ALD Atomic Layer Deposition



Similar documents
Optical Properties of Sputtered Tantalum Nitride Films Determined by Spectroscopic Ellipsometry

Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive. Wolfgang Hentsch, Dr. Reinhard Fendler. FHR Anlagenbau GmbH

Chapter 7-1. Definition of ALD

2. Deposition process

WŝŽŶĞĞƌŝŶŐ > ĞdžƉĞƌŝĞŶĐĞ ƐŝŶĐĞ ϭϵϳϰ WŝĐŽƐƵŶ ^he > Ρ ZͲƐĞƌŝĞƐ > ƐLJƐƚĞŵƐ ƌŝěőŝŷő ƚśğ ŐĂƉ ďğƚǁğğŷ ƌğɛğăƌđś ĂŶĚ ƉƌŽĚƵĐƟŽŶ d, &hdhz K& d,/e &/>D /^, Z

FRAUNHOFER INSTITUTe For

OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS

CIRICULUM VITAE 1. PERSONAL. Date of Birth-Place : March 2 nd Balikesir, Turkey

Plasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology

h e l p s y o u C O N T R O L

histaris Inline Sputtering Systems

Ion Beam Sputtering: Practical Applications to Electron Microscopy

High performance. Architectural glazings utilise thin. low-emissivity coating. Coating technology

The study of structural and optical properties of TiO 2 :Tb thin films

Introduction to Thin Film Technology LOT. Chair of Surface and Materials Technology

Picosun World Forum, Espoo years of ALD. Tuomo Suntola, Picosun Oy. Tuomo Suntola, Picosun Oy

Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray

USING OPTICAL EMISSION SPECTROSCOPY TO IMPROVE EQUIPMENT UPTIME FOR AN AL2O3 ALD PROCESS *

Combustion chemical vapor deposition

ALD from Lab to Fab Atom Level Control for Industrial Thin Films Kokkola Material Week September 23, 2014

Coating Technology: Evaporation Vs Sputtering

Results Overview Wafer Edge Film Removal using Laser

State of the art in reactive magnetron sputtering

High Rate Oxide Deposition onto Web by Reactive Sputtering from Rotatable Magnetrons

Super Cool Sputter Coater

Pulsed laser deposition of organic materials

THIN FILM MATERIALS TECHNOLOGY

Coating Thickness and Composition Analysis by Micro-EDXRF

For Touch Panel and LCD Sputtering/PECVD/ Wet Processing

AC coupled pitch adapters for silicon strip detectors

Scanning Electron Microscopy Services for Pharmaceutical Manufacturers

Adhesive bonding technology. Adhesive bonding in transportation construction. Intelligent solutions for transportation construction

Light management for photovoltaics using surface nanostructures

G8 GALILEO. Innovation with Integrity. High-End Melt-extraction Analyzer. Inert Gas Method

Sputtering Targets and Sputtered Films: Technology and Markets

SILA Sistema Integrato di Laboratori per l Ambiente. CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa

Optical Properties of Thin Film Molecular Mixtures

Nanometer-scale imaging and metrology, nano-fabrication with the Orion Helium Ion Microscope

A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators

BIOACTIVE COATINGS ON 316L STAINLESS STEEL IMPLANTS

Dr Marcin Adamiak marcin.adamiak.

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia

Demonstration of sub-4 nm nanoimprint lithography using a template fabricated by helium ion beam lithography

Thin film structures of diamond-like carbon prepared by pulsed plasma techniques 325. Publications

Keywords: Planar waveguides, sol-gel technology, transmission electron microscopy

CHAPTER 2 EXPERIMENTAL. g/mol, Sigma-Aldrich, Germany Magnesium acetate tetrahydrate (C 4 H 6 MgO. 4 4H 2 O), assay 99.0%,

Nanoscience Course Descriptions

Improved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process

The New PVD HI3-Technology: Latest Developments and Potential for Coining Dies.

Deposition Overview for Microsytems

Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014

Testing and characterization of anti-reflection coatings on glass

How To Make A Plasma Control System

NANOSTRUCTURED ZnO AND ZAO TRANSPARENT THIN FILMS BY SPUTTERING SURFACE CHARACTERIZATION

Chemical reactions allow living things to grow, develop, reproduce, and adapt.

Decorative vacuum coating technologies Certottica Longarone. Thin Film Plasma Coating Technologies

Laser beam sintering of coatings and structures

MILESTONE H E L P I N G C H E M I S T S

Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

Phase Characterization of TiO 2 Powder by XRD and TEM

Reactive Sputtering Using a Dual-Anode Magnetron System

Projects and R&D activities

XFA 600 Thermal Diffusivity Thermal Conductivity

Dependence of the thickness and composition of the HfO 2 /Si interface layer on annealing

Name Date Class CHAPTER 1 REVIEW. Answer the following questions in the space provided.

Tecnologie convenzionali nell approccio top-down; I: metodi e problematiche per la deposizione di film sottili

Investigation of the Optical Properties of Liquid Deposition CuSO 4 Thin Film

Active Nanocomposite Materials

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.

Potassium Aluminium Silicate (Mica) Chemical and Technical Assessment (CTA) Prepared by Daniel E. Folmer, Ph.D., and reviewed by Madduri V. Rao, Ph.D.

Usage of Carbon Nanotubes in Scanning Probe Microscopes as Probe. Keywords: Carbon Nanotube, Scanning Probe Microscope

Laser Based Micro and Nanoscale Manufacturing and Materials Processing

T. Suntola: 30 years of ALD ALD 2004, Aug , 2004, University of Helsinki, Finland. 30 years of ALD Tuomo Suntola

Production of ferrite nanopowders in radiofrequency thermal plasma

Sputtered AlN Thin Films on Si and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties

EXPERIMENTAL STUDY OF STRUCTURAL ZONE MODEL FOR COMPOSITE THIN FILMS IN MAGNETIC RECORDING MEDIA APPLICATION

Dew-Point Measurement Solutions

BET Surface Area Analysis of Nanoparticles

Microhardness study of Ti(C, N) films deposited on S-316 by the Hallow Cathode Discharge Gun

Polymer growth rate in a wire chamber with oxygen, water, or alcohol gas additives

Introduction to VLSI Fabrication Technologies. Emanuele Baravelli

Exploring the deposition of oxides on silicon for photovoltaic cells by pulsed laser deposition

Modification of Pd-H 2 and Pd-D 2 thin films processed by He-Ne laser

Warranty. 1/5. Warranty

SolCalor B.V. is officiel Benelux Service Center of SRB-Energy. Marktstraat 23, 5701 RM, Helmond, The Netherlands. Tel: +31-(0) Website:

Facility Rates & Expense Caps

M I C R O W A V E O P E N V E S S E L D I G E S T I O N S Y S T E M T HE NEW MIL E STO NE MILESTONE

GREEN NANOTECHNOLOGY. Geoffrey. Energy in the Built Environment. Solutions for Sustainability and. B. Smith Claes G. Granqvist.

Leica EM SCD500. High Vacuum Sputter Coater For Highest Resolution FE-SEM Analysis

Photolithography. Class: Figure Various ways in which dust particles can interfere with photomask patterns.

Good Boards = Results

Simultaneous data fitting in ARXPS

Pre-treatment of Aluminium Surfaces Architect Information Surface Finishes. Status

AMD AXDA3000DKV4D Athlon TM XP Microprocessor Structural Analysis

Dry Etching and Reactive Ion Etching (RIE)

Transcription:

Research - Services ALD Atomic Layer Deposition Atomic Layer Deposition is a deposition process for assembling of thin films on the nanometer scale. The self-limiting deposition of atomic monolayers occurs trough a cyclic injection of volatile and highly reactive precursors. The several gases are induced alternately into the process chamber and are separated by a purge pulse respectively. Advantages of the ALD-coating: deposition of homogenous coatings on any formed substrate accurate film thickness monitoring defined layer composition high layer quality Home News Staff Services Equipment

News Current Research: ALD Internal Coating of X-ray Optics The rapid development both in nanotechnology and photovoltaics leads to new standards for more accurate spatial resolutions in X-ray analytics. Single capillary optics and X-ray micro-mirrors are of particular interest. Funded by the European Union and the Free State of Saxony Workshops & Conferences Fischer D., Eschner M., Glühmann J., Lorenz C, Neidhardt A, Reinhold C., Reinhold U., Schnabel H.-D., Schneeweiß M., Protective Layer on Indexable Inserts, DPG Frühjahrstagung der Sektion Kondensierte Materie (SKM) 76. Jahrestagung der DPG, Berlin, Germany, March 2012 Lorenz C., Schenk T., Fischer D., Eschner M., Neidhardt A., Reinhold C., Reinhold U., Schnabel H.-D., ALD Process for Tungsten Films in Model-like Glass Capillaries, ALD-AVS & Baltic-ALD conference 2012, Dresden, Germany, June 2012 C. Lorenz, M. Neuber, A. Neidhardt, C. Reinhold, U. Reinhold, H.-D. Schnabel Adhesion Strength of Low Temperature Tungsten ALD-Films, 13th International Conference on Atomic Layer Deposition, San Diego, July 2013 Home News Staff Services Equipment

Staff Professors (from left to right) Prof. Dr. rer. nat. habil. Andreas Neidhardt Tel: (0375)536 1507 E-Mail: andreas.neidhardt@fh-zwickau.de Prof. Dr. rer. nat. Ullrich Reinhold Tel: (0375)536 1508 E-mail: ullrich.reinhold@fh-zwickau.de Prof. Dr. rer. nat. Christel Reinhold Tel: (0375)536 1500 E-mail: christel.reinhold@fh-zwickau.de Prof. Dr. Ing. Hans-Dieter Schnabel Tel: (0375) 536 1530 E-Mail: hans.dieter.schnabel@fh-zwickau.de Fax: (0375) 536 1503 Co-workers: Dipl.-Ing. (FH)Mario Eschner Home News Staff Services Equipment

Services Producible films: Aluminium oxide (Al 2 O 3 ) Titanium aluminium nitride (Ti(Al)N) Titanium nitride (TiN) Titanium oxide (TiO 2 ) Metallic tungsten (W) Both thermal and the plasma enhanced ALD (PEALD) processes allow the deposition of coatings ranging between 1 and 100 nm on a variety of substrates (e.g. metals, glasses). The precision of the high-grade coatings with self-limiting growth is implemented through multi-stage, cyclic processes. The deposition process of insulating or conducting thin films on complex, 3D and large-scale structures improves the surface properties and advances the further miniaturization of components in the field of nanotechnology. Other coating equipment at the WHZ: Cavity magnetron coating system Hollow-cathode arc coating system Plasma-enhanced chemical vapour deposition system Home News Staff Services Equipment

Equipment Laboratory equipment with modern technology which is compliant with the safety instructions The ALD system, which started up in 2011, consists of: System (process chamber with merchant system) Vacuum pump Dry bed absorber Switchboard Gas control unit for liquid and gaseous precursors Measurement and testing equipment to characterize thin films: Spectral ellipsometer SE800 (SENTECH) Analysis system (UHV-STM, XPS, UPS) (SPECS) Scanning electron microscope (SEM) with quantitative EDX analysis MIRA FE-REM (TESCAN) X-ray diffractometer (XRD) D8 Discover with GADDS (Bruker) Scratch tester from home development Home News Staff Services Equipment

Protective Layer Back To News

Glass Capillaries Back To News

Adhesion Strength Back To News

First results are presented at the 12 th international conference on Atomic Layer Deposition (ALD) International researcher/scientist, specialists and 29 exhibitors came to AVS Topical Conference on Atomic Layer Deposition (ALD 2012) from 17 to 20 June 2012 in Dresden. The conference supported by the American Vacuum Society takes place once a year alternately in America, Asia or Europe. This year the conference was assisted by 21 sponsors and was organized by NaMLab ggmbh in Dresden. The AVS Topical Conference on Atomic Layer Deposition was dedicated to the science and technology of atomic layer controlled deposition of thin films. Atomic layer deposition (ALD) is used to fabricate ultrathin and conformal thin film structures for many semiconductor and thin film device applications. A unique attribute of ALD is the sequential self-limiting surface reaction to achieve control of film growth in the monolayer or sub-monolayer thickness regime. ALD is receiving attention for its potential applications from advanced electronics, microsystems, display manufacturing, energy capture and storage technologies, solid state lighting, biotechnology, security, and consumer products - particularly for any advanced technologies that require control of film structure in the nanometer or sub-nanometer scale. The process and its application is an important main research topic for the Saxon research facilities, which were joined to become ALD Lab Dresden. Since that time the ALD principles are applied in the semi-conductor industry in Saxony and the Saxon equipment-industry offers tailored process plants and research facilities. Poster Back to News

International ALD Conference 2013 in San Diego Already the thirteenth time, scientists and research groups from the industry and academic research field met to exchange insights of their research on the annual international conference of Atomic Layer Deposition. This year, the conference took place in the gorgeous ambience of San Diego from the 28 th to the 31 st of July. The Atomic Layer Deposition is a technique that is used for the production of ultra-thin films. A very important feature is the self-limiting reaction of the precursors (gaseous compounds that take part in the reaction) on the surface of the substrate, leading to a step by step growth (in monolayers) of the compound. This way, thin films can be deposited precisely and reproducible. Despite the many benefits and its high potential, the Atomic Layer Deposition is still not very much common in industrial applications. Therefore, this year s conference was focused on the industrialization of the ALD. Markus Neuber presents a poster of the ALD research group of the UAS Zwickau and answers questions of the interested audience. The University of Applied Sciences (UAS) Zwickau was also involved in this exchange of knowledge. It was represented by Professor Hans-Dieter Schnabel, the current head of the ALD research group at the UAS Zwickau, and Markus Neuber, a master student who is doing an internship abroad. They showed the results of their research with the topic Adhesion Strength of Low Temperature Tungsten ALD-Films and answered the questions of the audience. A lot of them had suggestions that will be considered in the further work of research in Zwickau. Furthermore, ideas for more projects with pioneering character were gathered. That is because the ALD gains more and more influence in research and industry. Next year the international ALD conference be held in Osaka (Japan). Hopefully again with a contribution of the UAS Zwickau. Especially the lunch time was used to establish contacts and to discuss different results and presentations. Poster Back to News