here] Author's name (degree, title) (Bold capitals, 12 points, aligned to right) (The name of the author/coauthor who presents the paper should be underlined) Author's affiliation (institution) (Italics, 12 points) Mailing address (city, street address, country, ZIP code)(normal, 12 points) [Please leave three blank lines here] SUMMARY (Bold, 10 points) A short summary of about six lines. (Normal, 10 points)
Text of the papers starts here. The papers should provide the following information: purpose of the study, the methods used, summary of the results and conclusions. Authors are requested to emphasize the novelties in their work. (Normal, 12 points. Subheadings should be in bold.) The text should be typed on A4 size and completely fill the 16.5 x 25 cm typing area (top/bottom margins: 2/2.8 cm, left/right margins: 2.5/2 cm). The papers should not exceed ten pages. They must be typed in English, with single line spacing. One blank line shoud be left between paragraphs. For headings and subheadings international numbering should be used (e.g. 1., 1.1., 1.1.1.). Paragraphs must be indented with three spaces. The contact details should appear at the end of the paper according to the sample below: Contact details:prof. Dr. Imre BENKÖ, Budapest University of Technology and Economics (BME), Faculty of Mechanical Engineering, H-1521 Budapest, Muegyetem rkp. 7 / D. Build.. Hungary, Phone/fax: +361-310-0999. E-mail: ibenko@freestart.hu INFORMATION Application & Registration Forms and abstracts/papers should be sent to: Dr. Imre BENKŐ, MATE Secretariat, E-mail: ibenko@freestart.hu For any further information and personal inquiries please contact the following address: Dr. Imre BENKÖ, H-1112 Budapest, Cirmos u. 1, 6/38, Hungary Phone/fax: +361-310-0999. E-mail: ibenko@freestart.hu Please send further copies of First Announcement to the following addresses: P.S.: The organizers strongly recommend Internet exhange: e-mail for abstract to: ibenko@freestart.hu Authors are requested to provide electronic version of their abstract (two pages, A4 format for printed Volume) as.doc (and not docx) attached file to: ibenko@freestart.hu I am looking forward to meet you in Budapest. On behalf of the Organizing Committee, I remain yours sincerely Budapest, September, 2014 Dr. I. BENKŐ, Chairman Scientific Society of Measurement, Automation and Informatics (MATE) Branch of Thermal Engineering and Thermogrammetry (TE and TGM) Méréstechnikai, Automatizálási és Informatikai Tudományos Egyesület (MATE)
Hőtechnikai és Termogrammetriai (HT és TGM) Szakosztály MATE Secretariat: H-1372 Budapest, POB. 451., Hungary Bay Z.Innovációs Park, 1116 Budapest, Fehérvári út 130. fsz.23. Phone: +361-310-0999,+361-343-7293, Fax: +361-353-1406, e-mail: ibenko@freestart.hu, mate@mate-net.hu, www.mate-net.hu THERMO-BRIDGE between East and West for technology transfer and information exchange 19 TH INTERNATIONAL CONFERENCE on THERMAL ENGINEERING AND THERMOGRAMMETRY (THERMO) with Exhibition and Pre-Session on Thermal Energy in Hungarian