VIS METAUX TETE CYLINDRIQUE FENDUE - TC DIN 8 ISO
|
|
|
- Giles Neal
- 9 years ago
- Views:
Transcription
1 VIS METAUX TETE CYLINDRIQUE FENDUE - TC DIN 8 ISO 1207 Slotted pan-head screw VIS METAUX TETE CYLINDRIQUE LARGE FENDUE DIN 85 ISO 1580 Slotted pan-head screw VIS BOIS TETE FRAISEE BOMBEE FENDUE DIN 95 - Slotted raised countersunk head wood screw VIS BOIS TETE RONDE FENDUE DIN 96 - Slotted round head wood screw VIS BOIS TETE FRAISEE FENDUE DIN 97 - Slotted countersunk head wood screw VIS SANS TETE FENDUE BOUT CUVETTE DIN 438 ISO 7436 Slotted set screw with cup point VIS A ŒIL DIN 444B - Eye bolt VIS SANS TETE FENDUE BOUT PLAT DIN 551 ISO 4766 Slotted set crew with flat end VIS SANS TETE FENDUE BOUT CONE DIN553 ISO 7434 Slotted set screw with cone end VIS BOIS TETE HEXAGONAL = TIREFOND DIN Hexagon wood screw VIS TETE RONDE COLLET CARRE -TRCC- DIN 603 ISO 8677 Mushroom head square neck bolt VIS TETE CYLINDRIQUE SIX PANS CREUX -CHC DIN 912 ISO 4762 Hexagon socket head cap screw VIS SANS TETE SIX PANS CREUX BOUT PLAT -STHC DIN 913 ISO 4026 Hexagon socket set screw with flat point
2 Hexagon socket set screw with cone point VIS SANS TETE SIX PANS CREUX BOUT TETON -TSHC DIN 915 ISO 4028 Hexagon socket set screw with dog point VIS SANS TETE SIX PANS CREUX BOUT CUVETTE -STHC- DIN 916 ISO 4029 Hexagon socket set screw with cup point VIS TETE HEXAGONAL PARTIELLEMENT FILETEE -THPF- DIN 931 ISO 4014 Hexagon head bolt VISTETE HEXAGONALE ENTIEREMENT FILETEE -THEF DIN 933 ISO Hexagon head screw GOUJON FILETE DIN Stud DIN VIS METAUX TETE FRAISEE FENDUE - TF DIN 963 ISO 2009 Slotted countersunk head screw VIS METAUX TETE FRAISEE BOMBEE FENDUE DIN 964 ISO 2010 Slotted raised countersunk head screw VIS METAUX TETE FRAISEE POZI -TFZ DIN 965 ISO 7046 Countersunk head screw pozi VIS METAUX TETE FRAISEE BOMBEE POZI - TFBZ DIN 966 ISO 7047 Raised countersunk head screw pozi TIGE FILETEE DIN Threaded rod VIS AUTO-PERCEUSE POUR ALUMINIUM TETE FRAISEE POZI Self-drilling screw for aluminium countersunk pozi head DIN 7504P - VIS AUTO-PERCEUSE POUR ALUMINIUM TETE HEXAGONALEDIN 7504K - Self-drilling screw for aluminium hexagon head VIS AUTO-PERCEUSE POUR ALUMINIUM TETE CYLINDRIQUE LARGE POZI DIN 7504N - Self-drilling screw for aluminium pan-head pozi
3 VIS AUTO-PERCEUSE POUR ALUMINIUM TCL SR2-CARRE - CRUC DIN 7504N - Self-drilling screw for aluminium pan-head (Square - recess + cross recessed) VIS TOLE TETE CYLINDRIQUE LARGE FENDUE DIN 7971 ISO 1481 Slotted pan-head tapping screw VIS TOLE TETE FRAISEE FENDUE DIN 7972 ISO 1482 Slotted countersunk flat head tapping screw VIS TOLE TETE FRAISEE BOMBEE FENDUE DIN 7973 ISO 1483 Slotted raised countersunk (oval) head tapping screw VIS TOLE TETE HEXAGONALE DIN 7976 ISO 1479 Hexagon head tapping screw VIS TOLE TETE BOMBEE LARGE POZI DIN 7981 ISO 7049 Pan-head tapping screw (pozi) VIS TOLE TETE BOMBEE LARGE TORX DIN 7981 ISO 7049 Pan-head tapping screw (torx) VIS TOLE TETE BOMBEE LARGE SR DIN 7981 ISO 7049 Pan-head tapping screw (sr) VIS TOLE TETE FRAISEE POZI DIN 7982 ISO 7050 Countersunk (flat) head tapping screw (pozi) VIS TOLE TETE FRAISEE TORX DIN Countersunk (flat) head tapping screw (torx) VIS TOLE TETE FRAISEE SR DIN Countersunk tapping screw (sr) VIS TOLE TETE FRAISEE BOMBEE POZI DIN 7983 ISO 7051 Raised countersunk (oval) head tapping screw (pozi) VIS TETE CYLINDRIQUE BASSE SIX PANS CREUX DIN Hexagon socket thin head cap screw DIN
4 VIS METAUX TETE RONDE LARGE FENDUE "POELIER" - TRL NFE "Poelier" screw VIS METAUX TETE CYLINDRIQUE LARGE POZI - TCLZ DIN 7985 ISO 7045 Raised cheese head screw (pozi) VIS TETE CYLINDRIQUE BASSE SIX LOBES INTERNES - CZX NFE Socket thin head cap screw torx VIS TETE FRAISEE SIX LOBES INTERNES NFE Countersunk head tapping screw (torx) VIS TETE FRAISEE SIX PANS CREUX - TFHC DIN Hexagon socket countersunk head cap screw VIS TETE BOMBEE SIX PANS CREUX - TRHC - ISO 7380 Button head screw VIS TETE BOMBEE SIX PANS CREUX et TETON ANTI-EFFRACTION Socket button head screw with interior point - - ISO TETON VIS TETE FRAISEE POZI AUTO-TARAUDEUSE DIN 7500M - Thread-rolling screw with countersunk pozi head VIS TETE CYLINDRIQUE LARGE POZI AUTO-TARAUDEUSE DIN 7500C - Thread-rolling screw with cheese raised pozi head VIS TETE HEXAGONALE - ECO-FIX - - Hexagon head screw - Eco-fix PITON A VIS A BOIS - - Wood - Eyes - Woodscrew V.B.A. - VIS BOIS AGGLOMERE TETE FRAISEE POZI - VBA - - Chipboard countersunk screw pozi VIS DE PEINTURE TETE RONDE LARGE TORX - - Torx-roofing screw GOUJON A SOUDER DIN Stud standard for drawn arc welding ECROU CYLINDRIQUE FENDU DIN Slotted round nut
5 ECROU INDESSERRABLE FENDU (H=100) - - Slotted set screw with flat end ECROU CARRE DIN Square nut ECROU CARRE BAS DIN Square thin nut ECROU AUTO-CASSANT - - Self breaking nut ECROU BAS - Hm DIN 439B ISO 4035 Hexagon thin nut VIS A ANNEAU DIN Lifting eye bolt ECROU A ANNEAU DIN Lifting eye nut ECROU HEXAGONAL - Hu DIN 934 ISO 4032 Hexagon nut ECROU A SOUDER DIN Hexagon weld nut ECROU BORGNE NFE Hexagon domed cap nut ECROU A CRENEAUX - Hk DIN 935 ISO 7035 Hexagon castle nut ECROU INDESSERABLE DIN Self-locking hexagon nut ECROU BORGNE DIN Hexagon domed cap nut ECROU BORGNE INDESSERABLE DIN Hexagon domed cap nut wiht non metallic insert
6 ECROU EMBASE STRIEE DIN 6923 ISO 4161 Hexagon nut with flange ECROU DE FREINAGE DIN Self-locking counter nut ECROU HEXAGONAL HAUT - Hh NFE Hexagon thick nut ECROU A OREILLES DIN Wing nut VIS A OREILLES DIN Wing screw ENTRETOISE LISSE - - Crossbar ENTRETOISE TARAUDEE Inside threaded crossbar ENTRETOISE FILETE-TARAUDEE Inside and outside threaded crossbar ECROUS CAGE / CAGE INOX / ECROU ACIER ZINGUE - - Cage nut ECROU MOLETE HAUT DIN Knurled nut ECROU MOLETE BAS DIN Knurled thin nut VIS MOLETEE HAUTE DIN Knurled thumb screw VIS MOLETEE HAUTE FENDUE DIN Slotted knurled thum screw BOUCHON CONIQUE SIX PANS CREUX METRIQUE -GAZ- DIN Hexagon socket pipe plug
7 BOUCHON FILETE SIX PANS CREUX METRIQUE -GAZ DIN Hexagon socket screw plug BOUCHON FILETE SIX PANS METRIQUE -GAZ DIN Heavy duty hexagon screw plug ECROU A SERTIR EN AVEUGLE (tête affleurante) - - Blind nut to clinch ECROU A SERTIR EN AVEUGLE (tête plate) Blind nut to clinch RONDELLE ELASTIQUE CINTREE DIN 128A - Curved spring lock washer RONDELLE ELASTIQUE ONDULEE DIN 137A - Wave spring washer RONDELLE ELASTIQUE ONDULEE DIN 137B - Wave spring washer RONDELLE POUR VIS TETE CYLINDRIQUE DIN 433 ISO 7092 Washer for cheese head screw RONDELLE PLATE DECOUPEE DIN 125 ISO 7089 Medium washer RONDELLE GROWER SECTION RECTANGULAIRE WZ Single coil spring washer (rectangular section wz) DIN 127B - RONDELLE CUVETTE ELASTIQUE DIN Conical spring washer RONDELLE PLATE LARGE DIN 9021 ISO 7093 Large size washer RONDELLE PLATE DECOUPEE M - Z - L - LL NFE M (moyenne) - Z (étroite) - L (large) - LL (très large) Washer
8 RONDELLE GROWER SECTION CARREE W DIN Single coil spring washer (square secdtion w) RONDELLE DECOLLETEE MU -ZU - LU - CUVETTE NFE MU (moyenne) - ZU (étroite) - LU (large) Cutted washer FREIN D'ECROU MU- ZU - LU NFE MU (moyenne) - ZU (étroite) - LU (large) Tab nut RONDELLE CUVETTE NFE Curved washer RONDELLE CONTACT M NFE Contact washer RONDELLE EVENTAIL DENTURE EXTERIEURE et INTERIEUR DIN External and internal serrated lock washer A-J BAGUE D'ARRET DIN Retaining washer for shaft CIRCLIPS POUR ARBRE (EXTERIEUR) DIN Retaining ring for bore CIRCLIPS POUR ALESAGE (INTERIEUR) DIN Retaining ring for bore GOUPILLE CONIQUE DIN 1 ISO 2339 Tapper pin GOUPILLE CONIQUE CYLINDRIQUE DIN 7 ISO 2338 Parallel pin GOUPILLE CONIQUE CANNELEE DIN 1471 ISO 8744 Full-length taper grooved pin GOUPILLE FENDUE DIN 94 ISO 1234 Split pin GOUPILLE CANNELEE DIN 1472 ISO 8745 Half-length taper grooved pin
9 GOUPILLE CYLINDRIQUE CANNELEE DIN 1473 ISO 8740 Full-length parallel grooved pin with chamfer GOUPILLE ELASTIQUE DIN 1481 ISO 8752 Spring type straight pin ETRIER (SANS ECROU) DIN U-Bolt (without nut) RIVET TETE RONDE DIN 660 ISO R1051 Round head rivet RIVET TETE FRAISEE DIN 661 ISO R1051 Countersunk head rivet CLOU CANNELE TETE RONDE DIN 1476 ISO 8746 Round head grooved pin FAUSSE VIS TETE RONDE - - Round head false screw COLLIER DE SERRAGE DIN Hose clip RIVET AVEUGLE TETE PLATE DIN Blind rivet flat-head RIVET AVEUGLE TETE FRAISEE DIN Blind rivet countersunk head GOUPILLE "BETA" - - "Beta" pin FILET RAPPORTE - - Heli-coil
10 TIGE FILETEE POUR POSE CHIMIQUE - - Chemical stud AMPOULE CHIMIQUE / SCELLEMENT CHIMIQUE - - Chemical capsule / Chemical scellement Scellement chimique - - Chemical scellment GOUJON D'ANCRAGE AVEC ECROU ET RONDELLE - - Wedge anchor CHEVILLE A CONE INTERIEUR A FRAPPER - - Drop-in anchor DOUILLE A EXPANSION - - Shield anchor Câble - - Cable Serre-câble à étrier - - Wire rope clip Serre-câble- Simple plat - Double plat - - wire rope clip Cosse-cœur - - Thimble
11 Tendeur - - turnbuckle Tendeur à deux chapes - - Turnbuckle Chaîne - - Chain Maillon rapide - - Quick link Manille droite - - Dee shackle Piton fileté à œil - - Eye bolt with nut Esse symétrique - - S-hook Charnière à piano - - Butt hinge Embouts de vissage - Pozidriv - - Screw driver blade - Posidriv Embouts de vissage - Phillips - - Screw driver blade - Phillios Embouts de vissage - Torx - - Screw driver blade - Tors Embouts de vissage - Carré - - Screw driver blade - Square
12 Outil de pose pour écrou aveugle - - Hand blind nut tool Outil de pose pour rivet aveugle - - Hand riveter tool Outil de pose pneumatique pour écrou aveugle - - Pneumatic blind nut toll Outil oléo-pneumatique pour rivets aveugles standards - - Hand riveter tool - Oleo-pneumatic
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
HARDWARE SHOP COMPLETE INVENTORY TOTAL VALUE: 514.197,88
1 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x10 700 4,69 2 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x16 100 1,3 3 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x20 400 3,88 4 Screw TE 8.8 T.F. galvanized
T25-6. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I0500110 S E R V I C E IPL, T25-6, 2005-04, 544 08 55-01
S E R V I C E 8 I0500110 IPL, T25-6, 2005-04, 544 08 55-01 T25-6 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 544 08 55-01 59 183 180 59 184 58 77 40 143 72 74 1 208
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Nomenclature Trémie / Hopper - Parts list
Nomenclature Trémie / Hopper - Parts list 1 18272 Pilon / Pusher 2 18153 Bague d articulation couvercle jeu x5 / Lid hinge ring set x5 3 4259 Came / Cam 4 Axe fouloir / voir s3 / Press shaft / see s5 5
Infomail 2/2010 BPW BERGISCHE ACHSEN. repair set for spring bolt storage (adjustable support, lateral axle lifting device, welded wear plates)
BPW INFO-MAIL BPW BERGISCHE ACHSEN Vertrieb Aftermarket New Repair Sets New repair sets have been assembled to simplify spare part assignment: 09.801.07.75.0 (adjustable support, lateral axle lifting device,
SUPPORTS DE TABLETTES SUR CABLES OU TIGES INOX CABLE AND ROD SUSPENDED DIPLAY SYSTEMS
SUPPORTS DE TABLETTES SUR CABLES OU TIGES INOX CABLE AND ROD SUSPENDED DIPLAY SYSTEMS FT789 0105 Ajouter 6 de chaque côté des pochettes porte-affiche pour déterminer la distance entre les câbles. Add 6
MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
STIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
PRS X-axis E-chain installation: For tools with a 12 Z-Axis
PRS X-axis Energy Chain (Echain) Installation Page -1- PRS X-axis E-chain installation: For tools with a 12 Z-Axis This kit is compatible with PRS Shopbots that have an X-axis cutting area of 96 to 144.
VUES ECLATÉES PENELOPE - PENELOPE EXPLODED DIAGRAMS June 2009
VUES ECLATÉES PENELOPE - PENELOPE EXPLODED DIAGRAMS June 2009 CAMERA BODY 1 SE CHASSIS 2 PERFS PENELOPE CHASSIS S/A 3321001 4 SE CARTER INTERFACE FOND MAGAZINE SIDE BODY COVER S/A 3320065 5 SE CARTER INTERFACE
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Contents. Description Page Description Page
Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
Acero Inoxidable 304 Perno Cabeza Hexagonal Rosca Entera Stainless Steel 304 Hex Cap Screw Full Thread
Perno Cabeza Hexagonal Rosca Entera Hex Cap Screw Full Thread Dimensiones: ANSI B 18.2.1 Rosca: UNC ANSI B 1.1 y BSW BS 84 Dimensions: ANSI B 18.2.1 Thread: UNC ANSI B 1.1 and BSW BS 84 Prices in US$ -
BSAMG160401 M16 x 40 GAL 8.8 STRUCTURAL ASS. 100 BSAMG160451 M16 x 45 GAL 8.8 STRUCTURAL ASS. 100 BSAMG160501 M16 x 50 GAL 8.8 STRUCTURAL ASS.
B88MZ160501 HEX ISO G8.8 B/N ZNC M16 x 50 25 B88MZ0502 HEX ISO G8.8 B/N ZNC M x 50 25 B88MZ0552 HEX ISO G8.8 B/N ZNC M x 55 25 B88MZ0602 HEX ISO G8.8 B/N ZNC M x 60 25 S88MZ0502 HEX ISO G8.8 SETSCREW ZNC
Ceta Form Tool Containers & Assortments
Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
PET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1
Model 959 0 0 00-00 7 6:56.0.00 tool and accessories tool - 7 06 jack - 7 0 operating rod - 7 03 tool bag - 7 0 spark plug wrench - 0 A ring wrench 36 MM - - tyre pressure gauge L 709 0-999 57 05 0 rim
1180/16.02. Products and Services. Fastener Service Supply
1180/16.02 Products and Services Fastener Service Supply Michael W. Böllhoff and Wilhelm A. Böllhoff The Böllhoff Group We are one of the world s leading manufacturers and suppliers of fasteners and processing
Aprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
YARD CRUISER HYDRO DRIVE SERIES 1 & 2
Parts Manual for YARD CRUISER HYDRO DRIVE SERIES 1 & MODELS YZ11BE YZ181BE YZ15BVE YZ158BVE TM CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- REAR... CASTER, FRONT WHEEL & TIRE ASSM Y.... FRONT
Pièces de rechange Spare parts list PRIMO MOTOBINEUSE TILLER
Pièces de rechange Spare parts list PRIMO MOTOBINEUSE TILLER 0500000_h /200 0 39 8 2 8 29 46 32 35 34 44 36 8 3 2 4 5 38 6 45 7 48 64 74 63 65 82 49 67 83 76 62 52 73 77 80 9 79 59 50 70 3 33 22 37 68
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
BREVA S1 NOTICE PIECES DE RECHANGE CATALOGUE OF SPARE PARTS. BREVA S1 page 1 / 13
NOTICE PIECES DE RECHANGE CATALOGUE OF SPARE PARTS BREVA S APPAREIL DE MOBILISATION ARTICULAIRE PASSIVE DE LA CHEVILLE ANKLE CONTINUOUS PASSIVE MOTION DEVICE Notice N 467896288 Mise à jour le 0/07/04 Kinetec
PB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
BETRIEBSANLEITUNG / NOTICE D UTILISATION / OPERATOR S MANUAL
8140 154 11 Ersatzteilliste und Zeichnung 11.1 Typ WK 11 Liste de pièces détachées et schéma 11.1 Type WK 11 Spare Parts List and Drawing 11.1 Type WK OPERATOR S MANUAL 01 365445 Wechselstrom-Motor Moteur
The Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
ENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
Machinery's Handbook 27th Edition TABLE OF CONTENTS FASTENERS
TABLE OF CONTENTS FASTENERS NAILS, SPIKES, AND WOOD SCREWS 1476 Wire Nails and Spikes 1477 Wood Screws RIVETS AND RIVETED JOINTS 1478 Riveted Joint Design 1478 Classes and Types of Joints 1478 General
EMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
Pièces de rechange Spare parts list. L Senior
Pièces de rechange Spare parts list L Senior 0501050002_d 05/2011 1 6 20 41 26 18 33 32 9 49 2 3 31 44 3 38 30 28 14 10 42 4 29 34 35 8 4 16 2 1 21 22 23 25 11 51 45 50 39 43 48 52 46 12 36-1- Rep N Ref.
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
To Use any command in this guide: 1. Select the option from the Design Menu in the Mechanical Eng workspace.
120 1 ME Mechanical Engineers use a variety of mechanical drawings and computer tools for analysis and design. During the design process, drawings are used throughout to develop and document the design
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
INSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 [email protected]. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
Electric chain hoists LIFTKET
Electric chain hoists LIFTKET 1 Spare part list AA AB Description of spare part Page Lifting gear section 01: hoist body 4 Version 1-1.3 5 Version 2-4.2 6 Version 5-7.2 7 Version 8.1-9.1 8 Version 1AK-5.1AK
Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A.
Super G FAX Boar-AE1 PARTS CATAOG SEPTEMBER 12, 2009 REV. 0 COPYRIGHT 2009 CANON INC. CANON Super G FAX Boar-AE1 REV. 0 PRINTED IN U.S.A. PREFACE This Parts Catalog contains listings of parts use Diagrams
VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS
VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS Tools required: 10mm/13mm socket and 3/8 drive ratchet with extension Torx T20/25/30 screwdrivers or bits Phillips head screwdriver,
PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: [email protected] www.robinamerica.com Copyright 1999 Robin
125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Libreria di elementi meccanici disegnati in 3D su PRO/Engineer di Davide Donà Grignasco (NO)
Libreria di elementi meccanici disegnati in 3D su PRO/Engineer di Grignasco (NO) [email protected] DADI ALTI ESAGONALI UNI 5587 HEXAGON NUTS - THICK TYPE Specifications UNI 5587 Yes: M3 to M56 DADI
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)
Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.
DCSO244 : 001 - GENERAL VIEW [1/9]
![DCSO244 : 001 - GENERAL VIEW [1/9]](/thumbs/40/20153364.jpg "DCSO244 : 001 - GENERAL VIEW [1/9]")
DCSO244 : 001 - GENERAL VIEW [1/9] Page 1 of 18 DCSO244 : 001 - GENERAL VIEW [1/9] Ref # Part Number Qty. Description 1 001651-000 LATERAL HOLDER K2.9499 1A 000819-000 FASTENING SCREW SET,ZN PL LIGHT-COLORED
RINGFEDER. Automatic Hook Couplings for Road and Cross Country Vehicles. TYPE RUwg. Prospect
RINGFEDER E 07 00 Prospect Automatic Hook Couplings for Road and Cross Country Vehicles TYPE RUwg Automatic Hook Couplings Types RUwg K O D, K 1 D, K 2 D, K 3 D, K 4 D for towing eye according to VG 74059
USED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
DO NOT attempt to repair hub and wheel bearing assembly.
Page 1 of 6 HUB & WHEEL BEARINGS (WITH PULSE VACUUM HUBLOCK) DO NOT attempt to repair hub and wheel bearing assembly. Removal DO NOT remove hub lock assembly by prying on hub lock legs. This can crack
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: [email protected]
Version. BBI products and services offered exclusively through distribution
2013 Version BBI products and services offered exclusively through distribution Terms and Conditions of Sale GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality
Front brakes (FN- 3), servicing
j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly
S C R E W S THE ORIGINAL ROBERTSON L ORIGINAL HVAC FASTENER PROGRAM PROGRAMME HVAC
ROBERTSON S C R E W S SCRULOX THE ORIGINAL ROBERTSON L ORIGINAL HVAC FASTENER PROGRAM PROGRAMME HVAC FASTENING SYSTEM SYSTÈME DE PRISE The Original Robertson Fastening System / Système de Prise Insist
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT) Price (excl VAT) 022298 Alloy cylinder barrel, 86mm bore, 1956-on short-stroke CS models. 240.00 200.00 000217 Nut for cylinder base stud,
MIXER K45SS AND KSM75
INTERNATIONAL PART NUMBERS ITALICIZED MIXER VARIATIONS OF K45SS AND KSM75 SOLID STATE c 2003 KITCHENAID 09 03 Litho in U.S.A. (bd) This Parts List Supercedes All Previous K45SS Parts Lists. Updates Required
Rebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
POWER WAVE 455M/STT & (CE)
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-450 P-450 PARTS LIST FOR POWER WAVE 455M/STT & (CE) P-450-A P-450-A ILLUSTRATION
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
INSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
OPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1
OPERATING MANUAL BAK Thermoplastic Welding Technology AG 1 SAFETY Danger to life Unplug the tool before opening it as live components and connections are exposed. Danger of fire and explosion in case of
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts.
Tools Spares Guide Tools Spares Guide The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Throughout the guide you will find:- Exploded
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
SURFOX 304 MIG & TIG 54-D 314 (120V) & 54-D 334 (230V) MARCH 2015 1.48-R 461 5. 48-R 462 2. 48-R 313 3. 48-K 419 4. 48-S 114 6. 48-S 128 7.
A 1.48-R 461 5. 48-R 462 2. 48-R 313 6. 48-S 128 3. 48-K 419 4. 48-S 114 7. 48-R 314 9.48-R 463 8. 48-R 136 10. 48-R 105 11. 48-R 254 12. 48-R 109 13. 48-R 321 14. 48-R 214 B 15. 48-K 420 16. 48-S 228
Common Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.
Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
> CABLE 3 MM / 3 MM CABLE COMPONENTS
C3100 KIT POUR FIXATION SOL-PLAFOND (4 MÈTRES) - Fixation haute Ø 18,5 mm - Câble en acier inoxydable L. 4 m - Fixation basse avec tendeur (Clé Allen et vis fournies avec le Kit) FLOOR / CEILING FIXING
9,000lb capacity 4 Post Lift Installation Manual
9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled
THE ORIGINAL ROBERTSON L ORIGINAL
ROBERTSON S C R E W S SCRULOX THE ORIGINAL ROBERTSON L ORIGINAL ELECTRICAL FASTENER PROGRAM PROGRAMME ÉLECTRIQUES FASTENING SYSTEM SYSTÈME DE PRISE The Original Robertson Fastening System / Système de
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50
Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme
Price list spare parts Škoda Fabia R2 Valid from 28. 7. 2014. Spare parts price list
Price list spare parts Škoda Fabia R2 Valid from 28. 7. 2014 Spare parts price list Serial parts Special parts 3-9 Engine 41-42 Engine 10 Fuel tank, exhaust system, heating 43 Fuel system 11 Wheels, brakes
COMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGM2751TQ0 (WHITE) CGM2751TQ1 (WHITE) 5 12 Litho in U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. W10119631 Rev. C TOP AND CONSOLE PARTS W10119631 2 TOP AND CONSOLE
Go-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner
C-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
Ford F-250 / 350 2-1/2 Coil Kit. Ford F-250, F350 2011-2015. Part#: 013255
Part#: 013255 Ford F-250 / 350 2-1/2 Coil Kit Ford F-250, F350 2011-2015 Rev.040815 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail: [email protected]
PARTS LIST DOMESTIC. Eclipse Ergonomic Tilting Braising Pans. BPP-30E, BPP-40E Braising Pans Circa 2003 to Present
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION PARTS LIST DOMESTIC This manual provides s for: Eclipse Ergonomic Tilting Braising Pans MODELS: BPM-30E, BPM-40E BPP-30E, BPP-40E Braising
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B
Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter
Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
First In Fasteners H. Paulin & Co., a division of The Hillman Group Canada ULC
First In Fasteners Since 1920, Papco has been manufacturing and merchandising quality automotive fasteners for original equipment and the aftermarket. Today there are over 12,000 items in the Papco line