BARCO. industries inc. Tools Catalog

Transcription

1 BARCO industries inc. Tools Catalog 1

2 TO OUR CUSTOMERS: Barco Industries, Inc., a member of The Phoenix Forge Group, offers you a line of well-respected products. Many of our striking tools are forged in Pennsylvania, then heat treated, finished, and assembled at Barco. This combination of prime manufacturing resources enables Barco to provide you quality, cost competitive striking tools. Barco trowels and masonry tools are fabricated utilizing high volume manufacturing methods. Our manufacturing strengths are reinforced by the strong, positive, dedicated work ethic of our Pennsylvania heritage. Barco and all Phoenix Forge Group employees believe in hard work, quality products, and high levels of service as indicated by our quality statement. The Phoenix Forge Group is committed to meeting customer and industry requirements while continually improving our quality management system. Please review this catalog for our current offerings, and contact our customer service department for prompt service and sales assistance. Thank you. PLEASE SEND ORDERS TO: BARCO INDUSTRIES, INC MACARTHUR ROAD READING, PA Direct Line Fax Phone Toll Free EDI Ordernet Services Web site: Table of Contents Light Duty Hammers... 2 Light Duty Camp Axe... 2 Light Duty Hatchet... 2 Tack Hammers... 2 Sledge Hammers... 3 Engineers Hammers... 3 Drilling Hammers... 4 Blacksmith Hammers... 4 Woodchoppers Mauls... 5 Picks... 5 Post Maul... 5 Wedges... 6 Bars Kelly Perfect Axes... 8 Kelly Woodslasher Axes... 8 Fire Axes... 9 Sport/Camp Axes... 9 Sport Axe Sheath... 9 Hatchets Specialty Hammers Brick Hammers Prospector Picks Tampers Ball Peen Hammers Rocket Hammers Grip Kits BioCurve Wood Handled Hammers Fiberglass Handled Hammers Body and Fender Tools Groover and Edger Knife and Scraper Knoch Styles Installer Trowels Trowel Display Racks Quart Spreader Display Rectangular Trowel Assortment Margin, Pointing, Brick & Plastering Trowels Spreaders Quart Spreaders Replacement Handles A Member of The Phoenix Forge Group BARCO WARRANTY If any BARCO hand tool does not perform under normal usage because of workmanship or imperfection, BARCO Industries, Inc. will replace it free of charge. Simply return to any dealer selling BARCO tools, for replacement. However, wood handles, by their very nature, are subject to wear and breakage though normal use, therefore are not guaranteed against breakage by BARCO.

3 LIGHT DUTY TOOLS Intended for the occasional user and primarily for light duty household jobs, these tools are a good value for the budget conscious homeowner. SAFETY TE: Light duty tools are intended for light use only. They may chip if used improperly for striking surfaces as hard or harder than theirs. Avoid striking other hammers, cold chisels, or masonry nails with these products. Also avoid striking with a glancing blow. Safety goggles should be worn at all times. Value Claw Hammer Curved Claw, Polished Head, Hardwood Handle " 12/72 6/ " 12/48 15/59 Regular Claw Hammer Axe Curved Claw, Black Head, Polished Face and Bevel, Hardwood Handle " 12/72 6/ " 12/48 15/59 Black Head, Polished Edge, Curved Hardwood Handle /4 13 3/4" 6/24 10/42 Hatchet Black Head, Polished Edge and Face, Hardwood Handle /4 13 1/2" 6/24 10/41 TACK HAMMERS Magnetic Black Head, Polished Face and Bevel, Hardwood Handle " 12/96 6/ " 12/48 8/30 2

4 HEAVY TOOLS SLEDGE HAMMERS Sledge hammers are used for heavy jobs where increased force is required. They are typically used for breaking concrete, setting stakes, and driving posts. Polished Face, Fiberglass Handle " " " " " " 2 44 Polished Face, Hickory Handle " " " " " " 2 43 ENGINEERS HAMMERS This double-faced hammer, also called a short handled sledge, is used in close quarters. Polished Face, Fiberglass Handle " " " 4 20 Polished Face, Hickory Handle " " "

5 DRILLING HAMMERS Designed for use with cold chisels, brick chisels, star drills, hardened nails, etc., allowing for heavy blows with limited swing in restricted working areas. Polished Face, Fiberglass Handle " " " 4 19 Polished Face, Hickory Handle " " " 4 18 BLACKSMITH HAMMERS Designed for striking wood or metal. The cross peen is used for shaping and bending metal. Polished Face, Fiberglass Handle " " " 4 20 Polished Face, Hickory Handle " " "

6 WOODCHOPPERS MAULS Woodchoppers Mauls are designed for splitting wood. They have an end for cutting and a sledge end for driving wedges. SAFETY TE: Never strike a maul with another maul or sledge hammer. PICKS Polished Face and Blade, Sledge Eye, Fiberglass Handle " " 4 38 Polished Face and Blade, Sledge Eye, Hickory Handle Picks are used for a variety of digging and earth moving jobs. Railroad/Clay Pick (head only) " " 4 38 No. 6 Eye " " " 6 43 Cutter Mattock (head only) No.6 Eye " 6 32 Pick Mattock (head only) No. 6 Eye POST MAULS Designed for driving wood posts and stakes " 6 32 Painted Cast Grey Iron Head, Hickory Handle " " Head only Head only 4 66 P Handle only

7 WEDGES Wedges are designed to assist in the splitting of wood. They are to be used with a sledge hammer or the sledge end of a woodchoppers maul. FACE DIM /2" sq /8" sq /4" sq /8" sq BARS Wrecking Bars are used for prying apart wood or pulling nails. The Handi-Bar is used for a variety of jobs including the removal of shingles and the pulling of nails. Crow Bars are used primarily for splitting or separating wood, concrete forms or metal. They have two types of points, pinch and wedge. The Digging Bar features a tamper top for better control and force. It is especially useful in the removal of rocks. Wrecking Bar Stripping Bar without claw Stripping Bar with claw / ST OCK POUNDS /2" 3/4 12" 6/ /8" 1 3/4 18" 6/ /4" 3 1/4 24" 6/ /4" 3 3/4 30" 6/ /4" 4 1/4 36" 6/30 * " 12 1/4 48" 1/13 * " 12 1/4 48" 1/13 * " 12 1/4 48" 1/13 Pinch Point Crow Bar / / ST OCK POUNDS * /8" 6 36" 1/6 * /8" 12 51" 1/12 * /4" 18 60" 1/18 * /8" 22 64" 1/22 * /2" 26 66" 1/26 *Surcharge of $3.00 per package for any bars shipping via Ground service. 6

8 Digging Bar / / ST OCK POUNDS * " 16 69" 1/16 Wedge Point Crow Bar / / ST OCK POUNDS * /8" 12 51" 1/12 * /4" 18 60" 1/18 Handi-Bar PRODUCT Baby Pry /2" 12/144 1/ Pocket Pry " 12/144 4/ U " 6/36 9/54 Nail Puller Painted Black, Polished Edge / ST OCK POUNDS /8" 1 10" 5/ /8" /2" 5/ /8" 1 1/4 15" 5/ /4" 2 17" 6/ /8" 2 1/2 18" 6/15 San Angelo Bar Painted Black, Hexagon, Wedge Point and Pick Point / ST OCK POUNDS * " 16 72" 1/16 *Surcharge of $3.00 per package for any bars shipping via Ground service. 7

9 KELLY PERFECT AXES These are the finest quality US made axes available. Each has beveled blades to reduce binding of the head in the wood. The Kelly Perfect features a full polished head with deep bevels and is painted a distinctive blue. Dayton Single Bit 4 1/2" Polished Blade, Blue Bevels / " Curved 2/ " Straight 2/10 Michigan Single Bit 4 3/4" Polished Blade, Blue Bevels / " Curved 2/10 KELLY WOODSLASHER AXES Dayton Single Bit 4 1/2" Red Blade, Polished Edge Flint Edge, Black Blade / " Curved 2/ " Curved 2/11 Michigan Single Bit Michigan Double Bit Western Double Bit 4 3/4" Red Blade, Polished Edge Fiberglass Handle / " Curved 2/ " Curved 2/ " Curved 2/10 4 3/4" Red Blade, Polished Edges / " Straight 2/ " Straight 2/10 4 3/4" Red Blade, Polished Edges / " Straight 2/10 8

10 FIRE AXES Specialty axes designed for the requirements of certain safety situations or environments. The smaller hand axes fit the requirements of public transportation vehicles. The larger pick axes meet the needs of the Marine and Fire Departments. The Pulaski is the preferred axe used by the US Forest Service in combating forest fires. / " Curved 6/19 / " Curved 6/ " Curved 6/44 5" Red Head with Polished Bit, Red Painted Handle / " Curved 2/14 Pulaski 4 1/2" Blade and 3 1/2" Mattock, Black with Polished Edges, Hickory Handle Fiberglass Handle / " Straight 4/25 SPORT/CAMP AXES Sport axes are designed for use in outdoor activities, such as hunting and camping. Each has a head forged of high carbon steel and a cushioned tubular steel or select hickory handle. Hunter s Boys 3 3/8" Red Blade, Polished Edge, Hickory Handle " 4/24 7/45 4" Red Blade, Polished Edge, Hickory Handle / " Curved 2/7 Rocket Belt 3 1/8" Black Blade, Polished Face and Edge Tubular Steel Curved Handle with Rubber Grip, Leather Sheath / /4 13 1/4" 4/24 9/54 9

11 HALF HATCHETS Rocket Half Hatchet Half Hatchet SPECIALTY HATCHETS Broad Hatchet 3 1/2" Blade, Black head with Polished Face and Edge, Tubular Steel Handle / Oval 13" 4/24 8/52 3 1/2" Black Blade, Beveled Nail Slot, Polished Face and Edge, Hickory Handle / Oval 13" 4/24 8/52 4 1/2" Right Hand Bevel, Black Blade, Polished Edge, Hickory Handle / Oval 14 1/2" 4/24 12/74 Lathing/Shingling Hatchet Underhill Box Hatchet Rig Builder Hatchet Wall Board Hatchet Milled Face, 2 1/4" Black Blade, Polished Edge, Hickory Handle with Safety Strap Adjustable Gauge / Oval 12" 4/24 7/ M illed Face, 2 1/4" Polished Edge, Black Blade, Nail Slot, Hickory Handle / Oval 12 1/2" 4/24 6/40 Milled Face, 3 5/8" Black Blade, Polished Face and Edge, Nail Slot, Hickory Handle / Oval 17 1/2" 4/20 9/55 Crowned Milled Face, 1 3/4" Blade with Nail Slot, Black Polished Head, Hickory Handle / Oval 13 1/2" 4/24 6/27 10

12 SPECIALTY HAMMERS Scaling Hammer Popular in foundries and welding shops. Designed for chipping welds, scale, rust, paint, etc. from metal. Black/Polished Head, Hickory Handle / " 6/24 10/40 Mallets / /8" 6/24 5/ /2" 6/24 8/32 BRICK HAMMERS Designed for setting and breaking bricks, masonry tile, concrete blocks, and for chipping mortar from bricks, all BARCO brick hammers have extended necks for proper clearance in tapping bricks while leveling. Rocket brick hammers feature a cushioned steel handle for strength, balance, and reduction in fatigue. Fiberglass handles offer a cushioned grip, which provides increased shock absorption and reduction in fatigue. Commercial/Industrail hammer features a select hickory handle for strength and durability. Rocket Black/Polished Head, Tubular Steel Handle / " 4/16 7/ /4" 4/16 9/36 Fiberglass Black Head, Polished Face and Bevel / " 4/16 9/38 Commercial/Industrial Black head, Polished Face and Bevel / /2" 4/16 7/ /4" 4/16 9/35 11

13 PROSPECTOR'S PICKS Fiberglass Designed for splitting rock, digging, prying out rock with the pick. Black Head, Polished Face and Bevel / " 4/16 9/38 Hickory Black Head, Polished Face and Bevel / " 4/16 8/35 TAMPERS Tampers are used to flatten and smooth dirt, stone, asphalt, and other materials. Tamper with Shaped Handle Black Solid Cast Iron Base, Braced Corners, 44" Shaped Hardwood Handle SIZE CART ON / x 8 Assembled* No 1/ x 10 Assembled* No 1/15 Tamper with Straight Handle Black Solid Cast Iron Base, Braced Corners, 42" Straight Hardwood Handle SIZE CART ON / x 8 Unassembled Yes 1/ x 10 Unassembled Yes 1/ x 8 Assembled* No 1/ x 10 Assembled* No 1/ x 8 Head Only Yes 4/ x 10 Head Only Yes 4/52 Heavy Duty Tamper Black Solid Cast Iron Base, Braced Corners, 48" Shaped Hardwood Handle SIZE CART ON / * Assembled Tampers can ship via common carrier only X 8 Assembled* No 1/ x 10 Assembled* No 1/18 12

14 BALL PEEN HAMMERS These hammers have forged high carbon steel heads and are designed for striking cold chisels in cutting or shipping work and metal forming. The ball shaped peen is used for metal forming. Some models feature a cushioned fiberglass handle, which provides secure grip, added shock absorption, and a reduction in fatigue. Others feature a select hickory handle, the strongest and most durable handle. SAFETY TE: The striking face should be twice the size of the chisel or punch being struck. Fiberglass ANSI Spec. Head, Forged with M achined Face, Peen, and Bevel / /2" 6/36 4/ " 6/48 7/ " 6/36 8/ " 6/36 9/ /2" 6/24 11/ /2" 6/24 14/ " 4/16 10/ " 4/16 13/ " 4/16 17/68 Commercial/Industrial ANSI Spec. head, Forged with Machined Face, Peen, and Bevel, Hickory Handle / /2" 12/72 2/ " 6/36 4/ " 6/36 6/ " 6/36 8/ " 6/36 9/ /2" 6/24 11/ /2" 6/24 14/ " 4/16 15/ " 4/16 19/ " 4/16 17/68 Imported Forged with M achined Face, Peen, and Bevel, Hickory Handle / B " 6/36 4/ B " 6/36 6/ B " 6/36 8/ B " 6/36 9/ B /2" 6/24 11/ B /2" 6/24 14/ B " 6/24 15/ B " 6/24 19/76 13

15 ROCKET HAMMERS The world s finest tubular steel handled hammer. Rocket hammers feature a head forged of high carbon steel with a heat-treated steel handle for strength and balance. Each hammer comes with a cushioned rubber grip for greater shock absorption and a reduction in fatigue. Rocket Curved Claw, Polished Finish, Chrome Plated Handle / /2" 4/24 6/ /2" 4/24 7/ /2" 4/24 8/48 Rocket Ripper Straight Claw, Polished Head, Chrome Plated Handle 00711, Long Handle 00721, Long Handle, M illed Face / /2" 4/24 7/ /4" 4/24 9/ " 4/20 9/ " 4/20 9/ " 4/20 9/ " 4/20 9/46 Repair Grip Kits Includes a grip, adhesive strips and instructions for replacing a worn out grip. USED FOR 13 oz tubular steel shaft 1/ , 20, 22 oz. tubular steel shaft 1/1 14

16 BIO CURVE Claw Hammer Ripper Ball Peen Hammer Drilling Hammer Blacksmith Hammer Curved Claw, Octagon Bell, Polished Head, Ergonomic Hickory Handle / " 4/24 6/ " 4/24 8/49 Straight Claw, Polished Head, Ergonomic Hickory Handle Milled Face / " 4/24 6/ " 4/20 8/ " 4/20 8/41 Black Head with Polished Face, Sides, Peen, and Bevel, Ergonomic Hickory Handle / /4" 6/6 5/ " 6/36 7/ " 6/36 9/ /4" 6/24 13/ /4" 4/16 10/40 Polished Faces, Ergonomic Hickory Handle /2" 6/ /2" 6/ /2" 6/26 Polished Faces, Ergonomic Hickory Handle /4" 6/ /2 15 3/4" 6/ /4" 6/21 15

17 Engineers Hammer Polished Faces, Ergonomic Hickory Handle /2 15 3/4" 6/ /4" 6/ /4" 6/28 WOOD D HAMMERS Commercial/Industrial Ripper Straight Claw, Round Bell, Black Head, Polished Face and Bevel / /4" 4/24 8/ /4" 4/24 10/59 SUPERDUTY Curved Claw, Round Bell, Polished Head / /8" 6/24 9/ /8" 6/24 11/45 SUPERDUTY Ripper Straight Claw, Round Bell, Polished Head / /2" 6/24 9/ /8" 6/24 11/ /8" 6/24 13/52 SUPERDUTY Curved Claw, Round Bell, Black Head, Polished Face and Bevel / /8" 6/24 9/ /8" 6/24 11/45 SUPERDUTY Ripper Straight Claw, Round Bell, Black head, Polished Face and Bevel / /8" 6/24 9/ /8" 6/24 11/ /4" 6/24 13/52 16

18 FIBERGLASS D HAMMERS These rugged top quality hammers have a forged high carbon steel head and feature a fiberglass handle for strength and durability. SUPERDUTY Curved Claw, Round Bell, Polished Head / /8" 6/24 10/ /8" 6/24 12/48 SUPERDUTY Ripper Straight Claw, Round Bell, Polished Head / /8" 6/24 10/ /8" 6/24 12/ /8" 6/24 15/60 SUPERDUTY Black Head, Polished Face and Bevel / /8" 6/24 11/ /8" 6/24 12/50 SUPERDUTY Ripper Black Head, Polished Face and Bevel / /8" 6/24 11/ /8" 6/24 12/ /4" 6/24 13/54 17

19 BODY AND FENDER These specialty tools have been developed to assist the homeowner or mechanic in the repair of sheet metal and other body cosmetics, principally on automobiles and other vehicles. Each hammer has a forged high carbon steel head with a select hickory handle for strength and durability. Each dolly is made of forged steel with a painted and polished finish. Light Bumping Hammer Designed for short reach areas with one low crown square face. DIAMETER DIAMETER SQ. FACE RD. FACE /4" 3 1/2" 7/8" 1 3/16" 4 Bumping Hammer Designed for long reach areas with a square face to permit dinging close to moulding or beading. DIAMETER DIAMETER SQ. FACE RD. FACE " 5 1/8" 1 1/2" 1 5/8" 4 Cross Peen Hammer Designed for finishing sharp corners around mouldings and caulking. DIAMETER PEEN DIM RD. FACE " 5 3/8" 2 1/2" x 3/4" 1 1/2" 4 Pointed Pick Hammer Designed for long reach and especially low spots on high crown panels. PICK DIAMETER RD. FACE " 5 3/8" 2 1/2" 1 1/2" 4 Blunt Point Hammer Designed for long reach and low spots on high crown panels, especially where care is needed to avoid punching holes in metal. PICK DIAMETER RD. FACE " 5 3/8" 2 1/2" 1 1/2" 4 18

20 All Purpose Dolly Designed as a heavy duty general purpose dolly especially suited to heavy gauge fenders. Wedge Dolly The long slender shape is preferred by many repairmen for general purpose work. The long, thin lip is useful when used on reinforced areas. Heel Dolly This design makes it possible to reach easily into sharp corners with wide radii. Universal Dolly Excellent for holding during heavy repair work. Also, the different crowned working faces, with two beading and flange lips, provide good general use features lb 12 oz lb 2 oz lb 7 oz lb 1 oz 4 9 Piece Body and Fender Set /18 19

21 GROOVER & EDGER Groovers are designed to finish concrete with a consistent seam between sections. Edgers finish concrete by leaving a contoured border. Groover 6" X 2 1/2" Grey Iron Casting, Hardwood Handle FINISH Painted CUT 1/2"W x 3/8"D / 6/36 6/38 Edger 5 3/4" X 2 5/8" Grey Iron Casting, Hardwood Handle FINISH CUT / Painted 1/2" 6/36 6/38 KNIFE & SCRAPER Putty Knife BLADE WIDTH BLADE ST EEL / /16" Tempered 12/144 1/15 Scraper Clear Hardwood Handle BLADE WIDTH /8" BLADE ST EEL Heavy duty cold rolled / 12/72 4/25 20

22 Notch Styles STYLE SIZE AND DIMENSIONS APPLICATION F 1/16 3/32 1/32 Sheet Vinyl and Comm. Vinyl Tile X 1/32 1/32 General Mastic C 1/16 3/32 1/16 Sheet Vinyl K 1/16 1/16 1/16 Linoleum and Asphalt Tile A 1/8 3/32 3/32 Linoleum D 5/32 1/8 1/8 Carpeting R 5/16 3/16 1/4 Vinyl Tile and Floor G 1/8 1/8 Covebase E 3/16 5/32 Wall and Roofing B 1/8 1/8 3/32 Carpeting M 1/4 5/16 3/8 Ceramic Floor Tile H 1/4 1/4 1/4 Thin Set Ceramic Tile J 3/16 3/16 3/16 Strip Laminated Wood & Plank L 3/32 3/32 3/32 Wood Parquet Floor N 1/4 1/4 3/8 Mortar O 1/16 1/8 1/8 Carpeting P 3/32 3/32 3/32 Carpeting 21

23 TCHED TROWELS A notched trowel is used to apply various types of mastic, cement, or adhesive. These trowels are designed with the homeowner in mind with the quality to get the job done, yet reasonably priced for the one-time user. These same aspects appeal to the contractor who uses throwaway grade tools. Installer Cold Rolled Steel Blade, Molded Polypropylene Handle CATALOG APPLICATION TCH STYLE BLADE SIZE Linoleum A 9 1/2" x 4 1/2" 12/96 7/ Linoleum & Asphalt K 9 1/2" x 4 1/2" 12/96 7/ Ceramic Tile M 9 1/2" x 4 1/2" 12/96 7/ Wall or Roofing E 9 1/2" x 4 1/2" 12/96 7/ Vinyl Tile R 9 1/2" x 4 1/2" 12/96 7/ Linoleum, Asphalt & Mastic K & X 9 1/2" x 4 1/2" 12/96 7/ Linoleum & Mastic A & X 9 1/2" x 4 1/2" 12/96 7/ Sheet Vinyl F 9 1/2" x 4 1/2" 12/96 7/ Sheet Vinyl C 9 1/2" x 4 1/2" 12/96 7/ Carpeting B 9 1/2" x 4 1/2" 12/96 7/ Mortar N 9 1/2" x 4 1/2" 12/96 7/ Carpeting P 9 1/2" x 4 1/2" 12/96 7/ Carpeting O 9 1/2" x 4 1/2" 12/96 7/ Ceramic Tile H 9 1/2" x 4 1/2" 12/96 7/ Wood Floor J & L 9 1/2" x 4 1/2" 12/96 7/58 TROWEL DISPLAY RACKS Wire Display Racks custom made for Barco trowels and quart spreaders. Fits standard pegboard. No assembly required. Trowels and spreaders not included Holds 18 Margin, Pointing or Brick Trowels Holds 12 Plastering or Notched Trowels CATALOG HOLDS / Margin, pointing, or brick trowels 1/ Rectangular trowels 1/ Quart Spreaders 1/2 22

24 MARGIN, POINTING, BRICK, AND PLASTERING TROWELS Margin trowels are used to contour corners and hard to reach square areas in concrete finishing and mastic applications. Pointing trowels are used for tight areas, finishing off edges and mortar work. Brick trowels are used to lay mortar in place for brick or stonework. Plastering trowels are used to spread and finish plaster or cement. These trowels are constructed to meet the quality needs of the homeowner or as a throwaway grade for contractors. Throwaway Margin Throwaway Pointing Nickel Plated Ferrule, Stained Hardwood Handle STEEL BLADE SIZE Margin Cold Rolled 4 1/2" 12/144 2/29 Nickel Plated Ferrule, Stained Hardwood Handle STYLE STEEL BLADE SIZE Pointing Cold Rolled 5 1/2" 12/144 2/ Brick Cold Rolled 7 3/4" 12/144 3/ Brick Cold Rolled 10" 12/144 5/56 Throwaway Plastering Cold Rolled Steel Blade, M olded Polypropylene Handle STYLE STEEL BLADE SIZE Plastering Cold Rolled 10" x 4 1/2" 12/96 7/58 Step-Up Margin Step-Up Pointing Polished Steel, Welded Assembly, Hardwood Handle BLADE / SIZE Margin 5" x 2" 12/4 Polished Steel, Welded Assembly, Hardwood Handle BLADE / SIZE Pointing 5 1/2" 12/ Brick 7 3/4" 12/ Brick 10" 6/6 23

25 Step-Up Gauging Polished Steel, Welded Assembly, Hardwood Handle BLADE SIZE / Gauging 7" 12/5 Step-Up Plastering Polished Steel, Welded Assembly, Hardwood Handle BLADE SIZE / Plastering 10" x 4 1/2" 12/5 Spreaders BARCO notched trowels and quart spreaders consist of a tempered or cold rolled steel blade, handled in wood or plastic. Spreaders are available in cold rolled steel or plastic. Spreader Cold Rolled Steel, , Plastic APPLICAT ION TCH BLADE SIZE Linoleum A 6"x 4 1/2" Adhesive V Not ch 4 1/4" x 4 1/4" 36/144 2/ Adhesive Square Notch 4 1/4" x 4 1/4" 36/144 2/22 Quart Spreader Tempered Steel Blade, M olded Polypropylene Handle APPLICAT ION TCH BLADE SIZE Linoleum A 3" 12/144 2/ Linoleum & Asphalt K 3" 12/144 2/ Mastic X 3" 12/144 2/ Wall & Roofing E 3" 12/144 2/ Covecase G 3" 12/144 2/ Ceramic Tile H 3" 12/144 2/ Flat Work - 3" 12/144 2/21 24

26 REPLACEMENT S Tampers FOR TAMPERS St raight Handle 43" All but Heavy Duty 44" Heavy Duty 48" 8 37 Tack Hammers FOR P /8" Sledge Hammers FOR MATERIAL P2490* 6-8 Hickory 24" 6 6 P2500* 6-8 Hickory 30" P2510* 6-16 Hickory 32" P2530* 6-16 Hickory 36" P2630* Hickory 36" P Fiberglass 36" P Epoxy kit Blacksmith and Engineers Hammers FOR MATERIAL P1490* 6-8 Hickory 18" P1530* 2 1/4-4 Hickory 16" P Fiberglass 16" P Epoxy kit Drilling Hammers FOR MATERIAL P1620* 2-4 Hickory 10 ½" P Fiberglass 11" 6 3 P Epoxy Kit Post Maul Handle MATERIAL P Hickory 36" 6 12 *1-Select, 3-Master, 5-Basic Grade Handle Type 25

27 Woodchoppers Mauls Hickory Fiberglass EYE TYPE EYE TYPE P3450* AXE-single bit 36" P2530* SLEDGE 36" P34506 AXE 36" P25306 SLEDGE 36" P90606 EPOXY KIT Claw Hammers FOR MATERIAL P1010* 4-7 oz Hickory 12" P1020* 13 oz Hickory 13" P1030* oz Hickory 14" 6 3 P1040* oz Hickory 14" 6 3 P1060* oz Hickory 16" P1070* oz Hickory 18" P1110* oz Hickory 14" Octagon P1150* oz Hickory 14" P1160* oz Hickory 16" P1170* oz Hickory 18" P oz Fiberglass 14" P oz Fiberglass 16" P Epoxy kit Picks P4280, P4470 No Select Grade P4280* P4470* P4520* FOR Garden Pick/ Cutter Maddox Garden- Light Cutter Mattock RR-Clay Pick MATL Hickory 36" Hickory 36" 6 12 Hickory w/poly Overstrike Guard 36" 6 15 P4530* RR-Clay Pick Hickory 36" 6 15 P45306 RR Fiberglass 36" 6 18 P Epoxy Kit *1-Select, 3-Master, 5-Basic Grade Handle Type 26

28 REPLACEMENT S Axes Single Bit, Curved Handle FOR MATERIAL P3280* 3-5 Hickory 28" P3320* 3-5 Hickory 32" P3360* 3-5 Hickory 36" P Fiberglass 36" 6 12 P Epoxy Kit Single Bit, Straight Handle P3520, P3540 no select grade FOR MATERIAL P3580* 3-5 Hickory 36" P3520* 3-5-Miner Hickory 20" 6 6 P3540* 3-5-Miner Hickory 26" Double Bit P3700* FOR 2 1/2- Cruiser MATERIAL Hickory 28" 6 6 P3760* 3-5 Hickory 36" P Fiberglass 36" 6 12 P Epoxy Kit Pulaski Axe Handle MATERIAL Hickory 36" 6 12 Sport/Camp Axes FOR P3110* 2 1/4 House 19" P3180* 2 1/4 Boy s 28" 6 6 P3040* 1 1/4 Hunter s 14" Half Hatchets/Specialty Hatchets P18003 Half 13" 6 3 P1810* Broad 14" P1880* Rig Builders 18" P1850* Lathing 14" 6 3 *1-Select, 3-Master, 5-Basic Grade Handle Type 27

29 Brick Hammers FOR P oz 10" P oz 11" P oz 12" Prospector's Picks FOR PP 13 3/8" Ball Peen Hammers P13003 no Select Grade CATALOG FOR MATERIAL P1300* 2 oz Hickory 9 ½" P1310* 4-6 oz Hickory 10 ½" P1320* 8-12 oz Hickory 12" P1340* oz Hickory 14" P1360* oz Hickory 16" 6 3 P1370* oz Hickory 16" P1380* oz Hickory 18" P oz Fiberglass 14" 6 3 P oz Fiberglass 16" BioCurve / FITS / ½" Ergonomic 6/ " Ergonomic 6/ / ¾" Ergonomic 6/ ½" Ergonomic 6/ ½" Ergonomic 6/ ½" Ergonomic 6/ / " Ergonomic 6/ Drilling 11" Ergonomic 6/ Blacksmith/ Engineers 16" Ergonomic 6/6 *1-Select, 3-Master, 5-Basic Grade Handle Type 28

30 Tools Catalog Contact Barco Industries Customer Service Toll Free: Fax: BARCO INDUSTRIES, INC MACARTHUR ROAD READING, PA TC-1007 BARCO 29 industries inc.