Quick Start Guide Vodafone Business Connect

Transcription

1 Quick Start Guide Vodafone Business Connect

2 Safety instructions Read the following instructions carefully. Failure to comply with these instructions can be dangerous and/or illegal. You are solely responsible for how your is used and for the consequences of its use. Do not activate the device in places where the use of wireless products is prohibited or where it can cause interference or hazards. Installing your easily! Follow the steps described in this guide to install your device easily. A complete package contains the following: Read the Safety information section Do not use the device at refueling stations The device may generate intense or flashing light Do not rely on this device for emergency communications Maintain a distance of at least 0 cm from the Do not dispose of the device in fire Small parts may cause chocking Power adapter Avoid contact with magnetic media The device may generate intense noise Two Ethernet/LAN cables (yellow) Avoid extreme temperatures Keep it away from pacemakers and other individual medical devices Avoid contact with liquids Keep the device dry Two DSL/LINE telephone cables (grey) Deactivate the device when asked to do so in hospitals and medical facilities Do not try to disassemble the device Deactivate the device in explosive environments ADSL splitter Use only authorized accessories This product is recyclable. Dispose of it appropriately Declaration of conformity EN008V.6. (00-07), ΕΝ V.. (00-08ΧΕΝ V.. (00-08), Safety ΕΝ :00 In compliance with the provisions of Directives 89/6/EEC, 9//EEC, 9/68/EEC, 99/5/EEC and LVD 7//EEC. In compliance with Annex III to Directive 999/5/EC. FCC approved ADSL filter To find the latest version of the Short Installation Guide or other information, visit

3 Telephone socket 6 Telephone set ADSL filter Installation steps to activate the Internet access service Internet products from Vodafone. For these products, fixed telephony is offered via a third provider: Wi-Fi button: Press to activate/deactivate Wi-Fi Telephone set Disconnect the landline cable from the power socket on the wall. Insert the telephone cable into the PHONE port of the ADSL splitter. Connect the ADSL splitter to the telephone socket on the wall. 5 ADSL splitter 5 6 Insert the grey DSL/LINE cable into the grey DSL port of the. Insert the other end of the cable into the DSL (or Modem) port of the ADSL splitter. If you want to set up a wired connection to your computer (laptop or PC), insert one end of the yellow LAN/Ethernet cable into one of the corresponding (yellow) ports on the back of the. Insert the other end of the cable into the Ethernet/LAN port of your computer. Insert the power adapter into a power socket and the other end of the cable into the appropriate port on the back of the device. 6. If you are using more than one telephone sets on the same line, you will need to insert an ADSL filter between the telephone set and the corresponding telephone socket. We suggest that you do not use more than telephone sets. Power socket Computer (PC/laptop) Telephone socket

4 Wi-Fi button: Press to activate/deactivate Wi-Fi Telephone set Telephone set Installation steps to activate the combined fixed telephony and Internet access service Disconnect the landline cable from the telephone socket on the wall. Insert the grey DSL/LINE telephone cable into the grey DSL port of the. Insert the other end of the cable into the telephone socket on the wall. If you have purchased the relevant service, connect your two telephone sets to the first and second black PHONE ports of the Vodafone DSL Router. If you want to set up a wired connection to your computer (laptop or PC), insert one end of the yellow LAN/Ethernet cable into one of the corresponding (yellow) ports on the back of the. Insert the other end of the cable into the Ethernet/LAN port of your computer. Insert the power adapter into a power socket and the other end of the cable into the appropriate port on the back of the device. Power socket Computer (PC/laptop) Telephone socket

5 Front illuminated indicators A Installation options A Wireless Internet connection Turn on your computer s wireless connection (Wi- Fi) by following its manufacturer s instructions. From the list of available wireless networks, choose the one designated as Vodafone-XXXXX, where ΧΧΧΧΧ are the last 5 digits of the device serial number printed on the back of the Vodafone DSL Router, in the (S/N) field. When the Wi-Fi Key is requested, enter the WPA alphanumerical key printed on the back of the. B Direct Internet access with computer Vodafone Mobile Internet services Alternatively, you may connect to the Internet through a Vodafone Mobile Broadband service plan, by using the Vodafone USB modem. Insert the Vodafone USB modem to the back of the Wi-Fi button and indicator: B To complete the settings, follow the corresponding instructions in the User Guide. Power supply indicator USB indicator Telephone line indicator 5 Ethernet indicator 6 7 New voice message Battery charge indicator Vodafone USB modem 8 9 ADSL indicator Broadband indicator Installation options Installation help and instructions: Visit or call 99 (Corporate Customer Care Department) free of charge from you Vodafone mobile. To connect to the Internet via the Vodafone USB modem, you should have activated the computer (desktop or laptop) Vodafone Mobile Broadband service plan. Corresponding charges shall apply.

6 Safety information Safety information Radio frequency exposure limits To avoid the possibility of exceeding the radio frequency exposure limits, you, or anybody else who is around, must be at least 0 cm away from the aerial linked to the. Young children Keep the and its components out of reach of children and do not allow children to play with the router. They may be injured, cause injuries to others or damage the Vodafone DSL Router. The includes small pointed parts which can cause injuries or become detached and cause chocking. Interference The includes a transmitter and a receiver. When on, it receives and transmits radio frequency energy. You must be careful when using the very near individual medical devices, such as pacemakers and hearing aids. All wireless products are sensitive to interference which may affect their performance. The is designed for operation at a distance of at least 0 cm from any individual. Failure to comply with this instruction may lead to exposure to radio frequency energy in excess of the limits set forth in relevant directives. Pacemakers Pacemaker manufacturers suggest that a pacemaker should be at least 5 cm away from a wireless device to avoid possible interference between the device and the pacemaker. Hearing aids Hearing aids or other cochlear implants users may experience noise interference when using, or being close to, wireless devices. The level of interference depends on the type of the aid and the distance from the source of interference. You may reduce interference by moving further away from the source. Consult your hearing aid manufacturer for alternative solutions. Medical devices To find out whether the could affect the operation of your medical device, consult with your doctor and the device manufacturer. Hospitals To prevent possible interference with sensitive medical equipment, deactivate your wireless device when requested to do so in hospitals, clinics or health facilities. Explosive environments Where there is a possible explosive atmosphere, you must comply with all posted instructions and must, upon request, deactivate the or any other wireless device. Areas with possible explosive environments are refueling stations, spaces under boat decks, fuel or chemical transportation or storage facilities, as well as areas where the air contains chemicals or particles (such as grains, dust or suspended metallic particles). Battery The device is accompanied by a rechargeable battery pack. Do not expose the battery to excessive heat or flame. Do not immerse the battery in water. Do not subject the battery to strong blows or let it come in contact with drops. Do not disassemble or modify the battery for any reason whatsoever. Do not keep the battery discharged. Charge the battery at temperatures ranging between 0 C and +5 C. Do not keep the battery with less than 50% of its original capacity or at a temperature other than specified. Explosion areas To avoid causing interference with explosion operations, you must deactivate the when you are in explosion areas or in areas where there are signs instructing you to deactivate two-way wireless devices or electronic devices. Watch out for warnings, comply with restrictions and observe all the rules. DO NOT use this product near water, for example in a damp basement or close to a swimming pool. DO NOT expose the device to moisture, dust or corrosive liquids. DO NOT place objects on the device. DO NOT install, use or maintain the device during a storm. There is slight risk of electrocution. Connect ONLY appropriate components to the device. DO NOT open the device or unit. If you open or remove the covers, you may be exposed to dangerously high voltages or other hazards. ONLY specialized and knowledgeable technicians should service or disassemble the device. Contact your supplier for more information. Make sure that you have inserted cables into the correct ports. Place the connection cables carefully to eliminate any possibility of somebody stepping or stumbling on them. Make sure that you have disconnected all cables from the device before you take it for servicing or disassemble it. Use ONLY an appropriate power adapter or cable for your device. Connect the power adapter or cable to an appropriate power supply line (e.g. 0V AC in Northern America or 0V AC in Europe). DO NOT let anything come into contact with the power adapter or cable and DO NOT place the product in a place where somebody could step or stumble on it. DO NOT use the device if the power adapter or cable is damaged. There is a risk of electrocution. If the power adapter or cable is damaged, disconnect it from the power socket. DO NOT try to repair the power adapter or cable. Contact your nearest supplier and buy a new one. DO NOT use the device outdoors. Make sure that all connections are located indoors. There is slight risk of electrocution. DO NOT block the device ventilation openings. Insufficient air flow may damage the device. Use only a telecommunications cable no. 6 AWG (American Wire Gauge) or a cable of a higher cross section. Aerial warning! This device complies with the ETSI and FCC certification requirements when used with the accompanying aerial(s). Use only the accompanying aerial(s). If you mount the device on the wall, make sure not to cause any damage to power, gas or water lines.

7 - Tzavella St., 5 Chalandri Tel.: , Fax: CUSTOMER CARE DEPARTMENT 99 (free of charge from Vodafone mobiles), (free of charge from landlines)