Schneider Electric Conext XW

Transcription

1 Schneider Electric

2 Conext TM XW System One Solution for Global Power is an adaptable pure sine wave, single-phase and three-phase inverter/charger system with global grid-tie functionality and dual AC power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further adaptability. From single units to multiple clusters of units, up to 36kW each, the is a scalable system that allows for the integration of solar capacity as required. Adaptable and scalable, the Schneider Electric system is the One Solution for global grid-interactive and off-grid, residential and commercial, solar and backup power applications. Why Select? Easy to Install Devices Configure Quickly into a Stylish Wall Mounted System Inverters Connect Both Grid and Power with Dual AC Input Flexible Adapts to Single and Three-phase Systems Scales for Residential or Large Power Installations Supports DC Coupled and AC Coupled Solutions Easy to Service Remote Monitoring and Configuration Replaceable Boards and Components Global Support Higher Return on Investment Products Shown: Schneider Electric inverter/charger, XW PDP, XW CB, and MPPT solar charge controller Sell Power to the Utility with Global Grid Sell Function Harness the Continuously Declining Production Cost of Solar Power Hybrid Integration of Reduces Diesel Fuel Costs

3 Applications for the > Commercial Backup Power > Residential Backup Power > Commercial Grid-interactive Solar with Backup > Residential Grid-interactive Solar with Backup > Residential Off-grid Solar > Commercial Off-grid Solar with Backup > Community Electrification The Future The grid interactive feature-set is a key enabler for residential self consumption systems and utility demand response systems. supports both AC Coupled and DC Coupled self-consumption models. Communications functionality allows utility operators remote access to. is compatible with Lithium Ion battery packs.

4 > Commercial Backup Power Grid Commercial Load integrates with commercial building switchgear to seamlessly and instantly convert power from battery reserves to maintain operation of critical loads such as security, data and communication systems, as well as pumps and machinery when the power grid fails or browns out. When utility power is readily available, the will keep the battery bank fully charged, ready for the next time. systems can be scaled up to 36kW and configured for single-phase, split-phase or three-phase power. The easily integrates with a generator for extended backup time. > Commercial Grid-interactive Solar with Backup PV Modules Solar Charge Controller Grid Commercial Load In addition to providing backup power for commercial operations, the easily integrates Photovoltaic (PV) power reducing business dependency on utility power by offsetting consumption and increasing the return on investment. can also manage load shifting to avoid expensive time-of-day electricity charges. Integrating PV power in regions with weak or intermittent grid power will allow businesses to operate for extended periods of time without grid power. systems can be scaled up to 36kW and configured for single-phase, split-phase or three-phase power. The easily integrates with a generator to further increase business operating time when the grid is down. The control and monitoring capabilities of the system provides businesses with management information to ensure dependability is maintained and systems operate as they should.

5 > Commercial Off-grid Solar PV Modules Solar Charge Controller Residential Load Wherever independent off-grid power is required for the operation of remote farms, monitoring stations, telecom towers or work camps, the is a cost effective replacement for a diesel generator. If PV production is insufficient or unavailable to meet demand, a generator can be integrated by the and managed by the Automatic Start (AGS) module to assist with loads and recharge batteries as required. For existing off-grid diesel generator power systems, integrating a will facilitate the decrease in both generator run time and corresponding fuel costs. The control and monitoring capabilities of the system provides power management information for operators and peace of mind that remote property is secure and power dependent systems are operating as they should.

6 > Residential Backup Power Grid Residential Load Homeowners embrace the because it allows for fully-automated, hassle-free, backup power. Unlike a plug-in backup power pack or portable generator, the inverter/charger is integrated into the electrical system and seamlessly converts power from battery reserves to support critical loads such as pumps, security systems, refrigerators and electronics in the event of a power outage or brown-out. When utility power is readily available, the XW will keep the battery bank fully charged and ready for the next grid failure. The easily integrates with a generator for extended backup power. > Residential Grid-interactive Solar with Backup PV Modules Solar Charge Controller Grid Residential Load In addition to providing residential backup power, the s ability to easily integrate PV power will help reduce household dependency on utility power by offsetting consumption. supports DC coupled and AC coupled grid-tie systems. s grid-interactive feature also provides a means to sell excess power back to the utility, qualifying homeowners for locally available feed-in tariff programs and green tax credits, further increasing the return on investment. The easily integrates with a generator for extended backup power.

7 > Residential Off-grid Solar PV Modules Solar Charge Controller Residential Load For off-grid home owners, inverter chargers provide AC power from batteries. systems Maximum Power Point Tracking (MPPT) solar charge controllers enable PV modules to directly charge batteries. The pure sine wave output and high surge capabilities of Conext XW inverter/chargers start and run pumps with ease, enabling key water and sewage systems, and assisting smaller generators in starting difficult loads. The can integrate a fuel based generator enabling cost effective hybrid off-grid power solutions. The control and monitoring capabilities of the system provides off-grid home owners with management information to ensure dependability is maintained and systems operate as they should.

8 > Rural / Community Electrification PV Modules Solar Charge Controller Community Loads is adaptable and scalable, powering off-grid communities around the world and helping them qualify for renewable energy funding programs to establish reliable, high-quality localized community power plants. By coupling to renewable PV energy generation through the DC system, delivers a more affordable AC power solution than traditional off-grid systems that rely on power supplied from diesel generators alone. community based off-grid systems scale up in 36 kw clusters and are expandable at any time. supplies a standard AC voltage grid, enabling communities to not only benefit from the low cost and wide variety of common AC appliances and tools, but also from the continuously declining cost of renewable PV power generation. will also integrate diesel generators into a hybrid off-grid system increasing the flexibility and reliability of the entire system while still reducing community dependence on the ever increasing cost of fuel generators. Remote system monitoring and management is available for the supervision of and supporting system components. The Schneider Electric system is the One Solution for grid-interactive and off-grid, residential and commercial, solar and backup power applications.

9 Accessories XW PDP ( ) The XW PDP Power Distribution Panel with conduit box is factory-wired and labeled to support North American code-compliant inverter installations. Additional wiring and breaker kits can be added to a single XW PDP to integrate up to three and four MPPT solar charge controllers. XW CB ( ) The XW CB Conduit Box attaches to the bottom of a single concealing all wiring creating a neat and square installation alongside both the XW PDP and MPPT Solar Charge Controllers. XW CK ( ) The XW CK Connection Kit is a wiring kit and single conduit box used to connect a second to the XW PDP. All wires are measured, pre-cut and labeled for quick and easy installation. SCP ( ) The XW SCP System Control Panel provides a single point of control to setup and monitor an entire system of inverter/chargers, MPPT Solar Charge Controllers, XW AGS modules. AGS ( ) The XW AGS Automatic Start module automatically controls activation of a generator to provide Conext XW with power to recharge depleted batteries or assist with heavy loads. The XW AGS adds intelligent power management and eliminates time spent monitoring batteries and inverter loads. Conext Combox Communication Device ( ) Operators of Conext solar systems can now remotely monitor yield performance using devices of their choice, such as personal computers, tablet devices, or building management systems. Conext CM is compatible with Xanbus protocol devices. MPPT Solar Charge Controller ( ) The MPPT Solar Charge Controller tracks the maximum power point of a photovoltaic (PV) array to deliver the maximum available DC current directly to the battery bank for charging. Deployable as stand-alone unit or in multiples, the MPPT also fully integrates with the inverter/charger as a system. MPPT Solar Charge Controller ( ) The MPPT Solar Charge Controller offers an industry-first set of features and top performance that allows for large PV array systems to be easily installed and DC Coupled to the battery bank at the lowest overall cost. Fast Sweep MPPT charging technology helps harvest the most energy available from the PV array, even in partial shade conditions. 80 A of battery charge current allows for the connection of PV arrays rated up to 600 V. Deployable as stand-alone unit or in multiples, the MPPT also fully integrates with the inverter/ charger as a system.

10 Series (230 V / 50 Hz) Device short name XW XW Electrical specifications Continuous power 4.0 kva 6.0 kva Surge rating 8.0 kva (20 sec) 12.0 kva (15 sec) Output current 17.4 A 26.1 A Peak output current 35 A 53 A Input current at rated power 178 A 131 A Type of signal True sine wave True sine wave Automatic transfer relay 56 A 56 A Typical transfer time 8 ms 8 ms DC input voltage (nominal) 25.2 V 50.4 V Input voltage limits 22 to 32 V 44 to 64 V Charging current 150 A 100 A Power factor corrected charging Auxiliary relay output 0 to 12 V, maximum 250 ma DC 0 to 12 V, maximum 250 ma DC Power consumption (search mode) < 7 W < 7 W AC input voltage (nominal) 230 V +/- 3% 230 V +/- 3% Input voltage limits (bypass/charge mode) 165 to 280 V (230 V nominal) 165 to 280 V (230 V nominal) Frequency 50 Hz +/- 0.1 Hz 50 Hz +/- 0.1 Hz AC input frequency range (bypass/charge mode) 40 to 68 Hz (50 Hz nominal) 40 to 68 Hz (50 Hz nominal) Total harmonic distortion (THD) < 5% at rated power < 5% at rated power AC connections AC1 (Grid), AC2 () AC1 (Grid), AC2 () AC input breaker 60 A single-pole 60 A single-pole Utility interactive Available Available Efficiency Peak 94.0% 95.4% General specifications IP degree of protection IP20 (sensitive electric components sealed inside enclosure) Product weight 52.5 kg (116.0 lb) 55.2 kg (121.7 lb) Shipping weight 74.0 kg (163.0 lb) 76.7 kg (169.0 lb) Product dimensions (H x W x D) 58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in) 58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in) Shipping dimensions (H x W x D) 71.1 x 57.2 x 39.4 cm 71.1 x 57.2 x 39.4 cm (28.0 x 22.5 x 15.5 in) (28.0 x 22.5 x 15.5 in) Device mounting Wall mount (backplate included) Wall mount (backplate included) Ambient air temperature for operation -25 C to 70 C (-13 F to 158 F) (power derated above 45 C (113 F)) System Network and Remote Monitoring Available Available Warranty Five-year standard Five-year standard Part number Features and options Display type Supported battery types bank size Status LEDs indicate AC In status, faults/warnings, equalize mode, On/Off and equalize button battery level. Three-character display indicates output power or charge current Flooded (default), Gel, AGM, custom Flooded (default), Gel, AGM, custom Flooded (default), Gel, AGM, custom 100 to 2000 Ah (scaled to PV array size) temperature sensor Included Included Non volatile memory Yes Yes Multiple unit configurations Single-phase: up to four parallel units. Three-phase: two units per phase Regulatory approval CE marked according to the following EU directives and standards: EMC Directive EN , EN , EN , EN Low Voltage Directive EN50178 RCM Marked and Compliant AS , AS , AS/NZS 3100 Specifications are subject to change without notice.

11 Series (120 / 240 V / 60 Hz) Device short name XW XW Electrical specifications Continuous power 4.0 kva 6.0 kva Surge rating 8.0 kva (20 sec) 12.0 kva (15 sec) Peak output current L-N: 70 A (20 sec), L-L: 35 A (20 sec) L-N: 105 A (15 sec), L-L: 52.5 A (15 sec) Input current at rated power 178 A 130 A Type of signal True sine wave True sine wave Automatic transfer relay 60 A 60 A Typical transfer time 8 ms 8 ms DC input voltage (nominal) 25.2 V 50.4 V Input voltage limits 22 to 32 V 44 to 64 V Charging current 150 A 100 A Power factor corrected charging Auxiliary relay output 0 to 12 V, maximum 250 ma DC 0 to 12 V, maximum 250 ma DC Idle consumption (search mode) < 8 W < 8 W AC input voltage (nominal) 120 / 240 V split-phase 120 / 240 V split-phase AC output voltage L-N: 120 V +/- 3%; L-L: 240 V +/- 3% L-N: 120 V +/- 3%; L-L: 240 V +/- 3% Input voltage limits (bypass/charge mode) AC1 voltage range (sell mode) L-N: 80 to 150 V (120 V nominal); L-L: 160 to 270 V (240 V nominal) L-N: 108 to 130 +/- 1.5 V; L-L: 214 to 260 +/- 3.0 V (automatically adjusts when entering sell mode) Frequency 60 +/-0.1 Hz 60 +/-0.1 Hz AC input frequency range (bypass/charge mode) AC1 frequency range (sell mode) 55 to 65 Hz (default); Hz (allowable) 59.4 to / Hz (automatically adjusts when entering sell mode) Total harmonic distortion (THD) < 5% < 5% AC connections AC1 (Grid), AC2 () AC1 (Grid), AC2 () AC input breaker 60 A two-pole 60 A two-pole Utility interactive Yes Yes CEC power rating 4.0 kw kw Efficiency Peak 94.0% 95.4% CEC weighted 91.0% 92.5% General specifications NEMA degree of protection NEMA1R (Indoor rating) (sensitive electronic components sealed inside enclosure) Product weight 52.5 kg (116.0 lb) 55.2 kg (121.7 lb) Shipping weight 74.0 kg (163.0 lb) 76.7 kg (169.0 lb) Product dimensions (H x W x D) 58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in) 58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in) Shipping dimensions (H x W x D) 71.1 x 56.5 x 26.7 cm (28.0 x 22.3 x 10.5 in) 71.1 x 56.5 x 26.7 cm (28.0 x 22.3 x 10.5 in) Ambient air temperature for operation -25 to 70 C (-13 to 158 F) (power derated above 45 C (113 F)) System Network and Remote Monitoring Available Available Warranty Five-year standard Five-year standard Part number Features and options Display type Status LEDs indicate AC In status, faults/warnings, equalize mode, battery level. Three-character display indicates output power or charge current, fault/warning codes. On/off and equalize buttons Supported battery types Flooded (default), Gel, AGM, custom Flooded (default), Gel, AGM, custom bank size 100 to 2000 Ah (scaled to PV array size) temperature sensor Included Included Multiple-unit configurations Split-phase: up to four parallel units in 120/240 V. Three-phase: up to two units per phase (six units total) Regulatory approvals Safety UL1741, CSA EMC FCC and Industry Canada Class B Interconnect IEEE 1547 and CSA Specifications are subject to change without notice.

12 Make the most of your energy Head office 35 rue Joseph Monier CS Rueil-Malmaison Tel.: +33 (0) France Schneider Electric As a global specialist in energy management with operations in more than 100 countries, Schneider Electric offers integrated solutions across multiple market segments, including leadership positions in energy and infrastructure, industrial processes, building automation, and data centres/networks, as well as a broad presence in residential applications. Focused on making energy safe, reliable, and efficient, the company's 100,000 plus employees achieved sales of 22 billion euros in 2011, through an active commitment to help individuals and organizations "Make the most of their energy". Copyright 2012 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. The mark IEEE Std TM is the registered trademark of the Institute of Electrical and Electronics Engineers, Inc. Follow us on BR _XW_01