Advanced Systems & Equipment
|
|
- Dale Wells
- 8 years ago
- Views:
Transcription
1 Advanced Systems & Equipment
2 Flotation Systems Utilising extensive experience gained from over 70 years of innovation, GKN Aerospace - Portsmouth is a leading supplier of inflatable recovery systems and products. A wide range of technologies and processes has been developed for these systems and these are supported by the in-house testing and qualification facilities of GKN Aerospace. > Helicopter emergency flotation systems > Fighting vehicle flotation systems > Inflatable torpedo recovery systems > Aircraft training and escape slides Helicopter Emergency Flotation Systems GKN Aerospace - Portsmouth is a recognised authority in the design, manufacture and qualification and support of complete emergency flotation systems. > Role fit / skid mounted / permanent installation > Manual or fully automatic actuation control systems > Demonstrated to reduce structural load under ditching conditions > Designed to exceed minimum flotation time (proven up to 24 hrs) > Developed to meet optional ditching requirements, 30 knots & 5m/s vertical > Systems designed to FAR / JAR 27 and 29 > Sea state 6 flotation system design and manufacture BELL 427 SIKORSKY BLACK HAWK AGUSTAWESTLAND LYNX MIL MI8/MI17 AW101 EMERGENCY FLOTATION
3 FUEL / HYDRAULIC SELECTOR SWITCH OFF REFUEL DEFUEL FUEL HYDRAULIC WATER DRAIN 0 Fuel Tanks & Systems GKN Aerospace - Portsmouth has supplied an extensive range of products for different types of fixed and rotary wing aircraft, land vehicles, missiles, UAVs, torpedos and marine vessels, and has also designed, qualified and manufactured a variety of range extender tanks and auxiliary fuel tanks for fixed wing and rotary wing aircraft. GKN Aerospace - Portsmouth has developed rotational moulded rigid fuel containers as well as flexible elastomeric and lightweight fabric reinforced thermoplastic tanks for a range of military fighting vehicles, including internal and external mounted products. GKN Aerospace - Portsmouth has also developed and manufactured fuel tanks and thermal compensator systems for missiles and torpedoes with extensive and proven operational capabilities in excess of 20 years. Self Sealing Technologies GKN Aerospace - Portsmouth can incorporate a variety of materials in its design of both flexible and rigid fuel containers to provide complete self sealing ballistic protection. This can be used in both aircraft and military vehicle applications. Crashworthy Fuel Containment GKN Aerospace - Portsmouth has developed an extensive range of elastomeric and thermoplastic fabric reinforced fuel bladders for the aviation industry to increase protection from the risk associated with post crash fire. These products are certificated to the latest FAR 27/29 standards and military specifications. Ultra Lightweight Fuel Bladders GKN Aerospace - Portsmouth can design and manufacture ultra lightweight fuel bladders from thin film polymer laminates for the UAV and RPV markets. Vehicle Fuel Systems Complete turnkey fuel systems > Secure fuel storage, self sealing and explosion suppression systems > Modular design, flexible and rigid piping, quick release connections > Fuel filtration, cooling and delivery > Lightweight flexible bag tanks & rigid plastic tanks > Design of sub-systems ROTATIONALLY MOULDED FUEL TANK AND SYSTEM LYNX EXTENDED RANGE FUEL TANK CRASHWORTHY FUEL CELL UNDERGOING REPAIRS SOLENOID VALVE TO CONTROL FUEL AND HYDRAULIC DRAIN AND FILL
4 Fabricated Structures & Components FLEXIBLE FUEL CELL REPAIRS GKN Aerospace - Portsmouth has comprehensive mould and coating facilities to produce a range of synthetic and natural elastomeric compounds, thermoplastic and rubber. Metal to rubber bonded fittings together with fabricated sheet material. RANGE OF MOULDINGS AND FITTINGS These are incorporated both into the company s own products and are also supplied to customers specialist requirements. GKN Aerospace - Portsmouth has facilities, skills and capabilities to build structures fabricated from its own, and third party, materials including: > Helicopter "Sea Trays" (wet floor systems) > Radome covers > Fuel bunds > Flexible protective storage systems > Rail gangway > Airport canopies > Aircraft emergency escape slides EMERGENCY ESCAPE TRAINING SLIDE AW101 SEA TRAY ALL TERRAIN LOGISTIC SUPPORT VEHICLE Fuel Handling GKN Aerospace - Portsmouth is part of a worldwide group offering innovative engineering with state-ofthe-art technology to market a complete range of fuel handling solutions. FUEL BUND AND AIR PORTABLE FUEL CONTAINER > Air portable/deployable fuel and water containers to 2000 litre capacity > Fuel Cat - 6 wheeled specialised all terrain logistic support vehicle, 1300 litres on-board litres towed > High Mobility Transport (3 to 4.5 ton) - self loading containers for ground support and refuelling operations > Air delivered bulk fuel installations > Portable pumps from 150 to 680 litres/min > Inflatable fuel bunds for rapid deployment > Fuel filtration, filter water separators and fuel additives injection equipment > Forward area refuelling - complete modular systems DEPLOYMENT OF AIR PORTABLE FUEL CONTAINER
5 GKN Aerospace > GKN Aerospace is a global Company of over 1.4 billion with strong sales growth in both military and civil markets. > GKN Aerospace has a manufacturing presence on every major aerospace platform. > GKN Aerospace s technology led products are manufactured using the latest developments in materials processing and advanced composite and metallic manufacturing technologies. > GKN Aerospace s experience, knowledge and capability in integrated aerostructures, engine products, integrated propulsion systems and special products is supported by a strong aftermarket operation. > GKN Aerospace is recognised as one of the world s leading suppliers of primary composite structures. It was the first company to manufacture composite main wing spars for large aircraft. > GKN Aerospace was the first company to apply resin film infusion technology and take it to full production. > GKN Aerospace has delivered the first large engine composite fan containment case. > GKN Aerospace has world leading proprietary technologies for transparencies and special products. > GKN Aerospace has developed and delivered the first all electric de-icing system for a large commercial transport aircraft. > GKN Aerospace researches and uses its own specialist materials in the manufacture of emergency flotation systems and fuel cells. > GKN Aerospace has over 600 highly skilled engineers available 24 hours a day across three continents. > The combined manufacturing facilities of GKN Aerospace cover an area in excess of 780,000 sq m. GKN Aerospace - Portsmouth GKN Aerospace - Portsmouth designs, manufactures and qualifies a range of elastomeric products and associated systems for aerospace, military, marine and commercial applications. With over sixty years experience in the development of materials and flexible products, the Company offers a comprehensive and unique service to customers throughout the world. This service spans the supply of raw material to finished products and systems. Located at Portsmouth, Hampshire in England, GKN Aerospace has engineering and research facilities, including chemical and material laboratories, and design and development facilities. The manufacturing capability includes a full rubber processing plant, fabrication shops for fuel cells and inflatables, system integration and rigid moulding production facilities. Customers include Airbus Industries, AgustaWestland, BAE Systems, Bell Helicopter Textron, Boeing, CASA/EADS, Eurocopter, Finnish Defence Forces, IPTN, Raytheon, Rolls-Royce, SAAB Bofors, Swedish Defence Forces (FMV), UK Ministry of Defence, United Technologies. GKN Aerospace Portsmouth is an ISO 9001 / / registered company and holds EASA Part 145 approval. The Company has supplier approvals from most major aerospace and defence companies worldwide including AS 9100, MoD, EASA Part 21 subpart G, EASA Part 21 subpart J, WHL (QRS01), AgustaWestland, Eurocopter, BAE Systems, Airbus UK, Sikorsky and Raytheon Aircraft. Front cover photography: AW101 courtesy of AgustaWestland and Terrier courtesy of BAE Systems.
6 IRVING REDDITCH GKN Aerospace - Portsmouth The Airport Portsmouth P03 5PE United Kingdom tel: +44 (0) fax: +44 (0) info@fptind.co.uk www:
Aerospace and Defence
Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems World Class Filtration Solutions Porvair Filtration Group Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems Porvair Filtration
More informationIsrael s Aerospace Industry. Higher Faster Farther
Israel s Aerospace Industry Higher Faster Farther April 2013 Areas of Activity Civil/Commercial Aviation Space Applications Military & Defense Israel Aerospace Innovation Aviation Space UAV Gulfstream
More informationGE Aviation. Aerostructures Facility Overview. GE Aviation
GE Aviation Aerostructures Facility Overview This document provides information on the capabilities and facilities at the GE Aviation aerostructures business at Hamble, in the UK, including its history
More informationThe Art of Safe Landings
The Art of Safe Landings Reliable. From landing to take-off. Over 100 years of experience... In 1911, 21 year-old Anthony Fokker flew his home-built aircraft over the city of Haarlem. In 1919, one of the
More informationCOMPANY PROFILE YOUR PREFERRED PARTNER IN AEROSPACE TECHNOLOGIES SUBSIDIARIES. AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic
COMPANY PROFILE AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic - The largest aerospace manufacturer in the Czech Republic - One of the oldest aerospace manufacturers in the world (*1919) -
More informationThe Comprehensive Coatings Service Provider to Industry
Coating Systems Excellent Engineering Solutions The Comprehensive Coatings Service Provider to Industry 2 Coating Systems Weir Coatings specialises in the application of high performance protective linings
More informationCustom Engineered Design Custom Engineered Design
Custom Engineered Design Custom Engineered Design English Why Choose Elfab? As Europe s leading manufacturer of rupture discs, Elfab s expertise in developing custom engineered solutions has been applied
More informationPrecision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
More informationRedux Film Adhesives, Foaming Films, Primers and Liquid Shims. About HEXCEL
About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of composite materials such as prepregs, film adhesives and honeycomb;
More informationLatest State of Direct Refueling Technology
Latest State of Direct Refueling Technology PANTOGRAPH Special fueling arm for direct refueling of aircraft, fighters, helicopters and tank trucks CLA-VAL FUELING Sales guide - Aviation fueling arms Today
More informationSikorsky Aerospace Services A new world of support
Sikorsky Aerospace Services A new world of support Introducing Sikorsky Aerospace Services Rotary Wing. Fixed Wing. Complete fleet solutions. Any mission. One aviation service partner. Sikorsky Aerospace
More informationIn addition, we offer consulting services in equipment management and special design products.
Franke Care System Comprehensive service and support provider Franke Care System GmbH & Co. KG (FCS) was founded in 1997. The company is lead by Managing Director, Helmut Matthies, who has 30 years of
More informationAerospace Supply Chain & Raw Material Outlook
Aerospace Supply Chain & Raw Material Outlook Presented by: Peter C. Zimm Principal 1 Agenda Aerospace Demand Outlook Aerospace Supply Chain Trends 2 AEROSPACE DEMAND OUTLOOK Total aircraft production
More informationWorld Class Precision Engineering
World Class Precision Engineering www.mercaerospace.co.uk aerospace defence petrochemical energy A tradition of delivering world class precision engineering Merc Aerospace is a world class precision engineering
More informationLAZIO AEROSPACE INTERNATIONAL TAKE OFF: COMPETENCE, EXCELLENCE, CREATIVITY. Company name: COMPANY PROFILE. Company details.
LAZIO AEROSPACE INTERNATIONAL TAKE OFF: COMPETENCE, EXCELLENCE, CREATIVITY. Company name: COMPANY PROFILE Company details Address: Post code: Town: Country: Phone: Email: Date of foundation: Contact person:
More informationFSI LOGO Revision 1.0
FSI LOGO Revision 1.0 HELICOPTER OPERATIONS MODERN HELICOPTERS MODERN HELICOPTERS MODERN HELICOPTERS MODERN HELICOPTERS HUMS Ground Station Overview Health and Usage Monitoring System Ground Station Help
More informationFlood Rescue Emergency Services First Responders Coast Guard Police
RESCUE RESCUE RESCUE Flood Rescue Emergency Services First Responders Coast Guard Police Sealegs amphibious marine craft give rescue and patrol organizations unique multi-role capabilities which cannot
More informationmobile pipeline Bulk transportation and storage of energy gases
mobile pipeline Bulk transportation and storage of energy gases 1 An advanced pipeline to supply energy gases over long distances at competitive costs capacity matters Your mobile pipeline In 2006, Hexagon
More informationwww.forestgroupuk.co.uk Military & Bespoke Applications
www.forestgroupuk.co.uk Military & Bespoke Applications 2014 08 Introduction The Forest Group was set up in 2000, initially to provide solutions to health and safety issues facing the housebuilding industry.
More informationEngineering & Testing Services. Hydraulic Fitting Design and Hydro-Mechanical Testing
Engineering & Testing Services Hydraulic Fitting Design and Hydro-Mechanical Testing Aerofit, Inc. APT Laboratory 1425 South Acacia Avenue Fullerton, CA 92831 Main: 714-521-5060 Fax: 714-535-9862 Our Company
More informationInnovation in Heat Transfer and Fluids Management
Innovation in Heat Transfer and Fluids Management Welcome to Marston Aerospace Marston Aerospace provides a wide range of heat transfer and fluids management products and services for the military and
More informationEmmaco Uk P R E S S R E L E A S E AEROSPACE TOOLING MACHINED FASTER DUE TO 5-AXIS SPINDLE RETROFIT
Emmaco Uk P R E S S R E L E A S E AEROSPACE TOOLING MACHINED FASTER DUE TO 5-AXIS SPINDLE RETROFIT To increase the efficiency of aircraft tooling manufacture at its Dukinfield factory, near Manchester,
More informationAerospace Supply Chain & Raw Material Outlook
Aerospace Supply Chain & Raw Material Outlook Presented by: Dr. Kevin Michaels Global Managing Director Aviation Consulting & Services ICF SH&E SpeedNews 4 th Aerospace Raw Materials & Manufacturers Supply
More informationPart 0 - Classification and Surveys Classification and Surveys I-0 2016-01
Code Edition I - Ship Technology Part 0 - Classification and Surveys Classification and Surveys I-0 2016-01 Part 1 - Seagoing Ships Chapter 1 - Hull Structures I-1-1 2016-01 Chapter 1 - Hull Structures
More informationThe UK National Aeronautics Technology Strategy
The UK National Aeronautics Technology Strategy Ray Kingcombe Head of Technology Aerospace, Marine & Defence Unit Department for Business, Innovation & Skills (BIS) Aerospace Industry in the UK UK aerospace
More informationCAT VIII WORKING DRAFT
Category VIII Military Aircraft and Associated Equipment A. End Items, Systems, Accessories, Attachments, Equipment, Parts and Components 1. Fighter, bomber, attack, or specialized fixed or rotary wing
More informationProcurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector
Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector 1 2 About us Saudi Maintenance and Supply Chain Management Company (SMSCMC) is a top-tier integrated supply chain
More informationAerospace Industry & Engineering in the UK
Aerospace Industry & Engineering in the UK contents 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 Industry Introduction Aerospace Engineering Opportunities and Environmental Regulations UK Aerospace Institute
More informationReliable. Innovative. Accessible. Your life cycle support partner.
Reliable. Innovative. Accessible. Your life cycle support partner. Our strategic focus on innovation and operational excellence combined with our long-standing experience with defence forces around the
More informationFacility Support Services
Facility Support Services The Precision Group has a breadth of experience delivering innovative, first class facility support service solutions to clients across the public and private sectors. Our expert
More informationPosition Descriptions. Aerospace
Position Descriptions Aerospace Aerospace Engineering? Aeromechanics / Flight Control / Flight Qualities Engineer Predict, analyze, and verify air vehicle flight dynamics including aircraft aerodynamics,
More informationRevised April (May) 2015
Section 19.0 Cross Connection Control Policy 19.1 Responsibility 19.1.1 The Elkhart Water Utility has the responsibility to supply safe, potable water from the source to the point of delivery defined as
More informationChapter 2. Basic Airplane Anatomy. 2008 Delmar, Cengage Learning
Chapter 2 Basic Airplane Anatomy Objectives Identify components of basic aircraft anatomy Understand aircraft size and weight categories List different types and examples of General aviation aircraft Military
More informationThe North West Aerospace Alliance Aerospace Supply Chain Excellence (ASCE)
The North West Aerospace Alliance Aerospace Supply Chain Excellence (ASCE) The content of this material is the property of the North West Aerospace Alliance (NWAA) and should not be reproduced without
More informationSpeech of Mr. Raoul Starmans, Vice President of Royal TenCate China at the ITMF Conference 2014 in Beijing, China
Speech of Mr. Raoul Starmans, Vice President of Royal TenCate China at the ITMF Conference 2014 in Beijing, China Composites in China 1: Introduction Good morning Ladies and Gentlemen! It is my pleasure
More informationCase No COMP/M.3649 - FINMECCANICA / BAES AVIONICS & COMMUNICATIONS. REGULATION (EC) No 139/2004 MERGER PROCEDURE
EN Case No COMP/M.3649 - FINMECCANICA / BAES AVIONICS & COMMUNICATIONS Only the English text is available and authentic. REGULATION (EC) No 139/2004 MERGER PROCEDURE Article 6(1)(b) NON-OPPOSITION Date:
More informationA leading British OEM of integrity in the Shipping, Naval, Offshore Oil & Gas, Fire Safety and Energy Markets.
A leading British OEM of integrity in the Shipping, Naval, Offshore Oil & Gas, Fire Safety and Energy Markets. T: +44 207 629 8475 F: +44 207 629 8477 info@coltraco.co.uk www.coltraco.com Coltraco Limited
More informationUNCLASSIFIED UNCLASSIFIED
DSTO Support to Accident & Incident Investigations DSTO Melbourne DSTO in Defence DSTO structure DSTO at a glance Budget 2011-12: $440m 11 research divisions 2600 staff 7 sites across Australia DSTO Support
More informationCase Study BOEING 787: GLOBAL SUPPLY CHAIN MANAGEMENT TAKES FLIGHT. Leveraging Global Partners to Maximize Customer Value
Case Study Company Profile World s leading aerospace company and the largest manufacturer of commercial jetliners and military aircraft combined Goal Leverage global partners to reduce cost, speed time-to-market
More informationULM Ultra Low Maintenance batteries for aircraft. Because you have a choice.
ULM Ultra Low Maintenance batteries for aircraft Because you have a choice. Designed by Saft engineers and tested in the air, not on paper. How ULM technology works ULM performance hinges on Saft s plastic
More informationChemical Decontamination and Fluid Handling Services
Chemical Decontamination and Fluid Handling Services Westinghouse is a global industry expert in decontamination and fluid handling processes, with proven abilities in decontamination and remediation work.
More informationThales capabilities will meet and exceed civil aviation synthetic training requirements. www.thalesgroup.com/services
Civil Aviation Training Capabilities Thales capabilities will meet and exceed civil aviation synthetic training requirements www.thalesgroup.com/services THE FoRMATION PRODUCT LINE BY THALES TOTAL CAPABILITIES
More informationUndergraduate Aerospace Engineering
Undergraduate Aerospace Engineering Faculty of Engineering When I started my job, I was mostly involved in testing our Formula One car. A few months later, after a lot of learning, I started contributing
More informationSecurity Info Day, FP7-SEC-2011-1, 9 September 2010
MILITARY UNIVERSITY OF TECHNOLOGY WARSAW, POLAND Jerzy Malachowski, Krzysztof Damaziak Military University of Technology, Department of Mechanics and Applied Computer Science 2 Gen. Sylwestra Kaliskiego
More informationDIE CASTING POLYURETHANE TIRE RUBBER COMPOSITES THERMOPLASTICS
DIE CASTING POLYURETHANE TIRE RUBBER COMPOSITES THERMOPLASTICS Value & Resources Chem-Trend is a global organization with a singular focus of formulating and manufacturing innovative chemical specialties
More informationLEADING THE WAY FROM SEA TO LAND SURVEILLANCE RADAR SOLUTIONS
LEADING THE WAY FROM SEA TO LAND SURVEILLANCE RADAR SOLUTIONS SITUATIONAL INTELLIGENCE, THE WORLD OVER A Kelvin Hughes radar is the primary tool for long range threat detection. On land and at sea we provide
More informationWORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION
WORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION THROUGH COMPETENCE, EXPERIENCE AND INNOVATION Unlimited Possibilities Composites Consulting Group (CCG), an independent division
More informationCollaborative Supply Chain
Collaborative Supply Chain Presented by Mr. F. R. Singhvi Joint Managing Director, Sansera Engineering Private Limited, Bangalore, India. Challenges for Supply Chain: Mid-to long-term Collaboration Competitiveness
More informationA GREAT IDEA! An Advanced, Worldwide Leader in Rapid. Leak Detection Sealant Removal Curing Repair
A GREAT IDEA! An Advanced, Worldwide Leader in Rapid Leak Detection Sealant Removal Curing Repair STANDARD REPAIR TIMES Engine Change............ 4 to 6 hours R & R a component......... Few minutes to
More informationNAN YA NYLON 66 Engineering Plastics. Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage
NAN YA NYLON 66 Engineering Plastics Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage Introduction NAN YA FR-NYLON 66 has water absorption propertieslike other nylons.
More informationAtlantic Maintenance Services
Atlantic Maintenance Services Atlantic Maintenance Services Ltd. (AMS) specializes in the application of corrosion protective coatings, passive fire protection, composite repair, blast protection and acoustic
More informationTHE BENEFITS. Facts/Figures
PERFORMANCE BASED LOGISTICS TRACK RECORD OF SUCCESS BAE Systems Large Aircraft Mr Tim Deacon, Nimrod Project Engineering Manager says of the IFS solution: Integrated Asset Management is an innovative solution
More informationThe vision of the Ham Baker Group is to be the partner of
HAM BAKER GROUP HAM BAKER GROUP Established in the 19th Century, The Ham Baker Group is a market leading, global organisation dedicated to the design and manufacture of innovative products, for the water,
More informationCella Energy Safe, low cost hydrogen storage. Chris Hobbs
Cella Energy Safe, low cost hydrogen storage Chris Hobbs Cella Material Solid State Hydrogen Storage Plastic like pellet formedmaterial 1 litre H 2 per gram Low toxicity can be handled Heated above 120⁰C
More informationFactsheet. UP Resins
Factsheet UP Resins & you COMPOSITE MATERIALS UP RESINS What is a UP Resin? Unsaturated Polyester Resins (UP Resins) are durable, resinous polymers dissolved in styrene. They are used in combination with
More informationMAGB HEALTH, SAFETY AND ENVIRONMENT GROUP POLLUTION INCIDENT RESPONSE PLAN
MAGB HEALTH, SAFETY AND ENVIRONMENT GROUP POLLUTION INCIDENT RESPONSE PLAN SCOPE: This guidance sets out best practice for producing a Pollution Incident Response Plan to deal with an environmental incident
More informationIntegrated electronics for enhanced performance, energy efficiency and reduced emissions
Integrated electronics for enhanced performance, energy efficiency and reduced emissions A SHARED DRIVE Hyperdrive Innovation develops powertrain systems for electric, hybrid and conventionally powered
More informationFUEL STORAGE Chap. 3 AIRCRAFT FUEL SYSTEMS
UNIVERSITY OF SALENTO SCHOOL OF INDUSTRIAL ENGINEERING DEPT. OF ENGINEERING FOR INNOVATION Lecce-Brindisi (Italy) MASTER OF SCIENCE IN AEROSPACE ENGINEERING PROPULSION AND COMBUSTION FUEL STORAGE Chap.
More informationINTEC Engineering GmbH Heating Solutions for the Marine Industry
INTEC Engineering GmbH Heating Solutions for the Marine Industry Thermal Oil Heaters Heating Solutions for the Marine Industry Compared to conventional plants using hot water or steam, thermal oil as a
More informationENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
More informationReach for the skies. The Aerospace Growth Partnership. Industry and government working together to secure the future for UK aerospace
Reach for the skies The Aerospace Growth Partnership Industry and government working together to secure the future for UK aerospace Maintaining our leadership as an aerospace nation The UK has a great
More informationTechnology and Innovation for the Future of Composites Manufacturing
Technology and Innovation for the Future of Composites Manufacturing Ben Davies Sophie Wendes 15 th July 2014 Overview of Presentation Introduction to Sophie Wendes and Ben Davies GKN Overview Overview
More informationINFORMATION BULLETIN BUSINESS FLOOD PLANNING AND MITIGATION GUIDE ACE GLOBAL RISK ENGINEERING. Flood risk assessment. Introduction
ACE GLOBAL RISK ENGINEERING INFORMATION BULLETIN BUSINESS FLOOD PLANNING AND MITIGATION GUIDE Introduction The most common cause of flooding is due to established water storage areas (natural and man-made)
More informationFluid Automation Solutions
Fluid Automation Solutions www.asconumatics.com Our markets Wherever goods and materials are manufactured, processed, or packaged, ASCO Numatics solutions are found. We serve a wide range of industrial
More informationPLANT LOCATION AND LAYOUT
PLANT LOCATION AND LAYOUT The Location Of The Plant Can Have A Crucial Effect On The Profitability Of A Project, And The Scope For Future Expansion. Many Factors Must Be Considered When Selecting A Suitable
More informationModuSec. Secure and efficient IT room solutions. Turnkey Modular Construction Fast clean build to any size or shape
ModuSec Secure and efficient IT room solutions Turnkey Modular Construction Fast clean build to any size or shape Room in room Standalone external build Transportable Modusec SR Options Modusec SR Options
More informationDelcam s Aerospace Heritage
Delcam s Aerospace Heritage With over 30 years CADCAM experience and now the world s largest specialist supplier of machining software, Delcam plc provides aerospace solutions for civil, military, rotary
More informationAdvanced Medical Transport
Sometimes, Intensive Care needs to be mobile Advanced Medical Transport 1 The micus - aero Bed to Bed - no need to switch between different stretcher systems when changing transportation modes Integrated
More informationAdvanced Medical Transport
Sometimes, Intensive Care needs to be mobile Advanced Medical Transport 1 AMT Solutions Flexible and cost effective lightweight medical interiors for a wide range of aircrafts, helicopters and road vehicles
More informationDesign and manufacture of subsea and topside composite cables and connectors
Overview Design and manufacture of subsea and topside composite cables and connectors Hydro Group. sales@hydrogroup.plc.uk www.hydrogroup-asia.com tel: +65 63343566 fax: +65 63343566 1 : 5 Hydro Group
More informationAvionics Instruments Accessories Calibrations
Avionics Instruments Accessories Calibrations Since 1946, OTTO Instrument Service has earned an international reputation for providing superior overhaul and repair, manufacturing, and distribution services
More informationHelicopter Search and Rescue Emergency Medical Services / Air Ambulance
www.erahelicopters.com www.priority1airrescue.com Helicopter Search and Rescue Emergency Medical Services / Air Ambulance Life Saving Capabilities 24/7 Solely Dedicated SAR/Emergency Medical Services Helicopter
More informationComplete course list. Taught
Complete course list Taught Course name Available awards Mode Advanced Materials MSc/PgDip/PgCert Full-time/Part-time Advanced Mechanical Engineering MSc Full-time/Part-time Advanced Motorsport Engineering
More informationSURVITEC: BETTER BY DESIGN
www.survitecgroup.com SURVITEC: BETTER BY DESIGN BESPOKE Product DESIGN AND PRODUCTION SERVICE Supporting customers with technology based solutions Advanced research and design capabilities Global operation
More informationYou count on availability. We provide reliable solutions.
You count on availability. We provide reliable solutions. Your global partner for military aviation Customers around the globe are faced with challenges every day, including increased demands on fleet
More informationFlexible Circuits and Interconnection Solutions
Flexible Circuits and Interconnection Solutions Introduction Our "Mission" is "to demonstrate through our unrivalled capability and service that Teknoflex sets the standard in the design, manufacture and
More informationCLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
More informationWorld Fuel Services Corporation Overview
World Fuel Services Corporation Overview About World Fuel Services World Fuel Services Corporation (NYSE: INT) is a global leader in fuel logistics, specializing in the marketing, sale and distribution
More informationIntroduction to Aircraft Design and Aviation Systems (ENG3005)
Chapter 3 Emergency power generation 1. Power distribution 1.1 The power source for many civil aircraft: a.main aircraft generator : through a Generator Control Breaker (GCB). Controlled by Generator Control
More informationDESIGN & PROJECT MANAGEMENT
AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,
More informationMorgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
More informationAccumulators and Receivers
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Accumulators and Receivers Catalog C-1, October 2007 Page 2 / Catalog
More informationOver 70 percent of all Porsche vehicles ever built are still on the road today. We make sure it stays that way. Porsche Classic genuine parts.
Porsche Classic Product Highlights 01 2013 Intro. Over 70 percent of all Porsche vehicles ever built are still on the road today. We make sure it stays that way. Porsche Classic genuine parts. The aim
More informationA. Air-Conditioning and Refrigeration Institute: 1. ARI 850 - Commercial and Industrial Air Filter Equipment.
SECTION 23 40 00 - HVAC AIR CLEANING DEVICES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Activated carbon filters. 2. Extended surface rigid air filter with synthetic media. 3. Disposable panel
More informationEmergency Drinking Water Supply
Emergency Drinking Water Supply Seb Fisher Managing Director, Groundwater Engineering February 2014 Company Profile Groundwater Engineering is an international company specializing in water well engineering,
More informationUS&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Contractor Equip & Helicopter Ops
US&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Equip and Methods + Helicopter Ops 22Mar08 1 Unit Objective You will be able to explain how demolition contractors and their
More informationFire Protection of Data Centres
Fire Protection of Data Centres With SEM-SAFE High-Pressure Water Mist System Danfoss Semco A/S Total Solution Provider of Certified Fixed Fire Fighting Systems Need a fire fighting system that: Allows
More informationCONNECTING TALENT, IMPROVING BUSINESS
CONNECTING TALENT, IMPROVING BUSINESS Aviation experts We supply: Carbon60 are specialists in providing flexible and cost-effective engineering and technical experts. We connect the best industry professionals
More informationREGISTRATION OF INTEREST
A B C Adhesives and Sealants Advertising Air Cargo Transport Air Conditioners Air Conditioning Installation or Maintenance or Repair Services Air Filters Ambulance Services Arborist Services Architectural
More informationAerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration
P R E S S I N F O R M A T I O N Aerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration More North American-based Airbus Group, Inc. resources made available to bring the supersonic
More informationAppendix J3 - Outline Fuel Spill Contingency Response Plan. Control room receives call on fuel spill from staff or public
Appendix J3 - Outline Fuel Spill Contingency Response Plan Control room receives call on fuel spill from staff or public Initial Actions to be taken after Fuel Spill reported Identification of the source
More informationLOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and
More informationLubricant Solutions for the Rail Industry
FUCHS Industrial Lubricants Innovative solutions need experienced application engineers Every lubricant change should be preceded by expert consultation on the application in question. Only then can the
More informationCompetency Framework for Marine Engineer Class 6. Competency Framework for Marine Engineer Class 6
Table of Contents (MEC 6)... 1 Function: Operate Vessel Machinery and Systems... 1 Diesel engines.... 1 Operational procedures.... 3 Operate and monitor a vessel s engines and auxiliary equipment.... 4
More informationUK AEROSPACE SURVEY. www.adsgroup.org.uk +44 (0) 20 7091 4500. The survey is produced by Mike Lee, Head of Market Intelligence surveys@adsgroup.org.
UK AEROSPACE SURVEY The survey is produced by Mike Lee, Head of Market Intelligence surveys@adsgroup.org.uk ADS Group Limited Salamanca Square 9 Albert Embankment London SE1 7SP enquiries@adsgroup.org.uk
More informationManufacturing Capabilities
Manufacturing Capabilities Sealite is the world s fastest growing manufacturer of marine aids to navigation. We employ leading engineers to create innovative products to service the needs of our customers
More informationEmployment Generation thru VET
Employment Generation thru VET VET means Vocational Education & Training Notes & Observations: 1. An attempt has been made to broadly explain the main areas of the world economy where trained manpower
More information