Aegis Standard Report Template Examples

Size: px
Start display at page:

Download "Aegis Standard Report Template Examples"

Transcription

1 Aegis Standard Report Template Examples

2 Contents Introduction... 3 Quality and Test Reports... 4 NPI Reports Production & WIP Tracking Reports System Administration Reports Material and Traceability Production Machines... 28

3 Introduction This document illustrates report and chart examples that are available from Aegis standard report templates. The templates are available for new and existing customers, as they may be directly imported into the Data Miner. Each section includes a summary of the report content and its related data source(s). It also identifies runtime parameters, which is data criteria the end-user supplies to narrow down the data return and focus of the report or chart.

4 Aegis Standard Report Examples Quality and Test Reports First Pass Yield by Job This report details the first pass yield at each operation for a given job/work order, and is grouped by customer, assembly, and job. Yield Job(s)

5 First Pass Yield by Job with Defects This report details the first pass yield at each operation, and is grouped by job/work order and operation. Joined Quality & Yield Job(s) Defect Drill Down Report This Pareto chart returns the defect quantity for a specific time period grouped by defect code with the ability to drill down to the following levels in this order: assembly number, individual serial number, reference designator, and pin number. Quality Time

6 Operator Defect Report by Time This report returns the total number of defects an operator has logged for a given time period and is grouped by job/work order. Quality Job(s) DPMO 7912 Report by Job This report returns the calculated DPMO per IPC 7912 (end-unit DPMO, and based only on completed units) for a given time period and is grouped by customer and assembly number. DPMO (IPC-7912) Time

7 In-Process DPMO by Time This report details the in-process DPMO value for each operation for a given time period and is grouped by job/work order. DPMO (In-Process) Time

8 Time Based Defect Report by Assembly This report returns a Pareto chart with defects grouped by inspection codes on page 1, and details the defect data on subsequent pages grouped by assembly for a given time period. Quality Time

9 Top 5 Defects by Cost This chart details the cost of quality for the top 5 inspection codes. A currency value may be related to each inspection code in order to yield these results. Quality None Top 5 Defects by Station Chart This chart details the top 5 inspection codes logged at a given operation point for a given time. Quality Operation and Time

10 Daily Yield this Month Chart This two-pane chart details first pass yield percentage in the top pane and the unit count in the bottom pane for each day of the current month. Yield None Technicians Log Report This report returns the defect counts grouped by defect code for a given symptom to identify the most common defects for a given failure. Quality Assembly and Symptom (failure code).

11 Measured Value Report This report returns the measured data for a given serial number, operation point and measured data type and is grouped by serial number. Test and Measurement Serial Number, Operation and Measurement Name (test name). Station Defect Report by Time This report details the total defects by defect status for a given time and is grouped by operation point. Quality Time

12 Time Based Defect Report by Job This report returns a Pareto chart with defects grouped by defect codes on page 1 and then details the defect data on subsequent pages grouped by defect code for a given job/work order. Quality Job(s)/Work Order(s)

13 NPI Reports BOM Report by Assembly and Revision This report returns the BOM line items for an assembly revision, listing the part number, description, quantity, and consolidated reference designators. CAD-BOM Assembly and Assembly (BOM) Revision

14 Bill of Materials by Side This report returns the BOM line items for an assembly process revision, listing the part number, flattened reference designators, and description, and is grouped by assembly side. CAD-BOM Assembly (BOM) Revision and Process Revision

15 CAD Report by Process Revision This report returns each reference location with part number, description, component package, polarity, x, y, rotation, assembly side, and operation points. CAD-BOM Assembly (BOM) Revision and Process Revision Factory Routing This report details the factory operation points in ascending sequence and lists the assembly side performed at that operation, if the data is filtered from another operation point, and the name of the line. Factory Model (product route/traveler) Factory Model(s)

16 Revision Signoff Status This report details assembly (BOM) revisions, process revisions, and production ready assemblies that are ready for review and sign off and the user assigned to the signoff, and is grouped by assembly and signoff type. Revision Sign-Off None Part Relationship by Internal Part Number This report returns the customer part number, vendor part number, and manufacturer part number as they relate to the internal part number. Part Relationships Part Number (Internal)

17 Deviation Report This report returns the deviation name, date created, description, effective date, expiration date, and originator, and is grouped by deviation type and job/work order. Deviations Deviation Type (Any, Job, Process Revision, Part Number, Unit Serial Number, or Operation)

18 Production & WIP Tracking Reports Job Status Report This report returns the details of all the jobs/work orders with their current status, and is grouped by customer and assembly. Job Status Time Routing Certificate of Conformance This report returns the product route history of a serial number through the operation points where WIP transactions were performed, and is grouped by serial number. WIP Serial Number(s)

19 Operator Activity Detail Report This report details all serial numbers processed by each operator, and is grouped by job/work order and operator. WIP Job(s)/Work Order(s) Ready to Ship Report by Job This report returns the quantity of assemblies that have successfully passed their last operation tracking point and is grouped by customer. Ready to Ship Job(s)/Work Order(s)

20 Sub-Assembly Relationships (Genealogy) This report details the sub-assembly relationship with each sub-assembly name/number, revision, and serial number, and is grouped by job/work order. WIP Job(s)/Work Order(s) WIP Report by Serial Number This report details the completion status of a serial number through each operation point. WIP Serial Number(s)

21 Time Delta Report and Chart by Job This report returns a report and separate chart (below) that details the difference between the estimated processing time and the actual time at an operation point for a given job/work order. WIP Job(s)/Work Order(s)

22 WIP Report by Job This report details the date/time and last operation point for each serial number in a given job/work order. Active WIP Job(s)/Work Order(s) Completed Routing Steps by SN This report details which operations a given serial number has completed, listing the operator, time started, and time completed. WIP Job(s)/Work Order(s)

23 System Administration Reports Operator Audit Log This report details scanning errors that a user encountered while performing actions in the material verification system and is displayed with one user per page. Audit Log Time Rights Report by User This report details user information and what roles and rights have been enabled for them. User Detail User(s)

24 Rights Report by User and Group This report details user information and what roles and rights have been enabled for them, including any group roles and rights that supplement their privileges. User Detail and User Group Detail User(s) and Group(s)

25 Material and Traceability Kitting Shortage Report This report returns a kit shortage quantity by comparing the material required and the available material in inventory for a given job/work order. Kit Requirements and Kit Material Kitted Materials Report Job(s)/Work Order(s) This report details the materials that has been kitted to a given job. Kitted Material Job(s)/Work Order(s)

26 Installed Components Recall Report This report lists all the serial numbers that contain a given part and its lot number. Installed Component Record Lot Number Tooling Service Life Report This report details the total, used, and remaining service life for a given tool, grouped by tool type. Tooling Inventory Report Item Types

27 Traceability by Serial Number Report This report returns the customer name, assembly number, assembly revision, installed internal part numbers, related manufacturer part numbers to each internal part number, lot codes of the manufacture part numbers, operator, and operation point where the material was installed for a given serial number. Installed Component Record Unit Serial Number

28 Production Machines Machine Utilization This report details the amount of time (in seconds) that a machine or operation existed in a given state/condition for a specified time period. Utilization Time Wave Solder History This report lists the conditions for a wave solder machine for each serial number processed for a given assembly and job/work order. Wave Solder Assembly and Job/Work Order

SUPPLIER Form #: 007 AUDIT QUESTIONNAIRE

SUPPLIER Form #: 007 AUDIT QUESTIONNAIRE 1.0 BACKGROUND INFORMATION Company Name: Company Address: Phone Number: Fax Number: Number of years in business: Number of employees: Annual Sales in Dollars: Size of Facility in Square Feet: Name of Senior

More information

Understanding Manufacturing Execution Systems (MES)

Understanding Manufacturing Execution Systems (MES) Understanding Manufacturing Execution Systems (MES) Presented by: Shirley Schmidt Freedom Technologies 10370 Citation Dr., Suite 200 Brighton, MI 48116 Phone: 810-227-3737 www.freedomcorp.com What is a

More information

BEDIFFERENT A C E 2 0 1 2 I N T E R N A T I O N A L

BEDIFFERENT A C E 2 0 1 2 I N T E R N A T I O N A L BEDIFFERENT A C E 2 0 1 2 I N T E R N A T I O N A L ACE 2012 I N TERNATIONAL Innovative Manufacturing Applications Nathan Brown Director, Product Management Aras www. Core Services Forms Workflow Configurations

More information

RTP s NUCLEAR QUALITY ASSURANCE PROGRAM

RTP s NUCLEAR QUALITY ASSURANCE PROGRAM RTP s NUCLEAR QUALITY ASSURANCE PROGRAM RTP operates under one quality program, whether you purchase products that are commercial grade, nuclear safety-related or industrial safety compliant (IEC 61508).

More information

Generic CMMS Quality Assurance Plan

Generic CMMS Quality Assurance Plan Generic CMMS Quality Assurance Plan Scope In accordance with the Quality Policy, the Quality System of CMMS is based upon the requirements and structure of ISO (the International Organization for Standardization)

More information

Factory Modeling. The Priority Enterprise Management System. Contents

Factory Modeling. The Priority Enterprise Management System. Contents The Priority Enterprise Management System Factory Modeling Contents Introduction...2 Parts...3 Bills of Materials and Revisions...3 Engineering Change Orders (ECO)...4 Part Routings...4 Operations...4

More information

Sage 200 Manufacturing Datasheet

Sage 200 Manufacturing Datasheet Sage 200 Manufacturing Datasheet Sage 200 Manufacturing is a powerful manufacturing solution that enables you to manage your entire supply chain in detail, end to end, giving you the information needed

More information

MEDFORD FABRICATION CSC, INC. Quality System Manual. Date of issue: 03/25/2010 Revision : F

MEDFORD FABRICATION CSC, INC. Quality System Manual. Date of issue: 03/25/2010 Revision : F MEDFORD FABRICATION CSC, INC Quality System Manual Date of issue: 03/25/2010 Revision : F Table of Contents System Description 1.0 Introduction 2.0 Company Quality Policy 3.0 Organization Charts 4.0 Quality

More information

for Sage 100 ERP Work Order Overview Document

for Sage 100 ERP Work Order Overview Document for Sage 100 ERP Work Order Document 2012 Sage Software, Inc. All rights reserved. Sage Software, Sage Software logos, and the Sage Software product and service names mentioned herein are registered trademarks

More information

Configuration Management ISO 10007

Configuration Management ISO 10007 Configuration Management ISO 10007 Introduction Configuration Management Overview: What is Configuration Management? Collection of tools, techniques and experience designed to reduce costs and improve

More information

Basic Factory Dynamics

Basic Factory Dynamics Basic Factory Dynamics Physics should be explained as simply as possible, but no simpler. Albert Einstein 1 HAL Case Large Panel Line: produces unpopulated printed circuit boards Line runs 24 hr/day Recent

More information

UNCONTROLLED COPY FOR REFERENCE ONLY

UNCONTROLLED COPY FOR REFERENCE ONLY CLOVER MACHINE AND MFG. 800 MATHEW ST. #101 SANTA CLARA, CA 95050 727-3380 727-7015 fax REVISION: DATE: PAGE 1 OF 45 QUALITY POLICY MANUAL DISTRIBUTION LIST: President Purchasing Manager Vice President

More information

The transition to a complete paperless system for operations process management will yield the following immediate benefits:

The transition to a complete paperless system for operations process management will yield the following immediate benefits: Solumina is designed for companies that manufacture or service complex products with multiple levels of sub-assemblies, and that are subject to frequent engineering changes. PROCESS PLANNING MANUFACTURING

More information

Traceability: A Benefit Not a Burden

Traceability: A Benefit Not a Burden Traceability: A Benefit Not a Burden Four reasons to approach traceability as a natural benefit of Big Data in manufacturing. By Jason Spera, CEO Aegis Software Speed, Control and Visibility for Manufacturing

More information

Wonderware MES/Operations Managing the transformation of materials into finished products in real time

Wonderware MES/Operations Managing the transformation of materials into finished products in real time Wonderware MES/Operations Managing the transformation of materials into finished products in real time Wonderware offers a complete set of MES software functionality to digitize your industrial operations

More information

Manufacturing Operations Software. Speed, Control and Visibility for Manufacturing Operations

Manufacturing Operations Software. Speed, Control and Visibility for Manufacturing Operations Manufacturing Operations Software Speed, Control and Visibility for Manufacturing Operations Make Information Work as Hard as You Do Real-time imonitor dashboards configured by the customer to provide

More information

NORTH AMERICA OPERATIONS. (Fairmont and Montreal Facilities) QUALITY MANUAL. Prepared to comply with the requirements of ISO 9001:2008

NORTH AMERICA OPERATIONS. (Fairmont and Montreal Facilities) QUALITY MANUAL. Prepared to comply with the requirements of ISO 9001:2008 WEIGH-TRONIX CANADA ULC NORTH AMERICA OPERATIONS (Fairmont and Montreal Facilities) QUALITY MANUAL Prepared to comply with the requirements of ISO 9001:2008 Meets or exceeds the requirements for design,

More information

NETWORK BUSINESS SYSTEMS SOFTWARE SYSTEM DOCUMENTATION MANUFACTURING SYSTEM FEATURES

NETWORK BUSINESS SYSTEMS SOFTWARE SYSTEM DOCUMENTATION MANUFACTURING SYSTEM FEATURES NETWORK BUSINESS SYSTEMS SOFTWARE SYSTEM DOCUMENTATION MANUFACTURING SYSTEM FEATURES WORK ORDERS Standard Mfg. vs. Full Mfg./MRP Manufacturing Target date, open date, closed date You can make and buy the

More information

RMA Procedure. 2.0 SCOPE This covers all material returned to your company s manufacturing facility.

RMA Procedure. 2.0 SCOPE This covers all material returned to your company s manufacturing facility. RMA Procedure Document Number: OP-00027 Revision History: Rev. Description Author Eff. Date Eng. Fin. Mfg. Mktg. Sales QA 1 Release. 07/18/95 N/A N.B. B.W. E.K. E.K. G.T. 2 Update QA027 (RMA) Form 12/15/95

More information

MANUFACTURING EXECUTION SYSTEMS VS. ERP/MRP

MANUFACTURING EXECUTION SYSTEMS VS. ERP/MRP www.globalsmt.net %*(*5 "- &% *5*0/ The Global Assembly Journal for SMT and Advanced Packaging Professionals Volume 11 Number 9 September 2011 ISSN 1474-0893 MANUFACTURING EXECUTION SYSTEMS VS. ERP/MRP

More information

Inventory Costing Repair and Restoration

Inventory Costing Repair and Restoration White Paper Dynamics NAV / Navision Inventory Costing Repair and Restoration Now you can use NAV for Inventory Costing as it was meant to be used Download this White Paper on the web at http://www.dynamicswest.com/navisioncostrepair.html

More information

Quality Assurance Provisions

Quality Assurance Provisions Page 1 of 5 1. Purpose and Scope. The purpose of this document is to define the Quality Assurance Provisions FLIR Systems Inc. requires for inventory material received from Suppliers. This document applies

More information

Karas Engineering AS9100 QUALITY MANAGEMENT SYSTEM MANUAL

Karas Engineering AS9100 QUALITY MANAGEMENT SYSTEM MANUAL Karas Engineering AS9100 QUALITY MANAGEMENT SYSTEM MANUAL Revision D October 27, 2015 Statement of Commitment and Authority Commitment This Quality Management System Manual (QMSM) delineates the processes,

More information

GLOBAL AEROSPACE PROCEDURE

GLOBAL AEROSPACE PROCEDURE 1 of 13 1. PURPOSE: This procedure establishes the minimum PPG Aerospace requirements for a Supplier's Quality Plan. These requirements pertain to the documentation and inspection/testing necessary to

More information

How To Improve Your Business Software

How To Improve Your Business Software A first look at the next exciting release of award-winning software from Open Systems, Inc. v 10.5 v 10.5 Information presented here describes the intended features of TRAVERSE version 10.5 as of September,

More information

FLEETMATE. Overview. Work Order Features. CUSTOMER GUIDE: Work Orders

FLEETMATE. Overview. Work Order Features. CUSTOMER GUIDE: Work Orders Overview FLEETMATE will enable you to record all maintenance and/or repair activities performed on a vehicle via a Work Order. Work orders can accommodate any number of individual Labor lines, and any

More information

Computer Integrated Manufacturing software

Computer Integrated Manufacturing software MYCam Computer Integrated Manufacturing software. For off-line programming from CAD and BOM data, plus options to build an enterprise information system. MYCamTM Computer Integrated Manufacturing software

More information

PENTAGON 2000SQL SOFTWARE EMPOWERING THE ENTERPRISE

PENTAGON 2000SQL SOFTWARE EMPOWERING THE ENTERPRISE PENTAGON 2000SQL SOFTWARE EMPOWERING THE ENTERPRISE Total Electronics Software Solutions Powered By PENTAGON 2000SQL : ONE SYSTEM ONE SOLUTION ONE TIME About PENTAGON 2000 Software, Inc. PENTAGON 2000

More information

Operational Business Intelligence in Manufacturing

Operational Business Intelligence in Manufacturing Operational Business Intelligence in Manufacturing Copyright 2007 KeyTone Technologies Inc. Page 1 SmartWIP - Intelligent Manufacturing with RFID Manufacturers are under competitive pressure to fulfill

More information

M.I.S. Electronics Inc. Electronics Manufacturing Services

M.I.S. Electronics Inc. Electronics Manufacturing Services M.I.S. Electronics Inc. Electronics Manufacturing Services Corporate Overview Where everything comes together! Company Profile Established in 1999 Located in Richmond Hill (Toronto) Ontario Full turnkey

More information

MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS

MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS CONTENTS 1. CONTROL PLANS 2. PROCESS APPROACH 3. PERFORMANCE 4. INTERNAL AUDITING 5. CONTROL OF NON-CONFORMING PRODUCT 6.

More information

EAM RFID SOLUTIONS INTERNAL USE CASE A COMPLETE SOLUTION. ENHANCING EFFICIENCY + CUSTOMER SATISFACTION. THE CHALLENGE: PROCESS + PRODUCT THE COMPANY

EAM RFID SOLUTIONS INTERNAL USE CASE A COMPLETE SOLUTION. ENHANCING EFFICIENCY + CUSTOMER SATISFACTION. THE CHALLENGE: PROCESS + PRODUCT THE COMPANY INTERNAL USE CASE EAM RFID SOLUTIONS A COMPLETE SOLUTION. ENHANCING EFFICIENCY + CUSTOMER SATISFACTION. THE COMPANY EAM Worldwide, an OEM of aviation life vests and life rafts, operates a 56,000 square

More information

ERP Areas and Modules / Trading

ERP Areas and Modules / Trading ERP Areas and Modules / Trading These modules reflect the multi national character of the SoftBASE Business Suite. They support multiple languages, currencies, and adapt easily to cultural differences.

More information

ORACLE MANUFACTURING EXECUTION SYSTEM FOR DISCRETE MANUFACTURING

ORACLE MANUFACTURING EXECUTION SYSTEM FOR DISCRETE MANUFACTURING ORACLE MANUFACTURING EXECUTION SYSTEM FOR DISCRETE MANUFACTURING KEY FEATURES The Manufacturing Execution System for Discrete Manufacturing is comprised of the MES Workstation for Operators and the MES

More information

Purchase Order Clauses and Conditions

Purchase Order Clauses and Conditions Purchase Order Clauses and Conditions All purchase orders for materials, special processes, machining and fabrication services and end items are subject to the following requirements: General Requirements:

More information

2. Which transaction in the order-to-cash business process creates a financial accounting document?

2. Which transaction in the order-to-cash business process creates a financial accounting document? SAP EDUCATION SAMPLE QUESTIONS: C_TERP10_65 Disclaimer: These sample questions are for self-evaluation purposes only and do not appear on the actual certification exams. Answering the sample questions

More information

Computer Integrated Manufacturing

Computer Integrated Manufacturing Computer Integrated Manufacturing Benefits and Application for the Roll Forming Industry Jaycen Rigger Director of Technical Services AMS Controls Computer Integrated Manufacturing (CIM) CIM integrates

More information

ISO 9001:2015 QUALITY MANAGEMENT SYSTEM ***** ISO 14001:2015 ENVIRONMENTAL MANAGEMENT SYSTEM

ISO 9001:2015 QUALITY MANAGEMENT SYSTEM ***** ISO 14001:2015 ENVIRONMENTAL MANAGEMENT SYSTEM ISO 9001:2015 QUALITY MANAGEMENT SYSTEM ***** ISO 14001:2015 ENVIRONMENTAL MANAGEMENT SYSTEM ***** OHSAS 18001:2007 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM ***** QMS-EMS-OHS MANUAL Your Company

More information

CUSTOMER SPECIFIC REQUIREMENTS

CUSTOMER SPECIFIC REQUIREMENTS CUSTOMER SPECIFIC REQUIREMENTS For Use With ISO 9001:2008 & ISO/TS 16949:2009 Page 1 SYSTEMS POLICY MANUAL CONTENTS Revision History Approval Document Distribution and Control General Application Background

More information

The Thinking Approach LEAN CONCEPTS. 2012-2013, IL Holdings, LLC All rights reserved 1

The Thinking Approach LEAN CONCEPTS. 2012-2013, IL Holdings, LLC All rights reserved 1 The Thinking Approach LEAN CONCEPTS All rights reserved 1 Basic Thinking to Manage the Journey MANAGEMENT TACTICS OF A LEAN TRANSFORMATION All rights reserved 2 LEAN MANAGEMENT Two key questions What is

More information

Event Management System (EMS) Room Scheduling Guide

Event Management System (EMS) Room Scheduling Guide Event Management System (EMS) Room Scheduling Guide Tables of Contents How to Request a reservations using EMS... 1 View My Request... 8 Browse Events... 10 Browse Facilities... 14 Browse Spaces... 16

More information

Traceability Data Integrity: Challenges and Solutions By Mitch DeCaire, Cogiscan, Inc.

Traceability Data Integrity: Challenges and Solutions By Mitch DeCaire, Cogiscan, Inc. Traceability Data Integrity: Challenges and Solutions By Mitch DeCaire, Cogiscan, Inc. The electronics manufacturing industry is experiencing increased demands for material traceability. Competitive pressures

More information

The Two Key Criteria for Successful Six Sigma Project Selection Advantage Series White Paper By Jeff Gotro, Ph.D., CMC

The Two Key Criteria for Successful Six Sigma Project Selection Advantage Series White Paper By Jeff Gotro, Ph.D., CMC The Two Key Criteria for Successful Six Sigma Project Selection Advantage Series White Paper By Jeff Gotro, Ph.D., CMC Introduction Encouraged by the results of Six Sigma deployment at Motorola, AlliedSignal

More information

System Integration. System Integration. Global Manufacturing

System Integration. System Integration. Global Manufacturing System Integration Streamline build cycles and accelerate time-to-market with scalable and controlled manufacturing, assembly and test services Automates control of all manufacturing processes Assures

More information

WW OPS-05 Improve Production Execution Visibility, Agility & Performance with Wonderware MES

WW OPS-05 Improve Production Execution Visibility, Agility & Performance with Wonderware MES Slide 1 WW OPS-05 Improve Production Execution Visibility, Agility & Performance with Wonderware MES social.invensys.com @InvensysOpsMgmt / #SoftwareRevolution Jeff Nuse /InvensysVideos Senior Product

More information

Seradex White Paper. Engineering Change Process. A Discussion of Issues in the Manufacturing OrderStream

Seradex White Paper. Engineering Change Process. A Discussion of Issues in the Manufacturing OrderStream Seradex White Paper A Discussion of Issues in the Manufacturing OrderStream Engineering Change Process Every manufacturing organization makes product design changes. In advanced technological industries

More information

Basics FLEETMATE. Getting Started The Main Window Filtering Data Using Your Mouse Windows and Buttons

Basics FLEETMATE. Getting Started The Main Window Filtering Data Using Your Mouse Windows and Buttons Basics Getting Started The Main Window Filtering Data Using Your Mouse Windows and Buttons Copyright SCB Consulting, LLC. All rights reserved. www.fleetmate.com Getting Started Welcome to FLEETMATE, Windows

More information

ADVANCES IN AUTOMATIC OPTICAL INSPECTION: GRAY SCALE CORRELATION vs. VECTORAL IMAGING

ADVANCES IN AUTOMATIC OPTICAL INSPECTION: GRAY SCALE CORRELATION vs. VECTORAL IMAGING ADVANCES IN AUTOMATIC OPTICAL INSPECTION: GRAY SCALE CORRELATION vs. VECTORAL IMAGING Vectoral Imaging, SPC & Closed Loop Communication: The Zero Defect SMD Assembly Line Mark J. Norris Vision Inspection

More information

543.7 What are the minimum internal control standards for bingo?

543.7 What are the minimum internal control standards for bingo? Bingo Purpose This section provides guidance on the development of internal controls, policies, and procedures for the operation of bingo. It has been compiled by tribal regulators, Class II gaming operators,

More information

Manufacturing Applications in Microsoft Dynamics GP 10.0

Manufacturing Applications in Microsoft Dynamics GP 10.0 Manufacturing Applications in Microsoft Dynamics GP 10.0 8817: Manufacturing Applications in Microsoft Dynamics GP 10.0 (4 Days) About this Course This four-day instructor-led course provides students

More information

INSPECTION IN-PROCESS AND FINAL QUALITY ASSURANCE

INSPECTION IN-PROCESS AND FINAL QUALITY ASSURANCE INSPECTION IN-PROCESS AND FINAL QUALITY ASSURANCE 1.0 SCOPE: The purpose of this procedure is to document mandatory to ensure compliance to Project Requirements. inspection points and 2.0 REFERENCE DOCUMENTS:

More information

The Fulfillment of AS 9100 Rev C Requirements by EnterpriseIQ

The Fulfillment of AS 9100 Rev C Requirements by EnterpriseIQ The Fulfillment of AS 9100 Rev C Requirements by EnterpriseIQ Manufacturers have worked to meet the stringent requirements of AS9100 for decades; the recent introduction of Revision C has further expanded

More information

PPG SUPPLIER DEVELOPMENT ASSESSMENT

PPG SUPPLIER DEVELOPMENT ASSESSMENT Supplier: Address: Products: Assessment Date: Assessment Team: Certification: Supplier Contacts Position E-mail Phone General Comments: Assessment Results Summary Sections Non-conformity Action Point Quality

More information

Dynamics GP Insights to Manufacturing

Dynamics GP Insights to Manufacturing Dynamics GP Insights to Manufacturing Dynamics GP includes powerful distribution functionality that will help you more easily and effectively manage your distribution operations. This book covers some

More information

ISLAND AVIATIONS SERVICES LTD MALE REQUEST FOR PROPOSALS ENGINEERING MANAGEMENT SOFTWARE

ISLAND AVIATIONS SERVICES LTD MALE REQUEST FOR PROPOSALS ENGINEERING MANAGEMENT SOFTWARE ISLAND AVIATIONS SERVICES LTD MALE REQUEST FOR PROPOSALS ENGINEERING MANAGEMENT SOFTWARE 01 May 2015 Prepared by IASL Procurement Committee 1 RFP ENGINEERING MANAGEMENT SOFTWARE Island Aviation Services

More information

Quality Management System. Manual

Quality Management System. Manual Quality Manual ISO 9001 Quality Approved by: JTH Page 1 of 7 Introduction The adoption of a Quality is a strategic decision of an organization. Industrial Scale Ltd. has instituted a formal Quality as

More information

WHITE PAPER. What is MES (Manufacturing Execution System) in Complex Discrete Manufacturing?

WHITE PAPER. What is MES (Manufacturing Execution System) in Complex Discrete Manufacturing? WHITE PAPER What is MES (Manufacturing Execution System) in Complex Discrete Manufacturing? Contents Foreword... 4 1. Defining MES and Complex Discrete Manufacturing... 5 1.1. What is unique about Complex

More information

SIPOC -- Practical Use Use & Construction Tips Doug Stohr Lean Six Sigma Black Belt -- - MINCO 1/14/2010 1

SIPOC -- Practical Use Use & Construction Tips Doug Stohr Lean Six Sigma Black Belt -- - MINCO 1/14/2010 1 SIPOC - Practical Use & Construction Tips Doug Stohr Lean Six Sigma Black Belt -- MINCO 1/14/2010 1 Presentation Topics SIPOC Breakdown Construction and Tips Ranking Options SIPOC uses and Purpose SIPOC

More information

Dynamics GP Insights to Distribution: Sales Orders

Dynamics GP Insights to Distribution: Sales Orders Dynamics GP Insights to Distribution: Sales Orders Dynamics GP includes powerful distribution functionality that will help you more easily and effectively manage your distribution operations. This book

More information

Retail POS User s Guide. Microsoft Dynamics AX for Retail

Retail POS User s Guide. Microsoft Dynamics AX for Retail Retail POS User s Guide Microsoft Dynamics AX for Retail January 2011 Microsoft Dynamics is a line of integrated, adaptable business management solutions that enables you and your people to make business

More information

www.itilhelp.com ISO 9000 Quality Standard Background Information Quality Systems Implementation

www.itilhelp.com ISO 9000 Quality Standard Background Information Quality Systems Implementation ISO 9000 Quality Standard Background Information www.itilhelp.com There is a worldwide trend towards more stringent customer expectations with regard to quality. Accompanying this trend has been a growing

More information

Self-Audit Checklist

Self-Audit Checklist Page 1 Company Name: Date of audit: Date of last audit performed: Name of person performing self-audit: Signature: Name of person responsible for quality system: Signature: Number of non-compliances: Page

More information

Process design. Process design. Process design. Operations strategy. Supply network design. Layout and flow Design. Operations management.

Process design. Process design. Process design. Operations strategy. Supply network design. Layout and flow Design. Operations management. Process design Source: Joe Schwarz, www.joyrides.com Process design Process design Supply network design Operations strategy Layout and flow Design Operations management Improvement Process technology

More information

DRAWING NUMBER REVISION TITLE PAGE 90-2000-7.1 C Planning of Product Realization 1 of 5

DRAWING NUMBER REVISION TITLE PAGE 90-2000-7.1 C Planning of Product Realization 1 of 5 90-2000-7.1 C Planning of Product Realization 1 of 5 WRITTEN BY: DATE: APPROVED BY: DATE: J. Caruso J. Porter PRODUCT RESOURCES NEWBURYPORT, MA USA NOTICE: THIS DOCUMENT IS PROPRIETARY AND ITS CONTENTS

More information

USA CANADA INDIA. R12.x Oracle E-Business Suite Essentials for Implementers

USA CANADA INDIA. R12.x Oracle E-Business Suite Essentials for Implementers USA CANADA INDIA Modules in Oracle Manufacturing R12.x Oracle E-Business Suite Essentials for Implementers R12.1 Oracle E-Business Essentials for Implementers: Overview Objectives Course purpose More help

More information

UXC Eclipse + Microsoft Dynamics NAV for Life Sciences

UXC Eclipse + Microsoft Dynamics NAV for Life Sciences UXC Eclipse + Microsoft Dynamics NAV for Life Sciences The foundation of the UXC Eclipse Life Science Solution is Microsoft Dynamics NAV, delivering with the industry expertise of UXC Eclipse and rigorous

More information

LinkTech LLC 3000 Bunsen Ave. #A Ventura, CA 93003

LinkTech LLC 3000 Bunsen Ave. #A Ventura, CA 93003 D LT-422-001 Page 1 of 12 QUALITY MANUAL LinkTech LLC 3000 Bunsen Ave. #A Ventura, CA 93003 Based on ISO 9001:2008 D LT-422-001 Page 2 of 12 INTRODUCTION: This Quality Manual establishes the quality system

More information

New Program Quality Requirements for Suppliers (NPQR) For Limited Manufacturing of Components and/or Processes for Engineering Certification

New Program Quality Requirements for Suppliers (NPQR) For Limited Manufacturing of Components and/or Processes for Engineering Certification New Program Quality Requirements for Suppliers (NPQR) For Limited Manufacturing of Components and/or Processes for Engineering Certification Revision A New Program Quality Requirements for Suppliers Rev.

More information

QUALITY MANUAL REVISION RECORD

QUALITY MANUAL REVISION RECORD Page 2 of 31 REVISION RECORD Date Rev Description Jun 18, 2007 N/C Original Issue Sep 16, 2009 A Update to ISO 9001:2008 Standard. Feb 04, 2010 B Revised exclusions, removed (Except 7.3.7 from the exclusion

More information

QUALITY ASSURANCE MANUAL JPM OF MISSISSIPPI, INC.

QUALITY ASSURANCE MANUAL JPM OF MISSISSIPPI, INC. QUALITY ASSURANCE MANUAL JPM OF MISSISSIPPI, INC. Hattiesburg, MS Revision E 01/19/11 Revised to ISO 9001:2008 on July 9, 2009 JPM OF MISSISSIPPI, INC. MANAGEMENT QUALITY POLICY It is the goal of JPM of

More information

Implement Inventory Like a Pro #SNH16

Implement Inventory Like a Pro #SNH16 #SNH16 Implement Inventory Like a Pro #SNH16 Attending this Breakout session for the full 100 minutes entitles you to 2 hours of CPE. Please be sure you check in to the session using the mobile app or,

More information

The Most Powerful Tool In Your Belt

The Most Powerful Tool In Your Belt The Most Powerful Tool In Your Belt M a i n t e n a n c e C o n n e c t i o n 1 4 7 7 D r e w A v e, S u i t e 1 0 3 D a v i s, C A 9 5 6 1 6 P h o n e : ( 8 8 8 ) 567-3434 F a x : ( 7 7 5 ) 2 5 5-6 3

More information

A and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058

A and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058 A and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058 "When Quality Counts, Choose A&M Electronics" SMT, BGA, & Through

More information

Supplier Quality Requirements

Supplier Quality Requirements Key Elements Procedures # 2 Supplier Quality Requirements Section List of content Page 1.0 Foreword 2 2.0 Definitions and acronyms 2 3.0 Basic Quality Requirements 3 4.0 Part Specific Quality Requirements

More information

This procedure applies to all aspects of Specialized Turning, Inc. s Aerospace Quality Management System.

This procedure applies to all aspects of Specialized Turning, Inc. s Aerospace Quality Management System. P 4.0 Page 1 Document Number and Title: P 4.0 QUALITY MANAGEMENT SYSTEM AND DOCUMENTATION REQUIREMENTS Originator: MANAGEMENT REPRESENTATIVE Revision: 8 1. Scope and Purpose: This procedure applies to

More information

Jet Enterprise Cubes. Microsoft Dynamics NAV. Version 3.0

Jet Enterprise Cubes. Microsoft Dynamics NAV. Version 3.0 Jet Enterprise Cubes Microsoft Dynamics NAV Version 3.0 Table of Contents Table of Contents... 2 Introduction... 4 Overview of Jet Enterprise Cubes... 4 Terminology... 5 OLAP Cube... 5 Measure... 5 Dimension...

More information

Introducing the New FaciliWorks 8i

Introducing the New FaciliWorks 8i Introducing the New FaciliWorks 8i FaciliWorks 8i Enterprise Asset Management software is the highest quality web-based software product available for the facilities maintenance marketplace. Easy to implement,

More information

Acceptability of Printed Circuit Board Assemblies

Acceptability of Printed Circuit Board Assemblies Section No.: 12I.2.3, Sheet 1 of 9 Rev Level: 16 Additional Distribution: PCB Assembly Subcontractors 1.0 Purpose 2.0 Scope Acceptability of Printed Circuit Board Assemblies 1.1 The purpose of this standard

More information

Comparison ISO/TS 16949 (1999) to VDA 6.1 (1998)

Comparison ISO/TS 16949 (1999) to VDA 6.1 (1998) 1 APPLICABILITY VDA 6.1: Section: 3.1; 7 new: In addition to the applicability for supplier sites for production, services and their subcontractors for: products and production materials, or services like

More information

Documents, Records and Change Control

Documents, Records and Change Control Documents, Records and Change Control Lori S. Lawless Medical Device Specialist Food and Drug Administration Baltimore District Office Lori.Lawless@fda.hhs.gov (410) 779-5442 May 13-14, 2008 Baltimore

More information

www.measurlink.com A-2

www.measurlink.com A-2 Most of Mitutoyo s electronic instruments can output data via optional connecting cables or wireless transmitters & receivers in the form of the Digimatic code. The Digimatic code can also be converted

More information

Engineering Change Control

Engineering Change Control Fujitsu Glovia, Inc. 2250 East Imperial Highway, Suite 200 El Segundo, CA 90245 marketing@glovia.com (800) 713-1450 www.glovia.com www.facebook.com/fujitsuglovia Engineering Change Control Table of Contents

More information

Project Management WalkThrough

Project Management WalkThrough PRACTICE CS Project Management WalkThrough version 2009.x.x TL 21455 10/25/09 Copyright Information Text copyright 2004-2009 by Thomson Reuters/Tax & Accounting. All rights reserved. Video display images

More information

Quality Management System Manual Revision L

Quality Management System Manual Revision L This Page 1 of 35 of the Quality Management System Manual If issued as a controlled copy, the serial number of this copy is Quality Management System Manual Certified to AS9100 Revision C Printed copies

More information

Using the Cost of Poor Quality to Drive Process Improvement

Using the Cost of Poor Quality to Drive Process Improvement Using the Cost of Poor Quality to Drive Process Improvement March, 2006 Presented by: Dan Olivier, Certified Software Solutions, Inc. (dolivier@certifiedsoftware.com) Javad Seyedzadeh, Bayer Healthcare

More information

SIMATIC IT Unicam Test Expert

SIMATIC IT Unicam Test Expert NPI solutions for electronics Test engineering solutions for PCB Assembly: accelerated test and inspection SIMATIC IT Unicam Test Expert Answers for industry. Simatic IT for the electronics industry Simatic

More information

NPI Logistics Production Analytics. Speed, Control and Visibility for Manufacturing Operations

NPI Logistics Production Analytics. Speed, Control and Visibility for Manufacturing Operations NPI Logistics Production Analytics Speed, Control and Visibility for Manufacturing Operations The leading provider of innovative software solutions to improve speed, control and visibility throughout manufacturing

More information

Seven Must Have ERP Features for Food Manufacturers

Seven Must Have ERP Features for Food Manufacturers Seven Must Have ERP Features for Food Manufacturers Plex Online White Paper At a Glance This paper summarizes the seven features a food or beverage processor must have in its ERP software. Benefits of

More information

SuiteBuilder (Customization) Guide September 3, 2013 Version 2013 Release 2

SuiteBuilder (Customization) Guide September 3, 2013 Version 2013 Release 2 (Customization) Guide September 3, 2013 Version 2013 Release 2 Copyright NetSuite, Inc. 2009 2013 All rights reserved. This document is the property of NetSuite, Inc., and may not be reproduced in whole

More information

KOLLMORGEN. Title: Standard Operating Procedure Counterfeit Parts

KOLLMORGEN. Title: Standard Operating Procedure Counterfeit Parts Approved By: Elliott Major Date: 11-19-09 Page 1 of 9 Rev ECO Date Approve Rev ECO Date Approve A R01_13541 07-23-10 DWL B R01_14787 12-15-11 DWL C R01_14910 03-07-12 DWL D R01_14964 04-16-12 DWL 1.0 Purpose

More information

Penn State University (PSU)

Penn State University (PSU) Penn State University (PSU) FAM Inventory Management Training Manual Prepared By Revision History Revision Date: March 18, 2014 Revision Number: 1 Revision # Date Collaborator Description 1.0 March 18,

More information

Inventory Management

Inventory Management [ B E N E F I T S ] Make informed decisions Give your business a superior competitive advantage, with easy-to-use stock analysis tools and flexible reporting capabilities that deliver rich access to detailed,

More information

Chapter 5. Process design

Chapter 5. Process design Chapter 5 Process design Slack et al s model of operations management Direct Product and service design Design Operations Management Deliver Develop Process design Location, layout and flow Key operations

More information

Quality Assurance Manual ISO 9001:2000. Uncontrolled copy

Quality Assurance Manual ISO 9001:2000. Uncontrolled copy ISO 9001:2000 Uncontrolled copy Approved by: Hugue Meloche, Eng. Page 1 of 24 Intellectual Property This document, prepared by Meloche Group Inc. for its company in the Valleyfield region, remains the

More information

pc/mrp RELEASES 8.60 VERSION

pc/mrp RELEASES 8.60 VERSION pc/mrp NEWS pc/mrp RELEASES 8.60 VERSION July 2011 e-mail address: sales@pcmrp.com Internet: www.pcmrp.com Automatic Credit Card Processing pc/mrp Version 8.56 and higher allow credit cards to be processed

More information

Work Order Management. Release 8.7.2

Work Order Management. Release 8.7.2 Work Order Management Release 8.7.2 Legal Notices 2011 Epicor Software Corporation. All rights reserved. Unauthorized reproduction is a violation of applicable laws. Epicor and the Epicor logo are registered

More information

Is a specialized database application used by the manufacturing industry to reduce production costs by controlling tool usage, inventory, rework and

Is a specialized database application used by the manufacturing industry to reduce production costs by controlling tool usage, inventory, rework and Is a specialized database application used by the manufacturing industry to reduce production costs by controlling tool usage, inventory, rework and purchases. Reduces production costs by: Reducing tool

More information

QuickService Software Training. Equipment Tracking

QuickService Software Training. Equipment Tracking QuickService Software Training Equipment Tracking 1) When first purchasing a new piece of equipment, most companies give each piece of equipment an ID number. QuickService uses the Unit ID for that ID.

More information

Quality Manual. DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1

Quality Manual. DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1 Quality Manual Approval Page Document: QA1000 Issue Date: 5/29/1997 Page 1 of 17 Revision Date: 5/20/2013 DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1 This

More information