Solar LED Street Light

Transcription

1 Solar LED Street Light Copyright of 2014 Jiaxing Surefine New Energy Co., LTD. Phone: Fax: / 13

2 How solar street lighting system works: When the sun shines during the day, the solar panel converts solar energy to electrical energy and stores it in the battery. During the night, the battery is discharged, releasing electrical energy to power the LED luminaire hence lighting the road. 2 / 13

3 Solar Street Light System (Designed by the weather of Jiaxing, China) Solar street light with single arm 20W Solar LED Street Light 1 Led lamp 12V20W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 17.5V60W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 12V65AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 12V5A, IP68 Solar charge controller 5 Solar bracket Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery box PVC underground boxes (or steel box on the pole) 8 Pole 4m, Hot-dip galvanized (painting is optional), with anchor bolts 30W Solar LED Street Light 1 Led lamp 12V30W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 17.5V100W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 12V100AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 12V5A, IP68 Solar charge controller 5 Solar bracket Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery box PVC underground boxes (or steel box on the pole) 7 Wire & screw Fixture light cables, and solar panel cables with connector sockets 8 Pole 5m, Hot-dip galvanized (painting is optional), with anchor bolts 40W Solar LED Street Light 1 Led lamp 12V40W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 17.5V120W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 12V120AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 12V10A, IP68 Solar charge controller 5 Solar bracket Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery box PVC underground boxes (or steel box on the pole) 8 Pole 6m, Hot-dip galvanized (painting is optional), with anchor bolts 3 / 13

4 60W Solar LED Street Light 1 Led lamp 24V60W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 35V160W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 24V80AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 24V10A, IP68 Solar charge controller 5 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery boxes PVC underground boxes (or steel box on the pole) 8 Pole 7m, Hot-dip galvanized (painting is optional), with anchor bolts 80W Solar LED Street Light 1 Led lamp 24V80W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 35V220W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 24V120AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 24V10A, IP68 Solar charge controller 5 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery boxes PVC underground boxes (or steel box on the pole) 8 Pole 8m, Hot-dip galvanized (painting is optional), with anchor bolts 100W Solar LED Street Light 1 Led lamp 24V100W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 35V260W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 24V135AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 24V10A, IP68 Solar charge controller 5 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery boxes PVC underground boxes (or steel box on the pole) 8 Pole 9m, Hot-dip galvanized (painting is optional), with anchor bolts 4 / 13

5 Solar street light with twin arms 30W Double Solar LED Street Lights 1 Led lamp 12V30W (2pcs), Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 17.5V100W (2pcs), Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 12V100AH (2pcs), deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 12V10A, IP68 Solar charge controller 5 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery boxes PVC underground boxes (or steel box on the pole) 8 Pole 5m, Hot-dip galvanized (painting is optional), with anchor bolts 40W Double Solar LED Street Lights 1 Led lamp 12V40W (2pcs), Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 17.5V120W (2pcs), Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 12V120AH (2pcs), deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 12V10A, IP68 Solar charge controller 5 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery boxes PVC underground boxes (or steel box on the pole) 8 Pole 6m, Hot-dip galvanized (painting is optional), with anchor bolts 60W Double Solar LED Street Lights 1 Led lamp 24V60W (2pcs), Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 35V160W (2pcs), Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Gel battery 24V80AH (2pcs), deep cycle, 7years lifespan, CE/UL/ IEC certificate 4 Controller 24V15A, IP68 Solar charge controller 5 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 6 Battery boxes PVC underground boxes (or steel box on the pole) 8 Pole 7m, Hot-dip galvanized (painting is optional), with anchor bolts 5 / 13

6 Hybrid Solar & Wind Street Light 60W Hybrid Solar & Wind Street Light 1 Led lamp 24V60W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 35V100W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Wind turbine 24V40W Wind turbine 4 Gel battery 24V80AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 5 Controller Wind solar hybrid controller 6 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 7 Battery boxes PVC underground boxes (or steel box on the pole) 8 Wire & screws Fixture light cables, and solar panel cables with connector sockets 9 Pole 8m, Hot-dip galvanized (painting is optional), with anchor bolts 80W Hybrid Solar & Wind Street Light 1 Led lamp 24V80W, Cree/Philip LEDs; 10years lifespan; CE/UL certificate 2 Solar panel 35V180W, Mono/Poly solar panel; 25years lifespan; CE/UL/ IEC certificate 3 Wind turbine 24V40W Wind turbine 4 Gel battery 24V150AH, deep cycle, 7years lifespan, CE/UL/ IEC certificate 5 Controller Wind solar hybrid controller 6 Solar brackets Hot-dip galvanized, heavy and high strength structure, angle customized 7 Battery boxes PVC underground boxes (or steel box on the pole) 8 Wire & screws Fixture light cables, and solar panel cables with connector sockets 9 Pole 10m, Hot-dip galvanized (painting is optional), with anchor bolts 6 / 13

7 Part details: PV Panel Subsystem Surefine solar street lighting system integrates highly efficient and stable poly/mono-crystalline silicon panel that generates positive power tolerance resulting in highly efficient system performance. It offers wide range from 50W to 250W, panel output voltage at max power 17.5V is for 12V system operation, and output voltage at max power 35V is for 24V system operation. Cable subsystem Surefine solar cable subsystem is designed as plug-and-play as well as fool-proof, which ensures the easy installation, reliability. Cable subsystem includes PV cable, luminaire extension cable, and battery cable. Module Type Power Lmp Vmp Isc Voc Operating Max Wind Weight Wp(W) (A) (V) (A) (V) Temp.( o Cell Type C) Load (KPa) (kg) 50W 17V Solar Panel ~ /156x W 17.5V Solar Panel ~ /156x W 17.5V Solar Panel ~ /156x W 17.5V Solar Panel ~ /156x W 17.5V Solar Panel ~ /156x W 17.5V Solar Panel ~ /124.8x W 17.5V Solar Panel ~ /124.8x W 17.5V Solar Panel ~ /156x W 17.5V Solar Panel ~ /156x / 13

8 Battery Subsystem with battery boxes Valve Regulated Lead Acid (VRLA) Battery integrates Gel electrolyte technology with long service life, high performance in deep discharging; it can be used in wide range of ambient temperature and keep good performance of constant power input. Surefine Battery Subsystem uses lead crystal (Gel) battery, which poses long cycle life time and delivers longest deep discharge efficiency. The battery subsystem has in-ground solution as well as on-pole solution in term of mounting type. Battery subsystem In-ground solution offers flexibility of charge controller inside or outside of battery box; those are Battery subsystem with Charge controller and Battery subsystem without Charge controller. Battery subsystem with Charge controller can be used when lighting pole without service hatch. While service hatch in pole is available, battery subsystem without Charge controller is recommended, and additional charge controller should be ordered. It offers wide range of batteries from 50AH to 200AH, with 12V or 24V. Battery Capacity at 77 F (25 C) 10hr, 1.8V/cell 65AH 80AH 100AH 120AH 150AH 200AH Rated Voltage 12V Weight 20.1KG 25.4KG 28.5KG 34.3KG 42.0KG 58.0KG Internal Resistance (Lead terminal) 7.02mΩ 6.12mΩ 5.02mΩ 4.32mΩ 3.92mΩ 3.22mΩ Terminal (Lead wire) 2.5m 2 x 2m 4m 2 x 2m 4m 2 x 2m 4m 2 x 2m 4m 2 x 2m 6m 2 x 2m Length (±2mm) 350mm 329mm 329mm 406mm 483mm 522mm Dimension Width (±2mm) 166mm 172mm 172mm 174mm 170mm 240mm Container Height (±2mm) 174mm 214mm 214mm 208mm 240mm 219mm Total Height (±2mm) 174mm 236mm 236mm 232mm 240mm 244mm Max Charge Current 16.25A 20A 25A 30A 37.5A 50A Ambient Temperature -35 o C ~ 60 o C Case Material ABS Lifespan 8years 8 / 13

9 Charge Controller Features: New design of wireless remote-control can modify the controller parameter and read the system message according to the handheld device. Metal case, IP68 waterproof degree, can suitable use in all kinds of bad conditions. Digital high precision constant-current control, the maximum efficiency can reach 96%. Record the system status, can record at a max 7days and monitor the whole system. The working current can be adjusted from 0.15A to 3.3A, the regulating precision is 30mA. High dynamic performances of load insure current output stability even though the battery voltage and load sudden change. 3 section time frame dimming function design, work time can be set range from 0h to 15 hours, power can be set range from 0% to 100%. Intelligent power mode, the load power can be adjust automatically according to the battery power, can extend the maximum working time of the battery. The true constant current but not limited the current, insure the current output stability thus decrease LED light failure, increase the LED service life. 1With modified calculation of charging, the charging efficiency is improved, which lengthen the using time of solar energy. Overheat preventing function, above a certain temperature will decrease the load or close the load. Parameter name Parameter value Adjustable Default Model SR-DH100 SR-DH50 SR-DH20 System voltage 12V/24V 12V/24V 12V Output power 50W/12V,100W/24V 25W/12V,50W/24V 20W Output current 0.15A~3.3A 0.15A~1.98A 0.15A~1.67A 330mA No-load loss 9mA/12V; 12mA / 24V 9 ma /12V Charging current 15A 8A 5A Solar input voltage < 55V < 30V Efficiency of constant current 90% ~96% Overvoltage protection 16.0V; 2/24V Charging limits voltage 15.5V; 2/24V Equal charging voltage 15.2V; 2/24V(25 ) Equal charging interval 30 days Ascending charging voltage 14.2V ~15.0V; 2/24V(25 ) 14.4V Float charging voltage 13.2V ~14.0V; 2/24V(25 ) 13.8V over-discharging recover voltage 12.0V ~13.0V; 2/24V 12.6V over-discharging voltage 9.8V ~11.8V; 2/24V 11.0V Temperature compensation -4.0mv/ /2V; Current precision ±3%(Load current>300ma) Load output voltage <60V <60V <60V over-temperature protection ambient temperature:80 (load drop power) overheat protection internal temperature:120 (Load off) Working temperature -35 ~+65 ; Protection level IP68 Weight 280g 170g 160g Dimension 100*82*20mm 58*82*20mm 9 / 13

10 Remote controller Features Wireless IR remote one-to-one control, can set SR-DH series products. Communication adopts multiply handshake protocol along with data compress algorithm, for a fast and quick data communication. Double AA battery supplying power. LCD displays parameter and working data. Auto sleep if no operation within 1 minute and can be awaken by press any key. Ultralow power consumption in sleeping mode, less than 0.1uA. Quick awaken response. Indication for battery capacity status. Emergency lighting and warning signal available. Ergonomic design, suit for hand operation. Technical Remote controller model Battery model SR-CU Power supply voltage 3.0V Effective distance power consumed of sleep mode Normal power consumed Send instant power consumed Light consumption Backlight consumption Size (L W H) Weight Auto power off time Backlight time Lighting time 2000mAH battery setting quantity (AA) 2pcs <5m <0.1uA 9mA <50mA 20mA 18mA 122mm 61.5mm 22mm 60g (Not including the battery) 1 min 10 S 10 S pcs (back light and lights both are closed) Working temperature -25 ~ / 13

11 Led Lamp (Special designed for solar street lighting system) Features: Modular pluggable technology, tool-free onsite maintenance; Honeycomb briquette burning effect and the whole structure cooling technology; Double-coupling IP68 protection, higher waterproof level; Ergonomic light distribution to achieve even illuminating effect; Free serialization and various power solutions. Special Technical Advantages of Surefine Modular Lights: Honeycomb Briquette effect It simulates and adopts the burning principle of honeycomb briquette; it is easy to transform the original block of radiator to various modules, as well as to enable air to convert and fully pass through the gaps between modules by utilizing the honeycomb effect, thus to remove the heat rapidly, and reduce temperature by around 20 o C. Heat dissipation of the whole structure It is available to make clever use of module bracket that only play a supporting role, and to transform it to a "thermal bracket" that is capable of conducting the module's heat to the light shell as a structural part, thus to promote the cooling effect of radiator of cooling module, the design aims to fully utilize the surface area of structural parts to transfer heat to air. Tool-free maintenance It uses special structural design to achieve the manual disassembly and installation of lighting components, in consideration that the high-power lights are generally installed in higher operating environment, the operators require as few tools as possible for their convenience and security. Double-coupling IP68 protection It adopts the screw-free structure to avoid the penetration of water vapor through the screw hole; its double silicon-rubber rings insulate LEDs with the outside environment completely, thus to eliminate any erosion to chips and PCB boards from outside. High-efficacy LED Light source It adopts Philips lumileds LUXEON T LED source with super efficacy and light output from a compact source. Optimized for efficacy driven applications with typical Vf: 2.7V and low thermal resistance: 3K/W. Specified, targeted and tested hot, at real world operating temperatures, Tj=85 to ensure in- application performance. Free Serialization It is available to freely equip with different numbers of modules to achieve different powers as required. 11 / 13

12 Light distribution Bat-wing ISO- brightness Specifications: Model Name System Power LED Qty. Input Voltage Luminous Efficency CCT Lighting Distribution LED Brand SF-T1B-30 30W 14*1 100±5 lm/w SF-T1B-40 40W 16*1 12V DC 100±5 lm/w SF-T1B-50 50W 18*1 95±5 lm/w SF-T1B-60 60W 18*2 100±5 lm/w SF-T1B-80 80W 18*2 24V DC 100±5 lm/w 3000±300K 4000±300K 5000±300K 5700±300K Batwing & ISO brightness Philips- Lumileds Luxeon T SF-T1B W 18*2 95±5 lm/w 12 / 13

13 13 / 13 Jiaxing Surefine New Energy Co., LTD. Phone: Fax: eco@surefinegroup.com