Chapter 6 Thermodynamics: The First Law

Size: px
Start display at page:

Download "Chapter 6 Thermodynamics: The First Law"

Transcription

1 Key Concepts 6.1 Systems Chapter 6 Thermodynamics: The First Law Systems, States, and Energy (Sections ) thermodynamics, statistical thermodynamics, system, surroundings, open system, closed system, isolated system, work, internal energy, translational kinetic energy, rotational kinetic energy, vibrational kinetic energy, mode of motion (degree of freedom), equipartition theorem, internal energy of an ideal gas, heat, calorie, adiabatic wall, diathermic (nonadiabatic) wall, first law of thermodynamics, state function, expansion work, free expansion, nonexpansion work, reversible isothermal expansion, reversible process, irreversible process, exothermic process, endothermic process, calorimetry, calorimeter, heat capacity, specific heat capacity, molar heat capacity Example 6.1a Example 6.1b Suggest a system, boundary, and surroundings for 10 moles of propane gas in a rigid metal cylinder. One choice is that the 10 moles of propane gas constitute the system, the metal cylinder and everything outside of it the surroundings, and the inside walls of the cylinder a real boundary. This is an appropriate way to study the properties of the gas alone. Suggest a system, boundary, and surroundings for 500 ml of water in an open beaker. To study the properties of water alone, it should constitute the system. The walls of the beaker constitute a real, physical boundary and the phase boundary between water and air constitutes an imaginary boundary. The surroundings consist of everything outside the boundaries including the beaker, the platform on which it rests, and the atmosphere. 6.2 Work and Energy Example 6.2a Example 6.2b Describe three commonplace examples of how work is done on or by a system. Compression of a spring: If the spring is the system, work is done on the system by the surroundings to compress the spring. Compression of a gas mixture as in an automobile engine: If the gas mixture is the system, work is done on the system by the surroundings (piston) to compress the gases. Muscle contraction: As the muscle contracts, work is done on the surroundings. Both mechanical and electrical work are involved as well as chemical processes. A plumber of mass 65 kg carries a toolbox of mass 15 kg to a fifth floor walk-up apartment 15 m above ground level. Calculate the work required for this process. Recall that (difference in potential energy) = mg h from Table 6.1 in the text. The difference in potential energy between the fifth and ground floors is equal to the work done by the plumber. The force is mg and the distance is h. Both the plumber s mass and that of the toolbox must be elevated. m = ( ) kg = 80 kg 1

2 Chapter 6 g = 9.81 m s 2 h = 15 m w = (80 kg)(9.81 m s 2 )(15 m) = J = 11.8 kj Example 6.2c Example 6.2d Describe the internal energy change and work performed when a spring is compressed or expanded. Work is done on the system by the surroundings to compress the spring. The compressed spring has a greater capacity to do work than the uncompressed spring. In each case, the internal energy of the system is increased by the amount of work done on it. U > 0 and U = U final U initial = w Therefore, w > 0 when work is done on the system. Work is done on the surroundings by the system to expand the spring. The expanded spring has a lesser capacity to do work than the unexpanded spring. The internal energy of the system is decreased by the amount of work done by it. U < 0 and U = U final U initial = w Therefore, w < 0 when work is done by the system. Describe the internal energy change and work performed when a battery is recharged. Electrical work is done on the system by the surroundings in recharging a battery. The charged battery has a greater capacity to do work than the discharged battery. The internal energy of the system is increased by the amount of work done on it. As in the case of mechanical work, w > 0 when electrical work is done on the system. 6.3 Expansion Work Example 6.3a The pressure exerted on an ideal gas at 2.00 atm and 300 K is reduced suddenly to 1.00 atm while heat is transferred to maintain the initial temperature of 300 K. Calculate q, w, and U in joules for this process. For an ideal gas undergoing an isothermal process, U = 0. The work done at constant external pressure is w = P ex V, where V = V final V initial. V initial = (nrt )/P initial = (1 mol)( L atm K 1 mol 1 )(300 K)/(2.00 atm) = 12.3 L V final = (nrt )/P final = (1 mol)( L atm K 1 mol 1 )(300 K)/(1.00 atm) = 24.6 L V = V final V initial = 24.6 L 12.3 L = 12.3 L (system expands) w = P ex V = (1.00 atm)(12.3 L) = 12.3 L atm = ( 12.3 L atm)( J L 1 atm 1 ) = J Work is done by the system on the surroundings. q = U w = 0 ( J) = J Heat is absorbed by the system from the surroundings. Example 6.3b Suppose the pressure change in Example 6.3a is carried out reversibly as well as isothermally. Calculate q, w, and U in joules for this process and compare the answers to those in the irreversible expansion in one step. The internal energy of an ideal gas depends only on temperature, and U = 0. Check the two formulas for isothermal, reversible work. Vfinal L w= nrtln = (1.00 mol)( J K mol )(300 K)ln V 12.3 L initial 2

3 Thermodynamics: The First Law Note: Example 6.3c Note: Pinitial atm or w= nrtln = (1.00 mol)( J K mol )(300 K)ln P final 1.00 atm w = J and q = J The absolute value of the work done by the system in a reversible expansion is greater than the value obtained in an irreversible expansion. It is possible to show that the maximum amount of work is always done by the system in a reversible expansion. Suppose the pressure change in Example 6.3a is carried out in the opposite direction (compression). Calculate q, w, and U in joules for this process in both a reversible and irreversible way. The labels for initial and final states are interchanged. The calculation for reversible work results simply in a change in sign. Vfinal L w= nrtln = (1.00 mol)( J K mol )(300 K)ln V 24.6 L initial = J and q = J The calculation for irreversible work results in a quite different value. w = P ex V = (2.00 atm)( 12.3 L) = L atm = (24.6 L atm)( J L 1 atm 1 ) = J and q = J The value of the work done on the system in a reversible compression is smaller than the value obtained in an irreversible compression. It is possible to show that the minimum amount of work is always done on the system in a reversible compression. 6.4 Heat Example 6.4a Example 6.4b Example 6.4c Note: Calculate the heat flow and change in internal energy if the temperature of 1 mol of Ar is increased from 300 K to 900 K. Assume the atoms behave as an ideal gas and no work is done. From Example 6.8a, U m = 3.74 kj mol 1 at 300 K. Tripling the temperature leads to U m = kj mol 1 at 900 K. q = U m = U m (900 K) U m (300 K) = ( ) kj mol 1 = 7.48 kj mol 1 Calculate the heat flow and change in internal energy if the temperature of 1 mol of H 2 is increased from 300 K to 900 K. Assume the molecules behave as an ideal gas and no work is done. In Example 6.8b, U m = 6.24 kj mol 1 at 300 K. Tripling the temperature leads to U m = kj mol 1 at 900 K. q = U m = U m (900 K) U m (300 K) = ( ) kj mol 1 = kj mol 1 Calculate the heat flow and change in internal energy if the temperature of 1 mol of H 2 O is increased from 300 K to 900 K. Assume the molecules behave as an ideal gas and no work is done. In Example 6.8c, U m = 7.48 kj mol 1 at 300 K. Tripling the temperature leads to U m = kj mol 1 at 900 K. q = U m = U m (900 K) U m (300 K) = ( ) kj mol 1 = kj mol 1 In all three examples, q and the change in internal energy are positive values, because heat flows from the surroundings into the system. The amount of heat required to increase the temperature (and internal energy) is smaller for atoms than for molecules, and is smaller for 3

4 Chapter The First Law linear molecules than for nonlinear molecules. The greater the number of modes of motion (degrees of freedom), the greater is the capacity of a species to store energy. Example 6.6 An electric stirrer performs 40 kj of work on a beaker of water and water transfers cal of heat to the surroundings. Calculate the change in internal energy of water in kj. 6.7 State Functions Convert calories to the units of kilojoules. ( cal)(4.184 J cal 1 )(10 3 kj J 1 ) = 6.3 kj Work is done on the system (water), so w = 40 kj > 0. Heat is transferred from the system to the surroundings, so q = 6.3 kj < 0. U = q + w = ( ) kj = 34 kj U > 0 and the internal energy of the system has increased. Example 6.7a Describe the state of a system composed of 1 mol of Ar(g) at 1 bar and 300 K. Example 6.7b Example 6.7c Example 6.7d Note: The pressure and temperature are uniform throughout the gas. The ideal gas equation uniquely determines the volume of the gas, V = nrt/p. All other properties applicable to a noble gas under these conditions, such as density, refractive index, and heat capacity, are fixed as well. Describe the state of the following system: a partition that separates a sample of liquid water at 10 C from a sample of water at 30 C is removed. The resulting system is not in any given state, because its properties are not fixed. The temperature and density are not uniform throughout. The system will eventually approach a uniform temperature and density as a result of diffusion. The state of the system can then be defined. For spring break, two students decide to fly from Philadelphia (initial state) to Denver (final state). Two of their classmates choose to drive from Philadelphia to Denver by way of New Orleans (intermediate state). Describe one variable whose change is the same for the two groups (state function) and another that is not. The destination (final state) and origin (initial state) are the same for both groups. The distances traveled depend on the path taken, and, presumably, are not the same for the plane and car. A laboratory technician assigned to stir an insulated beaker of water inadvertently leaves the stirrer on overnight. In the morning, the technician notes that the temperature of the water has risen 3 C. The same temperature rise can also be accomplished by heating the water using a heating mantle. Compare the two processes in terms of the change in internal energy, and the heat and work done on the system. For the two processes, the initial and final states are the same, so U is also the same. In the first process, mechanical work is done on the system, q = 0, and U = w. In the second process, w = 0, and U = q. Both q and w are clearly path dependent. Because the changes in state functions are path independent, the most convenient path may be chosen for a given change in state both in the laboratory and in calculations. 4

5 Thermodynamics: The First Law 6.8 A Molecular Interlude: The Origin of Internal Energy Example 6.8a Example 6.8b Example 6.8c Calculate the internal energy of 1 mol of Ar at 300 K. Assume the atoms behave as an ideal gas. An atom has only three degrees of freedom in translational motion. The internal energy per mole is then U m = U m (translation) = 3 2 RT = (1.5)( J K 1 mol 1 )(300 K) = J mol 1 = 3.74 kj mol 1 Calculate the internal energy of 1 mol of H 2 at 300 K. Assume the molecules behave as an ideal gas. All diatomic molecules are linear. The H 2 molecule has three degrees of freedom in translational motion and two degrees of freedom in rotational motion. The internal energy per mole is then U m = U m (translation) + U m (rotation, linear) = 3 2 RT + RT = 5 2 RT = (2.5)( J K 1 mol 1 )(300 K) = J mol 1 = 6.24 kj mol 1 Calculate the internal energy of 1 mol of H 2 O vapor at 300 K. Assume the molecules behave as an ideal gas. If we use the VSEPR model (Section 3.2), the H 2 O molecule is predicted to be nonlinear. Thus, it has three degrees of freedom in translational motion and three degrees of freedom in rotational motion. The internal energy per mole is then U m = U m (translation) + U m (rotation, nonlinear) = 3 RT + 3 RT = 3RT 2 2 = (3)( J K 1 mol 1 )(300 K) = J mol 1 = 7.48 kj mol 1 Notes: In all three examples, the internal energy is linearly proportional to the temperature of the ideal gas. The vibrational contribution to the internal energy of an ideal gas is small at room temperature and can usually be ignored. Its temperature dependence is, however, decidedly nonlinear at normal temperatures. At very high temperature, each vibrational degree of freedom of a molecule has a contribution of of 1 kt from kinetic energy and 1 kt from 2 2 potential energy if vibration is treated as a harmonic oscillator. The total contribution to the internal energy is then kt per degree of freedom for vibrational motion. Key Concepts Enthalpy (Sections ) enthalpy, heat transfer at constant pressure, heat capacity of gases, heat capacity at constant volume, heat capacity at constant pressure, molecular origin of heat capacity, physical change (phase transition), enthalpy of vaporization, enthalpy of fusion, enthalpy of freezing, enthalpy of sublimation, heating curves, temperature of a substance at its melting or boiling point Note: Study Guide notation (not used in the text) q V and q P (heat transfer at constant volume and constant pressure, respectively) 5

6 Chapter Heat Transfers at Constant Pressure Example 6.9 A gas expands against a constant external pressure and does 25 kj of expansion work on the surroundings. During the process, 60 kj of heat is absorbed by the system. Determine the values of H and U. Because this is a constant pressure process, H = q P = 60 kj. U = H P V = H + w w = 25 kj (work done by the system is negative) U = 60 kj 25 kj = 35 kj 6.10 Heat Capacities at Constant Volume and Constant Pressure Example 6.10 The heat capacity, C P, of moles of F 2 is J K 1 at 25 C. Assuming the gas is ideal, calculate the molar heat capacity at constant volume, C V,m, for F 2 at 25 C. C P,m = C P /n = (46.95 J K 1 )/(1.500 mol) = J K 1 mol 1 C V,m = C P,m R = ( ) J K 1 mol 1 = J K 1 mol A Molecular Interlude: The Origin of the Heat Capacities of Gases Example 6.11a Calculate the molar heat capacity at constant volume, C V,m, for F 2 at 25 C. Compare the calculated value to the experimental one determined in Example Diatomic molecules are linear. C V,m = 5 2 R = J K 1 mol 1 The experimental value of J K 1 mol 1 is slightly larger than the calculated one. The difference is associated with vibrational motion of the F 2 molecule. Example 6.11b A 100-L vessel containing 6.00 mol of H 2 (g) at 2.00 atm is cooled to K. Assuming the gas behaves ideally, calculate U and H for this process. Calculate the initial temperature, T initial. T initial = PV/nR = [(2.00 atm)(100 L)]/[(6.00 mol)( L atm K 1 mol 1 )] T initial = K T = T final T initial = ( ) K = K C V,m = 5 2 R = J K 1 mol 1 = kj K 1 mol 1 C P,m = C V,m + R = J K 1 mol 1 = kj K 1 mol 1 From Sections 6.5 and 6.10 U = nc V,m T = (6.00 mol)( kj K 1 mol 1 )( K) = 25.3 kj H = nc P,m T = (6.00 mol)( kj K 1 mol 1 )( K) = 35.5 kj Note: This equation applies even though pressure is not constant. For an ideal gas, enthalpy depends only on temperature. 6

7 Thermodynamics: The First Law 6.12 The Enthalpy of Physical Change Example 6.12 Considering the relative strength of intermolecular forces in the liquid phase, arrange the following substances in the order of increasing enthalpy of vaporization at the boiling point of the liquid: CH 3 OH, C 6 H 6, Hg, CH 4. The intermolecular interactions of significance for the substances listed are London forces for C 6 H 6 and CH 4, metallic bonding for Hg, and hydrogen bonding for CH 3 OH. The relative strength of intermolecular forces increases in the order London forces, hydrogen bonding, and metallic interactions. The strength of London interactions increases with the number of electrons in the molecule (polarizability); thus, C 6 H 6 has stronger interactions than CH 4. The expected order of increasing enthalpy of vaporization is CH 4, C 6 H 6, CH 3 OH, and Hg. The values of standard enthalpies of vaporization in Table 6.3 in the text are 8.2, 30.8, 35.3, and 59.3 kj mol 1, respectively. The Enthalpy of Chemical Change (Sections ) Key Concepts reaction enthalpy, thermochemical equation, combustion, standard state, standard reaction enthalpy, Hess s law, reaction sequence, overall reaction, standard enthalpy of combustion, standard enthalpy of formation, lattice enthalpy, Born-Haber cycle, bond enthalpy, mean (average) bond enthalpy, temperature dependence of reaction enthalpy, Kirchhoff s law 6.14 Reaction Enthalpies Example 6.14a Reaction with oxygen is a combustion reaction. Write the thermochemical equation for the combustion of hydrogen gas at 25 C. For the reaction of 1 mol H 2 (g), q P = kj. Determine the reaction enthalpy, H r. The chemical equation H 2 (g) + O 2 (g) H 2 O(l) is balanced by inspection. Note that water at 25 C is a liquid. The balanced equation with the smallest whole integer coefficients is 2H 2 (g) + O 2 (g) 2 H 2 O(l) For a constant pressure reaction, q P = H. The heat change is given for 1 mol H 2 (g), but the balanced equation requires 2 mol. Thus, H = 2( kj) = kj. The thermochemical equation is 2H 2 (g) + O 2 (g) 2 H 2 O(l) H = kj The reaction enthalpy is H r = kj mol 1. Here mol refers to the enthalpy change for 2 mol H 2 (g), 1 mol O 2 (g), and 2 mol H 2 O(l). More explicitly, H r = kj (2 mol H 2 ) 1, H r = kj (1 mol O 2 ) 1, and H r = kj (2 mol H 2 O) 1. 7

8 Chapter 6 Example 6.14b Use the thermochemical equation given below to determine how much heat is released, q surr, when 350 g of propane, C 3 H 8 (g), is burned completely in a backyard barbecue at 25 C. C 3 H 8 (g) + 5 O 2 (g) 3 CO 2 (g) + 4 H 2 O(l) H = 2220 kj The reaction enthalpy is H r = 2220 kj mol 1. Here mol refers to the enthalpy change for 1 mol C 3 H 8 (g), 5 mol O 2 (g), 3 mol CO 2 (g), and 4 mol H 2 O(l). More explicitly, H r = 2220 kj (1 mol C 3 H 8 ) 1. The molar mass of propane is 3(12.01) + 8(1.0079) = g mol 1. The number of moles of propane is then (350 g)/(44.09 g mol 1 ) = mol. The heat change for the system is q P = n H r = (7.938 mol)( 2220 kj mol 1 ) = kj. The heat released to the surroundings is q surr = q P = kj = 17.6 MJ The Relation Between H and U Example 6.15a Calculate the change in internal energy, U, for the combustion reaction in Example 6.14b. C 3 H 8 (g) + 5 O 2 (g) 3 CO 2 (g) + 4 H 2 O(l) H = 2220 kj H U + ( n gas )RT and U H ( n gas )RT n gas = n(co 2 ) [n(c 3 H 8 ) + n(o 2 )] = 3 (1 + 5) = 3 6 = 3 Be careful to exclude liquid water. ( n gas )RT = ( 3 mol)( J K 1 mol 1 )( K) = 7437 J = kj U H ( n gas )RT = 2220 kj ( kj) = 2213 kj Note: Use consistent energy units, either J or kj. The internal energy change is a more positive value than the enthalpy change for a reaction that consumes gas. The difference between H and U is small, only about 0.3%. Example 6.15b Calculate the change in internal energy, U, for the dissociation of hydrogen gas into atoms at 25 C, given the following thermochemical equation: H 2 (g) 2 H(g) H = kj n gas = n(h) n(h 2 ) = 2 1 = +1 ( n gas )RT = (+1 mol)( J K 1 mol 1 )( K) = J = kj U H ( n gas )RT = kj ( kj) = kj Note: The internal energy change is a more negative value than the enthalpy change for a reaction that produces gas. The difference between H and U is small, only about 0.6% Standard Reaction Enthalpies Example 6.16 Compare the following two thermochemical reactions at 25 C. Comment on the nature of the difference in standard reaction enthalpy between reaction (2) and reaction (1). (1) C 3 H 8 (g) + 5 O 2 (g) 3 CO 2 (g) + 4 H 2 O(l) H = 2220 kj (2) C 3 H 8 (g) + 5 O 2 (g) 3 CO 2 (g) + 4 H 2 O(g) H = 2044 kj Reaction (2) is less exothermic than reaction (1). Reaction (2) produces water vapor and reaction (1) produces liquid water. For reaction (1), H r = 2220 kj mol 1. For reaction (2), H r = 2044 kj mol 1. Recall that mol refers to 1 mol C 3 H 8, 5 mol O 2, 3 mol CO 2, and 4 mol H 2 O. The enthalpy of vaporization of water is kj mol 1 at 25 C. The difference 8

9 Thermodynamics: The First Law in standard reaction enthalpies between reaction (2) and reaction (1) is 176 kj (4 mol H 2 O) 1 or 44 kj mol 1, which is the enthalpy of vaporization of water at 25 C. Thus, the difference corresponds to the vaporization of 4 mol of liquid water at 25 C. The thermochemical equations may be combined by subtracting reaction (1) from reaction (2). The result is 4H 2 O(l) 4 H 2 O(g) H = +176 kj Changing the stoichiometric coefficients to the simplest whole integers yields H 2 O(l) H 2 O(g) H r = +44 kj mol 1 = H vap Combining thermochemical equations is an application of Hess s law, which is discussed in the next section Combining Reaction Enthalpies: Hess s Law Example 6.17 Determine the standard reaction enthalpy for (3) 2 SO 2 (g) + O 2 (g) 2 SO 3 (g) H =? Use Hess s law to combine combustion reactions (1) and (2) given below. (1) 2 S(s) + 3 O 2 (g) 2 SO 3 (g) H = 792 kj (2) S(g) + O 2 (g) SO 2 (g) H = 297 kj In reaction (1), the proper number of moles of product SO 3 is present, and the reaction may be combined as written. In reaction (2), the number of moles of SO 2 needs to be doubled and the reactants and products interchanged. The thermochemical equations that combine to give reaction (3) are then (1) 2 S(s) + 3 O 2 (g) 2 SO 3 (g) H = 792 kj 2 (2) 2 SO 2 (g) 2 S(s) + 2 O 2 (g) H = +594 kj (3) 2 SO 2 (g) + O 2 (g) 2 SO 3 (g) H = 198 kj 6.18 The Heat Output of Reactions Example 6.18a Write a balanced thermochemical equation for the combustion of one mole of octane (use Table 6.4 in the text). Suppose an average automobile travels 11,000 miles in a year and averages 21.0 miles per gallon of gasoline. Approximating gasoline as octane and assuming a gallon of gasoline has a mass of 2.66 kg, calculate the enthalpy produced from the combustion of fossil fuel and used by an average automobile per year. Assume the complete combustion of octane in the engine. The thermochemical equation for one mole of octane is (Table 6.4 in the text) C 8 H 18 (l) O 2(g) 8 CO 2 (g) + 9 H 2 O(l) H c = 5471 kj mol 1 ( miles / 21.0 miles gallon 1 ) = 524 gallons of gasoline or octane (524 gallons 2.66 kg gallon 1 ) = kg = g molar mass of octane = [8(12.01) + 18(1.0079)] = g mol 1 ( g / g mol 1 ) = mol octane per year (5471 kj mol mol) = kj = 66.7 GJ per year Example 6.18b How many grams of CO 2 (g) are added to the atmosphere by the average automobile in one year? Use the results of Example 6.18a g = 4.29 Mg of CO 2 (g) 9

10 Chapter Standard Enthalpies of Formation Example 6.19a Using enthalpy of formation values in Appendix 2A, calculate the enthalpy of combustion of two moles of octane. The thermochemical equation for the combustion of two moles of octane is 2 C 8 H 18 (l) + 25 O 2 (g) 16 CO 2 (g) + 18 H 2 O(l) H c =? The standard enthalpy of formation of an element in its most stable form is 0. Therefore, H f [O 2 (g)] = 0. H r = n H f (products) n H f (reactants) = H c = 16 H f [CO 2 (g)] + 18 H f [H 2 O(l)] 2 H f [C 8 H 18 (l)] = 16( kj mol 1 ) + 18( kj mol 1 ) 2( kj mol 1 ) = kj mol 1 = kj mol 1 at K Recall that mol refers to 2 mol of C 8 H 18, 25 mol O 2, 16 mol CO 2, and 18 mol H 2 O. Example 6.19b Using enthalpy of formation values in Appendix 2A, calculate the enthalpy of dissociation of one mole of hydrogen molecules into hydrogen atoms. H 2 (g) 2 H(g) H r =? H r = 2 H f [H(g)] = 2( kj mol 1 ) = kj mol 1 at K This enthalpy change is also known as the bond enthalpy, H B (H H), defined in Section Note: It is possible to obtain an unknown enthalpy of formation if a reaction enthalpy and the other enthalpies of formation in that reaction are known. See Example 6.10 in the text Bond Enthalpies Example 6.21a Write a thermochemical equation for breaking one mol of C H bonds in methane, CH 4. The enthalpy of formation of CH 3 (g) is kj mol 1. Use Appendix 2A for other data. CH 4 (g) CH 3 (g) + H(g) H r = H B (C H) H r = H f [CH 3 (g)] + H f [H(g)] H f [CH 4 (g)] = ( 74.81) kj mol 1 = kj mol 1 = H B (C H) The C H bond has an average bond enthalpy of 412 kj mol 1 in polyatomic molecules (see Table 6.8 in the text). Note that mol refers to the amount of C H bonds. Breaking the first C H bond in methane requires more heat than subsequent ones. Example 6.21b Write a thermochemical equation for breaking one mol of carbonyl C H bonds in ethanal (acetaldehyde), CH 3 COH. The enthalpy of formation of CH 3 CO(g) is 18.8 kj mol 1. Use Appendix 2A for other data. CH 3 COH(g) CH 3 CO(g) + H(g) H r = H B (C H) H r = H f [CH 3 CO(g)] + H f [H(g)] H f [CH 3 COH(g)] = ( ) kj mol 1 = kj mol 1 = H B (C H) The carbonyl C H bond in ethanal is considerably weaker than the average C H bond enthalpy in polyatomic molecules. 10

11 Thermodynamics: The First Law Example 6.21c Calculate the average C H bond enthalpy in methane, CH 4. Use the data in Appendix 2A. CH 4 (g) C(g) + 4 H(g) H r = 4 H B (C H) H r = H f [C(g)] + 4 H f [H(g)] H f [CH 4 (g)] = (217.97) ( 74.81) kj mol 1 = kj mol 1 H B (C H) = H r /4 = kj mol 1 The average C H bond enthalpy in methane is slightly larger than the average C H bond enthalpy in polyatomic molecules. Example 6.21d Calculate the average C=O bond enthalpy in carbon dioxide, CO 2. The enthalpy of formation of O(g) is kj mol 1. Use Appendix 2A for other data. CO 2 (g) C(g) + 2 O(g) H r = 2 H B (C=O) H r = H f [C(g)] + 2 H f [O(g)] H f [CO 2 (g)] = (249.17) ( ) kj mol 1 = kj mol 1 H B (C=O) = H r /2 = kj mol 1 The C=O double bond in carbon dioxide is considerably stronger than the average C=O bond enthalpy of 743 kj mol 1 in polyatomic molecules The Variation of Reaction Enthalpy with Temperature Example 6.22a Calculate a value for the enthalpy of vaporization of liquid water at K. Use Kirchhoff s law to estimate the enthalpy of vaporization of liquid water at the normal boiling point of K. Compare the value to the one in Table 6.3 in the text. Use the data in Appendix 2A. H 2 O(l) H 2 O(g) H r = H vap H r = H f [H 2 O(g)] H f [H 2 O(l)] = ( ) kj mol 1 = kj mol 1 = H vap at K C P = C P,m [H 2 O(g)] C P,m [H 2 O(l)] = J K 1 mol 1 = J K 1 mol 1 = kj K 1 mol 1 H vap ( K) = H vap ( K) + C P ( K) = ( )(75.00) = kj mol 1 = kj mol 1 The value in Table 6.3 in the text is 40.7 kj mol 1. The approximation is an excellent one in this case. Example 6.22b The bond enthalpy of H H is 436 kj mol 1 at K. Use Kirchhoff s law to estimate the bond enthalpy at 0 K. Use the data in Appendix 2A. H 2 (g) 2 H(g) H r = H B (H H) = 436 kj mol 1 at K C P = 2C P,m [H(g)] C P,m [H 2 (g)] = 2(20.78) J K 1 mol 1 = J K 1 mol 1 = kj K 1 mol 1 H B (0 K) = H B ( K) + C P ( K) = ( )( ) = kj mol 1 = 432 kj mol 1 The spectroscopic dissociation energy of H 2 (g) is kj mol 1, which corresponds to a thermodynamic temperature of absolute zero. Any physical change of state that occurs at low temperature is deliberately ignored. 11

12 Chapter 6 Example 6.22c If H = kj for reaction (1) at 25 C, calculate H for reaction (2) at 0 C. (1) 2 H 2 (g) + O 2 (g) 2 H 2 O(l) (2) 2 H (g) + O 2 2(g) 2 H 2 O(s) Solve the problem in two parts. First use Kirchoff s law to calculate H for Reaction (1) at 0 C. Then consider the phase change from liquid water to solid water (Hess s law). The following information is taken from Table 6.3 in the text and Appendix 2A. H fus [H 2 O] = 6.01 kj mol 1 C P,m [H 2 (g)] = J K 1 mol 1 H = kj for reaction (2) at 0 C C P,m [H 2 O(l)] = J K 1 mol 1 C P,m [O 2 (g)] = J K 1 mol 1 Note: This example illustrates how to modify Kirchoff s law when phase changes occur. 12

Name Class Date. In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question.

Name Class Date. In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question. Assessment Chapter Test A Chapter: States of Matter In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question. 1. The kinetic-molecular

More information

Bomb Calorimetry. Example 4. Energy and Enthalpy

Bomb Calorimetry. Example 4. Energy and Enthalpy Bomb Calorimetry constant volume often used for combustion reactions heat released by reaction is absorbed by calorimeter contents need heat capacity of calorimeter q cal = q rxn = q bomb + q water Example

More information

Standard Free Energies of Formation at 298 K. Average Bond Dissociation Energies at 298 K

Standard Free Energies of Formation at 298 K. Average Bond Dissociation Energies at 298 K 1 Thermodynamics There always seems to be at least one free response question that involves thermodynamics. These types of question also show up in the multiple choice questions. G, S, and H. Know what

More information

States of Matter CHAPTER 10 REVIEW SECTION 1. Name Date Class. Answer the following questions in the space provided.

States of Matter CHAPTER 10 REVIEW SECTION 1. Name Date Class. Answer the following questions in the space provided. CHAPTER 10 REVIEW States of Matter SECTION 1 SHORT ANSWER Answer the following questions in the space provided. 1. Identify whether the descriptions below describe an ideal gas or a real gas. ideal gas

More information

THE KINETIC THEORY OF GASES

THE KINETIC THEORY OF GASES Chapter 19: THE KINETIC THEORY OF GASES 1. Evidence that a gas consists mostly of empty space is the fact that: A. the density of a gas becomes much greater when it is liquefied B. gases exert pressure

More information

UNIT 1 THERMOCHEMISTRY

UNIT 1 THERMOCHEMISTRY UNIT 1 THERMOCHEMISTRY THERMOCHEMISTRY LEARNING OUTCOMES Students will be expected to: THERMOCHEMISTRY STSE analyse why scientific and technological activities take place in a variety individual and group

More information

The first law: transformation of energy into heat and work. Chemical reactions can be used to provide heat and for doing work.

The first law: transformation of energy into heat and work. Chemical reactions can be used to provide heat and for doing work. The first law: transformation of energy into heat and work Chemical reactions can be used to provide heat and for doing work. Compare fuel value of different compounds. What drives these reactions to proceed

More information

Energy and Chemical Reactions. Characterizing Energy:

Energy and Chemical Reactions. Characterizing Energy: Energy and Chemical Reactions Energy: Critical for virtually all aspects of chemistry Defined as: We focus on energy transfer. We observe energy changes in: Heat Transfer: How much energy can a material

More information

Thermochemistry. r2 d:\files\courses\1110-20\99heat&thermorans.doc. Ron Robertson

Thermochemistry. r2 d:\files\courses\1110-20\99heat&thermorans.doc. Ron Robertson Thermochemistry r2 d:\files\courses\1110-20\99heat&thermorans.doc Ron Robertson I. What is Energy? A. Energy is a property of matter that allows work to be done B. Potential and Kinetic Potential energy

More information

5. Which temperature is equal to +20 K? 1) 253ºC 2) 293ºC 3) 253 C 4) 293 C

5. Which temperature is equal to +20 K? 1) 253ºC 2) 293ºC 3) 253 C 4) 293 C 1. The average kinetic energy of water molecules increases when 1) H 2 O(s) changes to H 2 O( ) at 0ºC 3) H 2 O( ) at 10ºC changes to H 2 O( ) at 20ºC 2) H 2 O( ) changes to H 2 O(s) at 0ºC 4) H 2 O( )

More information

Chapter 4 Practice Quiz

Chapter 4 Practice Quiz Chapter 4 Practice Quiz 1. Label each box with the appropriate state of matter. A) I: Gas II: Liquid III: Solid B) I: Liquid II: Solid III: Gas C) I: Solid II: Liquid III: Gas D) I: Gas II: Solid III:

More information

7. 1.00 atm = 760 torr = 760 mm Hg = 101.325 kpa = 14.70 psi. = 0.446 atm. = 0.993 atm. = 107 kpa 760 torr 1 atm 760 mm Hg = 790.

7. 1.00 atm = 760 torr = 760 mm Hg = 101.325 kpa = 14.70 psi. = 0.446 atm. = 0.993 atm. = 107 kpa 760 torr 1 atm 760 mm Hg = 790. CHATER 3. The atmosphere is a homogeneous mixture (a solution) of gases.. Solids and liquids have essentially fixed volumes and are not able to be compressed easily. have volumes that depend on their conditions,

More information

Final Exam CHM 3410, Dr. Mebel, Fall 2005

Final Exam CHM 3410, Dr. Mebel, Fall 2005 Final Exam CHM 3410, Dr. Mebel, Fall 2005 1. At -31.2 C, pure propane and n-butane have vapor pressures of 1200 and 200 Torr, respectively. (a) Calculate the mole fraction of propane in the liquid mixture

More information

Thermochemical equations allow stoichiometric calculations.

Thermochemical equations allow stoichiometric calculations. CHEM 1105 THERMOCHEMISTRY 1. Change in Enthalpy ( H) Heat is evolved or absorbed in all chemical reactions. Exothermic reaction: heat evolved - heat flows from reaction mixture to surroundings; products

More information

SUPPLEMENTARY TOPIC 3 ENERGY AND CHEMICAL REACTIONS

SUPPLEMENTARY TOPIC 3 ENERGY AND CHEMICAL REACTIONS SUPPLEMENTARY TOPIC 3 ENERGY AND CHEMICAL REACTIONS Rearranging atoms. In a chemical reaction, bonds between atoms in one or more molecules (reactants) break and new bonds are formed with other atoms to

More information

Chemistry 13: States of Matter

Chemistry 13: States of Matter Chemistry 13: States of Matter Name: Period: Date: Chemistry Content Standard: Gases and Their Properties The kinetic molecular theory describes the motion of atoms and molecules and explains the properties

More information

Answer, Key Homework 6 David McIntyre 1

Answer, Key Homework 6 David McIntyre 1 Answer, Key Homework 6 David McIntyre 1 This print-out should have 0 questions, check that it is complete. Multiple-choice questions may continue on the next column or page: find all choices before making

More information

Chemistry 110 Lecture Unit 5 Chapter 11-GASES

Chemistry 110 Lecture Unit 5 Chapter 11-GASES Chemistry 110 Lecture Unit 5 Chapter 11-GASES I. PROPERITIES OF GASES A. Gases have an indefinite shape. B. Gases have a low density C. Gases are very compressible D. Gases exert pressure equally in all

More information

Introductory Chemistry, 3 rd Edition Nivaldo Tro. Roy Kennedy Massachusetts Bay Community College Wellesley Hills, Maqqwertd ygoijpk[l

Introductory Chemistry, 3 rd Edition Nivaldo Tro. Roy Kennedy Massachusetts Bay Community College Wellesley Hills, Maqqwertd ygoijpk[l Introductory Chemistry, 3 rd Edition Nivaldo Tro Quantities in Car an octane and oxygen molecules and carbon dioxide and water Chemical Reactions Roy Kennedy Massachusetts Bay Community College Wellesley

More information

ENTHALPY CHANGES FOR A CHEMICAL REACTION scaling a rxn up or down (proportionality) quantity 1 from rxn heat 1 from Δ r H. = 32.

ENTHALPY CHANGES FOR A CHEMICAL REACTION scaling a rxn up or down (proportionality) quantity 1 from rxn heat 1 from Δ r H. = 32. CHEMISTRY 103 Help Sheet #10 Chapter 4 (Part II); Sections 4.6-4.10 Do the topics appropriate for your lecture Prepared by Dr. Tony Jacob http://www.chem.wisc.edu/areas/clc (Resource page) Nuggets: Enthalpy

More information

CHEM 105 HOUR EXAM III 28-OCT-99. = -163 kj/mole determine H f 0 for Ni(CO) 4 (g) = -260 kj/mole determine H f 0 for Cr(CO) 6 (g)

CHEM 105 HOUR EXAM III 28-OCT-99. = -163 kj/mole determine H f 0 for Ni(CO) 4 (g) = -260 kj/mole determine H f 0 for Cr(CO) 6 (g) CHEM 15 HOUR EXAM III 28-OCT-99 NAME (please print) 1. a. given: Ni (s) + 4 CO (g) = Ni(CO) 4 (g) H Rxn = -163 k/mole determine H f for Ni(CO) 4 (g) b. given: Cr (s) + 6 CO (g) = Cr(CO) 6 (g) H Rxn = -26

More information

87 16 70 20 58 24 44 32 35 40 29 48 (a) graph Y versus X (b) graph Y versus 1/X

87 16 70 20 58 24 44 32 35 40 29 48 (a) graph Y versus X (b) graph Y versus 1/X HOMEWORK 5A Barometer; Boyle s Law 1. The pressure of the first two gases below is determined with a manometer that is filled with mercury (density = 13.6 g/ml). The pressure of the last two gases below

More information

CHEM 36 General Chemistry EXAM #1 February 13, 2002

CHEM 36 General Chemistry EXAM #1 February 13, 2002 CHEM 36 General Chemistry EXAM #1 February 13, 2002 Name: Serkey, Anne INSTRUCTIONS: Read through the entire exam before you begin. Answer all of the questions. For questions involving calculations, show

More information

Gas Laws. The kinetic theory of matter states that particles which make up all types of matter are in constant motion.

Gas Laws. The kinetic theory of matter states that particles which make up all types of matter are in constant motion. Name Period Gas Laws Kinetic energy is the energy of motion of molecules. Gas state of matter made up of tiny particles (atoms or molecules). Each atom or molecule is very far from other atoms or molecules.

More information

HEAT UNIT 1.1 KINETIC THEORY OF GASES. 1.1.1 Introduction. 1.1.2 Postulates of Kinetic Theory of Gases

HEAT UNIT 1.1 KINETIC THEORY OF GASES. 1.1.1 Introduction. 1.1.2 Postulates of Kinetic Theory of Gases UNIT HEAT. KINETIC THEORY OF GASES.. Introduction Molecules have a diameter of the order of Å and the distance between them in a gas is 0 Å while the interaction distance in solids is very small. R. Clausius

More information

1. Thermite reaction 2. Enthalpy of reaction, H 3. Heating/cooling curves and changes in state 4. More thermite thermodynamics

1. Thermite reaction 2. Enthalpy of reaction, H 3. Heating/cooling curves and changes in state 4. More thermite thermodynamics Chem 105 Fri 10-23-09 1. Thermite reaction 2. Enthalpy of reaction, H 3. Heating/cooling curves and changes in state 4. More thermite thermodynamics 10/23/2009 1 Please PICK UP your graded EXAM in front.

More information

= 1.038 atm. 760 mm Hg. = 0.989 atm. d. 767 torr = 767 mm Hg. = 1.01 atm

= 1.038 atm. 760 mm Hg. = 0.989 atm. d. 767 torr = 767 mm Hg. = 1.01 atm Chapter 13 Gases 1. Solids and liquids have essentially fixed volumes and are not able to be compressed easily. Gases have volumes that depend on their conditions, and can be compressed or expanded by

More information

Thermodynamics AP Physics B. Multiple Choice Questions

Thermodynamics AP Physics B. Multiple Choice Questions Thermodynamics AP Physics B Name Multiple Choice Questions 1. What is the name of the following statement: When two systems are in thermal equilibrium with a third system, then they are in thermal equilibrium

More information

Module 5: Combustion Technology. Lecture 34: Calculation of calorific value of fuels

Module 5: Combustion Technology. Lecture 34: Calculation of calorific value of fuels 1 P age Module 5: Combustion Technology Lecture 34: Calculation of calorific value of fuels 2 P age Keywords : Gross calorific value, Net calorific value, enthalpy change, bomb calorimeter 5.3 Calculation

More information

KINETIC MOLECULAR THEORY OF MATTER

KINETIC MOLECULAR THEORY OF MATTER KINETIC MOLECULAR THEORY OF MATTER The kinetic-molecular theory is based on the idea that particles of matter are always in motion. The theory can be used to explain the properties of solids, liquids,

More information

Thermodynamics. Thermodynamics 1

Thermodynamics. Thermodynamics 1 Thermodynamics 1 Thermodynamics Some Important Topics First Law of Thermodynamics Internal Energy U ( or E) Enthalpy H Second Law of Thermodynamics Entropy S Third law of Thermodynamics Absolute Entropy

More information

Unit 5 Practice Test. Name: Class: Date: Multiple Choice Identify the choice that best completes the statement or answers the question.

Unit 5 Practice Test. Name: Class: Date: Multiple Choice Identify the choice that best completes the statement or answers the question. Name: Class: Date: Unit 5 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1) The internal energy of a system is always increased by. A) adding

More information

Exam 4 Practice Problems false false

Exam 4 Practice Problems false false Exam 4 Practice Problems 1 1. Which of the following statements is false? a. Condensed states have much higher densities than gases. b. Molecules are very far apart in gases and closer together in liquids

More information

Test 5 Review questions. 1. As ice cools from 273 K to 263 K, the average kinetic energy of its molecules will

Test 5 Review questions. 1. As ice cools from 273 K to 263 K, the average kinetic energy of its molecules will Name: Thursday, December 13, 2007 Test 5 Review questions 1. As ice cools from 273 K to 263 K, the average kinetic energy of its molecules will 1. decrease 2. increase 3. remain the same 2. The graph below

More information

Problem Set 3 Solutions

Problem Set 3 Solutions Chemistry 360 Dr Jean M Standard Problem Set 3 Solutions 1 (a) One mole of an ideal gas at 98 K is expanded reversibly and isothermally from 10 L to 10 L Determine the amount of work in Joules We start

More information

Thermodynamics. Chapter 13 Phase Diagrams. NC State University

Thermodynamics. Chapter 13 Phase Diagrams. NC State University Thermodynamics Chapter 13 Phase Diagrams NC State University Pressure (atm) Definition of a phase diagram A phase diagram is a representation of the states of matter, solid, liquid, or gas as a function

More information

Give all answers in MKS units: energy in Joules, pressure in Pascals, volume in m 3, etc. Only work the number of problems required. Chose wisely.

Give all answers in MKS units: energy in Joules, pressure in Pascals, volume in m 3, etc. Only work the number of problems required. Chose wisely. Chemistry 45/456 0 July, 007 Midterm Examination Professor G. Drobny Universal gas constant=r=8.3j/mole-k=0.08l-atm/mole-k Joule=J= Nt-m=kg-m /s 0J= L-atm. Pa=J/m 3 =N/m. atm=.0x0 5 Pa=.0 bar L=0-3 m 3.

More information

Chapter 18 Temperature, Heat, and the First Law of Thermodynamics. Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57

Chapter 18 Temperature, Heat, and the First Law of Thermodynamics. Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57 Chapter 18 Temperature, Heat, and the First Law of Thermodynamics Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57 Thermodynamics study and application of thermal energy temperature quantity

More information

Chem 1A Exam 2 Review Problems

Chem 1A Exam 2 Review Problems Chem 1A Exam 2 Review Problems 1. At 0.967 atm, the height of mercury in a barometer is 0.735 m. If the mercury were replaced with water, what height of water (in meters) would be supported at this pressure?

More information

Review - After School Matter Name: Review - After School Matter Tuesday, April 29, 2008

Review - After School Matter Name: Review - After School Matter Tuesday, April 29, 2008 Name: Review - After School Matter Tuesday, April 29, 2008 1. Figure 1 The graph represents the relationship between temperature and time as heat was added uniformly to a substance starting at a solid

More information

Problem Set 1 3.20 MIT Professor Gerbrand Ceder Fall 2003

Problem Set 1 3.20 MIT Professor Gerbrand Ceder Fall 2003 LEVEL 1 PROBLEMS Problem Set 1 3.0 MIT Professor Gerbrand Ceder Fall 003 Problem 1.1 The internal energy per kg for a certain gas is given by U = 0. 17 T + C where U is in kj/kg, T is in Kelvin, and C

More information

CHEMISTRY. Matter and Change. Section 13.1 Section 13.2 Section 13.3. The Gas Laws The Ideal Gas Law Gas Stoichiometry

CHEMISTRY. Matter and Change. Section 13.1 Section 13.2 Section 13.3. The Gas Laws The Ideal Gas Law Gas Stoichiometry CHEMISTRY Matter and Change 13 Table Of Contents Chapter 13: Gases Section 13.1 Section 13.2 Section 13.3 The Gas Laws The Ideal Gas Law Gas Stoichiometry State the relationships among pressure, temperature,

More information

CHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING

CHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING CHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING Essential Standard: STUDENTS WILL UNDERSTAND THAT THE PROPERTIES OF MATTER AND THEIR INTERACTIONS ARE A CONSEQUENCE OF THE STRUCTURE OF MATTER,

More information

Chapter 10. Can You... 1. draw the Lewis structure for a given covalently bonded molecule?

Chapter 10. Can You... 1. draw the Lewis structure for a given covalently bonded molecule? Chapter 10 Can You... 1. draw the Lewis structure for a given covalently bonded molecule? e.g. SF 6 and CH 3 Cl 2. identify and count the number of non-bonding and bonding domains within a given covalently

More information

Calculations with Chemical Formulas and Equations

Calculations with Chemical Formulas and Equations Chapter 3 Calculations with Chemical Formulas and Equations Concept Check 3.1 You have 1.5 moles of tricycles. a. How many moles of seats do you have? b. How many moles of tires do you have? c. How could

More information

CHEM 120 Online Chapter 7

CHEM 120 Online Chapter 7 CHEM 120 Online Chapter 7 Date: 1. Which of the following statements is not a part of kinetic molecular theory? A) Matter is composed of particles that are in constant motion. B) Particle velocity increases

More information

Determination of the enthalpy of combustion using a bomb calorimeter TEC

Determination of the enthalpy of combustion using a bomb calorimeter TEC Determination of the enthalpy of TEC Related concepts First law of thermodynamics, Hess s law of constant heat summation, enthalpy of combustion, enthalpy of formation, heat capacity. Principle The bomb

More information

11 Thermodynamics and Thermochemistry

11 Thermodynamics and Thermochemistry Copyright ç 1996 Richard Hochstim. All rights reserved. Terms of use.» 37 11 Thermodynamics and Thermochemistry Thermodynamics is the study of heat, and how heat can be interconverted into other energy

More information

DETERMINING THE ENTHALPY OF FORMATION OF CaCO 3

DETERMINING THE ENTHALPY OF FORMATION OF CaCO 3 DETERMINING THE ENTHALPY OF FORMATION OF CaCO 3 Standard Enthalpy Change Standard Enthalpy Change for a reaction, symbolized as H 0 298, is defined as The enthalpy change when the molar quantities of reactants

More information

Transfer of heat energy often occurs during chemical reactions. A reaction

Transfer of heat energy often occurs during chemical reactions. A reaction Chemistry 111 Lab: Thermochemistry Page I-3 THERMOCHEMISTRY Heats of Reaction The Enthalpy of Formation of Magnesium Oxide Transfer of heat energy often occurs during chemical reactions. A reaction may

More information

Chapter 10 Temperature and Heat

Chapter 10 Temperature and Heat Chapter 10 Temperature and Heat What are temperature and heat? Are they the same? What causes heat? What Is Temperature? How do we measure temperature? What are we actually measuring? Temperature and Its

More information

SUGGESTION ANSWER SCHEME CHAPTER 8: THERMOCHEMISTRY. 1 (a) Use the data in the table below to answer the following questions:

SUGGESTION ANSWER SCHEME CHAPTER 8: THERMOCHEMISTRY. 1 (a) Use the data in the table below to answer the following questions: SUGGESTION ANSWER SCHEME CHAPTER 8: THERMOCHEMISTRY ANSWER SCHEME UPS 2004/2005 SK027 1 (a) Use the data in the table below to answer the following questions: Enthalpy change ΔH (kj/mol) Atomization energy

More information

IB Chemistry. DP Chemistry Review

IB Chemistry. DP Chemistry Review DP Chemistry Review Topic 1: Quantitative chemistry 1.1 The mole concept and Avogadro s constant Assessment statement Apply the mole concept to substances. Determine the number of particles and the amount

More information

Chemistry B11 Chapter 4 Chemical reactions

Chemistry B11 Chapter 4 Chemical reactions Chemistry B11 Chapter 4 Chemical reactions Chemical reactions are classified into five groups: A + B AB Synthesis reactions (Combination) H + O H O AB A + B Decomposition reactions (Analysis) NaCl Na +Cl

More information

1.4.6-1.4.8 Gas Laws. Heat and Temperature

1.4.6-1.4.8 Gas Laws. Heat and Temperature 1.4.6-1.4.8 Gas Laws Heat and Temperature Often the concepts of heat and temperature are thought to be the same, but they are not. Perhaps the reason the two are incorrectly thought to be the same is because

More information

Why? Intermolecular Forces. Intermolecular Forces. Chapter 12 IM Forces and Liquids. Covalent Bonding Forces for Comparison of Magnitude

Why? Intermolecular Forces. Intermolecular Forces. Chapter 12 IM Forces and Liquids. Covalent Bonding Forces for Comparison of Magnitude 1 Why? Chapter 1 Intermolecular Forces and Liquids Why is water usually a liquid and not a gas? Why does liquid water boil at such a high temperature for such a small molecule? Why does ice float on water?

More information

The Gas Laws. Our Atmosphere. Pressure = Units of Pressure. Barometer. Chapter 10

The Gas Laws. Our Atmosphere. Pressure = Units of Pressure. Barometer. Chapter 10 Our Atmosphere The Gas Laws 99% N 2 and O 2 78% N 2 80 70 Nitrogen Chapter 10 21% O 2 1% CO 2 and the Noble Gases 60 50 40 Oxygen 30 20 10 0 Gas Carbon dioxide and Noble Gases Pressure Pressure = Force

More information

AS1 MOLES. oxygen molecules have the formula O 2 the relative mass will be 2 x 16 = 32 so the molar mass will be 32g mol -1

AS1 MOLES. oxygen molecules have the formula O 2 the relative mass will be 2 x 16 = 32 so the molar mass will be 32g mol -1 Moles 1 MOLES The mole the standard unit of amount of a substance the number of particles in a mole is known as Avogadro s constant (L) Avogadro s constant has a value of 6.023 x 10 23 mol -1. Example

More information

CHAPTER 12. Gases and the Kinetic-Molecular Theory

CHAPTER 12. Gases and the Kinetic-Molecular Theory CHAPTER 12 Gases and the Kinetic-Molecular Theory 1 Gases vs. Liquids & Solids Gases Weak interactions between molecules Molecules move rapidly Fast diffusion rates Low densities Easy to compress Liquids

More information

Bomb Calorimetry. Electrical leads. Stirrer

Bomb Calorimetry. Electrical leads. Stirrer Bomb Calorimetry Stirrer Electrical leads Oxygen inlet valve Bomb Fuse Calorimeter Outer jacket Not shown: heating and cooling system for outer jacket, and controls that keep the outer jacket at the same

More information

The First Law of Thermodynamics

The First Law of Thermodynamics Thermodynamics The First Law of Thermodynamics Thermodynamic Processes (isobaric, isochoric, isothermal, adiabatic) Reversible and Irreversible Processes Heat Engines Refrigerators and Heat Pumps The Carnot

More information

Mr. Bracken. Multiple Choice Review: Thermochemistry

Mr. Bracken. Multiple Choice Review: Thermochemistry Mr. Bracken AP Chemistry Name Period Multiple Choice Review: Thermochemistry 1. If this has a negative value for a process, then the process occurs spontaneously. 2. This is a measure of how the disorder

More information

CHEMICAL FORMULA COEFFICIENTS AND SUBSCRIPTS. Chapter 3: Molecular analysis 3O 2 2O 3

CHEMICAL FORMULA COEFFICIENTS AND SUBSCRIPTS. Chapter 3: Molecular analysis 3O 2 2O 3 Chapter 3: Molecular analysis Read: BLB 3.3 3.5 H W : BLB 3:21a, c, e, f, 25, 29, 37,49, 51, 53 Supplemental 3:1 8 CHEMICAL FORMULA Formula that gives the TOTAL number of elements in a molecule or formula

More information

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. General Chemistry PHS 1015 Practice Exam 4 Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Which of the following statements about pressure

More information

Sample Exercise 8.1 Magnitudes of Lattice Energies

Sample Exercise 8.1 Magnitudes of Lattice Energies Sample Exercise 8.1 Magnitudes of Lattice Energies Without consulting Table 8.2, arrange the following ionic compounds in order of increasing lattice energy: NaF, CsI, and CaO. Analyze: From the formulas

More information

1. The Kinetic Theory of Matter states that all matter is composed of atoms and molecules that are in a constant state of constant random motion

1. The Kinetic Theory of Matter states that all matter is composed of atoms and molecules that are in a constant state of constant random motion Physical Science Period: Name: ANSWER KEY Date: Practice Test for Unit 3: Ch. 3, and some of 15 and 16: Kinetic Theory of Matter, States of matter, and and thermodynamics, and gas laws. 1. The Kinetic

More information

Thermodynamics Worksheet I also highly recommend Worksheets 13 and 14 in the Lab Manual

Thermodynamics Worksheet I also highly recommend Worksheets 13 and 14 in the Lab Manual Thermodynamics Worksheet I also highly recommend Worksheets 13 and 14 in the Lab Manual 1. Predict the sign of entropy change in the following processes a) The process of carbonating water to make a soda

More information

AP Chemistry 2009 Scoring Guidelines

AP Chemistry 2009 Scoring Guidelines AP Chemistry 2009 Scoring Guidelines The College Board The College Board is a not-for-profit membership association whose mission is to connect students to college success and opportunity. Founded in 1900,

More information

Test Review # 9. Chemistry R: Form TR9.13A

Test Review # 9. Chemistry R: Form TR9.13A Chemistry R: Form TR9.13A TEST 9 REVIEW Name Date Period Test Review # 9 Collision theory. In order for a reaction to occur, particles of the reactant must collide. Not all collisions cause reactions.

More information

48 Practice Problems for Ch. 17 - Chem 1C - Joseph

48 Practice Problems for Ch. 17 - Chem 1C - Joseph 48 Practice Problems for Ch. 17 - Chem 1C - Joseph 1. Which of the following concentration measures will change in value as the temperature of a solution changes? A) mass percent B) mole fraction C) molality

More information

1 Exercise 2.19a pg 86

1 Exercise 2.19a pg 86 In this solution set, an underline is used to show the last significant digit of numbers. For instance in x = 2.51693 the 2,5,1, and 6 are all significant. Digits to the right of the underlined digit,

More information

5 Answers and Solutions to Text Problems

5 Answers and Solutions to Text Problems Energy and States of Matter 5 Answers and Solutions to Text Problems 5.1 At the top of the hill, all of the energy of the car is in the form of potential energy. As it descends down the hill, potential

More information

vap H = RT 1T 2 = 30.850 kj mol 1 100 kpa = 341 K

vap H = RT 1T 2 = 30.850 kj mol 1 100 kpa = 341 K Thermodynamics: Examples for chapter 6. 1. The boiling point of hexane at 1 atm is 68.7 C. What is the boiling point at 1 bar? The vapor pressure of hexane at 49.6 C is 53.32 kpa. Assume that the vapor

More information

Intermolecular Forces

Intermolecular Forces Intermolecular Forces: Introduction Intermolecular Forces Forces between separate molecules and dissolved ions (not bonds) Van der Waals Forces 15% as strong as covalent or ionic bonds Chapter 11 Intermolecular

More information

Chapter 1 The Atomic Nature of Matter

Chapter 1 The Atomic Nature of Matter Chapter 1 The Atomic Nature of Matter 6. Substances that cannot be decomposed into two or more simpler substances by chemical means are called a. pure substances. b. compounds. c. molecules. d. elements.

More information

Chapter Three: STOICHIOMETRY

Chapter Three: STOICHIOMETRY p70 Chapter Three: STOICHIOMETRY Contents p76 Stoichiometry - The study of quantities of materials consumed and produced in chemical reactions. p70 3-1 Counting by Weighing 3-2 Atomic Masses p78 Mass Mass

More information

Chapter 4. Chemical Energy

Chapter 4. Chemical Energy hapter 4 hemical Energy Perhaps the most convenient form in which to store energy is chemical energy. The foods we eat, combined with the oxygen we breathe, store energy that our bodies extract and convert

More information

State Newton's second law of motion for a particle, defining carefully each term used.

State Newton's second law of motion for a particle, defining carefully each term used. 5 Question 1. [Marks 20] An unmarked police car P is, travelling at the legal speed limit, v P, on a straight section of highway. At time t = 0, the police car is overtaken by a car C, which is speeding

More information

Stoichiometry. Lecture Examples Answer Key

Stoichiometry. Lecture Examples Answer Key Stoichiometry Lecture Examples Answer Key Ex. 1 Balance the following chemical equations: 3 NaBr + 1 H 3 PO 4 3 HBr + 1 Na 3 PO 4 2 C 3 H 5 N 3 O 9 6 CO 2 + 3 N 2 + 5 H 2 O + 9 O 2 2 Ca(OH) 2 + 2 SO 2

More information

The energy level diagram for this reaction is shown below.

The energy level diagram for this reaction is shown below. Q. Methanol can be made when methane reacts with oxygen. (a) The energy level diagram for this reaction is shown below. (i) What is the energy change represented by A? () (ii) Use the energy level diagram

More information

Thermodynamics and Equilibrium

Thermodynamics and Equilibrium Chapter 19 Thermodynamics and Equilibrium Concept Check 19.1 You have a sample of 1.0 mg of solid iodine at room temperature. Later, you notice that the iodine has sublimed (passed into the vapor state).

More information

Phys222 W11 Quiz 1: Chapters 19-21 Keys. Name:

Phys222 W11 Quiz 1: Chapters 19-21 Keys. Name: Name:. In order for two objects to have the same temperature, they must a. be in thermal equilibrium.

More information

1. What is the molecular formula of a compound with the empirical formula PO and a gram-molecular mass of 284 grams?

1. What is the molecular formula of a compound with the empirical formula PO and a gram-molecular mass of 284 grams? Name: Tuesday, May 20, 2008 1. What is the molecular formula of a compound with the empirical formula PO and a gram-molecular mass of 284 grams? 2 5 1. P2O 5 3. P10O4 2. P5O 2 4. P4O10 2. Which substance

More information

CHEMISTRY GAS LAW S WORKSHEET

CHEMISTRY GAS LAW S WORKSHEET Boyle s Law Charles Law Guy-Lassac's Law Combined Gas Law For a given mass of gas at constant temperature, the volume of a gas varies inversely with pressure PV = k The volume of a fixed mass of gas is

More information

F321 MOLES. Example If 1 atom has a mass of 1.241 x 10-23 g 1 mole of atoms will have a mass of 1.241 x 10-23 g x 6.02 x 10 23 = 7.

F321 MOLES. Example If 1 atom has a mass of 1.241 x 10-23 g 1 mole of atoms will have a mass of 1.241 x 10-23 g x 6.02 x 10 23 = 7. Moles 1 MOLES The mole the standard unit of amount of a substance (mol) the number of particles in a mole is known as Avogadro s constant (N A ) Avogadro s constant has a value of 6.02 x 10 23 mol -1.

More information

Chapter 6 Chemical Calculations

Chapter 6 Chemical Calculations Chapter 6 Chemical Calculations 1 Submicroscopic Macroscopic 2 Chapter Outline 1. Formula Masses (Ch 6.1) 2. Percent Composition (supplemental material) 3. The Mole & Avogadro s Number (Ch 6.2) 4. Molar

More information

Boyles Law. At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 P = P

Boyles Law. At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 P = P Boyles Law At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 or k 1 Boyles Law Example ressure olume Initial 2.00 atm 100 cm 3

More information

YIELD YIELD REACTANTS PRODUCTS

YIELD YIELD REACTANTS PRODUCTS Balancing Chemical Equations A Chemical Equation: is a representation of a chemical reaction in terms of chemical formulas Example: 1. Word Description of a Chemical Reaction When methane gas (CH 4 ) burns

More information

stoichiometry = the numerical relationships between chemical amounts in a reaction.

stoichiometry = the numerical relationships between chemical amounts in a reaction. 1 REACTIONS AND YIELD ANSWERS stoichiometry = the numerical relationships between chemical amounts in a reaction. 2C 8 H 18 (l) + 25O 2 16CO 2 (g) + 18H 2 O(g) From the equation, 16 moles of CO 2 (a greenhouse

More information

Study the following diagrams of the States of Matter. Label the names of the Changes of State between the different states.

Study the following diagrams of the States of Matter. Label the names of the Changes of State between the different states. Describe the strength of attractive forces between particles. Describe the amount of space between particles. Can the particles in this state be compressed? Do the particles in this state have a definite

More information

Name Date Class STOICHIOMETRY. SECTION 12.1 THE ARITHMETIC OF EQUATIONS (pages 353 358)

Name Date Class STOICHIOMETRY. SECTION 12.1 THE ARITHMETIC OF EQUATIONS (pages 353 358) Name Date Class 1 STOICHIOMETRY SECTION 1.1 THE ARITHMETIC OF EQUATIONS (pages 353 358) This section explains how to calculate the amount of reactants required or product formed in a nonchemical process.

More information

Chem 338 Homework Set #5 solutions October 10, 2001 From Atkins: 5.2, 5.9, 5.12, 5.13, 5.15, 5.17, 5.21

Chem 338 Homework Set #5 solutions October 10, 2001 From Atkins: 5.2, 5.9, 5.12, 5.13, 5.15, 5.17, 5.21 Chem 8 Homework Set #5 solutions October 10, 2001 From Atkins: 5.2, 5.9, 5.12, 5.1, 5.15, 5.17, 5.21 5.2) The density of rhombic sulfur is 2.070 g cm - and that of monoclinic sulfur is 1.957 g cm -. Can

More information

Appendix D. Reaction Stoichiometry D.1 INTRODUCTION

Appendix D. Reaction Stoichiometry D.1 INTRODUCTION Appendix D Reaction Stoichiometry D.1 INTRODUCTION In Appendix A, the stoichiometry of elements and compounds was presented. There, the relationships among grams, moles and number of atoms and molecules

More information

Molar Mass of Butane

Molar Mass of Butane Cautions Butane is toxic and flammable. No OPEN Flames should be used in this experiment. Purpose The purpose of this experiment is to determine the molar mass of butane using Dalton s Law of Partial Pressures

More information

Unit 2: Quantities in Chemistry

Unit 2: Quantities in Chemistry Mass, Moles, & Molar Mass Relative quantities of isotopes in a natural occurring element (%) E.g. Carbon has 2 isotopes C-12 and C-13. Of Carbon s two isotopes, there is 98.9% C-12 and 11.1% C-13. Find

More information

FUNDAMENTALS OF ENGINEERING THERMODYNAMICS

FUNDAMENTALS OF ENGINEERING THERMODYNAMICS FUNDAMENTALS OF ENGINEERING THERMODYNAMICS System: Quantity of matter (constant mass) or region in space (constant volume) chosen for study. Closed system: Can exchange energy but not mass; mass is constant

More information

INTI COLLEGE MALAYSIA A? LEVEL PROGRAMME CHM 111: CHEMISTRY MOCK EXAMINATION: DECEMBER 2000 SESSION. 37 74 20 40 60 80 m/e

INTI COLLEGE MALAYSIA A? LEVEL PROGRAMME CHM 111: CHEMISTRY MOCK EXAMINATION: DECEMBER 2000 SESSION. 37 74 20 40 60 80 m/e CHM111(M)/Page 1 of 5 INTI COLLEGE MALAYSIA A? LEVEL PROGRAMME CHM 111: CHEMISTRY MOCK EXAMINATION: DECEMBER 2000 SESSION SECTION A Answer ALL EIGHT questions. (52 marks) 1. The following is the mass spectrum

More information

Energy Matters Heat. Changes of State

Energy Matters Heat. Changes of State Energy Matters Heat Changes of State Fusion If we supply heat to a lid, such as a piece of copper, the energy supplied is given to the molecules. These start to vibrate more rapidly and with larger vibrations

More information

Unit 3: States of Matter Practice Exam

Unit 3: States of Matter Practice Exam Page 1 Unit 3: States of Matter Practice Exam Multiple Choice. Identify the choice that best completes the statement or answers the question. 1. Two gases with unequal masses are injected into opposite

More information

Chapter 5 Principles of Chemical Reactivity: Energy and Chemical Reactions

Chapter 5 Principles of Chemical Reactivity: Energy and Chemical Reactions PRACTICING SKILLS Energy Chapter 5 Principles of Chemical Reactivity: 1. To move the lever, one uses mechanical energy. The energy resulting is manifest in electrical energy (which produces light); thermal

More information