Integration guide for CONSIGNOR

Transcription

1

2 Integration guide for CONSIGNOR Integration with your ERP system. This document contains a description of CONSIGNOR transport administrative solution and how CONSIGNOR integrates with an ERP system. It is our aim that you observe how your company currently handles the logistics function including which types of packages are sent out and with which carrier. This information will be requested of you in a schema that we send to you. Should questions arise when reading through this document, you are most welcome to either them to us at [email protected] or call us on You can also find more information regarding integration between CONSIGNOR and your ERP system on our website at the following address 1. Concept CONSIGNOR is a system designed for easy and efficient printing of labels, to address and send goods which are to be handled and delivered by a range of carriers, for example Posten Norge, Bring, Schenker, Tollpost, DSV, DHL, Nor Lines, Ramberg, and many more who use EDI data. CONSIGNOR may also be used to print labels for carriers who are not set up to handle EDI data. For an updated list of EDI supported carriers, please see our website To avoid retyping a receiver address, CONSIGNOR contains two types of address catalogues into which receiver data can be saved. 1. The first catalogue (Address Register) is designed to contain addresses which are imported during the installation of CONSIGNOR, and is maintained as CONSIGNOR is used for production. 2. The second catalogue (Order Register) is dynamically updated during the import of data from your ERP system, and can be used to register information from an order form or requisition. It is also possible for CONSIGNOR to save this imported data in a fixed address catalogue, and thereby simplify the task of creating manual shipments. (A Microsoft Excel file, or similar, may be used should you require that a fixed address catalogue be imported for use as a fixed address catalogue. This catalogue can be continually updated by CONSIGNOR s ability to save data to this catalogue when printing labels). Most ERP systems handle mainly financial data, and therefore often have their databases protected against other users or systems from having READ access to them. EDI-Soft has therefore chosen to build the CONSIGNOR solution to dynamically update it s data via import of ASCII files which are generated by the ERP system, and which are dropped into a folder by your ERP system for CONSIGNOR to import. CONSIGNOR can also export shipping information back to your ERP system by saving shipping data into files in a folder available to your ERP system. (See Appendix 3. for further information). There is therefore no direct connection between CONSIGNOR and your ERP system. Usually there is some form of documentation to accompany shipments; Order number, Requisition number, package receipt or invoice. Most ERP systems are very flexible as regards printing these documents. Customers and suppliers of ERP systems should therefore agree upon a suitable document, which when printed from the ERP system, will generate an ASCII file with delivery information from the ERP system to CONSIGNOR. Typically, there will be specific information used in the formation of this file, the description of which is specified in the article ASCII file requirements.

3 ERP, web, or other system. CONSIGNOR Shared folder A specially designed import routine developed by EDI-Soft, imports data from ASCII files to the CONSIGNOR database. This means that printing of labels is easily and efficiently performed by the CONSIGNOR user being required to supply very little data or no data at all. CONSIGNOR offers manual, half-automatic or fully automatic printing solutions. In a half-automatic solution, data is imported into CONSIGNOR by typing in a unique reference number, e.g. Order or invoice number, where after the user may choose how many labels are to be printed, select the different the shipment weights and choose which carrier is going to handle the shipment etc. In a fully automatic solution, ALL receiver and shipping- related data is sent to CONSIGNOR from the ERP system. The ASCII file therefore needs to contain codes to determine the shipping method (carrier, product, pallet type (as required by carrier), recycle pallet type (as required by carrier), how many recycle pallets (as required by carrier), carrier services (as required by carrier), goods type (as required by carrier), receiver address, number of labels, weight, volume (as required by carrier) etc. In this fully automatic mode, the user does not need to interact with CONSIGNOR at all files are sent with a COMPLETE set of required delivery data from the ERP system to CONSIGNOR s import folder. These are automatically imported into CONSIGNOR and labels are automatically printed once the data is read into CONSIGNOR. Note:- It is of primary importance when using either half or fully-automatic printing solutions, that all of the required data (for the printing method in use) is saved into the file by the ERP system which is to be imported into CONSIGNOR and that the data is placed into the correct fields in the file. If this is not done, labels will not print as planned, but can still be manually printed with little data manipulation in CONSIGNOR. E.g.:- 1- The ERP system sends a file to CONSIGNOR with no shipment weight specification for a carrier requiring that weight be specified. If, in CONSIGNOR, this carrier requires WEIGHT as a mandatory value, then a label for that carrier with no weight specification cannot be printed from CONSIGNOR. 2- The ERP system sends data to incorrect fields, E.g. Telephone number placed into the country name field. If the file sent to CONSIGNOR by the ERP system does not have sufficient or valid information to create a shipment and print a label and CONSIGNOR is running a fully-automatic import, the data is still imported into the CONSIGNOR database, but it remains in CONSIGNOR s INBOX for further correction and the next delivery is handled by CONSIGNOR. CONSIGNOR simply stores the incorrect shipment data and begins automatically processing the next delivery with no interruption to your shipping process. The CONSIGNOR user can then manually correct the delivery information stored in the INBOX and print the label. For more information about CONSIGNOR s import, please see Appendix 1 Scenario

4 2. ASCII file requirements As concerns delivery, most information on an invoice is of relevance. When considering an import file format, we require that you send us a description of which data is to be written to the file, and into which field order the information is to be placed. We strongly recommend that you do not use data fields which are of no relevance to the way in which your deliveries are to be handled. There are over 240 different fields of data, which CONSIGNOR can import, but only very few are usually necessary. Below is a list of the current possible fields, containing necessary data, recommended data and possible data. It is important to note that should you require CONSIGNOR to run in fully-automatic mode, then some of the data which exists in the possible data section, becomes mandatory, and is therefore required. This has been marked in bold typeface in the table. Most CONSIGNOR installations that use fully-automatic printing require no more than 30 fields from the table below, even in complex setup environments. The following data is required in the ASCII file. Field Number Fields group Field name Felt navn Field Description 1 Line OrderNumber Ordrenummer Unique key (order number, invoice no.) 2 Receiver Name1 Navn 1 Receiver name Company or private person 3 Receiver Name2 Navn 2 C/O or department. 4 Receiver Address1 Adresse 1 Street/Road must be delivery address. 5 Receiver Address2 Adresse 2 Department, building, Port etc. 6 Receiver PostBox Postboks Only if this exists. 7 Receiver PbxNo Postboks postnummer Only if this exists. 8 Receiver PbxCity Postboks by Only if this exists. 9 Receiver City By Name of delivery city. 10 Receiver Country Landekode Necessary for international deliveries.

5 The following data is recommended in the ASCII file. Field Number Fields group Field name Felt navn Field description 11 Receiver CustNo Kundenummer Receiver customer number. 12 Reference Attention Kontaktperson Receiver or sender contact person. 13 Receiver adresse Required if mail back function is used in CONSIGNOR. 14 Reference Receivers Reference Mottaker referanse Requisition/invoice number. The following data is possible in the ACSII file. Fields group Field name Felt navn Field description 15 Line Number Antall kolli Number of labels to print. Required for fully-automatic printing. 16 Line Marking Merking Marking given as text, but rarely used. 17 Line Contents Innhold Parcel or pallet contents. 18 Line Weight Vekt Parcel or pallet weight Required for fully-automatic printing. Eg. Schenker. 19 Line LineWeight Linje vekt Total shipment weight. 20 Line Height Høyde Height used for volume calculation. 21 Line Length Lengde Length used for volume calculation. 22 Line Width Bredde Width used for volume calculation. 23 Line Volume Volum Volume Eg. Pallet volume. 24 Line LineVolume Linje volum Total volume for the shipment. 25 Line Loadmeter Lastemeter Loadmeter value. 26 Line RecycleType Retur gods type Recycle pallet type (PL1, PL2 etc). 27 Line RecycleNo Retur gods nummer Number of recycle pallets.

6 28 Line GoodsType Gods type (art) PL1, PL2 etc. 29 Line SpecialGoods Spesial gods Special goods, required if agreed with carrier. 30 Line ReceiverRef Mottaker referanse Receiver reference often invoice/requisition number. 31 Line OrderNumber Ordrenummer Unique search key (Order number, invoice number). 32 Line Additional Ekstra No specific description. 33 Package Label Kollinummer (Track'n Trace nummer) Contains shipment number usually exported back to ERP system, to facilitate ERP system s track and trace function. 34 Package ReceiverRef Mottaker referanse Receivers reference. 35 Package OrderNumber Ordrenummer Order number. 36 Package Additional Ekstra No description as yet. 37 Package PackageNo Pakkenummer Package number 1/3, 2/3, 3/3 etc. 38 Receiver CustNo Kundenummer Receiver s customer number. 39 Receiver Name1 Navn 1 Name of receiver company or private 40 Receiver Name2 Navn 2 Evt. C/O. 41 Receiver Address1 Adresse 1 Street/Road or delivery address. 42 Receiver Address2 Adresse 2 Department, building, Port etc. 43 Receiver PostNo Postnummer 4 digits in Norway. 44 Receiver City By Name of delivery city. 45 Receiver Country Landekode Necessary for international deliveries. 46 Receiver PostBox Postboks Only if this exists. 47 Receiver PbxNo Postboks postnummer Postcode of receiver postbox. 48 Receiver PbxCity Postboks by City name of receiver post box.

7 49 Receiver Phone Telefonnummer Required when sending COD shipments with Posten Norge. 50 Receiver Mobile Mobilnummer Used for example with SMS service for carrier Posten Norge. 51 Receiver Fax Faksnummer Receiver s fax number. 52 Receiver adresse Required when sending notification to receivers. 53 Sender CustNo Kundenummer ERP system s customer number. 54 Sender Name1 Navn 1 Alternative sender name. Note:- Dynamic Sender is only possible for use with those carriers who permit ad hoc changing of sender names on labels and in EDI files. 55 Sender Name2 Navn 2 Sender department, section etc. 56 Sender Address1 Adresse 1 Sender street/road. 57 Sender Address2 Adresse 2 Sender Department, building, port etc. 58 Sender PostNo Postnummer 4 digits in Norway. 59 Sender City By Sender s city. 60 Sender Country Landekode Sender country code. Required for international shipments. 61 Sender PostBox Postboks Provided when sending from a post box address. 62 Sender PbxNo Postboks postnummer Required when sending from a post box address. 63 Sender PbxCity Postboks by Required when sending from a post box address. 64 Sender Phone Telefonnummer Sender phone number. 65 Sender Mobile Mobilnummer Sender mobile phone number. 66 Sender Fax Faksnummer Sender fax number. 67 Sender adresse Sender address. 68 Payer CustNo Kundenummer Customer number. 69 Payer Name1 Navn 1 Payer name company or private.

8 70 Payer Name2 Navn 2 Payer department, section etc. 71 Payer Address1 Adresse 1 Payer street/road of payer address. 72 Payer Address2 Adresse 2 Payer department, building, port etc. 73 Payer PostNo Postnummer 4 digits in Norway. 74 Payer City By Payer s city name. 75 Payer Country Landekode Payer s country code e.g. DK, DE, NO. 76 Payer PostBox Postboks Only if this exists. 77 Payer PbxNo Postboks postnummer Postcode of payer s post box. 78 Payer PbxCity Postboks by Payer s city name of post box. 79 Payer Phone Telefonnummer Payer phone number. 80 Payer Mobile Mobilnummer Used for example with SMS service for carrier Posten Norge. 81 Payer Fax Faksnummer Payer s fax number. 82 Payer adresse Payer s address. 83 Buyer CustNo Kundenummer Buyer s customer number. 84 Buyer Name1 Navn 1 Buyer name company or private. 85 Buyer Name2 Navn 2 Buyer s department, section, etc. 86 Buyer Address1 Adresse 1 Buyer s street/road address. 87 Buyer Address2 Adresse 2 Department, building, port etc. 88 Buyer PostNo Postnummer 4 digits in Norway. 89 Buyer City By Buyer s city name. 90 Buyer Country Landekode Buyer s country code: e.g. DK, DE, NO. 91 Buyer PostBox Postboks Only if this exists. 92 Buyer PbxNo Postboks postnummer Buyer s post box number. 93 Buyer PbxCity Postboks by Buyer s city name of post box. 94 Buyer Phone Telefonnummer Buyer s phone number.

9 95 Buyer Mobile Mobilnummer Used for example with SMS service for carrier Posten Norge. 96 Buyer Fax Faksnummer Buyer s fax number. 97 Buyer adresse Buyer s address. 98 Product Service Groups Service grupper No description of this field. 99 Dangerous UNNumber Un nummer Contains the UN number of Dangerous Goods type. These are Transport standards that must be adhered to. EDI-Soft does not have these. 100 Dangerous Kind Type Dangerous goods type kind. These are Transport standards that must be adhered to. EDI-Soft does not have these. 101 Dangerous Name Navn Name of Dangerous goods 102 Dangerous Templates Kladd No description of this field. 103 Dangerous Description Beskrivelse Dangerous goods type description. These are Transport standards that must be adhered to. EDI-Soft does not have these. 104 Dangerous Class Klasse Dangerous goods classification. These are Transport standards that must be adhered to. EDI-Soft does not have these. 105 Dangerous Classification Code Klassifikasjons kode Dangerous goods classification code. These are Transport standards that must be adhered to. EDI-Soft does not have these 106 Dangerous PackingGroup Pakkegruppe Dangerous goods packing group specification. These are Transport standards that must be adhered to. EDI-Soft does not have these 107 Dangerous Identification Identifikasjon Dangerous goods identification. These are Transport standards that must be adhered to. EDI-Soft does not have these. 108 Dangerous GrossWeight Bruttovekt Gross weight of dangerous goods.

10 109 Dangerous NetWeight Nettovekt Nett weight of dangerous goods. 110 Dangerous Volume Volume Volume of dangerous goods. 111 Dangerous Number Pakkenummer Contains shipment barcode number of dangerous goods. 112 Dangerous EMSNumber EMS nummer Contains EMS number of dangerous goods.. These are Transport standards that must be adhered to. EDI-Soft does not have these. 113 Dangerous MfagNumber Mfag nummer Contains Mfag number of dangerous goods. These are Transport standards that must be adhered to. EDI-Soft does not have these. 114 Dangerous PageNumber Sidetall Contains a page count of dangerous goods papers. 115 Dangerous FlashPoint Flammepunkt Contains the minimum temperature that the Dangerous goods will begin to ignite and/or burn. (Combustion point) 116 Dangerous Stowing Category Pakkningskategori Category of how goods are to be packed and stored.. These are Transport standards that must be adhered to. EDI-Soft does not have these. 117 COD Amount Beløp COD amount. Given in whole numbers without a thousand separators, e.g , COD Reference Betalingsreferanse Usually invoice number, or a number used for bookkeeping purposes. Only used by a few carriers. 119 COD KID KID kode KID code follows EDI-Soft s message to Posten Norge. 120 COD Account Kontonummer Account number, GIRO number used by receiver to pay COD amount.

11 121 Insurance Amount Beløp Insurance amount. 122 Insurance Contents Innhold Insured package contents. 123 Insurance Category Kategori Insured package category. 124 Insurance adresse Sender s contact address. 125 Insurance PolicyNo Policenummer Insurance policy number. 126 Reference Ordernumber Ordrenummer Sender s order number as a receiver reference. 127 Reference ReceiverRef Mottaker referanse Reference requested by the receiver. Usually an order/requisitions/invoice number. 128 Reference Operator Betjenings medarbeider Staff member who created the order. 129 Reference Project Prosjekt Name/number of a given project running between a sender and receiver. 130 Reference Attention Kontaktperson Contact person name of sender or receiver. 131 Reference Delivery Date Leveringsdato Delivery date of shipment. This is information given by the sender, and is not something that the carrier will guarantee. 132 Reference Receivers Reference 133 Reference Receivers Customer No at Sender 134 Reference Receivers Customer No at Carrier 135 Reference Senders Reference Mottaker referanse Mottakers kundenummer hos avsender Mottakers kundenummer hos transportør Avsenders referanse Receiver reference. E.g. Invoice number. Receiver s Customer number at Sender. Receiver s Customer number at Carrier Sender s reference, often an order number.

12 136 Reference KID KID kode KID code reference follows EDI-Soft s message to Posten Norge. 137 Reference Project Name Prosjekt navn Name/number of a given project running between a sender and receiver. 138 Reference Goods Type Gods type PL1, PL2, CLL etc. 139 Reference Agent number Agent nummer If there is an agent associated with a shipment, their ID number can be given here. 140 Reference Terminal Terminal 141 Reference Carrier Account Transportør kontonummer Contains sender s account number with the carrier. Used for e.g. With payment of COD amount. 142 Reference Custom Field 1 Spesial felt 1 Free reference field that may be used for custom labels. 143 Reference Custom Field 2 Spesial felt Reference Custom Field 3 Spesial felt Reference Custom Field 4 Spesial felt Reference Custom Field 5 Spesial felt Reference Custom Field 6 Spesial felt Reference Custom Field 7 Spesial felt Reference Custom Field 8 Spesial felt Reference Custom Field 9 Spesial felt Reference Custom Field 10 Spesial felt Reference Payer Agent Number Frakt betalers agent nummer Shipment s agent ID number can be given here.

13 153 Reference Additional ordernumbers Flere Ordrenumre Used with many orders in the same shipment container. Makes combined shipping easier to control. 154 Message Driver Sjåfør Message to driver. Carrier may not support this. This will not be printed to the label 155 Message Carrier Transportør Message to carrier. Carrier may not support this. This will not be printed to the label 156 Message Receiver Mottaker Message to receiver. Carrier may not support this. This will be printed to the label. 157 Price FixedPrice Fastpris Price is primarily used when shipping/freight price is to be sent from CONSIGNOR to ERP system and can be used in the receiver invoicing process. This requires that there is a price calculation module set up in CONSIGNOR. Not all carriers can use this, given their pricing structure. 158 Price Price 1 Pris Price Price 2 Pris Price Price 3 Pris Pickup Pickupdate Avhentningsdato Collection/Pickup date of shipment. Used with predating shipments.

14 162 Shipment CarrierCode Sendingsmåte One single code to select shipping method. EG. Code 10 = Posten Norge, Bedriftspakke dør-dør. One code will be assigned to the complete shipping combination. REQUIRED FOR FULL-AUTOMATIC PRINTING. We require that you have on hand, a list of all carrier codes, as well as a list of all shipping combinations that will be used in sending shipments with these codes. 163 Shipment ShipmentKeyNo Forsendelsesnøkkel nummer No description of this field. 164 Shipment Pickup Date Avhentningsdato Collection/Pickup date of shipment. Used with predating shipments. E.g. A parcel with a label printed on 1st March, but to be collected by the carrier on 1st April. 165 Shipment Height (mm) Høyde (mm) Total shipment height in millimetres 166 Shipment Width (mm) Bredde (mm) Total shipment width in millimetres 167 Shipment Length (mm) Lengde (mm) Total shipment length in millimetres 168 Shipment Senders Account Number Avsenders kontonummer Senders account number, GIRO number used for payment of COD amount. 169 Shipment Number Sendingsnummer (Track'n Trace) Used when shipping barcode numbers are imported from the ERP system. 170 Shipment Senders Customer No at Carrier Avsenders kundenummer hos transportør Customer number at carrier. 171 Shipment LinesCount Linjeantall Total number of lines. 172 Shipment Dangerous Farlig gods Denotes whether dangerous goods are contained within the total shipment. 173 Shipment Temparature Temperatur No description of this field.

15 174 Shipment Carriage Payer Forsendelses betaler No description of this field. 175 Shipment Actor Alias Klient alias No description of this field. 176 Shipment PrinterKey Printer nøkkel Printer key alias used with fully automatic printing to more than one printer. This code denotes which printer the print job is to be sent to. 3. ASCII file format. One order per line. Fields can be separated by comma, semi-colon or other character or the data can be separated by a fixed field length. If data is character-separated, the fields should start and end with. Each line should close with a line break. 8-Bit ASCII character set must be used. Other file formats can only be used by further agreement with EDI-Soft. An example import file format could be: "10026","Audio Visuel Information ASA","31121","Stålfjøra 9","Postboks 106, NO or

16 10026 Audio Visuel information ASA Stålfjøra 9 postboks 106 NO First example is comma-separated; the second is of fixed field length. 4. Order and length. Every import setup is customised to each customer s requirements, therefore there will be a difference between file length and field order from one customer to another. What is important is that your ERP system generates delivery data into the CONSIGNOR import file in the same order each time an order is processed. CONSIGNOR s field-mapping can be created and mapped according to your own ordered data file. Similarly, carrier and printer alias codes need to be sent consistently from the ERP system to CONSIGNOR. 5. Naming of ASCII files. Importing of ASCII files into CONSIGNOR is not synchronised when saving the files to CONSIGNOR s import folder. Therefore it is necessary to observe file-naming conventions to avoid the ERP system overwriting previous files saved to CONSIGNOR s import folder. This task is the responsibility of the ERP system administrator. The following solutions to this problem are as follows:- One file same name: Some ERP systems wish to write to the same file with the same name each time a delivery is to to be registered, e.g. RUBICON ERP system. If the file does not exist, a new one will be created with a predefined filename. If the file is found, a new line will be appended within the existing file. CONSIGNOR imports and deletes this file after a successful import. One file for each order: Other ERP systems place each order into their own file. These files can advantageously be named with their order number and a fixed predefined extension. e.g txt CONSIGNOR imports all files automatically and either deletes or moves the file to a backup folder after a successful import. Many files with many orders in each file: Other ERP systems write many orders into files with unique file names. In this case, naming files after their order number is not a good idea, as there is a real risk of the ERP system overwriting files with the same order number before CONSIGNOR can import them. Unique file names should therefore be used. One solution is to use a running number series for file names, e.g. A date and time format DDTTMMSS, for Date, Hour, Minute, Second, where theoretically, there will be one full month before the ERP system can possibly overwrite the file, but by this time, and usually after less than a minute, the file will have been imported by CONSIGNOR. 6. Placement of ASCII files: A folder, which ConsignorServer Service has full control rights to, should be created on the network, for example...\\consignorserver\edisoft\import. Both the ERP system and ConsignorServer service should have full control rights to this shared folder. 7. What needs to be done before installation of CONSIGNOR? As mentioned previously, the ERP system needs to be set up so that it generates a file to CONSIGNOR s import folder on the network (see appendix 1). Once it is able to save a file to this location, and once you are sure that the file is in the correct format for your purposes, and according to the requirements of all of the carriers that you wish to use in CONSIGNOR, send us a copy of a test file, along with a description of all of the field contents to [email protected]. It is important that we receive both a test file and a description of the test file fields so that we know which fields contain what value. Once we have approved the test file, and have

17 tested that it can be used with your required carrier and infrastructural setup, will it be possible for us to set up CONSIGNOR s import module. This will be done without affecting your production, apart from a very short restart of the CONSIGNOR server service. Import does not need to be set up on the day of installation of CONSIGNOR, as this can be set up at a later date, but it usual for EDI-Soft to install an import module, should mention be made of using CONSIGNOR s import capabilities. You are always welcome to call or us with any queries you may have. We have a well grounded understanding of universal ERP systems, and will gladly discuss the deeper aspects of technical integration with you. With Kind Regards EDI-Soft Norge AS Tel [email protected]

18 Appendix 1 Scenario for automatic label printing In this scenario, we illustrate how CONSIGNOR imports data and we also familiarise you and/or your EDB supplier with an example of CONSIGNOR-ERP integration. Case: A company called EDI-Soft Norge AS sends shipments with Posten Norge. They have previously hand-written their labels as well as any other required accompanying papers. They now wish to centralise the printing of all documents and labels through CONSIGNOR, and also make use of EDIdata. At EDI-Soft Norge AS, orders are processed using the following procedure:- A telephone order is called in from a customer, and an order is created for the customer in the ERP system. When a warehouse staff member locates the required product, it is packed in a box and a message is given to the sales department that the package is ready and that an invoice may now be written out to the customer. Task: After an order is processed in the ERP system, an automatic label is to be printed with all the necessary shipping information. This happens as follows:- The Warehouse staff member decides how many packages/parcels/containers/boxes need to be sent, as well as which carrier sending method is to be used, as well as any other requirements, for example shipment weight. Once the order is completed with this information in the ERP system, this information is sent to CONSIGNOR. The comma-seperated file could look like this:- " "," "," The Super Fish Restaurant ","Spireaveien 6","0580", NO,"Oslo","Svend Jørgensen"," Package must not be left in the sun ","1","867,00","10" = Order number = Customer Number The Super Fish Restaurant = Receiver Name Spireaveien 6 = Receiver Addresse 0580 = Receiver postcode Oslo = Receiver city NO = Country code for Norway. Can also be a 3-digit ISO code, or another alias if required Svend Jørgensen = Receiver Reference Package must not be left in the sun = Message on label 1 = Amount of packages 867,00 = This is package send with COD of NOK 867,00 10 = Carrier code 10 which means in this case that it is a Posten Norge Bedriftspakke dørdør. The above is merely an example. CONSIGNOR can import a large amount of different fields, in different orders which may vary from one CONSIGNOR customer to another. It is however, important that the information is always given in the same fields every time the ERP generates a file. (If field order changes, the fields will no longer be mapped with the correct values and labels may not print) This example contains a simple import file setup, but it may be more complex in reality. Converse to the above task, it could also be required that only the delivery address be imported into CONSIGNOR, whilst shipping/delivery information is manually typed in, such as number of parcels, and product choice. This could be advantageous in a situation where only the warehouse staff will know the number of required boxes to send the shipment in, and the weight of the shipments. Thereafter they can manually print the label in CONSIGNOR. Further data handling is executed within CONSIGNOR s own database. Information on the label regarding carrier, product, services, and receiver is sent to the carrier in an EDI file. The physical label, together with this EDI information, ensures that the shipment can be delivered more effectively.

19 Appendix 2 Recommendation for Carrier Codes in import files The CarrierCode field in the import file concerns the method (Carrier + Product + services) that will be used to send the shipment from A to B. These CarrierCodes are completely your choice. Below are examples of Carrier Codes Carrier Code description Code sent from ERP system Posten Bedriftspakke dør-dør 10 Posten Servicepakke 11 Posten På Døren 12

20 Appendix 3 Export of data from CONSIGNOR to ERP System CONSIGNOR can export data back to the ERP system when a label is printed. Either one large file or small single files per shipment can be exported by CONSIGNOR. These export files should be saved to a location where your ERP system can import them. CONSIGNOR can also send these files via FTP. Files are saved once Export has been activated and configured, and exporting of files occurs seamlessly when labels are printed with no user-interaction. The setting up of the export function in CONSIGNOR is done under the menu item SETUP, but given CONSIGNOR s complexity, it s a good idea to contact EDI-Soft to discuss your export requirements, and to hear EDI-Soft s advice on the best installation location for this export module within your CONSIGNOR setup. The Export module looks like this:- Folder/Filename Tab Export is activated here Path where files are saved Required file type.txt,.inh,.csv etc. It is possible to save export data to a new file or to the same file with each label printed. If saving to a new file, you can choose either a unique filename or a consecutive number allocated by CONSIGNOR or your own order number as a file name. Export file is saved either when a label is printed, or when EDI files are transferred to the carrier Explorer option to browse and select to browse and select the Export folder. (Should be created in advance) It is possible to export to the same file every time. The file becomes larger as information is continually appended to it in the order that it is saved to the file. If this file is either deleted or moved, a new file is created with the next export from CONSIGNOR. In the field to the right, you can type in the required export file name.

21 Layout Tab Text separator to be used between export values i.e.: Comma, Semicolon etc. It is possible to select a fixed field length instead if a character separator. The field length is defined under the Setup Fields options Select the file layout: One line per shipment is one line regardless of how many packages are in the shipment. The Setup Fields option allows you to select which data is to be saved to the export file. The screen dump on the next pages is a small excerpt of some of the options. It is here where field length may be defined should you require a fixed field length export format. It is possible to have a start and end character saved in every field, e.g.. Not yet available One line per package is just exactly that. 3 packs = 3 lines One line per order means that CONSIGNOR checks how many packages are sent to a receiver and creates one line for all orders sent.

22 When Setup Fields is selected, you can select the same field values which exist in CONSIGNOR s import module. NOTE: Ordering must start with 0, 1, 2, 3 as an order for exported field data.

23 Units Tab It is possible to change between Kilograms, grams and tons It is possible to change between cubic millimeters, cubic centimeters, cubic decimeters and cubic meters. Decimal separator, e.g. 100,00 or 0,1. This is seldom used, but it is nevertheless a possibility. It is possible to change between millimeters, centimeters, decimeters and meters.

24 Transmission Tab Activate export via FTP FTP port to use, usually 21. Name or IP address of destination server Check, if authentication is required Specify a folder on the FTP server into which, export files are to be saved, if this is a requirement. FTP Username FTP Password Test the FTP connection You are welcome to contact us should you have any questions arising from this document. EDI-Soft Norge AS Tlf [email protected]