Fiber optic connector

Transcription

1 Fiber optic connector Harsh environment Edition 2013

2 Excellence in connectivity solutions

3 Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems for electrical and optical connectivity. Our customers in communications, industrial and transportation markets appreciate that we are specialists with detailed knowledge of practical applications. We offer technical expertise in radio frequency technology, fiber optics and low frequency under one roof, thus providing a unique basis for continual innovation focused on the needs of our customers all over the world.

4

5 Table of content Market segments 6 Overview connectors for harsh environment 8 Q-ODC outdoor connector plug / socket 10 Q-ODC -12 outdoor connector plug / socket 14 ODC -2 outdoor connector plug / socket 16 ODC -4 outdoor connector plug / socket 20 Q-XCO quick-lock ruggedised SFP connector 24 XCO ruggedised exchangeable SFP connector 28 FullAXS ruggedised sealing system 30 EBC expanded beam connector 32 Cleaning of fiber optic connectors 34 Assembly code 40

6 Market segments Railway HUBER+SUHNER is the leading supplier of cables and cable systems for modern railway vehicles and related infrastructure with Low frequency products Radio frequency products Fiber optic products and solutions Engineering services Defense High quality connectivity in Airborne defence systems Avionics, airborne radar and electronic warfare Land-based defence systems Radar and electronic warfare, simulation and training systems, air traffic control radar, ILS Naval defence systems Sonar, radar and electronic warfare, underwater warfare system Automotive HUBER+SUHNER offers a wide spectrum of RADOX products for the automotive industry Wide range of RADOX cables Customised cable systems for High-voltage distribution High-voltage connection 6 HUBER+SUHNER FO connector harsh environment

7 Market segments Wind/power energy HUBER+SUHNER supplies specific connectivity solutions for applications in Solar technology Wind turbines and wind parks Conventional power generators Ship Building HUBER+SUHNER offers an extensive range of components and systems adapted to the requirements of the shipbuilding industry. These include solutions for: Cruise liners and naval vessels Ferries and yachts Port installations Communication equipment HUBER+SUHNER products are used globally in Mobile communication systems such as 2G, 2.5G, 3G, LTE (Long-Term Evolution), GSM-R, PMR networks Wireless fixed network connections Wireless LANs (WLANs) Broadband communication systems HUBER+SUHNER FO connector harsh environment 7

8 Overview connectors for harsh environment Technical data Q-ODC Q-ODC -12 ODC -2 ODC -4 Technology full ceramic 1.25 mm ferrule and sleeve plastic ferrule (PPS) full ceramic 1.25 mm ferrule and sleeve full ceramic 1.25 mm ferrule and sleeve Number of fibers Protection class IP67 IP68 IP68 IP68 Fiber types singlemode and multimode singlemode and multimode singlemode and multimode singlemode and multimode Operating temperature 1) 40 C up to +85 C 40 C up to +85 C 40 C up to +85 C 40 C up to +85 C Mating durability 200 2) 100 2) ) ) Mechanical performance tensile load 450 N plug 30 N socket tensile load 500 N plug 30 N socket tensile load 800 N plug 30 N socket tensile load 800 N plug 30 N socket Protection cap snap-on snap-on screwed screwed 1) depending on cable type 2) with repeated cleaning 3) further cable types are available 8 HUBER+SUHNER FO connector harsh environment

9 Q-XCO XCO FullAXS EBC LC with full ceramic 1.25 mm ferrule LC with full ceramic 1.25mm ferrules LC with full ceramic 1.25mm ferrules hermaphroditic expanded beam and 4 IP67 IP68 IP65 IP67 singlemode and multimode singlemode and multimode singlemode and multimode singlemode and multimode 40 C up to +85 C 40 C up to +85 C 40 C up to +70 C 46 C up to +85 C tensile load 450 N plug 30 N socket tensile load 500 N plug 30 N socket tensile load 150 N plug 30 N socket bayonet screwed bayonet screwed tensile load 1500N 500 free falls from 1.2 m height HUBER+SUHNER FO connector harsh environment 9

10 Q - O D C outdoor connector plug / socket Features 2 fibers, singlemode or multimode Compact design with 2 x 1.25 mm ferrules Built-in socket with square flange Extension connector for cable chaining Robust push-pull coupling mechanism two clearly defined mating states Highest outdoor installation safety Waterproof, dust proof and corrosion resistant Waterproof protection caps available EMI protected RoHs compliant Fulfills performance standard IEC cat. E Specifications Technology full ceramic ferrule and sleeve Housing material nickel-plated brass Mating mechanism push-pull with two clearly defined states 450 N tensile load Q-ODC plug Mechanical performance 30 N static side load Q-ODC socket 30 N tensile load Operating temperature 1) IEC C up to +85 C Mating durability IEC cycles 2) Ingress protection (mated) IEC IP67 Salt mist IEC days passed Vibration Shock IEC IEC IEC IEC ) depending on cable type 2) with repeated cleaning passed 10 Hz 500 Hz / 10 g passed category 1A/B, 2, 3 passed 50 g passed category 1, 2 Optical performance singlemode typ db 97% 0.45 db Insertion loss / IEC multimode typ db 97% 0.50 db Return loss singlemode 50 db Mating / un-mating sequences Push plug connector slightly into extension connector, rotate to find keying position, push connector to mate. Mated connector snaps in and is fully strain relieved. Pull coupling ring to un-mate. 10 HUBER+SUHNER FO connector harsh environment

11 Q-ODC outdoor connector plug / socket Type QA, QB, QC: Q-ODC plug Type QE, QF, QG: Q-ODC extension connector Type QS, QT, QU: Q-ODC socket square hole pattern Type QI, QJ, QM, QN socket hexagonal Type QS, QT, QU: Q-ODC socket square hole pattern HUBER+SUHNER FO connector harsh environment 11

12 Q-ODC outdoor connector plug / socket Overview of Q-ODC connector types Type Connector Dust cap QA push-on IP67 QC Q-ODC plug snap-on IP67 QB snap-on with chain IP67 QE push-on IP67 QF Q-ODC extension snap-on IP67 QG snap-on with chain IP67 QS push-on IP67 QT Q-ODC socket square snap-on IP67 QU snap-on with chain IP67 QI Q-ODC socket hexagonal, snap-on IP67 mounted from the rear, QJ simplex cable snap-on with chain IP67 QM Q-ODC socket hexagonal, snap-on IP67 mounted from the rear, field QN cable snap-on with chain IP67 Q-ODC push-pull connector for modular cell site installations Q-ODC is used by a growing number of operators who build a modular and flexible cell site cable infrastructure. The push-pull connectors allows for quick and reliable cable connections, e.g. for top-mast boxes or jumpers. Additionally, the interface is designed that it is either mated or unmated nothing in between. This makes each installation of cell site infrastructure safe. 12 HUBER+SUHNER FO connector harsh environment

13

14 Q-ODC -12 outdoor connector plug / socket Available Q4/2013 Features Up to 12 fibers, singlemode or multimode Compact design with MT ferrules Built-in socket with square flange/ hexagonal flange Extension connector for cable chaining Robust push-pull coupling mechanism two clearly defined mating states Highest outdoor installation safety Waterproof, dust proof and corrosion resistant Waterproof protection caps available RoHs compliant Specifications Technology plastic ferrule (PPS) Housing material nickel-plated brass Mating mechanism push-pull with two clearly defined states 500 N tensile load Q-ODC plug Mechanical performance 30 N static side load Q-ODC socket 30 N static side load Operating temperature 1) IEC C up to +85 C Mating durability IEC cycles 2) Ingress protection (mated) IEC IP68 Salt mist IEC days passed Vibration IEC passed Hz / 10 g Shock IEC IEC ) depending on cable type 2) with repeated cleaning passed 50 g passed category 1, 2 Optical performance MTP performance by fiber type/grade Fiber type/grade Typical IL (db) Maximum IL (db) Multimode Standard singlemode Low-loss singlemode (SM MT Elite) Low-loss multimode (MM MT Elite) HUBER+SUHNER FO connector harsh environment

15 Q-ODC -12 outdoor connector plug / socket Overview of Q-ODC connector types Connector Dust cap push-on IP67 Q-ODC 12 plug snap-on IP68 snap-on with chain IP68 push-on IP67 Q-ODC 12 extension snap-on IP68 snap-on with chain IP68 push-on IP67 Q-ODC 12 socket square snap-on IP68 snap-on with chain IP68 push-on IP67 Q-ODC 12 socket hexagonal, mounted from the rear snap-on IP68 snap-on with chain IP68 HUBER+SUHNER FO connector harsh environment 15

16 ODC -2 outdoor connector plug / socket Features 2 fibers, singlemode or multimode Compact design with 2 x 1.25 mm ferrules Built-in socket with square or hexagonal flange Extension connector for cable chaining Screwed locking mechanism Easy and safe installation Waterproof, dust proof and corrosion resistant Waterproof protection caps EMI protected RoHs compliant Full compatibility with previous version Fulfills performance standard IEC Cat. E Specifications Technology full ceramic ferrule and sleeve Housing material nickel-plated brass 800 N tensile load ODC-2 plug Mechanical performance 30 N static side load ODC-2 socket 30 N tensile load Installation torque force min. 1 Nm max. 2 Nm Operating temperature 1) IEC C up to + 85 C Mating durability 1000 cycles 2) Ingress protection (mated) IEC IP 68 Salt mist IEC days passed Vibration IEC passed Hz / 10g Shock IEC passed 100 g 1) depending on cable type 2) with repeated cleaning Optical performance Insertion loss singlemode typ db 97% 0.45 db IEC multimode typ db 97% 0.50 db Return loss singlemode 50 db 16 HUBER+SUHNER FO connector harsh environment

17 ODC -2 outdoor connector plug / socket Standard type A1, A4: ODC-2 plug Standard type E1, E3: ODC-2 extension NON-standard type C6, C8: ODC-2 socket square large hole pattern NON-standard type B8, B9: ODC-2 socket (previous version) hole pattern HUBER+SUHNER FO connector harsh environment 17

18 ODC -2 outdoor connector plug / socket Overview of ODC-2 connector types Type Connector Dust cap A1 A4 ODC-2 plug screwed cap with chain screwed cap with pulling feature E1 E3 ODC-2 extension (socket type) screwed cap screwed cap with chain C1 C3 ODC-2 socket, square small screwed cap screwed cap with chain B3 B4 ODC-2 socket, hexagonal, mounted from rear screwed cap screwed cap with chain Railway Q-ODC - switch The emergence of new applications onboard trains (CCTV, HD passenger information displays, in-train mobile coverage...) is pushing the need for signal bandwidth every day higher. Yesterday fast ethernet, today gigabit ehternet, tomorrow 10 gigabit ethernet. This opens new opportunities for the fiber otpic technology and leads to the emergence of a new generation of ethernet switches. The environmental requirements of the EN standard (electronic equipment used on rolling stock) are highly challenging. Beyond its high optical performances, the compliance of Q-ODC to the requirements of the IEC standard (railway applications - rolling stock equipment - shock and vibration tests) is a strong enabler for new gigabit optical switches to meet the requirements of the EN For this reason, Q-ODC is not only widely adopted by switch manufaturers specialised in the railway domain but is also a very compact and adequate solution for optical connections inside railway vehicles. 18 HUBER+SUHNER FO connector harsh environment

19

20 ODC -4 outdoor connector plug / socket Features 4 fibers, singlemode or multimode Compact design with 4 x 1.25 mm ferrules Built-in socket with square or hexagonal flange Extension connector for cable chaining Screwed locking mechanism Easy and safe installation Waterproof, dust proof and corrosion resistant Waterproof protection caps EMI protected RoHs compliant Full compatibility with previous version Fulfills performance standard IEC Cat. E Specifications Technology full ceramic ferrule and sleeve Housing material nickel-plated brass 800 N tensile load ODC-4 plug Mechanical performance 30 N static side load ODC-4 socket 30 N tensile load Installation torque force min. 1 Nm max. 2 Nm Operating temperature 1) IEC C up to + 85 C Mating durability 1000 cycles 2) Ingress protection (mated) IEC IP68 Salt mist IEC days passed Vibration IEC passed Hz / 10g Shock IEC passed 100 g 1) depending on cable type 2) with repeated cleaning Optical performance Insertion loss singlemode typ db 97% 0.45 db IEC multimode typ db 97% 0.50 db Return loss singlemode 50 db 20 HUBER+SUHNER FO connector harsh environment

21 ODC -4 outdoor connector plug / socket Type J2, J3: ODC-4 plug Type E4, E6: ODC-4 extension Standard type K2, K3: ODC-4 socket hexagonal hole pattern Standard type K6, K7: ODC-4 socket square small hole pattern HUBER+SUHNER FO connector harsh environment 21

22 ODC -4 outdoor connector plug / socket Overview of ODC-4 connector types Type Connector Dust cap J2 J3 ODC-4 plug screwed cap with pulling feature screwed cap with chain E4 E6 ODC-4 extension (socket type) screwed cap screwed cap with chain K2 K3 ODC-4 socket, hexagonal screwed cap screwed cap with chain K6 K7 ODC-4 socket, square small screwed cap screwed cap with chain HUBER+SUHNER cables are deployed on a global scale Year by year, HUBER+SUHNER produces tens of thousands of FTTA feeder cables and is a leading global supplier to major system vendors and operators. Our customers value our quality products which are manufactured on all continents close to the local markets. HUBER+SUHNER is also an innovation leader for remote radio interfaces and is the owner of globally successful products like ODC, Q-ODC and Q-XCO. 22 HUBER+SUHNER FO connector harsh environment

23 HUBER+SUHNER FO connector harsh environment 23

24 Q-XCO - quick-lock ruggedised SFP connector Features Quick-lock mating connector for remote radio head and industrial applications Ruggedised outdoor design with 2 x LC interface Plugs directly into SFP module, compatible with all standard SFP modules Full compensation of positioning tolerances and SFP module tolerances Bayonet, blind-mating mechanism and highest installation safety Full protection of optical interface during installation Access and exchange of SFP module possible RoHs compliant Mating mechanism Mating 1-step blind mating bayonet mating references visual and latch Compensation of positioning tolerances of SFP module z-axis ± 2.25 mm x, y-axis ± 0.4 mm (± 0.6 mm depending on SFP module) Latching of LC connector use of LC HQ technology automating latching and unlatching Mating durability IEC cycles Force on SFP module no force in mated state Specifications Technology LC full ceramic ferrules Housing material connector high-performance plastic socket die-casting with zinc plating Material flammability rating UL 94-V0 Mechanical performance IEC IEC IEC N tensile load 30 N static side load 180 cable torsion, passed operation, IEC C to +85 C Thermal performance installation 40 C to +55 C Ingress protection IEC IP67 (mated or with dust cap) Salt mist IEC , MIL-STD-202G Method 101E IEC h 720 h Vibration IEC , MIL-STD-202G, Method 204G passed 10 Hz 500 Hz / 10 g Shock IEC , MIL-STD-202G, Method 213B passed 50 g UV resistance ISO passed MJ/m 2 Optical performance singlemode typ db 97% 0.45 db Insertion loss multimode typ db 97% 0.50 db Return loss singlemode 50 db 24 HUBER+SUHNER FO connector harsh environment

25 Q-XCO - quick-lock ruggedised SFP connector Q-XCO plug Q-XCO flange small hole pattern Q-XCO flange large with asymmetric build-in dimension Description Picture Dust cap XA (for assembly code) Q-XCO connector Item no Q-XCO flange small Item no Q-XCO flange large Item no Q-XCO flange small e-coating HUBER+SUHNER FO connector harsh environment 25

26 Q-XCO quick-lock ruggedised SFP connector Installation safety for LTE and microwave links Q-XCO is the most installation safe fiber optic interface on the market. The connector is designed for harsh outdoor applications and for installation in challenging environments such as high up on radio masts under any atmos-pheric condition. Its "one-hand" blind mating performance in combination with full SFP tolerance compensation makes this connector the best in its class. For that reason, leading system vendors have chosen Q-XCO as the fiber optic interface for LTE remote radios and for state-of-the-art microwave backhaul systems simply to have better connections. Tolerance compensation ± 0.6 mm ± 2.25 mm The connector compensates for all tolerances of SFP modules and for mounting tolerances Exchange of SFP module Release and pull SFP module Mating sequence Rotate to find correct keying position Slide connector into flange and rotate 155 until snap-in position Connector mated with visual reference for correct installation 26 HUBER+SUHNER FO connector harsh environment

27 Q-XCO quick-lock ruggedised SFP connector SFP cage positioning specification Exclusion zone for connector mating HUBER+SUHNER FO connector harsh environment 27

28 XCO - ruggedised exchangeable SFP connector Features 2 fibers, singlemode or multimode Standard LC duplex interface Ruggedized outdoor connector for fiber-to-the-antenna and industrial applications Exchange and service of SFP module possible Easy manual installation no tool required High installation safety due to reliable snap-in strain relief system (patent pending) Waterproof protection cap with pulling eye EMI protected RoHs compliant Specifications Technology Housing material Mating mechanism LC with full ceramic ferrules nickel-plated brass snap-in strain relief system Mechanical performance 500 N tensile load 30 N static side load Operating temperature 1) 40 C up to +85 C Mating durability IEC cycles Ingress protection (mated) IEC IP67 Salt mist IEC days passed Vibration IEC passed 10 Hz 500 Hz / 10 g Shock IEC passed 50 g 1) depending on cable type Optical performance singlemode typ db 97% 0.45 db Insertion loss multimode typ db 97% 0.50 db Return loss singlemode 50 db Mating sequence Remove protection cap and slide back connector housing Snap connector into flange full strain relief Remove LC dust caps and plug LC duplex connectors into SFP module Screw-on housing to seal connector 28 HUBER+SUHNER FO connector harsh environment

29 XCO - ruggedised exchangeable SFP connector Type X1: XCO connector plug Type: XCO build-in flange hole pattern Type X1: XCO build-in flange (Ø 36 x 36) hole pattern Description Connector Dust cap X1 XCO connector IP68 Item number XCO build-in flange (36 x 34.5) IP68 Item number XCO build-in flange (36 x 36) IP68 Positioning dimensions of SFP module Front face of housing Top view PCB Cage Transceiver Lateral mounting tolerance between SFP module and XCO flange = ± 0.5 mm recommended 0.2 HUBER+SUHNER FO connector harsh environment 29

30 FullAXS ruggedised sealing system Features Ruggedised sealing system for fiber-to-the-antenna and industrial applications Open bulkhead for easy access to SFP Positive mechanical feedback to operator when fully mated Duplex LC interface Robust bayonet locking for easy, fast, and secure mating Waterproof (IP65), dust proof and corrosion resistant Expansion to RJ45 and power possible Specifications Mating mechanism bayonet style locking Housing material high performance plastic Technology LC with full ceramic ferrules Mechanical performance tensile load 150 N static side load 30 N Operating temperature 40 C to +70 C Mating durability IEC cycles Ingress protection (mated) IEC IP65 Vibration IEC passed 10 Hz 500 Hz / 10 g Performance standards IEC cat. E compliant Telcordia GR 3120 compliant 1) further cable types are available Optical performance singlemode typ db 97% 0.45 db Insertion loss multimode typ db 97% 0.50 db Return loss singlemode 50dB Item no. Connector Picture Dust cap Z4 FullAXS plug FullAXS build-in flange. FullAXS is a registered trademark of TE. 30 HUBER+SUHNER FO connector harsh environment

31 FullAXS ruggedised sealing system Type Z4: FullAXS plug Type : FullAXS build-in flange Type Z4: FullAXS plug (with cap) Type : FullAXS build-in flange (with cap) HUBER+SUHNER FO connector harsh environment 31

32 Hermaphroditic expanded beam connector EBC Features 2 or 4 fibers, singlemode or multimode Expanded beam system Screwed locking mechanism Easy cable chaining possible due to hermaphroditic connector design Waterproof and dust proof Low sensitivity of contamination of optical end faces Easy cleaning and no maintenance required Meets requirement of MIL-DTL-83526/20&21 Specifications Technology hermaphroditic expanded beam system Mechanical performance 1) 1500 N tensile load Free fall resistance 500 drops from 1.2 m height Operating temperature 1) 46 C to +85 C Storage temperature 1) 55 C to +85 C Mating durability min cycles Ingress protection (mated) IP67 1) depending on cable type Optical performance singlemode (1310 nm / 1550 nm) typ. 1.0 db, max. 2.0 db Insertion loss multimode (850 nm / 1300 nm ) typ. 0.8 db, max. 1.5 db Return loss singlemode typ. 30 db EBC plug EBC bulkhead hole pattern Ø 30.2 ± ± HUBER+SUHNER FO connector harsh environment

33 Hermaphroditic expanded beam connector EBC Ordering information 09Z02FG0 09Z04FG P1/P1 cable type fiber type connector left side/connector right side P1 P2 P5 P6 XX x total number of connectors x length of assembly [m] xx performance level (left/right) Q R mobile field cable with 2 fibers mobile field cable with 4 fibers singlemode E9/125 μm multimode G50/125 μm multimode G62.5/125 μm EBC plug/2 channels EBC plug/4 channels EBC bulkhead/2 channels EBC bulkhead/4 channels connector code of other connector typ (usually required for second side of bulkhead) multimode singlemode Please note: Other types of expanded beam connectors are available on request, also such types that meet MIL-DTL-83526/20, MIL-DTL-83526/21, VG and VG Mobile transport systems for EBC assemblies Plastic drum Metal drums Drums with backpack Size max. 400 m (Ø 5.6 mm) max m (Ø 5.6 mm) max. 700 m (Ø 5.6 mm) Colour black army green or other colours army green or other colours Sizes optional other sizes different types and sizes different types and sizes HUBER+SUHNER FO connector harsh environment 33

34 34 HUBER+SUHNER FO connector harsh environment

35 Table of content Cleaning of fiber optic connectors 36 Cleaning of ODC connectors 37 Cleaning of Q-XCO and FullAXS 38 Cleaning of Expanded Beam Connectors 39 Assembly code 40 Cable code definition for assemblies 41 Ordering information from other suppliers 42 Supplier information 42 HUBER+SUHNER FO connector harsh environment 35

36 Cleaning of fiber optic connectors General guidelines The optical performance (optical insertion loss and return loss) of fiber-optic connectors is easily and adversely affected by contamination and scratching of the ferrule surfaces. Particles of dust, smears of grease caused by touching the ferrules, or the residue from cleaning agents, can increase insertion losses and, in extreme cases, can culminate in loss of signal. During an installation it is therefore necessary to ensure that ferrule end surfaces are clean which means Stock fiber-optic assemblies only in original packaging Do not remove dust caps until immediately before mating Connectors should never left lying around without protective caps in place Never touch the end surfaces or 'wipe them down' and Always work very carefully and cleanliness is essential LC connectors tend to be much more prone to contamination and scratching than, for example, robust ODC or Q-ODC connectors on which the ferrules are protected me-chanically from physical contact. All quality manufacturers of fiber-optic assemblies conduct a 100% inspection of inser-tion losses and of the cleanliness of ferrule end face in an industrial environment gov-erned by controlled processes. Factory-terminated fiber-optic connectors supplied to the market are cleaned and are ready for direct installation. Do NOT CLEAN factory terminated connectors before FIRST installation! A misplaced intention to clean and inspect in the field with uncontrolled processes under usual installation conditions generally gives rise to contamination and to problems in the network. Various statistical investigations and many years of experience within the landline sector confirm this. Experience from many installations shows that contamination problems disappeared overnight when field cleaning work (before first mating) was ceased during installation work. Disregarding initial installation, field cleaning is however an important process and one that needs to be handled effectively by the installation teams. It can arise that ferrules get dirty during installation work (e.g. through physical contact) and in such cases, cleaning is urgently advised. During a network service or expansion, in many cases existing fiber-optic connections are disconnected and then get reconnected - here too, cleaning is advisable HUBER+SUHNER FO connector harsh environment

37 Cleaning of ODC connectors Q-ODC ODC-2 ODC mm ferrule 1.25 mm ferrule 1.25 mm ferrule Cleaning tools for ODC connectors Item no. Picture IBC cleaner for 1.25 mm ferrules Comments Same IBC cleaner of all types of ODC connectors Wet cleaning for ODC connectors not recommended Dry cleaning of endface ODC plug cleaning Remove the purple guide cap from the device Extend the tip of the cleaner approx. 1 2 mm and insert it into the plug straight forward Risk of tip breakage Push device up to the stop twice. A «click» sound indicates the end of each cleaning cycle ODC socket cleaning Open the guide cap from the device Insert the guide into the socket over the ferrule Push the device up to the stop stop twice. A «click» sound indicates the end of each cleaning cycle Identification of remaining cleaning yarn The window indicates if there is still cleaning yarn available. When the cleaning yarn is used up the indicator is completely red. Can be used for about 500 cleaning cycles HUBER+SUHNER FO connector harsh environment 37

38 Cleaning of Q-XCO and FullAXS Q-XCO XCO FullAXS LC with 1.25 mm ferrule LC with 1.25 mm ferrule LC with 1.25 mm ferrule Cleaning tools for dry cleaning Item no. Picture IBC cleaner for 1.25 mm ferrules Q-XCO cleaning Open the guide cap from the device and insert the LC ferrule into the guide Push the device up to the stop stop twice. A «click» sound indicates the end of each cleaning cycle FullAXS cleaning Open the guide cap from the device and insert the LC ferrule into the guide Push the device up to the stop stop twice. A «click» sound indicates the end of each cleaning cycle Ordering information from other suppliers Cleaning tools for EBC connectors Supplier Supplier item no. Large swab ITW Texwipe TX759B MicroAbsorbant TM Small swab ITW Texwipe TX770E MicroAbsorbant TM Isopropyl alcohol diverse - Electro-wash PX ITW Chemtronics ES810, ES1210 Supplier information Supplier ITW Texwipe Contact information Please check the supplier website for the local office at 38 HUBER+SUHNER FO connector harsh environment

39 Cleaning of Expanded Beam Connectors EBC with lenses Other types e.g. ProBeam Jr. EBC cleaning 1. Wash connector or front of bulkhead with mounted protective cap with fresh and clean water, if they are covered with excessive dirt. 2. IMPORTANT: Clean insert surfaces and lenses only when they are touched or otherwise contaminated. 3. Remove the protective cap. Turn grip of connector and protective cap in opposite directions, until threads are completely free. 4. Blow away dirt particles from the alignment pin, ball lenses and insert surface with clean dry air. 5. Moisten a large swab with isopropyl alcohol, electro-wash PX or equivalent. Using a back-and-forth or swirling motion, wipe the alignment pin, ball lenses, insert surface and mating surface. Use only light pressure on the ball lenses to avoid scratches. 6. If seal of grip or insert, connector threads, protective cap threads and front surfaces are dirty, then these should also be cleaned with a moistend large swab. Use again isopropyl alcohol, electro-wash PX or equivalent. 7. Moisten a small swab with isopropyl alcohol, electro-wash PX or equivalent. Using a back-and-forth or swirling motion, wipe the alignment pin hole. 8. Blow clean dry air over the lenses until remaining solvent and stray particles are removed. 9. Inspect the ball lenses to make sure any contamination is removed. If necessary, repeat steps 4 to 8 until the surfaces are clean. 10. Re-install the protective cap by turing grip of connector and protective cap in opposite directions and tighten them properly. HUBER+SUHNER FO connector harsh environment 39

40 Assembly code 27H01CD0 Description cable type see cable code definition (see next page) fiber type 09 singlemode 9/125 μm LB singlemode 9/125 low bend LE singlemode LEAF NZDS-fiber 50 multimode G50/125 μm 53 multimode G50/125 μm OM3 54 multimode G50/125 μm OM3+/OM4 62 multimode G62.5/125 μm 20 multimode H200/230 μm connector type 20/ connector left side 20 connector right side total number of connectors 1 1 connector (pigtail) 4 e.g.: duplex patchcord with 4 simplex connectors length of assembly 2.5 length in meters (ferrule tip to ferrule tip) optical performance level 1 st letter = connector left side 2 nd letter = connector right side A A singlemode LAN-eco APC B B singlemode high-end APC C C singlemode 0.1 db APC D D singlemode high-end UPC E E singlemode high power (APC/UPC) F F singlemode 0.1 db UPC M M multimode N N singlemode LAN-ECO UPC P P singlemode MT K no connector right side (pigtail) Connector code type Performance level x = upon request A B C D E F M N P 00 no connector 10 FSMA 20 ST-HQ 22 ST-Security 24 ST-LEAN 30 FCPC 33 FCPC APC wide key 34 FCPC APC small key 40 LSA 43 LSA APC 45 MU 50 MT-RJ without pins 51 MT-RJ with pins 70 SC x 73 SC APC 8 x 74 SC APC 9 x 77 SC duplex x Connector code type Performance level x = upon request A B C D E F M N 78 SC APC duplex x x 79 SC APC 9 duplex x x 80 LX.5 81 LX.5 duplex 83 LX.5 APC 84 LX.5 APC duplex 85 LC x 8P LC push-pull x 86 LC APC x 8Q LC APC push-pull x 8R LC duplex push-pull x 8S LC APC duplex push-pull x 90 LSH 93 LSH APC 97 LSH duplex 98 LSH APC duplex 40 HUBER+SUHNER FO connector harsh environment

41 Cable code definition for assemblies 09 A H T Y U Z X Description connector termination relevant diameter 0.9 mm for example, the following diameters are available: 0.6/ 0.9/ 1.7/ 1.8/ 1.9/ 2.0/ 2.1/ 2.4/ 2.6/ 2.7/ 3.0 mm cable jacket material no outer jacket (e.g. 0.9 mm tube only) LSFH PVC PE PUR-FR PUR other cable design 01 simplex, one fiber D8 duplex figure 8 (for LSFH and PVC only) D0 duplex figure 0?? number of fibers for multifiber cable with 2 fibers XX other secondary coating V V F F C CW D CH S SW T SH X other jacket / tube colour A red B green C blue D orange E yellow F white G black H grey I brown K violet (blue-purple) L pink M turquoise T transparent U nature X other fiber coating colour 0 not colored A red B green C blue D orange E yellow F white G black H grey I brown K violet (blue-purple) L pink M turquoise X other HUBER+SUHNER FO connector harsh environment 41

42 42 HUBER+SUHNER FO connector harsh environment

43 Additional catalogues Wireless infrastructure Item no Remote radio installation solutions Conventional cell site solution Remote radio installation Item no Best practice guide: How to install remote radio systems Fiber optic cables Item no Indoor cables Universal cables Outdoor cables Special cables Fiber optic cabling systems Item no Pre-terminated cabling systems MASTERLINE SMARTLINE Mobile cabling system

44 HUBER+SUHNER AG Fiber Optics Division Degersheimerstrasse Herisau Switzerland Phone Fax hubersuhner.com 4036/js/ HUBER+SUHNER is certified according to EN 9100, ISO 9001, ISO 14001, ISO/TS and IRIS. Waiver Fact and figures herein are for information only and do not represent any warranty of any kind.