Colorado Sheet Metal Workers Upgrade/Continuing Education Catalog for

Transcription

1 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes Date: August 9,2013 Colorado Sheet Metal Workers Upgrade/Continuing Education Catalog for A List of Classes offered at your Local Apprenticeship Program All Classes listed within are offered at the local apprenticeship school unless otherwise noted. If enrolled in class all participants must sign scholarship loan agreement. College credits are given for all classes taken.

2 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30, 2013 to be eligible for participation in classes A minimum of 12 students is required to hold a class. Class dates will be determined based on enrollment unless the class is established as an apprentice class. All applicants will be notified upon complete enrollment as to dates and times of said Classes Denver Training Center 1515 W 47th Ave; Denver, CO Phone: Fax: [email protected] Colorado Springs Training Center 1420 Quail Lake Loop; Colorado Springs, CO Phone: ext. 11 Fax: [email protected] Grand Junction Training Center 810 N Crest Dr. Unit 6; Grand Jct, CO Phone : Fax: [email protected] Page 2

3 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes Table of Contents International Mechanical/Fuel Gas Code (Den) 5 International Mechanical/ Fuel Gas Code MECH4 (CS) 5 Core Service (Residential Controls) (Den & CS & GJ) 6 Service 1 (Den & CS & GJ) 6 Service 2 (Den & CS) 7 Service 3 (Den & CS) 7 Service 1A 7 CFC Certification (Den & CS) 8 Basic Testing, Adjusting and Balancing (Den & CS) 8 Advanced Testing, Adjusting and Balancing (Den & CS) 9 Basic AutoCAD and Detailing (Den & CS) 9 Advanced AutoCAD and Detailing (Den & CS) 9 Cad 3D Basic and Detailing (Den & CS) 10 Advanced CAD/CAM (Den) 10 Welding (Den & CS and GJ ) 11 & 12 Residential Sheet Metal (Den & CS) 12 Architectural Metals (Den & CS) 13 New ITI Calculator Class (Den & CS and GJ) 13 Industrial 1,2 & 3 (Den & CS) 14 & 15 Page 3

4 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30, 2013 to be eligible for participation in classes Foreman Training (Den & CS and GJ) 15 Reading Plans & Specs (Den & CS and GJ) 15 Fire/ Life Safety Technician 1 (Den) 16 Fire/ Life Safety Technician 2 (Den) 16 IAQ (Indoor Air Quality) (Den) 17 HVAC Energy Audit/Total Building Audit (Den) 17 Medic/ First Aid (Den & CS and GJ) 18 Medic/ First Aid Recertification (Den & CS and GJ) 18 Hazard Communication Standards (Den & CS) Hour OSHA Certification (Den & CS and GJ) Hour OSHA Certification (Den & CS and GJ) 18 Hoisting and Rigging (Den & CS and GJ) 18 Crane Signaling (Den & CS and GJ) 18 Project Management (Den & CS and GJ) 18 Basic Layout (Den & CS and GJ) 18 Advanced Layout (Den & CS) 18 TABB Supervisor (Den) 18 Welding Certification (Den & CS and GJ) 18 Supervisory Training (Den & CS and GJ) 18 Estimating (Den & CS and GJ) 18 Page 4

5 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: International Building Code/Fuel gas Code PREREQUISITE: None COURSE DESCRIPTION: An extensive overview of the changes that are currently being implemented by Denver, Larimer, Douglas, Arapahoe and several other municipalities throughout Colorado in regards to the International Mechanical code. Can be used as a preparatory class for the Denver H&V license. LENGTH OF COURSE: 16 HOURS each class will last 4 hours from 6:00 p.m. to 10:00 p.m. CLASS SIZE: Maximum of 20 FEES: $ for set of books (Fees will be refunded if perfect attendance is attained.) LOCATION: Denver Facility INSTRUCTOR: TBD NOTE: More than one class may be held throughout the year. COURSE TITLE: MECH 4/ IMC/ IFGC Class PREREQUISITE: None COURSE DESCRIPTION: An extensive overview of the changes that are currently being implemented by municipalities throughout Colorado in regards to the International Mechanical code, and the MECH 4 code. LENGTH OF COURSE : 24 hours held one night a week for four hours a night for six weeks. This class has been approved for credits towards your MECH 4 license DATES: To be determined by response FEES: To be determined LOCATION: Colorado Springs facility INSTRUCTOR: Rich Thompson Page 5

6 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30, 2013 to be eligible for participation in classes COURSE TITLE: CORE SERVICE (RESIDENTIAL CONTROLS) PREQUISITE: None COURSE DESCRIPTION: This course covers basic wiring diagrams, how to troubleshoot residential furnace/ac units. A passing grade in this course is a prerequisite for all other offered service classes. LENGTH OF COURSE: 32 hours and will be 4 classes that are 8 hours long held on Saturdays. CLASS SIZE: Class size limited to 15 FEES : None LOCATION: Denver, Colorado Springs, Grand Junction INSTRUCTORS: John Eckler, (Denver), Rich Thompson (CS), Rick Padilla (GJ) ATTENDANCE: 100% percent attendance is required for credit. NOTE: More than one class may be held throughout the year. COURSE TITLE: SERVICING ENVIRONMENTAL SYSTEMS 1 PREREQUISITE: Must have passed Core Service or Equivalent COURSE DESCRIPTION: This Course covers direct and alternating current, including circuits, switches, capacitors, diagrams and thermostats, furnace controls and valves. LENGTH OF COURSE: 128 hours, Each session is four hours from 6:00 p.m. to 10:00 p.m. DATES: Tuesdays Starting September 11, 2013 and Completing on May 7, CLASS SIZE: Minimum class size of 5 students, and a maximum of 20 students. LOCATION: Denver, Colorado Springs, Grand Junction INSTRUCTORS: TBD (Denver) Jeff Green (CS) NOTE: This is an elective course offered to apprentices so class size may be limited Page 6

7 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: SERVICING ENVIRONMENTAL SYSTEMS 2 PREREQUISITE: Completion of Service 1 or Equivalent COURSE DESCRIPTION: This course Covers Refrigeration cycles and components along with troubleshooting electrical and refrigeration Cycles as well as Digital and Pneumatic Devices. LENGTH OF COURSE: 128 hours. Each Session is 4 hours, from 6:00 p.m. to 10 :00 p.m. DATES: Tuesdays Starting September 11, 2013 and completing on May 20, 2014 in Denver. CLASS SIZE: Minimum class size of 5 and a maximum of 20 LOCATION: Denver, Colorado Springs INSTRUCTORS: John Eckler (Denver), Rich Thompson (CS) NOTE: This class is offered to apprentices as an elective so Class size is limited. COURSE TITLE: SERVICING ENVIRONMENTAL SYSTEMS 3 PREREQUISITE: Completion of Service 2 or Equivalent COURSE DESCRIPTION: This Course covers commercial systems, commercial heat pumps, pneumatic controls, DDC, maintenance contracts,building maintenance, chillers and boilers. LENGTH OF COURSE: 128 Hours. Each Session is 4 hours, from 6:00 p.m. to 10:00 p.m. DATES: Tuesdays in Denver Starting September 11, 2012 and Completing on May 7,2013 and Mondays in Colorado Springs, September 9, 2013 in Colorado Springs CLASS SIZE: Minimum class size of 5 and a maximum of 20 LOCATION: Denver, Colorado Springs INSTRUCTORS : John Eckler (Denver), Rich Thompson (CS) NOTE: This course is offered to apprentices as an elective course so space is limited. COURSE TITLE: SERVICE 1A PREREQUISITE: Must have passed Core Service or Equivalent COURSE DESCRIPTION: This Course covers direct and alternating current, including circuits, switches, capacitors, diagrams and thermostats, furnace controls and valves. LENGTH OF COURSE: 64 hours. DATES: Every 4 th Saturday Starting Sept through May CLASS SIZE: To be determined by response. LOCATION: Grand Junction INSTRUCTORS: Rick Padilla Page 7

8 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30, 2013 to be eligible for participation in classes COURSE TITLE: CFC CERTIFICATION PREQUISITE: None COURSE DESCRIPTION: Review EPA standards and prepare for CFC universal exam. Test will be taken after review of standards. LENGTH OF COURSE: This course requires a 4 hour preparatory review which will be held on a weeknight as well as a 4 hour review on Saturday following with the test following the review. CLASS SIZE: To be determined by response. FEES: If UNIVERSAL certification is received on first EXAM there is no fee, however if Universal is not achieved $25.00 will be required for each subsequent exam. LOCATION: Denver, Colorado Springs and Grand Junction Training Centers INSTRUCTORS: John Eckler (Denver), Rich Thompson (CS) and TBD (GJ) ATTENDANCE: COURSE TITLE: TESTING, ADJUSTING AND BALANCING (TAB) Basic) PREQUISITE: None COURSE DESCRIPTION: This course covers the basics of both air and hydronic balancing. It introduces students to Testing, Adjusting and Balancing of systems, instruments and procedures. LENGTH OF COURSE: 128 hours. Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. DATES: Tuesday in Denver starting on September 11, 2013 or Thursday in Colorado Springs starting on September 13, CLASS SIZE: Minimum class size of 5 students, and a maximum of 20 students. LOCATION: Denver, Colorado Springs INSTRUCTORS: Joshua Uncapher (D), Eric Russell (CS) NOTE: This is an elective course offered to apprentices so class size may be limited. First come, first serve. Page 8

9 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: TESTING, ADJUSTING AND BALANCING (TAB) Advanced) PREQUISITE: Must have completed Basic TAB or Equivalent COURSE DESCRIPTION: This course covers the advanced aspects of both air and hydronic balancing. It prepares students to successfully take the TABB written and practical exam for TABB certification LENGTH OF COURSE: 128 hours. Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. DATES: Thursdays 9/12/2013 thru 5/20/2014 in Denver and in Colorado Springs. CLASS SIZE: Class size is limited. Entry is based on first sign in first to receive class. LOCATION: Denver, Colorado Springs INSTRUCTORS: TBD (D), Eric Russell (CS) COURSE TITLE: BASIC and ADVANCED AUTOCAD and Detailing PREQUISITE: Basic understanding of Microsoft s Windows operating systems. COURSE DESCRIPTION: This class will instruct the student on basic AUTOCAD skills and drawing set-up. The second semester class focuses on actual Sheet Metal Industry practices. LENGTH OF COURSE: 128 Hours/ Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. DATES: Thursdays 9/12/2013 thru 5/22/2014 in Denver and Tuesdays 9/10/2013 thru 5/20/2014 in Colorado Springs. CLASS SIZE: Minimum Class size of 6 maximum of 10 first signed in first to receive class. FEES: $ This fee covers AUTOCAD software and Books. LOCATION: Denver, Colorado Springs INSTRUCTORS: TBD ( Denver), Thad Smotherman (CS) NOTE: Course Fee is reimbursed if perfect attendance is attained. Page 9

10 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30, 2013 to be eligible for participation in classes COURSE TITLE: BASIC 3D AUTOCAD/ and Detailing PREREQUISITE: Basic AutoCAD and Detailing COURSE DESCRIPTION: This Course is designed to add to the knowledge received in the Basic AUTOCAD class. The Student will learn how to draw 3d objects in AUTOCAD. These objects will be generated by both AUTOCAD and or by a third party duct drawing program. LENGTH OF COURSE: 128 Hours/ Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. DATES: Tuesdays 9/10/2013 thru 5/20/2014 in Denver and In Colorado Springs. CLASS SIZE: Minimum Class size of 6 maximum of 10 first signed in first to receive class. FEES: $ This fee covers AUTOCAD software and Books. LOCATION: Denver, Colorado Springs INSTRUCTORS: Chris Salazar (Denver), Thad Smotherman (CS) NOTE: Course Fee is reimbursed if perfect attendance is attained. COURSE TITLE: ADVANCED SHEET METAL CAD/CAM PREREQUISITE: Basic 3d AUTOCAD and Detailing COURSE DESCRIPTION: This Class Focuses on the process of building a sheet metal shop drawing using a 3rd party software that can be downloaded directly to the manufacturing equipment. The student will also learn how to manipulate the database to produce a bill of materials and job reports. LENGTH OF COURSE: 128 Hours/ Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. DATES: Tuesdays 9/11/2013 thru 5/20/2014 in Denver and In Colorado Springs.. CLASS SIZE: Minimum Class size of 6 maximum of 10 first signed in first to receive class. FEES: $ This fee covers AUTOCAD software and Books. LOCATION: Denver, Colorado Springs INSTRUCTORS: Chris Salazar ( Denver), Thad Smotherman (CS) NOTE: Course Fee is reimbursed if perfect attendance is attained. Page 10

11 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: WELDING (DENVER) PREREQUISITE: NONE COURSE DESCRIPTION: The Denver school is now a certified welding lab. So there is potential for the student to become certified in several different facets of the welding industry. This class will be flexible and will allow the student to gain experience in the welding area of their choice. Please indicate your welding experience on the Continuing Education Form (Green Sheet) and the type of welding that you are interested in. LENGTH OF COURSE: 60 hours each semester. Classes will be 4 hour sessions from 6:00 p.m. to 10:00 p.m. DATES: First Semester begins Tuesday September 11, 2013 thru January 14, Second Semester starts Thursday January 21, 2014 thru May 20, 2014 CLASS SIZE: 18 max LOCATION: Denver INSTRUCTOR: Chase Bergeron NOTE: Welding personnel protective equipment (Hood, leathers, gloves and safety glasses) must be supplied by student. All other supplies furnished by JATC. COURSE TITLE: WELDING (COLORADO SPRINGS) PREREQUISITE: None COURSE DESCRIPTION: The Colorado Springs school is a certified welding lab. So there is potential for the student to become certified in several different facets of the welding industry. This class will be flexible and will allow the student to gain experience in the welding area of their choice. Please indicate your welding experience on the Continuing Education Form (Green Sheet) and the type of welding that you are interested in. LENGTH OF COURSE: 60 hours each semester. Classes will be 4 hour sessions from 6:00 to 10:00 pm DATES: First Semester begins Wednesday September 11, 2013 thru January 15, Second Semester starts Wednesday January 22, 2014 thru May 21, 2014 LOCATION: Colorado Springs INSTRUCTORS: Mike Mason, NOTE: Welding personnel protective equipment (Hood, leathers, gloves and safety glasses) must be supplied by student. All other supplies furnished by JATC. Page 11

12 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30, 2013 to be eligible for participation in classes COURSE TITLE: WELDING (Grand Junction) PREREQUISITE: None COURSE DESCRIPTION: The Grand Junction school is a certified welding lab. So there is potential for the student to become certified in several different facets of the welding industry. This class will be flexible and will allow the student to gain experience in the welding area of their choice. Please indicate your welding experience on the Continuing Education Form (Green Sheet) and the type of welding that you are interested in.. LENGTH OF COURSE: 40 hours, either on Fridays or Saturdays for five classes. CLASS SIZE: To be determined by response. LOCATION: Grand Junction INSTRUCTORS: Steve Flori. And Travis Lancaster NOTE: Welding personnel protective equipment (Hood, leathers, gloves and safety glasses) must be supplied by student. All other supplies furnished by JATC. COURSE TITLE: RESIDENTIAL SHEET METAL PREREQUISITE: None COURSE DESCRIPTION: This Course will encompass all facets of the residential sheet metal industry from new construction installer, residential retrofit, and Residential HVAC service. COURSE LENGTH: 128 Hours/ Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. DATES: Starting Wednesday 9/11/2013 thru 5/14/2014 in Denver, and starting Thursday 9/12/2013 thru 5/15/2014 in Colorado Springs. CLASS SIZE: Class size is limited. Entry is based on first sign in first to receive class. LOCATIONS: Denver, Colorado Springs INSTRUCTORS: Phillip Adame (Den), TBD (CS) Page 12

13 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: ARCHITECTURAL SHEET METAL COURSE DESCRIPTION: This Curriculum teaches student several areas of Architectural Work. Also covered in this curriculum are specialized layout, fabrication and field installation techniques specific to the Architectural industry. The student will also learn about types of materials and tools used in this industry. LENGTH OF COURSE: 128 hours, Each session is 4 hours, from 6:00 to 10:00 pm. DATES: Mondays starting 9/9/2013 thru 5/5/2014 in Denver and Colorado Springs CLASS SIZE: limited to 20 students, so it is first signed in first given LOCATION: Denver, Colorado Springs INSTRUCTORS: Ed Mangusso (Den), Jason Leblanc CS If Class size is under five students class will not be held COURSE TITLE: NEW ITI CALCULATOR CLASS PREREQUISITE: None COURSE DESCRIPTION: This course will cover the functions of the new ITI calculator, which include, Test and Balancing Functions, Construction math, Laws of Cosines, Offset Functions, Memory Storage, ArcK, Memory Swap, and order of operations calculation. LENGTH OF COURSE: 16 Hours/ each session is four hours. CLASS SIZE: To be determined by response. FEES: $54.25 for Calculator. LOCATION: Denver, Colorado Springs, Grand Junction INSTRUCTORS: TBD (Denver), Chris Gibson ( CS), Travis Lancaster (GJ) ATTENDANCE: IF 100% attendance fee will be refunded Page 13

14 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30,2013 to be eligible for participation in classes COURSE TITLE: INDUSTRIAL SHEET METAL 1 PREREQUISITE: None COURSE DESCRIPTION : This Curriculum teaches students a variety of welding processes. Also included in this curriculum the student will learn about the different types of systems, materials and equipment found in industrial work and the special procedures used to layout, fabricate and install these systems. LENGTH OF COURSE: 128 hours. Each session is 4 hours, from 6:00 to 10:00 pm. DATES: Tuesdays 9/10/2013 thru 5/20/2014 in Denver and Thursdays 9/12/2013 thru 5/22/2014 in Colorado Springs. CLASS SIZE: limited to 20 students, so it is first signed in first given. LOCATION: Denver, Colorado springs. INSTRUCTORS : Kevin Mostacciuolo & Chase Bergeron (Denver), Mike Mason (Colorado Springs) COURSE TITLE: INDUSTRIAL SHEET METAL 2 PREREQUISITE: Industrial Sheet Metal 1 COURSE DESCRIPTION: This Curriculum teaches students a bigger variety of welding processes. As well as different cutting processes. The students will also get to work with common materials used in real world applications. Also included in this curriculum the student will learn about the different types of systems found in industrial work and the special procedures used to layout, fabricate and install these systems. LENGTH OF COURSE: 128 hours. Each session is 4 hours, from 6:00 to 10:00 pm. DATES: Tuesdays 9/10/2013 thru 5/20/2014 in Denver, and in Colorado Springs CLASS SIZE: limited to 20 students, so it is first signed in first given. LOCATION: Denver, Colorado springs. INSTRUCTORS: Kevin Mostacciuolo & Chase Bergeron (Denver), Mike Mason (Colorado Springs) Page 14

15 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: INDUSTRIAL SHEET METAL 3 PREREQUISITE: Industrial Sheet Metal 2 COURSE DESCRIPTION: This Curriculum expands on what's learned in the Industrial 2 class. LENGTH OF COURSE: 128 hours. Each session is 4 hours, from 6:00 to 10:00 pm. DATES: Tuesdays 9/10/2013 thru 5/7/2014 in Denver, and Wednesdays 9/11/2013 thru 5/21/2014 in Colorado Springs. CLASS SIZE: limited to 20 students, so it is first signed in first given. LOCATION: Denver, Colorado springs. INSTRUCTORS: Kevin Mostacciuolo & Chase Bergeron (Denver), Mike Mason (Colorado Springs) COURSE TITLE: FOREMAN TRAINING COURSE DESCRIPTION: Communication skills, plans and specs, take off, cut sheets and technical paperwork are reviewed. LENGTH OF COURSE:16 HOURS. CLASS SIZE: To be determined by response. LOCATIONS: Denver, Colorado Springs and Grand Junction IINSTRUCTORS: TBD (D), Roy Gibson (CS), Travis Lancaster (GJ) COURSE TITLE: READING PLANS AND SPECIFICATIONS PREREQUISITE: None COURSE DESCRIPTION: This course is a comprehensive look at a complete set of drawings from structural, architectural, mechanical and electrical. This course also covers submittals, change orders, and shop drawings. LENGTH OF COURSE: 60 Hours, each session is from 6:00 pm to 10:00 pm. CLASS SIZE: To be determined by response. LOCATION: Denver, Colorado Springs, Grand Junction INSTRUCTORS: TBD (Denver), Chris Gibson (CS), Travis Lancaster (GJ) Page 15

16 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30,2013 to be eligible for participation in classes COURSE TITLE: FIRE LIFE SAFETY LEVEL 1 PREQUISITE: None COURSE DESCRIPTION: This emerging certification from the ITI is to provide the consideration for installation, inspection and maintaining fire dampers, smoke dampers and combination dampers in new and existing HVAC Systems. The course will cover the manufacture requirements, the relevant building codes and prepare the individual for the certification test. Possible National Code Enforcement in coming years that only certified individuals install, inspect and maintain the dampers in the HVAC System. LENGTH OF COURSE: 32 hours CLASS SIZE: To be determined by response. INSTRUCTOR: Joshua Uncapher LOCATION: Denver COURSE TITLE: FIRE LIFE SAFETY LEVEL 2 PREQUISITES: Fire Life Safety 1 or TAB background preferred. COURSE DESCRIPTION: This emerging certification from the ITI is to provide the knowledge for the inspections, service and follow up inspections of the mechanical smoke control systems. There are two main categories of mechanical smoke management systems that are either pressurized or exhausted. This course will cover the features and components of both systems, smoke control barriers and the relationships of inhibiting or controlling the smoke management during a fire event. LENGTH OF COURSE: 32 hours CLASS SIZE: To be determined by response. INSTRUCTOR: Joshua Uncapher LOCATION: Denver Page 16

17 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes COURSE TITLE: INDOOR AIR QUALITY PREQUISITES: TAB background preferred. COURSE DESCRIPTION: This course is part of the ITI certification program for technicians relating to IAQ in buildings. IAQ in a building is important because the condition of the air affects comfort, health, productivity and well being of people in the building. If the condition of the air is unacceptable complaints and even law suits can result. This course will overview the knowledge and skills that are needed to assist customers in improving and maintaining IAQ in their buildings. Certification Test offered at the end of the course for those who want to apply. LENGTH OF COURSE: 32 hours CLASS SIZE: To be determined by response. INSTRUCTOR: Joshua Uncapher LOCATION: Denver COURSE TITLE: HVAC ENERGY AUDIT & TOTAL BUILDING AUDIT PREQUISITES: TAB background preferred. COURSE DESCRIPTION: This emerging certification from the ITI is to provide the knowledge base for auditing HVAC and building systems. Energy use has became a major concern for individuals, business and governments. Every building uses energy to power HVAC systems, lighting and electrical equipment, this course will overview the knowledge and skills needed to enter and work in the green sector efficiently. Certification Test offered at the end of the course for those who want to apply. LENGTH OF COURSE: 128 Hours. Each Session is 4 hours from 6:00 p.m. to 10:00 p.m. CLASS SIZE: To be determined by response. INSTRUCTOR: Joshua Uncapher LOCATION: Denver Page 17

18 To enroll in classes you must contact (via or phone) the Local area apprenticeship program no later than August 30,2013 to be eligible for participation in classes BELOW IS A LIST OF CLASSES THAT CAN BE OFFERED WITH ADVANCED NOTICE AS WELL AS SUFFICIENT RESPONSE: (Call Your nearest JATC for specifics of each class) 1. Medic/ First Aid (8 hour course) 2. Medic/ First aid recertification 3. Hazard Communication Standards (This is a 40 hour course taught by SMOHIT so a minimum of 10 students is required and you must also take time from work for this class.) hour OSHA ( 100 % attendance required for certification) hour OSHA (100% attendance is required for Certification) 6. Project Management ( 16 hour course) 7. Hoisting and Rigging ( 8 hour course taught by the Operating Engineers. A certificate will be received after completion of course.) 8. Crane Signaling 9. Basic Layout and fabrication techniques. 10. Advanced Layout and fabrication techniques. 11. Supervisory Training 12. Estimating 13. TABB Supervisory Training 14. Welding Certification Page 18

19 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes ALL CLASSES CONTAINED IN THIS CATALOG ARE OFFERED IN BOTH THE DENVER AND COLORADO SPRINGS SCHOOLS EXCEPT THOSE THAT ARE NOTED. It is the belief of both the Contractors as well as the Union that we at Sheet Metal Workers Local #9 are some of the best trained Sheet Metal Workers in the country and the only way we can remain that way is to continue our education and not become complacent. The members pay for these Training Centers and should utilize the training at hand. If you have any suggestions for other courses please do not hesitate to call me at to discuss these classes. Fraternally, John Fleck John Fleck Training Director Colorado Sheet Metal Workers Training Institute. Page 19

20 Colorado Sheet Metal Workers Training Institute Continuing Education/Upgrade Classes Denver Training Center 1515 W 47th Ave Denver, CO Phone: Fax: [email protected] Colorado Springs Training Center 1420 Quail Lake Loop Colorado Springs, CO Phone: ext. 11 Fax: [email protected] Grand Junction Training Center 810 N Crest Dr Unit 6 Grand Jct, CO Phone : Fax: [email protected]