Package Material Declaration

Transcription

1 Code Atmel Corporation Material Declaration Datasheet ASE Shanghai REACH Compliant Yes Material Declaration Leadframe Copper (Cu) Iron (Fe) Sub Total Die Attach Silver (Ag) Acrylic Resin Proprietary Acrylate Proprietary Polybutadiene Copolymer Proprietary Epoxy Resin Proprietary Additive Proprietary Butadiene Copolymer Proprietary Peroxide Proprietary Sub Total Bond Wire Gold (Au) Sub Total Encapsulation Silica Fused Epoxy Resin Proprietary Phenol Resin Proprietary Carbon Black Sub Total Total Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any

2 Code Atmel Corporation Material Declaration Datasheet Nickel Palladium Gold (Ni Pd Au) RoHS Compliant Yes Amkor Philippines REACH Compliant Yes Material Declaration Leadframe Copper (Cu) Iron (Fe) Sub Total Die Attach Silver (Ag) Bisphenol F Epichlorhydrin Resin Polyglycidyl Ester ,6 Diglycidyl Phenyl Allyl Ether Oligomer Proprietary Copper Oxide gamma Butyrolactone Poly(oxypropylene)diamine Proprietary ,4 Bis(2,3 epoxypropoxy)butane Sub Total Bond Wire Gold (Au) Sub Total Encapsulation Silica (Amorphous) Epoxy Resin A Proprietary Epoxy Resin B Phenol Resin Proprietary Carbon Black Sub Total Total Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.

3 Code Atmel Corporation Material Declaration Datasheet Amkor Philippines REACH Compliant Yes Material Declaration Leadframe Copper (Cu) Iron (Fe) Sub Total Die Attach Silver (Ag) Bisphenol F Epichlorhydrin Resin Polyglycidyl Ester ,6 Diglycidyl Phenyl Allyl Ether Oligomer Proprietary Copper Oxide gamma Butyrolactone Poly(oxypropylene)diamine Proprietary ,4 Bis(2,3 epoxypropoxy)butane Sub Total Bond Wire Gold (Au) Sub Total Encapsulation Silica Fused Epoxy Resin Proprietary Phenol Resin Proprietary Metal Hydroxide Proprietary Carbon Black Sub Total Total Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.

4 Code Atmel Corporation Material Declaration Datasheet e4 Green Compliant Yes UTAC Thailand REACH Compliant Yes Material Declaration Leadframe Copper (Cu) Iron (Fe) Sub Total Integrated Circuit Silicon (Si) Sub Total Die Attach Silver (Ag) Epoxy Resin Proprietary Toluene Sub Total Bond Wire Gold (Au) Sub Total Encapsulation Silica Fused Epoxy Resin Proprietary Phenol Resin Proprietary Epoxy, Cresol Novolac Carbon Black Sub Total Total Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Hexavalent Chromium (Cr+6), Polybrominated Biphenyl (PBB), Polybrominated Diphenyl Ether (PBDE) and maximum concentration value of 0.01% (100 ppm) for Cadmium (Cd) in any Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any

5 Code Atmel Corporation Material Declaration Datasheet ASE Shanghai REACH Compliant Yes Material Declaration Leadframe Copper (Cu) Iron (Fe) Sub Total Integrated Circuit Silicon (Si) Sub Total Die Attach Silver (Ag) Acrylic Resin Proprietary Acrylate Proprietary Polybutadiene Copolymer Proprietary Epoxy Resin Proprietary Additive Proprietary Butadiene Copolymer Proprietary Peroxide Proprietary Sub Total Bond Wire Copper (Cu) Palladium (Pd) Sub Total Encapsulation Silica Fused Epoxy Resin Proprietary Phenol Resin Proprietary Carbon Black Sub Total Total Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any

6 Code Atmel Corporation Material Declaration Datasheet Amkor Philippines REACH Compliant Yes Material Declaration Leadframe Copper (Cu) Iron (Fe) Sub Total Die Attach Silver (Ag) Bisphenol F Epichlorhydrin Resin Polyglycidyl Ester ,6 Diglycidyl Phenyl Allyl Ether Oligomer Proprietary Copper Oxide gamma Butyrolactone Poly(oxypropylene)diamine Proprietary ,4 Bis(2,3 epoxypropoxy)butane Sub Total Bond Wire Copper (Cu) Palladium (Pd) Sub Total Encapsulation Silica (Amorphous) A Silica (Amorphous) B Epoxy Resin Proprietary Phenol Resin Proprietary Carbon Black Sub Total Total Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.