C85E.pdf May 17,2016. Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors

Transcription

1 Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors

2 EU RoHS Compliant or r o ur 'Mur A ro c o ' -

3 Contents Product specifications are as of March 016. Part Numbering Safety Standard Certified Ceramic Capacitors p 1 1 Type KY (Basic Insulation) -Class X1, Y- (Recommend) Type KX New Small Size (Reinforced Insulation) -Class X1, Y1- (Recommend) p5 p8 Type KY/KX and Test Methods p11 AC50V Ceramic Capacitor Non Safety Certified Type DEJ Series (Based on the Electrical Appliance and Material Safety Law of Japan) DEJ Series and Test Methods Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) Safety Certified Ceramic Capacitors Packaging Safety Certified Ceramic Capacitors!Caution Safety Certified Ceramic Capacitors Notice High Voltage Ceramic Capacitors 4 DEH Series (15 C Guaranteed/Low-dissipation actor/dckv,.15kv) DEH Series and Test Methods 5 DEA Series (15 C Guaranteed/Class 1/DCk-.15kV) DEA Series and Test Methods 6 DEB Series (Class /DCk-.15kV) DEB Series and Test Methods 7 DEC Series (Class 1, /DC6.kV) DEC Series and Test Methods 8 DE Series (Only for LCD Backlight Inverter Circuit/6.kVp-p) DE Series and Test Methods High Voltage Ceramic Capacitors Characteristics Data (Typical Example) High Voltage Ceramic Capacitors Packaging High Voltage Ceramic Capacitors!Caution High Voltage Ceramic Capacitors Notice Safety Standard Certified Ceramic Capacitors for Automotive 9 Type KJ -Class X1, Y- (or Automotive Use/AC Line ilter of PHEV/EV Charger) Type KJ and Test Methods Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example) Safety Certified Ceramic Capacitors for Automotive Packaging Safety Certified Ceramic Capacitors for Automotive!Caution Safety Certified Ceramic Capacitors for Automotive Notice Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications p15 p16 p19 p1 p p6 p7 p9 p1 p p5 p7 p9 p41 p4 p45 p47 p48 p50 p55 p56 p57 p61 p6 p6 p66 p Please check the MURATA website ( if you cannot find a part number in this catalog.

4 o Part Numbering Safety Standard Certified Ceramic Capacitors (Part Number) DE 1 E KY M 6 N 7 A 8 9 : 1Product ID Series Category 7 Style Product ID Code Outline Contents 1 Safety Standard IEC Class X1, Y1 Certified IEC Class X1, Y DE -Products based on the J AC50V (r.m.s.) Electrical Appliance and Material Safety Law of Japan- or Electrical Appliance and Material Safety Law of Japan, the first three digits (1Product ID and Series Category) express "Series Name." or Safety Certified Capacitors, the first three digits express product code. The fourth figure expresses certified type shown in 4Safety Standard Certified Type column. Temperature Characteristics Code B E 1X Temperature Characteristics B E SL Cap. or Temp. Coeff. Temperature Range ±10% +0%, -55% -5 to +85 C +0%, -80% +50 to -1000ppm/ C +0 to +85 C Code A A A4 B/J B/J B4/J4 C D N N N4 P 8Packaging Code A B Style Vertical Crimp Long Vertical Crimp Short Straight Long Straight Short Vertical Crimp Taping Straight Taping Spacing Dimensions (mm) Diameter ø0.6±0.05 ø0.6±0.05 ø0.6±0.05 ø0.6±0.05 ø0.6±0.05 ø0.6±0.05 Packaging Ammo Pack Taping Bulk Pitch of Components Rated Voltage/Safety Standard Certified Type Code KX KY E Rated Voltage X1, Y1; AC50V (r.m.s.), AC00V (r.m.s.) (Safety Standard Certified Type KX) X1, Y; AC50V (r.m.s.), AC00V (r.m.s.) (Safety Standard Certified Type KY) AC50V (r.m.s.) 9Individual Specification Code or part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. :Halogen-free Compatible Product 5 Expressed by three figures. The unit is pico-farad (p). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. 6 Tolerance Code J K M Z Tolerance ±5% ±10% ±0% +80%, -0%

5 High Voltage Ceramic Capacitors (kv-6.kv) (Part Number) DE 1 B B D K 6 N 7 A 8 9 1Product ID Series Category 6 Tolerance Product ID DE The first three digits (1Product ID and Series Category) express "Series Name." Temperature Characteristics Code B E R D 1X C 4Rated Voltage Code D J LH Code A B C H Outline High Voltage Temperature Characteristics B E R D SL CH Cap. or Temp. Coeff. Contents Class 1 ( SL) DC-.15kV Rated Class DC-.15kV Rated Class 1, DC6.kV Rated LCD Backlight Inverter Circuit 6.kVp-p High Temperature Guaranteed, Low-dissipation actor ( R) DC-.15kV Rated Rated Voltage DCkV DC.15kV DC6.kV 6.kVp-p Temperature Range ±10% +0%, 55% 5 to +85 C +0%, 80% ±15% 5 to +85 C +15%, 0% +85 to +15 C +0%, 0% 5 to +15 C +50 to 1000ppm/ C +0 to +85 C 0±60ppm/ C +0 to +85 C Code C D J K Z 7 Style Code A A A4 B B/J B4 C1 C C4 CD D1 D DD N N N7 P P 8Packaging Code A B Style Vertical Crimp Long Vertical Crimp Short Straight Long Straight Short Vertical Crimp Taping Straight Taping Tolerance Spacing ±0.5p ±0.5p ±5% ±10% +80%, 0% Dimensions (mm) Diameter ø0.6±0.05 ø0.6±0.05 ø0.5±0.05 ø0.6±0.05 ø0.5±0.05 ø0.5±0.05 ø0.6±0.05 ø0.5±0.05 ø0.6±0.05 ø0.6±0.05 Packaging Ammo Pack Taping Bulk Pitch of Components Expressed by three figures. The unit is pico-farad (p). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. 9Individual Specification Code or part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics.

6 Safety Standard Certified Ceramic Capacitors for Automotive (Part Number) DE 1 6 E KJ M 6 N 7 A 8 9 1Product ID Series Category 7 Style Product ID DE The first three digits express product code. The fourth figure expresses certified type shown in 4Safety Standard Certified Type column. Temperature Characteristics Code B E 4Rated Voltage/Safety Standard Certified Type Code KJ Code 6 Outline Safety Standard Certified Contents Temperature Cap. Characteristics or Temp. Coeff. B E IEC Class X1, Y ±10% +0%, -55% Rated Voltage Temperature Range -5 to +85 C X1, Y; AC00V (r.m.s.) (Safety Standard Certified Type KJ) 5 Expressed by three figures. The unit is pico-farad (p). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. Code A B N 8Packaging Code A B Style Vertical Crimp Long Vertical Crimp Short Vertical Crimp Taping Spacing Dimensions (mm) Diameter 7.5 ø0.6±0.05 Packaging Ammo Pack Taping Bulk Pitch of Components 9Individual Specification Code or part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics Tolerance Code K M Tolerance ±10% ±0% 4

7 Safety Standard Certified Ceramic Capacitors Type KY (Basic Insulation) -Class X1, Y- (Recommend) 1 eatures D max. T max. 1. Compact size; diameter 5% less than Type KH.. Operating temperature range guaranteed up to 15 degrees C.. Dielectric strength: AC000V (for lead spacing =5mm) AC600V (for lead spacing =7.5mm) 4. Class X1/Y capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/IMKO/NEMKO/ ESTI/NSW/CQC. 5. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). We recommend a halogen-free product* as our standard item. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 6. Taping available for automatic insertion. 7. AC00V Rated Voltage item are newly added. Applications 1. Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters.. Ideal for use on D-A isolation and noise absorption for DAA modems without transformers. [Bulk] Vertical Crimp Long (A, A) [Bulk] Vertical Crimp Short (B, B) e ±1.0 Code 5.0 min..0 max. (in mm) Coating Extension e A, A Up to the end of crimp 0.6±0.05 D max. e ± ±1.0 T max. (in mm) Code Coating Extension e B, B Up to the end of crimp 0.6± max. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Standard Certification UL CSA VDE BSI SEMKO DEMKO IMKO NEMKO ESTI NSW Standard No. UL CSA E IEC EN EN (8.8, 14.) IEC EN IEC EN IEC AS50 Certified No. E KM D P Rated Voltage 50Vac (r.m.s.) CQC CQC GB/T1447 CQC UL CSA VDE BSI SEMKO DEMKO IMKO NEMKO ESTI NSW Standard No. UL CSA E IEC EN EN (8.8, 14.) IEC EN IEC EN IEC AS50 Certified No. E KM D P Rated Voltage 00Vac (r.m.s.) CQC CQC IEC CQC

8 Marking Example 47M KY50~ X1Y H 0D 8 4 Item 1 Type Designation KY Nominal (Under 100p: Actual value, 100p and over: digit system) Tolerance 4 Company Name Code 8: Made in Taiwan 15: Made in Thailand 5 Manufactured Date Code Class Code X1Y Rated Voltage Mark 50~, 00~ Halogen ree Mark H Rated Voltage 50Vac Spacing =7.5mm Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk Taping DE1XKY100JpppM0 50Vac(r.m.s.) SL 10p±5% 8.0mm max mm max. AB BB NA DE1XKY150JpppM0 50Vac(r.m.s.) SL 15p±5% 8.0mm max mm max. AB BB NA DE1XKY0JpppM0 50Vac(r.m.s.) SL p±5% 8.0mm max mm max. AB BB NA DE1XKY0JpppM0 50Vac(r.m.s.) SL p±5% 8.0mm max mm max. AB BB NA DE1XKY470JpppM0 50Vac(r.m.s.) SL 47p±5% 8.0mm max mm max. AB BB NA DE1XKY680JpppM0 50Vac(r.m.s.) SL 68p±5% 8.0mm max mm max. AB BB NA DEBKY101KpppM0 50Vac(r.m.s.) B 100p±10% 7.0mm max mm max. AB BB NA DEBKY151KpppM0 50Vac(r.m.s.) B 150p±10% 7.0mm max mm max. AB BB NA DEBKY1KpppM0 50Vac(r.m.s.) B 0p±10% 7.0mm max mm max. AB BB NA DEBKY1KpppM0 50Vac(r.m.s.) B 0p±10% 7.0mm max mm max. AB BB NA DEBKY471KpppM0 50Vac(r.m.s.) B 470p±10% 7.0mm max mm max. AB BB NA DEBKY681KpppM0 50Vac(r.m.s.) B 680p±10% 8.0mm max mm max. AB BB NA DEEKY10MpppM0 50Vac(r.m.s.) E 1000p±0% 7.0mm max mm max. AB BB NA DEEKY15MpppM0 50Vac(r.m.s.) E 1500p±0% 7.0mm max mm max. AB BB NA DEEKYMpppM0 50Vac(r.m.s.) E 00p±0% 8.0mm max mm max. AB BB NA DEEKYMpppM0 50Vac(r.m.s.) E 00p±0% 9.0mm max mm max. AB BB NA DEEKY47MpppM0 50Vac(r.m.s.) E 4700p±0% 10.0mm max mm max. AB BB NA DEKY10MpppM0 50Vac(r.m.s.) 10000p±0% 14.0mm max mm max. AB BB NA Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Individual specification code "M0" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC600V." Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 6 Spacing =5mm Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk Taping DE1XKY100JpppM01 50Vac(r.m.s.) SL 10p±5% 8.0mm max mm max. AB BB NA DE1XKY150JpppM01 50Vac(r.m.s.) SL 15p±5% 8.0mm max mm max. AB BB NA DE1XKY0JpppM01 50Vac(r.m.s.) SL p±5% 8.0mm max mm max. AB BB NA DE1XKY0JpppM01 50Vac(r.m.s.) SL p±5% 8.0mm max mm max. AB BB NA DE1XKY470JpppM01 50Vac(r.m.s.) SL 47p±5% 8.0mm max mm max. AB BB NA DE1XKY680JpppM01 50Vac(r.m.s.) SL 68p±5% 8.0mm max mm max. AB BB NA DEBKY101KpppM01 50Vac(r.m.s.) B 100p±10% 7.0mm max mm max. AB BB NA DEBKY151KpppM01 50Vac(r.m.s.) B 150p±10% 7.0mm max mm max. AB BB NA DEBKY1KpppM01 50Vac(r.m.s.) B 0p±10% 7.0mm max mm max. AB BB NA DEBKY1KpppM01 50Vac(r.m.s.) B 0p±10% 7.0mm max mm max. AB BB NA DEBKY471KpppM01 50Vac(r.m.s.) B 470p±10% 7.0mm max mm max. AB BB NA DEBKY681KpppM01 50Vac(r.m.s.) B 680p±10% 8.0mm max mm max. AB BB NA DEEKY10MpppM01 50Vac(r.m.s.) E 1000p±0% 7.0mm max mm max. AB BB NA Continued on the following page.

9 Continued from the preceding page. Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEEKY15MpppM01 50Vac(r.m.s.) E 1500p±0% 7.0mm max mm max. AB BB NA DEEKYMpppM01 50Vac(r.m.s.) E 00p±0% 8.0mm max mm max. AB BB NA DEEKYMpppM01 50Vac(r.m.s.) E 00p±0% 9.0mm max mm max. AB BB NA DEEKY47MpppM01 50Vac(r.m.s.) E 4700p±0% 10.0mm max mm max. AB BB NA Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC000V." Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. Taping 1 Rated Voltage 00Vac Spacing =7.5mm Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEBKY101KpppU0 00Vac(r.m.s.) B 100p±10% 7.0mm max mm max. AB BB NA DEBKY151KpppU0 00Vac(r.m.s.) B 150p±10% 7.0mm max mm max. AB BB NA DEBKY1KpppU0 00Vac(r.m.s.) B 0p±10% 7.0mm max mm max. AB BB NA DEBKY1KpppU0 00Vac(r.m.s.) B 0p±10% 7.0mm max mm max. AB BB NA DEBKY471KpppU0 00Vac(r.m.s.) B 470p±10% 7.0mm max mm max. AB BB NA DEBKY681KpppU0 00Vac(r.m.s.) B 680p±10% 8.0mm max mm max. AB BB NA DEEKY10MpppU0 00Vac(r.m.s.) E 1000p±0% 7.0mm max mm max. AB BB NA DEEKY15MpppU0 00Vac(r.m.s.) E 1500p±0% 7.0mm max mm max. AB BB NA DEEKYMpppU0 00Vac(r.m.s.) E 00p±0% 8.0mm max mm max. AB BB NA DEEKYMpppU0 00Vac(r.m.s.) E 00p±0% 9.0mm max mm max. AB BB NA DEEKY47MpppU0 00Vac(r.m.s.) E 4700p±0% 10.0mm max mm max. AB BB NA DEKY10MpppU0 00Vac(r.m.s.) 10000p±0% 14.0mm max mm max. AB BB NA Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Individual specification code "U0" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC600V." Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. Taping 7

10 Safety Standard Certified Ceramic Capacitors Type KX New Small Size (Reinforced Insulation) -Class X1, Y1- (Recommend) eatures 1. We design capacitors much more compact in size than current Type KX, having reduced the diameter by 0% max.. Operating temperature range guaranteed up to 15 degrees C.. Dielectric strength: AC4000V 4. Class X1/Y1 capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/IMKO/NEMKO/ ESTI/IMQ/CQC. 5. Can be use with a component in appliances requiring reinforced insulation and double insulation based on UL149, IEC60065 and IEC Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). We recommend a halogen-free product* as our standard item. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 7. Taping available for automatic insertion. 8. AC00V Rated Voltage item are newly added. Applications [Bulk] Vertical Crimp Long (A4) [Bulk] Vertical Crimp Short (B4) D max. e ±1.0 T max. 5.0 min..0 max. (in mm) Code Coating Extension e A4 Up to the end of crimp 0.6±0.05 D max. e ± ±1.0 T max. (in mm) Code Coating Extension e B4 Up to the end of crimp 0.6± max. 1. Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters.. Ideal for use on D-A isolation and noise absorption for DAA modems without transformers. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. *: Small sized Type KX differs from current Type KX in electrical characteristics, such as the voltage dependency, capacitance temperature dependency, and Dielectric strength. Therefore, before replacing current Type KX, please make a performance check by equipment. Please also refer to Notice (Rating) item, "Performance Check by Equipment," below. 8

11 Standard Certification Rated Voltage (AC50V) B, E UL CSA VDE BSI SEMKO DEMKO IMKO NEMKO ESTI IMQ CQC Standard No. UL CSA E IEC EN EN (8.8, 14.) IEC EN IEC EN EN GB/T1447 Certified No. E KM D P V4069 CQC CQC Marking Rated Voltage (AC50V) B, E 1 5 Example 47M KX50~ X1Y1 H 0D 8 4 Item 1 Type Designation KX Nominal ( digit system) Tolerance 4 Company Name Code 8: Made in Taiwan 15: Made in Thailand 5 Manufactured Date Code Class Code X1Y1 Rated Voltage Mark 50~ Halogen ree Mark H Standard Certification Rated Voltage (AC00V) B, E UL CSA VDE BSI SEMKO DEMKO IMKO NEMKO ESTI IMQ CQC Standard No. UL CSA E IEC EN EN (8.8, 14.) IEC EN IEC EN EN IEC Certified No. E KM D P V4069 CQC CQC Marking Rated Voltage (AC00V) B, E 1 5 Example 47M KX00~ X1Y1 H 0D 8 4 Item 1 Type Designation KX Nominal ( digit system) Tolerance 4 Company Name Code 8: Made in Taiwan 15: Made in Thailand 5 Manufactured Date Code Class Code X1Y1 Rated Voltage Mark 00~ Halogen ree Mark H Rated Voltage 50Vac Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk Taping DE1BKX101KpppN01 50Vac(r.m.s.) B 100p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX151KpppN01 50Vac(r.m.s.) B 150p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX1KpppN01 50Vac(r.m.s.) B 0p±10% 8.0mm max mm max. A4B B4B N4A DE1BKX1KpppN01 50Vac(r.m.s.) B 0p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX471KpppN01 50Vac(r.m.s.) B 470p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX681KpppN01 50Vac(r.m.s.) B 680p±10% 8.0mm max mm max. A4B B4B N4A DE1EKX10MpppN01 50Vac(r.m.s.) E 1000p±0% 7.0mm max mm max. A4B B4B N4A DE1EKX15MpppN01 50Vac(r.m.s.) E 1500p±0% 8.0mm max mm max. A4B B4B N4A DE1EKXMpppN01 50Vac(r.m.s.) E 00p±0% 9.0mm max mm max. A4B B4B N4A DE1EKXMpppN01 50Vac(r.m.s.) E 00p±0% 10.0mm max mm max. A4B B4B N4A DE1EKX47MpppN01 50Vac(r.m.s.) E 4700p±0% 1.0mm max mm max. A4B B4B N4A Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. Please contact us when less than 100p capacitance product is necessary. 9

12 Rated Voltage 00Vac Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DE1BKX101KpppP01 00Vac(r.m.s.) B 100p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX151KpppP01 00Vac(r.m.s.) B 150p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX1KpppP01 00Vac(r.m.s.) B 0p±10% 8.0mm max mm max. A4B B4B N4A DE1BKX1KpppP01 00Vac(r.m.s.) B 0p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX471KpppP01 00Vac(r.m.s.) B 470p±10% 7.0mm max mm max. A4B B4B N4A DE1BKX681KpppP01 00Vac(r.m.s.) B 680p±10% 8.0mm max mm max. A4B B4B N4A DE1EKX10MpppP01 00Vac(r.m.s.) E 1000p±0% 7.0mm max mm max. A4B B4B N4A DE1EKX15MpppP01 00Vac(r.m.s.) E 1500p±0% 8.0mm max mm max. A4B B4B N4A DE1EKXMpppP01 00Vac(r.m.s.) E 00p±0% 9.0mm max mm max. A4B B4B N4A DE1EKXMpppP01 00Vac(r.m.s.) E 00p±0% 10.0mm max mm max. A4B B4B N4A DE1EKX47MpppP01 00Vac(r.m.s.) E 4700p±0% 1.0mm max mm max. A4B B4B N4A Taping Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 10

13 Type KY/KX and Test Methods Operating Temperature Range: -40 to +15 C (Except for UL/VDE, -5 to +15 C) No. Item 1 and Dimensions Marking To be easily legible No visible defect, and dimensions are within specified range. Within specified tolerance Test Method The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. 4 Dissipation actor (D..) Q B, E SL D..< =.5% D..< = 5.0% Q> = 400+0C* 1 (C<0p) Q> = 1000 (C> = 0p) The capacitance, dissipation factor and Q should be measured at 0 C with 1±0.1kHz (char. SL: 1±0.1MHz) and AC5V(r.m.s.) max. 5 Insulation Resistance () 10000MΩ min. The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. The voltage should be applied to the capacitor through a resistor of 1MΩ. The capacitor should not be damaged when the test voltages from Table 1 are applied between the lead wires for 60 sec. Between Wires No failure Type KY KX <Table 1> Test Voltage or lead spacing =5mm AC000V(r.m.s.) or lead spacing =7.5mm AC600V(r.m.s.) AC4000V(r.m.s.) 6 Dielectric Strength Insulation No failure irst, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, a metal foil should be closely wrapped around the body of the capacitor to the distance of about to 6mm from each terminal. Then, the capacitor should be inserted into a container filled with metal balls of about 1mm diameter. inally, AC voltage from Table is applied for 60 sec. between the capacitor lead wires and metal balls. <Table > Type KY KX Test Voltage AC600V(r.m.s.) AC4000V(r.m.s.) Metal oil about to 6mm Metal Balls B E Within ±10% Within +0 55% 7 Temperature Characteristics Within +0 80% (Temp. range: -5 to +85 C) 8 Solderability of s * 1 "C" expresses nominal capacitance value (p). Temperature Coefficient SL +50 to -1000ppm/ C (Temp. range: +0 to +85 C) wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. The capacitance measurement should be made at each step specified in Table. Step <Table > Temperature (ºC) 0± -5± 0± 85± 0± The lead wire of a capacitor should be dipped into molten solder for ±0.5 sec. The depth of immersion is up to about 1.5 to.0mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C Continued on the following page. 11

14 Type KY/KX and Test Methods Continued from the preceding page. No Soldering Effect (On-Preheat) Item Soldering Effect (Non-Preheat) Dielectric Strength Dielectric Strength Within ±10% 1000MΩ min. Per Item 6 Within ±10% 1000MΩ min. Per Item 6 Test Method As shown in the figure, the lead wires should be immersed in solder Thermal Capacitor Screen of 50±10 C or 60±5 C up to to.0mm from the root of to.0mm terminal for.5±0.5 sec. (10±1 Molten sec. for 60±5 C). Solder Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 60+0/-5 C up to 1.5 to.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Thermal Screen Capacitor 1.5 to.0mm Molten Solder Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 11 Vibration Resistance D.. Q Within the specified tolerance B, E SL D..< =.5% D..< = 5.0% Q> = 400+0C* 1 (C<0p) Q> = 1000 (C> = 0p) The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. B E, SL Within ±10% Within ±15% Within ± 5% 1 Humidity (Under Steady State) D.. Q B, E SL D..< = 5.0% D..< = 7.5% Q> = 75+5/C* 1 (C<0p) Q> = 50 (C> = 0p) Set the capacitor for 500±1 hrs. at 40± C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* Dielectric Strength 000MΩ min. Per Item 6 B E, SL Within ±10% Within ±15% Within ± 5% 1 Humidity Loading D.. Q B, E SL D..< = 5.0% D..< = 7.5% Q> = 75+5/C* 1 (C<0p) Q> = 50 (C> = 0p) Apply the rated voltage for 500±1 hrs. at 40± C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* Dielectric Strength 000MΩ min. Per Item 6 * 1 "C" expresses nominal capacitance value (p). * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 1

15 Type KY/KX and Test Methods Continued from the preceding page. No. Item Test Method Within ±0% 000MΩ min. Impulse Voltage Each individual capacitor should be subjected to a 5kV (Type KX: 8kV) impulses for three times. Then the capacitors are applied to life test. 100 (%) ront time (T1) =1.μs=1.67T Time to half-value (T) =50μs 14 Life Dielectric Strength Per Item T T1 T t Apply a voltage from Table 4 for 1000 hrs. at 15+/-0 C, and relative humidity of 50% max. <Table 4> Applied Voltage 170% of Rated Voltage except that once each hour the voltage is increased to AC1000V(r.m.s.) for 0.1 sec. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 15 Robustness of Terminations Tensile Bending wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. W The capacitor should be individually wrapped in at least one but not more than two complete layers of cheesecloth. The capacitor should be subjected to 0 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for min. after the last discharge. S1 L1 L R Tr S C1 UAC L C C L4 Cx Ct Ut 16 Active lammability The cheesecloth should not be on fire. Oscilloscope C1, : 1μ±10% C : 0.0μ±5% 10kV L1 to 4 : 1.5mH±0% 16A Rod core choke Ct : μ±5% 10kV R : 100Ω±% Cx : Capacitor under test UAC : UR±5% : use, Rated 10A UR : Rated Voltage Ut : Voltage applied to Ct Ux 5kV time * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 1

16 Type KY/KX and Test Methods Continued from the preceding page. No. Item 17 Passive lammability The burning time should not exceed 0 sec. The tissue paper should not ignite. The capacitor under test should be held in the flame in the position that best promotes burning. Each specimen should only be exposed once to the flame. Time of exposure to flame: 0 sec. Length of flame : 1±1mm Gas burner : Length 5mm min. Inside Dia. 0.5±0.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. About 8mm 45 Test Method 00±5mm Test Specimen Tissue About 10mm Thick Board 18 Temperature and Immersion Cycle D.. Q Dielectric Strength B E, SL B, E SL 000MΩ min. Per Item 6 Within ±10% Within ±0% Within ± 5% D..< = 5.0% D..< = 7.5% Q> = 75+5/C* 1 (C<0p) Q> = 50 (C> = 0p) Step 1 4 * 1 "C" expresses nominal capacitance value (p). * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa The capacitor should be subjected to 5 temperature cycles, then consecutively to immersion cycles. Step 1 <Temperature Cycle> Temperature (ºC) -40+0/- Room temp. 15+/-0 Room temp. <Immersion Cycle> Time Temperature (ºC) (min) 65+5/-0 0± Time (min) 0 0 Cycle time: 5 cycles Immersion Water Clean water Salt water Cycle time: cycles Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* 14

17 AC50V Ceramic Capacitor Non Safety Certified Type DEJ Series (Based on the Electrical Appliance and Material Safety Law of Japan) eatures D max. <ig. 1> <ig. > T max. T max. 1. This type is based on the electrical appliance and material safety law of Japan (separated table 4).. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max.. Taping available for automatic insertion. [Bulk] Vertical Crimp Long (A) Straight Long (C) e ± min. Code Coating Extension e A Up to the end of crimp C.0 max..0 max. 5.0 min. (in mm) Style 0.6± ±0.05 ig. 1 ig. Applications Ideal for use on AC line filters and primary-secondary coupling for switching power supplies and AC adapters. D max. <ig. 1> <ig. > T max. T max. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. [Bulk] Vertical Crimp Short (B) Straight Short (D) e ± ±1.0.0 max. 5.0±1.0 Code Coating Extension e B Up to the end of crimp 0.6±0.05 D.0 max. 0.6±0.05 (in mm) Style ig. 1 ig. Marking Temp. E, Nominal Diameter ø7-8mm ø9-11mm 10Z 50~ 16 Z 50~ 16 Nominal Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code Marked with figures Marked with code Marked with code Marked with (omitted for nominal body diameter ø8mm and under) Abbreviation Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk Taping (1) Taping () DEJEE10Zppp 50Vac(r.m.s.) E 1000p+80/-0% 7.0mm max mm max. CB DB NA PA DEJEEZppp 50Vac(r.m.s.) E 00p+80/-0% 8.0mm max mm max. AB BB NA NA DEJEEZppp 50Vac(r.m.s.) E 00p+80/-0% 9.0mm max mm max. AB BB NA NA DEJEE47Zppp 50Vac(r.m.s.) E 4700p+80/-0% 11.0mm max mm max. AB BB NA NA DEJE47Zppp 50Vac(r.m.s.) 4700p+80/-0% 8.0mm max mm max. AB BB NA NA DEJE10Zppp 50Vac(r.m.s.) 10000p+80/-0% 11.0mm max mm max. AB BB NA NA Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Taping (1): spacing =5.0mm, Taping (): spacing =7.5mm. 15

18 DEJ Series and Test Methods Operating Temperature Range: -5 to +85 C No. Item 1 and Dimensions Marking To be easily legible No visible defect, and dimensions are within specified range. Within specified tolerance Test Method The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The capacitance should be measured at 0 C with 1±0.1kHz and AC5V(r.m.s.) max. 4 Dissipation actor (D..) E 5 Insulation Resistance () 10000MΩ min. D..< =.5% D..< = 5.0% The dissipation factor should be measured at 0 C with 1±0.1kHz and AC5V(r.m.s.) max. The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. Between Wires No failure The capacitor should not be damaged when AC1500V(r.m.s.) are applied between the lead wires for 60 sec. 6 Dielectric Strength Insulation No failure irst, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, the capacitor should be immersed into 10% salt solution up to a position of about to 4mm apart from the terminals. inally, AC1500V(r.m.s.) is applied for 60 sec. between the capacitor lead wires and electrode plate. About to 4mm Electrode Plate 10% Salt Solution The capacitance measurement should be made at each step specified in Table 1. <Table 1> 7 Temperature Characteristics E Within +0 55% Within +0 80% Step Temperature (ºC) 0± -5± 0± 85± 0± 1000MΩ min. As in igure 1, discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. R S R1 Vs Cd Ct R 8 Discharge Test Dielectric Strength Per Item 6 ig.1 Ct: Capacitor under test R: 100MΩ S: High-voltage switch R: Surge resistance R1: 1000Ω Cd Vs 0.001μ DC10kV 9 Solderability of s wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. The lead wire of a capacitor should be dipped into molten solder for ±0.5 sec. The depth of immersion is up to about 1.5 to.0mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C Continued on the following page. 16

19 DEJ Series and Test Methods Continued from the preceding page. No. Item Test Method Soldering Effect (Non-Preheat) Soldering Effect (On-Preheat) Dielectric Strength Dielectric Strength 1000MΩ min. Per Item MΩ min. Per Item 6 As shown in the figure, the lead wires should be immersed in solder of 50±10 C up to 1.5 to.0mm from the root of terminal for.5±0.5 sec. Pre-treatment: irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 60+0/-5 C up to 1.5 to.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Thermal Screen Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 Thermal Screen Capacitor 1.5 to.0mm Molten Solder Capacitor 1.5 to.0mm Molten Solder Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 1 Vibration Resistance D.. Within the specified tolerance E D..< =.5% D..< = 5.0% The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. 1 Solvent Resistance The capacitor should be immersed into a isopropyl alcohol for 0±5 sec. 14 Humidity (Under Steady State) D.. E E 1000MΩ min. Within ±0% Within ±0% D..< = 5.0% D..< = 7.5% Set the capacitor for 500±1 hrs. at 40± C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Dielectric Strength Per Item 6 15 Humidity Insulation D.. Dielectric Strength E E 1000MΩ min. Per Item 6 Within ±0% Within ±0% D..< = 5.0% D..< = 7.5% * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa The capacitor should be subjected to 40± C, relative humidity of 90 to 98% for 8 hrs., and then removed in room temperature for 16 hrs. until 5 cycles are completed. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Continued on the following page. 17

20 DEJ Series and Test Methods Continued from the preceding page. No. Item Test Method 16 Humidity Loading D.. Dielectric Strength E E 1000MΩ min. Per Item 6 Within ±0% Within ±0% D..< = 5.0% D..< = 7.5% Apply the rated voltage for 500±1 hrs. at 40± C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 17 Life Dielectric Strength E 1000MΩ min. Per Item 6 Within ±0% Within ±0% Apply a voltage from Table for 1500 hrs. at 85± C, relative humidity 50% max. <Table > Applied Voltage AC500V(r.m.s.), except that once each hour the voltage is increased to AC1000V(r.m.s.) for 0.1 sec. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 18 lame Test The capacitor flame discontinued as follows. Cycle 1 to Time (sec.) 15 max. 60 max. The capacitor should be subjected to applied flame for 15 sec. and then removed for 15 sec. until cycles are completed. Gas Burner: Inside Dia Capacitor lame 17 (in mm) 19 0 Robustness of Terminations Temperature and Immersion Cycle Tensile Bending D.. Dielectric Strength wire should not be cut off. Capacitor should not be broken. E E 1000MΩ min. Per Item 6 Within ±0% Within ±0% D..< = 5.0% D..< = 7.5% Step 1 4 * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa As shown in the figure at right, fix the body of the capacitor, apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be subjected to 5 temperature cycles, then consecutively to immersion cycles. Step 1 <Temperature Cycle> Temperature (ºC) -5+0/- Room temp. 85+/-0 Room temp. <Immersion Cycle> Time Temperature (ºC) (min) 65+5/-0 0± Time (min) 0 0 Cycle time: 5 cycles Immersion Water Clean water Salt water Cycle time: cycles Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 W 18

21 Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) - Temperature Characteristics 40 Cap. (%) SL B B SL E E Temperature ( C) Insertion Loss - requency Characteristics 0 Type KY 0 Type KX New Small Size Insertion Loss (db) (7) (6) (5) (4) () (1) () Insertion Loss (db) (6) (5) (4) () (1) () requency (MHz) Type KY Signal power: 1mW AC40V(r.m.s.) / 60Hz is applied on the capacitor. (1) DEBKY101KAB**** () DEBKY1KAB**** () DEBKY471KAB**** (4) DEEKY10MAB**** (5) DEEKYMAB**** (6) DEEKY47MAB**** (7) DEKY10MAB**** requency (MHz) Type KX New Small Size Signal power: 1mW AC40V(r.m.s.) / 60Hz is applied on the capacitor. (1) DE1BKX101KA4BN01 () DE1BKX1KA4BN01 () DE1BKX471KA4BN01 (4) DE1EKX10MA4BN01 (5) DE1EKXMA4BN01 (6) DE1EKX47MA4BN01 19

22 Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) Leakage Current Characteristics Type KY (B char.) AC voltage : 60Hz Temperature: 5 C Type KY (E, char.) AC voltage : 60Hz Temperature: 5 C Leakage current [ma(r.m.s.)] DEBKY471KAB**** DEBKY1KAB**** DEBKY101KAB**** AC voltage [V(r.m.s.)] Leakage current [ma(r.m.s.)] DEKY10MAB**** DEEKY47MAB**** DEEKYMAB**** DEEKY10MAB**** AC voltage [V(r.m.s.)] Leakage current [ma(r.m.s.)] Type KX New Small Size (B char.) AC voltage : 60Hz Temperature: 5 C DE1BKX471KA4BN01 DE1BKX1KA4BN01 DE1BKX101KA4BN AC voltage [V(r.m.s.)] Leakage current [ma(r.m.s.)] Type KX New Small Size (E char.) AC voltage : 60Hz Temperature: 5 C DE1EKX47MA4BN01 DE1EKXMA4BN01 DE1EKX10MA4BN AC voltage [V(r.m.s.)] 0

23 Safety Certified Ceramic Capacitors Packaging Taping 1.7mm pitch / lead spacing 5mm taping Vertical crimp type ( Code: N) P P D ΔS 15mm pitch / lead spacing 7.5mm taping Vertical crimp type ( Code: N) ΔS P P D L P1 e W W0 H0 W1 W L P1 e W0 W H0 W1 W P0 ød0 P0 ød0 15mm pitch / lead spacing 7.5mm taping Straight type ( Code: P) ΔS P P D e 0mm pitch / lead spacing 7.5mm taping Vertical crimp type ( Code: N7) P P D ΔS L P1 W0 W H W1 W L P1 e W H0 W0 W1 W P0 ød0 P0 ød0 L 5.4mm pitch / lead spacing 10.0mm taping Vertical crimp type ( Code: N4, N5) P1 P D ΔS e W W0 H0 W1 W Δh1 T max. Marked side * O Δh * H0.0 max. Code N, N, N4, N7 * Code P t * H0 Code N5 4.0 max. t1 P0 Item Pitch of component Pitch of sprocket hole spacing Length from hole center to component center Length from hole center to lead diameter Deviation along tape, left or right Carrier tape width Position of sprocket hole distance between reference and bottom planes Protrusion length Diameter of sprocket hole diameter Total tape thickness Total thickness, tape and lead wire thickness Portion to cut in case of defect Hold down tape width Hold down tape position Coating extension on lead Deviation across tape, front Deviation across tape, rear ød0 Code P P0 P P1 D ΔS W W1 H0 H ød0 t1 t T L W0 W e Δh1 Δh N N P N7 N4 N5 1.7± ±.0 0.0±.0 5.4±.0 1.7± ±1..85± ±0. 7.5± ±1.5.75± ± ± ±1.5 See the individual product specifications. 0±1.0 0± ± ± to ± ± Up to the end of crimp 1.0 max. 0.6± max. See the individual product specifications min. 1.5±1.5.0 max..0 max. Up to the end of crimp (in mm) Continued on the following page. 1

24 Safety Certified Ceramic Capacitors Packaging Continued from the preceding page. Packaging Styles Bulk Taping Polyethylene Bag Ammo Pack Minimum Quantity (Order in Sets Only) [Bulk] Type KY Type KX (New Small Size) DEJ Series Dia. D (mm) 7 8 to 11 1 to 14 15, 16 * Spacing =5.0mm (Code: A): 500pcs. Code Ap, Cp Long 50 * (pcs./bag) Code Bp, Dp Short [Taping] (pcs./ammo Pack) Code N N, P N4, N5, N7 Type KY Type KX (New Small Size) DEJ Series 1,000 1, ,

25 Safety Certified Ceramic Capacitors!Caution!Caution (Rating) 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p that contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage () Positional Measurement V0-p V0-p Vp-p Vp-p Vp-p. Operating Temperature and Self-generated Heat (Apply to B/E/ ) Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may have self-generated heat due to dielectric loss. Applied voltage load should be such that self-generated heat is within 0 C under the condition where the capacitor is subjected to an atmospheric temperature of 5 C. When measuring, use a thermocouple of small thermal capacity-k of ø0.1mm under conditions where the capacitor is not affected by radiant heat from other components or wind from surroundings. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.). Test Condition for Withstanding Voltage (1) Test Equipment Test equipment for AC withstanding voltage should be used with the performance of the wave similar to 50/60Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. Continued on the following page.

26 Safety Certified Ceramic Capacitors!Caution Continued from the preceding page. () Voltage Applied Method When the withstanding voltage is applied, the capacitor's lead or terminal should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, test voltage should be applied with the zero cross.* At the end of the test time, the test voltage should be reduced to near zero, and then capacitor's lead or terminal should be taken off the output of the withstanding voltage test equipment. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, the surge voltage may rise, and therefore, a defect may be caused. *ZERO CROSS is the point where voltage sine wave passes 0V. See the figure at right. 0V Voltage sine wave zero cross 4. ail-safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fuming. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 4

27 Safety Certified Ceramic Capacitors!Caution!Caution (Storage and Operating Condition) Operating and Storage Environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to moisture. Before cleaning, bonding, or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months after delivery. Check the solderability after 6 months or more. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED.!Caution (Soldering and Mounting) 1. Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment.. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specifications of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. Soldering the capacitor with a soldering iron should be performed in the following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time:.5 sec. max.. Bonding, Resin Molding and Coating or bonding, molding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the performance of the bonded, molded or coated product in the intended equipment. When the amount of applications, dryness/hardening conditions of adhesives and molding resins containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short circuit. The variation in thickness of adhesive, molding resin or coating may cause outer coating resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling. 4. Treatment after Bonding, Resin Molding and Coating When the outer coating is hot (over 100 degrees C.) after soldering, it becomes soft and fragile. Therefore, please be careful not to give it mechanical stress. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED.!Caution (Handling) Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 5

28 Safety Certified Ceramic Capacitors Notice Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity: Output of 0 watts per liter or less. Rinsing time: 5 min. maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. Notice (Rating) 1. of Capacitors (1) or SL char. might change a little depending on a surrounding temperature or an applied voltage. Please contact us if you use a strict constant time circuit. () or B/E/ char. Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a constant time circuit. Please contact us if you need detailed information.. Performance Check by Equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS (B/E/ char.) ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance, so the capacitance value may change depending on the operating condition in the equipment. Therefore, be sure to confirm the apparatus performance of receiving influence in the capacitance value change of a capacitor, such as leakage current and noise suppression characteristic. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed specific value by the inductance of the circuit. 6

29 High Voltage Ceramic Capacitors DEH Series (15 C Guaranteed/Low-dissipation actor/dckv,.15kv) <ig. 1> <ig. > eatures D max. T max. T max. 1. Reduced heat dissipation permitted due to small dielectric loss of the ceramic material.. Operating temperature range is guaranteed up to 15 degrees C.. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 4. Taping available for automatic insertion. [Bulk] Vertical Crimp Long (ig. 1) Straight Long (ig. ) e ± min..0 max. 5.0 min. (in mm) Code Coating Extension e Style A, A, A4 Up to the end of crimp 0.6±0.05 ig. 1 C.0 max. 0.6±0.05 ig. <ig. 1> <ig. > 4 Applications D max. T max. T max. Ideal for use on high-frequency pulse circuits such as a horizontal resonance circuit for CTV and snubber circuits for switching power supplies. e 5.0±1.0.0 max. 5.0±1.0 Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. [Bulk] Vertical Crimp Short (ig. 1) Straight Short (ig. ) ±0.8 Code Coating Extension e B, B, B4 Up to the end of crimp D.0 max. 0.6± ±0.05 (in mm) Style ig. 1 ig. Marking Nominal Diameter Rated Voltage Temp. DCkV,.15kV R ø7-9mm HR R 10K KV 66 ø10-1mm HR R 7K KV 66 High Temperature Guaranteed Code Temperature Characteristics Nominal Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code HR Marked with code (omitted for nominal body diameter ø6mm) Marked with figures Marked with code (omitted for nominal body diameter ø6mm) Marked with code (for DC.15kV, marked with KV) Marked with (omitted for nominal body diameter ø9mm and under) Abbreviation 7

30 DC-.15kV, R Characteristics 4 Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEHRD1Kppp 000Vdc 0p±10% 7.0mm max mm max. CB DB PA DEHRD71Kppp 000Vdc 70p±10% 7.0mm max mm max. CB DB PA DEHRD1Kppp 000Vdc 0p±10% 8.0mm max mm max. AB BB NA DEHRD91Kppp 000Vdc 90p±10% 8.0mm max mm max. AB BB NA DEHRD471Kppp 000Vdc 470p±10% 9.0mm max mm max. AB BB NA DEHRD561Kppp 000Vdc 560p±10% 9.0mm max mm max. AB BB NA DEHRD681Kppp 000Vdc 680p±10% 10.0mm max mm max. AB BB NA DEHRD81Kppp 000Vdc 80p±10% 11.0mm max mm max. AB BB NA DEHRD10Kppp 000Vdc 1000p±10% 1.0mm max mm max. AB BB NA DEHRD1Kppp 000Vdc 100p±10% 1.0mm max mm max. AB BB NA DEHRD15Kppp 000Vdc 1500p±10% 1.0mm max mm max. AB BB NA DEHRD18Kppp 000Vdc 1800p±10% 14.0mm max mm max. AB BB N7A DEHRDKppp 000Vdc 00p±10% 15.0mm max mm max. AB BB N7A DEHRD7Kppp 000Vdc 700p±10% 17.0mm max mm max. AB BB N7A DEHRDKppp 000Vdc 00p±10% 19.0mm max mm max. A4B B4B - DEHRD9Kppp 000Vdc 900p±10% 0.0mm max mm max. A4B B4B - DEHRD47Kppp 000Vdc 4700p±10% 1.0mm max mm max. A4B B4B - DEHR151Kppp 150Vdc 150p±10% 7.0mm max mm max. CB DB PA DEHR181Kppp 150Vdc 180p±10% 7.0mm max mm max. CB DB PA DEHR1Kppp 150Vdc 0p±10% 7.0mm max mm max. CB DB PA DEHR71Kppp 150Vdc 70p±10% 7.0mm max mm max. CB DB PA DEHR1Kppp 150Vdc 0p±10% 8.0mm max mm max. AB BB NA DEHR91Kppp 150Vdc 90p±10% 9.0mm max mm max. AB BB NA DEHR471Kppp 150Vdc 470p±10% 10.0mm max mm max. AB BB NA DEHR561Kppp 150Vdc 560p±10% 10.0mm max mm max. AB BB NA DEHR681Kppp 150Vdc 680p±10% 11.0mm max mm max. AB BB NA DEHR81Kppp 150Vdc 80p±10% 1.0mm max mm max. AB BB NA DEHR10Kppp 150Vdc 1000p±10% 1.0mm max mm max. AB BB NA DEHR1Kppp 150Vdc 100p±10% 14.0mm max mm max. AB BB N7A DEHR15Kppp 150Vdc 1500p±10% 15.0mm max mm max. AB BB N7A DEHR18Kppp 150Vdc 1800p±10% 16.0mm max mm max. AB BB N7A DEHRKppp 150Vdc 00p±10% 17.0mm max mm max. AB BB N7A DEHR7Kppp 150Vdc 700p±10% 19.0mm max mm max. A4B B4B - Taping Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 8

31 DEH Series and Test Methods No. Item Test Method 1 Operating Temperature Range -5 to +15 C and Dimensions 4 Dielectric Strength 5 Insulation Resistance () Between Wires Insulation Between Wires No visible defect, and dimensions are within specified range. Marking To be easily legible No failure No failure 10000MΩ min. 6 Within specified tolerance 7 Dissipation actor (D..) R: 0.% max. T. C. R Temp. -5 to +85 C +85 to +15 C Within ±15% Within +15/-0% The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 00% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge current< = 50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about mm off the metal balls as shown in the figure at right, and AC150V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge current< = 50mA) The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. The dissipation factor should be measured at 0 C with 1±0.kHz and AC5V(r.m.s.) max. About mm Metal balls The capacitance should be measured at 0 C with 1±0.kHz and AC5V(r.m.s.) max. The capacitance measurement should be made at each step specified in the Table. 4 8 Temperature Characteristics Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before measurements. Step Temp. ( C) 1 0± -5± 0± 4 15± 5 0± 9 Strength of 10 Vibration Resistance 11 Solderability of s 1 Soldering Effect (Non-Preheat) Pull Bending D.. Dielectric Strength (Between Wires) wire should not be cut off. Capacitor should not be broken. Within specified tolerance R: 0.% max. wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. Within ±10% Per item 4. *1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 10±1 sec. Each lead wire should be subjected to 5N (.5N for lead diameter 0.5mm) of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 5wt% rosin and then into molten solder for ±0.5 sec. In both cases the depth of dipping is up to about 1.5 to mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C The lead wire should be immersed into the melted solder of 50±10 C up to about 1.5 to mm from the main body for.5±0.5 sec. Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* Continued on the following page. W 9

32 DEH Series and Test Methods Continued from the preceding page. No. Item Test Method 1 Soldering Effect (On-Preheat) Dielectric Strength (Between Wires) Within ±10% Per item 4. irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 60+0/-5 C up to 1.5 to.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Thermal Screen Capacitor 1.5 to.0mm Molten Solder Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* 4 14 Temperature Cycle D.. Dielectric Strength (Between Wires) Within ±10% 0.4% max. 1000MΩ min. Per item 4. The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Step Temperature ( C) Time (min) 1 4-5± Room Temp. 15± Room Temp. 0 0 Cycle time: 5 cycles Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* 15 Humidity (Under Steady State) D.. Within ±10% 0.4% max. 1000MΩ min. Set the capacitor for /-0 hrs. at 40± C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 16 Humidity Loading D.. Within ±10% 0.6% max. 1000MΩ min. Apply the rated voltage for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. (Charge/Discharge current< = 50mA) Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 17 Life D.. Within ±10% 0.4% max. 000MΩ min. Apply a DC voltage of 150% of the rated voltage for /-0 hrs. at 15± C with a relative humidity of 50% max. (Charge/Discharge current< = 50mA) Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 0

33 High Voltage Ceramic Capacitors DEA Series (15 C Guaranteed/Class 1/DCk-.15kV) eatures D max. <ig. 1> <ig. > T max. T max. 1. Temperature compensating type ceramics realize lower heat dissipation than DEH series.. Operating temperature range is guaranteed up to 15 degrees C.. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 4. Taping available for automatic insertion. Applications [Bulk] Vertical Crimp Long (ig. 1) Straight Long (ig. ) e ± min..0 max. 5.0 min. (in mm) Code Coating Extension e Style A, A C1, CD C Up to the end of crimp.0 max..0 max. 0.6± ± ±0.05 ig. 1 ig. ig. <ig. 1> <ig. > D max. T max. T max. 1. Ideal for use as the ballast in backlighting inverters for liquid crystal display.. Ideal for use on high-frequency pulse circuits such as a horizontal resonance circuit for CTV and snubber circuits for switching power supplies. e ± ±1.0.0 max. 5.0±1.0 (in mm) 5 Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. [Bulk] Vertical Crimp Short (ig. 1) Straight Short (ig. ) Code Coating Extension e B, B Up to the end of crimp D1, DD.0 max. D.0 max. 0.6± ± ±0.05 Style ig. 1 ig. ig. Marking Nominal Diameter Temp. SL ø4.5-5mm 68 KV ø6mm 9 KV 66 ø7-9mm 181J KV 66 ø10-16mm 91J KV 66 Nominal Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code Under 100p: Actual value, 100p and over: Marked with figures Marked with code (omitted for nominal body diameter ø6mm and under) Marked with code (for DC.15kV, marked with KV) Marked with (omitted for nominal body diameter ø9mm and under) Abbreviation (omitted for nominal body diameter ø5mm and under) 1

34 SL Characteristics 5 Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEA1XD100Jppp 000Vdc 10p±5% 4.5mm max mm max. C1B D1B PA DEA1XD10Jppp 000Vdc 1p±5% 4.5mm max mm max. C1B D1B PA DEA1XD150Jppp 000Vdc 15p±5% 4.5mm max mm max. C1B D1B PA DEA1XD180Jppp 000Vdc 18p±5% 4.5mm max mm max. C1B D1B PA DEA1XD0Jppp 000Vdc p±5% 4.5mm max mm max. C1B D1B PA DEA1XD70Jppp 000Vdc 7p±5% 4.5mm max mm max. C1B D1B PA DEA1XD0Jppp 000Vdc p±5% 4.5mm max mm max. C1B D1B PA DEA1XD90Jppp 000Vdc 9p±5% 5.0mm max mm max. C1B D1B PA DEA1XD470Jppp 000Vdc 47p±5% 6.0mm max mm max. AB BB NA DEA1XD560Jppp 000Vdc 56p±5% 6.0mm max mm max. AB BB NA DEA1XD680Jppp 000Vdc 68p±5% 6.0mm max mm max. AB BB NA DEA1XD80Jppp 000Vdc 8p±5% 7.0mm max mm max. AB BB NA DEA1XD101Jppp 000Vdc 100p±5% 7.0mm max mm max. AB BB NA DEA1XD11Jppp 000Vdc 10p±5% 8.0mm max mm max. AB BB NA DEA1XD151Jppp 000Vdc 150p±5% 8.0mm max mm max. AB BB NA DEA1XD181Jppp 000Vdc 180p±5% 9.0mm max mm max. AB BB NA DEA1XD1Jppp 000Vdc 0p±5% 10.0mm max mm max. AB BB NA DEA1XD71Jppp 000Vdc 70p±5% 11.0mm max mm max. AB BB NA DEA1XD1Jppp 000Vdc 0p±5% 1.0mm max mm max. AB BB NA DEA1XD91Jppp 000Vdc 90p±5% 1.0mm max mm max. AB BB NA DEA1XD471Jppp 000Vdc 470p±5% 14.0mm max mm max. AB BB N7A DEA1XD561Jppp 000Vdc 560p±5% 15.0mm max mm max. AB BB N7A DEA1X100Jppp 150Vdc 10p±5% 5.0mm max mm max. CDB DDB PA DEA1X10Jppp 150Vdc 1p±5% 5.0mm max mm max. CDB DDB PA DEA1X150Jppp 150Vdc 15p±5% 5.0mm max mm max. CDB DDB PA DEA1X180Jppp 150Vdc 18p±5% 5.0mm max mm max. CDB DDB PA DEA1X0Jppp 150Vdc p±5% 5.0mm max mm max. CDB DDB PA DEA1X70Jppp 150Vdc 7p±5% 6.0mm max mm max. CB DB PA DEA1X0Jppp 150Vdc p±5% 6.0mm max mm max. CB DB PA DEA1X90Jppp 150Vdc 9p±5% 6.0mm max mm max. CB DB PA DEA1X470Jppp 150Vdc 47p±5% 7.0mm max mm max. CB DB PA DEA1X560Jppp 150Vdc 56p±5% 7.0mm max mm max. CB DB PA DEA1X680Jppp 150Vdc 68p±5% 8.0mm max mm max. AB BB NA DEA1X80Jppp 150Vdc 8p±5% 8.0mm max mm max. AB BB NA DEA1X101Jppp 150Vdc 100p±5% 9.0mm max mm max. AB BB NA DEA1X11Jppp 150Vdc 10p±5% 10.0mm max mm max. AB BB NA DEA1X151Jppp 150Vdc 150p±5% 11.0mm max mm max. AB BB NA DEA1X181Jppp 150Vdc 180p±5% 11.0mm max mm max. AB BB NA DEA1X1Jppp 150Vdc 0p±5% 1.0mm max mm max. AB BB NA DEA1X71Jppp 150Vdc 70p±5% 14.0mm max mm max. AB BB N7A DEA1X1Jppp 150Vdc 0p±5% 15.0mm max mm max. AB BB N7A DEA1X91Jppp 150Vdc 90p±5% 16.0mm max mm max. AB BB N7A Taping Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

35 DEA Series and Test Methods No. Item Test Method 1 Operating Temperature Range -5 to +15 C and Dimensions 4 Dielectric Strength 5 Insulation Resistance () 7 Q Between Wires Insulation Between Wires 8 Temperature Characteristics No visible defect, and dimensions are within specified range. Marking To be easily legible No failure No failure 10000MΩ min. 6 Within specified tolerance 400+0C* min. (0p under) 1000 min. (0p min.) +50 to -1000ppm/ C (Temp. range: +0 to +85 C) Step 1 Temp. ( C) 0± The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 00% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentv50ma) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about mm off the metal balls as shown in the figure at right, and AC150V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentv50ma) The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. The Q should be measured at 0 C with 1±0.MHz and AC5V(r.m.s.) max. The capacitance measurement should be made at each step specified in the Table. -5± 0± 4 85± 5 0± About mm Metal balls The capacitance should be measured at 0 C with 1±0.MHz and AC5V(r.m.s.) max. 5 9 Strength of 10 Vibration Resistance 11 Solderability of s 1 Soldering Effect (Non-Preheat) Pull Bending Q Dielectric Strength (Between Wires) wire should not be cut off. Capacitor should not be broken. Within specified tolerance 400+0C* min. (0p under) 1000 min. (0p min.) wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. Within ±.5% Per item 4. * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa * "C" expresses nominal capacitance value (p). As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 10±1 sec. Each lead wire should be subjected to 5N (.5N for lead diameter 0.5mm) of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 5wt% rosin and then into molten solder for ±0.5 sec. In both cases the depth of dipping is up to about 1.5 to mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C The lead wire should be immersed into the melted solder of 50±10 C ( of ø5mm and under: 70±5 C) up to about 1.5 to mm from the main body for.5±0.5 sec. ( of ø5mm and under: 5±0.5 sec.) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Continued on the following page. W

36 DEA Series and Test Methods Continued from the preceding page. No. Item Test Method Soldering Effect (On-Preheat) 14 Temperature Cycle Humidity (Under Steady State) 16 Humidity Loading 17 Life Dielectric Strength (Between Wires) Q Dielectric Strength (Between Wires) Q Q Q Within ±.5% Per item 4. Within ±5% 75+5/C* min. (0p under) 50 min. (0p min.) 1000MΩ min. Per item 4. Within ±5% 75+5/C* min. (0p under) 50 min. (0p min.) 1000MΩ min. Within ±5% 75+5/C* min. (0p under) 50 min. (0p min.) 1000MΩ min. Within ±% 75+5/C* min. (0p under) 50 min. (0p min.) 000MΩ min. irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Thermal Screen Capacitor 1.5 Then, as in the figure, the lead to.0mm wires should be immersed in Molten solder of 60+0/-5 C up to 1.5 Solder to.0mm from the root of terminal for 7.5+0/-1 sec. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Step 1 4 * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa * "C" expresses nominal capacitance value (p). Temperature ( C) -5± Room Temp. 15± Room Temp. Time (min) 0 0 Cycle time: 5 cycles Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Set the capacitor for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Apply the rated voltage for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. (Charge/Discharge current< = 50mA) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Apply a DC voltage of 150% of the rated voltage for /-0 hrs. at 15± C with a relative humidity of 50% max. (Charge/Discharge current< = 50mA) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 4

37 High Voltage Ceramic Capacitors DEB Series (Class /DCk-.15kV) eatures D max. <ig. 1> <ig. > T max. T max. 1. Small size and high capacitance. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max.. Taping available for automatic insertion. Applications [Bulk] Vertical Crimp Long (ig. 1) Straight Long (ig. ) e ± min. Code Coating Extension e A, A Up to the end of crimp C1, CD.0 max. C.0 max..0 max. 5.0 min. (in mm) Style 0.6± ± ±0.05 ig. 1 ig. ig. Ideal for use on decoupling circuits for power supplies. <ig. 1> <ig. > D max. T max. T max. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. e ± ±1.0 Code Coating Extension e.0 max. 5.0±1.0 (in mm) Style [Bulk] Vertical Crimp Short (ig. 1) Straight Short (ig. ) B, B D1, DD D Up to the end of crimp.0 max..0 max. 0.6± ± ±0.05 ig. 1 ig. ig. 6 Marking Nominal Diameter Temp. B E ø4.5-5mm 1 KV 10 KV ø6mm 1 KV KV 66 ø7-9mm 10K KV 66 10Z KV 66 47Z KV 66 ø10-16mm B K KV 66 E 47Z KV 66 10Z KV 66 Temperature Characteristics Nominal Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code Marked with code for char. B and E (omitted for nominal body diameter ø9mm and under) Marked with figures Marked with code (omitted for nominal body diameter ø6mm and under) Marked with code (for DC.15kV, marked with KV) Marked with (omitted for nominal body diameter ø9mm and under) Abbreviation (omitted for nominal body diameter ø5mm and under) 5

38 B Characteristics Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEBBD101Kppp 000Vdc 100p±10% 4.5mm max mm max. C1B D1B PA DEBBD151Kppp 000Vdc 150p±10% 4.5mm max mm max. C1B D1B PA DEBBD1Kppp 000Vdc 0p±10% 4.5mm max mm max. C1B D1B PA DEBBD1Kppp 000Vdc 0p±10% 5.0mm max mm max. C1B D1B PA DEBBD471Kppp 000Vdc 470p±10% 6.0mm max mm max. AB BB NA DEBBD681Kppp 000Vdc 680p±10% 7.0mm max mm max. AB BB NA DEBBD10Kppp 000Vdc 1000p±10% 8.0mm max mm max. AB BB NA DEBBD15Kppp 000Vdc 1500p±10% 9.0mm max mm max. AB BB NA DEBBDKppp 000Vdc 00p±10% 10.0mm max mm max. AB BB NA DEBBDKppp 000Vdc 00p±10% 1.0mm max mm max. AB BB NA DEBBD47Kppp 000Vdc 4700p±10% 15.0mm max mm max. AB BB N7A DEBB101Kppp 150Vdc 100p±10% 5.0mm max mm max. CDB DDB PA DEBB151Kppp 150Vdc 150p±10% 5.0mm max mm max. CDB DDB PA DEBB1Kppp 150Vdc 0p±10% 5.0mm max mm max. CDB DDB PA DEBB1Kppp 150Vdc 0p±10% 6.0mm max mm max. CB DB PA DEBB471Kppp 150Vdc 470p±10% 7.0mm max mm max. CB DB PA DEBB681Kppp 150Vdc 680p±10% 8.0mm max mm max. AB BB NA DEBB10Kppp 150Vdc 1000p±10% 9.0mm max mm max. AB BB NA DEBB15Kppp 150Vdc 1500p±10% 11.0mm max mm max. AB BB NA DEBBKppp 150Vdc 00p±10% 1.0mm max mm max. AB BB NA DEBBKppp 150Vdc 00p±10% 15.0mm max mm max. AB BB N7A Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. Taping 6 E Characteristics Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEBED10Zppp 000Vdc 1000p+80/-0% 6.0mm max mm max. AB BB NA DEBEDZppp 000Vdc 00p+80/-0% 8.0mm max mm max. AB BB NA DEBED47Zppp 000Vdc 4700p+80/-0% 11.0mm max mm max. AB BB NA DEBED10Zppp 000Vdc 10000p+80/-0% 16.0mm max mm max. AB BB N7A DEBE10Zppp 150Vdc 1000p+80/-0% 7.0mm max mm max. CB DB PA DEBEZppp 150Vdc 00p+80/-0% 10.0mm max mm max. AB BB NA DEBE47Zppp 150Vdc 4700p+80/-0% 1.0mm max mm max. AB BB NA Taping Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. Characteristics Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DEBD10Zppp 000Vdc 1000p+80/-0% 5.0mm max mm max. C1B D1B PA DEBDZppp 000Vdc 00p+80/-0% 7.0mm max mm max. AB BB NA DEBD47Zppp 000Vdc 4700p+80/-0% 9.0mm max mm max. AB BB NA DEBD10Zppp 000Vdc 10000p+80/-0% 1.0mm max mm max. AB BB NA Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. Taping 6

39 DEB Series and Test Methods No. Item Test Method 1 Operating Temperature Range -5 to +85 C and Dimensions 4 Dielectric Strength 5 Insulation Resistance () 7 Dissipation actor (D..) 9 Strength of 10 Vibration Resistance 11 Solderability of s 1 Soldering Effect (Non-Preheat) Between Wires Insulation Between Wires 8 Temperature Characteristics Pull Bending D.. Dielectric Strength (Between Wires) No visible defect, and dimensions are within specified range. Marking To be easily legible No failure No failure 10000MΩ min. 6 Within specified tolerance B, E:.5% max. : 5.0% max. B: Within ±10% E: Within +0/-55% : Within +0/-80% Within specified tolerance B, E:.5% max. : 5.0% max. B: Within ±5% E: Within ±15% : Within ±0% Per item 4. room condition* for 4± hrs. before measurements. Step Temp. ( C) 1 0± -5± 0± 4 85± wire should not be cut off. Capacitor should not be broken. wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 00% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge current< = 50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about mm off the metal balls as shown in the figure at right, and DC voltage of 1.kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge current< = 50mA) The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. 5 0± As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 10±1 sec. W About mm Metal balls The capacitance should be measured at 0 C with 1±0.kHz and AC5V(r.m.s.) max. The dissipation factor should be measured at 0 C with 1±0.kHz and AC5V(r.m.s.) max. The capacitance measurement should be made at each step specified in the Table. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at Each lead wire should be subjected to 5N (.5N for lead diameter 0.5mm) of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 5wt% rosin and then into molten solder for ±0.5 sec. In both cases the depth of dipping is up to about 1.5 to mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C The lead wire should be immersed into the melted solder of 50±10 C ( of ø5mm and under: 70±5 C) up to about 1.5 to mm from the main body for.5±0.5 sec. ( of ø5mm and under: 5±0.5 sec.) Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* Continued on the following page. 6 7

40 DEB Series and Test Methods Continued from the preceding page. No. Item Test Method Soldering Effect (On-Preheat) Temperature and Immersion Cycle Humidity (Under Steady State) 16 Humidity Loading 17 Life Dielectric Strength (Between Wires) D.. Dielectric Strength (Between Wires) D.. D.. D.. B: Within ±5% E: Within ±15% : Within ±0% Per item 4. B: Within ±10% E: Within ±0% : Within ±0% B, E: 4.0% max. : 7.5% max. 000MΩ min. Per item 4. B: Within ±10% E: Within ±0% : Within ±0% B, E: 5.0% max. : 7.5% max. 1000MΩ min. B: Within ±10% E: Within ±0% : Within ±0% B, E: 5.0% max. : 7.5% max. 500MΩ min. B: Within ±10% E: Within ±0% : Within ±0% B, E: 4.0% max. : 7.5% max. 000MΩ min. irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 60+0/-5 C up to 1.5 to.0mm from the root of terminal for 7.5+0/-1 sec. * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Thermal Screen Capacitor 1.5 to.0mm Molten Solder Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* The capacitor should be subjected to 5 temperature cycles, then consecutively to immersion cycles. <Temperature Cycle> Step Temperature ( C) Time (min) 1 4-5± Room Temp. 85± Room Temp. 0 0 Cycle time: 5 cycles <Immersion Cycle> Step Temperature ( C) Time (min) Immersion Water /-0 0± Clean water Salt water Cycle time : cycles Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* Set the capacitor for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* Apply the rated voltage for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. (Charge/Discharge current< = 50mA) Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. Apply a DC voltage of 150% of the rated voltage for /-0 hrs. at 85± C with a relative humidity of 50% max. (Charge/Discharge current< = 50mA) Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* for 4± hrs. 8

41 High Voltage Ceramic Capacitors DEC Series (Class 1, /DC6.kV) eatures D max. <ig. 1> T max. <ig. > T max. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. e ± min. 4.0 max. 5.0 min. (in mm) Applications 1. Ideal for use as the ballast in backlighting inverters for liquid crystal displays (SL ).. Ideal for use on high voltage circuits such as Cockcroft circuits (B ). [Bulk] Vertical Crimp Long (ig. 1) Straight Long (ig. ) Code Coating Extension e A Up to the end of crimp C4.0 max. 0.6± ±0.05 Style ig. 1 ig. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Marking Nominal Diameter Temp. SL B E ø7mm 10J 6KV 7 ø8-9mm 47J 6KV 66 1K 6KV 66 ø10-15mm 151J 6KV 66 B 10K 6KV 66 Z 6KV 66 Temperature Characteristics Nominal Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code Marked with code for char. B (omitted for nominal body diameter ø9mm and under) Under 100p: Actual value, 100p and over: Marked with figures Marked with code Marked with code (for DC6.kV, marked with 6KV) Marked with (omitted for nominal body diameter ø9mm and under) Abbreviation (omitted for nominal body diameter ø7mm) 9

42 SL Characteristics Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T DEC1XJ100JABMS1 600Vdc 10p±5% 7.0mm max mm max. DEC1XJ100JC4BMS1 600Vdc 10p±5% 7.0mm max mm max. DEC1XJ10JAB 600Vdc 1p±5% 8.0mm max mm max. DEC1XJ10JC4B 600Vdc 1p±5% 8.0mm max mm max. DEC1XJ150JAB 600Vdc 15p±5% 8.0mm max mm max. DEC1XJ150JC4B 600Vdc 15p±5% 8.0mm max mm max. DEC1XJ180JAB 600Vdc 18p±5% 9.0mm max mm max. DEC1XJ180JC4B 600Vdc 18p±5% 9.0mm max mm max. DEC1XJ0JAB 600Vdc p±5% 9.0mm max mm max. DEC1XJ0JC4B 600Vdc p±5% 9.0mm max mm max. DEC1XJ70JAB 600Vdc 7p±5% 9.0mm max mm max. DEC1XJ70JC4B 600Vdc 7p±5% 9.0mm max mm max. DEC1XJ0JAB 600Vdc p±5% 9.0mm max mm max. DEC1XJ0JC4B 600Vdc p±5% 9.0mm max mm max. DEC1XJ90JAB 600Vdc 9p±5% 9.0mm max mm max. DEC1XJ90JC4B 600Vdc 9p±5% 9.0mm max mm max. DEC1XJ470JAB 600Vdc 47p±5% 9.0mm max mm max. DEC1XJ470JC4B 600Vdc 47p±5% 9.0mm max mm max. DEC1XJ560JC4B 600Vdc 56p±5% 10.0mm max mm max. DEC1XJ680JC4B 600Vdc 68p±5% 1.0mm max mm max. DEC1XJ80JC4B 600Vdc 8p±5% 1.0mm max mm max. DEC1XJ101JC4B 600Vdc 100p±5% 1.0mm max mm max. DEC1XJ11JC4B 600Vdc 10p±5% 14.0mm max mm max. DEC1XJ151JC4B 600Vdc 150p±5% 15.0mm max mm max. B Characteristics 7 Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T DECBJ101KC4B 600Vdc 100p±10% 9.0mm max mm max. DECBJ151KC4B 600Vdc 150p±10% 9.0mm max mm max. DECBJ1KC4B 600Vdc 0p±10% 9.0mm max mm max. DECBJ1KC4B 600Vdc 0p±10% 9.0mm max mm max. DECBJ471KC4B 600Vdc 470p±10% 10.0mm max mm max. DECBJ681KC4B 600Vdc 680p±10% 11.0mm max mm max. DECBJ10KC4B 600Vdc 1000p±10% 1.0mm max mm max. E Characteristics Part Number DC Rated Voltage Dia. D Spacing (mm) Thickness T DECEJ10ZC4B 600Vdc 1000p+80/-0% 11.0mm max mm max. DECEJZC4B 600Vdc 00p+80/-0% 15.0mm max mm max. 40

43 DEC Series and Test Methods No. Item Test Method 1 Operating Temperature Range -5 to +85 C and Dimensions 4 Dielectric Strength 5 Insulation Resistance () Between Wires Insulation Between Wires 8 Temperature Characteristics No visible defect, and dimensions are within specified range. Marking To be easily legible No failure No failure 10000MΩ min. 6 Within specified tolerance 7 Q SL: 400+0C* min. (0p under) 1000 min. (0p min.) Dissipation actor (D..) B, E:.5% max. SL: +50 to -1000ppm/ C (Temp. range: +0 to +85 C) B: Within ±10% E: Within +0/-55% Step Temp. ( C) 1 0± The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 00% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge current< = 50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about mm off the metal balls as shown in the figure at right, and DC voltage of 1.kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge current< = 50mA) The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. The capacitance measurement should be made at each step specified in the Table. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before measurements. ( B, E) -5± 0± 4 85± 5 0± About mm Metal balls The capacitance should be measured at 0 C with 1±0.kHz ( SL: 1±0.MHz) and AC5V(r.m.s.) max. The dissipation factor and Q should be measured at 0 C with 1±0.kHz ( SL: 1±0.MHz) and AC5V(r.m.s.) max. 9 Strength of 10 Vibration Resistance 11 Solderability of s 1 Soldering Effect (Non-Preheat) Pull Bending Q D.. Dielectric Strength (Between Wires) wire should not be cut off. Capacitor should not be broken. Within specified tolerance SL: 400+0C* min. (0p under) 1000 min. (0p min.) B, E:.5% max. wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. SL: Within ±.5% B: Within ±5% E: Within ±15% Per item 4. * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa * "C" expresses nominal capacitance value (p). As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 5wt% rosin and then into molten solder for ±0.5 sec. In both cases the depth of dipping is up to about 1.5 to mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C The lead wire should be immersed into the melted solder of 50±10 C up to about 1.5 to mm from the main body for.5±0.5 sec. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. ( B, E) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 ( SL) Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 ( B, E) Continued on the following page. W 7 41

44 DEC Series and Test Methods Continued from the preceding page. No. Item Test Method Soldering Effect (On-Preheat) Temperature and Immersion Cycle Humidity (Under Steady State) 16 Humidity Loading 17 Life Dielectric Strength (Between Wires) Q D.. Dielectric Strength (Between Wires) Q D.. Q D.. Q D.. SL: Within ±.5% B: Within ±5% E: Within ±15% Per item 4. SL: Within ±% B: Within ±10% E: Within ±0% SL: 75+5/C* min. (0p under) 50 min. (0p min.) B, E: 4.0% max. 000MΩ min. Per item 4. SL: Within ±5% B: Within ±10% E: Within ±0% SL: 75+5/C* min. (0p under) 50 min. (0p min.) B, E: 5.0% max. 1000MΩ min. SL: Within ±7.5% B: Within ±10% E: Within ±0% SL: /C* min. (0p under) 00 min. (0p min.) B, E: 5.0% max. 500MΩ min. SL: Within ±% B: Within ±10% E: Within ±0% SL: 75+5/C* min. (0p under) 50 min. (0p min.) B, E: 4.0% max. 000MΩ min. irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 60+0/-5 C up to 1.5 to.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. ( B, E) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 ( SL) Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 ( B, E) The capacitor should be subjected to 5 temperature cycles, then consecutively to immersion cycles. <Temperature Cycle> Step Temperature ( C) Time (min) 1-5± 0 Room Temp. 85± 0 4 Room Temp. Cycle time: 5 cycles <Immersion Cycle> Step 1 Temperature ( C) 65+5/-0 0± * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa * "C" expresses nominal capacitance value (p). Thermal Screen Time (min) 15 Capacitor Immersion Water Clean water 15 Salt water Cycle time: cycles 1.5 to.0mm Molten Solder Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. ( B, E) Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* 1 Set the capacitor for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. ( B, E) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Apply the rated voltage for 500+4/-0 hrs. at 40± C in 90 to 95% relative humidity. (Charge/Discharge current< = 50mA.) Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. ( B, E) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 ( SL) Post-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. ( B, E) Apply a DC voltage of 150% of the rated voltage for /-0 hrs. at 85± C with a relative humidity of 50% max. (Charge/Discharge current< = 50mA.) Pre-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. before initial measurements. ( B, E) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 ( SL) Post-treatment: Capacitor should be stored at 85± C for 1 hr., then placed at room condition* 1 for 4± hrs. ( B, E) 4

45 High Voltage Ceramic Capacitors DE Series (Only for LCD Backlight Inverter Circuit/6.kVp-p) eatures D max. T max. 1. Compact size: Diameter is 0% less than DEC series.. Low self-heating at high frequency and high voltage due to low dielectric loss of the ceramic material.. Operating temperature range is guaranteed up to 105 degrees C. 4. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 5. Taping available for automatic insertion. [Bulk] Vertical Crimp Long (A) e ± min. Code Coating Extension e A Up to the end of crimp D max. T max. 4.0 max. (in mm) 0.6±0.05 Applications Ideal for use in LCD backlight inverters. e max. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. [Bulk] Vertical Crimp Short (J) Code J ±0.8.5± Coating Extension e Up to the end of crimp (in mm) 0.6±0.05 Marking Nominal Diameter Temp. CH SL ø7-9mm 10J 6K~ 66 J 6K~ 66 Temperature Characteristics Nominal Tolerance Rated Voltage Manufactured Date Code Upper horizontal line Actual value Marked with code Marked with code (Marked with 6K~) Abbreviation 8 SL Characteristics Part Number Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk Taping DE1XLH100Jppp 600Vdc(p-p) 10p±5% 7.0mm max mm max. AB JB NA DE1XLH10Jppp 600Vdc(p-p) 1p±5% 7.0mm max mm max. AB JB NA DE1XLH150Jppp 600Vdc(p-p) 15p±5% 7.0mm max mm max. AB JB NA DE1XLH180Jppp 600Vdc(p-p) 18p±5% 7.0mm max mm max. AB JB NA DE1XLH0Jppp 600Vdc(p-p) p±5% 7.0mm max mm max. AB JB NA DE1XLH70Jppp 600Vdc(p-p) 7p±5% 8.0mm max mm max. AB JB NA DE1XLH0Jppp 600Vdc(p-p) p±5% 9.0mm max mm max. AB JB NA DE1XLH90Jppp 600Vdc(p-p) 9p±5% 9.0mm max mm max. AB JB NA DE1XLH470Jppp 600Vdc(p-p) 47p±5% 9.0mm max mm max. AB JB NA Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 4

46 CH Characteristics Part Number Rated Voltage Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk DECLH00Cppp 600Vdc(p-p).0p±0.5p 7.0mm max mm max. AB JB NA DECLH00Cppp 600Vdc(p-p).0p±0.5p 7.0mm max mm max. AB JB NA DECLH040Cppp 600Vdc(p-p) 4.0p±0.5p 7.0mm max mm max. AB JB NA DECLH050Dppp 600Vdc(p-p) 5.0p±0.5p 7.0mm max mm max. AB JB NA DECLH060Dppp 600Vdc(p-p) 6.0p±0.5p 7.0mm max mm max. AB JB NA DECLH070Dppp 600Vdc(p-p) 7.0p±0.5p 8.0mm max mm max. AB JB NA DECLH080Dppp 600Vdc(p-p) 8.0p±0.5p 8.0mm max mm max. AB JB NA DECLH090Dppp 600Vdc(p-p) 9.0p±0.5p 8.0mm max mm max. AB JB NA DECLH100Jppp 600Vdc(p-p) 10p±5% 8.0mm max mm max. AB JB NA Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. Taping 8 44

47 DE Series and Test Methods No. Item Test Method 1 Operating Temperature Range -5 to +105 C and Dimensions 4 Dielectric Strength 5 Insulation Resistance () 7 Q Between Wires Insulation Between Wires 8 Temperature Characteristics No visible defect, and dimensions are within specified range. Marking To be easily legible No failure No failure 10000MΩ min. 6 Within specified tolerance 400+0C* min. (0p under) 1000 min. (0p min.) CH: 0±60ppm/ C SL: +50 to -1000ppm/ C (Temp. range: +0 to +85 C) Step Temp. ( C) 1 0± The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The capacitor should not be damaged when DC1.6kV is applied between the lead wires for 1 to 5 sec. (Charge/Discharge current< = 50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about.0mm off the metal balls as shown in the figure at right, and DC voltage of 1.kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge current< = 50mA) The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. The Q should be measured at 0 C with 1±0.MHz and AC5V(r.m.s.) max. The capacitance measurement should be made at each step specified in the Table. -5± 0± 4 85± 5 0± About.0mm Metal balls The capacitance should be measured at 0 C with 1±0.MHz and AC5V(r.m.s.) max. 9 Strength of 10 Vibration Resistance 11 Solderability of s 1 Soldering Effect (Non-Preheat) Pull Bending Q Dielectric Strength (Between Wires) wire should not be cut off. Capacitor should not be broken. Within specified tolerance 400+0C* min. (0p under) 1000 min. (0p min.) wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. Within ±.5% Per item 4. * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa * "C" expresses nominal capacitance value (p). As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., hrs. each in mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 5wt% rosin and then into molten solder for ±0.5 sec. In both cases the depth of dipping is up to about 1.5 to.0mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C The lead wire should be immersed into the melted solder of 50±10 C up to about 1.5 to.0mm from the main body for.5±0.5 sec. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Continued on the following page. W 8 45

48 DE Series and Test Methods Continued from the preceding page. No. Item Test Method 1 Soldering Effect (On-Preheat) Dielectric Strength (Between Wires) Within ±.5% Per item 4. irst the capacitor should be stored at 10+0/-5 C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 60+0/-5 C up to 1.5 to.0mm from the root of terminal for 7.5+0/-1 sec. Thermal Screen Capacitor 1.5 to.0mm Molten Solder Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 14 Temperature and Immersion Cycle Q Dielectric Strength (Between Wires) Within ±% 00+10C* min. (10p under) 75+5/C* min. (10p min. and 0p under) 50 min. (0p min.) 000MΩ min. Per item 4. The capacitor should be subjected to 5 temperature cycles, then consecutively to immersion cycles. <Temperature Cycle> Step 1 4 <Immersion Cycle> Step 1 Temperature ( C) 65+5/-0 0± Temperature ( C) -5± Room Temp. 105± Room Temp. Cycle time: 5 cycles Time (min) Time (min) 0 0 Immersion Water Clean water Salt water Cycle time: cycles Post-treatment: Capacitor should be stored for 4 to 4 hrs. at room condition.* Humidity (Under Steady State) 16 Life Q Q Within ±5% 00+10C* min. (10p under) 75+5/C* min. (10p min. and 0p under) 50 min. (0p min.) 1000MΩ min. Within ±% 00+10C* min. (10p under) 75+5/C* min. (10p min. and 0p under) 50 min. (0p min.) 000MΩ min. * 1 "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa * "C" expresses nominal capacitance value (p). Set the capacitor for /-0 hrs. at 40± C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 Apply 6.kVp-p at the frequency in the Table for /-0 hrs. at 105± C with a relative humidity of 50% max. (Charge/Discharge current< = 50mA.) <requency> (p) to 10 1 to 7 to 47 requency (khz) Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* 1 46

49 High Voltage Ceramic Capacitors Characteristics Data (Typical Example) - Temperature Characteristics Cap. (%) CH, SL, B, E, char SL 0 CH CH B SL -10 B E -50 E Temp. ( C) Cap. (%) D C R C, D, R char Temperature ( C) R C D - DC Bias Characteristics 0 DESDA471KAB Cap. (%) DEA1XD1JAB DEHRD10KAB -80 DEBBD10KAB DEBEDZAB DC Bias (V) 47

50 High Voltage Ceramic Capacitors Packaging Taping 15.0mm pitch / lead spacing 7.5mm taping Straight type ( Code: P) 15.0mm pitch / lead spacing 7.5mm taping Vertical crimp type ( Code: N) P P D ΔS P P D ΔS L P1 W0 W H W1 W L P1 e W0 W H0 W1 W P0 ød0 P0 ød0 0.0mm pitch / lead spacing 7.5mm taping Vertical crimp type ( Code: N7) P P D ΔS 1.7mm pitch / lead spacing 5.0mm taping Straight type ( Code: P) P P D ΔS L P1 e W0 W H0 W1 W L P1 e W0 W H W1 W e P0 ød0 P0 ød0 L 1.7mm pitch / lead spacing 5.0mm taping Vertical crimp type ( Code: N) P P D ΔS P1 e W0 W H0 W1 W Δh1 T max. Marked side * O Δh * Code N, N, N7.0 max. H0 * Code N 4.0 max. H0 * Code P, P t t1 P0 ød0 Except DE Series DE Series Item Pitch of component Pitch of sprocket hole spacing Length from hole center to component center Length from hole center to lead diameter Deviation along tape, left or right Carrier tape width Position of sprocket hole distance between reference and bottom planes Protrusion length Diameter of sprocket hole diameter Total tape thickness Total thickness, tape and lead wire thickness Portion to cut in case of defect Hold down tape width Hold down tape position Coating extension on lead Deviation across tape, front Deviation across tape, rear Code P P0 P P1 D ΔS W W1 H H0 ød0 t1 t T L W0 W e Δh1 Δh P N N7 P N 15.0±.0 0.0±.0 1.7± ±0. 7.5± ±1.5.75± ± ±1..85±0.7 See the individual product specifications. 0±.0 0± ± ± to ± ± ± max. See the individual product specifications min. 1.5±1.5.0 max. (Vertical crimp type: Up to the end of crimp).0 max. 1.0 max. (in : mm) 48 Continued on the following page.

51 High Voltage Ceramic Capacitors Packaging Continued from the preceding page. Packaging Styles Bulk Taping Polyethylene Bag Ammo Pack Minimum Quantity (Order in Sets Only) [Bulk] DEH Series DEA Series DEB Series DEC Series DE Series Dia. D (mm) 4.5 to to , to to 1 7 to 9 10, 11 1 to 15 *1 Spacing =5.0mm (Code: A): 500pcs. Code Ap, Cp Long * (pcs./bag) Code Bp, Dp, Jp Short [Taping] (pcs./ammo Pack) Code N, P N, P N7 DEH Series DEA Series DEB Series DE Series 1,500 1,500 1,

52 High Voltage Ceramic Capacitors!Caution!Caution (Rating) <DEH/DEA/DEB/DEC Series> 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p that contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. When using the low-dissipation DEA (SL ) /DEC (SL ) /DEH (R ) series in a high- frequency and high-voltage circuit, be sure to read the instructions in item 4. When DC-rated capacitors are to be used in input circuits from commercial power source (AC filter), be sure to use Safety Certified Capacitors because various regulations on withstand voltage or impulse withstand established for each type of equipment should be taken into consideration. Voltage DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage () Positional Measurement V0-p V0-p Vp-p Vp-p Vp-p. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. The frequency of the applied sine wave voltage should be less than 00kHz. The applied voltage load (*) should be such that the capacitor's self-generated heat is within 0 C in an atmospheric temperature of 5 C. When measuring, use a thermocouple of small thermal capacity-k of ø0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) *Before using the low-dissipation DEA/DEC (SL ) /DEH series, be sure to read the instructions in item 4.. ail-safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could follow an electric shock, fire or fume. Continued on the following page. 50

53 High Voltage Ceramic Capacitors!Caution Continued from the preceding page. 4. Load Reduction and Self-generated Heat During Application of High-frequency and High-voltage Due to the low self-heating characteristics of lowdissipation capacitors, the allowable electric power of these capacitors is generally much higher than that of B characteristic capacitors. However, if the self-heating temperature is 0 C under a high-frequency voltage whose peak-to-peak value equals the capacitor's rated voltage, the capacitor's power consumption may exceed its allowable electric power. Therefore, when using the DEA/DEC (SL ) /DEH series in a high-frequency and high-voltage circuit with a frequency of 1kHz or higher, make sure that the Vp-p values including the DC bias, do not exceed the applied voltage value specified in Table 1. Also make sure that the self-heating temperature (the difference between the capacitor's surface temperature and the capacitor's ambient temperature) at an ambient temperature of 5 C does not exceed the value specified in Table 1. As shown in ig., the self-heating temperature depends on the ambient temperature. Therefore, if you are not able to set the ambient temperature to approximately 5 C, please <ig. 1> Relationship Between Applied Voltage and Self-heating Temperature (Allowable Self-heating Temp. at 5 C Ambient Temp.) DEH Series R (Rated Voltage: DCkV to.15kv) Allowable Self-heating Temp. ( C) kv.15kv Applied Voltage (Vp-p) <ig. > Dependence of Self-heating Temperature on Ambient Temperature 5 DEH Series R (Rated Voltage: DCkV to.15kv) contact our sales representatives or product engineers. We are offering free software, The Capacitor Selection Tool: by Voltage orm, which will assist you in selecting a suitable capacitor. The software can be downloaded from Murata's Web site ( mmcsv/index.html). By inputting capacitance values and applied voltage waveform of the specific capacitor series, this software will calculate the capacitor's power consumption and list suitable capacitors. When the result of this software is different from the measurement result of the self-heating temperature on your side, please contact our sales representatives or product engineers. AILURE TO OLLOW THE ABOVE CAUTIONS (ITEMS 1 TO 4) MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. <Table 1> Allowable Conditions at High frequency Allowable Conditions Series DC at High-frequency * Capacitor's Temp. Rated Ambient Voltage Applied Self-heating Temp. Temp. * Voltage (Max.) (5 C Ambient Temp.) *1 DEH R kv 1400Vp-p 0 C Max. 000Vp-p 5 C Max..15kV 1600Vp-p 0 C Max. 150Vp-p 5 C Max. -5 to +85 C DEA SL kv 000Vp-p.15kV 150Vp-p 5 C Max. DEC SL 6.kV 600Vp-p 5 C Max. *1 ig. 1 shows the relationship between the applied voltage and the allowable self- heating temperature regarding to.15kv rated voltage of the DEH series R characteristic. * When the ambient temperature is 85 to 15 C, the applied voltage needs to be further reduced. If the DEA/DEH series needs to be used at an ambient temperature of 85 to 15 C, please contact our sales representatives or product engineers. * ig. shows reference data on the allowable voltage - frequency characteristics for a sine wave voltage. DEA/DEC Series SL (Rated Voltage: DCkV to 6.kV) 0 Self-heating Temperature ( C) Self-heating Temperature ( C) (5) Ambient Temperature ( C) 0 0 0(5) Ambient Temperature ( C) Continued on the following page. 51

54 High Voltage Ceramic Capacitors!Caution Continued from the preceding page. <ig. > Allowable Voltage (Sine Wave Voltage) - requency Characteristics (At Ambient Temperature of 85 C or less) Because of the influence of harmonics, when the applied voltage is a rectangular wave or pulse wave voltage (instead of a sine wave voltage), the heat generated by the capacitor is higher than the value obtained by application of the sine wave with the same fundamental frequency. Roughly calculated for reference, the allowable voltage for a rectangular wave or pulse wave corresponds approximately to the allowable voltage for a sine wave whose fundamental frequency is twice as large as that of the rectangular wave or pulse wave. This allowable voltage, however, varies depending on the voltage and current waveforms. Therefore, you are requested to make sure that the selfheating temperature is not higher than the value specified in Table DEH Series R (Rated Voltage: DCkV) DEH Series R (Rated Voltage: DC.15kV) Allowable Voltage (Vp-p) p 470p 1000p 00p 4700p Allowable Voltage (Vp-p) (150) p 470p 1000p 00p requency (khz) requency (khz) DEA Series SL (Rated Voltage: DCkV) DEA Series SL (Rated Voltage: DC.15kV) Allowable Voltage (Vp-p) p 100p 0p 470p Allowable Voltage (Vp-p) (150) p 100p 0p requency (khz) requency (khz) DEC Series SL (Rated Voltage: DC6.kV) Allowable Voltage (Vp-p) (600) 1000 to p 47p 100p requency (khz) 5 Continued on the following page.

55 High Voltage Ceramic Capacitors!Caution Continued from the preceding page. <DE Series> 1. Operating Voltage The frequency of the applied sine wave voltage should be less than 100kHz. The applied voltage should be less than the value shown in the figure below. or non-sine wave that includes a harmonic frequency, please contact our sales representatives or product engineers. Allowable Voltage (Vp-p) (600) to 10p 1 to p The temperature of the surface of the capacitor: below the upper limit of its rated operating temperature range (including self-heating). 7 to 47p The capacitor can be applied at a maximum of 6.kVp-p at 100kHz when the lamp is turned on. Voltage AC Voltage requency (khz) Positional Measurement Vp-p. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.). ail-safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fume. 5

56 High Voltage Ceramic Capacitors!Caution!Caution (Storage and Operating Condition) Operating and Storage Environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to moisture. Before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months after delivery. Check the solderability after 6 months or more. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED.!Caution (Soldering and Mounting) 1. Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment.. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. Soldering the capacitor with a soldering iron should be performed in following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time:.5 sec. max.. Bonding, Resin Molding and Coating or bonding, molding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the performance of the bonded, molded or coated product in the intended equipment. When the amount of applications, dryness/hardening conditions of adhesives and molding resins containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short circuit. The variation in thickness of adhesive, molding resin or coating may cause outer coating resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling. 4. Treatment after Bonding, Resin Molding and Coating When the outer coating is hot (over 100 degrees C.) after soldering, it becomes soft and fragile. Therefore, please be careful not to give it mechanical stress. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED.!Caution (Handling) Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 54

57 High Voltage Ceramic Capacitors Notice Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity: Output of 0 watts per liter or less. Rinsing time: 5 min. maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. Notice (Rating) of Capacitors 1. DEA/DEC/DE Series (Temp. CH, SL) might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit.. DEB/DEC Series (Temp. B, E, ) Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information.. DEH Series might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. 55

58 Safety Standard Certified Ceramic Capacitors for Automotive Type KJ -Class X1, Y- (or Automotive Use/AC Line ilter of PHEV/EV Charger) eatures D max. T max. 1. Capacitors designed for AC line filters for PHEV/EV.. Meet AEC-Q00. Heat cycle: 1000cycle (-55/+15 deg.) 4. Class X1/Y capacitors certified by UL/ENEC(VDE). 5. Rated Voltage: AC00V 6. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). 7. Available product for RoHS Restriction (EU Directive 00/95/EC). 8. Taping available for automatic insertion. [Bulk] Vertical Crimp Long (A) e ±1.0 Code A 5.0 min..0 max. (in mm) Coating Extension e Up to the end of crimp 0.6±0.05 Applications D max. T max. 1. Ideal for use as Y capacitors for AC line filters and primary-secondary coupling on battery chargers for PHEV/EV.. Ideal for use as a filter capacitor for DC-DC converters for PHEV/EV and HEV. e 5.0±1.0.0 max. ±0.8 (in mm) [Bulk] Vertical Crimp Short (B) Code B Coating Extension e Up to the end of crimp 0.6±0.05 Standard Certification Marking UL ENEC (VDE) Standard No. UL EN Certified No. E Rated Voltage AC00V(r.m.s.) 1 5 Example 47M KJ00~ X1 Y 1D Item Type Designation KJ Nominal (Marked with figures) Tolerance 4 Company Name Code 15 : Made in Thailand 5 Manufactured Date Code Class Code X1Y Rated Voltage Mark 00~ 9 56 Part Number AC Rated Voltage Temp. Dia. D Spacing (mm) Thickness T Long Bulk Short Bulk Taping DE6BKJ101Kppp 00Vac(r.m.s.) B 100p±10% 8.0mm max mm max. AB BB NA DE6BKJ151Kppp 00Vac(r.m.s.) B 150p±10% 8.0mm max mm max. AB BB NA DE6BKJ1Kppp 00Vac(r.m.s.) B 0p±10% 8.0mm max mm max. AB BB NA DE6BKJ1Kppp 00Vac(r.m.s.) B 0p±10% 8.0mm max mm max. AB BB NA DE6BKJ471Kppp 00Vac(r.m.s.) B 470p±10% 8.0mm max mm max. AB BB NA DE6BKJ681Kppp 00Vac(r.m.s.) B 680p±10% 9.0mm max mm max. AB BB NA DE6EKJ10Mppp 00Vac(r.m.s.) E 1000p±0% 7.0mm max mm max. AB BB NA DE6EKJ15Mppp 00Vac(r.m.s.) E 1500p±0% 8.0mm max mm max. AB BB NA DE6EKJMppp 00Vac(r.m.s.) E 00p±0% 9.0mm max mm max. AB BB NA DE6EKJMppp 00Vac(r.m.s.) E 00p±0% 10.0mm max mm max. AB BB NA DE6EKJ47Mppp 00Vac(r.m.s.) E 4700p±0% 1.0mm max mm max. AB BB NA Three blank columns are filled with the lead and packaging codes. Please refer to the columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KJ) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment.

59 Type KJ and Test Methods Operating Temperature Range: -40 to +15 C No. Item 1 and Dimensions Marking To be easily legible 4 Dissipation actor (D..) B, E 5 Insulation Resistance () 10000MΩ min. No visible defect, and dimensions are within specified range. Within specified tolerance D..< =.5% Test Method The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. The capacitor should be visually inspected. The dissipation factor should be measured at 0 C with 1±0.1kHz and AC5V(r.m.s.) max. The insulation resistance should be measured with DC500±50V within 60±5 sec. of charging. The voltage should be applied to the capacitor through a resistor of 1MΩ. Between Wires No failure The capacitor should not be damaged when the test voltages from Table 1 are applied between the lead wires for 60 sec. Type KJ <Table 1> Test Voltage AC600V(r.m.s.) 6 Dielectric Strength Insulation No failure irst, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, a metal foil should be closely wrapped around the body of the capacitor to the distance of about to 4mm from each terminal. Then, the capacitor should be inserted into a container filled with metal balls of about 1mm diameter. inally, AC Type KJ Test Voltage AC600V(r.m.s.) Metal oil voltage from Table is applied for 60 sec. between the capacitor lead wires and metal balls. <Table > about to 4mm Metal Balls 7 Temperature Characteristics 8 Solderability 9 Resistance to Soldering Heat Dielectric Strength B Within ±10% E Within +0 55% (Temp. range: -5 to +85 C) wire should be soldered with uniform coating on the axial direction over /4 of the circumferential direction. Within ±10% 1000MΩ min. Per Item 6 Step * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa The capacitance measurement should be made at each step specified in Table. <Table > Temperature (ºC) 0± -5± 0± 85± 0± Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Should be placed into steam aging for 8 hrs.±15 min. After the steam aging, the lead wire of a capacitor should be dipped into an ethanol solution of 5% rosin and then into molten solder for 5+0/-0.5 sec. The depth of immersion is up to about 1.5 to.0mm from the root of lead wires. Temp. of solder: ree Solder (Sn-Ag-0.5Cu) 45±5 C H6 Eutectic Solder 5±5 C As shown in the figure, the lead wires should be immersed in solder Thermal Capacitor Screen of 60±5 C up to 1.5 to.0mm 1.5 from the root of terminal for 10±1 to.0mm sec. Molten Pre-treatment: Solder Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* Continued on the following page. 9 57

60 Type KJ and Test Methods Continued from the preceding page. No. 10 Vibration 11 Mechanical Shock Item Solder the capacitor and gum up the body to the test jig Resin (Adhesive) Within the specified tolerance (glass epoxy board) by resin (adhesive). The capacitor should be firmly soldered to the supporting lead wire, 1.5mm in total amplitude, with about a 0 minutes rate of D.. vibration change from 10Hz to 000Hz and back to 10Hz. B, E D..< =.5% This motion should be applied 1 times in each of mutually perpendicular directions (total of 6 times). The acceleration is 5g max. D.. Within the specified tolerance B, E 10000MΩ min. D..< = 5.0% Test Method Solder the capacitor and gum up the body to the test Resin (Adhesive) jig (glass epoxy board) by resin (adhesive). Three shocks in each direction should be applied along mutually perpendicular axes to and from of the test specimen (18 shocks). The specified test pulse should be half-sine and should have a duration: 0.5ms, peak value: 100g and velocity change: 4.7m/s. 1 Humidity (Under Steady State) D.. B E B, E 000MΩ min. Within ±10% Within ±15% D..< = 5.0% Set the capacitor for 1000±1 hrs. at 85± C in 80 to 85% relative humidity. Pre-treatment: Capacitor should be stored at 15± C for 1hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* Dielectric Strength Per Item 6 1 Humidity Loading D.. B E B, E 000MΩ min. Within ±10% Within ±15% D..< = 5.0% Apply the rated voltage for 1000±1 hrs. at 85± C in 80 to 85% relative humidity. Pre-treatment: Capacitor should be stored at 15± C for 1hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* Within ±0% 000MΩ min. Impulse Voltage Each individual capacitor should be subjected to a 5kV impulses for three times. Then the capacitors are applied to life test. 100 (%) ront time (T1) =1.μs=1.67T Time to half-value (T) =50μs 0 0 T t T Life Dielectric Strength Per Item 6 T Apply a voltage from Table 4 for 1000 hrs. at 15+/-0 C, and relative humidity of 50% max. <Table 4> Applied Voltage AC510V(r.m.s.), except that once each hour the voltage is increased to AC1000V(r.m.s.) for 0.1 sec. Pre-treatment: Capacitor should be stored at 15± C for 1hr., then placed at room condition* for 4± hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to hrs. at room condition.* * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 58

61 Type KJ and Test Methods Continued from the preceding page. No. 15 Robustness of Terminations Item Tensile Bending wire should not be cut off. Capacitor should not be broken. Test Method As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returend to its original position and bent 90 in the opposite direction at the rate of one bend in to sec. The capacitor should be individually wrapped in at least one, but not more than two, complete layers of cheesecloth. The capacitor should be subjected to 0 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for min. after the last discharge. W S1 L1 L R Tr S C1 UAC C L C L4 Cx Ct Ut 16 Active lammability The cheesecloth should not catch on fire. Oscilloscope C1, : 1μ±10% C : 0.0μ±5% 10kV L1 to 4 : 1.5mH±0% 16A Rod core choke Ct : μ±5% 10kV R : 100Ω±% Cx : Capacitor under test UAC : UR±5% : use, Rated 10A UR : Rated Voltage Ut : Voltage applied to Ct Ux 5kV 17 Passive lammability The burning time should not exceed 0 sec. The tissue paper should not ignite. The capacitor under test should be held in the flame in the position that best promotes burning. Each specimen should only be exposed once to the flame. Time of exposure to flame: 0 sec. Length of flame : 1±1mm Gas burner : Length 5mm min. Inside Dia. 0.5±0.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. About 8mm 45 00±5mm time Test Specimen 18 Temperature Cycle D.. Dielectric Strength B E B, E 000MΩ min. Per Item 6 Within ±10% Within ±0% D..< = 5.0% The capacitor should be subjected to 1000 temperature cycles. Step 1 4 * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Temperature (ºC) -55+0/- Room temp. 15+/-0 Room temp. Tissue About 10mm Thick Board Time (min) 0 0 Cycle time: 1000 cycles Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* Continued on the following page. 9 59

62 Type KJ and Test Methods Continued from the preceding page. No. Item Test Method 19 High Temperature Exposure (Storage) D.. Within ±0% B, E 1000MΩ min. D..< = 5.0% Set the capacitor for 1000±1 hrs. at 150± C. Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* 0 Thermal Shock D.. except color change of outer coating. B E B, E 000MΩ min. Within ±10% Within ±0% D..< = 5.0% The capacitor should be subjected to 00 cycles. Step 1 Temperature (ºC) -55+0/- 15+/-0 Time (min) 0 0 Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* 1 Resistance to Solvents D.. B E B, E 000MΩ min. Within ±10% Within ±0% D..< = 5.0% Per MIL-STD-0 Method 15 Solvent 1: 1 part (by volume) of isopropyl alcohol parts (by volume) of mineral spirits Solvent : Terpene defluxer Solvent : 4 parts (by volume) of water 1 part (by volume) of propylene glycol monomethyl ether 1 part (by volume) of monoethanolomine Biased Humidity D.. B E B, E 000MΩ min. Within ±10% Within ±15% D..< = 5.0% Apply the rated voltage and DC1.+0./-0V (add 6.8kΩ resistor) at 85± C and 80 to 85% humidity for 1000±1 hrs. Pre-treatment: Capacitor should be stored at 15± C for 1hr., then placed at room condition* for 4± hrs. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* 9 Moisture Resistance D.. B E B, E 000MΩ min. Within ±10% Within ±0% D..< = 5.0% Apply 4 hrs. of heat (5 to 65 C) and humidity (80 to 98%) treatment shown below, 10 consecutive times. Pre-treatment: Capacitor should be stored at 15± C for 1 hr., then placed at room condition* for 4± hrs. Post-treatment: Capacitor should be stored for 4± hrs. at room condition.* C Temperature Humidity 90-98% Humidity 80-98% C Initial measurement Humidity 90-98% One cycle 4 hours Humidity 80-98% Humidity 90-98% Hours * "Room condition" Temperature: 15 to 5 C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 60

63 Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example) - Temperature Characteristics 40 Insertion Loss - requency Characteristics Cap. (%) B E E B Insertion Loss (db) (6) (5) (4) () (1) () Temperature ( C) requency (MHz) Type KJ Signal power: 1mW AC40V(r.m.s.) / 60Hz is applied on the capacitor. (1) 100p () 0p () 470p (4) 1000p (5) 00p (6) 4700p Leakage Current Characteristics Type KJ (B char.) AC voltage : 60Hz Temperature: 5 C Type KJ (E char.) AC voltage : 60Hz Temperature: 5 C p Leakage current [ma(r.m.s.)] p 0p 100p Leakage current [ma(r.m.s.)] p 1000p AC voltage [V(r.m.s.)] AC voltage [V(r.m.s.)] 61

64 Safety Certified Ceramic Capacitors for Automotive Packaging Taping 15mm pitch / lead spacing 7.5mm taping Vertical crimp type ( Code: N) P P D ΔS Δh1 O Δh L P1 e W0 W H0 W1 W T max. Marked side * *.0 max. P0 ød0 H0 t t1 Item Pitch of component Pitch of sprocket hole spacing Length from hole center to component center Length from hole center to lead diameter Deviation along tape, left or right Carrier tape width Position of sprocket hole distance between reference and bottom planes Protrusion length Diameter of sprocket hole diameter Total tape thickness Total thickness, tape and lead wire thickness Portion to cut in case of defect Hold down tape width Hold down tape position Coating extension on lead Deviation across tape, front Deviation across tape, rear Code P P0 P P1 D ΔS W W1 H0 ød0 t1 t T L W0 W e Δh1 Δh N 15.0± ±0. 7.5± ±1.5.75±1.0 See the individual product specifications. 0± ± ± to ± ± ± max. 7.0 max min. 1.5±1.5 Up to the end of crimp.0 max. (in mm) Packaging Styles Minimum Quantity (Order in Sets Only) Bulk Polyethylene Bag Ammo Pack Taping [Bulk] Dia. D (mm) Code A Long (pcs./bag) Code B Short 7 to [Taping] Code: N 700pcs./Ammo Pack 6

65 Safety Certified Ceramic Capacitors for Automotive!Caution!Caution (Rating) 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p that contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage () Positional Measurement V0-p V0-p Vp-p Vp-p Vp-p. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may have self-generated heat due to dielectric loss. Applied voltage load should be such that self-generated heat is within 0 C under the condition where the capacitor is subjected to an atmospheric temperature of 5 C. When measuring, use a thermocouple of small thermal capacity-k of ø0.1mm under conditions where the capacitor is not affected by radiant heat from other components or wind from surroundings. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.). Test Condition for Withstanding Voltage (1) Test Equipment Test equipment for AC withstanding voltage should be used with the performance of the wave similar to 50/60Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. Continued on the following page. 6

66 Safety Certified Ceramic Capacitors for Automotive!Caution Continued from the preceding page. () Voltage Applied Method When the withstanding voltage is applied, the capacitor's lead or terminal should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, test voltage should be applied with the zero cross.* At the end of the test time, the test voltage should be reduced to near zero, and then capacitor's lead or terminal should be taken off the output of the withstanding voltage test equipment. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, the surge voltage may rise, and therefore, a defect may be caused. *ZERO CROSS is the point where voltage sine wave passes 0V. See the figure at right. 0V Voltage sine wave zero cross 4. ail-safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fuming. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 64

67 Safety Certified Ceramic Capacitors for Automotive!Caution!Caution (Storage and Operating Condition) Operating and Storage Environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to moisture. Before cleaning, bonding, or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months after delivery. Check the solderability after 6 months or more. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED.!Caution (Soldering and Mounting) 1. Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment.. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specifications of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. Soldering the capacitor with a soldering iron should be performed in the following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time:.5 sec. max.. Bonding, Resin Molding and Coating or bonding, molding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the performance of the bonded, molded or coated product in the intended equipment. When the amount of applications, dryness/hardening conditions of adhesives and molding resins containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short circuit. The variation in thickness of adhesive, molding resin or coating may cause outer coating resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling. 4. Treatment after Bonding, Resin Molding and Coating When the outer coating is hot (over 100 degrees C.) after soldering, it becomes soft and fragile. Therefore, please be careful not to give it mechanical stress. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED.!Caution (Handling) Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment. AILURE TO OLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE UMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 65

68 Safety Certified Ceramic Capacitors for Automotive Notice Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity: Output of 0 watts per liter or less. Rinsing time: 5 min. maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. Notice (Rating) 1. of Capacitors Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a constant time circuit. Please contact us if you need detailed information.. Performance Check by Equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. Therefore, the capacitance value may change depending on the operating condition in the equipment. Therefore, be sure to confirm the apparatus performance of receiving influence in the capacitance value change of a capacitor, such as leakage current and noise suppression characteristic. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed specific value by the inductance of the circuit. 66

69 Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications Manufacturing plants that produce the products in this catalog have obtained the ISO9000 quality system certificate. Plant Izumo Murata Manufacturing Co., Ltd. Murata Electronics (Thailand), Ltd. Taiwan Murata Electronics Co., Ltd. Applied Standard ISO9001 ISO9001 ISO

70 Cat. No. C85E-5 Global Locations or details please visit Note 1 Export Control or customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or () goods or systems specially designed or intended for military end-use or utilization by military end-users. or customers in Japan: or products which are controlled items subject to the oreign Exchange and oreign Trade Law of Japan, the export license specified by the law is required for export. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment Aerospace equipment Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Product specifications in this catalog are as of March 016. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. Murata Manufacturing Co., Ltd.