Trilogy200. Proximal pressure line. Exhalation valve line. Quick start guide. Overview. Circuit set-up. Set-up screen. Prescription set-up

Transcription

1 Trilogy200 Proximal pressure line Exhalation valve line Quick start guide Overview Circuit set-up Set-up screen Prescription set-up

2 1 Overview 4 Porting block Detachable battery Air inlet and grey foam filter Removable air pathway Cancel action or exit menu menus or change settings Select/modify/confirm parameters Audio pause button Start/stop button AC power inlet SD card to download ventilation data Remote alarm connector Ethernet connector Serial connector to connect to a computer or Alice polysomnograph External battery connector Oxygen valve port (flow source up to 15 LPM) Symbols and icons Prescriber environment, full access mode SD card inserted in the ventilator Audio pause active Ramp active Access Card Detach Int Status of detachable battery Status of internal battery Status of external battery Battery is charging Ext Pause

3 2 Circuit set-up Before operating Trilogy200, you need to configure the circuit type. Passive exhalation port circuit Tracheostomy tubing Mask with integrated leak Mask without integrated leak Whisper Swivel II (exhalation port) Whisper Swivel II (exhalation port) Flexible tubing Bacterial/viral filter (optional) In the Set-up menu, select "Passive" for circuit type.

4 Active exhalation valve with proximal airway pressure circuit Tracheostomy tubing Mask without integrated leak Proximal pressure line Proximal pressure port Flexible tubing Exhalation valve Exhalation valve line Trilogy universal active PAP tube adapter Bacterial/viral filter (optional) In the Set-up menu, select "Active PAP" for circuit type.

5 Active exhalation valve flow sensor circuit Tracheostomy tubing Mask without integrated leak leak White striped flow line line Flow line line Flow sensor Exhalation valve Exhalation valve Exhalation valve line line Flexible tubing Porting block White striped flow line Bacterial/viral filter (optional) Flow line Exhalation valve line In the Set-up menu, select "Active flow" for circuit type.

6 3 Set-up screen Setting the circuit type Make sure Trilogy200 is turned off before taking the following steps A B Menu 1/10 Settings And Alarms Options Alarm log Event log Information Exit Select Press and hold and for a few seconds to access Set-up page C Menu Settings and Alarms 2/23 Circuit Type Passive Exit Modify Select Settings And Alarms D Menu Settings and Alarms 2/23 Circuit Type Active PAP Cancel Edit OK to Circuit Type and press Use to choose Active PAP, Active flow, or Passive and then press twice to confirm

7 Setting menu access To enable full access to the settings A Menu 1/10 B Settings And Alarms Options Alarm log Event log Information Exit Select Menu Access Detailed View Language Finish 1/18 Limited English Modify to Options and press Press to enter Menu Access C D Menu Access Detailed View Language Cancel Edit Full English OK 1/18 Menu Access Detailed View Language Finish 2/18 Full English Modify Use and press to choose Full or Limited Access to confirm Press and to return to Initial Screen E Press to begin therapy or continue navigating through the menu to set-up the ventilation parameters

8 4 Prescription set-up Primary: cm H2O cm H2O A 24/04/ :53 PM Menu B Menu Settings And Alarms Options Alarm log Exit Select 1/5 From main screen, press Menu Select Settings And Alarms E Tidal Volume IPAP Max Pressure Cancel Edit ON 400 ml 25.0 cmh20 OK F Tidal Volume IPAP Max Pressure Cancel Edit ON 400 ml 25.0 cmh20 OK Use to change the value or status of setting Press to validate new setting Menu Settings And Alarms ON ON Tidal Volume 400 ml IPAP Max Pressure 25.0 cmh20 Finish Modify Primary: CPAP 12/14/ :07 PM cm H2O RR 20BPM Vte 435ml Peak Flow 67.9l/min PIP 5.9 cm H2O Leak 21l/min MinVent 8.7l/min Menu Switch to Secondary Settings Safely Remove SD Card Primary Settings and Alarms Secondary Settings and Alarms Options Exit Select 3/8 If is enabled, both prescriptions need to be adjusted as previously explained Two prescriptions to set

9 C IPAP EPAP Finish 30.0 cmh cmh20 Modify D IPAP EPAP Finish 30.0 cmh cmh20 Modify Scroll up and down using to navigate through the settings and alarms G ON Tidal Volume 400 ml IPAP Max Pressure 25.0 cmh20 Finish Modify Press highlighted in blue to change the parameter Press and to return to the main screen

10 Philips Healthcare is part of Royal Philips Electronics How to reach us fax: Asia Europe, Middle East, Africa Latin America North America (toll free, US only) Philips Respironics 1010 Murry Ridge Lane Murrysville, PA Customer Service (toll free, US only) Respironics Asia Pacific Respironics Australia +61 (2) Respironics Deutschland Respironics Europe, Middle East, Africa Respironics France Respironics Italy Respironics Sweden Respironics Switzerland Respironics United Kingdom Please visit Respironics, Trilogy, Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates. All rights reserved Koninklijke Philips Electronics N.V. All rights are reserved. Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. Geyer WMB 11/09/09 MCI PN