High Security Heavy Duty Shredders VZ Perfect shredding and high performance in DIN security levels 4 and 5

Transcription

1 High Security Heavy Duty Shredders Perfect shredding and high performance in DIN security levels 4 and 5 Documentation High Security Heavy Duty Shredders / Page 1of 5

2 Perfect shredding and high performance. The large high security shredders /4 and /5 have proven themselves for over 10 years for the destruction of large quantities of data with high and maximum security requirements. The machine is easily loaded via the generously sized loading table with integrated conveyor belt. Pre-shredding The shredded material from the primary shredder 6 x 50 mm particles falls onto a conveyor belt and is transported directly to the cutting shafts of the security shredder. Only the combination of primary and security shredder enables such a large throughput at high security levels. Execution /4: 2 x 15 mm Security Shredder The 2 x 15 mm cutter guarantees security level 4 as per DIN Thanks to the subsequent compaction of the fine particles in the integrated bale press, even the requirements for security level 5 are met. Execution /5: 2 x 4.5 mm Security Shredder The security shredder with 2 x 4.5 mm particle size enables compliance with security level 5 as per DIN Thanks to the subsequent compaction of the particles, the requirements of security level 5 are even exceeded. Documentation High Security Heavy Duty Shredders / Page 2 of 5

3 Efficient, thermally protected gear motors ( kw motor output) and robust drive Optimum cutting performance thanks to robust, low-wear blade shafts made of galvanised special steel Working width: 500 mm; suitable for the most common EDP formats Professional solution Automatic control of primary and security shredder Parallel operation of shredder and press Electronic fill level monitoring of the press chamber Automatic triggering of the press cycle Shredder can still be loaded during this process Visual signal of the message Bale ready and simultaneous interruption of the cutting process Integrated automatic oiler for the security shredder Optimum handling Push-button bale ejection Compact bales Ejection into collection bag for low-dust, clean transport as well as packaging protected from the elements Advantageous Sturdy bales and low-dust handling Standard safety equipment Wide EMERGENCY-STOP bar on feed table for immediate machine stop in the event of danger Lockable master switch and key-operated switch Safety switch on the service door of the security shredder for machine stop when the door is opened Overload protection in transfer area between shredder and press Safety switch on the loading door of the press Safety lock on the bale ejection door Safety switch for machine standstill in the event of missing or moved press Motor protection via thermal sensor and overcurrent protection relay Practical additional benefit Separate insertion slot to reduce volume of small cardboard boxes in the pressing chamber Practical extension: dust extractor Prepared as standard for connection of a dust extractor Significant improvement in room climate and working conditions Space-saving, mobile positioning next to the shredder Documentation High Security Heavy Duty Shredders / Page 3 of 5

4 Perfect, easy operation Lockable main switch to protect against unauthorised use Selection switch for manual/automatic operation Clear, robust buttons for On / Off and Reverse on both cutters Visual operating status displays for both cutters and the press Trouble-free operation All machine functions controlled via programmable logic control (PLC) Automatic reverse for both cutters with subsequent restart in the event of overload Fully automatic control of the complete system in automatic mode Unique feed technology Integrated conveyor belt transports the material to the primary shredder shredder Both cutting units easily accessible for maintenance Optimum all-round safety Comprehensive safety equipment at all important operating points to protect operator and machine Transport Packaging Packed in a wooden crate Dimensions L x W x H Shredder 2,490 x 1,360 x 1,730 mm Baler 2,260 x 980 x 940 mm Weight with packaging 1,580 kg /4 /5 Security Level DIN Level 4 DIN Level 5 Size of Shreds mm 2 x 15 2 x 4.5 Shredding Capacity 1 Sheets Shredding Capacity 2 kg/h Cutting Speed approx. m/sec 0.24 Working Width approx. mm 500 Press Force approx. kn 80 Bale Weight 3 kg Noise Level dba 74 Power Supply Volt 400 / 3ph Motor Power kw 11.3 (4 kw Pre-Shredder kw Post-Shredder + 4 kw Baler) Dimensions L x B x H mm 3,030 (with bale-ejection flap open 3,660) x 1,200 x 1,670 Weight kg 1,370 1 based on 70 g/m 2 A4 paper. Sheet capacities vary depending on quality, weight, grain of paper and sufficient power supply. It may be lower if the voltage is below the rated/nominal value. 2 depending on feeding, material and power supply, with cutters in mint condition 3 depending on material and cutting width Documentation High Security Heavy Duty Shredders / Page 4 of 5

5 Installation instructions intimus /4 und /5 High Security Heavy Duty Shredders Scale 1:40 Shredder: Operator s position [2] Dimensions mm [1] Length 3,030 [2] Length with bale ejection flap open 3,660 [3] Height 1,670 [4] Inlet height or desk height 1,305 [5] Width 1,200 [1] [3] Baling press: Operator s position Required space / distances mm [1] min. 600 [3] min. 800 [2] min. 1,000 [4] min. 1,200 Position of controls Power Supply 3 Phase - Power lead = 5.10 m V / 50 Hz supplied with Cekon CEE 32 A plug, 5-pin - other voltages on request [4] Required Fusing by customer - Circuit breaker with tripping characteristic C - or fuse gl/gg Classification type 1 as per IEC/EN V / 50 Hz = 35 A slow blow V / Hz = 40 A slow blow 200 V / Hz = 63 A slow blow [4] [3] [1] [5] [2] Documentation High Security Heavy Duty Shredders / Page 5 of 5