Stainless Steel Cylinders DIN ISO 6431 and VDMA
|
|
|
- Clare Skinner
- 7 years ago
- Views:
Transcription
1 Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page For coupling cylinders/reed swiches/brackets see table on page For mounting accessories see from page.40.1 For rod accessories see from page On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T New series of stainless steel 316 L cylinders conforming to DIN 6431 and VDMA Round tube and external tie-rods, standard with adjustable cushionings. Scraper ring in polyurethane specially developed for chemical and food industries. The main features of this cylinder are the clean modern design and the attention to details. A particular attention has been given to the manufacture of the end caps; there are no external casting cavities, thus eliminating contamination traps. In order to facilitate the replacement of the piston rod seal the nose has been developed for simple maintenances also on cylinders still mounted on a machine. Options Through rod (page..4) Seals FKM max 10 C (scraper ring only = V1) V Tandem forward movement piston rods coupled together (page..) TA1 Tandem forward movement piston rods independent (page..) TA2 Tandem back to back (page..) TA3 Tandem front to front (page..) TA4 Extended rod (indicate the requested WH dimension in mm. E.g.: WH -100). Without adjustable cushionings Adjustable rear cushioning only Adjustable front cushioning only Special male thread (indicate the requested thread. E.g. : R-M 10x1,). The dimension AM of the special thread will be the same as the standard. The cylinder will be supplied without rod nut. Female thread; for dimensions see page..4 Sigla P WH-... D D1 D2 R-M... F Z With bellows for protection of the rod (in this case the dimension WH will be extended according the stroke of the cylinder) Special on request /S The options can be combined (when this is possible). The suffix of the options are to be added to the model number of the standard product, as shown in the following table. How to order: 63 / 100 AMXPVR-M12x1,2 63 / 100 AMX P V R-M12X1,2 Bore / Stroke Type Option Option Option..1
2 Bores from 32 to 200 mm Technical data Materials (standard types) 1 Tube and tie-rods Stainless steel AISI 316L 2 Heads Stainless steel AISI 316L 3 Rod Stainless steel AISI 316L, lapped 4 Piston Die-cast aluminium Bushing Self-lubricating sintered bronze 6 Guide ring Natural Delrin 7 Rod seals Special polyurethane 8 Disassembling nose Stainless steel AISI 316L 9 Group cushioning screw Stainless steel AISI 316L Other seals Nitrile rubber NBR/polyurethane Technical data Bore (mm) Fluid Pressure range Compressed filtered air with or without lubrication 0, 10 bar Temperature range -20 C +80 C Stroke from 10 mm to 200 mm Cushion lenght Ports 1/8 1/4 3/8 1/2 3/4 Rod thread M10 x 1,2 M12 x 1,2 M16 x 1, M20 x 1, M27 x 2 M36 x 2 Weight Stroke zero Additional 10 mm stroke..2
3 Bores from 32 to 200 mm Standard dimensions type: AMX Ø AM B BG E EE J2 J3 KK L1 L2 (mm) Ø d G 1/8 6,, M10x1, G 1/4 8 6 M12x1, G 1/4 9, 7, M16x1, G 3/8 11, 8, M16x1, G 3/8 10, 9, M20x1, G 1/ M20x1, G 1/ M27x G 3/4 1 1 M36x G 3/4 1 1 M36x Ø L7 MM PL RT TG VA VD WH ZJ (mm) Ø f M6 32, M M8 46, M8 6, , 2 20, M M M M M
4 Bores from 32 to 200 mm Options type:...p type:...f Ø AF KF T4 WF GF ZJ ZM mm M6 2, M8 3, M10 4, M10 4, M12 6, M12 6, M M M
5 Bores from 32 to 200 mm Options type:...ta1 type:...ta2 type:...ta3 type:...ta4 Ø AM B C D L8 WH mm
6 Bores from 32 to 200 mm Mounting accessories ISO VDMA Rear clevis/eye Flange Feet Centre trunnion Rear standard hinge Rear 90 hinge For dimensions and codes of the accessories: see page.40.1 Ø A AH B C D SA W XA XD XV XV ZF mm max min max , 163, / / / / ,
7 Mounting Accessories for Stainless Steel Cylinders Mountings for DIN ISO 6431 and VDMA Standard executions Version Sym. Type Rear clevis Rear eye Rear 90 hinge CETOP RP 107P Pin with rear clevis MP2 with seeger Narrow rear clevis Narrow rear eye with bearing DIN 648K Rear 90 hinge with bearing DIN 648K Anti-rotating pin for narrow rear clevis Flange VDMA Low foot Round adjustable centre trunnion (tie rod) CFX..AQIS CMX..AQIS ASVX..AQIS SECX..AQIS CFSX..AQIS CMSX..AQIS ASSX..AQIS SECX..ARAQIS FLVX..AQIS PBX..AQIS CTX..AQIS STAINLESS STEEL Technical data Material Stainless steel AISI 316 Note: The mounting screws are to be ordered separately. (see page.3.1). For the accessories of bore mm, apply for availability because they have to be produced on request only. type: CFX type: CMX type: ASVX Rear clevis MP2 Rear eye MP4 OUTLINE OF THE MOUNTING ACCESSORY SHOWN FROM ABOVE Rear 90 hinge CETOP RP 107P Code Item For cyl. A L D R N B S F Z G M CM T Weight CFX32AQIS 32 32, 4 6,6 11, CFX40AQIS ,6 11, CFX0AQIS 0 46, , CFX63AQIS 63 6, , CFX80AQIS CFX100AQIS CFX12AQIS , CFX160AQIS CFX200AQIS The pin is to be ordered separately: for the pin see page.40.2 (SECX..AQIS) Code Item For cyl. A L D R N G S F C M T B Weight CMX32AQIS 32 32, 4 6,6 11, CMX40AQIS ,6 11, CMX0AQIS 0 46, , CMX63AQIS 63 6, , CMX80AQIS CMX100AQIS CMX12AQIS , CMX160AQIS CMX200AQIS Code Item For cyl. Q M BG BH BI BL BM BN BO BS BR BQ G T S Weight ASVX32AQIS 32 6, , ASVX40AQIS 40 6, , ASVX0AQS , ASVX63AQIS , ASVX80AQIS , ASVX100AQIS , ASVX12AQIS ,2 - -0,2-0,6-0, -1,2.40.1
8 Mounting Accessories for Stainless Steel Cylinders Mountings for DIN ISO 6431 and VDMA type: SECX Pin for rear clevis MP2 It is supplied with 2 seegers included. Code Item For cyl. G BT CG CH BU Weight SECX32AQIS ,6 1, SECX40AQIS , 1, SECX0AQIS , 1, SECX63AQIS ,2 1, SECX80AQIS ,2 1, SECX100AQIS , SECX12AQIS ,9 1, SECX160AQIS , 28,6 1, SECX200AQIS , 28,6 1,6 178 type: CFSX Code Item For cyl. L T CM A Z H B DS S G D1 D2 TA TZ LI Weight CFSX32AQIS , 22 10, , ,3 11, CFSX40AQIS , , , CFSX0AQIS , , , CFSX63AQIS , , , CFSX80AQIS ,3 16 Narrow rear clevis for rear male trunnion with bearing DIN 648 K CFSX100AQIS , CFSX12AQIS , ,3 24 Perno da ordinare separatamente: per perno vedi pag (SECX..ARAQIS) type: CMSX Code Item For cyl. A B C D EN ER F G E L M N P H R Weight CMSX32AQIS 32 32, 10, ,6 4 10,, CMSX40AQIS ,6 11, CMSX0AQIS 0 46, , CMSX63AQIS 63 6, , CMSX80AQIS Narrow rear eye for rear male trunnion with bearing DIN 648 K CMSX100AQIS CMSX12AQIS , type: ASSX Code Item For cyl. Q M BG BH BI BL BM BN BO EN ER BQ D H S F Weight ASSX32AQIS 32 6, , 10 8, ASSX40AQIS 40 6, , ASSX0AQS , ASSX63AQIS , ASSX80AQIS , 20 3 Rear 90 hinge with bearing DIN 648 K 0408 ASSX100AQIS , ASSX12AQIS 12 13,
9 Mounting Accessories for Stainless Steel Cylinders Mountings for DIN ISO 6431 and VDMA type: SECX - AR Code Item For cyl. A C D E F G H L B Weight SECX32ARAQIS , 1,1 10 9, , SECX40ARAQIS , , SECX0ARAQIS ,1 16 1, SECX63ARAQIS , Anti-rotating pin for narrow rear clevis It is supplied with 1 seeger included SECX80ARAQIS , SECX100ARAQIS , SECX12ARAQIS , , type: FLVX Flange VDMA MF1 / MF2 Code Item For cyl. A AP AO R AS AR AQ AT AV C D Weight FLVX32AQIS 32 32, , , FLVX40AQIS , FLVX0AQIS 0 46, , FLVX63AQIS 63 6, , FLVX80AQIS FLVX100AQIS FLVX12AQIS , , FLVX160AQIS , FLVX200AQIS , Lowered head screws type VBTRX (see page.3.1) must be used with this mounting accessory. type: PBX Low foot MS1 It is supplied singly. Code Item For cyl. C B D E F G H I S T R U Z Weight PBX32AQIS 32 32, , PBX40AQIS , PBX0AQIS 0 46, , PBX63AQIS 63 6, , , PBX80AQIS , PBX100AQIS , , PBX12AQIS PBX160AQIS , PBX200AQIS , , - 22 type: CTX Code Item For cyl. A AE AL AH AG AF AN R M Q Z Weight Round adjustable centre trunnion (tie rod) MT CTX32AQIS 32 32, ,2 7 M CTX40AQIS , 6,2 8 M CTX0AQIS 0 46, ,6 8,2 8 M CTX63AQIS 63 6, ,6 8,2 12 M CTX80AQIS ,6 10,2 12 M CTX100AQIS ,2 1 M CTX12AQIS ,2 1 M CTX160AQIS , 16,2 18 M CTX200AQIS , 16,2 18 M
10 Mounting Accessories for Stainless Steel Cylinders Clevis ISO 8140 Standard executions Version Symbol Type Female clevis FFXISO STAINLESS STEEL ON REQUEST, AVAILABLE IN STAINLESS STEEL AISI 316 Options Sigla Special versions on request / S Clevis conforming to ISO 8140 standards. They are complete with clips in the standard version (the models M27X2 and M36X2 are normally provided with a pin and 2 seegers). The clevis is mounted on the cylinder rod and allows a swinging movement. Technical data Materials Body and clip: Stainless steel AISI 303 Seeger: Stainless steel AISI 420 type: FFXISO For the accessories of bore mm, apply for availability because they have to be produced on request only. Code Item For cylinder d a a1 b1 b d1 d3 L2 d2 e f L L1 n r Weight FFXISO 8-10 M4x0, , , , FFXISO M6x , , , FFXISO 20 M8x1, , , , FFXISO 2-32 M10x1,2 10 1, 1, , , , FFXISO 40 M12x1, , , , , FFXISO 0-63 M16x1, 16 2,4 1, , FFXISO M20x1, 20 2,9 1, FFXISO 12 M27x FFXISO M36x
11 Mounting Accessories for Stainless Steel Cylinders Bearings - Bearing heads DIN 648-K and ISO 8139 Standard executions Version Symbol Type With female thread RFX..SE STAINLESS STEEL Self-lubricating bearing heads servicing-free and conforming to DIN 648-K and ISO 8139 standards. The bearing head is mounted on the cylinder rod. Technical data Temperature range -30 C +10 C Materials Body: Stainlesssteel Sphere: Stainless steel External ring: type: RFX..SE a Code Item For cylin. d d3 B C1 d1 d2 d4 d dk h1 L3 L4 L L7 W Static a Weig. ISO load (dan) RFX4SE 8-10 M , , RFX6SE M6 9 6,7 8, , RFX8SE 20 8 M , ,0 16 1, RFX10SE M10x1, ,0 12, , , RFX12SE M12x1, , , , , RFX16SE M16x1, , , RFX20SE M20x1, ,3 0 27, , RFX30SE M27x , , RFX3SE M36x , ,
Cylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm
DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL
Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure
ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
TECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES
Pneumatic cylinders mm according to ISO 643 and VDMA 56 with adjustable cushioning UNIVER pneumatic cylinders which comply with ISO 643 and VDMA 56 standards, take advantage of the improvements arising
Piston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
ISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
RM/8000/M, ISO cylinder Magnetic piston, double acting
> > Ø 0... 5 mm > > Magnetic piston as standard > > Conforming to ISO 6 > > Corrosion resistant- With buffer or adjustable cushioning > > Nose mounting nut and piston rod supplied locknut as standard Technical
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
-U- Type to be discontinued
Standard cylinders DNU/DNUL, For new designs use standard cylinders DNC 1 / 1.2-24 Double-acting For contactless position sensing Comprehensive range of accessories 2003/10 Subject to change Products 2004/2005
Standard cylinders DNG/DNGZK/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO 15552 (corresponds
MP/MR Series VDMA 24562 ISO 6431
MP/MR Series VDMA 24562 6431 PNEUMATIC PNEUMATIC MP/MR SERIES VDMA/ POWER General Page numbers General description and application benefits 3 Functional symbols 3 Model code 4 Preferred models - Basic
Port size 32 12 G1/8 RA/8032/* RA/8032/M/* QA/8032/00 100 25 G1/2 RA/8100/* RA/8100/M/* QA/8100/00
Actuators ISO/VDMA Cylinders RA/8000/M Ø 32 to 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
Standard cylinders DSBC, to ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E49003.1 and UNI 10290) Double-acting For contactless
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
Standard cylinders DNC, ISO 15552
Standard cylinders DNC, ISO 15552 -V- New Bellows DADB Standard cylinders DNC, ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO
RA/8000/M, RA/8000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 320 mm
Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 30 mm Comprehensive range for the utmost versatility Conforms to ISO 555 (ISO 643, VDM 456 and NFE 49-003-) High performance,
Hydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X
Hydraulic cylinder Mill type CDL2 type RE 17326 Version: 2013-06 Replaces: 12.12 Series L2 Component series 1X 2 pressure ranges: Nominal pressure 160 bar [16 MPa] Nominal pressure 250 bar [25 MPa] Features
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
CILINDRI ISO 6432 CYLINDERS ISO 6432
AI WOK I microcilindri AIWOK sono realizzati secondo le normative europee DIN/ISO 6432 ed hanno alesaggi compresi tra 8 e 25 mm. Le testate sono fissate alla camicia mediante rullatura. Sono realizzabili
Thermometer in stainless steel with capillary and switch contacts
Design Type Case diameter Thermometer in and switch contacts 7308 = back flange for wall mounting 7312 = front flange for panel mounting 7310 = mounting bracket for wall mounting Dim 100 mm or 160 mm Accuracy
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
FDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
PRA/182000/M; PRA/182000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 125 mm
P/8000/M; P/8000 Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 5 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
Displacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Plunger Cylinder. 1 Description. 2 Technical data
Plunger Cylinder Piston rods ø 50 290 mm, construct to EN 81-2 / EN 81-50 Intended for personnel and freight elevators Series BZG For side-ram or central arrangement Seals with low frictions and war Piston
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
PH Series Product Features 4. Options General Description and Available Versions 5. Technical Force and Consumption Data 6
Index >> Product Features 4 Options General Description and Available Versions 5 Technical Force and Consumption Data 6 Dimensions Main Uni-Check Cylinder 7 Instructions Oil Replenishment 7 Dimensions
SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
CYLINDER SERIES ISO 15552 (EX ISO 6431), Ø 32-63 mm TWO-FLAT
YIR SRIS ISO 2 (X ISO 3), - mm TWO-T This version of cylinder is used to keep the parts fixed to the piston rod at an angle and to apply torques within the specified limits. The piston rod of the Two lat
Control blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
SITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
Universal type. Elbow type AS13 1FG-M5 AS23 1FG-01 AS23 1FG-02 AS33 1FG-02 AS33 1FG-03 AS43 1FG-04. Specifications
Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG RoHS Stainless specifications for use in corrosive environments. Stainless steel used for metal parts.
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
Acceptance Page 2. Revision History 3. Introduction 14. Control Categories 15. Scope 15. General Requirements 15
Acceptance Page 2 Revision History 3 Introduction 14 Control Categories 15 Scope 15 General Requirements 15 Control Category: 0.0 Information Security Management Program 17 Objective Name: 0.01 Information
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
FULL COLOR TAB #3 FM 25
FULL COLOR TAB #3 FM 25 FM - How to Order SERIES FM : Benefits Same construction as TA series with the added benefit of sleeve nut construction. Four tapped holes in Head and Cap-Standard. Optional four
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Pneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
MACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
Linear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
VDL 53 - Vacuum drying oven for flammable solvents
Vacuum drying ovens VDL 53 - Vacuum drying oven for flammable solvents The VDL series ensures maximum safety when drying organic solvents in accordance with TÜV/GS guidelines. The interior chamber is designed
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement
T E M P O S O N I C S L S E R I E S LH 550658 D P r o d u c t S p e c i f i c a t i o n s Temposonics L Series position sensors are available with analog outputs (voltage or current) or digital outputs
Temposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensor Accessories
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensor Accessories Includes Installation, Mounting and Application References Current Production and Retrofit Options for R-Series, G-Series
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
Series CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 262, CETOP RPP. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type Non-Rotating
Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
Richter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
SERVOMECH Linear Actuators
. SERVOMECH Linear actuators SERVOMECH mechanical linear actuators are motorised mechanical cylinders able to transform the rotary motion of a motor into the linear motion of a push rod. They are designed
RODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of
R310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
Vacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without