Technical Data Contents
|
|
|
- Cecilia Heath
- 6 years ago
- Views:
Transcription
1 Contents Dry Cylinder Compressors with Crosshead Series TE - 1-stage design, up to 7 bar(g) Series TZ - 2-stage design, up to 15 bar(g) Series TE/TZ - Dimensions Series TE/TZ - Tables of weights Series TE/TZ - Dimensional drawings Dry Cylinder Compressors without Crosshead Series AT/AVT - inal pressure 7 bar(g) Series AT/AVT - inal pressure, intermittent (approx. 50% operating factor), 10 bar(g) Series AT/AVT - Weights and volumes Series AT/AVT - Dimensions Series AT/AVT - Dimensional drawings Dry Cylinder Compressors in V-Shape Series 800 Josef Mehrer GmbH & Co, Maschinenfabrik P.O.Box , D Balingen Rosenfelder Straße, D Balingen Tel. +49 (74 33) ax +49 (74 33) info@mehrer.de Dry Running Screw Compressors Series BSTL - Aircooled Series BSTW - Watercooled NAVIGATION [ Next Page ]
2 Dry Cylinder Compressors TE Single-stage Design, up to 7 bar(g) name aggregate name compressor Cylinder bores Piston stroke (-d = double-acting) Nominal RPM low rate as per VDMA 4362 bez. a. 1 bar (abs) u. 20 C Power requirement at motor shaft Motor power [mm] [mm] [ 1 /min] at 3 bar(g) [m 3 /h] at 6 bar(g) [m 3 /h] at 3 bar(g) [kw] at 6 bar(g) [kw] [kw] TEL 50-3 TEL 60-4 TEL 70-5,5 TEW 70-5,5 TEL TEW TEL TEW 90-18,5 TEW TEW TEW TEW TEL 50 TEL 60 TEL 70 TEW 70 TEL 80 TEW 80 TEL 80 TEW 90 TEW 90 TEW 110 TEW 110 TEW /80 90/90 110/ / / / / / / / / / d 1-d 1-d ,5 29,2 44,5 44, ,6 24,5 37,6 37, ,0 2,5 4,5 4,5 8,5 8,5 11,5 13,8 15,3 20,2 25,1 32,2 2,7 3,5 5,4 5,4 10,5 10,5 14,2 18,3 20,1 27,6,1, ,5 5, , Compressor cooling fan air water l l l l l l l l l l l l Cooling water requirement 1 ) compressor [I/h] aftercooler [I/h] Drive: V-belt pulley, compressor; diameter a grooves x profile DIN 7753 Contents of standard receiver Contents of receiver of idle run add. control Weights and volumes: Compressor with V-belt pulley Complete aggregate [mm] [I] [I] net approx. [kg] gross approx.[kg] m³ approx. [m³] net approx. [kg] gross approx. [kg] m³ approx.. [m³] x SPA 2 x SPA 2 x SPA 2 x SPA 2 x SPC 2 x SPC 2 x SPC 2 x SPC 2 x SPC 4 x SPC 4 x SPC 4 x SPC ,14 0,32 0,4 0,4 0,55 0,55 0,55 1,1 1,1 1,2 1,2 1, O,6 1,2 1,3 1,3 2,2 2,2 2,2 2,7 2,7 3,3 3,3 3,3 l Standard impossible 1 ) cooling water inlet approx. 10 C, outlet at compressor approx. C, air outlet temp. at aftercooler approx. 30 C; standard adjustment of 1-stage compressor: 4 bar ON/6 bar O 2 stage compressor: 11 bar ON/15 bar O
3 Dry Cylinder Compressors TZ Two-stage Design, up to 15 bar(g) name aggregate name compressor Cylinder bores Piston stroke (-d = double-acting Nominal RPM low rate as per VDMA 4362 bez. a. 1 bar (abs) u. 20 C Power requirement at motor shaft Motor power [mm] [mm] [ 1 /min] at 10 bar(g) [m 3 /h] at 15 bar(g) [m 3 /h] at 10 bar(g) [kw] at 15 bar(g) [kw] [kw] TZL 10-2,2 TZL 20-4 TZL 30-5,5 TZL -11 TZW TZW TZW 60-18,5 TZW TZW TZW TZW TZW TZL 10 TZL 20 TZL 30 TZL TZW 50 TZW 50 TZW 60 TZW 60 TZW 60 TZW 70 TZW 70 TZW 70 80/45 100/65 120/65 130/65 170/80 170/80 220/ / / / / / d 1-d 1-d ,9 17,0 21,5 52, , ,75 16,3 20,4 52, , , ,9 3,5 4,9 10,0 9,7 13,3 15,5 18,2 25, ,15 3,95 5,5 11,0 11,0 15,0 18,5 22,0 29,9 36,7 44,8 54,5 2,2 4 5, , Compressor cooling fan air water l l l l l l l l l l l l Cooling water requirement 1 ) compressor [I/h] aftercooler [I/h] Drive: V-belt pulley, compressor; diameter a grooves x profile DIN 7753 Contents of standard receiver Contents of receiver of idle run add. control Weights and volumes: Compressor with V-belt pulley Complete aggregate [mm] [I] [I] net approx. [kg] gross approx.[kg] m3 approx. [m³] net approx. [kg] gross approx. [kg] m 3 approx. [m³] x SPA 2 x SPA 2 x SPA 2 x SPC 2 x SPC 2 x SPC 4 x SPC 4 x SPC 4 x SPC 4 x SPC 4 x SPC 4 x SPC ,14 0,32 0,32 0,55 0,7 0,7 1,25 1,25 1,25 1,65 1,65 1, ,6 1,0 1,0 2,1 2,5 2,5 3,25 3,3 3,3 4,5 4,5 4,5 l Standard impossible 1 ) cooling water inlet approx. 10 C, outlet at compressor approx. C, air outlet temp. at aftercooler approx. 30 C; standard adjustment of 1-stage 2 ) Compressor with intercooler
4 Dry Cylinder Compressors TE/TZ Table of Weights for Standard Compressed Air Receivers Receiver [I] 7 bar(g), net approx. [kg] gross approx. [kg] bar(g), net approx. [kg] gross approx. [kg] bar(g), net approx. [kg] gross approx. [kg] Dimensions (receiver armoured) ø x I [mm] x1360 x1900 x1800 x2250 x20 x2550 x22 x32 x2810 x3310 x3110 x3910 x4410 x4650 x5550 All dimensions in mm; constructional and dimensional changes reserved!
5 Dry Cylinder Compressors TE/TZ Table of Weights for Standard Compressed Air Receivers TE TE a b TE TE TE TE TE TE TE TE TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ 70-5, , , , , c 1150* 1300* * 1750* 1750* 1750 * 1750* 18* 18 * 18* 1210* 10* 10* 1750* 1750* 1750* 1750* 1750* 1750* 1900* 1900* 1900* d e f ø g h i k ø l m n G 3 /4 G 3 / G 1 G 1 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 3 /4 G 3 /4 G 1 G 1 G 1 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 1 1 /2 G 1 1 /2 DN 65 [ Dimensional drawing ] * refer to order
6 Dry Cylinder Compressors TE Dimensional drawing
7 Crossheadless Dry Cylinder Compressors AV/AVT inal pressure 7 bar(g) Compressor Plant Compressor Aggregate Compressor Head Bores/Stroke (mm) AT 25-0,55- AT 25-0,75- AVT 45-1,1- AVT 45-1,5- AVT 55-2,2- AVT D 2-AVT 55-2,2- D 2-AVT HM -HM 50-HM 90-HM 90-HM 150-HM 250-HM 0-HM AT 25-0,55 AT 25-0,75 AVT 45-1,1 AVT 45-1,5 AVT 55-2,2 AVT x AVT 55-2,2 2 x AVT 55-3 AT 25 AVT 45 AVT 55 2 x AVT 55 1 x 65/45 2 x 65/45 3 x 65/45 6 x 65/45 Nominal RPM [min -1 ] Displacement [l/min] low rate as per VDMA 4362, referred to suction of 1 bar(abs.)/20 C: at 3 bar(g) at 6 bar(g) [I/min] [I/min] Compressor flywheel ext. a mm (1 x profile SPZ) x 429 Motor pulley x x Diameter a mm (1 x profile SPZ) x x 190 Motor power (approx min 1 ) [kw] 0,55 0,75 1,1 1,5 2,2 3,0 2 x 2,2 2 x 3,0 Standard Air Receiver [I]
8 Crossheadless Dry Cylinder Compressors AV/AVT inal pressure 10 bar(g), at 50 % intermittent operation factor Compressor Plant Compressor Aggregate Compressor Head Bores/Stroke (mm) AT 25-0,55- AT 25-0,75- AVT 45-1,1- AVT 45-1,5- AVT 55-2,2- AVT D 2-AVT 55-2,2- D 2-AVT HM -HM 50-HM 90-HM 90-HM 150-HM 250 HM 0-HM AT 25-0,55 AT 25-0,75 AVT 45-1,1 AVT 45-1,5 AVT 55-2,2 AVT x AVT 55-2,2 2 x AVT 55-3 AT 25 AVT 45 AVT 55 2 x AVT 55 1 x 65/45 2 x 65/45 3 x 65/45 6 x 65/45 Nominal RPM [min -1 ] Displacement [l/min] low rate as per VDMA 4362, referred to suction of 1 bar(abs.)/20 C at 3 bar(g) at 6 bar(g) at 8 bar(g) [I/min] [I/min] [I/min] Compressor flywheel ext. a mm (1 x profile SPZ) x 429 Motor pulley x x Diameter a mm (1 x profile SPZ) x x 184 Motor power (approx min 1 ) [kw] 0,55 0,75 1,1 1,5 2,2 3,0 2 x 2,2 2 x 3,0 Standard Air Receiver [I]
9 Crossheadless Dry Cylinder Compressors AV/AVT Weights and Volumes Compressor with flywheel w/o separator with separator net approx. (kg) gross approx. (kg) cubage approx. (m 3 ) net approx. (kg) gross approx. (kg) cubage approx. (m 3 ) AT 25 AVT 45 AVT ,07 0,08 0,10 _ _ _ 0,08 0,10 Compressor Aggregate w/o noise absorbing capsule with noise absorbing capsule net approx. (kg) gross approx. (kg) cubage approx. (m 3 ) net approx. (kg) gross approx. (kg) cubage approx. (m 3 ) AT 25-0,55 AT 25-0,75 AVT 45-1,1 AVT 45-1,5 AVT 55-2,2 AVT x AVT 55-2,2 2 x AVT x x x x 155 0,15 0,15 0,23 0,23 0,27 0,27 2 x 0,27 2 x 0, x x x x 2 0,56 0,56 0,98 0,98 0,98 0,98 2 x 0,98 2 x 0,98 Compressor Plant w/o noise absorbing capsule with noise absorbing capsule net approx. (kg) gross approx. (kg) cubage approx. (m 3 ) net approx. (kg) gross approx. (kg) cubage approx. (m 3 ) AT AT AVT 45-1,1- AVT 45-1,5- AVT 55-2,2- AVT D 2-AVT 55-2,2- D 2-AVT HM -HM 50-HM 90-HM 90-HM 150-HM 250-HM 0-HM ,37 0,37 0,59 0,75 0,75 0,93 1,80 2, ,06 1,06 1,61 1,67 1,67 1,96 3,23 3,48
10 Crossheadless Dry Cylinder Compressors AV/AVT Dimensions Standard Compressor Plant [ Dimensional drawing ] Sound Absorbing Capsule Air [l] a b c d e f g h i k l m n AT 25-0,55--HM AT 25-0,75--HM AVT 45-1,1-50-HM AVT 45-1,5-90-HM AVT 55-2,2-90-HM AVT HM D 2-AVT 55-2,2-250-HM D 2-AVT HM Kompressoraggregat [ Dimensional drawing ] Sound Absorbing Capsule Air Receiver a b c d e f g h i k l m n o p q AT 25-0, AT 25-0, AVT 45-1, , AVT 45-1, , AVT 55-2, , as per dimensional sheet # , Compressed Air Receivers AVT , Dimensions in mm; constructional and dimensional changes reserved
11 Crossheadless Dry Cylinder Compressors AV/AVT Dimensional drawing Kompressoranlage
12 Crossheadless Dry Cylinder Compressors AV/AVT Dimensional drawing Kompressoraggregat
13 Dry Running Screw Compressors Series BSTL Air cooled BSTL 45 BSTL 55 BSTL 75 BSTL 90 BSTL 110 BSTL 132 BSTL 160 Operational overpressure [bar(ü)] low Rate 1 [m³/h] Motor power [kw] Motor nominal RPM [min -1 ] Motor protection class Insulation class Motor type of construction [ISO] [IMB] Voltage/requency Cooling air requirement Oil content gear box [m³/h] [l] Compressed air connection Condensate socket G 2" G ¼" G 2" G ¼" G 2" G ¼" Noise level 2 db(a) Dimensions [mm] L B H Weight (approx.) [ca. kg] ) Measured as per CagiPneurop PN 2 CPTC 2 2 ) Outdoor measurement as per CagiPneurop, at 1 m distance at full load; tolerance ± 2 db(a)
14 Dry Running Screw Compressors Series BSTW Water cooled BSTW 45 BSTW 55 BSTW 75 BSTW 90 BSTW 110 BSTW 132 BSTW 160 Operational overpressure [bar(ü)] low Rate 1 [m³/h] Motor power [kw] Motor nominal RPM [min -1 ] Motor protection class Insulation class Motor type of construction [ISO] [IMB] Voltage/requency Cooling water requirement Cooling air Oil content gear box [m³/h] [m³/h] [l] 1, , , , , , Compressed air connection cooling water socket Condensate socket G 2" G 1" G ¼" G 2" G 1" G ¼" G 2" G 1" G ¼" G 1¼" G 1¼" G 1¼" G 1¼" Noise levell² [db(a)] Dimensions [mm] L B H Weight (approx.) [ca. kg] ) Measured as per CagiPneurop PN 2 CPTC 2 2 ) Outdoor measurement as per CagiPneurop, at 1 m distance at full load; tolerance ± 2 db(a)
15 Dry Running V-Compressors, Series 800 Compressor cooling Water low rates for air compression Suction 1 bar(abs)/20oc, counterpressure 15 bar(g) 347 up to 1010 m3/h Crankgear lubrication Gear oilpump: Motor power Motor RPM Oil pressure min./max. Oil filling orce feed 0,37 kw 10 min -1 2/3,5 bar 25 Liter inal pressure for air compression for CO2-compression: Power requirement for aircompression at shaft Standard drive motorprotection class 16 bar(g) 25 bar(g) 47 up to 138 kw IP 23/55 Cylinder bore 1 st stage Cylinder bore 2 nd stage Piston stroke (double acting) 3 mm 160 mm 110 mm Cooling water requirement, incld. aftercooler at inlet 20 C/outlet 45 C: Noise level at full load, measured in 1 m distance as per CagiPneurop 2.2 up to 5.1 m3/h 81 up to 84 db(a) Working speed min/max Standard RPM, direct coupled, at 50 Hz 60 Hz 0 up to 1180 min min min -1 weight of aggregate c/w coolers and motor 160 kw: Weight w/o motor: approx. 4.5 tons approx. 3.4 tons requency when operated by frequency convertor: 20.3 up to 60 Hz 1 ) Measured as per CagiPneurop PN 2 CPTC 2 2 ) Measured outdoors, in 1 m distance at full load, as per CagiPneurop; tolerance ± 2 db(a) Technical changes reserved. or exact data refer to offer. NAVIGATION [ Contents ] [ Previous Page ]
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Atlas Copco Stationary air compressors
Atlas Copco Stationary air compressors Oil-free and oil lubricated piston compressor 2.2 - kw / 3-7.5 hp QUALITY COMPRESSORS DESIGNED SPECIFICALLY FOR THE SNOW MAKING INDUSTRY Atlas Copco's L-range of
Refrigeration Compressed Air Dryer Buran Ultrapulse
Refrigeration Compressed Air Dryer Buran Ultrapulse There is more to compressed air than just compressing air Compressed air is an indispensable source of operating and processing power in all areas of
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
Specifications for Volkswagen Industrial Engine
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
912. The engine for construction equipment.
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
ThermoStar Refrigeration Air Dryers
ThermoStar Refrigeration Air Dryers Why dry compressed air? Contamination Reduces Efficiency The air we breathe contains contamination in the form of water vapour and airborne particles. These problems
1013 E. The engine for agricultural equipment.
1013 E. The engine for agricultural equipment.... -186 kw at 2300 rpm These are the characteristics of the 1013 E: Modern water-cooled 4- and 6-cylinder in-line engine Turbocharging with charge air cooling
Eurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
A E R Z E N E R M A S C H I N E N F A B R I K G M B H AERZEN POSITIVE DISPLACEMENT BLOWERS. for conveying of air and neutral gases for high vacuum
AERZEN POSITIVE DISPLACEMENT BLOWERS for conveying of air and neutral gases for high vacuum A E R Z E N E R M A S C H I N E N F A B R I K G M B H G1-090 01 EN 1000 6.2005 Customers benefit due to technical
2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
Screw Compressors 11-22kW
INDUSTRIALS GROUP Screw Compressors 11-22kW KSA Plus Fixed Speed, KSV Variable Speed Smart and affordable CHAMPION COMPRESSED AIR TECHNOLOGIES KSA Plus Screw Compressors Up to 45 C ambient temperature
ETC -SV. Class 0 oil-free compressed air through catalysis
Innovation QUALITy Reliability Worldwide ETC -SV Class 0 oil-free compressed air through catalysis The way to oil-free compressed air The ETC operating principle Through the process of catalytic oxidation,
4000 Series 4008TAG2A Diesel Engine ElectropaK 947 kwm @ 1500 rpm
The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance
CREATING POWER SOLUTIONS. 2L41C 3L41C 3L43C 4L41C 4L42C 4L43C. Hatz Diesel. www.hatz-diesel.com
CREATING POWER SOLUTIONS. 2L41C 3L41C 3L43C 4L41C 4L42C 4L43C Hatz Diesel EN www.hatz-diesel.com Exhaust gas recirculation (EGR) For years already the Hatz 4L42C has been successfully fitted with a robustly
Vilter 450 XL Compressor For Industrial Refrigeration
Vilter 450 XL Compressor For Industrial Refrigeration 450XL Cross Section Spring Loaded Safety Heads Protect against liquid slugging by relieving internal cylinder pressure if cylinders are subjected to
1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
ThermoSorb Desiccant Dryers
ThermoSorb Desiccant Dryers Sierra Why dry compressed air? Contamination reduces efficiency The air we breathe contains contamination in the form of water vapour and airborne particles. During the compression
32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw
![32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw](/thumbs/30/14614129.jpg "32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw")
,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted
32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw
![32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw](/thumbs/33/15930623.jpg "32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw")
,QGXVWULDO#*HQHUDWRU 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw Generator set consisting of engine and alternator mounted
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
Rotary Screw Compressor. MSM MINI 2,2-3 - 4-5,5 kw
Rotary Screw Compressor MSM MINI 2,2 3 4 5,5 kw EN The MSM Mini Range MINI 2,2 3 4 5,5 kw A solution to satisfy all needs Base Mounted Version Especially recommended for installations near the place of
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
ALLROUNDER 420 C GOLDEN EDITION
Facts and figures ALLROUNDER C GOLDEN EDITION Distance between tie bars: x mm Clamping force: 1 kn Injection unit (acc. to EUROMAP): 29 www.arburg.com C GOLDEN EDITION Machine dimensions 85 33 125 195
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
Oil-Free Screw Compressors. Water-injected Technology. Rely on GD to provide the perfect fit
Oil-Free Screw Compressors Water-injected Technology Rely on GD to provide the perfect fit Why oil-free? Don t compromise on quality If 100% clean and oil-free compressed air is a requirement for your
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
PRO Series. Piston compressor range. Compressed air at your service
PRO Series Piston compressor range Compressed air at your service 2 3 Join the ABAC advantage Since 1980, ABAC offers the right mix of flexibility and experience for the industrial, professional and DIY
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
OIL-FREE ROTARY SCROLL COMPRESSOR. ECOLIFE 1,5 15 kw
OILFREE ROTARY SCROLL COMPRESSOR ECOLIFE 1, 1 kw EN Why The continuous innovation of the compressed air tools and machineries, the evolution of specific productive processes and uses, require exclusively
3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) 100 mhp @ 1200 rpm
Marine Auxiliary Engine SPECIFICATIONS 3304B 56 bkw (75 bhp) 100 mhp @ 1200 rpm Shown with Accessory Equipment I-4, 4-Stroke-Cycle-Diesel Emissions...IMO compliant Displacement... 7.0 L (425 cu. in.) Bore...
Compact Air Solutions C Series 2.2 7.5 kw Screw Compressors Want a 5. year warranty? Ask for details!
Compact Air Solutions C Series 2.2 7.5 kw Screw Compressors Want a 5. year warranty? Ask for details! Air. CompressedAir. BogeAir. Now you can! CM compact module 2.2 7.5 kw Effective free air delivery:
WÄRTSILÄ 50DF PRODUCT GUIDE
WÄRTSILÄ 50DF PRODUCT GUIDE Introduction Introduction This Product Guide provides data and system proposals for the early design phase of marine engine installations. For contracted projects specific
Technical Specification. Generating Set with Waukesha engine burning natural gas
Technical Specification Generating Set with Waukesha engine burning natural gas The following presents the Gas Engine Generating Set (GEGS) APG1000 type, based on Waukesha gas engine 16V150LTD. Using the
BOGE AIR. THE AIR TO WORK. PISTON COMPRESSORS
AIR. THE AIR TO WORK. PISTON COMPRESSORS Over 100,000 compressed air users expect more when it comes to their compressed air supply. air provides them with the air to work. piston compressors are the embodiment
A/C refrigerant system, overview
Page 1 of 19 87-18 A/C refrigerant system, overview A/C refrigerant system, identification Typical A/C refrigerant system with expansion valve and receiver drier 1 - Evaporator 2 - Expansion valve 3 -
C18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
From 6 litres 2 HP To 500 litres 10 HP
PISTON COMPRESSOR From 6 litres 2 P To 500 litres 10 P GB A Long istory of Quality Products 1938 TODAY With about 70 years of experience in piston design and manufacturing, Ceccato Aria Compressa sets
Mechanical Cylinders
Mechanical Cylinders 1 Wormgear 2 Spherical plain bearings 3 Motor flange, IEC-norm 4 Lubricator 5 Air vent 6 Spindle nut 7 Trapezoidal spindle 8 Cylinder tube 9 Piston tube 10 Sealing 11 Wiper 12 Rotation
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM. Key features: NOVAIR quality and service: www.novairmedical.com
MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM Designed for centralized medical air production in hospitals and clinics, NOVAIR medical air stations ensure the continuous supply of the medical gas
Portable Compressors MOBILAIR M 270 With the world-renowned SIGMA PROFILE Free air delivery 20.0 to 26.9 m³/min. www.kaeser.com
Portable Compressors MOBILAIR M 270 With the world-renowned SIGMA PROFILE Free air delivery 20.0 to 26.9 m³/min www.kaeser.com Made in Germany KAESER s renowned MOBILAIR range of portable compressors is
DLW 8. POWER RATING 1500 rpm/50 Hz 1800 rpm/60 Hz Prime 7.5 kva, 6 kw 9.1 kva, 7.3 kw Standby 8.5 kva, 6.8 kw 10.1 kva, 8.1 kw
DLW 8 POWER RATING 1500 rpm/50 Hz 1800 rpm/60 Hz Prime 7.5 kva, 6 kw 9.1 kva, 7.3 kw Standby 8.5 kva, 6.8 kw 10.1 kva, 8.1 kw Generator set consisting of engine and alternator mounted on a fabricated steel
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics ViFlow Finland Oy Kauppakartanontie 7 A 1 00930 Helsinki, Finland tel. +358 40 178 0920 fax +358 9 4789 2800 viflow@viflow.fi www.viflow.fi
MEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free
Full Line-Up of EGS-Series Generator Sets to Meet Your Requirements
Full LineUp of EGSSeries Generator Sets to Meet Your Requirements EGS45BS6 EGS65BS6 EGS120BS8 EGS160BS8 Open Type EGS456 EGS656 EGS1208 EGS1608 1/4 Rated Output Frequency 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
RS-D and RSF-D series with direct drive
RENNER The expert in screw compressors RS-D and RSF-D series with direct drive Made in Germany rs All compresso h available wit ntrol! frequency co Motor size: 95 355 kw The company reliable and dynamic!
1100 Series 1104C-44TAG2 Diesel Engine ElectropaK 99.5 kwm @ 1500 rpm
Building upon Perkins proven reputation within the power generation industry, the Perkins 1100 Series range of ElectropaK engines now fit even closer to the needs of their customers. With this 1104C-44TAG2
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
Screw Compressors ESM 30 132 Fixed Speed & VS 30 132 Variable Speed
Screw Compressors ESM 30 132 Fixed Speed & VS 30 132 Variable Speed Rely on GD to provide the perfect fit The perfect fit to maximise productivity The growing industrial demand for compressed air requires
Air cooled Diesel engines. 2.7-8.8 kw
Air cooled Diesel engines 2.7-8.8 kw KD15 / 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 models in the power range 2.7 to 8.8 kw. Particularly suited to small agricultur
8. ENERGY PERFORMANCE ASSESSMENT OF COMPRESSORS 8.1 Introduction
8. ENERGY PERFORMANCE ASSESSMENT OF COMPRESSORS 8.1 Introduction The compressed air system is not only an energy intensive utility but also one o the least energy eicient. Over a period o time, both perormance
Engine Power Plant 5,2 MW Stationary Dual Fuel (Diesel / Gas ) Engine (12 VDS 48/42 )
Engine Power Plant 5,2 MW Stationary Dual Fuel (Diesel / Gas ) Engine (12 VDS 48/42 ) Table of Contents 1. General technical description 2. Specification of the equipment 2.1 Diesel / gas unit 2.2 Alternator
www.inspection-for-industry.com
Quality Control Form (TEST RUNNING RECORD FOR AIR HANDLING UNIT) SUB POWER SUPPLY: MAIN POWER V, Hz, CONTROL V, Blower 1 kw, Blower 2 kw, Compressor: (1) kw (2) kw (3) kw (4) kw Heating Element: kw 1.
WÄRTSILÄ 34DF PRODUCT GUIDE
WÄRTSILÄ 34DF PRODUCT GUIDE Copyright by WÄRTSILÄ FINLAND Oy All rights reserved. No part of this document may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying,
AIR COMPRESSORS come with an inflating pistol and gauge for tyre inflation as well as additional accessories for use around the home.
Today MICHELIN is developing new consumer products which not only support motorists needs but go further to provide assistance with general care and maintenance needs in and around the home. The MICHELIN
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
BHKW. Power. Power. Gas engines for CHP units and gensets. MAN Engines. A Division of MAN Truck & Bus
Power BHKW Power Gas engines for CHP units and gensets MAN Engines A Division of MAN Truck & Bus Contents Gas engines for cogenerating power stations... 3 Application type and product range.... 3 Servicing
Refrigeration Air Dryers ADQ. Capacity: 21-4200 m 3 /h
Refrigeration Air Dryers Capacity: 21-4200 m 3 /h Water Contamination in Compressed Air T he w a t er c o n t a i n e d i n a c o m p r e s s e d a i r s y s t e m w i l l va r y acc o r d i n g t o a
IEA Workshop Copenhagen Small scale biomass co-generation with modern steam engines
IEA Workshop Copenhagen Small scale biomass co-generation with modern steam engines Dipl.-Ing. Till Augustin October, 7 th 2010 Solid Biomass Cogeneration with Spilling Steam Engines Contents: Who is Spilling
CNG / CBG. your high pressure solution. compressors for turn-key refuelling stations. www.lmf.at CNG/CBG
your high pressure solution CNG / CBG compressors for turn-key refuelling stations company profile LMF is the leading Austrian manufacturer of high-pressure piston compressor systems for air, natural gas
Sauer Compressors. for the Navy. reliable competent references
Sauer Compressors for the Navy reliable competent references Sauer Compressors for the Navy High-Pressure Compressors Medium-Pressure Compressors Low-Pressure Compressors Non-magnetic Compressors Sauer
Pressure Relief Valves SPV, SPVF
Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
SWIMMING POOL HEAT PUMP Owners Manual
SWIMMING POOL HEAT PUMP Owners Manual This manual refers to the 17.0kw and 21.0kw models only. The heat pump unit is sold with a 1 year warranty. In addition there is a 2 year parts warranty on the compressor
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
Highly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
E08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
Internal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
Series description: Wilo-Yonos MAXO-D
ATAC Solutions LTD / 1 / Series description: 1 /,5-1 1 5/,5-1 3/,5-7 3 3 5/ /, / 11 5-,5-,5-9 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power
Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
Why and How we Use Capacity Control
Why and How we Use Capacity Control On refrigeration and air conditioning applications where the load may vary over a wide range, due to lighting, occupancy, product loading, ambient weather variations,
Rickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT MAXIMATOR GmbH 2 MAXIMATOR has an extensive know-how concerning concept, development, construction and manufacturing of test benches and
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Rotary Screw Air Compressors SSR 55-75kW
Rotary Screw Air Compressors SSR 55-75kW There s more to the picture There is more to the picture. Providing air solutions is our specialty. We offer compressed air audits, system design assistance, and
Series description: Wilo-Yonos MAXO
16 88 / Series description: Wilo-Yonos MAXO /,5-1 1 Wilo-Yonos MAXO 1 5/,5-1 8 6 /,5-5/3/,5-7 5/3/,5-1 /5/,5-8 65/,5-9 5/,5-9 5/3/,5-1 5 1 15 5 Design Glandless circulation pump with threaded connection
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
In addition to the basic models, it is also possible for the units to be outfitted with add-ons.
1-1202-EN Gear ump Units For single-line centralized lubrication systems MFE5-KW3-2 MFE5-KW6 MFE5-BW7 These units comprising the MFE Group are designed to supply the lubricant used in intermittently operated,
300 Series PA Pump and Cooler Assemblies
Type 300 Series PA Sizes 300 thru 370 (Page 1 of 9) 300 Series PA Pump and Cooler Assemblies Pump and Cooler Assemblies with Air/Oil Heat Exchanger When compact gear drives require assistance to dissipate
Engine catalogue. Marine Diesel engines. MAN range - light duty
Engine catalogue Marine Diesel engines MAN range - light duty ENG 10 November 2010 Marine Diesel engines Engine Power Num. of Displacement Design kw cylinders cm3 R6-730 537 6 12,8 inline R6-800 588 6
Workshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
EXPERIMENT NO. 3. Aim: To study the construction and working of 4- stroke petrol / diesel engine.
EXPERIMENT NO. 3 Aim: To study the construction and working of 4- stroke petrol / diesel engine. Theory: A machine or device which derives heat from the combustion of fuel and converts part of this energy
ROOFTOP - HEAT PUMP UNIT. This document applies when installing into an air handler or as part of an air handling system.
ROOFTOP - HEAT PUMP UNIT Technical data Applies to Model YNRA R410A This document applies when installing into an air handler or as part of an air handling system. CONTENTS 1. General description... 2
Atlas Copco Industrial Aluminium Piston Compressors. L Series Oil-lubricated & oil-free (1.5-15 kw / 2-20 hp)
Atlas Copco Industrial Aluminium Piston Compressors L Series Oil-lubricated & oil-free (1.5-15 kw / 2-20 hp) Total capability, total responsibility Right at the heart of your business, Atlas Copco delivers
D6R Series III Track-Type Tractor
D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping
Refrigeration Air Dryers. Catalogue
Refrigeration Air Dryers Catalogue GB Using a dryer is worth it Humidity is a component of atmospheric air, which can be found in our compressed air distribution systems and the machines that use the compressed