Forte. laboratory casework system

Transcription

1 laboratory casework system 3 rd e d i t i o n

2 Casework System Setting the standards for strength and durability... by design. Welcome to the Bedcolab casework catalogue. The is our conventional floor mounted casework system. It features a sturdy gauge steel construction designed to meet or exceed the rigorous standard SEFA , of the Scientific equipment and Furniture Association. Because we know that labs sometimes need to adapt to the changing needs of the research, the cabinet has been designed using 3-D engineering software to allow for easy cabinet re-configuration even after it has been installed. With simple hand tools, the user can easily remove doors and drawers and relocated them to personalize his or her space. For that special designer look, cabinets are also available with either insert or flush overlay color coordinated wood or plastic laminate door and drawer fronts. Designed to last... built to last even longer.

3 Using this catalog Reading the product identification numbers The Bedcolab product identification number is simple, making it easy to verify that you have ordered the correct cabinet. Each number or letter in the designation represents an aspect of the cabinet. Below are examples of the product identification numbers you will see in this catalog along with an explanation of each designation: Product identification code Cabinet height A 6A 5 Quantity of drawers A standing 1 16 B sitting Cabinet style Cabinet width Drawered cabinet in. in. Doored cabinet in. in. Combination door/drawer in. in. Mixed combination door/drawer in. in. Base cabinets Cabinet height A standing B sitting Cabinet style A REV 75 Cabinet door opens to right Cabinet width Drawered cabinet in. in. Doored cabinet in. in. Combination door/drawer in. in. Mixed combination door/drawer in. in. Base cabinets Understanding the alphanumeric index For quick reference you will find an alphanumeric index of the product identification numbers at the rear of the catalog. Identifying the product in this index will lead you to the page on which the cabinet is found. It is quick and helpful for placing orders. Placing an order Placing an order for Bedcolab furniture is easy. Just remember the following steps: 1. Choose the correct product identification number Refer to the alphanumeric index at the end of the catalog and cross check it with the three dimensional drawing on the corresponding page. You will also find the cabinet dimensions. 2. Indicate your choice of options Be sure to identify which options need to be included in your order. These are the main ones to identify, special orders should be noted. a. drawer slide arms - self-closing (standard) - full extension b. hinges - black - stainless steel c. door and drawer pulls - recessed black PVC - recessed brushed aluminum - 4 stainless steel wire pulls d. locks and keying system e. fillers and gables 3. Select the colours and finishes Both liquid and powder coat paint finishes are available in a wide range of colours. Indicate your choice for the cabinet body as well as the door and drawer fronts. 4. Choose your fixtures and accessories From the accessories catalog pick out the appropriate sinks, electrical service fittings, mechanical service fittings and pipe supports. (Our project managers are always available for consulting.) Cabinet style Cabinet depth 14,, 22 Cabinet width Single door in. in. Double door in. in. Glass door in. in. Glazed door in. in. Wall and floor cases 5. Decide on a work surface The work surface material needs to be selected as well as the colour and finish. Refer to the accessories catalog. Remember, should you require any assistance, we are only a phone call away and our project managers will be pleased to help. page 1

4 Cabinet construction details Feature 1 An intermediate front horizontal rail. 2 The slide arms have ball bearing rollers. 3 A removable front center post. 4 The front post can accomodate varying arrangements of doors & drawers. 5 A wrap around cabinet body construction: sides, back and outside cornerposts are made from one sheet of gauge steel. 6 A removable back panel on all cupboard areas. 7 A slotted rear center post. 8 The cabinet body is fully-enclosed and easy to clean. 9 The 5/16 threaded leveller has a nylon glide cap. 10 The doors and drawers have sound absorbing material. 11 There are no center posts on double doors. 12 The self-closing slide arms are standard. Benefit Dust protection, additional rigidity. Long-lasting, smooth operation. Full flexibility for all door and drawer arrangements. Flexibility even after installation. Provides maximum strength and eliminates need for an applied finished back. Permits accessibility to services. Support for slide arms and shelves. Full flexibility for future needs. Easier maintenance and cleaning. Solid, sturdy and prevents scratching or marking the floor. Keeps noise to a minimum when opening and closing. Offers full opening of cabinets for easy access. Drawers remain closed, avoiding accidents or spills. page 2 13 The choice of recessed black PVC, recessed brushed aluminum or 4" stainless steel wire pulls. 14 The drawers are made extra deep. Get the right look for your lab. Additional storage capacity.

5 Standing height base cabinets A1- A1- A1- A1-1 door unit A4--2 A4--2 A4--2 A drawer 1 door unit A2- A5--2 A2- A5--2 A2- A5--2 A2- A door unit 2 drawer 2 door unit A3- A5--4 A3- A5--4 A3- A5--4 A3- A sliding door unit 4 drawer 2 door unit A4--1 A4--1 A4--1 A4--1 Reverse models are also available as a standard cabinet by adding REV to model number. page 3 1 drawer 1 door unit

6 Standing height base cabinets A6--4 A6--4 A6--4 A drawer 1 door unit A7--4 A7--4 A7--4 A7--4 A7--4 A7--4 A6--5 A7--5 A6--5 A7--5 A6--5 A7--5 A6--5 A7--5 A7--5 A7--5 A7--5 A drawer unit* A6A--5 A7--6 A6A--5 A7--6 A6A--5 A7--6 A6A--5 A7--6 A7--6 A7--6 A7--6 A drawer 1 door unit 6 drawer unit* A6A--6 A7--7 A6A--6 A7--7 A6A--6 A7--7 A6A--6 A7--7 A7--7 A7--7 A7--7 A drawer 1 door unit 7 drawer unit* A6A--7 A7--8 A6A--7 A7--8 A6A--7 A7--8 A6A--7 A7--8 A7--8 A7--8 A7--8 A drawer unit* 7 drawer 1 door unit A drawer unit* 5 drawer 1 door unit page 4 A7--4 * Double pulls on to models. Reverse models are also available as a standard cabinet by adding REV to model number.

7 Standing height base cabinets A8--5 A8--5 A8--5 A drawer unit A A A A drawer unit A8--7 A A8--7 A A8--7 A A8--7 A drawer unit 16 drawer unit A10--8 A10--8 A10--8 A10--8 A A A A A A A A drawer unit 10 drawer unit page 5 12 drawer unit

8 Standing height base cabinets A11--2 A11--2 A11--2 A file drawer unit* A11--4 A11--4 A11--4 A AS A corner sink unit** A- A- A- A- 1 door sink unit** 45 corner unit with lazy susan A16- A20- A16- A20- A16- A20- A16- A20-2 door sink unit** corner unit 4 file drawer unit* Island end sink unit A-31 Corner unit A A- A A- A- A- Corner unit * Legal or letter size file drawers with hanger bars and full extension slide arms. page 6 ** Back panel is 9" in height (229 ). Stainless steel waste chute and waste basket are available by adding "WC" and "WB" to model number. Reverse models are also available as a standard cabinet by adding REV to model number.

9 Standing height base cabinets A22- A22- A- A- A- A- A- A28- A28- A29- A29- A35- A35- A35- A35- A35- A35- A35- A35- Description Glassware drying units are equipped with electrical heating elements maximum temperature 5 F (85 C) 1V-A. Unit is equipped with an on/off switch, pilot light, and thermostatic temperature control, all pre-wired to a junction box mounted at the rear of unit. Unit is lined with 1/4 (6 ) chemical resistant liner material. Each unit has a stainless steel perforated adjustable shelf. Glassware drying unit Fixed upper panel for mounting of services. This unit is mostly used under fume hoods where services are deck mounted. 1 door remote control unit Fixed upper panel for mounting of services. This unit is mostly used under fume hoods where services are deck mounted. 2 door remote control unit Bins are not included. Bins can be supplied by adding the following letters after catalog number: - GB for galvanized steel; - SSB for stainless steel type 4; - For leak proof bin add the letters LP. 1 door bin unit Bins are not included. Bins can be supplied by adding the following letters after catalog number: - GB for galvanized steel; - SSB for stainless steel type 4; - For leak proof bin add the letters LP. Reverse models are also available as a standard cabinet by adding REV to model number. page 7 Open rack unit Two (2) adjustable shelves. 2 door bin unit

10 Flaable and acid storage cabinets A23- A23- A23-- A23-- A23- A23- A23- A23-- A23-- A23-- A25- A25- A25-- A25-- Under counter flaable solvent storage unit Description Solvent storage units meet O.S.H.A. standards and comply with N.F.P.A. code no. for flaable and combustible liquids. Two fire baffle vents are located in back of unit. Door is hinged with a continuous stainless steel hinge. Recessed base to match standard base cabinets. One adjustable shelf, two point locking handle, standard colour safety yellow. Bilingual safety label available. UL certified. Same as model no. A23 above except ( ) deep. This unit to be used under fume hoods with a 6 (2 ) diameter cupsink. Under counter flaable solvent storage unit Solvent storage units meet O.S.H.A. standards and comply with N.F.P.A. code no. for flaable and combustible liquids. Two fire baffle vents are located in back of unit. This unit has a bi-fold door with a fusible link. Recessed base to match standard base cabinets. One adjustable shelf, two point locking handle, standard colour safety yellow. Bilingual safety label available. UL certified. Under counter flaable solvent storage unit Same as model no. A23 above except ( ) deep. This unit to be used under fume hoods with a 6 (2 ) diameter cupsink. Under counter flaable solvent storage unit Unit is lined with 1/4 (6 ) chemical resistant liner material. Each unit has a stainless steel perforated adjustable shelf. Bilingual safety label available. Unit can be vented into fume hood by adding V after model number. page 8 Acid storage unit Acid storage unit Reverse models are also available as a standard cabinet by adding REV to model number. Same as model no. A25 above except ( ) deep. This unit to be used under fume hoods with a 6 (2 ) diameter cupsink.

11 Flaable and acid storage cabinets A25- A25- A25- A25-- A25-- A25-- Description Unit is lined with 1/4 (6 ) chemical resistant liner material. Each unit has a stainless steel perforated adjustable shelf. Bilingual safety label available. Unit can be vented into fume hood by adding V after model number. Acid storage unit Same as model no. A25 above except ( ) deep. This unit to be used under fume hoods with a 6 (2 ) diameter cupsink. page 9 Acid storage unit

12 Sitting height base cabinets B1- B1- B1- B1-1 door unit B4--2 B4--2 B2- B5--2 B2- B5--2 B2- B5--2 B2- B drawer 2 door unit B3- B5--4 B3- B5--4 B3- B5--4 B3- B sliding door unit 4 drawer 2 door unit B4--1 B6--3 B4--1 B6--3 B4--1 B6--3 B4--1 B6--3 B6--4 B6--4 B6--4 B drawer 1 door unit 4 drawer 1 door unit page 10 B drawer 1 door unit 2 door unit 1 drawer 1 door unit B4--2 Reverse models are also available as a standard cabinet by adding REV to model number.

13 Sitting height base cabinets 3 drawer unit* B10--8 B10--8 B10--8 B10--8 B7--3 B7--3 B7--3 B7--3 B7--3 B7--3 B7--3 B7--3 B7--4 B B7--4 B B7--4 B B7--4 B B7--4 B7--4 B7--4 B drawer unit* 8 drawer unit 10 drawer unit B7--5 B B7--5 B B7--5 B B7--5 B B7--5 B7--5 B7--5 B drawer unit* 12 drawer unit B7--6 B7--6 B7--6 B7--6 B7--6 B7--6 B7--6 B7--6 B10--6 B10--6 B10--6 B drawer unit* page 11 * Double pulls on to models. 6 drawer unit

14 Sitting height base cabinets B11--2 B11--2 B11--2 B11--2 File drawer unit* B16- B16- B B11--3 B B11--3 B11--3 B BS B Island end sink unit B11--4 B11--4 B11--4 B corner unit B11--6 B11--6 B11--6 B11--6 File drawer unit* 45 corner sink unit** B- B- B- B- 45 corner unit with lazy susan * Legal or letter size file drawers with hanger bars and full extension slide arms. ** Back panel is 9" in height (229 ). Stainless steel waste chute and waste basket are available by adding "WC" and "WB" to model number. page 12 B11--3 File drawer unit* B16-2 door sink unit** File drawer unit* 1 door sink unit** B16- Reverse models are also available as a standard cabinet by adding REV to model number.

15 Sitting height base cabinets B20- B20- B20- B20- B- B- B- B- Corner unit with 1 door (left) Corner unit with 1 door (right) Description B28- B28- B29- B29- B35- B35- B35- B35- B35- B35- B35- B35- Bins are not included. Bins can be supplied by adding the following letters after catalog number: - GB for galvanized steel; - SSB for stainless steel type 4; - For leak proof bin add the letters LP. 1 door bin unit Bins are not included. Bins can be supplied by adding the following letters after catalog number: - GB for galvanized steel; - SSB for stainless steel type 4; - For leak proof bin add the letters LP. 2 door bin unit One (1) adjustable shelf. page 13 Open rack unit

16 Knee spaces, fillers, gables and tables A46- A46- A46- A46- A46- Knee space A A B B B B A47- A51- A47- A A47- B51- B End gable A- AEFP A- AEFP A- AEFP A- AEFP A- Knee space apron End filler panel*** BEFP BEFP BEFP BEFP A49- AFFP As required A49- BFFP As required A49- A49- A49- Knee space and service cover panel* 22 A50-28 Leg set** Knee space Front filler panel*** B49- ACFP As required B49- BCFP As required B49- B49- B49- Knee space and service cover panel* Corner filler panel*** * Provides easy access to pipe space in the back. ** 2 x 2 (51 x 51 ) steel tubing, cross brack and levellers. page 14 A50-22 *** Can be made to specification.

17 Knee spaces, fillers, gables and tables Utility table with drawer A A A A A A B B B A A A A A A B B B B B B Description Special size tables are available on request. Double faced and multiple legs are available on request. Legs are 2 x 2 (51 x 51 ) 16 gauge steel tubing; aprons are 4 (100 ) gauge steel. Each leg is supplied with 2 adjustable levellers. Tables can be supplied with casters on request. Tables are shipped knock-down. Special size tables are available on request. Double faced (minimum ( ) and multiple legs are available on request. Extra drawers can be supplied by adding total number of drawers after catalog number. Legs are 2 x 2 (51 x 51 ) 16 gauge steel tubing; aprons are 4 (100 ) gauge steel. Each leg is supplied with 2 adjustable levellers. Tables can be supplied with casters on request. Tables are shipped knock-down. Utility table page

18 Wall cases Open shelf unit glazed hinged doors 2 glass sliding doors glazed hinged door 2 solid sliding doors glazed sliding doors page solid hinged door 2 solid hinged doors Reverse models are also available as a standard cabinet by adding REV to model number.

19 Wall cases Open shelf unit solid hinged door 2 glazed hinged doors 2 glass sliding doors glazed hinged door 2 solid sliding doors glazed sliding doors Reverse models are also available as a standard cabinet by adding REV to model number. page 17 2 solid hinged doors

20 Wall cases Open shelf unit glazed hinged doors glazed hinged door 2 solid sliding doors solid hinged door glass sliding doors page glazed sliding doors solid hinged doors Reverse models are also available as a standard cabinet by adding REV to model number.

21 Floor cases 1 solid hinged door 86A A A A A-- 86A-- 86A-- 86A-- 86A A A A A A A A A-- 86A-- 86A-- 86A-- 86A A A A solid hinged doors 2 solid hinged doors 4 solid hinged doors Reverse models are also available as a standard cabinet by adding REV to model number. Open shelf unit page 19

22 Floor cases A A A A A A A A A-- 87A-- 87A-- 87A-- 87A-- 87A-- 87A-- 87A-- 87A A A A A A A A glazed hinged doors page glazed hinged doors 1 glazed hinged door 2 glazed hinged doors Reverse models are also available as a standard cabinet by adding REV to model number.

23 Floor cases glass sliding doors 88A A A A A A A A A A A A A A A A A-- 90A-- 90A-- 90A-- 90A A A A glazed sliding doors 4 glazed sliding doors 4 solid sliding doors page 2 solid sliding doors

24 Bedcolab ltd 25, Francis-Hugues Avenue Laval, Quebec, Canada H7S 1N5 Phone: / Fax: info@bedcolab.com Web Site: Authorized dealer: