Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
|
|
|
- Shon Lloyd
- 7 years ago
- Views:
Transcription
1 Astro Sign-rac Overhead Street Name Signs Stellar Series A-0502 Sign Clamp AS-3004 AS-3009 Astro Sign-rac, Stellar and Mount for Overhead Street Name Signs AS and and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. Astro Sign-rac, Stellar Mount for Overhead Street Name Signs AS A-0502 Sign Clamp : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. S 1-6 to 3-0 LONG TUE *A 12 Maximum sign height: 48 S 3-6 to 8-0 LONG TUE *A Maximum sign height: *A = 3 TUE 3 3 *A = TUE S 8 to 10 LONG TUE *A Maximum sign height: 16 C 26 3 C 3 *A = TUE 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-1
2 Astro Sign-rac Overhead Street Name Signs Tallon Series A-0502 Sign Clamp A-3042 A-3043 Astro Sign-rac, Tallon and Mount for Overhead Street Name Signs A and and : 29, 36, 42, 48, 56, 72, or 84. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. Astro Sign-rac, Tallon Mount for Overhead Street Name Signs A A-0502 Sign Clamp : 62, 84, 96, 110, 1, 132, 144, or 2. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. S 1-6 to 3-0 LONG TUE *A 12 Maximum sign height: 48 S 3-6 to 8-0 LONG TUE *A Maximum sign height: *A = 3 TUE 3 3 *A = TUE S 8 to 10 LONG TUE *A Maximum sign height: 16 C 26 3 C 3 *A = TUE 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
3 Astro Sign-rac Overhead Street Name Signs Stellar Tenon Series A-0502 Sign Clamp A-3010 Astro Sign-rac, Stellar Tenon Mount for Overhead Street Name Signs AS S 1-6 to 3-0 LONG TUE *A 12 Maximum sign height: 48 S 3-6 to 8-0 LONG TUE *A Maximum sign height: *A = 3 TUE 3 3 *A = TUE S 8 to 10 LONG TUE *A Maximum sign height: 16 C C *A = TUE 1. All assemblies are supplied standard with stainless fasteners. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for available paint colors. 7/13/ sales@pelcoinc.com fax: Page T6-2a
4 Astro Sign-rac Overhead Street Name Signs Galaxy Series A-0502 Sign Clamp A-3055 Astro Sign-rac, Galaxy Mount for Overhead Street Name Signs AG : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AG SS-PNC. S 1-6 to 3-0 LONG TUE *A 12 Maximum sign height: 48 S 3-6 to 8-0 LONG TUE *A Maximum sign height: *A = 3 TUE 3 3 *A = TUE S 8 to 10 LONG TUE *A Maximum sign height: 16 C C *A = TUE 1. All assemblies are supplied standard with stainless fasteners. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for available paint colors. Page T6-2b - sales@pelcoinc.com fax:
5 Astro Sign-rac Overhead Street Name Signs A-3004 A-0502 Sign Clamp Astro-rac Assy, w/ Signals, and Mount A and 8 * 3 HOLE * 36 TUE and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. Astro-rac Assy, w/ Signals, Mount A-3009 A A-0502 Sign Clamp 8 * 3 HOLE * 36 TUE : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-3
6 Astro Sign-rac Formed Tubes Stellar Series AS-3004 A-0507 Sign rac w/ Hdwr AS-3009 A-0507 Sign rac w/ Hdwr A-0256 U-olt Kit A-0256 U-olt Kit Astro Sign-rac, Stellar and Mount, Formed Tube AS elow and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. Astro Sign-rac, Stellar Mount, Formed Tube AS elow and : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. * Sign * * Sign * AS-3010 A-0507 Sign rac w/ Hdwr A-0256 U-olt Kit Astro Sign-rac, Stellar Tenon Mount, Formed Tube AS * Sign * 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
7 Astro Sign-rac Formed Tubes Tallon Series A-0507 Sign rac w/ Hdwr A-3042 Astro Sign-rac, Tallon and Mount, Formed Tube A and * Sign and : 29, 36, 42, 48, 56, 72, or 84. Specify stainless upgrade by icluding -SS in the part number, i.e., A SS-PNC. 3 * Astro Sign-rac, Tallon Mount, Formed Tube A-3043 A A-0507 Sign rac w/ Hdwr * Sign : 62, 84, 96, 110, 1, 132, 144, or 2. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. 3 * 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-5
8 This page is intentionally left blank. Page T6-5a - sales@pelcoinc.com fax:
9 Astro Sign-rac Formed Tubes Galaxy Series A-3055 A-0507 Sign rac w/ Hdwr Astro Sign-rac, Galaxy Mount, Formed Tube AG : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AG SS-PNC. * Sign * 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-5b
10 Astro Sign-rac Formed Tubes Articulated Mounts A-3011 A-0507 Sign rac w/ Hdwr A-0256 U-olt Kit Astro Sign-rac, Articulating and Mount, Formed Tube A and * Sign * and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. A-3013 A-0507 Sign rac w/ Hdwr A-0256 U-olt Kit Astro Sign-rac, Articulating Mount, Formed Tube A * : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. * Sign All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
11 Astro Sign-rac Formed Tubes Extended Mounts A-3006 A-0256 U-olt Kit A-0507 Sign rac w/ Hdwr Astro Sign-rac, Extended and Mount, Formed Tube Nipple A =5 Nipple 6=6 Nipple 8=8 Nipple and and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. 3 * * Sign A-3034 A-0256 U-olt Kit Astro Sign-rac, Extended Mount, Formed Tube A-0507 Sign rac w/ Hdwr Nipple A =5 Nipple 6=6 Nipple 8=8 Nipple : 62, 84, 96, 110, 1, 132, 144, or 2. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. 3 * * Sign All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-7
12 Astro Sign-rac Electrical Type Stellar Series AS-3004 Astro Sign-rac, Stellar and Mount, ack Attachment for Internally Illuminated Signs Tube AS =23 Tube 37=37 Tube 46=46 Tube 58=58 Tube 74=74 Tube and and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. AS-3009 Astro Sign-rac, Stellar Mount, ack Attachment for Internally Illuminated Signs Tube AS =23 Tube 37=37 Tube 46=46 Tube 58=58 Tube 74=74 Tube : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable where applicable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
13 Astro Sign-rac Electrical Type Stellar Series AS-3004 Astro Sign-rac, Stellar and Mount, ack Attachment for Internally Illuminated Signs and Signals Tube AS =23 Tube 37=37 Tube 46=46 Tube 58=58 Tube 74=74 Tube and SE-3042 Assembly Kit and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. AS-3009 Astro Sign-rac, Stellar Mount, ack Attachment for Internally Illuminated Signs and Signals Tube AS =23 Tube 37=37 Tube 46=46 Tube 58=58 Tube 74=74 Tube SE-3042 Assembly Kit : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-9
14 Astro Sign-rac Electrical Type Stellar Series AS-3004 Astro Sign-rac, Stellar and Mount Top & ottom Attachment for Internally Illuminated Signs Tube AS =23 Tube 37=37 Tube 46=46 Tube 58=58 Tube 74=74 Tube and and : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. AS-3009 Astro Sign-rac, Stellar Mount Top & ottom Attachment for Internally Illuminated Signs Tube AS =23 Tube 37=37 Tube 46=46 Tube 58=58 Tube 74=74 Tube : 62, 84, 96, 110, 1, 132, 144, 2, or 280. Specify stainless upgrade by including -SS in the part number, i.e., AS SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. Suggested maximum sign face of 16 sq. ft. per bracket. 3. See Reference Section for clamp kit pole diameters. 4. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
15 Sign racket Assy for Rigid Structures Tallon Series A-3043 Sign racket Assy, Tallon Mount For Rigid Structures w/ Alum Tube Sign ar A =8 w/ Holes 6 16 =w/ Holes 9-3/4 Hole : 62, 84, 96, 110, 1, 132, 144, or 2. Specify stainless upgrade by including -SS in the part number, i.e., A SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-10a
16 This page is intentionally left blank. Page T6-10b - sales@pelcoinc.com fax: /1/15
17 Mast Arm Sign racket SE-5070 Single Point Sign Hanger A-0121 Astro Mini-rac and Mount SE-5048 Hardware Kit Sign Hanger Assy, Free-Swinging w/ and Mini-rac and SE and : 29, 36, 42, 48, 56, 72, or 84. All assemblies supplied with stainless bushings and fasteners. Specify stainless upgrade by including -SS in the part number, i.e., SE SS-PNC. A-0160 Astro Mini-rac Mount Sign Hanger Assy, Free-Swinging w/ Mini-rac SE SE-5148 Single Point Sign Hanger SE-5048 Hardware Kit : 45, 62, or 84. Specify stainless upgrade by including -SS in the part number, i.e., SE SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors. - sales@pelcoinc.com fax: Page T6-11
18 Mast Arm Sign racket 2 3 A-0121 Astro Mini-rac SE-0902 Sign Hanger SE-0547 Angle T D *A= S A-0160 Astro Mini-rac Sign Hanger Assy, Free-Swinging w/ and Mini-rac for Overhead Street Name Sign SE and and : 29, 36, 42, 48, 56, 72, or 84. Specify stainless upgrade by including -SS in the part number, i.e., SE SS-PNC. C RACKET ANGLE S S 3-6 to 9-0 LONG ANGLE T * A C RACKET D SE-0902 Sign Hanger SE-0547 Angle Sign Hanger Assy, Free-Swinging w/ Mini-rac for Overhead Street Name Signs SE : 45, 62, or 84. All assemblies supplied with stainless bushing and fasteners. Specify stainless upgrade by including -SS in the part number, i.e., SE SS-PNC. 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade to include stainless steel clamp screws or cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
19 Sign Hanger Assemblies Span Wire Sign Hanger SE-0338 Span Wire Clamp SE-5035 Hardware Kit SE-0338 Span Wire Clamp Span Wire Sign Hanger, 16, Adjustable with Tether, Alum SE Specify stainless bushing by including -S in the part number, i.e., SE-5116-S-PNC. Span Wire Sign Hanger, 16, Adjustable with Stabilizer ar, Alum SE SE-5035 Hardware Kit Specify stainless bushing by including -S in the part number, i.e., SE-5114-S-PNC. SE-0338 Span Wire Clamp Span Wire Sign Hanger, Double, 16, Adjustable with Tether, Alum SE SE-5035 Hardware Kit Specify stainless bushing by including -S in the part number, i.e., SE-5112-S-PNC. 1. All assemblies are supplied standard with stainless fasteners and galvanized hardware on span wire clamp. 2. See Reference Section for available paint colors. 4/1/ sales@pelcoinc.com fax: Page T6-13
20 Sign Hanger Assemblies Span Wire Sign Hanger SE-3213 Serrated Span Wire Clamp Span Wire Sign Hanger, 6 & 14 Serrated Span Wire Clamp, Alum SE Specify stainless upgrade by including -SS in the part number, i.e., SE-5115-SS-PNC. Span Wire Sign Hanger, 6 & o Span Wire Clamp, Adjustable, Alum SE o Span wire Clamp SE Specify stainless upgrade by including -SS in the part number, i.e., SE-5111-SS-PNC. 1. All assemblies are supplied standard with stainless fasteners and galvanized hardware on span wire clamp. Stainless upgrade to include stainless steel hardware on span wire clamps where applicable. 2. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax: /1/15
21 Sign Hanger Assemblies Span Wire Sign Hanger SE-5043 Span Wire Hanger SE-0338 Span Wire Clamp SE-0338 Span Wire Clamp SE-5206 Sign Hanger Assy Sign Hanger Assy, Iron Span Wire Clamp, Alum SE Sign Hanger Assy, Iron Span Wire Clamp, Top & ottom Mount w/ Tether, Alum SE * Stainless bushing and/or stainless upgrade available. Specify by adding -S and/or -SS in the part number, i.e., SE S-SS-PNC Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e., SE S-SS-PNC. * SE-5046 Span Wire Hanger SE-0338 Span Wire Clamp Sign Hanger Assy, Adjustable, Iron Span Wire Clamp, Alum SE Tether Assy T=Tether lank=none * Stainless bushing and/or stainless upgrade available. Specify by adding -S and/or -SS in the part number, i.e., SE T-S-SS-PNC. 1. All assemblies are supplied standard with stainless fasteners and galvanized hardware on span wire clamp. Stainless upgrade to include stainless hardware on span wire clamps. 2. See Reference Section for available paint colors. 4/1/ sales@pelcoinc.com fax: Page T6-15
22 Sign Hanger Assemblies Span Wire Sign Hanger Pelco manufactures a variety of sign brackets in both rigid and free-swinging mounts, flat and internally illuminated signs. SE-0338 Span Wire Clamp Span Wire Sign Hanger Assy, Free-Swinging Iron Span Wire Clamp, Tether & Sign Clamps, Alum Tube SE =46 Tube 58=58 Tube 74=74 Tube A-0502 Sign Clamp Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e., SE S-SS-PNC. 1. All assemblies are supplied standard with stainless fasteners and galvanized hardware on span wire clamp. Stainless upgrade to include stainless steel hardware on span wire clamps. 2. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax: /1/15
23 Sign Hanger Assemblies Free-Swinging Sign Hanger Pelco manufactures a variety of sign brackets in both rigid and free-swinging mounts, flat and internally illuminated signs. SE-3212 Span Wire Clamp SE-5035 Hardware Kit SE-3213 Span Wire Clamp Free-Swinging Sign Hanger, 90 o Span Wire Clamp, 16, Alum SE Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e., SE-5117-S-SS-PNC. Free-Swinging Sign Hanger, Serrated Span Wire Clamp, Adjustable, 16-1/2, Alum SE Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e., SE-5169-S-SS-PNC. SE-3212 Span Wire Clamp SE-3212 Span Wire Clamp Free-Swinging Sign Hanger, 90 o Span Wire Clamp, 7-Hole, Alum SE Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e. SE-5167-S-SS-PNC. Free-Swinging Sign Hanger, 90 o Span Wire Clamp, Extender, Alum SE HOLE * EXTENDER Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e., SE S-SS-PNC. 1. All assemblies are supplied standard with stainless fasteners and galvanized hardware on span wire clamp. Stainless upgrade to include stainless steel hardware and slotted washer where applicable. 2. See Reference Section for available paint colors. 4/1/ sales@pelcoinc.com fax: Page T6-17
24 Assemblies Pelco manufactures a variety of sign brackets in both rigid and free-swinging mounts for flat and internally illuminated signs. Additional sign mounting options can be found in Section T16. Adjustable Assy, Mast Arm, Alum Zee ar SH = 30= 36=36 42=42 lank=none 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors. 3. See Section T16 for additional sign mounting assemblies. Page T sales@pelcoinc.com fax: /1/15
25 Sign Accessories Pelco s safety cable assemblies are available for span wire, Astro-rac, and sign hanger assemblies. Safety for Span Wire SE =84 96=96 110=110 Astro-rac Safety GLV=Galvanized SS=Stainless A =84 96=96 110= =112 GLV=Galvanized SS=Stainless Safety for Sign Hanger Assembly, Stainless SH = 48=48 72=72 100= =1 - SS 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors. 4/1/ sales@pelcoinc.com fax: Page T6-19
26 Sign Accessories Accessories for sign mountings such as hangers, extenders, and tethers are available in a variety of configurations. Hanger Assy, Extender Connector for 1/2 Slot, w/ 1-1/4 olts, Alum SE Hanger Assy, Extender Connector for 3/4 Slot, w/ 1-1/4 olts, Alum SE Specify stainless bushing by including -S in the part number, i.e., SE-5037-S-PNC. Hanger & ody Assy for 1/2 Slot, Tri-Stud, Alum SE Stainless bushing and/or stainless upgrade available. Specify by including -S and/or -SS in the part number, i.e., SE-5036-S-SS-PNC. Extender Assy for 1/2 Slot, w/ Extender Connector & Extender, Alum Extender SE =11 19=19 40=40 72=72 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors. Specify stainless bushing by including -S in the part number, i.e., SE S-PNC. Page T sales@pelcoinc.com fax: /1/15
27 Sign Accessories Accessories for sign mountings such as hangers, extenders, and tethers are available in a variety of configurations. SE-2509 Tether Kit Extender, Alum w/ 1-1/4 olts SE Extender 6=6 11=11 19=19 24= 40=40 72=72 Tether Extender Assy, Alum w/ 1-1/2 olts SE Extender 6=6 11=11 19=19 24= 40=40 72=72 - PNC - PNC Extender Assy, Alum 11 Extenders & w/ 1 & 1-1/2 olts SE All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors. 7/13/ sales@pelcoinc.com fax: Page T6-21
28 Sign Accessories Accessories for sign mountings such as hangers, extenders and tethers are available in a variety of configurations. Tether Plate Assembly, Alum w/ 5/16 x 2-1/4 olts SE Tether Plate Assembly, Alum w/ 5/16 x 1-1/2 olts SE Tether Plate Assembly, Alum w/ Stabilizer ars & 5/16 x 1-3/4 olts SE Tether Plate Assembly, Alum w/ Stabilizer ar, lock, & 5/16 x 2 olts SE All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors. Page T sales@pelcoinc.com fax:
CAMERA MTGS. Astro-Brac 1-Piece Camera Bracket Stellar Series
Astro-Brac 1-Piece Camera Bracket Stellar Series AS-3004 SH-0514 SH-0514 Stellar Series Mount, Alum AS-0170 - - - 46=46 : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify by including -SS in the part number,
1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
TRAFFIC ACCESSORIES. GPL Geometrically Programmed Louvers
GPL Geometrically Programmed Louvers The Pelco GPL is a precisely aimed and controlled traffic signal louvering system. Drivers see a full circle of bright projected light when they are within the preset
ANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
CABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
F-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661
PARTS MANUAL FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661 FOR YOUR CONVENIENCE YOU MAY ALSO PLACE ORDERS
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-125-35M 35 Mast Extension (Optional) EZ-125-SK Stake Kit (Optional) EZ-46-3 Tar Pad Kit (Optional) EZ-GWA Guy Wire Kit (Optional) Ambient Weather
FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 510-42000-00 KIT P/N 510-42010-00 KIT P/N 510-42015-00
FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 0-000-00 KIT P/N 0-00-00 KIT P/N 0-0-00 TOOLS REQUIRED () /" WRENCHES OR SOCKETS TAPE MEASURE TORQUE WRENCH
POLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
POLE MOUNT SYSTEM EX-3 INSTALLATION
May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS GENERAL DESCRIPTION:
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
Universal Mount Industrial Monitors
Universal Mount Industrial Monitors Tu Sitio de Automatización! VESA Mount Options Yoke Mount Options Pedestal Mount Options VESA Mount Options Radial Arm Wall Mount Bracket Benchtop Stand Radial Arm Mount
ACTIV-8 PLUS Insulated Conductor Bar
ACTIV-8 PLUS Insulated Conductor Bar A product made in Australia www.conductix.com.au ACTIV-8 PLUS ACTIV-8 is the most widely used and stocked conductor rail in use in Australia. It was designed by Conductix
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F The OVR three-phase recloser style guide aids in the proper selection of your OVR three-phase style number.
POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents
-J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English
PRESTRESSED CONCRETE POLES The Solid Alternative to Wood
Prestressed Concrete Utility Poles U-1 PRESTRESSED CONCRETE S The Solid Alternative to Wood Lonestar Prestress concrete poles were developed to meet the expanding need of a supporting structure for; street,
SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
CDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
Accessories. KwikWire Clamps. KwikWire Clamp Working Loads* 78205140719 BKC100 1 /16" & 3 /32" 100 78205140723 BKC200 1 /8" & 3 /16" 50
KwikWire Clamps KwikWire system replaces jack chain or ATR to support lighting, ductwork, cable tray, etc. Can be quickly installed around beams - No drilling required. Ideal for sloped ceilings - can
I-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables
I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven
Fittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
This mount uses concrete parking bumpers and a Davis tripod to create a mounting solution for nonpenetrable
NON-PENETRATING FLAT ROOF MOUNT Application Note 18 For Any Davis Weather Station Installed on a Mounting Tripod Introduction This application note describes various mounting solutions for non-penetrable
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Nordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
Wall Mounted Products
Metallic Indoor PK Termination Boxes Prysmian Part Numbers: see below Metallic PK Termination Boxes are designed for the termination, branching and distribution of fibre optic cables in telecommunication,
Powerware Enclosure Solutions Product Focus
Powerware Enclosure Solutions Product Focus Powerware Enclosures IT availability and reliability are critical corporate issues in today s demanding, mission-critical environments. For this reason, it is
EZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
RAIN COLLECTOR S HELF MANUAL
RAIN COLLECTOR S HELF MANUAL The Rain Collector Shelf provides a good mounting support for your Rain Collector II. The Rain Collector Shelf is designed to be attached to Davis Sensor Mounting Arm, and
LED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
Home Signal Distribution Kit for Cable TV Plus SIRIUS
Home Signal Distribution Kit for Cable TV Plus SIRIUS For Use With a Single SIRIUS Radio Installation Manual Thank you for purchasing the Home Signal Distribution Kit for Cable TV Plus SIRIUS The Home
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
Item No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
WHAT S DIFFERENT. about TimberTech CableRail? Covered under warranty by ONE trusted manufacturer. Saves TIME and EFFORT
WHAT S DIFFERENT about TimberTech CableRail? Covered under warranty by ONE trusted manufacturer Consumers want project simplicity. Offer them the added luxury by building high-end custom cable railing
Super LED F7. Led Power 160W Consumption 180W PFC 0,96
Super LED F7 Led Power 160W Consumption 180W PFC 0,96 LED Fresnel SPOTLIGHT CRI greater than 90 White light, either Tungsten or Daylight balanced Correlated Colour Temperature IP23 rated: Rain Protected
Brackets and Tenons. Product Specifications. PB Series
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
NORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS
SECTION GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS RELATED SECTIONS: Section 27 00 00 General Requirements Section 27 02 00 Communication General Requirements Section 27 05 28 Pathways for Communications
WHAT S DIFFERENT ABOUT OUR CABLERAIL?
WHAT S DIFFERENT ABOUT OUR CABLERAIL? Manufactured for use with: Covered under warranty by ONE trusted manufacturer Consumers want project simplicity. Offer them the added luxury by building high-end custom
StructureScan Installation
StructureScan Installation Contents Your StructureScan box is packed with the LSS-1 black box, a Power cable, StructureScan transducer, mounting bracket, 15 foot (4.5m) ethernet cable and a hardware kit.
Section 21. Telecommunication Hardware. www.geindustrial.com BuyLog Catalog 21-1
Introduction...21-1 Fiber Closure Hardware...21-2 Cable Location Surge Protectors...21-4 Introduction GE has been manufacturing Telecommunication Hardware products for over 20 years and has become a leader
Mounting Tripod Kit Installation Manual
Mounting Tripod Kit Installation Manual For use with Davis s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installation. The tripod supports the Integrated Sensor Suite
PITCHED ROOF STRUCTURES
PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system
Part Name/Description Part Number Quantity. Power Cable 4000950-5 1
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Power Cable 4000950-5 1 Raven Harness Adapter Kit 4100525 1 Installation Instructions
READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY
Owner s Manual LSP16H LS3001 LS3002H LS3003 LSP21H LS3101 LS3102H LS3103 LSP24H LS3201 LS3102H LS3103 LSP28H LS3301 LS3302H LS3303 mainframe bundle H-unit bundle accessory box mainframe bundle H-unit bundle
Installation Guide. WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers. February, 2011
WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers Installation Guide February, 2011 Pace Scientific Inc www.pace-sci.com Tel: 704-799-0688 sales@pace-sci.com 1 Disclaimer The following warranty
PARTS LIST DOMESTIC. Eclipse Ergonomic Tilting Braising Pans. BPP-30E, BPP-40E Braising Pans Circa 2003 to Present
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION PARTS LIST DOMESTIC This manual provides s for: Eclipse Ergonomic Tilting Braising Pans MODELS: BPM-30E, BPM-40E BPP-30E, BPP-40E Braising
INSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
design Mario Cucinella MAXIWOODY
58 MAXIWOODY MAXIWOODY 59 Woody was created in 1996. The success of that luminaire with its simple, rounded design, distinctive and instantly recognizable as it was, led to the development of a whole family
multi-axis system ROBOTRAX cable 3D cable carrier system carrier
3D cable multi-ais 3D cable carrier system carrier system Key Features: Perfect for 3D multi-ais movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy
Rack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
Universal Vehicle Power Supply 9007AX01. Installation Instructions
Universal Vehicle Power Supply 9007AX01 Installation Instructions Disclaimer Honeywell International Inc. ( HII ) reserves the right to make changes in specifications and other information contained in
SIMRAD SD10 Sailboat Drive
INSTALLATION MANUAL SIMRAD SD10 Sailboat Drive 20222683/A English Simrad SD10 Sailboat Drive About this document Rev. A First issue 2007 Navico AS. All rights reserved. No part of this work covered by
Wind Direction Smart Sensor (S-WDA-M003)
(S-WDA-M003) The Wind Direction smart sensor is designed to work with HOBO Stations. The smart sensor has a plug-in modular connector that allows it to be added easily to a HOBO Station. All sensor parameters
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
CETAC Z-Drive Assembly
CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your
Installation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
INSTALLATION AND SERVICE MANUAL
INSTALLATION AND SERVICE MANUAL CENTURION EXCEL CENTURA CENTRY THE 21 ST CENTURY SERIES Agency Approvals Medical Electrical Equipment With respect to electric shock, fire And mechanical hazards only In
OPERATIONS AND MAINTENANCE MANUAL ** UNCLASSIFIED ** PROPRIETARY & BUSINESS SENSITIVE INFORMATION
INTRODUCTION 1 OPERATIONS AND MAINTENANCE MANUAL SERIES 500V5-RBM GENERAL INFORMATION 2 INSTALLATION SEAT ADJUSTMENT 3 4 Description, Operation, Maintenance and Illustrated System Breakdown SHOCK ABSORBER
Rating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
features and benefits: dimensions: Approximate weight with cases: 122 lbs / 28.1kgs Shipping Packing case(s): 1 OCE 1 OCH
Formulate Kiosk - 01 FMLT-KIOSK-01 Formulate Kiosks with light weight aluminum tube frames with state-of-the-art printed stretch zipper pillowcase fabric graphics to create funky and functional multimedia
Ariva Powerful Marketing Displays. Exhibit & Display Solutions
Ariva Powerful Marketing Displays Exhibit & Display Solutions Banner Displays BRONZE BRONZE XL (see page 3) (see page 3) Retractable banner stand Twist-out feet Black or silver finish Silver retractable
Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com
System Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com Christensen Manufacturing Corp., Pennington, NJ 08534 System Modular Truck Equipment Tradesman Package SPECIAL SAVE
Installation Instructions:
Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement
Vertical Break Parallel (VBP) / Vertical Break Slant (VBS)
August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers
Selection Chart T-4000 Series Accessories (Part 1 of 5) Code Number Figure Description Application (High or Low Volume)
Code No. LIT-1921710 Issued July 25, 2011 T-4000 Series Accessories Selection Chart T-4000 Series Accessories (Part 1 of 5) ( or Volume) F-100-20 F-300-30 F-300-34 F-300-31 F-300-35 F-500-45 F-300-30 Coupler,
INSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.
MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
In-Ground Basketball System Owners Manual
In-Ground Basketball System Owners Manual Customer Service Center N53 W4700 South Corporate Circle Sussex, WI 53089 U.S.A. Write Model Number From Box Here: WARNING! 3 Capable Adults REQUIRED TOOLS AND
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612 Len & Jerry's specializes in finding solutions to reduce: Weight deflection/vibration frequency cost Problems found frequently
TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246
TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 OPERATION AND SERVICE INSTRUCTIONS AMPHENOL 157 SERIES TELE-PIERCE MULTI-WIRE TERMINATION TOOL 356-246 AMPHENOL TERMINATION SYSTEMS 1830
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
BPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES
BPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES TABLE OF CONTENTS 1992 CONTENTS PAGE BPW Air Suspension Series 3 Hangers 4 Trailing Arms and Attachments
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &
CutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
FLEXTRAY. It s Simple Cable Management CBFT-10. Catalog & Product Installation Guide
CBFT-10 FLEXTRAY It s Simple Cable Management Catalog & Product Installation Guide Flextray Flextray is a flexible, field-adaptable way to manage cables throughout your project. The tray itself can be
Solar Power Systems Models: PVS220W-24 and PVS220W-48 Installation Manual
Solar Power Systems Models: PVS220W-24 and PVS220W-48 Installation Manual 255379 Rev. D0 1015 Printed in U.S.A. Copyright 2015 Federal Signal Corporation Limited Warranty The Alerting and Notification
Assembly Instructions for the InteliTrack 3000 Rail Tracking System
Assembly Instructions for the InteliTrack 3000 Rail Tracking System InteliTrack is a trademark of Sedona Solar Technology. Sedona Solar Technology 16 April 2013 1 1. Before you begin WARNING Safety equipment
Home Signal Distribution Kit for Satellite TV Plus SIRIUS
SR-101C SIRIUS/DBS Signal Combiner System SR-2261 Combiner-Outdoor Made in China DBS IN SIRIUS IN SR-101C SIRIUS/DBS Signal Combiner System SR-2251 Splitter-Indoor Made in China DC IN DBS OUT SIRIUS OUT
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
DirectCommand Installation DirectCommand 3-Channel Spreader Kit
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number With Switch Box Quantity With Remote Switch Display Cable Kit 4100814 1 1 Power Control Relay
ToolLasso System. StepladderAccessories. Load Capacity TL2BC-20 TL2BC-12 TL50 TL5-20 TL5-12
LADDER ACCESSORIES Table of Contents Product Page ToolLasso System 1 JobBucket 2 Pail Shelves and Project Trays 2-3 Stepladder Hanger 3 Extension Ladder Stabilizers 4-5 Ladder Levelers 5-6 Misc. Extension
Quick Connect Boxes Inside Gloveboxes
ULC Series Junction Boxes Quick Connect Boxes Inside Gloveboxes The ULC quick connect junction boxes are the essential elements to optimize the cabling inside gloveboxes. Large range Designed for nuclear
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling