: EUROPE, ASIA, AFRICA, AMERICA

Transcription

1 TEST REPORT Page 1 of 5 TEST REPORT NUMBER : TURR DATE: 21 February, 2013 APPLICANT: Emta Kablo San.ve Tic.A.Ş. ADDRESS: Kadirli O.S.B. 1. Cd. No:15 Kadirli Osmaniye TÜRKİYE FAX NO : Attention :Necati OCAK ([email protected]) SAMPLE DESCRIPTION : Sample 1 One sample of Aliminium rod Sample 2 One sample of ACSR Aluminium conductor Sample 3 One sample of AAAC Aluminium conductor Sample 4 One sample of AAC Aluminium conductor DATE IN : 18 /February /2013 (13:59) DATE OUT : 21 /February /2013 MANUFACTURER S ME COUNTRY OF ORIGIN BUYER S REGION : EMTA KABLO SAN. VE TİC. A.Ş. : NOT GIVEN : EUROPE, ASIA, AFRICA, AMERICA REQUEST RESULTS : RoHS Test was performed according to 2011/65/EU Directive. : SEE ATTACHMENT CONCLUSION : Testing Item Conclusion Sample 1 Sample 2 Sample 3 Sample 4 The test results relate only to the items tested. The whole and/or the part of this test report shall not be reproduced and shall not be shared with third parties, nor to be used for PR activities without the written permission of INTERTEK Test Hizmetleri A.S. The reported uncertainity is based on a standard uncertainity multiplied by a coverage factor k=2, providing a level of confidence of approximately 95%. The uncertainity evaluation has been carried out in accordance with ISO/IEC and UKAS accreditation requirements. Unless otherwise is specified, all Pass or Fail results are given without uncertainity considered. When uncertainity is taken into account, the result may be borderline. Borderline results need to be re-tested to determine their disposition up to customer s decision. Opinions and interpretations expressed herein are outside the scope of UKAS accreditation. Tests marked (*) in this test report are not included in the UKAS accreditation schedule for this laboratory. Bora Şirinbilek Coordinator Neslihan Sözer Chemical Laboratory Manager dogan.kilinc

2 Page 2 of 5 (A) TEST RESULT SUMMARY ACCORDING TO IEC : 2008 Electrotechnical Products-Determination of Levels of Six Regulated Substances TESTING ITEM RESULT Sample Cadmium (Cd) Content Chromium VI (Cr+6) Content (µg/cm²) (for metal) Chromium VI (Cr+6) Result (By spot test on metal) NEGATIVE NEGATIVE NEGATIVE Lead (Pb) Content Mercury (Hg) Content Polybrominated Biphenyls (PBB) Monobromobiphenyl (MonoBB) Dibromobiphenyl (DiBB) Tribromobiphenyl (TriBB) Tetrabromobiphenyl (TetraBB) Pentabromobiphenyl (PentaBB) Hexabromobiphenyl (HexaBB) Heptabromobiphenyl (HeptaBB) Octabromobiphenyl (OctaBB) Nonabromobiphenyl (NonaBB) Decabromobiphenyl (DecaBB) Polybrominated Diphenyl Ethers (PBDE) Monobromodiphenyl Ether (MonoBDE) Dibromodiphenyl Ether (DiBDE) Tribromodiphenyl Ether (TriBDE) Tetrabromodiphenyl Ether (TetraBDE) Pentabromodiphenyl Ether (PentaBDE) Hexabromodiphenyl Ether (HexaBDE) Heptabromodiphenyl Ether (HeptaBDE) Octabromodiphenyl Ether (OctaBDE) Nonabromodiphenyl Ether (NonaBDE) Decabromodiphenyl Ether (DecaBDE) Remarks : ppm=parts per million based on dry weight of sample µg/cm²=microgram per square centimetre mg/kg with 50 cm²=milligram per kilogram with 50 square centimetre =Not detected =Not applicable NR =Not requested *************************************************************************

3 Page 3 of 5 (A) TEST RESULT SUMMARY ACCORDING TO IEC : 2008 Electrotechnical Products-Determination of Levels of Six Regulated Substances TESTING ITEM Cadmium (Cd) Content Chromium VI (Cr+6) Content (µg/cm²) (for metal) Chromium VI (Cr+6) Result (By spot test on metal) Lead (Pb) Content Mercury (Hg) Content Polybrominated Biphenyls (PBB) Monobromobiphenyl (MonoBB) Dibromobiphenyl (DiBB) Tribromobiphenyl (TriBB) Tetrabromobiphenyl (TetraBB) Pentabromobiphenyl (PentaBB) Hexabromobiphenyl (HexaBB) Heptabromobiphenyl (HeptaBB) Octabromobiphenyl (OctaBB) Nonabromobiphenyl (NonaBB) Decabromobiphenyl (DecaBB) Polybrominated Diphenyl Ethers (PBDE) Monobromodiphenyl Ether (MonoBDE) Dibromodiphenyl Ether (DiBDE) Tribromodiphenyl Ether (TriBDE) Tetrabromodiphenyl Ether (TetraBDE) Pentabromodiphenyl Ether (PentaBDE) Hexabromodiphenyl Ether (HexaBDE) Heptabromodiphenyl Ether (HeptaBDE) Octabromodiphenyl Ether (OctaBDE) Nonabromodiphenyl Ether (NonaBDE) Decabromodiphenyl Ether (DecaBDE) RESULT Sample 4 NEGATIVE Remarks : ppm=parts per million based on dry weight of sample µg/cm²=microgram per square centimetre mg/kg with 50 cm²=milligram per kilogram with 50 square centimetre =Not detected =Not applicable NR =Not requested *************************************************************************

4 Page 4 of 5 (B) REQUIREMENT: SUBSTANCE Cadmium (Cd) Content Chromium VI (Cr+6) Content (µg/cm²) (for metal) Chromium VI (Cr+6) Result (By spot test on metal) Lead (Pb) Content Mercury (Hg) Content LIMITS 0.01 % (100 ppm) NEGATIVE (C) TEST METHOD : Testing Item Testing Method Reporting Limit Cadmium (Cd)Content With reference to IEC 62321:2008,by acid 2 ppm Lead (Pb)Content With reference to IEC 62321:2008,by acid 2 ppm Mercury (Hg)Content With reference to IEC 62321:2008,by acid 2 ppm non-metal) With reference to IEC 62321:2008,by alkaline digestion and determined by UV-VIS 1 ppm metal) metal) PBBs/PBDEs spectrophotometer With reference to IEC 62321:2008,by SPOT TEST With reference to IEC 62321:2008,by boiling water extraction and determined by UV-VIS spectrophotometer With reference to IEC 62321:2008,by solvent extraction and determined by GC/MS and HPLC 1 ppm (IN TESTING SOLUTION) 0.02 mg/kg with 50 cm² (IN TESTING SOLUTION) 5 ppm

5 Page 5 of 5 Sample 1 Sample 2 Sample 3 Sample 4 ## E OF TEST REPORT ##