Welcome to. Business School. Trade School. Course Catalog Enhance Your Career Today! Last Updated

Transcription

1 Welcome to Business School Trade School Course Catalog Enhance Your Career Today! Last Updated

2 Best Reasons to Choose Technology Learning Center: We offer flexible class scheduling and onsite corporate training. Our students gain knowledge and skill-sets that are immediately usable. Our focus is collaborative - utilizing staff, faculty and student expertise. Our educators are highly motivated to teach, guide and recognize success. We offer student loans at no interest and affordable tuition and payment programs for those who qualify. Our offer online courses, including certified steam engineering courses that are accessible from any computer.

3 A Message from Our President Dear Student, Thank you for your interest in Technology Learning Center. During these challenging economic times we believe it is essential to optimize your practical skill sets and educational training in order to find the most sustaining career that is right for you. At Technology Learning Center we strive to make that possible for all of our students. My staff and I, all educational professionals from each program we offer, will work hard to give you the tools necessary to exceed your expectations. Our flexible class schedules and online courses complements your lifestyle and work schedule. We will provide you with a professional curriculum and opportunities for practical training and application. Our main objective is to offer you specialized instruction in pursuit of your goal to advance your skill-set in business or as a licensed operator, technician or specialist in your field. Our success is your success! Sincerely, Tony Chamoun, President

4 Table of Contents: Our Mission & Vision 5 School History 6 Location & Facility 6 Admission Requirements 7 Registration Form 8 Financial Aid, Student Loans, Payment Methods 9 School Policies 10 Refund Policy 11 Probation & Termination Policy 12 Complaint Resolution Policy 12 Satisfaction Progress Program Policy 13 Grading Policies 14 Course Details 14 Transfer of Credits 14 Course Support & Career Services 15 School Licenses 15 School Holidays 15 Heating, Ventilation, Air Conditioning & Refrigeration Programs Solar Water Heating Technology 21 Geothermal Heating & Cooling 22 HVACR Technician and Green Technologies Program 23 Power Plant/Steam Engineering Industrial Training Facilities Technician Program Continuing Education Courses (Total Contact Hours) 33 Business Training Programs Contact Information 36 4

5 Our Mission Technology Learning Center is committed to offering excellence in education by providing men and women innovative and quality coursework in both trade and business skill-sets, with focus on theory and practice. Our Vision At the heart of the Technology Learning Center is our commitment to teaching through theory and collaborative practice. To be an educational facility that best understands the needs of the student, we strive for excellence in offering: A student-centered, hands-on practical approach to quality education by retaining and graduating more students; Highly qualified professionals that have the ability to motivate, inspire, validate, accept and guide individuals toward their academic and professional achievement; A wide range of innovative courses that promote individual achievement and personal success; State-of-the-art classroom technologies that promote enhanced learning at affordable prices; Continued commitments toward up-dating technologies; coursework strategies and building community awareness to incorporate more service learning and civic engagement activities into our curriculum. Technology Learning Center values insightful, professional, integral partnerships among faculty, staff, students and the community to serve the educational needs of those inspired to develop and enhance their business and technical skill-sets. 5

6 Established in 2001, Technology Learning Center provides continuing education to individuals that wish to develop a new skill set or enhance an existing one. Both our business and trade school offers flexible class schedules that are designed to work around our students busy schedules. Over the past decade we have continued to grow, due to the success of our highly motivated students and by working with instructors that bring their unique teaching styles and valuable expertise to the classroom. Each instructor offers professional instruction based on an abundance of workplace experience, and will remain dedicated to guiding our students to success. We provide a professional curriculum and opportunities in both theory and practical training and application. Our goal is to prepare our students for success. Main Address: 11 Buffum Dam Road Oxford, MA School History Location & Facility Our 8,000 sq. foot, two-story, facility consists of a 2,000 sq ft lab that houses: 2 Residential Heating Boilers and Furnaces 2 Central AC units 1 Heat Pump 3 Solar Water Heating Systems Five Refrigeration systems One Roof-Top Cooling System One Refrigeration and Heat Pump actual simulator One Refrigeration Computer based simulator One Oil Heating Computer based simulator Steam Turbine Industrial Boiler 10 Oil Burners Our classroom space is a dedicated 4,000 sq ft, equip with overhead projectors, computers and dry erase boards. The remainder of the 8,000 sq feet is used for office space, utility rooms, storage, and rest rooms. The facility meets all State and local codes and is handicapped accessible. 6

7 Admission Requirements Program Admission Requirements HVACR101 HVACR Technician HVACR 102 HVACR Technician and Green Technology FT101 Facility Technician FT102 Facility technician with Green Awareness & Indoor Air Quality Bookkeeping & Accounting Skills Computer A+ Essentials, Networks & Security All other courses or programs 11 Buffum Dam Road Oxford, MA yrs of Age, must have a High school diploma or GED, or pass the ATB Exam 18 yrs of Age, must have a High school diploma or GED, or pass the ATB Exam 18 yrs of Age, must have a High school diploma or GED, or pass the ATB Exam 18 yrs of Age, must have a High school diploma or GED, or pass the ATB Exam 18 yrs of Age, must have a High school diploma or GED, or pass the ATB Exam 18 yrs of Age, must have a High school diploma or GED, or pass the ATB Exam 18 yrs of Age & English competency To apply to Technology Learning Center, please call us to begin the process

8 Registration Form Full Name: Street Address: City: State: Zip: Mailing Address: City: State: Zip: Business or Organization: Telephone: Course(s) Planning to Attend: Course Location: Oxford, MA or Other Location: Starting Date: Payment method: Company Purchase Order Number (if applicable): 8

9 Financial Aid, Student Loans Payment Methods At Technology Learning Center we try to make paying for your education as trouble free as possible. Depending on your needs, payment options may vary. Unemployed Students: Unemployed students may be eligible for education funds through work force development. Employed Students: For students who are already employed, their employers may pay for them to advance their license or take continuing education through their employer s education reimbursement program. Pay-as-you-go: Another well-liked payment option offered is the easy pay as you go plan. Student Loans: Student loans are also available to qualified candidates through Technology Learning Center. Approved for VA Education Benefits & GI Bill 10% Military Discount For more details and questions about which payment plan is best suitable for you please call our office at

10 School Policies Attendance Policy Students must maintain 90% attendance during each term and must earn 70% grade average for graduations. Leave of absence is allowed providing that a student has a legitimate reason. Students on a leave of absence will be credited for money paid and subject completed when they return. Students who cannot maintain 90% attendance during a specific program or course will be subjected to dismissal. Students who maintain 90% attendance during a specific term but fail to maintain at least 70% final grade average will be allowed to repeat the term one time only at no charge within one year from the date of the initial enrollment. Acceptance of Outside Credits Policy Students may be granted credits for subjects taken at other institutions to shorten their program providing that the other institution is qualified by the appropriate boards and agencies. Job Placement Policy Technology Learning Center will assist its graduates on finding employment and will maintain an active data base related to potential employers. However, Technology Learning Center does not guarantee a job upon completion of the course or program. Make-Up Work Make-up work is applicable for students that miss classes due to an excusable reason such as sickness or family emergencies. Make up classes cannot exceed 10% of the program load. Student Conduct Respect for law and for those persons in authority shall be expected of all students. This includes conformity to school rules as well as general provisions of law affecting students. Respect for the rights of others, consideration of their privileges, and cooperative behaviors shall also be expected of all students. Respect for property of all is expected at all times. Standards of courtesy, decency, and honesty shall be maintained by all students. 10

11 Refund Policy/Enrollment Agreement Students will be required to sign an Enrollment Agreement as required by the Massachusetts General Law Chapter 255, Section 13K. The Enrollment Agreement will include a refund policy and meet the Refund Policy / Enrollment Agreement The Standards of Accreditation. 11

12 Probation and Termination Policy A student may be placed on probation or terminated for, but not limited to the following reasons: Not maintaining satisfactory progress or experiencing excessive absenteeism. A student may also be suspended/dismissed or terminated from the school because of inappropriate conduct, possession of drugs, alcohol or weapon on school premises. A student may also be terminated for not meeting the tuition payment commitments. A student may appeal a determination of suspension/ dismissal/termination by submitting a written appeal to the School Director. The School Director will review the appeal and make a determination of the reentry. The decision of the School Director shall be final. Complaint Resolution Policy Step1: An informal complaint from a student will be brought up to the instructor. The instructor will resolve the issue within three days. Step2: If the issue is not resolved within the three day period or if the student is not satisfied with the resolution, the student can make a formal complaint to the school director. Step3: The school director will arrange for a meeting within one week from receiving the formal complaint. The student will be asked to give the school two days to address the complaint. The student has the right to contact the Massachusetts Division of Professional Licensure, Office of Private Occupation Education: Phone: or E:mail: occupationalschools@state.ma.us 12

13 Satisfactory Progress Program Policy Technology Learning Center will implement a satisfactory progress program to enhance the center's learning techniques in which the students will be informed on his or her progress on weekly basis. As part of this program the instructor will identify areas of studies that require extra attention from the student. In some cases the instructor might offer extra help for those who need it outside regular class room hours at no extra charge to the student. Normally, extra help sessions are offered for half an hour prior to the start time of each class. Every student, regardless of grade, will receive a written academic progress report at least once during the span of the class. A copy of the satisfactory progress report will be maintained by the school in the student s file. 13

14 Grading Policy Grading is based on averaging four exams in each subject that will count for 90% of the final grade and 10% credits for a project related to the subject of study. The project could be a paper project or a lab project. A grade report sample is attached. 70% final grade average and 90% attendance is required for passing a course. Grading/Assessment System The internal grading/assessment system is a tool for teachers to grade/assess and to recognize the progress and the level of students educational achievements and to inform students about the level and progress of their educational achievements. The assessment is divided into: Progress assessing/grading and end of semester grading or final grades. The percentage grading system is adopted as follows: Excellent 100% to 95% Very Good 94% to 90% Good 89% to 80% Satisfactory 79% to 70% Failed 69% and less Grading Policies Required Levels of Performance for Graduation: 70% Grade, and 90% attendance Program Completion Upon completion of a program in academic standing, students will receive a certificate. Course Details: Each class will enroll a maximum number of 20 students 14

15 Course Support and Career Services Students who wish to receive career advising may meet with the school s Career Service Specialist as many times as needed. This service consists of preparing resumes and providing students with job openings and in some cases when applicable, setting up job interviews. This service is provided to all students enrolled at the school. Students who need academic support may request a meeting with their instructor outside the scheduled teaching hours or with the school director. The student will receive extra help in their areas of studies and clarifications of subjects that might be unclear. This service is provided to all students enrolled at the school. School Licenses Technology Learning Center is licensed by the Massachusetts Department of Education. The HVACR and Steam Engineering licensing programs are approved by the Department of Public Safety. The Wastewater Treatment Courses are approved by the Department of Environmental Protection. New Year s Day Patriot s Day Memorial Day Independence Day Labor Day Veteran s Day Thanks Giving Day Christmas Eve Christmas Day New Year s Eve School Holidays 15

16 Heating, Ventilation, Air Conditioning & Refrigeration Programs HVACR01 Residential Oil Heat Technology & Services Objective: Students will learn the basics of residential heating and oil burner technology, installation, service, repair and maintenance. Upon completion of this course students will be prepared for the State Oil Burner Technician License exam. Course emphasis on both hands-on practice and theory. Course Contact Hours: 112 Hours Schedule: Two nights per week, 14 weeks Cost: $1,400 plus the cost of book(s) and materials HVACR02 Residential Gas Heat Technology & Services Objective: Students will learn the basics of residential gas heat technology, installation, service, repair and maintenance. Course emphasis on both hands-on practice and theory. Course Contact Hours: 88 Hours Schedule: Two nights per week, 11 weeks Cost: $1,200 plus the cost of book(s) and materials 16

17 HVACR01/02 Combined Residential Gas and Oil Heat Technology and Services Objective: Students will learn the basics of both residential gas and oil heat technology, installation, service, repair and maintenance. Upon completion of this course students will be prepared for the State Oil Burner Technician License exam. Course emphasis on both hands-on practice and theory. Course Contact Hours: 170 Hours Schedule: Two nights per week, 17 weeks Cost: $1,900 plus the cost of book(s) and materials HVACR03 Industrial and Commercial Refrigeration Objective: Students will learn the basics of refrigeration technology, as applied in residential, commercial and industrial applications. Enrolled students will earn 100 credit hours of advanced refrigeration theory as required by Massachusetts Department of Public Safety for technician and contractor licensing. Course Contact Hours: 110 Hours Schedule: Two nights per week, 13 weeks Cost: $2,500 plus the cost of book(s) and materials 17

18 HVACR04 Electricity and Electrical Code for Refrigeration Objective: Students will earn 150 credit hours of electrical code required for Massachusetts Technician Licensing. Course Contact Hours: 150 Hours Schedule: Two nights per week, 20 weeks Cost: $1,200 plus the cost of book(s) and materials HVACR05 Air Distribution and Quality Objective: Students will learn the principles of conditioned air quality, air distribution and duct sizing. Course Contact Hours: 40 Hours Schedule: Two nights per week, 4 weeks Cost: $900 plus the cost of book(s) and materials 18

19 HVACR06 Refrigeration Transform Recovery and Environmental Protection Agency (EPA) Certificate Objective: Upon completion of this course, students will receive the EPA certificate for transition and recovery of refrigerants. Certification test will be conducted in-house. Course Contact Hours: 20 Hours Schedule: Four Nights Cost: $250 plus the cost of book(s) and materials 19

20 HVACR101 HVACR Technician Program Combines HVACR01, 02, 03, 05 & 06 Objective: Students will learn the basics of heating, ventilation, air conditioning and refrigeration. Including, system sizing, installation, service, repair and maintenance applied to both residential and commercial applications. The course included the Refrigerant Transition Recovery EPA certificate and upon completion of this course students will be prepared for the Massachusetts State Licensing exams. Course Contact Hours: 340 Hours Schedule: Four nights per week, 17 weeks Cost: $5,500 plus the cost of book(s) and materials 20

21 HVACR07 Solar Water Heating Technology Objective: This course is a blend of hands-on classroom sessions and upon successful completion students will have full understanding of the basics of solar water heating for residential and light commercial applications. The cover covers site preparation, material selection, equipment sizing, rebate calculations, controls setup and system repairs. Course Contact Hours: 24 Hours Schedule: Call for details Cost: $900 plus the cost of book(s) and materials 21

22 HVACR08 Geothermal Heating and Cooling Objective: To study of the details, benefits and installation methods of ground source heating and cooling systems. At the completion of this course students should be able to: Use safety precautions during the installation process. Design and Installation Standards Grouting for Vertical Heat Pump Systems Understand basic design parameters. Course Outline: - Introduction - Heat Pump Operation - Heat Fusion & High Density Polyethylene - Closed Loop Horizontal Systems - Closed Loop Vertical Systems - Lake/Pond Heat Exchangers - Open Loop Systems - Direct Exchange using Refrigerants Course Contact Hours: 14 Hours Schedule: Call for details Cost: $850 plus the cost of book(s) and materials. 22

23 HVACR102 HVACR Technician and Green Technologies Program Combines HVACR01, 02, 03, 05, 06, 07 & 08 Objective: This program includes are complete HVACR Technician Program plus Solar Water Heating Technology and Geothermal Heating and Cooling. The classroom design sessions and hands-on projects are also part of this exciting program. This is an excellent opportunity for anyone interested in learning the HVACR and Green Industry as related to the heating and cooling field for residential and light commercial applications. Course Contact Hours: 378Hours Schedule: Evening, Full Time 4:00pm-9:00pm Cost: $6,650 plus the cost of book(s) and materials 23

24 Power Plant/Steam Engineering Programs Professional Advancement in Industrial Training 1 st Class Engineer 2 nd Class Engineer 3 rd Class Engineer 1 st Class Fireman (Advanced Boiler Operator) 2 nd Class Fireman (Boiler Operator) The Boiler Operator position is the entry level industrial training position. Each higher position requires new testing and certification. Through continued testing, certification and experience you can become a 1 st Class Engineer. 24

25 EN1E Power Plant Engineer 1 st and 2 nd Class Engineer Objective: This course prepares students for the 1 st and 2 nd Class Engineer exams to operate and manage steam power plants. Additionally, students will receive a 30-hour Continuing Education Certification for license renewal. Course Outline: 1) Math, simplified physics, chemistry and thermodynamics. 2) Combustion, metallurgy and chemical treatment. 3) Power plant calculations: efficiency, heat rate, steam rate, horsepower, steam pipe sizing, heat recovery, blow down equipment sizing and more. 4) Construction, operation, repairs and maintenance of boilers, steam turbines, gas turbines and generators. 5) Pump principles: selection, application and maintenance. 6) American Society Mechanical Engineers (ASME) applicable codes, National Board Inspection Code (NBIC) and related Massachusetts laws, regulations and codes. 7) Water treatment. 8) Turbines, condensers and generators. 9) Oral Exam preparation and practice. Course Contact Hours: 48 Hours Schedule: Call for details Cost: $1,600 plus the cost of book(s) and materials 25

26 EN3E Power Plant Operator 1 st Class Fireman & 3 nd Class Engineer Objective: Students will be prepared for the 3 rd Class Engineer license exam or the 1 st Class Fireman exam to operate steam power plants. Upon completion of this course, students will receive a 30-hour Continuing Education Certificate for license renewal in Massachusetts. Course Outline: 1) Steam use and applications. 2) Basic mathematics. 3) Fuel and combustion. 4) Burners and controls. 5) Steam traps and heating systems. 6) Water treatment. 7) Turbines, condensers and generators. 8) National and local codes and regulations, pertaining to boilers and pressure vessels. Course Contact Hours: 48 Hours Schedule: Monthly enrollment with day, evening & online sessions. Classes meet once a week, 16 weeks. Cost: $1,295 plus the cost of book(s) and materials 26

27 FM2F Boiler Operator, 2 nd Class Fireman Objective: Students will be prepared for the Massachusetts state licensing exam for high pressure boiler operation. Course Outline: 1) Boiler theory and operation. 2) Boiler construction and design. 3) Steam systems and controls. 4) Water supply systems and controls. 5) Fuel systems and controls. 6) Draft and flue gas systems. 7) Boiler operation and maintenance. 8) National and local codes and regulations, pertaining to boilers and pressure vessels. Course Contact Hours: 60 Hours Schedule: Classes meet twice a week, 10 weeks Cost: $1,295 plus the cost of book(s) and materials 27

28 SPL101 Special Licenses for Boiler Operators Objective: This course is customized to meet special equipment requirements and will be held on customer site. Course Outline: 1) Boiler plant principles. 2) Boiler plan operation and maintenance. 3) Water treatment for boiler plant. 4) Understanding boilers. 5) Massachusetts laws and regulations regarding boiler plant operation, maintenance, inspection and licensing. Course Contact Hours: Customized Schedule: By arrangement Cost: Call for a quote 28

29 Industrial Training Programs PF101 Pipe Fitting Principles and Codes Objective: Students enrolled in this program will be prepared to pass the Massachusetts Journeyman and Master Pipe Fitter exams. Students will receive standard credit hours required by the State of Massachusetts. Pipe Fitting I: 100 Credit Hours Course Outline: 1) Introduction to heating and power boilers. 2) Massachusetts regulations 522 CMR ) Massachusetts regulations 528 CMR 10 4) Introduction to section I and IX of the American Society Mechanical Engineers (ASME) boiler and pressure vessel codes. 5) Review of power piping code. Schedule: Call for details Cost: $1,200 PF102 Pipe Fitting II: 100 Credit Hours Course Outline: 1) Review of section I of ASME code and vessel pressure codes. 2) Introduction to section IV of ASME code and vessel pressure code. Introduction to heating and power boilers. 3) Mathematics for pipe fitters. 4) Steam system piping and support. Schedule: Call for details Cost: $1,200 29

30 WWT101 Waste Water Treatment, Industrial Levels 1, 2, 3 & 4 Objective: License preparation course for the Waste Water Treatment Operators exam. Note: Waster water treatment operators must complete 20 technical contact hours (TCH) every 2 years in order to maintain licensing. We offer 11 approved topics for TCH. Subjects Credit Hours Instrumentation and controls I 10 Instrumentation and controls II 10 Electrical plant systems I 10 Electrical plant systems II 10 Pump theory and maintenance I 10 Pump theory and maintenance II 10 Piping and fitting 10 Auxiliary Maintenance 10 Pipe Welding 10 Air compressor principles and maintenance 10 Hydraulic systems operation and maintenance 20 Schedule: Online and in-class programs available. Cost: $650 plus the cost of book(s) and materials for license portion. $300 for 20 TCH. 30

31 Facilities Technician Programs FT101 Facilities Technician Program Objective: Combines Boiler Operator, 2 nd Class Fireman License Preparation, HVACR03, HVACR05, Waste Water Treatment Preparation Refrigerant Recovery Training and EPA Certification Exam. Course Outline: 1) Boiler operation and theory. 2) Boiler construction and design. 3) Steam systems and controls. 4) Water supply systems and controls. 5) Fuel systems and controls. 6) Draft and flue gas systems. 7) Boiler operation and maintenance. 8) National and local codes & regulations regarding boilers and pressure vessels. 9) Industrial and commercial refrigeration: Theory & Lab 10) EPA refrigeration recovery. 11) Industrial waste water treatment, level 1 Course Contact Hours: 340Hours Schedule: Evening, Full Time 4:00pm-9:00pm Cost: $4,700 plus the cost of book(s) and materials 31

32 FT102 Facilities Technician Green Awareness & Indoor Air Quality Program Objective: This program addresses the gap in green mechanical education. Combining the Facilities Technician program with Gwen Awareness and Indoor Air Quality (IAQ). This course has 4 main sections: Section 1: Core knowledge of energy management and analysis. Section 2: Green heating, ventilation, air conditioning & refrigeration. Section 3: Electrical generation and consumption. Section 4: Green plumbing. The student will be prepared to take the Green Awareness Certification Exam. This certification is offered by Ferris State University and the Green Mechanical Council. Technology Learning Center proctors the certification exam. Course Contact Hours: 370 Hours Schedule: Evening, Full Time 4:00pm-9:00pm Cost: $5,900 plus the cost of book(s) and materials 32

33 Continuing Education Courses (Total Contact Hours) CE101 Continuing Education for Boiler Operators and Power Plant Engineers Massachusetts state laws & regulations requires 30 contact hours of continuing education for license renewal. Course Contact Hours: 30 Hours Schedule: Class runs every Tuesday from 9:00am to 3:00pm Cost: $125 per class WWT102 Online Total Contact Hours Waste Water Treatment Massachusetts state laws & regulations requires 20 contact hours of continuing education for license renewal. Course Contact Hours: 20 Hours Schedule: Online Cost: $300 33

34 Business Training Programs ACC101 Bookkeeping & Accounting Objective: This program is designed to train you on Bookkeeping and Accounting Skills. You will learn to work in an office environment using Microsoft Office Applications such as; Outlook, Excel and Word. In addition, you will learn how to use QuickBooks and Payroll Setup as well as Tax Filing and Financial Report Generation. Part I: - Windows Operating Systems - Microsoft Internet Explorer - Accounts and Addresses - Microsoft Outlook - Bookkeeping Skills Part II: - Microsoft Word - Microsoft Excel - Different Types of Business Entities - Payroll & Tax Filing - Certification Exam Preparation Course Contact Hours: 220 Hours Schedule: Monday Friday, 9:00am-2:00pm Cost: $3,550 plus the cost of book(s) and materials 34

35 PC101 Computer A+ Essentials, Networks & Securities Objective: This course covers materials related to the support of PC hardware in a business setting, including; installation, troubleshooting and component replacement. In addition you will be prepared for the CompTIA A+ Certification Exam. Course Outline: 1) Install and manage network components. 2) Maintain and troubleshoot computer security. 3) Install, manage and optimize operating systems. 4) Install, maintain and troubleshoot printers and scanners. 5) Maintain and troubleshoot personal computer components. 6) Install and troubleshoot laptops and other portable computer devices. 7) Install, configure, optimize and upgrade personal computer components. 8) Identify the names, purposes and characters of basic network protocols and terminologies. 9) Investigate tools, issues and skills that form the best practices of IT technical professionals. 10) Certification Exam Preparation Course Contact Hours: 260 Hours/13 weeks Schedule: Monday Friday, 6:00pm-10:00pm Cost: $5,500 plus the cost of book(s) and materials 35

36 Our Location: 11 Buffum Dam Road Oxford, MA P: (508) F: (508) Our Success is Your Success! 36