CH140 RH124 CH180 RH164 CH240 RS44 DH140 RS46 DH140T RS84 DH180 RS86 DH240 DH240T EP104 EP154 EX101 EX101E EX104 EX154 EX104 EX154 RH124 RH164 RS44 RS46 RS84 RS86 CM120 CS20 DM110 DM160 DS10 DS60 CS50 DF50 DF80 DF85 RX530 RX550 RX570 RZ50 June, 2010 IMA003V1.3 CS10 CS11 DF40 DF70 P1 P5 RZ25 CS3 RZ30 Z20 1
C O N T E N T S 1. Features 3... 2. Benefits 4... 3. Notes 4... 3.1. User Access Rights 4... 3.2. Camera s FTP Server Access Rights 4... 3.3. Maximum number of connections 4... 4. CGI command / Syntax 5... 4.1. Setting Command 5... 4.1.1. FTP Server Setting 5... 4.1.2. User Setting 6... 4.2. Inquiry Command 7... 5. Applicable Models 8... 2
1. Features Users can access to recorded image files via Client PC, if the FTP Server function is activated. Recording can be triggered with an alarm, such as Sensor IN and camera side motion detection, by using FTP Client function * a. Users can record still image and video into the storage media which was installed to camera, by using the Local Storage (Image Memory) * b function. Image files (only still JPEG image) can be sent by e-mail using SMTP * c function. [System image] IP network camera Recorded files... CF card... Mobile SMTP server FTP server Client PC *a) The FTP Client function is a camera function that can be used via the camera setup menu. For details, please refer to FTP Client Function Application Guide. *b) The Local Storage (Image Memory) is a camera function that can be used via the camera setup menu. For details, please refer to Local Storage Application Guide. *c) The SMTP function is a camera function that can be set via the camera setup menu. For the details, please refer to SMTP Function Application Guide. 3
2. Benefits In conjunction with the FTP Client function and Local Storage function, users can enjoy the following benefits: 1) Backup for recording server: When a recording server cannot retrieve and record video images, such as when the network or system fails, the local storage feature can be used to store video in the storage media. 2) Reduce the network load during business hours: If video images are stored only in the local storage media during business hours and retrieved from the media using a server or Client PC during off hours, network bandwidth can be used more efficiently. Notes 3. 3.1. User Access Rights To use this function, set your authentication level to administrator unless otherwise noted. 3.2. Camera s FTP Server Access Rights To log in to the camera s FTP server, make sure to select the FTP check box in the User menu for the corresponding user. The administrator can always log in to the camera s FTP server. Notes: (For SNC-CS10/CS11/DF40/DF70/P1/P5/RZ25) To log in to the camera s FTP server, make sure to select the FTP User check box in the User menu for the corresponding user. (SNC-RZ50 Screenshot) (For SNC-CS3/RZ30/Z20) To log in to the camera s FTP server, user registration is required in addition to the camera s user setting. For details on how to register, refer to the 4.1.2. User Setting section. 3.3. Maximum number of connections Up to five network cameras can be connected to the FTP server at a time. Note: With regard to SNC-CS3/RZ30/Z20, up to ten cameras can be connected. 4
4. CGI Command/Syntax 4.1. Setting Command 4.1.1. FTP Server Setting All Applicable Models CGI Parameter Value Description ftpserver.cgi FtpServerFunc FsRootDir (*1) on off builtin a-slot b-slot ata-a Activates the FTP server function. Notes: The frame rate and operability on the main sviewerpage may decrease when the FTP server function is used. Deactivates the FTP server function before the memory card or other items inserted in the A-slot/B-slot are removed, or before the power of the camera is turned OFF with the memory card inserted. Deactivates the FTP server function. Select when the built-in memory of the camera contains files you want to download. Note: SNC-CS3/CS10/CS11/DF40/DF70/P1 is NOT equipped with a built-in memory. CH140/CH180/CH240/P5/RH124/RH164/RS44/RS46/ RS84/RS86/RZ25: Select when the CF memory card inserted in the A-slot Note: (For SNC-CH180/RH124/RS44/RS46) With the PoE function, this value becomes invalid if set. EX101/EX104: Select when the USB memory device inserted in the A-slot CS50/RX530/RX550/RX570/RZ50: Select when the ATA memory card inserted in the A-slot RX530/RX550/RX570: Select when the Memory Stick inserted in the B-slot DF80/DF85/RZ50: Select when the CF memory card inserted in the B-slot RZ30/Z20: Select when the ATA memory card inserted in the A-slot ata-b RZ30: Select when the ATA memory card inserted in the B-slot 5
*1: Logical Slot/Physical Slot table RX530/ 550/570 CS50 RZ50 DF50 DF80 /85 Physical Slot *See below EX101/ 104 RZ30 Z20 Other builtin Built-in memory (18 MB) Built-in memory (8 MB) Logical Slot a-slot (ata-a) b-slot (ata-b) Memory Stick PCMCIA N/A Compact Flash USB Memory PCMCIA N/A Compact Compact PCM N/A N/A N/A N/A N/A N/A Flash Flash CIA * SNC-CH140/CH180/CH240/P5/RH124/RH164/RS44/RS46/RS84/RS86/RZ25 CGI Syntax: http://ip_adr/command/ftpserver.cgi?ftpserverfunc=value http://ip_adr/command/ftpserver.cgi?fsrootdir=value 4.1.2. User Setting CS3 RZ30 Z20 CGI Parameter Value Description ftpserver.cgi FsUserPass1 FsUserPass2 FsUserPass3 FsUserPass4 FsUserPass5 FsUserPass6 FsUserPass7 FsUserPass8 FsUserPass9 FsUserPass10 You can register up to 10 user names and passwords to allow login to the camera using the FTP client software of the computer. Note: User names and passwords can be set to between 4 and 16 characters. CGI Syntax: http://ip_adr/command/ftpserver.cgi?fsuserpassn=value, value 6
4.2. Inquiry Command All Applicable Models Notes: For SNC-CS3/RZ30/Z20: Level4 users, as well as administrators, can use this command. For a description of each parameter, refer to the 4.1. Setting Command section. CGI Syntax:1 For cameras other than SNC-CS3/RZ30/Z20: http://192.168.0.100/command/inquiry.cgi?inq=ftpserver Return Value: FtpServerFunc=on&FsRootDir=builtin For SNC-CS3/RZ30/Z20: http://192.168.0.100/command/inquiry.cgi?inq=ftpuser Return Value: FsUserPass1=admin,admin&FsUserPass2=,&FsUserPass3=,&FsUserPass4=... CGI Syntax:2 For cameras other than SNC-CS3/RZ30/Z20: http://192.168.0.100/command/inquiry.cgi?inqjs=ftpserver Return Values: var FtpServerFunc="on" var FsRootDir="builtin" For SNC-CS3/RZ30/Z20: http://192.168.0.100/command/inquiry.cgi?inqjs=ftpuser Return Values: var FsUserPass1="admin,admin" var FsUserPass2="," var FsUserPass3="," var FsUserPass4="," : 7
5. Applicable Models SNC-CH140 SNC-CH180 SNC-CH240 SNC-CM120 SNC-CS3N/CS3P SNC-CS10/CS11 SNC-CS20 SNC-CS50N/CS50P SNC-DF40N/DF40P SNC-DF50N/DF50P SNC-DF70N/DF70P SNC-DF80N/DF80P SNC-DF85N/DF85P SNC-DH140/DH140T SNC-DH180 SNC-DH240/DH240T SNC-DM110 SNC-DM160 SNC-DS10 SNC-DS60 SNC-P1/P5 SNC-RH124 SNC-RH164 SNC-RS44N/RS44P SNC-RS46N/RS46P SNC-RS84N/RS84P SNC-RS86N/RS86P SNC-RX530N/RX530P SNC-RX550N/RX550P SNC-RX570N/RX570P SNC-RZ25N/RZ25P SNC-RZ30N/RZ30P SNC-RZ50N/RZ50P SNC-Z20N/Z20P SNT-EP104/EP154 SNT-EX101/EX101E/EX104/EX154 8