Novel Aspects in Composite Technologies: rom Fibre Lightweight Structures
|
|
- Andrew Osborne
- 7 years ago
- Views:
Transcription
1 8th SAMPE Europe Technical Conference & Table Top Exhibition 2013 (SETAC 13) Novel Aspects in Composite Technologies: rom Fibre Lightweight Structures Wuppertal, Germany September 2013 ISBN:
2 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY Some format issues inherent in the e-media version may also appear in this print version. Copyright (2013) by SAMPE Europe All rights reserved. Printed by Curran Associates, Inc. (2014) For permission requests, please contact SAMPE Europe at the address below. SAMPE Europe PO Box 128 CH-4125 Riehen 2/ Basel, Switzerland Phone: Fax: Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY USA Phone: Fax: Web:
3 TABLE OF CONTENTS KEY-NOTE Paper KN Carbon moves the World, Carbon Fibers as Enabler for sustainable Material Revolution in Air Speaker & Author: Dr.Hubert Jäger, SGL Carbon Group, D Meitingen... 2 SESSION 1: DESIGN Session Chairman L. Cohen Paper 07 Fiber Reinforced Plastics in Machine Tool Building: A systematic approach Speaker: Ben Haugk, Technical University München, D Garching Authors: K. Drechsler, B. Haugh, Technical University München, D Garching Paper 08 Accurate 2D permeability measurement: Optical permeability characterization Speaker: Harald Grössing, Montan University Leoben, Christian Doppler Laboratory, A-8700 Leoben Authors: R. Schledjewski, H. Grössing, E. Fauster, Montan University Leoben, A-8700 Leoben Paper 11 Challenges in the design of a CFC Nacelle for an advanced Turboprop Speaker: Miguel Angel Calero Gallardo, AIRBUS MILITARY, E Getafe Authors: F.M. Prieto, F.J. Lopez del Cerro, A. Sanz Rodrigo, A.P. Madrid, L. Rubio Garcia, M.A. Calero Gallardo, AIRBUS MILITARY, E Getafe Paper 25 Optimization of the structure and the Infusion Process of a CFRP Fuselage Stiffener, according to the fiber reorientation by the Draping Process Speaker: Andreas Biel, Technical University Clausthal, D Clausthal-Zellerfeld Authors: G. Ziegmann, D. Meiners, A. Biel, Technical University, D Clausthal-Zellerfeld - O. Deniz, P. Horst, Technische Universität Braunschweig, D Braunschweig SESSION 2: MATERIAL & TESTING Session Chairman G. Ziegmann Paper 03 New developments of Fire Safety Regulations for Materials used in Aircraft Cabin Interiors Speakers & Author: D. Langer, K. Bösser, ZODIAC Aerospace Premium Galleys / SELL GmbH., D Herborn Paper 20 Fatigue of immersed Glass Reinforced Polymer Composites Tidal Turbine Blades Speaker: Ciaran Kennedy, National University of Ireland, Galway, Mech. Engineering Department, Galway Authors: C. Kennedy, C.O. Bradaigh, S. Leen, National University of Ireland, Galway... 62
4 Paper 22 Production, Characterization and Modification of a Cartrode as Heating Element for Resistance Welding of CFRP-Structures Speaker: Amke Eggers, Technical University Clausthal, D Clausthal-Zellerfeld Authors: W. Surjoseputro, G. Ziegmann, D. Meiners, A. Eggers, TU Clausthal, D Clausthal- Zellerfeld Paper 23 A Novel variable load energy absorbing Composite Component for improving Helicopter Crashworthiness Speaker: Tiansong Hou, University of New South Wales, Sydney, Australia Authors: B.G. Prusty, G.M.K Pearce, D.W. Kelly, T. Hou, University of New south Wales, Sydney - R. Thomson, Advanced Composite Structures Australia, Fishermans Bend, Australia Paper 26 Manipulating Fabric Shear Deformation by means of Membrane Tensioning from picture frame tests to generic geometries Speaker: F.N. Nezami, TU Dresden D Dresden Authors: C. Cherif, T. Gereke, TU Dresden, Institut of Textile Machinery & High Performance Material Technology, D Dresden - F.N. Nezami, TU Dresden D Dresden SESSION 3: ENGINEERING Session Chairman A. Offringa Paper 04 Manufacturing and Property Study of partial cured Panels Speaker: Betty Fantina Llorente, FIDAMC Tecnogetafe, E Getafe Authors: F.C. Alonso, B.F. Llorente, FIDAMC Tecnogetafe, E Getafe Paper 17 Robot based Plasma Treatment for the assembly of Helicopter Subfloor Groups Speaker: Niko Seeger, EUROCOPTER Deutschland, D Donauwörth Authors: P. Kustosz, U. Eberth, N. Seeger, EUROCOPTER Deutschland, D Donauwörth - K. Drechsler, Technical University München, D Garching Paper 18 Development and Analysis of a Composite Flange to attach a highly loaded Cardan Joint Speaker: Janna Sofie Riechwald, XPERION GmbH., D Kassel Authors: W. Bleser, H. Schürmann, Technische Universität Darmstadt, D Darmstadt, J.S. Riechwald, XPERION GmbH., D Kassel Paper 21 Specification of the Failure Behaviour after Impact Evaluation of different Methods of Damage Detection Speaker: Michael Weinmann, Technische Universität Clausthal, D Clausthal-Zellerfeld Authors: D. Meiners, M. Weinmann, G. Ziegmann, Technische Universität Clausthal, D Clausthal-Zellerfeld Paper 24 Understanding the differences between Design Data and Finite Element Input Data Speaker: William Marsden, GRANTA DESIGN, CB1 7EG Cambridge, UK Authors: E. Cope, S. Newham, W. Marsden, GRANTA Design, Cambridge, UK
5 SESSION 4: PROCESSING Session Chairman J. Vuorinen Paper 16 Developing an automated system for the removal of protective films from Pre-preg Material, to Remove a manufacturing bottleneck in terms of pick and place automation Speaker: C. Ward, University of Bristol, GB-BS8 1TR Bristol Authors: K. Potter, V. Bhatnagar, C. Ward, Bristol University Paper 19 Fast and robust Joining Process for Aerospace Components by local heating of Paste Adhesives Speaker: A. Sanchez Cebrian, ETH Zürich,,CH-8092 Zürich Authors: M. Zogg, P. Ermanni, A. Sanchez Cebrian, ETH Zürich, CH-8092 Zürich Paper 38 Tenax Part via Preform (PvP): New Preform Technology for Carbon Fiber RTM Speaker: Constantin Mützel, Toho-Tenax Europe GmbH., D Wuppertal Authors: M. Schneider, C. Mützel, Toho-Tenax Europe GmbH., D Wuppertal SESSION 5: THERMOPLASTICS Session Chairman A. Kwakernaak Paper 10 Novel Composite Tool Chain and its Application for Fibre Reinforced Thermoplastics Speaker: Matthias Horn, German Aerospace Center (DLR) D Stuttgart Authors: T. Wille, R. Hein, DLR Braunschweig - M. Horn. DLR Stuttgart Paper 12 Semi-Empirical Optimization of a repair geometry of Carbon Fiber Reinforced Thermoplastic Structures Speaker: Markus Kaden, German Aerospace Center (DLR) D Stuttgart Authors: Y. Mohajer-Irvani, M. Kaden, DLR Stuttgart Paper 13 Inline-Impregnation a Flexible Processing Technology for Thermoplastic reinforced Composites Speaker: Markus Hildebrandt, RWTH Aachen, ITA Department, D Aachen Authors: Ch. Hopmann, R. Schöldgen, K. Fischer, M. Hildebrandt, RWTH Aachen Paper 35 Pull-off strength assessment of co-consolidated AS4/PEEK T-joints Speaker: Bert Rietman, T P R C, NL-7521 PN Enschede Authors: R. Akkermann, B. Rietman, T P R C, NL-7521 PN Enschede Paper 37 Carbon Fibre Reinforced Thermoplastic for Aerospace Application Speaker & Author: A. Gilliot, Toho-Tenax Europe GmbH., D Wuppertal
6 SESSION 6: EU ELECTRICAL 1 Session Chairman B. Beral Paper 27 Nanotechnology for Advanced Composite Airframes Speaker: Piet Christof Woelcken, AIRBUS Operations GmbH., D Bremen Authors: M.T. Blanco Varela, AIRBUS Opertions, E Getafe, F. Pons, AIRBUS Operations, F Toulouse - P.C. Woelcken, AIRBUS Operations GmbH., D Bremen Paper 28 Enhancement of Electrical Conductivity of Aerospace Structures by incorporation of CNT doped Carrier Materials into Dry Preforms Speaker: Paolo Ballocchi, BOMBARDIER Aerospace, Belfas BT3 9DZ - & M. Fogel, EADS Innovation Works, D Munich Authors: P. Parlevliet, M. Fogel, EADS Innovation Works, D Munich - R. Walsh P.Ballocchi, BOMBARDIER Aerospace, Belfast BT3 9DZ Paper 29 Volume Electrical Conductivity Measurement on organic Composite Material Speaker: Jacques Cinquin, EADS IW, F Suresnes Authors: I. Gaztelumendi,TECNALIA, E Donostia-San Sebastian - A. Vavouliotis, V. Kostopoulos, C. Kostagiannakopoulou, Patras University, GR Patras - F. Pons, AIRBUS Operation, F Toulouse - J. Cinquin, C. Heinrich, E. Balland, EADS IW, F Suresnes SESSION 7: EU ELECTRICAL 2 Session Chairman P. Ballocchi Paper 30 Development of multi-functional Aerospace Structures using CNT-modified Composite Pre-preg Materials Speaker: Antonios Vavouliotis, Patras University, GR Patras Authors: G. Sotiriades, C. Kostagiannakopoulou, V. Kostopoulos, A. Vavouliotis, Patras University, GR Patras - J. Cinquin, EADS Innovation Works, F Suresnes - A. Korzenko, ARKEMA, F Lacq - Q. Fontana, CYTEC Industrial Materials, Wrexham, UK Paper 31 Development of CNT doped Thermoplastic Fibers and Veils for Electrical Properties enhancement in Aerospace Industry Speaker: Paulina Latko, Technology Partners, PL Warszawa Authors: A. Boczkowska, P. Latko, Technology Partners, Warshzawa - A. Salinier, CANOE, F Lacq - A. Korzhenko, ARKEMA, F Colombes Paper 32 Enhanced Electrical Conductivity of Composite Structures through integration of CNTs via Bulk Resin and/or Buckypaper Films Speaker: Richard Seddon, Tecnalia Mikeletegi Pasealekua, E Donostia-San Sebastian Authors: S. Florez, I. Gaztelumendi, R. Seddon, Tecnalia Mikeletegi Pasealekua, E Donostia-San Sebastian - F. Pons AIRBUS, Operations, F Toulouse - J. Cinquin EADS Innovation Works, F Suresnes - A. Korzhenko, ARKEMA, F Lacq
AUTOMATED FIBER PLACEMENT FOR INDUSTRIAL APPLICATIONS
RECENT DEVELOPMENTS CLIQUEZ POUR IN THE MODIFIER FIELD OF LE STYLE DU TITRE AUTOMATED FIBER PLACEMENT FOR INDUSTRIAL APPLICATIONS Clementine GALLET CEO Coriolis Composites Sept. 11th 2014, Munich TUM -
More informationForm-flexible Handling Technology (FormHand) for Automation in RTM preforming
Institute of Machine Tools and Production Technology Platzhalter für Bild, Bild auf Titelfolie hinter das Logo einsetzen Form-flexible Handling Technology (FormHand) for Automation in RTM preforming Dr.-Ing.
More informationCLIQUEZ POUR MODIFIER LE STYLE DU TITRE
Thermoplastic and stabilized dry fiber with automated fiber placement Davy Leboucher, Ing. Dipl 1/28 I. Company Profile SUMMARY II. Current robotic fiber placement III. Thermosets and Aerospace Applications
More informationHP- RTM Process Advancements
HP- RTM Process Advancements 07 2010 High Pressure Resin Transfer Molding Process Advancements Authors: Matthias Graf Dieffenbacher GmbH+Co. KG, Heilbronner Str. 20, 75031 Eppingen, Germany, matthias.graf@dieffenbacher.de
More informationCURRICULUM VITAE ADDRESS AND PERSONAL DETAILS EDUCATION WORKING EXPERIENCE DR NIKOLAOS ATHANASOPOULOS
CURRICULUM VITAE DR NIKOLAOS ATHANASOPOULOS ADDRESS AND PERSONAL DETAILS Address: 6 Solomou Str. Patras, 26222 - Greece Tel: +306946630065 E-Mail: nathan@mech.upatras.gr nikos.athanasop@gmail.com Nationality:
More informationBroad Base. Best Solutions. SIGRAFIL Continuous Carbon Fiber Tow
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAFIL Continuous Carbon Fiber Tow 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range Q Integrated value chain
More informationRedux Film Adhesives, Foaming Films, Primers and Liquid Shims. About HEXCEL
About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of composite materials such as prepregs, film adhesives and honeycomb;
More informationBroad Base. Best Solutions. SIGRAPREG Prepregs Made from Carbon, Glass, and Aramid Fibers
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAPREG Prepregs Made from Carbon, Glass, and Aramid Fibers 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range
More informationThe company Premium AEROTEC
The company Premium AEROTEC was founded as an independent company on 1 January 2009 and is a wholly owned subsidiary of EADS N.V. EADS Augsburg plant and Airbus Nordenham and Varel plants have been integrated
More informationCHARACTERIZATION OF HIGH PRESSURE RTM PROCESSES FOR MANUFACTURING OF HIGH PERFORMANCE COMPOSITES
CHARACTERIZATION OF HIGH PRESSURE RTM PROCESSES FOR MANUFACTURING OF HIGH PERFORMANCE COMPOSITES R. Chaudhari 1*, M. Karcher 1, P. Elsner 1, F. Henning 1 1 Fraunhofer Institute for Chemical Technology,
More informationCarbon Fiber Composites Low Cost Materials & Manufacturing Options
Carbon Fiber Composites Low Cost Materials & Manufacturing Options George Husman Zoltek Companies, Inc. September 13, 2012 1 Carbon Fiber Markets All China Hexcel Formosa SGL Cytec AKSA Others 2011 Estimated
More informationOverview of Recent Developments in 3D Structures
Overview of Recent Developments in 3D Structures Michael McClain, Senior R&T Engineer Organic Matrix Composites Jonathan Goering Divisional Chief Technology Officer Albany Engineered Composites 112 Airport
More informationApplications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
More informationApplicant s Research Profile. Univ.-Prof. Dr.-Ing. habil. Dipl.-Wirt. Ing.
Applicant s Research Profile Personal Information Last Name, First Name: Cherif, Chokri Academic Title: Univ.-Prof. Dr.-Ing. habil. Dipl.-Wirt. Ing. Birthday: 24.05.1966 Nationality: Marital Status: Institution:
More informationAdhesive bonding technology. Adhesive bonding in transportation construction. Intelligent solutions for transportation construction
Adhesive bonding technology Adhesive bonding in transportation construction Intelligent solutions for transportation construction Content New opportunities in 1 transportation construction Reliable bonding
More informationOngoing R&D projects in COST member countries
Ongoing R&D projects in COST member countries Christian Brischke and Holger Militz University Hamburg, Center for Wood Science, Hamburg Georg August University Göttingen, Wood Biology & Wood Products,
More informationREPAIR CONCEPT SUPPORTED BY LASER REMOVAL AND INDUCTIVE HEATING
28 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES REPAIR CONCEPT SUPPORTED BY LASER REMOVAL AND INDUCTIVE HEATING Markus Kaden*, Rüdiger Keck* *German Aerospace Center markus.kaden@dlr.de;ruediger.keck@dlr.de
More informationIntroduction General Aspects, Design To-Cost
Spring Semester 2012 131-350-00L Advanced Composite Processing Introduction General Aspects, Design To-Cost 22. February 2012 Paolo Ermanni 151-00-0350-FS2012- Paolo Ermanni, 23.02.12, page 1 Outline!!
More informationHerausforderungen an CFK-Primärstrukturen für Verkehrsflugzeuge der nächsten Generation Wie lohnt sich der Einsatz von CFK?
www.dlr.de Folie 1 Herausforderungen an CFK-Primärstrukturen für Verkehrsflugzeuge der nächsten Generation Wie lohnt sich der Einsatz von CFK? www.dlr.de Chart 2 First Generation Composite Airframe An
More informationCo-located with: 5. Innovative. Aircraft Seating 2014 AIRCRAFT CABIN Composites & Lightweight Materials
Co-located with: 5 th International Conference Aircraft Seating 2014 Save weight Reduce costs Ensure operational excellence 27 29 October 2014 Radisson BLU Hotel, Hamburg Airport, Conference Chairman:
More information2nd Annual Conference Global Automotive Lightweight Materials Initiative Summit
2nd Annual Conference Key Practical Points of the Summit: Optimizing Cost-Effective Materials and Process Technologies Using Lightweight Materials for Achieving Greater Energy Efficiency Securing Supply
More informationStructural Bonding for Lightweight Construction
Materials Science Forum Vols.618-619(2009) pp 49-56 Online at :http://www.scientific.net (2009)Trans Tech Publications, Switzerland Online available since 2009/Apr/17 Structural Bonding for Lightweight
More informationEXPERIMENTAL/NUMERICAL TECHNIQUES FOR AIRCRAFT FUSELAGE STRUCTURES CONTAINING DAMAGE
EXPERIMENTAL/NUMERICAL TECHNIQUES FOR AIRCRAFT FUSELAGE STRUCTURES CONTAINING DAMAGE Abstract Padraic E. O Donoghue, Jinsan Ju Dept. Civil Engineering National University of Ireland Galway, Ireland padraic.odonoghue@nuigalway.ie,
More informationComposite Design Fundamentals. David Richardson
Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure
More informationTechnology and Innovation for the Future of Composites Manufacturing
Technology and Innovation for the Future of Composites Manufacturing Ben Davies Sophie Wendes 15 th July 2014 Overview of Presentation Introduction to Sophie Wendes and Ben Davies GKN Overview Overview
More informationAramid Fibre/Phenolic Honeycomb
Aramid Fibre/Phenolic Honeycomb Product Data Description HexWeb HRH-10 is manufactured from aramid fibre sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and, after expanding
More informationFRAUNHOFER UMSICHT. Kick-Off-Meeting ECLIPSE, May 10 th -11 th 2012, San Sebastian. Fraunhofer UMSICHT
FRAUNHOFER UMSICHT Kick-Off-Meeting ECLIPSE, May 10 th -11 th 2012, San Sebastian Fraunhofer Society Research and Development Leading Organization for applied research in Europe Inventions Ranks 14 among
More informationTechnology Strategy to Change the Service Offered on a Refit. Edward Fitzpatrick R&D Manager, MJM Marine Ltd. e.fitzpatrick@mjm-group.
Technology Strategy to Change the Service Offered on a Refit Edward Fitzpatrick R&D Manager, MJM Marine Ltd. e.fitzpatrick@mjm-group.com Summary Introduction Industry Trends Problems with Traditional Approaches
More informationWORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION
WORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION THROUGH COMPETENCE, EXPERIENCE AND INNOVATION Unlimited Possibilities Composites Consulting Group (CCG), an independent division
More informationProduction Process of Non Crimp Fabrics [NCF] for aviation applications. Composites without borders 2014-10-15 Moskau Rainer Seuß
Production Process of Non Crimp Fabrics [NCF] for aviation applications Composites without borders 2014-10-15 Moskau Rainer Seuß Content Company profile Multiaxial structures Spreading technology MAX 5
More informationSpeech of Mr. Raoul Starmans, Vice President of Royal TenCate China at the ITMF Conference 2014 in Beijing, China
Speech of Mr. Raoul Starmans, Vice President of Royal TenCate China at the ITMF Conference 2014 in Beijing, China Composites in China 1: Introduction Good morning Ladies and Gentlemen! It is my pleasure
More informationFM 300-2 FILM ADHESIVE
FM 3002 FILM ADHESIVE DESCRIPTION FM 3002 film adhesive is a cure version of Cytec Engineered Materials widely used FM 300 film adhesive. It delivers the same superior high temperature performance, toughness
More informationThe vacuum acts uniformly, so trapped air and gas can be evacuated across the entire contact surface during and after infiltration.
VAP Vaccum Assisted Process Air and reaction gases that are trapped during closed infusion processes can cause weaknesses in lightweight components. In conventional infusion processes, the entire assembly
More informationStronger Together. Designing and Manufacturing Composite Solutions for Industrial Applications
EN Stronger Together Designing and Manufacturing Composite Solutions for Industrial Applications The future belongs to composites The advanced solutions of tomorrow are made of composites. The rigid and
More informationSEISMIC RETROFITTING TECHNIQUE USING CARBON FIBERS FOR REINFORCED CONCRETE BUILDINGS
Fracture Mechanics of Concrete Structures Proceedings FRAMCOS-3 AEDIFICA TIO Publishers, D-79104 Freiburg, Germany SEISMIC RETROFITTING TECHNIQUE USING CARBON FIBERS FOR REINFORCED CONCRETE BUILDINGS H.
More informationeditorial EFFORT IN INNOVATION, INCREASING PRODUCTIVITY
NEWSLETTER OCTOBER 2014 Nº 5 editorial CONTENTS special report The necessary cost reduction opens the door to automation pages 2-3 EFFORT IN INNOVATION, INCREASING PRODUCTIVITY news Accepted system developed
More informationComparative Cost Study of a 35m Wind Turbine Blade using Infusion and Prepreg Materials Technology
Comparative Cost Study of a 35m Wind Turbine Blade using Infusion and Prepreg Materials Technology Introduction Wind turbine blades are manufactured using advanced composite materials due to their specific
More informationROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
More informationHexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
More informationNew Scholarships 2005 - New Scholarships 2005
New Scholarships 2005 - New Scholarships 2005 DAAD-SIEMENS SCHOLARSHIP PROGRAM ASIA 21st CENTURY GERMAN ACADEMIC EXCHANGE SERVICE Deutscher Akademischer Austausch-Dienst (DAAD) Bonn and SIEMENS AG Munich
More informationPROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES
PROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES ABOUT LIFE SCIENCES ENGINEERING The joint Life Sciences Engineering business unit of Fraunhofer IPT and CMI has offices in Boston,
More informationPremium AEROTEC GmbH
Premium AEROTEC GmbH Aerostructures for the Future International t ti l Aerospace Quality Group Munich, 16.10.09 Hans Lonsinger CEO & President 1 WELCOME 2 Contents Creation of the Company The Airbus Power
More informationCurrent Challenges in the Aerospace Industry. Martin Wright, CEO, NWAA
Current Challenges in the Aerospace Industry Martin Wright, CEO, NWAA Northwest Aerospace Alliance Founded 1992 as a not for profit company Full time staff, 28 Associates, 5 Part time OEM programme support
More informationCACRC - Repair Techniques Task Group
Repair Techniques Task Group Status Report Future plans WICHITA NOV 2007 1 WHY DO WE NEED TO STANDARDIZE REPAIR TECHNIQUES The Airlines have multi-airframe, multi-engine fleets NEEDS To be able to use
More informationData mining as a method to industrialize and qualify automotive high-volume composite manufacturing.
Symposium on the occasion of the 5th anniversary of the Institute for Carbon Composites. Dr.-Ing. Christian Sorg - BMW AG Agenda. (1) Introduction Requirements to high-volume Composite Manufacturing Challenges
More informationCARBON/DYNEEMA INTRALAMINAR HYBRIDS: NEW STRATEGY TO INCREASE IMPACT RESISTANCE OR DECREASE MASS OF CARBON FIBER COMPOSITES
26 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES CARBON/DYNEEMA INTRALAMINAR HYBRIDS: NEW STRATEGY TO INCREASE IMPACT RESISTANCE OR DECREASE MASS OF CARBON FIBER COMPOSITES J. G. H. Bouwmeester*,
More informationComposites in Automotive : Great hope for the car of the future and enormous challenges to face. Yannick AMOSSE March 31, 2015
Composites in Automotive : Great hope for the car of the future and enormous challenges to face Yannick AMOSSE March 31, 2015 Composites materials : Interest and advantages Strength, stiffness and lightweight
More informationSustainable. Solutions. Smart Cities. for. What is a Smart City? www.sustainablecitiessolutions.com
Sustainable for Solutions Smart Cities What is a Smart City? www.sustainablecitiessolutions.com Contents Introduction 3 Executive Summary 4 Background & Methodology 5 Description of a Smart City 6 Most
More information1. MSc Communication and Media Engineering (CME) University of Applied Sciences Offenburg
1. MSc Communication and Media Engineering (CME) University of Applied Sciences Offenburg 2. M.Sc. Computer Science with Media Applications Brandenburg University of Applied Sciences 3. M.Sc. Digital Media
More informationCONSULTING & INNOVATION. Aerospace. Our Consulting Expertise and Projects
CONSULTING & INNOVATION Aerospace Our Consulting Expertise and Projects Takeoff with UNITY For years, the aerospace industry has been characterized by drastic changes. On the one hand, it is experiencing
More informationDelcam s Aerospace Heritage
Delcam s Aerospace Heritage With over 30 years CADCAM experience and now the world s largest specialist supplier of machining software, Delcam plc provides aerospace solutions for civil, military, rotary
More informationNUARB TRAINING ACADEMY
NUARB TRAINING ACADEMY NUARB TRAINING ACADEMY Adding value to your people COPYRIGHT: The course materials are protected by Copyright laws and may not be reproduced or distributed without consent by NUARB
More informationBusiness Continuity Policy
Business Continuity Policy Software, consultancy and services for global trade and supply chain management Business Continuity Policy Companies using AEB solutions for managing and monitoring their logistics
More informationHIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE
HIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE MAXIME ROUX 1, NICOLAS EGUÉMANN, LIAN GIGER, CLEMENS DRANSFELD Fachhochschule Nordwestschweiz (FHNW), Institut für
More informationChapter 5 Bridge Deck Slabs. Bridge Engineering 1
Chapter 5 Bridge Deck Slabs Bridge Engineering 1 Basic types of bridge decks In-situ reinforced concrete deck- (most common type) Pre-cast concrete deck (minimize the use of local labor) Open steel grid
More informationUse of Continuous Fiber Reinforced Engineering Plastics: The Seat Pan of the Opel Astra OPC
Use of Continuous Fiber Reinforced Engineering Plastics: The Seat Pan of the Opel Astra OPC Jörg Schnorr, BASF SE, Dr. Ralf Langendorf, Adam Opel AG, Rüsselsheim, Jordan Kurikov, BASF SE, Ludwigshafen
More informationAcrosoma 3D panels for road and wind
Acrosoma 3D panels for road and wind ir ir Jan Jan Verhaeghe, CEO CEO Composittrailer Composittrailer Nordic Nordic Composite Days Days 1 Aalborg, August 25th 2008 Aalborg, August 25th 2008 Structural
More informationSchunk Fiber-Reinforced Polymers Your Innovative Ideas can become Reality!
Schunk Fiber-Reinforced Polymers Your Innovative Ideas can become Reality! Schunk Kohlenstofftechnik Schunk Fiber-Reinforced Polymers Your Innovative Ideas can become Reality! Are you looking for new possibilities
More informationIntroduction to Pressure Pipe Rehabilitation with CIPP
Introduction to Pressure Pipe Rehabilitation with CIPP Founded in early 1990 s RS Technik is a global leader in the rehabilitation of underground pipes RS Technik uses Cured-in- Place (CIPP) technology
More informationThermosetting and Thermoplastic Polymer Matrices for Composites
Thermosetting and Thermoplastic Polymer Matrices for Composites Dr Ian Hamerton Reader in Polymer Chemistry Chemistry Department Faculty of Engineering and Physical Sciences and Surrey Materials Institute
More informationAdvanced Systems & Equipment
Advanced Systems & Equipment Flotation Systems Utilising extensive experience gained from over 70 years of innovation, GKN Aerospace - Portsmouth is a leading supplier of inflatable recovery systems and
More informationComposite Program in Taiwan Aviation Industry and Areas of Interest(s)
Composite Program in Taiwan Aviation Industry and Areas of Interest(s) Eric Chen Initial Airworthiness Section CAA of Taiwan Singapore, September 3, 2015 Outline 2 CAA Flight Standards Division (FSD) Introduction
More informationVerstehen statt Trial-and-Error: Prozesssimulation zum Nutzen der Industrie
Prof. Dr. Vasily Ploshikhin Airbus endowed chair / University of Bremen Verstehen statt Trial-and-Error: Prozesssimulation zum Nutzen der Industrie Bremen, 17.11.2011 Organization research team Staff:
More informationMaintenance and Asset Management
How sustainable Maintenance and Asset Management put your company in the fast lane New approach for the automotive industry Maintenance in the automotive industry Driving billions 292 billion euros that
More informationHexFlow RTM6/RTM6-2. HexFlow
HexFlow RTM6/RTM6-2 Safety & Processing Recommendations for Injection & Infusion HexFlow RTM6/RTM6-2 Safety & Processing Recommendations for Injection & Infusion These recommendations along with the Technology
More informationHow To Improve Mechanical Properties Of A Composite Material
Usak University Journal of Material Sciences journal homepage: http://uujms.usak.edu.tr Research article Mechanical properties of bi axial glass fiber and pistachio shell reinforced polyester composites
More informationWorkshop Program 1st German-U.S. Workshop on Predictive Analytics, Cyber-Physical Systems, and Industrie 4.0 in Big Data Environments
Workshop Program 1st German-U.S. Workshop on Predictive Analytics, Cyber-Physical Systems, and Industrie 4.0 in Big Data Environments Technische Universität München, Garching near Munich, 17 18 November
More informationCarbon Fibre in Mass Automotive Applications Challenges and Drivers for composites
Carbon Fibre in Mass Automotive Applications Challenges and Drivers for composites Robert Crow CEng MIMM Materials Innovation Manager Franco-British Symposium on Composite Materials 28 th April Agenda
More informationAutomated Strength Analysis Processes for Aircraft Structures
Automated Strength Analysis Processes for Aircraft Structures Automatisierte Festigkeitsanalyseprozesse für Flugzeugstrukturen Univ.-Prof. Dr. Martin Schagerl Overview Structure Build-Up Structure Design
More informationProduct Data. HexPly 8552 Epoxy matrix (180 C/356 F curing matrix)
HexPly 8552 Epoxy matrix (180 C/356 F curing matrix) Product Data Description HexPly 8552 is a high performance tough epoxy matrix for use in primary aerospace structures. It exhibits good impact resistance
More informationL I S A - Lightweight Structural Applications Based on Metallic and Organic foams
L I S A - Lightweight Structural Applications Based on Metallic and Organic foams Project duration 2/2002-1/2005 European Commission, Fifth Framework Program GROWTH ; G5RD-CT-2001-00484 9 partners 1 LISA
More informationTERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call)
TERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call) IMDEA Materials Institute (Madrid Institute for Advanced Studies of Materials) is a nonprofit independent research organization promoted
More informationTECHNICAL DATA SHEET
EPOXY - NG1001 Formulated Resin System for Pre-preg Process General information Description: TECHNICAL DATA SHEET EPOXY - NG1001 is a formulated epoxy based resin system for hot melt pre-preg and pressure
More informationEx Smiths 14% 20% 14% 17% Growing commercial installed base 1,747 -a) deliveries in 06 ~2,100 -b) deliveries in 07 Segment Profit
GE Aviation Aviation ($ in billions) $7.6 20% Ex Smiths 14% Business imperatives Winning technology Revenue $6.3 $1.4 $1.6 17% 14% Deep domain knowledge Growing commercial installed base 1,747 -a) deliveries
More informationAerospace Manufacturing Technology Challenges
Aerospace Manufacturing Technology Challenges Mark SUMMERS, Head of Technology; Manufacturing, Materials & Structures Advanced Engineering UK 2015, 5-Nov-15, NEC, Birmingham UK Our mission through 2.1bn
More informationPLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
More informationIntroduction of New Large Tow Carbon Fiber Products and PCM* Technology. * Prepreg Compression Molding
Introduction of New Large Tow Carbon Fiber Products and PCM* Technology * Prepreg Compression Molding Mitsubishi Rayon Carbon Fiber Business for Industrial applications MCHC Group Organization Chemical
More informationRobot Welding Torch System
T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly
More informationFire Extinguishers Water Extinguishers
Water Extinguishers Water extinguishers are suitable for Class A fires caused by combustion of solid materials such as wood, paper, straw, textiles and coal etc. Water additive extinguishers use an environmentally
More information2009-12-23 ICS: 93.160. Strengthening retrofitting of reinforced concrete structures by gluing of fibre reinforced polymeric fabrics (FRP fabrics)
36888 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 20091223 ICS: 93160 150114010801:2009 H HELLENIC CHNICAL SPECIFICATION (FRP ) Strengthening retrofitting of reinforced concrete structures by gluing of fibre
More informationThe Fundamental Principles of Composite Material Stiffness Predictions. David Richardson
The Fundamental Principles of Composite Material Stiffness Predictions David Richardson Contents Description of example material for analysis Prediction of Stiffness using Rule of Mixtures (ROM) ROM with
More informationwww.um.edu.mt Bachelors in Industrial Engineering Faculty of Engineering, University of Malta
www.um.edu.mt Bachelors in Industrial Engineering Faculty of Engineering, University of Malta Outline What is Industrial Engineering? Why study for B.Ind.Eng.(Hons)? Course structure Who offers this course?
More informationAIRTEC 2012: An excellent international B2B-Meeting event for the aerospace industry
Frankfurt / Main, Germany, December 10, 2012 Review: AIRTEC 2012: An excellent international B2B-Meeting event for the aerospace industry - 3.236 participants from 45 nations - International share grows
More informationCeralink Capabilities and Opportunities
Ceralink Capabilities and Opportunities Dr. Holly Shulman President, Materials Scientist Ceralink Inc. Rensselaer Technology Park 105 Jordan Rd. Troy, New York 12180 holly@ceralink.com www.ceralink.com
More informationSGS AeroSpAce ServiceS
GS erospace Services SGS WHEN YOU NEED TO BE SURE FOR MANUFACTURERS, SUPPLIERS AND OPERATORS Aviation is one of the most exciting industries in the world and also one of the safest, guaranteed by the highest
More informationCLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
More informationEuropean Technical Assessment. ETA-02/0020 of 22 September 2015. English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-02/0020 of 22 September 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the
More informationFAA/NASA Workshop on Key Characteristic's for Composite Material Control Chicago, IL. Cytec Engineered Materials August 6th 2002
FAA/NASA Workshop on Key Characteristic's for Composite Material Control Chicago, IL Cytec Engineered Materials August 6th 2002 Agenda Goal of Prepreg Material Specification Sources of Variation Material
More informationApplication Example: Scanning down to the smallest Detail Optical Metrology supports the Building of full-scale Helicopter Mock-ups
Application Example: Scanning down to the smallest Detail Optical Metrology supports the Building of full-scale Helicopter Mock-ups Measuring system: ATOS Triple Scan Keywords: aerospace, reverse engineering,
More informationUR:BAN Networked Transportation System. Good Practice Case of Industry-led R&D Project with Good Prospects of Post-project Exploitation
UR:BAN Networked Transportation System Good Practice Case of Industry-led R&D Project with Good Prospects of Post-project Exploitation Programme Mobility and Transportation Technologies "Mobility and Transport
More informationIs the body repair industry ready for the composite onslaught?
Is the body repair industry ready for the composite onslaught? Author: Peter Els Image credit: wot.motortrend.com In recent years progressive automotive manufacturers have heralded composites, in particular
More informationGlobal Investor Forum Market Perspectives / Strategy. Marwan Lahoud, Chief Strategy and Marketing Officer London, 11th/12th December 2013
Global Investor Forum Market Perspectives / Strategy Marwan Lahoud, Chief Strategy and Marketing Officer London, 11th/12th December 2013 Safe Harbour Statement Disclaimer This presentation includes forward-looking
More informationDETERMINATION OF TIME-TEMPERATURE SHIFT FACTOR FOR LONG-TERM LIFE PREDICTION OF POLYMER COMPOSITES
DETERMINATION OF TIME-TEMPERATURE SHIFT FACTOR FOR LONG-TERM LIFE PREDICTION OF POLYMER COMPOSITES K. Fukushima*, H. Cai**, M. Nakada*** and Y. Miyano*** * Graduate School, Kanazawa Institute of Technology
More informationContents. Process description. 1 Introductions. 2 Process engineering 2.1 Melting by friction 2.2 Cycle of vibration welding
Process description Contents 1 Introductions 2 Process engineering 2.1 Melting by friction 2.2 Cycle of vibration welding 3 Machine technology / adjustment facilities 3.1 Electromagnetic drive system 3.2
More informationAnnual General Meeting 2010. Wiesbaden April 30, 2010
Annual General Meeting 2010 Wiesbaden April 30, 2010 Annual General Meeting 2010 Agenda 1. Fiscal Year 2009 2. First Quarter and Outlook 2010 3. Fundamental Trends and Strategy 2 Fiscal Year 2009 SGL Group
More informationPROCESS TECHNOLOGY. for lightweight design in automotive industry. TRUMPF Laser- und Systemtechnik GmbH. Marc Kirchhoff Industry Management Automotive
TRUMPF Laser- und Systemtechnik GmbH PROCESS TECHNOLOGY for lightweight design in automotive industry Marc Kirchhoff Industry Management Automotive Ditzingen, 27.01.2015 1 Design fit-for-laser Lightweight
More informationCompression RTM - A new process for manufacturing high volume continuous fiber reinforced composites
Compression RTM - A new process for manufacturing high volume continuous fiber reinforced composites 5 th International CFK-Valley Stade Convention 07-08 June 2011, STADEUM Stade, Germany Authors Raman
More informationMedia-Information 2005 Editorial Calendar
Fachzeitschrift für die Optischen Technologien Media-Information 2005 Editorial Calendar AT-Fachverlag GmbH Postfach 50 01 80 D-70331 Stuttgart Telefon (0711) 952 951-0 Telefax +49 (0)711 952 951-99 issue/date
More informationUSE OF CFRP LAMINATES FOR STRENGTHENING OF REINFORCED CONCRETE CORBELS
International Journal of Civil Engineering and Technology (IJCIET) Volume 6, Issue 11, Nov 2015, pp. 11-20, Article ID: IJCIET_06_11_002 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=6&itype=11
More information