PDQ HINGE SUGGESTED ARCHITECTURAL SPECIFICATIONS METICULOUSLY MANUFACTURED, THE PDQ HINGE IS AVAILABLE IN 3 BASE METALS: SPECIFICATIONS HINGE SERIES

Transcription

1 Commercial Hinges

2 PDQ HINGES PDQ wants to be your total one source supplier of contract hardware materials. The introduction of a high quality PDQ hinge is another step in this direction. PDQ hinges are available in several finishes including, 626, 605, and 630. SUGGESTED ARCHITECTURAL SPECIFICATIONS Available in plain bearing, ball bearing and heavy duty ball bearing, these hinges are independently tested and meet ANSI/BHMA A , based on grade of hinge. Our spring hinges are UL listed. METICULOUSLY MANUFACTURED, THE PDQ HINGE IS AVAILABLE IN 3 BASE METALS: STEEL Wrought Steel is durable yet corrosive. Best if used on interior applications where temperature and humidity are controlled. Steel ball bearing hinges may be used on fire rated openings. BRASS Wrought Brass is rust resistant and decorative. Apply brass hinges where appearance is of great concern yet humidity is also a factor. Brass hinges may not be used on fire rated openings. STAINLESS STEEL Stainless Steel Types 302/304 is rust resistant, durable and decorative. Apply stainless hinges on highly corrosive areas such as chemical storage, seacoast, or industrial areas where acids or atmospheric conditions exist. Stainless steel ball bearing hinges may be used on fire rated openings. SPECIFICATIONS HINGE SERIES CERTIFICATION: PDQ hinges meet the requirements of ANSI/BHMA A156.1 Section 4.1. All PDQ hinges have a base material of Wrought Steel, Stainless Steel, or Wrought Brass. Since each material has different characteristics it is essential that the correct hinge be used in each application. PDQ Hinges are Cycle tested in accordance with ANSI/BHMA A for one of the following Grades: Grade 1, Heavy Weight Ball Bearing Hinge (HB) for 2,500,000 cycles Grade 2, Ball Bearing Hinge (BB) for 1,500,000 cycles Grade 3, Plain Bearing Hinge (PL) for 350,000 cycles PDQ HINGE WARRANTY: Ten (10) year limited warranty SCREWS All hinges include AMS (All Machine Screws) and AWS (All Wood Screws). AMS (All Machine Screws) AWS (All Wood Screws)

3 STOCK HINGE DETAILS & ANSI CROSS REFERENCE PDQ HINGE MODEL ANSI NUMBER STYLE SIZE FREQUENCY WEIGHT THICKNESS SWAGING BASE MATERIAL OPTIONS FULL MORTISE HINGES 35STPL A8184 PL 4.0 x 4.0 LOW STANDARD LEAVES STEEL (P) 35STPL A8183 PL 4.0 x 4.0 LOW STANDARD LEAVES STEEL (26D) 35STPL A8133 PL 4.5 x 4.5 LOW STANDARD LEAVES STEEL (P) 35STPL A8133 PL 4.5 x 4.5 LOW STANDARD LEAVES STEEL (26D) 35STPL A8133 PL 4.5 x 4.5 LOW STANDARD LEAVES STEEL (3) 35STPL A8133 PL 4.5 x 4.5 LOW STANDARD LEAVES STEEL (10B) 35STPL NRP A8133NRP PL 4.5 x 4.5 LOW STANDARD LEAVES STEEL NRP 652 (26D) 35STBB A8112 BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STEEL (P) 35STBB A8112 BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STEEL (26D) 35STBB A8112 BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STEEL (3) 35STBB A8112 BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STEEL (10B) 35STBB NRP A8112NRP BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STEEL NRP 652 (26D) 35BRBB A2112 BB 4.5 x 4.5 MEDIUM STANDARD LEAVES BRASS (26D) 35BRBB NRP A2112NRP BB 4.5 x 4.5 MEDIUM STANDARD LEAVES BRASS NRP 626 (26D) 35SSBB A5112 BB 4.5 x 4.0 MEDIUM STANDARD LEAVES STAINLESS STEEL 35SSBB A5112 BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STAINLESS STEEL 35SSBB NRP A5112NRP BB 4.5 x 4.5 MEDIUM STANDARD LEAVES STAINLESS STEEL FINISH (32D) (32D) NRP 630 (32D) 35STHB A8111 HB 4.5 x 4.5 HIGH HEAVY LEAVES STEEL (P) 35STHB A8111 HB 4.5 x 4.5 HIGH HEAVY LEAVES STEEL (26D) 35STHB A8111 HB 4.5 x 4.5 HIGH HEAVY LEAVES STEEL (3) 35STHB A8111 HB 4.5 x 4.5 HIGH HEAVY LEAVES STEEL (10B) 35STHB NRP A8111NRP HB 4.5 x 4.5 HIGH HEAVY LEAVES STEEL NRP 652 (26D) 35SSHB A5111 HB 4.5 x 4.5 HIGH HEAVY LEAVES STAINLESS STEEL (32D) 35SSHB NRP A5111NRP HB 4.5 x 4.5 HIGH HEAVY LEAVES STAINLESS STEEL NRP 630 (32D) SPRING HINGES 35STSH K8107-1F SH 4.5 x 4.5 MEDIUM STANDARD LEAVES STEEL (26D) Please check our Electromechanical brochure for electrified hinges HOW TO ORDER SERIES STYLE FINISH Hinge Series PL Plain Brearing BB Ball Bearing HB Heavy Duty Ball Bearing SH Spring Hinge 600 (P) Prime Coated 605 (3) Bright Brass on Brass 632 (3) Bright Brass on Steel 613 (10B) Oil Rub Bronze on Brass 640 (10B) Oil Rub Bronze on Steel 626 (26D) Satin Chrome on Brass 652 (26D) Satin Chrome on Steel 630 (32D) Satin Stainless Steel 35 ST PL NRP ST Steel BR Brass SS Stainless Steel X /2 X /2 X 4-1/2 NRP Non Removable Pin MATERIAL SIZE OPTIONS See chart above for stock items. Other sizes and styles are available by special order. Consult factory for details.

4 REQUIRED NUMBER OF HINGES On doors up to 5' (1.52m) use two hinges and an additional hinge for each additional 2.5' (.76m) or fraction thereof. HINGE LOCATIONS ON DOOR Top hinge 5" (127mm) from frame rabbet to top of hinge barrel. Bottom hinge 10" (254mm) from bottom edge of hinge barrel to finished floor. Center third hinge between top and bottom hinges. 5" (127mm) Equal Equal For use with doors up to 2-1/4 (57mm) thick 5/16 (8mm) Backset NOTE: This information is for reference only. Actual placement may vary according to applicable code requirements for your location. 10" (254mm) COMMON BACKSET 1/4 (6.4mm) For doors up to 2-1/4 (57mm) thick HINGE TYPES FULL MORTISE DOORS Solid Core Wood Hollow Metal Mineral Core Wood Doors with minimum 3/4" Edge Style FRAMES Wood Hollow Metal HALF MORTISE DOORS Solid Core Wood Hollow Metal FRAMES Channel Iron Tubular HALF SURFACE DOORS Hollow Core Wood Mineral Core Wood Doors with minimum 3/4" Edge Style FRAMES Wood Hollow Metal FULL SURFACE DOORS Hollow Core Wood Kalamein FRAMES Channel Iron Tubular NOTE: All PDQ Stock Hinges are Full Mortise please contact factory for availability of other styles.

5 HINGE WIDTH DOOR THICKNESS CLEARANCE REQUIRED WIDTH OF HINGE IN OPEN POSITION INCHES MM INCHES MM INCHES MM 1-3/8" /4" 1-3/4" /2" 4" /4" " 1-1/2" 2" 3" " 4-1/2" 5" 6" " " 1-1/2" 2-1/2" /2" 5" 6" /4" " 2" " 6" /2" /4" 1-3/4" " 6" " /4" 2-3/4" 4-3/4" " 8" 10" HINGE WIDTH FORMULA Calculation to determine hinge width requirements for extra clearance Take thickness of door - (subtract) backset x (multiply) 2 + (plus) inset (if applicable) = (equals) hinge width. If the resulting value does not match a standard hinge width, use the next larger hinge (width). Face of Frame Backset Dimension Door Thickness Dimension Clearance Dimension Inset Dimension Door Thickness Dimension Door In Open Position

6 TYPICAL DOOR WEIGHTS DOOR THICKNESS DOOR MATERIAL INCHES MM INCHES MM INCHES MM 1-3/8" /4" " 50.8 lbs/ft 2 kg/m 2 lbs/ft 2 kg/m 2 lbs/ft 2 kg/m 2 Ash Birch Fir Mahogany Oak White Pine Hollow Core Particle Core Solid Core Kalamein Mineral Core Lead Lined Wood w/ 1/16" thick lead Lead Lined Wood w/ 1/8" thick lead Lead Lined Wood w/ 3/16" thick lead Lead Lined Wood w/ 1/4" thick lead Lead Lined Wood w/ 3/8" thick lead Lead Lined Wood w/ 1/2" thick lead Hollow Metal 18 gauge Hollow Metal 16 gauge Hollow Metal 15 gauge Hollow Metal 14 gauge Hollow Metal 13 gauge Hollow Metal 12 gauge Hollow Metal 11 gauge Hollow Metal 10 gauge The above chart indicates approximate weights for common door types. These estimations do not include the additional weight of any door hardware.

7 BUILDING TYPE/OPERATIONAL FREQUENCY TYPE OF BUILDING TYPE OF USE/FREQUENCY STANDARD DUTY HEAVY DUTY EXTRA HEAVY DUTY BEDROOM APARTMENT BUILDING BUILDING ENTRANCE CLOSET/STORAGE HALLWAY/STAIRWELL MAIN ENTRANCE RESTROOM UNIT ENTRANCE DORMITORY BEDROOM BUILDING ENTRANCE CLOSET/STORAGE HALLWAY/STAIRWELL RESTROOM UNIT ENTRANCE CLOSET HOTEL/MOTEL HALLWAY/STAIRWELL RESTROOM UNIT ENTRANCE UTILITY/STAFF HOSPITAL/NURSING CARE BUILDING ENTRANCE CLOSET/STORAGE HALLWAY/STAIRWELL KITCHEN/FOOD PREPARATION PATIENT ROOM RESTROOM REHABILITATION/RECREATION SURGICAL/EXAM UTILITY/STAFF

8 BUILDING TYPE/OPERATIONAL FREQUENCY (CONT.) TYPE OF BUILDING TYPE OF USE/FREQUENCY STANDARD DUTY HEAVY DUTY EXTRA HEAVY DUTY DOCKS/STORAGE ENTRANCE INDIVIDUAL OFFICE(S) MALL/RETAIL STORE RESTROOM UTILITY/EQUIPMENT ENTRANCE/EXIT PRODUCTION MANUFACTURING/INDUSTRIAL DOCKS OFFICE(S) RESTROOM TOOL ROOM UTILITY/EQUIPMENT PROFESSIONAL OFFICE BUILDING CLOSET/STORAGE ENTRANCE HALLWAY/STAIRWELL INDIVIDUAL OFFICE(S) RESTROOM UTILITY/EQUIPMENT SCHOOL/COLLEGE/UNIVERSITY CAFETERIA/KITCHEN CLASSROOMS CLOSET/STORAGE ENTRANCE/EXIT HALLWAY/STAIRWELL GYMNASIUM RESTROOM UTILITY/EQUIPMENT

9 CROSS REFERENCE HINGE DESCRIPTION PDQ ANSI BOMMER HAGER MCKINNEY PBB STANLEY Plain Bearing Steel 35STPL A T2714 PB81 F179 Ball Bearing Steel 35STBB A8112 BB5000 BB1279 TA2714 BB81 FBB179 Ball Bearing Brass 35BRBB A2112 BB5001 BB1191 TA2314 BB21 FBB191 Ball Bearing Stainless 35SSBB S5112 BB5002 BB1191 (630/32D) TA2314 (630/32D) BB51 FBB191 (630/32D) Ball Bearing, Heavy Weight Steel 35STHB A8111 BB5004 BB1168 T4A3786 4B81 FBB168 Ball Bearing, Heavy Weight Stainless 35SSHB A5111 BB5006 BB1199 T4A3386 4B51 FBB199 Spring Hinge, Self Closing Steel 35STSH K8107-1F LB4310C SP R HINGE SELECTION FOR LABELED FIRE DOORS Reproduced with Permission from NFPA , Fire Doors and Other Opening Protectives, Copyright 2009, National Fire Protection Association. This reprinted material is not the complete and official position of NFPA on the referenced subject, which is represented only by the standard in its entirety * Builders Hardware Hinges. Hinges shall be as specified in individual door manufacturer s published listings or Table Doors up to 60 in. (1.52 m) in height shall be provided with two hinges and an additional hinge for each additional 30 in. (076 m) of door height or fraction thereof The distance between hinges shall be permitted to exceed 30 in (0.76 m) Where spring hinges are used, at least two shall be provided All hinges or pivots, except spring hinges, shall be of the ball bearing type Hinges or pivots employing other anti-friction bearing surfaces shall be permitted if they meet the requirements of ANSI/BHMA A156.1, Standard for Butts and Hinges Spring hinges shall be labeled and shall meet the requirements of ANSI/BHMA A156.17, Standard for Self Closing Hinges & Pivots, Grade Hinges 4 1/2 in. (114 mm) high and in. (4.57 mm) thick shall be permitted for use on wide and heavy doors or doors that are subjected to heavy use or unusual stress Fire doors with hinges of lighter weight that are not of the ball bearing type shall be permitted under the following conditions: 1. They are part of a listed assembly. 2. They meet the test requirements of ANSI/BHMA A156.1, Standard for Butts and Hinges. 3. They have been tested to a minimum of 350,000 cycles Pivot sets made up of components that are smaller or of a lighter gauge than shown in Table shall be permitted to be used, provided they meet the requirements of ANSI/BHMA A156.4, Standard for Door Controls (Closers), and are in accordance with the manufacturer s label service procedures.

10 HINGE SELECTION FOR LABELED FIRE DOORS (CONT.) Attaching Hinges to Doors Hinges shall be secured in accordance with the listing and the manufacturer s installation instructions Mortise hinges shall be secured to reinforcements in the doors with steel machine screws Mortise hinges shall be secured to wood and plastic-covered composite doors or wood core doors with No. 12 x 1 1/4 in. (31.75 mm) flat, threaded-to-the-head, steel wood screws. Pilot holes shall be drilled that are 5/32 in. (4 mm) in diameter Surface hinges shall be attached with steel through-bolts Attaching Hinges to Frames. Hinges shall be secured to frames with steel screws Types of screws shall be permitted to vary depending on material use for the manufacture of labeled door frames. Table Builders Hardware Mortise, Surface, and Full Length Hinges, Pivots, or Spring Hinges for Swinging Doors DOOR RATING (HR) MAXIMUM DOOR SIZE WIDTH HEIGHT MINIMUM HINGE SIZE WIDTH THICKNESS HINGE TYPE FOR IN. (44.5-MM) OR THICKER DOORS 3 or Less 4 ft. (1.22m) 10 ft. (3.05m) 4.5 in. (114.3mm) in. (4.57mm) Steel, mortise or surface 3 or Less 4 ft. (1.22m) 8 ft. (2.44m) 4.5 in. (114.3mm) in. (3.40mm) Steel, mortise or surface 1-1/2 or Less ft. (0.96m) 8 ft. (2.44m) 6 in. (152.4mm) in. (5.72mm) Steel, olive knuckle or paumelle 3 or Less 4 ft. (1.22m) 10 ft. (3.05m) 4 in. (101.6mm) in. (5.72mm) Steel pivots (including top, bottom, and intermediate) 1-1/2 or Less 3 ft. (0.91m) 5 ft. (1.52m) 4 in. (101.6mm) in. (3.30mm) Steel, mortise or surface 1-1/2 or Less 2 ft. (0.61m) 3 ft. (0.91m) 3 in. (76.2mm) in. (2.34mm) Steel, mortise or surface 3 or Less 3 ft. (0.91m) 7 ft. (2.13m) 4.5 in. (114.3mm) in. (3.40mm) 3 or Less 3 ft. (0.91m) 7 ft. (2.13m) 4 in. (101.6mm) in. (2.67mm) Steel mortise or surface (labeled, self closing, spring type) Steel mortise or surface (labeled, self closing, spring type) FOR IN. (34.93-MM) OR THICKER DOORS 3 or Less 3 ft. (0.91m) 7 ft. (2.13m) 3.5 in. (88.9mm) in. (3.12mm) Steel, mortise or surface 3 or Less ft. (0.81m) 7 ft. (2.13m) 3.5 in. (88.9mm) in. (2.67mm) Steel mortise or surface (labeled, self closing, spring type) The manufacturer s instructions and published listings for labeled door frames shall be referenced for specific screw requirements Shimming. When required to meet the clearances stated in , the shimming of hinges using steel shims shall be permitted.

11 CARE AND MAINTENANCE PDQ hinges are either zinc plated or copper plated prior to the final finishing. Plated finishes are all well lacquered to delay oxidation of the finish. For a BHMA specification category, a PDQ hinge will meet or exceed BHMA requirements - gauge of metal, hinge size supporting specified door weight, type of finish. PDQ works with Warnock Hershey and UL Labs to assure the highest quality. Special Milling of knuckles at all bearing surfaces ensures proper seating of the bearing surface. The streamline design of PDQ s five-knuckle series, meets the demands of todays architectural standards without sacrificing quality, strength, serviceability, or price. BEARINGS PDQ s ball bearing hinges are available with two bearings (BB) or four bearings (HB). Four-bearing hinges are needed to provide continued floating silent service for large, thick heavy doors or doors receiving frequent use. PDQ s complete line of slim, modern hinges is designed to match the needs of contemporary architecture. These fine precision crafted hinges represent our dedication to progress and our pledge to constantly provide the best in quality and style. BALL BEARING ASSEMBLIES HAVE BEEN: Designed to conform to the circumference of the barrel, thus giving a clean, slim appearance to the hinge Engineered to provide dependable, permanent service

12 PO Box Creek Hill Road Leola PA Fax PDQ's Hinge Brochure is printed on Forest Stewardship Council certified paper. FSC Certification ensures that the paper used in this catalog contains fiber from well-managed and responsibly harvested forests that meet strict environmental and socioeconomic standards. Weʼre proud to be one of the first hardware manufacturers in the country to make this significant move to help our environment. The FSC logo on our brochure signals not only FSC Certification, but also PDQʼs commitment to improving the environment PDQ Industries LT K Printed in the United States of America