Technical Programme October 2016 Hamburg, Germany

Transcription

1 Technical Programme 9-13 October 2016 Hamburg, Germany

2 Representing the European PM industry european powder metallurgy association EPMA Membership Benefits 10 Reasons to join the EPMA European and world PM production statistics and information Access to PM technology and development programmes Networking opportunities at conferences, events and seminars Information and lobbying on legislation, such as REACH Join the industry-wide benchmarking programme Discounts on training courses, congresses and exhibitions Free listing on the world s most comprehensive PM website Discounted PM publications, reports and journals Weekly news bulletins and quarterly EPMA newsletters Access the Translated Glossary of Powder Metallurgy

3 Contents About World PM Congress Organiser 04 Congress Chairman 05 Steering Committee 06 Technical Programme Committee Congress Schedule EPMA Sectoral Groups 13 EFFIPRO Workshop 15 World PM2016 Technical Programme Opening Plenary Session EPMA Keynote Paper Award 18 - Monday Tuesday Wednesday Thursday Exhibition Floor Plan & Exhibitor List Exhibiton Directory Exhibitors Numerical Publications Industry and Social Tours Registration and Fees General Information 106 Location & Travel Hotel Details World PM2016 Congress and Exhibition Contents For further Information on World PM2016, please contact: European Powder Metallurgy Association Andrew Almond (Exhibition Manager) or Kate Blackbourne (Congress Manager) or Scarlett Williams (Event Assistant) T: E: worldpm2016@epma.com W: For Registration and Hotel Enquiries: AIM Group International Vienna Office - Kristina Kádeková or Alexandra Seppi T: or +43 (01) E: worldpm2016@aimgroup.eu The EPMA reserves the right to make changes to the final programme. All programme timings, content and fees correct at time of creation. This electronic version was last updated on Cover Images: Deere & Company, TotalPics 3

4 About World PM2016 Congress and Exhibition About World PM2016 The World PM Congress is the foremost event for the international powder metallurgy community, and provides the focal point for industry personnel, researchers, and suppliers to meet, network and develop their business. The programme will include over 450 technical papers presented in oral and poster sessions, including EPMA Keynote Paper Award presentations, as well as, five in-depth Special Interest Seminars. Details of the full programme can be found on the following pages and on our website: The World PM2016 social programme will give delegates additional opportunities to network, and will include Welcome and Official receptions and a Gala Dinner. Congress Organiser World PM2016 is sponsored and organised by the European Powder Metallurgy Association (EPMA), in co-operation with key members of the PM fraternity in Germany and worldwide, and the support of: Fachverband Pulvermetallurgie (FPM), Metal Powder International Federation (MPIF), Japan Powder Metallurgy Association (JPMA) and Asian Powder Metallurgy Association (APMA). Founded in 1989, EPMA is the leading PM trade association representing the interests of the entire European PM community, and promoting PM technology throughout the world. EPMA members will qualify for special discounts on their registration fees, and further information on membership and EPMA s services can be found at 4 More details and up-to-date information can be found at:

5 Congress Chairman Dr Michael Krehl Consultant MSG Consulting, Germany World PM2016 Congress and Exhibition Dr Michael Krehl, founder and owner of the consulting company MSG, previously Chairman of the management board and CEO of PMG Holding GmbH until November He was responsible for the PMG Group since Before joining the PMG group (at that time Sinterstahl GmbH) in 1996 as managing director of the Fssen plant he worked for four years as divisional manager at Degussa Electronics Inc. in the USA and 6 years as manager of the PM division at SHW GmbH. Dr Krehl studied materials science at Technical University Stuttgart and received his master and doctorate degrees working at Max-Planck-Institute for materials science on the topic of powder metallurgy of the refractory metals niobium and tantalum. For many years Dr Krehl was chairman of the German Fachverband Pulvermetallurgie (PM industry federation) and vice president of the Wirtschaftsverband Stahl- und Metallverarbeitung (industry federation for steel and metalworking). He also published approx. 30 papers in the areas of refractory metals, powder metallurgy and production technology. Congress Chairman Welcome to Hamburg! 5

6 Steering Committee World PM2016 Congress and Exhibition World PM2016 Steering Committee The World PM2016 Steering Committee is chaired by: Prof Dr.-Ing. Christoph Broeckmann Head of Institute RWTH Aachen University, Germany Dr Steven Moseley Chief Scientist Hilti AG, Liechtenstein Dr Lionel Aboussouan Mr Andrew Almond Dr Volker Arnhold Miss Kate Blackbourne Prof Christoph Broeckmann Dr Olivier Coube Dipl.-Ing. Ingo Cremer Prof Herbert Danninger Dr Klaus Dollmeier Mr Harald Fritzges Mr Philippe Gundermann Mr Peter Henning Mr Dirk Hoelscheid Mr Peter Kjeldsteen Dr Michael Krehl Mr Lutz Lackner Mr Sten Millot Prof Alberto Molinari Dr Cesar Molins Dr Steve Moseley Dr Harald Neubert Mr Norbert Nies Prof Frank Petzoldt Mr Michael Rehnig Dr Henk van den Berg Dr Klaus Vossen Miss Scarlett Williams EPMA, United Kingdom EPMA, United Kingdom EPMA, Germany EPMA, United Kingdom RWTH Aachen, Germany EPMA, France Cremer Thermoprozessanlagen GmbH, Germany TU Vienna, Austria GKN Sinter Metals Engineering GmbH, Germany Schunk Gießen, Germany Eramet, France Avure Technologies AB, Sweden Fachverband Pulvermetallurgie, Germany Sintex a/s, Denmark MSG Consulting, Germany Dorst Technologies, Germany FJ Industries, Denmark Trento University, Italy AMES SA, Spain Hilti AG, Liechtenstein Miba Sinter Austria GmbH, Austria SMS Meer GmbH, Germany Fraunhofer Institut IFAM, Germany Höganäs AB, Sweden Kennametal Shared Services GmbH, Germany Hoeganaes Corporation Europe GmbH, Germany EPMA, United Kingdom The EPMA would like to express its gratitude to the Steering Committee Members for their generous help and support during the organisation of the event. 6

7 Technical Programme Committee Chairman: Prof Dr.-Ing. Frank Petzoldt Deputy Institute Director Head of Powder Technology Department Fraunhofer IFAM, Germany World PM2016 Congress and Exhibition Programme Committee Dr Marco Actis Grande Dipl.-Ing. Claus Aumund-Kopp Prof Thierry Barrière Dr Frank Baumgaertner Prof Paul Beiss Dr Pierre Blanchard Dr Martin Bram Prof Christoph Broeckmann Mr Ralf Carlström Prof Efrain Carreño-Morelli Prof Francisco Castro Mr Dov Chaiat Dr Ilaria Cristofolini Prof Herbert Danninger Dr Magdalena Dlapka Dr Klaus Dollmeier Dr Mark Dougan Dr John Dunkley Dr Thomas Ebel Dr Ulf Engström Dr Eberhard Ernst Dr Luc Federzoni Mr Andreas Fölzer Mr Philippe François Dr Karin Frisk Dr Luz Fuentes Pacheco Dr José Garcia Dr Christian Gierl-Mayer Dr Elena Gordo Mr Timothy Hale Dipl.-Ing. Johannes Heyde Dr Johan Hjärne Dr Bjoern Hoschke Dr Edmund Illia Dr Iñigo Iturriza Dr Anke Kaletsch Prof Jan Kazior Prof Bernd Kieback Mr Peter Kjeldsteen Dipl.-Ing. Lutz Lackner Mrs Caroline Larsson Politecnico di Torino, Italy Fraunhofer IFAM, Germany University of Franche-Comte, France Schunk Sintermetalltechnik GmbH, Germany RWTH Aachen IWM, Germany Erasteel Kloster AB, Sweden Forschungszentrum Jlich GmbH, Germany RWTH Aachen IWM, Germany Höganäs Sweden AB, Sweden University of Applied Sciences, Switzerland CEIT, Spain TPT - Tungsten Powder Technology, Israel Trento University, Italy Vienna Technical University, Austria MIBA Sinter Austria, Austria GKN Sinter Metals Engineering GmbH, Germany AMES SA, Spain Atomising Systems Ltd, United Kingdom Helmholtz-Zentrum Geesthacht, Germany Höganäs AB, Sweden GKN Sinter Metals Engineering GmbH, Germany CEA Grenoble, France Boehler Uddeholm Powder Technology, Austria Rio Tinto GmbH, Germany Swerea KIMAB AB, Sweden PMG Polmetasa, Spain Sandvik Machining Solutions, Sweden Vienna Technical University, Austria Madrid University Carlos III, Spain Hoeganaes Corporation, USA Schunk Sintermetalltechnik GmbH, Germany Quintus Technologies AB, Sweden Kennametal Shared Services GmbH, Germany Metaldyne, USA CEIT, Spain RWTH Aachen University IWM, Germany Cracow University of Technology, Poland Fraunhofer-IFAM Dresden, Germany Sintex a/s, Denmark Dorst Technologies, Germany Höganäs AB, Sweden 7

8 Programme Committee World PM2016 Congress and Exhibition Mr Christoph Laumen Linde Gas, Germany Prof Dr Jai-Sung Lee Hanyang University, Korea Dr Bruce Lindsley Hoeganaes Corporation, USA Prof Luis Miguel Llanes Catalunya Univ Polytecnica, Spain Dipl.-Ing. Marko Maetzig ARBURG GmbH + Co KG, Germany Dr Bernhard Mais ECKA Granules Germany GmbH, Germany Dr José Manuel Martín CEIT, Spain Prof Alberto Molinari Trento University, Italy Dr Steven Moseley Hilti AG, Liechtenstein Dr Erich Neubauer RHP-Technology GmbH & Co KG, Austria Dr Salvator Nigarura PMG Holding GmbH, USA Prof Susanne Norgren Sandvik AB, Sweden Prof Radu Orban Cluj Napoca Technical University, Romania Dr Vladimir Paserin Rio Tinto Metal Powders - QMP, Canada Dr Carsten Peters Hilti AG, Liechtenstein Prof Frank Petzoldt Fraunhofer IFAM, Germany Dr Tadeusz Pieczonka Crakow University, Poland Dr Volker Piotter Karlsruhe Institute of Technology GmbH, Germany Dr Yoko Pittini-Yamada Meyer Sintermetall AG, Switzerland Dr Leo Prakash Kyocera Unimerco, Germany Prof Florian Pyczak Helmholtz-Zentrum Geesthacht, Germany Dipl.-Ing. Walter Rau DORST Technologies, Germany Mrs Adeline Riou Erasteel, France Dr José Manuel Sanchez CEIT, Spain Dr Andreas Schoppa PMG Fssen GmbH, Germany Mr Gerold Stetina Miba Sinter Austria GmbH, Austria Dr Yoshinobu Takeda Höganäs Japan KK, Japan Dr Henk van den Berg Kennametal Shared Services GmbH, Germany Prof Kim Vanmeensel KU Leuven, Belgium Dr Peter Vervoort Eisenmann Thermal Solutions GmbH, Germany Dr Bruno Vicenzi Clayver srl, Italy Dr Thomas Weissgaerber Fraunhofer IFAM, Germany Dr Lars Wimbert GKN Sinter Metals Engineering GmbH, Germany Dipl.-Ing. Matteo Zanon Pometon SpA, Italy Dr Andreas Zeller GKN Sinter Metals Engineering GmbH, Germany The EPMA would like to express its sincere thanks to the members of the Technical Programme Committee for their support and hard work in structuring the World PM2016 programme and also in advance to Session Chairmen for refereeing the submitted papers. 8

9 Congress Schedule World PM2016 Congress and Exhibition Registration, Technical Sessions, Special Interest Seminars and satellite meetings will all take place at Congress Centre Hamburg. Social events take place at the venue as indicated. Sunday 9 October Congress Registration (Congress Centre Hamburg (CCH)) EFFIPRO End Users Workshop European Structural Parts Group (ESPG) General Open Meeting Congress Schedule European Metal Injection Moulding Group (EuroMIM) Meeting (by invitation) European Metal Injection Moulding Group (EuroMIM) Open Meeting World PM2016 Welcome Reception (CCH) (Sponsored by Höganäs AB, Sweden) Monday 10 October Congress Registration/Information Desk Open Opening Plenary Session including presentation of EPMA Awards: PM Thesis Awards (sponsored by Höganäs AB) PM Component Awards Keynote Paper Awards (sponsored by Taylor & Francis) Distinguished Service Award Exhibition Open Exhibition/Poster Time and Delegate Lunch Technical Sessions: Session 1: AM - Properties of Lightweight Materials I Session 2: Gas Atomisation Including Keynote Session 3: Transportation Applications Session 4: MIM Quality Improvement Session 5: Hard Materials: Processing I Session 6: Powder Pressing European Structural Parts Group (ESPG) Parts Makers Meeting (by invitation) Refreshment Break Technical Sessions: Session 7: AM - Powder Bed Based Technologies I Session 8: Powder Characterisation I Session 9: Hard Materials: Processing II Session 10: HIP - Production Session 11: Foams Session 12: Refractory Materials I Session 13: MIM High Temperature Materials Official Reception (Handelskammer) 9

10 Congress Schedule World PM2016 Congress and Exhibition Tuesday 11 October Congress Registration/Information Desk Open Technical Sessions: Session 14: AM - Powder Recycling & Aging Including Keynote Session 15: Powder Characterisation II Session 16: Compaction Simulation Session 17: Hard Materials: Modelling Session 18: PM Lightweight Materials Session 19: Refractory Materials II Session 20: Steel Sintering European PM Hot Isostatic Pressing Group (EPHG) Meeting (by invitation) Exhibition Open Refreshment Break Technical Sessions: Session 21: AM - Powder Bed Based Technologies II Session 22: HIP - Process Including Keynote Session 23: Shaping Session 24: Sintering Simulation Session 25: Lightweight MMCs Session 26: MIM Titanium I Including Keynote Session 27: Fatigue I European Hard Materials Group (EHMG) Open Meeting Exhibition/Poster Time and Delegate Lunch Research and Development Network RADNET Lunch Meeting (by invitation) EPMA Member Meet and Greet Technical Sessions: Session 28: Dimensional Control in Sintering Session 29: Liquid Phases in Sintering Session 30: Hard Materials: Characterisation & Properties I Including Keynote Session 31: MIM of Titanium and other Advanced Materials Session 32: Magnetic Materials I Session 33: Fatigue II Special Interest Seminar: Session 34: Hot Isostatic Pressing SIS European Additive Manufacturing Group Open Meeting Refreshment Break Technical Sessions: Session 35: AM - Powder Characteristics Session 36: Improvements in Sintering Session 37: Hard Materials: Characterisation & Properties II Session 38: HIP Properties Session 39: Magnetic Materials II Session 40: MIM Materials for Special Applications Session 41: Heat Treatment World PM2016 Gala Dinner Cruise on the River Elbe

11 Wednesday 12 October Congress Registration/Information Desk Open Technical Sessions: Session 42: AM - Properties of Lightweight Materials II Session 43: Sintering Atmospheres Session 44: Spark Plasma Sintering I Session 45: Hard Materials: Cermets Session 46: Functional Materials I Session 47: MIM Iron and Steel Session 48: Stainless Steels World PM2016 Congress and Exhibition Congress Schedule Exhibition Open Refreshment Break Technical Sessions: Session 49: AM - Special Aspects in AM Technology Session 50: AM - Special Powder & Materials Session 51: Spark Plasma Sintering II Session 52: Hard Materials: Alternative Binders Session 53: Biomedical Applications Session 54: Iron Based MMCs Session 55: Low Alloy Steels Exhibition/Poster Time and Delegate Lunch, including World PM2018 Launch Technical Sessions: Session 56: AM - Special Aspects in AM Powders Session 57: AM - Properties of High Performing Alloys Session 58: Secondary Operations Session 59: Hard Materials: Coatings Session 60: Functional Materials II Session 61: Structural Parts Including Keynote Session 62: PIM Advanced Materials and Processes Refreshment Break Technical Sessions: Session 63: AM - Deposition Technologies Session 64: AM - Properties of Stainless Steels Session 65: Quality Inspection Session 66: Machining Session 67: Hard Materials: Applications Session 68: High Entropy Materials Including Keynote Session 69: PM Gears Exhibition and Poster Networking 11

12 Congress Schedule World PM2016 Congress and Exhibition Thursday 13 October Congress Registration/Information Desk Open Special Interest Seminars: Global Progress of Metal Additive Manufacturing part 1 90 Years of Cemented Carbides Past, Present and Future part 1 A Global View on Metal Injection Moulding: Case Studies from Asia, Europe and North America part 1 New Trends in the Automotive Drivetrain and Powertrain and their Impact on the Future of Powder Metallurgy Applications part Exhibition Open Refreshment Break Special Interest Seminars: Global Progress of Metal Additive Manufacturing part 2 90 Years of Cemented Carbides Past, Present and Future part 2 A Global View on Metal Injection Moulding: Case Studies from Asia, Europe and North America part 2 New Trends in the Automotive Drivetrain and Powertrain and their Impact on the Future of Powder Metallurgy Applications part Exhibition/Poster Time and Delegate Lunch Industry and Social Tours: Tour to Blohm+Voss Tour to Helmholtz Zentrum Geestacht Tour to Laser Centrum Nord Tours to Airbus Tour to Lufthansa Technik Tour to Miniatur Wunderland Friday 14 October Tour to Montblanc 12 All timings, meetings, technical sessions, social events and tours included in this publication are subject to change. The final programme and precise timing of all events and activities scheduled for World PM2016, together with a definitive listing of papers to be presented in the technical sessions, will be published in the World PM2016 Congress Guide which will be distributed to delegates onsite in Hamburg. Registered delegates will also be able to browse the congress guide in advance on our mobile app. Access details will be sent to registered participants in advance of the event.

13 EPMA Sectoral Groups World PM2016 Congress and Exhibition EPMA Working and Sectoral Groups focus on issues best handled at industry rather than company level. More information about the groups below can be found at Each group identifies and promotes the interests of EPMA members in its area by providing the forum for the discussion of key issues, providing the industry voice to the wider world, and initiating collaborative projects. Meetings are planned as follows: Sectoral Groups European Additive Manufacturing Group (EAMG) Tuesday 11 October, open meeting European Hard Materials Group (EHMG) Tuesday 11 October, open meeting European MIM Group (EuroMIM) Sunday 9 October, (by invitation) Sunday 9 October, open meeting European PM Hot Isostatic Pressing Group (EPHG) Tuesday 11 October, (by invitation) European Structural Parts Group (ESPG): General Open Meeting Sunday 9 October, Parts Makers Meeting Monday 10 October, (by invitation) Research and Development Network (RADNET): Tuesday 11 October, (by invitation) Please tick the relevant section of the online Registration Form to receive further information on these meetings and/or to register your attendance for the meeting. Agendas will be available on in due course. Register today at: 13

14 Congress Schedule World PM2016 Congress and Exhibition World PM2016 Exhibition and Poster Networking Evening Wednesday 12 October Exhibition Hall, Congress Centre Hamburg The World PM2016 Exhibitors and Poster Authors have the pleasure to invite you to attend the World PM2016 Exhibition and Poster Networking Evening. Taking place after the official exhibition hours will allow delegates, exhibition visitors and exhibition personnel to socialise and network with old friends and make new acquaintances in a more informal environment. 14

15 EFFIPRO End Users Workshop Sunday 9 October The EFFIPRO project started in September 2013 with the participation of 8 consortium members: TECNALIA (Project Leader), The University of Seville, Fraunhofer IFAM, EPMA, MIRTEC, KYOCERA Unimerco, AMES and Airbus Group. The main aim was to develop a significantly shorter PM process using a new concept of hybrid electrical current assisted sintering and hard materials with improved properties, this resulting in a more energy efficient and cost effective process. An end users workshop will be held by partners of the consortium to inform interested parties about the project results on Sunday 9 October, at the Congress Centre Hamburg. Preliminary Programme: Introduction to EFFIPRO Project: Dr. Iñigo Agote (TECNALIA) Field Assisted Sintering Technologies (FAST) Opportunities and Current Status: Prof. Dr. José Maria Gallardo (University of Seville) Analytic Methods Applied for Characterization of Defect in PM Parts: Dr. Miguel Lago Gomez (TECNALIA) Die Materials for EFFIPRO: Dr. Dia Andreouli (MIRTEC) Benchmarking Conventional/FAST Processes: Dr.-Ing Thomas Schubert (Fraunhofer IFAM, Dresden) Case Studies (Hard Metal Parts): Dr.-Ing Leo Prakash (KYOCERA UNIMERCO) Q&A session: All End of EFFIPRO End Users Workshop If you are interested in attending, tick the box on the online World PM2016 registration form. More information can be found on The EFFIPRO project is being part funded by the European Commission in the 7th Framework Programme (Contract # NMP2-SL ). Image courtesy of KYOCERA 15

16 World PM2016 Opening Plenary Session Monday 10 October, Welcome from Congress Chairman: Dr Michael Krehl (Consultant, MSG Consulting, Germany) Global Reviews on the Powder Metallurgy Industry: Plenary Session A Review Of The PM Industry From The European Perspective by Mr Philippe Gundermann, EPMA President (Vice President Strategy, and Financial Communication, ERAMET GROUP, France) Overview Of PM Activities In North America by Mr Patrick J. McGeehan, MPIF President (Vice President & General Manager, Ametek, Inc., USA) Overview Of PM Activities In The Far East by Mr Isamu Kikuchi, JPMA & APMA President (Chairman of PORITE Corporation, Japan) Plenary Speaker: Current And Future Application Of Powder Metallurgical Materials In The Automotive Industry by Dr. Oliver Schauerte Group Research, Head of Materials Research and Manufacturing Processes, Volkswagen AG, Germany Although not really well known as structural materials in automotive production, powder metallurgical materials have played a key role in the manufacturing of high strength and highly stressed automotive components for many decades. Typical applications are mainly found in the drivetrain, such as sprocket wheels, various components in the valvetrain, flanges, and many applications in the gear box. Small, highly abrasive loaded components are also in use in the interior or the chassis. However, components made by powder metallurgy are mostly hidden in larger assemblies, often supplied by tier 2 or tier 3 manufacturers. This leads to a disadvantageous lack of attention given to this manufacturing technology and its potentials through the car manufacturers. New demands for more fuel economy and lightweight design and also the challenges resulting from the rising demand for electrical drivetrains, give new perspectives for powder metallurgy. For example: beside the ongoing demand for new materials with improved mechanical and abrasive properties, the need for high performance soft and hard magnets in electrical drivetrains, powder applications in battery systems, especially the latest developments in additive manufacturing, allowing bionically optimised lightweight components and also new approaches in tool making and low volume variants. This technology is of growing importance and the powder properties are significantly influencing the material behaviour and they are also the most significant cost factor for metal based additive manufactured parts, so that improvements in metal powders and in processing technology enable new perspectives for powder metallurgy. The presentation will give an overview on the current applications for automotive applications made by powder metallurgy, its potential considering the new challenges for the automotive industry and new fields of application like magnets and powders for additive manufacturing. 16

17 Plenary Speaker: Hydrogen - A New Vector For Our Future Energy System by Dipl. -Ing. Roland Käppner Head of Business Development & Sales Thyssen Krupp Industrial Solutions AG, Germany With the unstoppable dawn of the fossil and the parallel rise of the renewable energy age, hydrogen seems to be an obvious candidate to become one of the most important energy vectors of the future, and potentially a key element for a cleaner, safer and more sustainable world. The need to decarbonize our planet s environment, the challenges for our existing energy infrastructure imposed by renewables and finally the quantum leaps in materials and production technologies will open a new era of hydrogen energy driven products, systems and solutions. Presentation of the 2016 EPMA Awards: Plenary Session PM Thesis Awards (Prize sponsored by Höganas AB) PM Component Awards Keynote Paper Awards (Prize sponsored by Taylor & Francis) Distinguished Service Award 17

18 The EPMA Keynote Paper Award 2016 Keynote papers receive an extended oral presentation slot in the programme and will go on to be published in the journal Powder Metallurgy. The award is sponsored by Taylor & Francis Group. The EPMA Keynote Papers for World PM2016 are: Monday 10 October Keynote Paper Award Tuesday 11 October A Novel Convergent-Divergent Annular Nozzle Design for Close-Coupled Atomization by Dipl. -Ing Daniel Schwenck (University of Bremen, Germany) Investigations of Aging Behaviour from Aluminum Powders During Atmosphere Simulation of the LBM Process by Dipl. -Ing Dominik Bauer (Airbus Group Innovations, Germany) Phase Transformation Under Isostatic Pressure in HIP by Mr Alexander Angré (Swerea KIMAB, Sweden) Reduction of the Embrittlement Effect of Binder Contamination in MIM Processing of Ti-Alloys by Dr Thomas Ebel (Helmholtz- Zentrum Geesthacht, Germany) EBSD Study of WC Grain Boundaries in WC-Co Alloys. Effect of Co Content and Carbon Potential by Dr Jean-Michel Missiaen (Grenoble INP, France) Wednesday 12 October Development of Synchronizer Hub with Helical Gear for DCT by Mr Yuu Akiyama (Sumitomo Electric Sintered Alloy Ltd, Japan) High-Entropy Alloy CoCrFeMnNi Produced by Powder Metallurgy by Dipl. -Ing Nadine Eißmann (Technical University Dresden, Germany) 18

19 Technical Sessions 2016 World PM2016 Congress and Exhibition Keynote and Papers, together with Special Interest Seminars, will be integrated into a 4-day programme of presentations. Poster papers will be displayed in a specially designated area in the exhibition hall for the duration of the event. The full programme of papers accepted by the Technical Programme Committee can be found on the following pages. Monday Afternoon, 10 October, Part I Session 1: AM - Properties of Lightweight Materials 1 Binder Development For Binder Jetting-Based Additive Manufacturing Of Ceramics Atre, S; Kate, K; Porter, J (University of Louisville United States) Dr Thomas Weissgaerber (Fraunhofer-IFAM, Dresden) Dr Rajiv Tandon (Magnesium Elektron Powders, USA) Non-destructive Evaluation Of Internal Defects In Additive Manufactured Aluminium Pejryd, L; Karlsson, P (Örebro University Sweden) Hällgren, S (SAAB Dynamics Sweden) Kahlin, M (Saab Aeronautics Sweden) Effects Of Heat Treatments On A357 Alloy Produced By Selective Laser Melting Trevisan, F (Politecnico di Torino Italy) Calignano, F; Lorusso, M (Istituto Italiano di tecnologia (IIT) Italy) Pakkanen, J (Politecnico di Torino Italy) Ambrosio, E P; Manfredi, D (Istituto Italiano di tecnologia (IIT) Italy) Pavese, M; Fino, P (Politecnico di Torino Italy) Lombardi, M (DISAT Italy) The Role Of Melting Pool Boundary In The Determination Of Mechanical Property Of Al Alloys Made By Selective Laser Melting Yang, Y (Institute of Processing Engineering Chinese Academy of Sciences China) Qian, M (RMIT University Australia) 3D Screen And Stencil Printing: Real Mass Production For Metals, Ceramics And Their Combinations Studnitzky, T; Dressler, M; Jurisch, M; Reuter, K; Strauss, A; Riecker, S (Fraunhofer IFAM Dresden Germany) Poster Fatigue Damage Of Aluminum Alloy EN AW 2618A Produced By SLM Technology Mazal, P; Vlasic, F; Kratochvilova, V; Palousek, D; Koutny, D (Brno University of Technology Czech Republic) Mr Michael Marucci (Hoeganaes Corporation, USA) Prof Florian Pyczak (Helmholtz-Zentrum Geesthacht Germany) Keynote Paper A Novel Convergent-divergent Annular Nozzle Design For Close-coupled Atomization Schwenck, D (University Bremen Germany) Ellendt, N (Foundation Institute for Material Science Germany) Fischer- Bhner, J; Hofmann, P (INDUTHERM Erwärmungsanlagen GmbH Germany) Uhlenwinkel, V (Foundation Institute for Material Science Germany) Session 2 - Gas Atomisation Predicting The Effect Of Operational Parameters On The Particle Size Distribution Of Powders Produced By An Industrial Close-coupled Gas Atomiser Thompson, J; Rolland, S; Hassan, O; Sienz, J (Swansea University United Kingdom) Analysis Of Acoustic Emissions From Gas Atomisation Dunkley, J (Atomising Systems Limited United Kingdom) Mullis, A (Leeds University United Kingdom) Preparation Of Fine Metal Powders Using Modified Gas Atomization Process Yang, S; Yang, D Y; Kim, K B; Lim, T S; Kim, Y J (KIMS Korea, Republic of) Technical Programme Influence Of Selective Laser Melting Process Parameters On Impact Resistance Of Lattice Structure Made From AlSi10Mg Vrana, R; Koutny, D; Palousek, D; Zikmund, T (Brno University of Technology Czech Republic) 19

20 Session 3: Transportation Applications Optimizing Particle Segregation In The Metal Injection Molding Process Gebauer, T (SIGMA Engineering GmbH Germany) Technical Programme Dr Martin Bram (Forschungszentrum Jlich GmbH, Germany) Dr Elena Gordo (Madrid University Carlos III, Spain) High Performance Sintered Aluminium For Automotive Hydraulics Kruzhanov, V (PM Consulting Germany) Wimbert, L (GKN Sinter Metals Engineering GmbH Germany) Mais, B (ECKA Granules Germany GmbH Germany) Development Of Long-term Stable Cathodes For Metal-supported Solid Oxide Fuel Cells Bram, M; Udomsilp, D; Beez, A; Roehrens, D; (Forschungszentrum Jlich Germany) Brandner, M (Plansee SE Austria) Menzler, N H (Forschungszentrum Jlich Germany) Observation Of An Orthorhombic Phase Formation In An Advanced Powder Processed High Niobium Containing ɣ- TiAl Alloy Rackel, M W; Stark, A; Gabrisch, H; Schimansky, F P; Schell, N; Schreyer, A; Pyczak, F (Helmholtz-Zentrum Geesthacht Germany) Gas Atomised Iron-Based Metallic Glass Powder For Erosion And Corrosion Resistant Protective Coating Su, L T; Lek, J Y; Tan, T M; Yin, X J (Singapore Polytechnic Singapore) Chong, S S; Chan, J K W; Kwok, R W O (Singapore Technologies Kinetics Ltd Singapore) Control The Deformation Of MIM Parts By The Powder Size Distribution Osada, T; Tsumori, F; Kudo, K; Hashikawa, R; Miura, H (Kyushu University Japan) Influence Of Process Parameter On The Quality Of MIM Parts Walcher, H; Maetzig, M; Knöpfle, C (ARBURG GmbH + Co KG Germany) Colony Refinement Of MIM-processed Ti-6Al-4V By Addition Of Different Yttrium Compounds Limberg, W; Ebel, T; Pyczak, F (Hemholtz-Zentrum Geesthacht, Germany) Poster Consolidation And Mechanical Properties Of Powder Injection Molded Ti-6Al-4V Components Using Prealloyed Powders Hong, S H; Kim, Y; Lee, J; Ryu, H J (Korea Advanced Institute of Science and Technology Korea, Republic of) Chung, S T; Kwon, Y S (Cetatech Co. Korea, Republic of) Digital Tools For Design-to-Manufacturing With Metal Injection Molding Atre, S; Kate, K; Jung, I (University of Louisville United States) Session 5: HM - Processing 1 Poster Combining Metal Textiles With Ceramics By Injection Molding For Novel Composites With Promising Properties Gnther, A; Moritz, T; Mller-Köhn, A (IKTS Germany) Session 4: MIM Quality Improvement Prof Thierry Barrière (University of Franche-Comte, France) Dr Volker Piotter (Karlsruhe Institute of Technology GmbH, Germany) Prof Walter Lengauer (Vienna University of Technology, Austria) Dr Siavash Momeni (Hilti AG, Liechtenstein) Rheometer-based Characterization Of Hardmetal And Refractory Metal Powders For Calibrating Discrete Element Method Models Grohs, C (Plansee SE Austria) Schäfer, C; Schleinkofer, U (CERATIZIT Austria GmbH Austria) Plankensteiner, A (Plansee SE Austria) 20

21 Development Of The Hybrid ERS Process For The Fabrication Of Hardmetals Lagos, M A; Agote, I; (TECNALIA Spain) Gallardo, J M; Montes, J M (University of Seville Spain) Schubert, T; Weissgaerber, T (IFAM - Fraunhofer Germany) Prakash, L (UNIMERCO Denmark) Andreouli, C DOikonomou, V (MIRTEC Greece) Lopez, D; Calero, J A (AMES Spain) Manufacturing And Properties Of Polycrystalline WC-Co Based Cemented Carbides Pötschke, J; Richter, V; Mayer, M (Fraunhofer IKTS Germany) World PM2016 Congress and Exhibition Prof Paul Beiss (RWTH Aachen IWM, Germany) Mr Philippe François (Rio Tinto GmbH, Germany) Session 6: Powder Pressing Novel WC Hardmetal With Cr/Fe Binder Alloy Sintered By SPS García-Junceda, A; Sáez, I (IMDEA Materials Institute Spain) Torralba, J M (Universidad Carlos III Madrid Spain) Poster Comparison Of Hard Metals Fabricated By Electrical Resistance Sintering (ERS) And Sinter-HIP Schubert, T (Fraunhofer IFAM-DD Germany) Lagos, M A; Agote, I (Fundacion Tecnalia Research & Innovation Spain) Weißgärber, T (Fraunhofer IFAM-DD Germany) Gallardo Fuentes, J M; Montes, J M (University of Seviile Spain) Prakash, L (Kyocera Unimerco Tooling AS Denmark) Influence Of The Particle Size And Raw Materials In W-Cu Alloys Manufactured Via Rapid Sinter Pressing Arevalo, C (University of Seville Spain) Neubauer, E (RHP- Technology GmbH Austria) Montealegre-Meléndez, I; Escoz, D (University of Seville Spain) Kitzmantel, M (RHP-Technology GmbH Austria) Simulation Tool Developed For Electrical Resistance Sintering (ERS). Application To Hard Metals Montes, J M; Gallardo-Fuentes, J M (University of Seville Spain) Schubert, T (Fraunhofer IFAM Germany) Cintas, J; Torres, Y (University of Seville Spain) Cuevas, F G (University of Huelva Spain) Weissgaerber, T (Fraunhofer IFAM Germany) New Type Of Servo-electrical Press Lackner, L (Dorst Technologies GmbH & Co. KG Germany) Warm Die Compaction Of A High Density Crankshaft Sprocket Hanejko, F (Hoeganaes Corporation United States) Study Of The Behaviour Of Low Alloy Steel Powder During Uniaxial Cold Compaction By Means Of Single Action Tests Cristofolini, I (University of Trento Italy) Pederzini, G; Rambelli, A (Sacmi Imola S.C. Italy) Molinari, A (University of Trento Italy) Poster The Behavior Of Lubricant During Compacting And Sintering In High Density PM Parts And Their Influences On Properties Nie, J; Feng, W; Bao, C; Cao, Y (NBTM New Materials Group Co., Ltd. China) Nickel Coating on aluminum by Hot Pressing Yamanoglu, R (Ridvan 9701 Turkey) Efendi, E (Kocaeli University Turkey) Sponsored by Technical Programme Homogenization Of Tungsten Carbide Nanoparticles With Cobalt For Wear Parts Stanciu, V L; Vitry, V; Delaunois, F (University of Mons Belgium) High Pressure Assisted WC/ Co Hardmetal Sintering Mashhadikarimi, M; Umbelino Gomes, U (Federal University of Rio Grande do Norte Brazil) Picanco Oliveira, M; Da Silva Guimarães, R; Filgueira, M (State Universty of North Fluminense Brazil) Welcome Reception Delegates are invited to meet with friends and colleagues at the annual Welcome Reception to be held at the Congress Centre Hamburg on the evening of Sunday 9 October. Attendees will enjoy a geographical journey across Germany with the food and drink specially selected to showcase Germany on our world stage. Additional tickets can be purchased during the online registration process for Exhibitors and spouses. Andy McLeish

22 Monday Afternoon, 10 October, Part 2 Mr Dov Chaiat (TPT Tungsten Powder Technology, Israel) Mr Christoph Laumen (Linde Gas, Germany) Session 7: AM - Powder Bed Based Technologies 1 Nanometric Surface Modification Of Iron And Steel Powders Vintila, R (Concordia University Canada) Aguirre-Perales, L; Paserin, V (Rio Tinto Iron & Titanium- Metal Powders Canada) Drew, R (Concordia University Canada) Influence Of Cr Alloying Content On The Surface Oxide Composition In Case Of Water-atomized Steel Powder Shvab, R; Hryha, E (Chalmers University of Technology Sweden) Chasoglou, D; Bergman, O (Höganäs AB Sweden) Nyborg, L (Chalmers University of Technology Sweden) Technical Programme Challenges And Opportunities In The Fabrication Of Injection Mold Tooling Using Direct Metal Laser Sintering Atre, S; Irrinki, H; Kate, K; Knadler, D (University of Louisville United States) Selective Laser Melting Of Magnesium Alloys Jauer, L; Meiners, W (Fraunhofer Institute for Laser Technology ILT Germany) Vervoort, S (RWTH-Aachen University Germany) Gayer, C (Fraunhofer Institute for Laser Technology Germany) Zumdick, N; Zander, D (RWTH Aachen Germany) Additive Manufacturing By Selective Laser Melting (AM-SLM) Of Thin-Walled AlSi10Mg Containers: Structural Characterization And Electron Beam Welding (EBW) Rosenthal, I; Nahmany, M; Uzan, N; Stern, A; Frage, N (Ben Gurion University of the Negev Israel) Additive Manufacturing By Solvent Jetting On Granule Beds Carreno-Morelli, E; Rodriguez-Arbaizar, M; Flueckiger, G; Cachelin, C (University of Applied Sciences and Arts Western Switzerland Switzerland) Dr Volker Arnhold (Powder Metallurgy Solutions, Germany) Dr Bruce Lindsley (Hoeganaes Corporation, USA) Session 8: Powder Characterisation 1 Surface Oxides On Metal Powders: An Overview Of The Effect Of Alloy Composition And Manufacturing Method Hryha, E; Nyborg, L (Chalmers University of Technology Sweden) Surface Characterization Of 60Cu-40Sn Bronze Powder Shvab, R; Hryha, E; (Chalmers University of Technology Sweden) Tahir, A M (3M Västervik Sweden) Nyborg, L (Chalmers University of Technology Sweden) Poster Innovative Determination Of C, S, O, N And H In Inorganic Powders Jung, M (Elementar Analysensysteme GmbH Germany) Effect Of Oxidation Of Iron Powder On Microstructure And Mechanical Properties Of Sintered Steels Bao, C; Qin, X; Feng, W; Zhao, W (NBTM New Materials Group Co., Ltd. China) Prof Herbert Danninger (Vienna Technical University, Austria) Dr Sabine Lay (INP Grenoble, France) Session 9: HM Processing II Impact Of Chromium On The Magnetic Properties Of Wc-Co Hardmetals Mårtensson, M; Norgren, S (Sandvik Sweden) Metallurgy And Properties Of Mo-doped WC-Co And (W,Mo)C-Co Hardmetals Schwarz, V (TU Vienna Austria) Lengauer, W (TU Vienna Austria) Recent Advances In Ruthenium Containing Hardmetals Mehrotra, P; Trivedi, P; Roder, G (Kennametal GmbH & Co.KG Germany) 22

23 Wettability Of WC By Liquid Co-based Binders In Hardmetals: Is It Complete For All Carbon Contents? Konyashin, I; Konyashin, I; Ries, B (Element Six GmbH Germany) Zaitsev, A; Levashov, E (National University of Science and Technology MISIS Russian Federation) Mazilkin, A; Straumal, B (Institute for Solid State Physics Russian Federation) Konishchev, S (National University of Science and Technology MISIS Russian Federation) Poster Impulse Loading Methods For Developing Max Phase Powder Sudnik, L (SSSE Research Institute of Pulse Processes with Pilot Plant Belarus) Prikhna, T (V. Bakul Institute for Superhard Materials Ukraine) Luchenok, A; Kolodkevich, Y; Tkachuk, V (SSSE Research Institute of Pulse Processes with Pilot Plant Belarus) Production Of HWTS ( AISI H13 ) Matrix Composite Reinforced With Partially Stabilized Zirconia Deirmina, F; Pellizzari, M (University of Trento Italy) New Types And Technologies For Screpers Based On Materials Obtained Through PM Besleaga, C; Negriu, R M; Badea, S G (Econet Prod Bucharest Romania) Miculescu, M (Univerity Politehnica of Bucharest Romania) World PM2016 Congress and Exhibition Reaching Full Density Of 100Cr6 PM Steel By Capsule Free Hot Isostatic Pressing Of High-velocity Compacted Material Magnusson, H; Frisk, K (Swerea KIMAB Sweden) Hryha, E; Vattur Sundaram, M (Chalmers University of Technology Sweden) Åslund, C (Metalvalue / Bofors Bruk Sweden) Bengtsson, B O (Carpenter Powder Products AB Sweden) Ahlfors, M (Quintus Technologies Sweden) Wiberg, S (Linde Gas Sweden) Distribution Of Argon Within Capsules During Hot Isostatic Pressing For Duplex/Super Duplex Stainless Steel Fredriksson, W; Bengtsson, I (Bodycote HIP Sweden) Detecting Argon Trapped In Reference Samples Made By Hot Isostatic Pressing Mellin, P (Swerea KIMAB Sweden) Östlund, M (AB Sandvik Materials Technology Sweden) Fredriksson, W (Bodycote Hot Isostatic Pressing AB Sweden) Pellegrini, C (Erasteel Kloster AB Sweden) Blom, H (Carpenter Powder Products AB Sweden) Strondl, A (Swerea KIMAB Sweden) Session 11: Foams Technical Programme Synthesis Of Grain Size Gradients WC-Co Cemented Carbides By Liquid Permeation Method Chao, L; Wen Qiang, L; Hong BO, N; Xiao, W; Yang, Y (China National R&D Center For Tungsten Technology / Xiamen Tungsten Co.LTD. Technology Center China) Dr Susan Davies (Bodycote, UK) Mr Andreas Fölzer (Boehler Uddeholm Powder Technology, Austria) Session 10: HIP - Production Near Net Shape Fabrication Of Impeller By HIP Geneves, T (AREVA NP France) Picque, B (Aubert & Duval France) Delon, C (Compose France) Bernard, F (Université de Bourgogne France) Chatain, R (Arts France) ERNOULT, G (VENTANA Group France) ROUX, G (CEA France) FERRIERE, R (METALSCAN France) Dipl Ing Olaf Anderson (Fraunhofer IFAM, Germany) Dr Ravi Bollina (Mahindra Ecole Centrale, India) Machinable Porous Gold Structures For Decorative Applications Made Via Liquid Phase Sintering Andersen, O; Kostmann, C; Quadbeck, P (Fraunhofer IFAM Germany) Diologent, F; Colas, D (VV, Branch of Richemont International SA Switzerland) Kieback, B (Technical University of Dresden Germany) Sintering Behavior And Mechanical And Microstructural Properties Of Highly Porous Ti6Al4V Powder Materials Cabezas Villa, J L; Olmos, L; Lemus Ruiz, J (Universidad Michoacana de San Nicolás de Hidalgo Mexico) Bouvard, D (Univ. Grenoble Alpes France) Ti6Al4V Porous Structures By Gel Casting And Additive Manufacturing Technologies Biasetto, L (University of Padova Italy) Guzi de Moraes, E (Federal University of Santa Catarina Brazil) Elsayed, H; Colombo, P; Bonollo, F (University of Padova Italy) 23

24 Technical Programme World PM2016 Congress and Exhibition Compressive Behaviour Of Al Alloys/Open Cell SIC Ti2AlC And Ti3SiC2 MAX Phase Foams: Processing, Porosity Characterization And Connection Between Processing Parameters And Porosity. Velasco, B (Universidad Carlos III Spain) Hutsch, T (Fraunhofer Institute for Manufacturing and Advanced Materials Germany) Gordo, E (Universidad Carlos III Spain) Weißgärber, T (Fraunhofer Institute for Manufacturing and Advanced Materials Germany) Tsipas, S (Universidad Carlos III Spain) Poster Development Of Porous Aluminum For Ebullient Cooling System Oshiyama, N; Koshita, H; Ishijima, Z (Hitachi Chemical. co. Ltd. Japan) Session 12: Refractory Materials I Dr Paula Alvaredo (Madrid University Carlos III, Spain) Dr Ilaria Rampin (Pometon Spa, Italy) Impact Of Hot Gas Atomization On Glass Forming Alloys Ciftci, N; Ellendt, N; Mädler, L; Uhlenwinkel, V (Foundation Institute of Materials Science Department of Production Engineering University of Bremen Germany) Poster SHS Synthesis, From Mechanically Activated Powdered Components Mixture, of Molybdenum Aluminide, Mo3Al, for Use At Extremely High Temperatures Orban, R L; Slomie, D; Orban, M; Lung, T; Neamtu, B (Technical University of Cluj-Napoca Romania Romania) Economical Processing Route Of ODS Material By Controlled Surface Oxidation Of Fe 9Cr Powder Lagerbom, J; Lindroos, T; Lintunen, P; Virta, J; Oksa, M; Metsäjoki, J; Ivanchenko, M (VTT Technical Research Centre of Finland Ltd Finland) FeAlCr/Al2O3 Powder For Oxidation Resistant Thermal Spray Coatings Talako, T (Powder Metallurgy Institute Belarus) Vitiaz, P (National Academy of Sciences of Belarus Belarus) Ilyushchenko, A; Letsko, A; Parnitsky, N (Powder Metallurgy Institute Belarus) Yakovleva, M (Institute for Problems of Materials Science of Ukraine Ukraine) Methods For Recovery And Purification Of Industrial Powder Waste Streams Moen, M; Halvorsen, T; Mørk, K; Velken, S (ReSiTec AS Norway) Sintering-dissolution Process For Manufacturing Ni-Based Superalloy Foams Gulsoy, O; Gulsoy, O (Marmara University Turkey) 24 Structural Evolution Of AlCrFeNiMn/Graphite During Mechanical Alloying From 5 To 40 Hours Popescu, G (University Politehnica Bucharest Romania) Csaki, I (Onicsa Romania) Matara, M (University Politehnica Bucharest Romania) Trusca, R (METAV CD Romania) Soare, V; Mitrica, D (INCDIMNR Romania) Design And Development Of A New High Entropy Alloy By PM Alvaredo Olmos, P; Prieto Muñoz, E M (Universidad Carlos III Spain) Guo, S (Chalmers University of Technology Sweden) Powder Metallurgical Processing Of Refractory High Entropy Alloys Kang, B C (Korea Advanced Institute of Science and Technology Korea, Republic of) Kuk, S W (Korea Atomic Energy Research Institute Korea, Republic of) Lim, W J; Ryu, H; Hong, S H (Korea Advanced Institute of Science and Technology Korea, Republic of) Official Reception The Official Reception will take place on the evening of Monday 10 October at the Handelskammer, Germany s oldest Chamber of Commerce and arguably the finest neo-classical building in the city. Set in the heart of Hamburg, adjacent to the town hall it is easy to reach via public transport. The evening will give attendees the chance to network amidst the finery of this prominent building.

25 Dipl-Ing Marko Maetzig (ARBURG GmbH + Co KG, Germany) Dipl Ing Marco Mulser (Fraunhofer IFAM, Germany) Session 13: MIM High Temperature Materials World PM2016 Congress and Exhibition Tuesday Morning, 11 October, Part 1 Dipl-Ing Klaus Aumund-Kopp (Fraunhofer IFAM, Germany) Dr James Sears (GE Global Research, USA) Session 14: Powder Recycling and Aging MIM For HT Turbine Parts: Gas-atomized Versus Mechanically Milled Nb-Si Alloy Powder Mulser, M; Hartwig, T (Fraunhofer IFAM Germany) Seemller, C; Heilmaier, M (Karlsruhe Institute of Technology - KIT Germany) Adkins, N; Wickins, M (The University of Birmingham United Kingdom) Metal Injection Moulding Of Iron-Base Oxide Dispersion Strengthened Alloys Meyer, A (Zentralinstitut fr Neue Materialien und Prozesstechnik Germany) Recknagel, C; Klöden, B; Weißgärber, T (Fraunhofer IFAM Dresden Germany) Mller, S; Langer, I (Schunk Sintermetalltechnik GmbH Germany) Horke, K (Zentralinstitut fr Neue Materialien und Prozesstechnik Germany) Kieback, B (Fraunhofer IFAM Dresden Germany) Singer, R F (Zentralinstitut fr Neue Materialien und Prozesstechnik Germany) Effect Of Microwave And Field Assisted Sintering On The Mecanical Properties Of Inconel 718 Mim Samples Jeanclaude, G; Thierry, B; Dugauguez, O (University of Franche-Comte France) Torralba, J M (University Carlos III of Madrid Spain) Influence Of Heat Treatment On Tensile, Fatigue And Creep Properties Of Nickel-Base Superalloy IN 713LC Fabricated By Metal Injection Moulding Horke, K (Rolls-Royce Deutschland Ltd & Co KG Germany) Scherr, R; Meyer, A (Joint Institute of Advanced Materials and Processes (ZMP), Friedrich-Alexander-Universität Erlangen- Nrnberg (FAU) Germany) Daenicke, E (Rolls-Royce Deutschland Ltd & Co KG Germany) Singer, R F (Joint Institute of Advanced Materials and Processes (ZMP), Friedrich-Alexander-Universität Erlangen-Nrnberg (FAU) Germany) Poster Supercritical Debinding Of Environmentally Friendly Superalloy A286 Feedstock To Metal Injection Moulding Process. Barrière, T; Gelin, JC; Royer, A (University of Franche-Comte France) Characterization Of The Virgin And Re-cycled Nickel Alloy HX Powder Used For Selective Laser Melting Shvab, R; Leicht, A; Hryha, E; Nyborg, L (Chalmers University of Technology Sweden) Effect Of Particle Size On Quality Characteristics Of Pure Titanium Using Metal Additive Manufacturing Mori, S; Hanami, K; Doi, K; Nishi, N; Maruyama, S; Kitagaki, H; Terauchi, S (Osaka Yakin Kogyo Co., Ltd. Japan) Keynote Paper Investigations Of Aging Behaviour From Aluminum Powders During A Atmosphere Simulation Of The LBM Process. Bauer, D (Airbus Group Innovations Germany) Session 15: Powder Characterisation II Dr Eduard Hryha (Chalmers University of Technology, Sweden) Prof Dr Jia Sung Lee (Hanyang University, Korea) Manufacturing Of Fine Spherical Iron Powder And The Influence Of The Pow-der Morphology On The Sintering Behaviour Walther, G; Bttner, T; Kieback, B; Weißgärber, T; (Fraunhofer IFAM Dresden Germany) Hoffmann, M (OSTEC GmbH Germany) Comparing Metal Powders Produced By Different Atomization Processes For MIM And AM Applications Using Automated Image Analysis Huck-Jones, D; Thorne, C; Virden, A; Duffy, J (Malvern Instruments United Kingdom) Energy Consumption In Iron Powder Production: Annealing Of Water Atomized Powder Kruzhanov, V (PM Consulting Germany) Arnhold, V (Powder Metallurgy Solutions Germany) Technical Programme 25

26 Recycling Of Mill Scale Into Iron Powder And Its Sintering Characteristics Dhokey, N; Tarate, P (College of Engineering Pune India) Session 17: HM - Modelling Poster New Functional Segregation Free Mixtures For High Density And High Precision P/M Components Suzuki, H; Nishida, S; Akagi, N (Kobe Steel, Ltd. Japan) Dr Karin Frisk (Swerea KIMAB AB, Sweden) Mr Anssi Laukkanen (VTT, Finland) Technical Programme Characteristics of Ti-6-AI-4V Powders by Gas Atomization Chen, G; Tan, P; Wang, J; Tang, H (Northwest Institute for Nonferrous Metal Resarch, China) He, W (Northwest Institute for Nonferrous Metal Resarch, China / Xi an Sailong Metal Materials Co. Ltd., China) Dr Thierry Barrière (University of Franche-Comte, France) Dr Carsten Peters (Hilti AG, Liechtenstein) Session 16: Compaction Simulation Simulation Of Die Filling For Powders With Complex Rheology Kraft, T; Breinlinger, T; Schubert, R; Hashibon, A (Fraunhofer IWM Germany) Cobalt Substitution In Cemented Carbides Guided By ICME Walbrhl, M; Ågren, J; Borgenstam, A; Linder, D (KTH Royal Institute of Technology Sweden) Thermodynamic And Diffusion Databases Of Multicomponent Cemented Carbides And Their Applications To Numerical Simulation Of Microstructure Evolution And Mechanical Properties During Sintering Du, Y; Peng, Y; Zhang, W; Cheng, K; Zhou, P; Zhang, C; Chen, C; Wang, Y; Pan, Y; Li, N; Chen, W; Zhang, L; Chen, L; Liu, S (State Key Laboratory of Powder Metallurgy China) Wang, S (Zhuzhou cemented carbide cutting tools limited company China) Mesoscale Simulation Of Fatigue Crack Propagation In Artificial WC-Co Microstructures Özden, U A; Jiang, K; Bezold, A; Broeckmann, C (IWM RWTH Aachen Germany) 26 Study Of Powder Filling Using Experimental And Numerical Methods Jonsén, P; Häggblad, H A; Gustafsson, G; Larsson, S (Luela University of Technology Sweden) Compaction Of A Copper Spiral Within A Cylindrical Die Of Steel Powder And Investigation Of Their Deformation Behavior Behrens, B A; Bouguecha, A; Vucetic, M; Bonhage, M (Leibniz Universitaet Hannover Germany) Zaitsev, A (Peter the Great Saint-Petersburg Polytechnic University Russian Federation) Malik, I (Leibniz Universitaet Hannover Germany) The Shrinkage Of Uniaxially Cold Compacted Iron Green Parts Molinari, A; Cristofolini, I; Torresani, E; Corsentino, N (University of Trento Italy) Larsson, M (Hoganas AB Sweden) Development Of Regression Model For Iron Powder Compaction Considering On Particle Size Distribution And Copper Content Effects Kim, S H (POSTECH Korea, Republic of) Koo, J M (POSCO Korea, Republic of) Park, S J (POSTECH Korea, Republic of) Simulation Of Abrasive Particle Collisions During Submerged Polishing Of CVD Coated Hardmetal Turning Inserts Smit, D; Sacks, N (School of Chemical & Metallurgical Engineering and DST-NRF Centre of Excellence in Strong Materials, University of the Witwatersrand South Africa) Poster Numerical Simulation Of Residual Stresses In Hardmetals Using An Elastic-Viscoplastic Material Description Kayser, W; Bezold, A; Broeckmann, C; Chen, G; Van Kempen, S (Institute for Materials Applications in Mechanical Engineering RWTH University Germany) Boin, M (Helmholtz-Zentrum Berlin fr Materialien und Energie GmbH) Thermodynamic Study On Multicomponent Cemented Carbides And Its Application To The Control Of Microstructure Peng, Y; Du, Y; Zhou, P; Zhang, W; Li, N; Chen, L; Zhang, L; Liu, S (State Key Laboratory of Powder Metallurgy, China) Wang, S; Wen, G; Xie, W (Zhuzhou cemented carbide cutting tools limited company, China)