section d-rings section d-rings vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 73
|
|
- Alicia Lester
- 7 years ago
- Views:
Transcription
1 vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 73
2 No X No X82X* Three-point system with 34" rods, rod guides and offset cam. No X Same as X except 2-point system. No X Without bracket and screws. Weight:.30 lbs. No XU With bracket screws and offset cam. Weight:.2 lbs. No X Straight cam without bracket and screws. Weight:.30 lbs. No XU Straight cam with bracket and screws. Weight:.44 lbs. request quote No XU This versatile recessed drop-handle latch is available in a variety of finishes and latching options. Of special interest is the adjustable grip ranges of the cam from 7/8" to 1". The basic latch incorporates a chrome steel, recessed pan with a drop handle, and crossbar cast onto a threaded, stainless steel shank. Either a straight or offset cam can be provided. Another version incorporates an adapter plate and screws for mounting. Finally, the latch can be converted into a multipoint system: three-point, with the addition of two rods and related brackets; or two-point with modification of the center pawl. Finish: Chrome-plated pan and handle with zinc-plated cams. No X Recessed pan and handle only. No cam. Weight:.28 lbs. No U-15 Adapter plate and screws for installation of handle. Available zinc-plated. Weight:.14 lbs. Other options available. Consult factory. 74 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
3 No. 90-U Drop D-Ring Latch Blind Mount. No. 90-U The No. 90 Drop D-Ring Latch Series is similar to Eberhard s No Series. The blind-mount latch can be easily attached to a panel with the bracket. The stylized rectangular shape complements modern cabinetry design. Both are available with adjustable cams, which offer a grip range of.78" to 1.38". Choice of 1-, 2- or 3-point latching. Materials: Receptacle: Carbon steel; chrome-plated and bright-polished. Drop D and Crossbar: Zinc die cast; chrome-plated and bright polished. Cam, Mounting Nuts, Washers and Bracket: Carbon steel; zinc-plated. No. 91-U No. 91-U Weight:.52 lbs. No Offset Cam No Drop D-Ring Latch with Mounting Holes. No U Same as No. 91-U, except comes with a straight cam instead. No U Mounting bracket and screws for installation of handle. Weight:.14 lbs. Other options available. Consult factory. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 75
4 No SS (large flange) No SS Key-Locking. No SS Non-Key-Locking. Eberhard large heavy-duty drop D-rings are excellent selections for the fire truck/ rescue vehicle applications where easy access and a bright modern appearance are required. No SS Large, bright-polished, stainless steel, drop D-handle, key-locking with 5/1" square shank 3-13/1" long from mounting surface. Handle is zinc die cast black powder coated. Four 7/32" dia. mounting holes are standard. Finish: Bright polished stainless steel Weight: 1.33 lbs. Available zinc-plated or stainless steel No SS (small flange) No SS Same as 9000-SS except Non- Key-Locking with smaller flange. Finish: Bright polished stainless steel Weight:.88 lbs. No Available zinc-plated or stainless steel TM No SSPL (large flange) No SSPL Pillar Lock version. Can be used with Slam Lock 20 Series (pg. 2). Flange Gaskets Available: No X gasket for large flange. No X gasket for small flange. Material: Black Buna-n 70 Durometer. Rubber 3/4" thick. Note: Photos of products that are shown do not necessarily show resting place of handle. 7 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
5 No SSR&L Key-locking single-point D-ring latch. Furnished in bright polished stainless steel with black coated handle. No R&L Carbon steel zinc-plated. Weight: 1.50 lbs. No SSR&L Non-Key-Locking stainless steel single-point. No R&L Carbon steel zinc-plated. Weight: 1.05 lbs. No SSR TM Left-Hand Opposite MID-SIZE D-RINGS No. 900-SSR&L Three-point key-locking D-ring. No. 901-SSR&L Three-point nonlocking D-ring. No SSR&L Single-point key-locking D-ring with 1/4-20 mounting studs. No SSR&L Same as SSR&L except with handle resting in the opposite position. No. 900-SSR No SSR&L Key-Locking D-ring latch set up for two-point applications. This latch has two 1/4" dia. studs for attaching rods. Eberhard No /8" dia. rods and No rod guides are recommended. Bright polished stainless steel with black coated handle. No R&L Carbon steel zinc-plated. Weight: 1.48 lbs. No SSR&L Bright polished nonlocking stainless steel. No R&L Carbon steel zinc-plated. Weight: 1.03 lbs. No SSR TM Flange Gaskets Available: No X for large flange. No X for small flange. Other versions available. Consult factory. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 77
6 No SSR (small flange) TM No SSR&L Key-locking D-ring Latch set up for three-point applications same as 9010-SS R&L single-point with additional studs for rod attachment. Furnished in bright polished stainless steel with black coated handle. No R&L Carbon steel zinc-plated. Weight: 1.50 lbs. No SSR&L Nonlocking bright polished stainless steel. No R&L Carbon steel zinc-plated. Weight: 1.05 lbs. No SSR-32 Key-locking polished stainless steel with 1/4-20 mounting studs. Flange gaskets available: No X for large flange. No X for small flange. No P5 Fastener package that includes cotter pins and bumpers. Other versions available. Consult factory. No UR (large flange) No U Typical three-point key-locking system. Order rods (No Series), rod guides (No ), and fastener pack (No P5) separately. 78 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
7 RETURN SPRINGS No SSX-R&L 2-point D-ring with mounting holes, key locking, and spring return handle. Available in brushed satin finish or polished stainless steel. No SSX-R&L No. 14W-9120-SSR&L 2-point D-ring with.2 dia. mounting holes, key locking, spring return handle, and water resistant O-ring. No. 14W-9121-SSR&L Nonlocking version. No. 14W-9120-SSR No. 15W-9120DB-SSR&L 2-point D-ring with.2" dia. holes, key locking with double-bitted cylinder, return spring, gasket attached, and water resistant feature. Polished stainless steel finish. No. 15W-9120DB-SXR&L Same as 15W-9120DB-SSR&L except studs for rods are in opposite positions. No. 15WP-9120DB-SSR&L Same as 15W-9120DB-SSR&L except with power cylinder. No. 15W-9120DB-SSR Note: Photos of products that are shown do not necessarily show resting place of handle. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 79
8 No PR&L Noncompression, nonlocking. No PR&L Noncompression, locking. The 1900/1901 Series was designed to work with any of Eberhard s 10 and 20 Series slam latches or dead bolt latches 54, 558, and 511 Series that have a.31" square hole. This series D-ring was designed to provide a new look and also include more standard features that customers usually have to order extra on other D-ring styles. The D-ring is made of a die cast material, available in chrome or black powder coat finish and fits standard industry cutouts. The standard features include blind mounting for security and appearance, large ergonomic diecast handle with padlockable feature for ease of gripping, locking versions of double-bitted key cylinder that comes with two keys, gasket comes preinstalled from the factory, water resistant construction, and key cylinder cover on all locking versions. All locking versions are shipped without the key cylinder plug for ease of stocking. (Order separately) No DB-KEY# Quick-Loc cylinder plug for manual assemblies. No DB-KEY# Quick-Loc cylinder plug for Power-Up assemblies. To order parts with key cylinder installed from factory: No R&L-03 (Key #201). Custom logos on keys available. Consult factory. Other variations available. Consult factory. Models available to work with Eberhard Power-Up system. Consult factory. See page EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
9 J201 J201 No Noncompression, nonlocking, available in chrome or black powder coat finish. No No Noncompression, locking. No. P-1900 Noncompression. Set up to work with Power-Up TM locking system. No PR&L 2-point, locking. No PR&L 2-point, nonlocking. No PR&L 2-point, locking, spring return. No PR&L 2-point, nonlocking, spring return. No PR.10 [MM2.54] [MM100.07] 1.15 C L [MM29.19].25 [MM.35] EBERHARD.187 THK. GASKET #10-24 THREAD STUDS.75 [19.05].50 [12.70] DOOR ROTATION 7.00 [177.80] 7.39 [187.2] HANDLE ROTATION 90 TO LOCK [MM100.07] 1.45 [MM3.70] No PR&L Single-point, nonlocking. No PR&L Single-point, locking. No UNLOCKED.75 [19.05] 1.00 [MM25.41].50 [12.70] UNLOCKED 7.00 [177.80] HANDLE ROTATION 90 TO LOCK [MM100.07] C L LOCKED #10-24 THREAD STUDS DOOR ROTATION 7.39 [187.2] [MM100.07] 1.45 [MM3.70] LOCKED No PR&L 3-point, locking. No PR&L 3-point, nonlocking. No PR&L UNLOCKED.75 [19.05] 1.00 [MM25.41].50 [12.70] 7.00 UNLOCKED [177.80] HANDLE ROTATION 90 TO LOCK [MM100.07] C L LOCKED #10-24 THREAD STUDS DOOR ROTATION LOCKED 7.39 [187.2] [MM100.07] 1.45 [MM3.70] EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 81
10 No PKR&L LOCKED Unlocked position Unlocked position No PKR&L The Series is a composite D-ring that can be used as a single or multipoint latch. The latch features blind mounting for security and appearance, gasket preinstalled from factory, double-bitted key cylinder installed at factory with two keys, adjustable roller latch for easy operation and tight sealing, large ergonomic die cast handle for activating, padlockable feature built into handle, key cylinder cover on all locking versions, two rod adapters for 5/1" rods (one shipped loose, other attached from factory), and able to be used with Power-Up TM. Available in black composite receptacle with chrome handle (03) or black composite receptacle with black powder coated handle (30). No UR&L Three-point assembly, key-locking, two 48" rods with nylon rollers and bend (shipped loose), and two rod adapters for 5/1" rods. See No Series rods on page 115 for different length. LOCKED For more information consult factory for other variations. Logo or name can be put on key. Consult factory. 82 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
11 No PKR Locking. No PKR 1.12 OPEN 1.22 CLOSED.7 OPEN.87 CLOSED HANDLE ROTATION 90 This series D-ring fits most other standard D-ring cutouts and can be used in panel ranges of.7" to 1.12". Product features a large ergonomic die cast handle with padlockable feature, water resistant construction, key cylinder cover on all locking versions, blind mounting for appearance and security, used double-bitted key with padlock cylinders with over-molded keys, adjustable compression roller for tight sealing and ease of operation, gasket preinstalled at factory, two rod guides for 5/1" rods (one shipped loose, one installed at factory), and able to work with Power-Up system All locking versions are shipped without the key cylinder plug for ease of stocking. (Order separately.) HANDLE ROTATION 90 No DB-KEY-09 Quick-Loc cylinder plug for manual assemblies. ø.33 No DB-KEY-09 Quick-Loc cylinder plug for Power-Up assemblies Quick-Loc feature allows customers to insert specific key numbers as they are needed in the production process..90 No R&L Nonlocking. #10-24 THREAED STUDS KEY CYLINDER COVER ROTATION ROTATE TO OPEN SPRING CLOSED KEY CYLINDER COVER LOOP FOR 1/4" PAD LOCK No. P R&L Setup to be used with the Power-Up Locking System. (Order cylinder separately.) To order parts with key cylinder installed from factory: No R-03 (Key Number is 201). Optional Features: Customer logo or name on keys available. Consult factory. Other variations available. Consult factory. See No or No X Series rods for multipoint systems. R2.44 R.55 SUGGESTED CUTOUT 2.94 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 83
12 No SSPKL No SSPKR&L 1/4-20 X 3/4 WLED STUD MAXIMUM FASTENING TORQUE REQUIRED 25/35 IN./LBS SQ. 90º ROTATION SEALED / 2.05 OPEN.80 SEALED / 1.00 OPEN The is similar to our 9000 Series D-rings except it has an adjustable roller latch which incorporates compression in the latch to allow the door to close tighter and easier. The latch can be used as a single or multipoint latch and comes with a double-bitted key with padlock cylinder and two keys, key cylinder cover, large die cast handle, two rod adapters for 5/1" rods (one shipped loose, other attached from factory), four mounting studs for security and appearance. Ø Available in polished stainless steel pan and chrome-plated handle (03) or polished stainless steel pan with black powder handle (30). No SSUR&L Three-point assembly, key locking, two 48" rods with offset and nylon rollers (shipped loose), and two rod adapters for 5/1" rods. Logo or name can be added to keys. Consult factory LESS GASKET DOOR BODY.00 R R.55 SUGGESTED CUTOUT 84 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
www.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
More informationLocks, Latches, Inserts, & Handles Flush Locks Illustration Sheet and Catalog Number. Type 1 Enclosure Flush Lock. New Flush lock
Locks, Latches, Inserts, & Handles Flush Locks Illustration Sheet and Type 1 Panel Enclosure Flush Lock Type 1 Enclosure Flush Lock T1EFL New Flush lock.886 dia. (22) Hole Pattern Detail Flush Locks are
More informationPHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
More informationCatalog Number L (in.) L (mm) ACLJIC 1.25 32. Catalog Number ACLSN12 1.69 43 APLKJIC APLKJIC6SS
Spec-00479 G763.422.2211 763.422.2600 Locks, Lockouts, Latches, Handles and Clamps Locks Locks, Lockouts, Latches, Handles and Clamps Locks Lock Kit for Clamp Cover Junction Boxes L (in.) L (mm) ACLJIC
More informationType 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
More informationDOOR STOP SERIES. www.shengjiu.com LS531 LS532 ERP LS531F3A100001. Main material: Black PC ERP LS532N00000001. Accessories.
Accessories LS531 DOOR STOP SERIES Electronic Handle Cylinder Main material and finish: Bright chrome plated steel Panel LS5 Main material: Black PC LS531F3A100001 LS5N00000001 TX80 P245 TX0-3 P247 TX100-A
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationTriMark. Service & Replacement Parts
TriMark Service & Replacement Parts TriMark Service and Replacement Parts provides the standard vehicular hardware products and keys to OEM s in the construction, agriculture, truck (on and off-road),
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationCabinet Locks. Benefits:
Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty
More informationSarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover
Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub
More informationMUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
More informationSecurity Screen Door Hardware
Security Screen Door Hardware 10YEAR whitco.com.au Contents Leichhardt Tasman MK2 Tasman Escape Tasman MK3 Sliding Security Screen Door Lock Security Door Lock Security Door Lock Security Door Lock page
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationNo. 4820 No. 4820 Junior Paddle Latch, Stepped Pan Versions Available Finishes: No. 4821 No. 4821 Junior Paddle Latch Available Finishes:
No. 4820 Non-Key-Locking No. 4820 Junior Paddle Latch, Stepped Pan Versions Non-key-locking slam latch for single-point engagement. Easily operated by pulling the handle outward. 4820 is without mounting
More informationCylinder head, removing and replacing
15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More informationHOW CABINET LOCKS ARE USED
Through your CompX Chicago distributor... a program to meet your lock requirements. CompX Chicago manufactures a wide variety of locks for residential, commercial and industrial use. We ve been solving
More informationDYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationTIE ROD END DESIGN TUTORIAL
TIE ROD END DESIGN TUTORIAL THE FOLLOWING IS A SIMPLIFIED STEP-BY-STEP GUIDE INTENDED TO ILLUSTRATE THE DECISIONS AND COMPROMISES INVOLVED IN DESIGNING A TIE ROD END. THE PROCESS FOR DESIGNING ANY BALL
More informationAmerican- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationAssembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
More informationTOYOTA TUNDRA 2015 Billet Grille w/led DRL
TOYOTA TUNDRA 2015 Billet Grille w/led DRL Part Number: 00016-34088 Accessory Code: BG3000 Conflicts Models 1794 and Platinum Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationSolstice/Sky Water Pump Replacement
Solstice/Sky Water Pump Replacement The water pump on the Solstice/Sky is starting to need replacement on some vehicles. This guide will help in replacing the water pump while the engine is still in the
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationAndersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationRose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
More informationINSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationThe lock block mounting system is universally compatible and allows permanent interchangeability of handles and front sides.
The Versus concept consists of the combination of a universal lock block and a choice of front and rear sides and handles. This creative design allows for complete freedom of expression with sliding frame
More informationWashroom Accessories Service Parts List Price Book 0215WSP
TEL: 800.BRADLEY FAX: 262.251.5817 bradleycorp.com Washroom Accessories Service Parts Book 0215WSP Table of Contents Hair-Hand Dryers (Models 2870 thru 2874, 2889, 2896, & 2897) 2 Hand Dryers (Models 2875-28
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationCAM L10. Application: Electric panels, machinery covers
CAM L10 Particular Features: Specially designed internal spring provides 1,5 mm torsion Cam does not rotate beyond quarter turn due to lid stop IP65 is optional Application: Electric panels, machinery
More informationInstallation Instructions Avalanche XUV Cap IMPORTANT! IMPORTANT!
Installation Instructions Avalanche XUV Cap IMPORTANT! Read all instructions carefully before commencing any work. Always wear safety equipment. Some installation steps will require two or more installers.
More informationINSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
More informationAssembly Instructions Model 1544 Heart-Of-The-Kitchen Island
Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island A. These units are Ready-to-Assemble. Catskill uses positive fastening methods such as wood screws and in some places hidden Bastion fasteners.
More informationEuro Profile Mortice Locks
Euro Profile Mortice Locks We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Optimum Hinged Door Optimum Hinged Door Optimum Sliding Door Pinnacle
More informationMirrors Rétroviseurs Espejos
Mirrors 171 7" X 16" REMOTE-CONTROL HEATED WEST COAST MIRROR 40% lighter than competitive similar models Stainless steel housing resists corrosion Complete wiring, control switch and simple installation
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationOver 80 years of service to the security industry. A Cut Above. The proven Ace II. original tubular lock, with its all brass.
A Cut Above. The proven Ace II original tubular lock, with its all brass construction and patented assembly process, provides professional locksmiths and their customers with excellent security at value
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationTech Bulletin. Hose / Cord Replacement and Required Wraps. Series RT
Tech Bulletin Hose / Cord Replacement and Required Wraps Series RT Replacing the Hose To remove the hose - Pull out the hose leaving 2 to 3 feet on the spool. Engage the latch pawl. Remove the U-bolt nuts
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationSLACK PERFORMANCE KARTS
SLACK PERFORMANCE KARTS SET UP GUIDE Thank you for purchasing a 2013 Slack Axiom Chassis. Performance Mfg. strives to provide you with the very best chassis and components on the market today. Your satisfaction
More informationInstallation Instructions 6028.801
DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationPOWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents
-J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More information4,000 6,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad
More informationQM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
More informationBEDFORD DORMOBILE PARTS LIST JUNE 2016
BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationOregon Fuel Injection
Corporate Office: P.O. Box 21121, VE Pump Removal and Installation Cummins Lock Timed Applications Removal Clean the exterior of the injection pump and mounting surfaces. 1. Disconnect the fuel return
More informationFOR ANY QUESTIONS, PLEASE CALL US @ 727.347.9915 M-F 8:00a.m.-8:00p.m. EST. REAR BRAKES 1 AEROSPACE COMPONENTS 727.347.9915
REAR BRAKES 1 AEROSPACE COMPONENTS 727.347.9915 REAR BRAKES Before getting started, remove all stock braking components. Pre-assembly of parts: Clean the bolts and the threads in the hat with acetone.
More informationInstallation Manual. Toilet Partitions, Dressing Compartments & Shower Stalls
Installation Manual Toilet Partitions, Dressing Compartments & Shower Stalls Metpar Corp 95 State Street, Westbury, New York, USA, 11590 Tel: 516-333-2600 Fax: 516-333-2618 Internet: http://www.metpar.com
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationROLLING CURTAIN DOOR INSTALLATION, MAINTENANCE & PARTS MANUAL WINDLOCK MODEL 955WL
ROLLING CURTAIN DOOR INSTALLATION, MAINTENANCE & PARTS MANUAL WINDLOCK MODEL 955WL Read manual thoroughly prior to installing door. Rolling steel doors are large, heavy objects that move with the help
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationINSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
More information2011-14 F250 6 RADIUS ARM KIT
92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More informationELECTRICAL CONNECTORS
ELECTRICAL CONNECTORS 07-09 00-09 04-09 99-09 116 ELECTRICAL CONNECTORS LIGHT POWER MODULES WORKS WITH STANDARD & LED BULBS! WORKS WITH STANDARD & LED BULBS! CALL US TODAY FOR YOUR MODULITE VEHICLE APPLICATION
More information2740 Whitten Rd Bldg 103 Memphis, TN 38133 Telephone 901-380-9290 Email Bwilliams@Dieselcare.net
Fuel Injection Pump Replacement REMOVAL Diesel Care & Performance Inc 1. Disconnect negative battery terminal. 2. Remove throttle linkage. Fuel Injection Pump Bracket 3. Remove injection pump bracket.
More informationFAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW SCHEDULE 4/1/2011 SUPERSEDES 6/9/08 SPILL CONTAINMENT and STREET ACCESS MANHOLES for UNDERGROUND and ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES HEAVY DUTY STREET MANHOLES
More informationInformation Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
More informationInnovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
More informationTechnical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationFAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW PRICE SCHEDULE 4/1/201 SUPERSEDES 4/1/11 SPILL CONTAINMENT And STREET ACCESS MANHOLES for UNDERGROUND And ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES MONITOR WELL SERIES
More informationASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationHürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
More information2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationINSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
More informationRIM MOUNTED AND DUAL ACCESS LOCKS
RIM MOUNTED AND DUAL ACCESS LOCKS Introduction Introduction UNION offers a range of rim-mounted and dual access locks, which are ideal for commercial and residential use. The range includes rim locks and
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationEXHAUST SYSTEMS MAGNAFLOW SERIES STERN DRIVE EXHAUST SYSTEM
EXHAUST SYSTEMS MAGNAFLOW SERIES STERN DRIVE EXHAUST SYSTEM Glenwood s Magnaflow Series Stern Drive Exhaust System is a lightweight and affordable replacement for stock cast-iron MerCruiser, OMC and Volvo
More informationTRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
More informationStructural Holding System
Structural Holding System Users Manual November 2013 by Vehicle Service Group. All rights reserved. CO8812.1 502071 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies
More informationHigh Flow Air Cleaner Assembly
34-0112 High Flow Air Cleaner Assembly 34-0114 34-1128 34-0113 34-0105 34-0178 Big Sucker Air Filter Kits for Carbureted or Fuel Injected Twin Cam and EV2 Big Twin Models. The all-in-one backing plate
More information6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
More informationPadlocks. 146 Padlocks FEATURES
146 Padlocks Padlocks FEATURES Medeco 3 BiLevel Medeco X4 CLIQ Medeco XT Nexgen Protector II Protector II body accepts 6 pin knob style cylinders Protector II is available as key retaining only System
More informationTOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER
P MODEL 3150/38 W16R STAPLER IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators
More informationGEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction
GEH6290 g Cable Operator Mechanisms for E150, SE150, SF250, and SG600 Spectra RMS Circuit Breakers Type SCH1/1X, SCH2/2X Flange-Mounted Handle Assemblies, Cable Series SC3L SC10L and Type SC0M1A, SCOM1EF,
More informationCR25 Cable Roller Guide
INSTRUCTION MANUAL CR25 Cable Roller Guide Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 52022071 2005 Greenlee Textron Inc.
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationAERO FILLER CAPS. BAT Inc. w 7630 Matoaka Road., Sarasota, FL. 34243 w (941) 355-0005 fax (941) 355-4683
AERO FILLER CAPS BAT Inc. w 7630 Matoaka Road., Sarasota, FL. 34243 w (941) 355-0005 fax (941) 355-4683 FUEL FILLER CAPS Aero type flush fitting caps draw inspiration from fuel filler caps used on American
More informationTUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1
Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More information