Desigo CC V5.0 Release Notes

Transcription

1 Desigo CC V5.0 Release Notes This document describes detailed information on products and system components introduced as part of Desigo CC Family V5.0: Desigo CC Cerberus DMS Desigo CC Compact Desigo CC Connect A6V _en_a_50 Building Technologies

2 Availability Availability By Chanel Solution Partners Siemens SSP By Country Region Europe Region Americas Region Middle East, Asia and Pacific AT Austria CA Canada x AE Arab Emirates Region Germany DE Germany BA Bosnia US USA x AU Australia Other Regions BE Belgium BR Brazil x ASEAN BT INT BG Bulgaria CL Chile x CN China SEE (WR AT) CH Switzerland CO Colombia x HK Hong Kong WR FIN CZ Czech Rep. EC Ecuador x ID Indonesia OEM x DE Germany MX Mexico x IN India SI-LP DK Denmark PE Peru x KR Korea EE Estonia VE Venezuela x MY Malaysia ES Spain NZ New Zealand FI Finland QA Qatar FR France SA Saudi Arabia GB United Kingdom SG Singapore GR Greece TH Thailand HR Croatia TW Taiwan HU Hungary IE Ireland IT Italy LT Lithuania LU Luxemburg LV Latvia NL Netherlands NO Norway PL Poland PT Portugal RO Romania RS Serbia RU Russia SE Sweden 2 46 A6V

3 Availability SI Slovenia SK Slovakia TR Turkey UA Ukraine A6V

4 Cybersecurity disclaimer Cybersecurity disclaimer Siemens provides a portfolio of products, solutions, systems and services that includes security functions that support the secure operation of plants, systems, machines and networks. In the field of Building Technologies, this includes building automation and control, fire safety, security management as well as physical security systems. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement and continuously maintain a holistic, state-of-the-art security concept. Siemens portfolio only forms one element of such a concept. You are responsible for preventing unauthorized access to your plants, systems, machines and networks which should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. Additionally, Siemens guidance on appropriate security measures should be taken into account. For additional information, please contact your Siemens sales representative or visit Siemens portfolio undergoes continuous development to make it more secure. Siemens strongly recommends that updates are applied as soon as they are available and that the latest versions are used. Use of versions that are no longer supported, and failure to apply the latest updates may increase your exposure to cyber threats. Siemens strongly recommends to comply with security advisories on the latest security threats, patches and other related measures, published, among others, under A6V

5 Table of Contents 1 Content of this document Who can install and run V5.0? Our Journey Toward a Better User Experience: Flex Client New Enhancements for Platform New enhancements for Comfort New enhancements for Fire New enhancements for Physical Security New Enhancement for Power Management & Electrical Applications New supported subsystems, software, standards Technical Documentation Released software components and related version Delivered and owned by BP rd party necessary pre-requisites Open known issues and recommendations Fixes for known issues / requests Contact A6V

6

7 Content of this document Who can install and run V5.0? 1 1 Content of this document In this document we provide a detailed overview of V5.0 release, describing all the major and minor enhancements as well as the most important bug fixes This document complements the Sales and Delivery Release that focus on the major highlights. Remark: In the rest of the document, with the term Desigo CC we refer to the family and not only to the individual product, unless specified otherwise. 1.1 Who can install and run V5.0? With the introduction of V4.0, we switched from the Version Based Licensing model to the new Subscription Based Licensing. Instead of a version check, the product is now using the Subscription Expiration Date to check if a new software release can run or not. All the software components with a release date prior to the current Subscription Expiration Date can run. The release date for the Desigo V5.0 components will be set to February 28th, This means that one of two conditions must be met to run V5.0: You are a new customer ordering and activating the product after V5.0 market release. Therefore, you will receive a new Desigo CC license and the Subscription Expiration Date will be set to activation date + 12 months, for sure after February 28th, You are an existing customer, meaning with a Desigo CC installation already in place, with a Subscription Expiration Date of the site later than February 28th, For customers with an expired Software Subscription, it will be necessary to buy SUR/SUS units according to the Sales Policy. Note 1: Customers with a license version equal or older than V3.0, will have to activate the V5.0 license on the site. Note 2: If your current system is at V1.X (Americas Region only), then contact Customer Service in Buffalo Grove for special handling. A6V

8 2 Our Journey Toward a Better User Experience: Flex Client 2 Our Journey Toward a Better User Experience: Flex Client Client infrastructure Flex Client profiles for stations and users Possibility to configure client profiles for Flex Client and assign them to stations and users. With V5.0 we will provide a first set of basic client profiles for different applications. Application rights The configured application rights for user groups are now also supported and applied in Flex Client. Event Handling Save and re-apply workspace user setting Workspace user settings (e.g. active layout, splitter positions, event list settings) are automatically saved and will be re-applied at next logon. The workspace settings are saved per user and for different screen sizes. Event notes Operators can now add and view notes in the Event List, related to the selected event. These notes are saved and retrieved to/from the HDB. Investigative treatment: The operator can start investigating the causes related to a new event popping up in the event list. A new instance of the System Manager opens keeping the event in focus always visible and logging actions into the HDB with reference to the event. Notification Center Access to events via dedicated URL Direct access to selected events with dedicated URL (i.e. that can be saved in the browser favorites or shared with other operators) Configurations of notifications per event category The configuration of notifications for new events can now be done per event category (i.e. so that different settings can be made for the different categories) Enable/disable sound for unprocessed events The notification configuration page now also provides the option to en- /disable the event sounds for unprocessed events (if required, also per event category) Graphics Separate notifications and grouping for new events Each notification for a new event is now shown as a separate entry in the Notification Center but grouped under the section New Events. The group can be collapsed or expanded to show less or more detailed information. New notification type Suppressed Objects A new notification type for Suppressed Objects has been introduced. It shows the number of Objects with Event Suppression enabled. Tiles overview page Tiles overview for graphics: when the user selects the graphic application node or any sub-folder, the tiles view displays a tile for each graphic object below that node (including sub-folders) Toolbar commands 8 46 A6V

9 Our Journey Toward a Better User Experience: Flex Client 2 The Graphic Viewer now offers command buttons for Scale to Fit, Zoom In /Out. In-Graphics commands The following In-Graphics commands are now also supported in Flex Client: slider, rotator, strings. Layers and depths The operator is now able to select depths or filter configured layers during runtime Event indication New visual indication for objects that are in alarm state on Flex Client graphics. The following states are visualized: Active alarm Alarm not active and unacknowledged Alarm active and acknowledged Alarm not active, acknowledged and unreset Open URLs via graphics It is now possible to open URLs in a new browser tab by clicking on a graphic symbol. Trends General settings It is now possible to define general settings that apply to all trendlog objects or newly created trendview definitions. This includes the resolution of the series as well as the default time range. Create, modify, and delete trendview definitions It is now possible to create, modify and delete trendview definitions via Flex Client. In Edit Mode, various settings for a trendview definition can be made, chart properties can be changed, datapoints can be added or removed and the properties of the different series can be adjusted. Documents Embedded web pages By default, URLs in Flex Client open in a new browser tab. This is the standard behavior introduced with V4.2 and recommended. With V5.0, we now offer the additional option of displaying web pages embedded inside the Flex Client application, if so desired by the customer. Engineers can now whitelist URLs in SMC with the result that those URLs will be displayed inside the Flex Client application instead of a new tab. Please be aware that only https// URLs can be whitelisted, and that many websites do not allow embedded display inside another HTML5 application. A6V

10 3 New Enhancements for Platform 3 New Enhancements for Platform Replacement of old Internet Explorer Web Client (based on Microsoft XBAP technology) - Not available with Desigo CC Connect As announced with the Maintenance Information (MI) 148 ( DCC XBAP WEB Client), the former Web Client for Internet Explorer, based on XBAP Microsoft technology, is no longer supported and therefore no longer configured when installing V5.0. Flex Client is the new state-of-the-art default web client that can run on any HTML5 compatible browser and all operating systems supporting those web browsers, with a modern and optimized user interface. For those rare cases when customers still need some of the features of the old Web Client that are not yet available with Flex Client, the Click-Once client can be used in most cases, or there is a manual procedure to configure the Web Client. All information and important recommendations are provided with the MI. Cybersecurity matters: authentication, authorization and security settings IEC SL2 compliant deployments In 2018, Siemens founded the Charter of Trust, a global Cybersecurity organization with tasks covering the protection of IT, OT and all of Siemens products, addressing security issues both for Siemens internally as well as for its customers. Desigo CC is complying with the cybersecurity strategy of Siemens, targeting a minimum cybersecurity capability of IEC Security Level 2 (SL2). With V5.0, Desigo CC provides the capabilities to be deployed in accordance with IEC Security Level 2. Deployment types range from single machine to client-server deployments, with both remote access and distributed servers. Extensions and subsystem integrations have been extensively evaluated and tested to be listed as SL2 compliant, allowing the power of Desigo CC to also be used in deployments with higher security demands. A hardening recommendation for MS Windows operating systems according the Center for Internet Security (CIS) has been added to our documentation and tools. For more detailed information please refer to the cybersecurity guideline and related documentation. Access privileges for event categories On the Security Rights configuration page, it is possible to define which event categories are accessible for each user group. For those event categories that are excluded, the system will exclude the correspondent Summary Bar Event indicator and all related events from any applications (e.g. reports, mobile app, NORIS, ) Example: a technician is allowed to see only technical faults for which she/he is responsible, but not allowed to see Fire alarms to avoid liability issues. Single-Sign-On (SSO) via external OIDC providers Available via Flex Client only Authentication of configured user accounts can also be performed via external OpenID Connect (OIDC) providers, including Siemens ID. In this way, the handling of the account s passwords (e.g. strengths, frequency of updates) is managed by the OIDC provider and the operators can log on via V5.0 Flex Client using the same credentials for all applications/systems controlled by the same OIDC provider. Example: on the Siemens network, the operator can log on to Flex Client and automatically access other applications supporting Siemens ID without providing again the credentials (and vice versa). Multifactor authentication Available via Flex Client only Passwords are not always enough. To comply with increasing security demands, Desigo CC now adds an extra layer of security if required. Using the capabilities of OIDC, the operator is now able to use multifactor A6V

11 New Enhancements for Platform 3 authentication (MFA) to log on, combining two or more independent credentials. Prerequisite for MFA in Desigo CC is that the chosen OIDC provider supports MFA with his infrastructure and that MFA is enabled. Log-off option for clients Not available with Desigo CC Connect From the Summary Bar menu, operators can log off from the active client session, resulting in immediate display of the logon so that the next operator can enter the new credentials. In the past, for Installed and Windows App clients, it was only possible to exit. The next operator then needed to manually restart the application or switch over to another operator who had to be present during the operation. System Use Notification It is now possible for a customer to exchange the System Use Notification (Acceptable Use Policy) with his own policy. The policy is replaced system wide and allows the customer to react to changes in cybersecurity laws and regulations. Engineering and system configuration tools Example: Due to use in a semi-public environment, the owner of the system has to display dedicated Terms of Use at every login for external operators. Engineering Console In previous versions, engineering tasks were distributed in the System Manager application across different views and nodes, which forced project engineers to jump from one node to the other to complete the configuration of the project. In V5.0, we have introduced a new concept that will be further developed in the next versions. As soon as the project engineer switches the System Manager to Engineering Mode, the application displays a new landing page with big icons to identify the main configuration areas (e.g. Users, Networks, Graphics, ). From this page, the operator can browse all engineering tasks without losing control. Some of the tasks are already linked to wizards, like the new Network Wizard introduced with V4.2 that guides the user through all engineering steps. Context Sensitive Help Context Sensitive Help has been re-introduced for engineering activities, allowing users to call up and display the product help documentation for the application currently being displayed. Copy of System Browser Object Name, Descriptions and Alias System Browser Object Name, Descriptions and Alias can be copied onto the clipboard and pasted somewhere else later on. Object Memo and Informational Text Not available with Desigo CC Connect Users need to enter notes on nodes to be read by any operator at any time. Notes are texts entered in real-time by an operator, while doing the following tasks, for example: While responding to an alarm or commanding a point to let other operators know what is being done (e.g. a new filter is on order and due next week. Ignore this filter alarm until then ) Giving alarm specific instructions (e.g. call the police station at number 5678 ) Specifying who to call for service (e.g. call Mr. X at number 1234 for service ) Informing other operators about the point status before doing preventive maintenance Providing general information about a point With V5.0, the operator can select an object from the System Manager tree A6V

12 3 New Enhancements for Platform and, from the Contextual Pane, can enter and see two types of notes: Object Memo (dynamic notes), which can be edited multiple times overwriting the previous one (only the latest entered note is visible on a point and on events) Informational Text (permanent notes), which are retained indefinitely and never overwritten by dynamic notes Automatic switch of Transaction Mode value during nodes import Before importing a subsystem configuration file, it was necessary to manually change the system Transaction Mode to Simple otherwise the import could take a very long time to be completed. On completion, the engineer had to manually switch it back to Logging. Manual operations like this can sometimes be forgotten, leading to undesirable results. With V5.0, the value of the Transaction Mode is automatically changed before and after the import procedure without any manual intervention. Removal of Extension Modules from a project Using the SMC it is now possible to remove the Extension Modules (EMs) that are not being used and therefore not needed anymore. Override protection for sub-system texts after re-import After a configuration import of a subsystem, sometimes the project engineer needs to customize some of the imported texts to better represent the status and run-time values of the subsystem in the available applications (e.g. graphics, reports, ). Typical candidates for customization are Substitution Values and Reference Values. Up to now, when the same subsystems were imported again, all texts were restored using the value from the subsystem, overriding all customizations made by the project engineer. With V 5.0, it is possible to lock the texts, so preventing them from being overridden during the next online or offline import. Days left before expiration of Software Upgrade subscription A specific property in the Management View on the node Licenses provides information about the number of days that remain before the subscription for the Software Upgrade program expires. A low-level event is also generated in the Event List, and accessible with all other applications and interfaces, when this number is equal to or lower than 90 days. At the project configuration level, project engineers can use this event to trigger other actions, for example, to send a notification message (e.g. ) to the customer and/or service provider. Event handling Alarm suppression As an extension of the functionality released with V4.0, where it was possible to suppress all alarms of a given object, with V5.0 the operator can now selectively suppress some of the alarm types only. Example: from a video camera object, the operator can suppress motiondetection alarms, but all other alarms are still generated. Automatic print-out of documents (PDF and HTML) Not available with Desigo CC Connect With previous versions, there was no way to automatically print out a PDF or HTML document when a new event occurred. The documents could be displayed during the assisted event treatment by means of the Document viewer step, but the user had to manually trigger any print-out. With V5.0 it is now possible to configure an operating procedure for automatically printing documents (PDF or HTML). This is useful for printing instructions on handling newly occurred events, particularly in the event of an emergency when time is critical (e.g. for printing emergency instructions or maps for fire brigades) A6V

13 New Enhancements for Platform 3 BACnet notification improvements In Desigo CC V5.0 we are introducing a new mechanism for effectively managing the events for BACnet subsystems. These are reported to the Log Viewer according to notification type. Notification - not available with Desigo CC Connect For example, when the notification type = Alarm, then the summary bar will display the alarm event and a new record is added to the Log Viewer. But if the notification type = Event, then the new record is only added to the Log Viewer and it is not visible in the summary bar. Replacement of old RENO with new notification During the upgrade of old V3.x or V4.x projects to V5.0, the configuration of previous remote notification settings is migrated to the new notification module introduced with V4.2. Any new project created in V5.0 will use the new notification module only without any references to old RENO. Enhanced message tailoring (Java Scripts) In many circumstances, the message texts to be sent to notification recipients are too long and include unnecessary information. V5.0 allows using Java Scripts to customize the message texts and optimize them for the target recipients and channels. For example, it is possible to define which view the path/designation will be taken from, and which parts of the path will be displayed. Support of special characters in non-latin languages for SMS (e.g. Chinese) Notification uses messages coded in Unicode UCS2 to allow the transmission of 2 bytes characters via SMS modem. Add attachments to s It is possible to add attachments to s: Add 1 or multiple static files as an attachment to s Add a project graphic file (*.png ) that is dynamically linked to the data point which generated the event Validation profile for escalation command icon in the event list Whenever a new event triggers some notification messages, it is possible to start/stop the notification procedure from the Event List using dedicated buttons. If the object that generated the event had a validation profile assigned to it, these buttons in the Event List now open the Validation dialog to enter comments and, optionally, confirmation credentials. Support of a new modem with IP access for SMS texts Notification supports the 3G/4G modem/ router SmartStart SL304 which is usable in the regions EU and DE. The router can be connected to Desigo CC via IP. Mass Notification (for RSS only) - not available with Desigo CC Connect A6V

14 9: Deg F 34.3 Deg F 9: Deg F 34.4 Deg F 9: Deg F 34.5 Deg F 9: Deg F 34.6 Deg F 10: Deg F 34.7 Deg F 10: Deg F 33.4 Deg F 10:30 34 Deg F 33.5 Deg F 3 New Enhancements for Platform Support for an IP multi-button box (mbb) Historical DataBase (HDB) Hospitals in the region AM have requested a fast and easy way for nurses, doctors and other staff members to get help in critical situations. The current solution of connecting multiple and quite large single emergency buttons side by side is too expensive and clumsy. In a first step, the 1-, 2-, 4- or 8-button box with LED feedback will only be introduced in the region AM. Configurable intervals for logging value changes Minimum interval for logging values: sometimes there are objects in the system that change value extremely frequently (e.g. many times per second) and constantly. Logging all changes into the HDB can very quickly result in overloading of the database. For those cases, V5.0 introduces the possibility of customizing the minimum interval for logging the values of selected objects (e.g. for object X, do not log more than 1 value per second/minute ). After the first value is logged, all subsequent values in the same interval will be discarded. Maximum interval for logging values; at the other extreme of the above case there are objects that change value very rarely (e.g. once per month). Searching for changed values for those objects can be difficult for engineers because they need to look in many different date and time ranges. V5.0 also allows specification of the maximum interval for logging values for selected objects (e.g. for object Z, log at least 1 value every second/minute ). In the intervals where no new values are available, the last one will be logged again. Document Viewer - not available with Desigo CC Connect Allow operators to configure new document The Document Viewer application now provides an Edit Mode so that operators can add new documents to be displayed at run-time. Previously, the action of configuring documents was available only in Engineering Mode. Operator Tasks - not available with Desigo CC Connect Delayed start Operators can specify that a given task will start: (default) immediately when the task is launched at a specific date and time or in a specific amount of time (same options as End Task) Standard Reports - not available with Desigo CC Connect Time Trend Object 1 Trend Object 2 Trend Interval reports Ability to create Trend Interval reports for any trend object (e.g. Desigo PX, Apogee P2 and BACnet, etc.). Trend Interval reports, in a tabular format, provide values at a given interval for all configured trend objects, regardless of when the subsystem provided the sample. The interval is configurable by the end user. Advanced Reporting - not available with Desigo CC Connect Easier installation of Advanced Reporting EM and pre-requisites Open JDK, which is mandatory in order to run Advanced Reporting, is now installed automatically together with the EM. Manual steps are no longer necessary. Advanced Reporting EM now supports an upgrade workflow (from previous version). Advanced Report for Aggregated Trends table Possibility of creating reports with Aggregated Trend, with a configurable sample interval for displaying all values normalized for given variables throughout the day and normalized to the provided time interval A6V

15 New Enhancements for Platform 3 Mathematical operations in trends data series Simple calculations like +, -, /, *, (), sqrt(), ^ can be executed between trends and constant numbers, and the results can be plotted in a report. Advanced reports stored on the server Graphics - not available with Desigo CC Connect The advanced reports generated from a client machine can be stored on the server so that they can be displayed on other client machines. Copy-paste of multiple symbols Trends - not available with Desigo CC Connect Graphics symbols are now pasted into the same layer that they were copied from. For example, if there are multiple instances of mechanical systems on a graphic (e.g. chiller-pipes-pump combinations) that are represented in multiple layers (chillers on 1, pipes on 2, pumps on 3), when the engineer copy-pasted this group of symbols, they are all pasted into the same layers they were copied from. Automatic cycling of graphics without user interaction Ability to set up the interface to cycle through multiple graphics automatically based on selected timing. This mechanism is especially interesting for those cases where the client application is displayed on monitors where there is no mouse and keyboard (e.g. hotel lobby). The Trend Bulk Editor now provides additional options which allow definition of a naming convention for trendlog objects. The user can define a general name and then choose between: or Append <Trended object> (appends the objectname of the trended object) Append <LogType> (appends the Logtype or the interval where the interval is applicable) Append <UniqueID> (appends a unique ID starting from a number which can be defined by the user) In addition, it is also possible to specify a maximum name length to cater for possible subsystem limitations. BIM Viewer - not available with Desigo CC Connect The Desigo CC s BIM Viewer is providing additional features to support the digital journey of a building s lifecycle from planning and design phase, to operation. The following features now are supported: Display visual and data information from Building Automation equipment such as room controllers, field devices etc.in a 3D view Display the 3D model of the building (rotate, zoom in/out, manual navigation through the 3D model, navigation through doors and windows) Navigation from system object via the browser to the associated equipment in the BIM View and vice-versa Selection of a BIM equipment and provide current (runtime) values and status properties. Commanding support via the operating pane Improved information in the tooltips Display 2D floor plan(s) of the building (show room in focus, various room statuses as colored carpets, show runtime room values, selection of a segment) Display* room status in the windows of the 3D building view (room operating mode, presence detectors, window state, temperature status, light state, blind positioning) Provide a summary of all active events that are present on a selected A6V

16 3 New Enhancements for Platform Southbound connectivity Northbound connectivity area (e.g. floor) Show the location of the building in Google maps (where applicable) Display the datasheet/datasheets and/or documentation of the selected equipment or field device, if relevant properties are present in the BIM data. *Optimized for Desigo Room Automation BACnet notification-class bulk deletion BACnet editor snap-in supports the deletion of one or more recipients found in Notification Class Objects from all recipient lists of all NC on all BACnet devices under the same network. Thanks to this enhancement, commissioning engineers can easily identify and delete unwanted recipients from multiple Notification Class Objects in the connected network in bulk mode. OPC UA Client V5.0 provides the capability of integrating 3rd party devices by connecting to external OPC UA Server systems. Object models created are normally composed of many properties mapped to one OPC tag. Structured OPC UA Standard types such as Boolean for binary In/Out, Float for Analog In/Out, Enumeration and Structure are supported. SNMP Client license counting with SCADA points Current SNMP Southbound solution uses SCADA point licenses for many mandatory status/diagnostic object s properties, making the overall integration expensive. In 5.0, the following properties/tags are excluded from the license counting: CommonStatus.Reachable CommonStatus.MissingConfiguration CommonSettings.ClassName CommonSettings.HostName CommonSettings.NotesName CommonSettings.VendorAndType CommonSettings.Version Integration Tokens for license counting For the following protocols it is no longer necessary to buy Integration Tokens: KNX M-Bus Enlighted Haystack BACnet Server The BACnet Server introduced with V4.2 is now enhanced with: Improved alarm configuration for both point types (templated/nontemplated) Support for exposing management station trends as BACnet trend log objects Increased limits with support for objects per running server Remark: This limit also depends on how many properties of a single object are exposed and how frequently the values are polled. SNMP Agent (read-only) New NORIS interface to retrieve runtime values and events (SNMP traps) using SNMP protocol. The solution allows the Building Automation and Control System devices to be monitored (e.g. datapoints, alarms, values) by a Network Management System (NMS). The following main features are supported: Support of SNMP V2 and V3 protocol SNMP traps SNMP get A6V

17 New Enhancements for Platform 3 Dedicated display level to select the properties to expose via northbound interface A new display level (DL4) is introduced in "Model & Functions" snap-in. The new display level can be used as a filter to expose properties via northbound interfaces. When DL4 is flagged, the property can be exposed via NORIS. DL4 is typically used to expose properties to the OPC Server interface. Up to now, the DL2 flag has been used to expose properties to the OPC Server interface, resulting in a lot of undesired information being exposed in order not to affect the information displayed in the operation panes of Desigo CC Clients. Using a dedicated display level (DL4), it is now possible to refine and optimize the information exposed, thus also resulting in more points and effective properties that can be exposed to the OPC Server interface. Scope rights take priority over the DL4 settings. This means that if the point instance is excluded from the scope of the logged-on user, then the point and all properties are excluded from NORIS, no matter what the DL4 flag setting is. Miscellaneous Time zone handling In case the server is in a different time zone of the logged on operator, the Windows App Client, Installed Client and Flex Client will show the date and time adjusted with the time zone of the client and not anymore of the server for these applications: Event applications (e.g. Event List, ) Trend Viewer Reports Operator Tasks This is particularly useful when the server is hosted in a virtual environment in a Data Center potentially far away from the monitored building. Desigo CC Compact Licensing Logics (reactions and scripts) is now included in all the Compact products without additional costs. This change extends the application range of the Compact products. A6V

18 4 New enhancements for Comfort 4 New enhancements for Comfort The features listed in this chapter refer to typical Comfort jobs and are available for products that can use BA points, such as Desigo CC, Desigo CC Compact for BA, Desigo CC for Electrical Applications and Desigo CC Connect (only when specifically mentioned). InfoCenter Data Access With the coming retirement of InfoCenter, Desigo CC V5.0 users will be able to access their InfoCenter database through Desigo CC Advanced Reporting. InfoCenter Data Access (ICDA) will support viewing historical InfoCenter trend data and producing reports using this data in Desigo CC Advanced Reporting. InfoCenter report templates can be converted to Desigo CC Advanced Reporting templates in order to be used with InfoCenter Data Access and Desigo CC Advanced Reporting. A template conversion tool is provided that allows an automated conversion of templates with the most common InfoCenter report controls. In addition, the following standard InfoCenter report templates are available: AHU Report Comfort Report Controlled Room Temperature Report Emission Summary Report Chiller Report Control Performance Report Critical Storage Report Room Pressure Report PPCL Editor for APOGEE: Support Single Line Download Added support to existing APOGEE PPCL Editors for download of individual lines, or groups of lines, instead of the entire PPCL program. Bulk Trend Editor for APOGEE P2 and APOGEE BACnet Allows creation and editing of P2 and BACnet multiple trends in bulk without the need for Datamate Advanced or CT. Smart Thermostat Integration via APOGEE BACnet controllers Smart Thermostat devices can be integrated via Apogee BACnet controllers as FLN devices. Field Network Wizard for Apogee BACnet, APOGEE P2 The Field Network Wizard was introduced in V4.2 to simplify the workflow of connecting subsystems, with a dedicated step-by-step user interface. In V5.0, the Field Network Wizard is linked to the new Engineering Console (see 0 [ 8] - New Enhancements [ 8]) and also supports configuration of APOGEE BACnet and APOGEE P2 networks A6V

19 New enhancements for Comfort 4 Schedule Apogee P2 event and BACnet schedule overrides via EMS scheduling software External EMS software and Desigo CC Family products can synchronize Apogee P2 evens overrides and BACnet schedule exceptions. Changes made by one software (e.g. EMS) will be visible from the other (e.g. Desigo CC) and vice versa. Support lighting and shading in Flexible Room Management For Desigo PX Systems, the room editor for Desigo Room Automation is further enhanced to support reassignment of light/blind pushbuttons, brightness/occupancy sensors or collision detectors to a different room/segment. Filtering options are now available to simplify the search and make the changes in a more efficient manner. Changes and unassigned elements are highlighted. Icons on the rooms and room segments allow the user to perform the changes efficiently. Configuration can be exported and imported allowing users to quickly change the room layouts without having to re-do changes in the editor. A standard report providing information about room configuration is provided. As an option another report, showing only the configuration changes done in the last 24 hours, can be imported. Graphic templates for KNX and Modbus (i.e. RDx) devices Graphic templates for Modbus and KNX communicating thermostats and KNX are now available to graphically represent corresponding applications and related values. PXC 4/5 configuration status V5.0 can verify whether the configuration of the integrated PXC 4/5 is up-todate. If not, an event information is generated to inform the project engineer that a synchronization is necessary. Desigo Room Automation: show graphic template for selected point On Desigo PX systems, when datapoints associated to graphic templates only (and not to real graphics), the graphic template is now displayed. Previously, no graphic was displayed in the primary pane when points were selected from the tree or from the event list. Reports for DRA (Desigo Room Automation) objects New reports are provided listing, for example, all the points that are manually overridden or commanded in the Desigo Room Automation system. A6V

20 4 New enhancements for Comfort New properties in extended operation tab for Desigo PX The following BACnet properties are now visible in extended operation tab when importing Desigo PX devices using the LEAN library (default one) Property Description AI ComgSta Commissioning State x x x x x x TiMonOn Monitoring time switch-on x x TiMonOff Monitoring time switch-off x x Slpe Slope x Icpt Intercept x DlyOn Switch-on delay x x DlyOff Switch-off delay x x TiOffMin Min switch-off time x x TiOnMin Min switch-on time x x TiPln Polling Time x x x x x x HrtBt Heartbeat x x x Detailed common event info for Desigo Room Automation A new snap-in allows viewing of the event details of the room application through the Common Event object. Also valid for Common Event objects used in PXC4/5 devices. A O BI B O MI MO Siclimat-X Improvements In Siclimat-X system there are some properties (e.g. time values) that generate information in encoded BCD format. Desigo CC provides now the necessary conversion format to read and write those values as well. Data Access (Audit Trail Data) from Desigo Insight to Desigo CC Former Desigo Insight users can use Desigo CC to read, report and filter the audit trail entries from Desigo Insight database. The source of the Audit Trail database is an XML file provided by the Desigo Insight Migration tool. Interfacing with Building Operator cloud application It requires Building Operator release of April 2021 When Desigo CC is connected to Building Operator (link), the site can be monitored remotely and the local Desigo CC Flex Client can be accessed through a secure internet connection. Building Operator (link) is a new BP cloud-based product launched in 2019 to allow Comfort service providers to remotely monitor, operate and troubleshoot small to medium-size buildings. Available as a SaaS solution, Building Operator provides real-time building status and operational updates. This makes corrective maintenance decisions possible even on the go. When Building Operator connects to sites where also Desigo CC is installed, the two products combined deliver added value. In fact, service technicians can monitor the site remotely using Building Operator and in case of technical issues that require more detailed information and sophisticated tools for troubleshooting, technicians can start with 1-click a secure IT-Tunnel connection to Desigo CC to use all features provided by the V5.0 Flex Client. No special configuration is necessary on Desigo CC machine A6V

21 New enhancements for Fire 5 5 New enhancements for Fire The features listed in this chapter refer to typical DMS jobs and are available for products that can use Fire points, such as Desigo CC, Cerberus DMS, Desigo CC Compact for DMS and Desigo CC Connect (only when specifically mentioned below). Field Network Wizard for Modular, XLS, and MXL Fire Panels The Field network Wizard was introduced in V4.2 to simplify the workflow of connecting subsystems with a dedicated step-by-step user interface. In V5.0, the Field Network Wizard is linked to the new Engineering Console (see 0 [ 8] - New Enhancements [ 8]) and supports the configuration of Desigo Fire Safety Modular, Cerberus Pro Modular, XLS, and MXL fire panels. Automatic placement of symbols Following enhancements are introduced in V5.0: Customization of depths and layers Optimized parent symbol placement for L- and U-shaped zones Improvements in the symbol s harmonization and in the handling of duplicate symbols in different layers Zero padding option for XNET-based devices Low Cost Fire Management Station Computer with Control NFPA and UL 864 code changes make it possible to have full control of a fire system from Desigo CC while running the software on an off-the-shelf computer (Dell, HP, Lenovo, etc.). A UL 864 approved computer is no longer required when there is a fire panel in the same room with global visibility & control of the entire fire system. WAN topologies for Stand-alone Modular and XLS Fire Panels The fire Wide Area Network (WAN) topology for Desigo CC enables you to connect Desigo CC to stand-alone Modular or FireFinder XLS 12 fire panels with dedicated point-to-point connections. RS-485 and Modem connections are support between a HUB-4 card located in a WAN Enclosure near the Desigo CC and a HUB-4 card located in each connected fire panel. Listed to UL th edition and ULC-S527 3rd edition in the following configurations: FireFinder XLS 12 - full control for either fire or fire & voice panels Modular - full control for fire panels Modular - monitoring only for fire & voice panels Simple Purge / Mop-up graphic symbols Fire graphic library is enhanced to provide a basic set of symbols for Smoke Purge/Mop-up applications: RTAC & AC Smoke Dampers & Damper Fans Door (Open/Close) Supply Air, Return Air, Transfer Air, and LED Legend A6V

22 5 New enhancements for Fire NCC Migration System Information Report To further reduce the effort to migrate a NCC project to Desigo CC or Cerberus DMS, a System Information Report can be created to provide information about what can be migrated, such as the number of fire points on each panel on an XNET or WAN connection. Integration of Honeywell Notifier AM (also available with Desigo CC Connect) Honeywell Notifier AMxxxx is a specific product line of Fire panels very much used in the Italian market. The protocol used to communicate to this panel is CEI-ABI. Desigo CC V5.0 provides direct connectivity. Integration of SCAME OPC Server (also available with Desigo CC Connect) SCAME is a 3rd party fire system used in some European countries. V5.0 provides integration of SCAME systems via OPC protocol. Integration of Edwards EST3 * (also available with Desigo CC Connect) Integration of Edwards EST3 fire system via BACnet using the Field Server (from Sierra Monitor) gateway which converts EST3 External Communication Protocol (ECP) to BACnet. EST3 BACnet points can be discovered automatically using BACnet auto-discovery function or imported manually through EDE file import. * Extension is available for field test and distributed on demand by Application and Integration Center. Ask to [email protected] for more details A6V

23 New enhancements for Physical Security 6 6 New enhancements for Physical Security The features listed in this chapter refer to typical DMS jobs and are available for products that can use Security, Video and Access Control points, such as Desigo CC, Cerberus DMS, Desigo CC Compact for DMS and Desigo CC Connect (only when specifically mentioned below). Integration of CS6 Guarto (also available with Desigo CC Connect) CS6 Guarto intrusion panels were often used with legacy DMS management stations such as MM8000 and LMS WAN/MM2000. V5.0 introduces support for CS6 Guarto in 2 ways: Via NK82xx gateway using CMSDL/IP protocol Via NK822x gateway using CEI-ABI protocol Multiple CS6 panels can be connected to Desigo CC products, either as stand-alone panels or as networked panels on the same LON-Bus (in the latter case, the limit is 4 panels). SPC treatment commands (Ack and Reset) on zone objects Operators can send treatment commands (ack and reset) from intrusion zone nodes and graphics while investigating events, for example, and without the need to navigate to the panel node to find the commands. Treatment commands ACK and Reset have therefore been made available at the zone nodes, as was already possible for the fire systems. VMS trigger events In addition to the possibility of triggering events in the VMS from the management system, it is now also possible to trigger events in the management system from the VMS. VMS triggers can be used to monitor specific functions of the video system and, when the trigger is activated, the supervision system (the management station) is expected to post an event and, if the proper logic is configured, react with some other actions to the event itself. V5.0 can use VMS triggers to start macros, scripts or reactions. Example: an open barrier is detected by the VMS, which notifies Desigo CC via a trigger event. Based on this event, Desigo CC can command a camera to start the recording or command the Access Control system to lock the gates/doors. A6V

24 7 New Enhancement for Power Management & Electrical Applications 7 New Enhancement for Power Management & Electrical Applications The features listed in this chapter refer to Power Management and Electrical jobs and are available for products that can hold Metering and Electrical data points, such as Desigo CC, Desigo CC Compact for BA, Desigo CC Connect (only when specifically mentioned), Desigo CC Compact for Electrical applications and Sentron PowerManagement. Remark: Power Management applications strongly benefit from all enhancements for Advanced Reporting as described in chapter - New Enhancements for Platform [ 8]. Integration of additional KNX devices (DALI GW Tuneable white) (also available with Desigo CC Connect) KNX integration supports the new Tuneable White functionality of DALI GW devices with ready-to-use graphic symbols that allow tuning of the white temperature color of the lights connected to DALI GW device. Automatic installation and project configuration Automatic and semi-automatic procedure are now available for an easy installation and configuration saving effort and time in the commissioning phase. These procedures allow for: 1. Silently installing the software and the KNX adapter 2. Activating the required licenses 3. Creating the project with the KNX adapter and importing the JSON configuration file to the adapter discovering the devices connected to the KNX router Graphic and Report Templates To better visualize and operate with KNX devices, dedicated and improved graphic templates are provided for QMX thermostats and Presence Detectors. In the same way, new report templates for DALI GW emergency light test are available out-of-the-box A6V

25 New Enhancement for Power Management & Electrical Applications 7 OCPP Integration for e-car Charging Station monitoring* (also available with Desigo CC Connect) V5.0 can connect directly to the Charging Stations using the OCPP Protocol. The "OCPP Adapter" provides all available information that can be read from the charger station and features dedicated graphic symbols: State of the charging station Charging Unit EVSEs status Total Energy used by each EVSE (KWh when CAR is charging) Elapsed Time (charging time) Charging Power Recharge Status Recharge Type Absorbed Power (Kw) EVSE Power setpoint EVSE Current setpoint Charging Units Plugs status Plug Locked Status Charging Remote start * Extension is available for field test and distributed on demand by Application and Integration Center. Ask to [email protected] for more details Powermanager New report: Sankey New native devices: P855 Faster installation (Java and advanced reporting are installed automatically with the extension module) Logical devices can use any Desigo CC property. For example, create a KPI with temperature. A6V

26 8 New supported subsystems, software, standards 8 New supported subsystems, software, standards With V5.0 we release a new document to collect all information about the compatibility with external systems and software: Compatibility Matrix (restricted) In the table below we list the most important updates: Comfort Climatix version VSS11.50 and new AHU Application with v4.00 or the newest v4.1 Fire Algorex / Synova CC11 EP5 via Cerloop UL/ULC Approvals (proposed, final conformation at the time of the market release): Physical Security Operating System UL/ULC approval for RSS SPM tool integration UL th edition (Control Units and Accessories for Fire Alarm Systems) ULC-S (3rd edition) (Control Units for Fire Alarm Systems) ULC-S (Equipment for Fire Signal Receiving Centres and Systems) UL2572 (Mass Notification Systems) ULC-S576 (Mass Notification System Equipment and Accessories) UL294 (Access Control System Units - 7th edition) UL1076 (Proprietary Burglar Alarm Units and Systems) ULC/ORD (Proprietary Burglar Alarm Units and Systems) CS6 Guarto SiPass v2.8 SPC 3.9, 3.10, 3.11 Windows 7 is no longer supported with V5.0. Databases Note: Windows 7 is still supported for versions <= V5.0 according to the product life cycle. However, it cannot be always guaranteed the functioning of our product due to the limited support from Microsoft. In those cases, it will be necessary to upgrade the operating system to continue working with our product. SQL Server 2019 (Express, Standard and Enterprise) Note: SQL Server 2012 (Express, Standard and Enterprise) will be no longer supported with V5.0. SQL Server 2019 Express is replacing SQL Server Express 2014 in the installation media A6V

27 New supported subsystems, software, standards 8 License Management LMU 2.4 and new dongle LMU 2.4 is backward compatible with previous versions of Desigo CC Family products New dongles can be used for new projects and as a replacement of broken/lost dongles already used with existing projects. Miscellaneous Windows Defender virus scan and firewall have been tested with V5.0 Renewed OPC Server certification by OPC Foundation Renewed BTL testing A6V

28 9 Technical Documentation 9 Technical Documentation The following documents have been created and updated to facilitate the technical assessment and commissioning of Desigo CC family products: Document (classification) System Limits (restricted) - NEW Describes system limits of the product based on supported configurations and topologies. Extension Module Catalogue (restricted) - NEW Lists all HQ extension modules with a short description of their purpose. Compatibility Matrix (restricted) - NEW Describes the compatibility of V5.0 software with all connectable subsystems and other SW environments and tools (e.g. Windows OS, LMS, ) Activity Logging (restricted) Provides a high-level overview of the activity and event logging functionality and clarifies various approaches to this topic. BACnet Server PICS The BACnet Server Implementation Conformance Statement is a document created for the BACnet Server that identifies the particular options specified by BACnet that are implemented. All devices conforming to the BACnet protocol have a PICS, and this document is available for use by any interested party. System Dimensioning Tool (restricted) It allows project engineers to calculate whether a given customer project can be satisfied by V5.0, comparing the project specifications with the system limits of the products. It also recommends the HW specification where to run the products. Desigo Configuration Module (DCM) (restricted) Desigo CC V5.0 is intended to be supported by an updated version of DCM, currently planned for March CY2021. Further updates will be provided closer to the release. SiteValue Tool (restricted) The tool provides the Site Value based on the inputs (existing on site license items) to support calculating the right amount of license items for Upgrade-Order of your Desigo CC System On-line Help (unrestricted) Provides comprehensive support for the engineering and the operation of the system. Document number and link Desigo CC: A6V Cerberus DMS: A6V Desigo CC: A6V Cerberus DMS: A6V Desigo CC: A6V Cerberus DMS: A6V Desigo CC: A6V PICS: A6V Desigo CC Intranet Page: Link Desigo Distribution Share Site Value Tool: Download Desigo CC On-line Help: Link A6V

29 Technical Documentation 9 Cybersecurity documentation Cybersecurity Guideline (restricted) Designed to provide the customers IT department, system administrators, field engineers and service technicians with technical information about the security guidelines and controls to be applied to a product of the Desigo CC product family. They describe the permitted applications for the intended operational environment as well as security-related information for maintaining security in the life cycle of the system. FAQ SharePoint (restricted) The Desigo CC FAQ s are provided to you to answer questionnaires regarding Desigo CC. Since these questionnaires often also contain cybersecurity questions, we have collected previous questionnaires and condensed the questions and answers in our FAQ. PSS Information SharePoint (restricted) Answers to Cybersecurity questions not provided by the FAQ require involvement of the local PSS representative. Members of the PSS organization can access the restricted cybersecurity information in the secure SharePoint. Providing these answers to customers require a NDA and legal support. Desigo CC: A6V Cerberus DMS: A6V FAQ: Link PSS SharePoint: Link The documents and tools classified as Restricted are intended for Siemens employees and third parties (e.g. suppliers, customers) collaborating with Siemens only. This means that it is possible to share Restricted documents with third parties that are interested in our product on a need-to-know basis, without the need of a signed NDA. However, distributing these documents to the open public or publishing it on the internet is prohibited. A6V

30 10 Released software components and related version Delivered and owned by BP 10 Released software components and related version These components are part of a full HQ V5.0 software distribution. Listed components provide their specific release notes. The final Extension Modules that are available to you in the local distribution might differ from this list due to customization / regionalization performed by your regional Desigo CC Distribution Manager Delivered and owned by BP Component Version Platform PROD Installer Advanced_Reporting Advantronic_AD300_ AdvReports_AIC_ Aguilera_AESA-Cx_ ANG Apogee_BACnet Apogee_BACnet_TEC Apogee_Graphics Apogee_P Apogee_P2_BACnet_Server Apogee_P2_TEC Apogee_System Application_Host_Base BA_Modbus BA_Pharma BACnet_Server BACnet_Standard BACnetFire_Standard BAS_Common BAS_EN BAS_NA_Pack BIM_Viewer CalendarSynchronization CEI-ABI_ Cerberus_Pro_EN Cerberus_Pro_GB Cerberus_Pro_UL Cerberus_Pro_XL_UL Climatix_AirSystem_ Climatix_BACnet_ A6V

31 Released software components and related version Delivered and owned by BP 10 Climatix_HeatingSystem_ Cloud_Connectivity CMSI_STT Comark CS6_Guarto_ D3_Visualization Desigo_Connect Desigo_Fire Desigo_Fire_XL_UL Desigo_PX Desigo_System Desigo_TRA DI_Migration DMS_AT DMS_Common DMS_EN DMS_UL DMS_ULC ecar Edwards_EST3_ Electrical_Common Energy_Reporting EnergyAndPowerManagement_Common Engineering_Console Enlighted_EnergyManager Fibrolaser_III_ Fire_3rd_Party Fire_Brigade_Map Fire_WAN FireDomain_Libraries_Common FireDomain_Libraries_EN Firefinder_XLS_MXL Firefinder_X-net Flex_Client GAMMA_KNX Graphics_Tools Hanwha_Samsung_SSM Haystack_ HelvarLighting_ Honeywell_Esser_ IBASE IEC IEE_OccupancyTool_ A6V

32 10 Released software components and related version Delivered and owned by BP InfoCenter Intrepid_RPM_ Intrunet_SPC KabonaWDC_ KNX Legacy_Systems Managed_Meters M-Bus MeteoblueWeather Meter_IEC MM8000_Conversion_Tools MNS Modbus NCC_Conversion_Tools NetworkWizard NodeMap Notifier_AM_ Notifier_ID3000_ Notifier_Onyx_ OAP_Protocol_ OPC_DA_Client OPC_UA_Client Operator_Tasks Oracle_FIAS OZW_ PowerManagement_IEC61850_ PowerManagement_Modbus PowerManagement_Modbus_ Powermanager ProductPromotion Push_Notification Riello_UPS_ RoomBooking_Common Scalance_ SCAME_S81HS_ Schindler_LV Scripting Scripts_EventsReactions_ Securiton_SecuriFire_ SecurityDomain_Libraries SelestaVAM_OPC_ Sensitron_Multiscan_ Siclimat A6V

33 Released software components and related version 3rd party necessary pre-requisites 10 Signify_ Simatic_S Sinteso_FS20_EN SiPass Siport_Modbus SMC SNMP_Agent SORISDriver TBS_AT TBS_EN TBS_UL TBS_ULC TJM_CMMS_ TOA_IP_Intercom_OPC_ UAE_Customization_DMS_ UPS_RFC1628_ URVE_RoomBooking_ VIDEO VirtualDevices_BldgData WeatherForecast_ WSI Zenitel_AlphaCom_ rd party necessary pre-requisites Prerequisites provided Version Microsoft Visual C Redistributable x Microsoft Visual C Redistributable x Microsoft Visual C Redistributable x86 SP Microsoft Visual C Redistributable x64 SP Microsoft Visual C Redistributable x Microsoft Visual C Redistributable x Microsoft Visual C Redistributable x Microsoft Visual C Redistributable x Microsoft SQL Server Express Edition Microsoft SQL Server System CLR Types Microsoft SQL Server Management Objects Microsoft SQL Server Native Client OPC Core Components Automation License Manager 6 Siemens License Management WinCC OA A6V

34 11 Open known issues and recommendations 11 Open known issues and recommendations The following open issues are known as the time of the release. They are not solved with this market delivery, but we provide some recommendations / workarounds for them. Support Request Internal Number Issue NA Temporary Network Disconnection causes Windows app clients to shut down Windows app client and installed clients are over-sensitive to network interruptions. In the case of a short break in network communication the clients will shut down and re-login will be needed. NA Project creation fails in case of local user configured for HDB Service Account due to MNS For new installations, creating project with MNS DB before the creation of HDB causes the logins to be created on SQL Server in uppercase. The consequence of this is project creation failure. Workaround is to create HDB before creating the project to preserve the case of the logins on SQL Server Wrong proportions in generated PDF from reports with graphics The issue is related to handling of small graphics. The original ratio width/height might not be maintained distorting the image. The workaround is to resize the original graphics Alignment of graphics differs between Installed Client and Flex Client In installed client, graphic displayed is anchored at top left corner, however in Flex client, graphic displayed is centered Desigo CC v5.0 and Remote SQL Server The Notification database can only be deployed on the local machine where Desigo CC server is installed. At this moment there is not known workaround rather than using a previous version of Desigo CC when this is an unavoidable project request. HDB can still be deployed on a remote SQL server A6V

35 Fixes for known issues / requests Fixes for known issues / requests This table provides the list of all issues or requests where a corrective action has been delivered with V5.0. The internal number has been left in case you need to refer to it when talking to your Support organization or any HQ representative. Support Request Internal Number Title Notification Class Bulk Editor does not always clean correctly Manager may block until restart Engineering Help Documents section FT 5.0 Desigo CC FlexClient Alarm / Notification bar is not corresponding to the user profile in norm FTV5 and V4.2 Run Script from Graphic doesn't work in Flex Client Project upgrade from 4.1 to 4.2 is failing. Appears to be getting hung up on the Apogee P2 driver Desigo CC Online Help files need to be updated to include the max # of AEM networks FT 5.0: Assisted Treatment doesn't start > instate Investigative Treatment loading FT5.0 Spin button control does not work in installed client KNX commands work randomly with 15 IP Routers configured EventRights Show Problem with Command Groups right "Event" FTV5 Upgrade User Setting from CC v4.2 to CC V FT 5.0: Alarmcounter and number of alarms in eventlist inconsistent on Client (video) Project Restore Template_BA_EN Extension «Scheduler» PLC STOP with Siclimat scheduler application for local scheduler in DesigoCC v FT 5.0: operator switchover does not work in Closed mode FT5.0: VMS Service fails to connect FT5.0: DRA Event collection (RSta/RSegmSta) Snap-in without contend for WPF clients FT5.0: Applications focus Text not actualized on Flex Client SiPass driver not able to connect at SiPass server Alnylam Norton - Desigo CC MP4.1 Missing licenses for Scripting RGD XNET Ownership SMC Post-Installation ReadMe.txt Online Help Installation - Collection of erroneous content Upgrade Automatic assignment of Flex Client Profile to Users with Client Profile = DMS_Lite_UI Online Help Documentation of Web Client and Flex Client Incorrect\Missing reset function for alarms at plant level Global objects are not mapped correctly to the Logical View Cursor for user switching in closed mode DesigoCC MP4.2 - Some tree elements are shown in English when the default language is NL_nl A6V

36 12 Fixes for known issues / requests Wrong Icons Reference in the HQ Text Group Sabotageversuche werden dargestellt, daher Karenzmodus System Distribution client settings FT_V5.0 Reports: Condition filter "Test Non Manual" doesn't exist for Sections FT5.0: Trend Calculation snap-in does not support managed type TrendLogS FT5.0: Not possible to upgrade projects BACnet Driver stops working after 1-2 days and system is unusable. PDU Pool Errors EventSummary entry: for EE object events random missing supervision object reference FT 5.0 Click Once Application --> Scheduler not working FT5-0 Network Wizard instance number not in summary QualityGood not correctly set for trend services (NORIS) Samsung Hanwha - Documentation: Add limit of SSM SPC driver hang up later SPC configuration re-import Desigo CC will not collect 24 Hour Trend Intervals in P2 Panels Wrong text group assigned when importing PX controller FT5.0: Library import Talon Distribution of DCC 4.2. BACNET STANDARD if failing the release date check Virus protection trips on dll in MNS installer resources Field Test - SMC Removing and Adding EM from the project results into wrong behavior FT: EverRun testing, project upgrade from 4.2 to fails MP5.0 FT Open ID Provider FT5.0: Desigo CC - Graphic Template CHAR, HVRC block BACnet Serve: Units mismatch FT5.0: Alarm suppression event MP5.0 FT Library New functionality: Copy localization from above customization level Tomcat running in DMZ is not supported FT5.0 Flex Client does not use State parameter for OIDC Authentication request FT5.0 Flex Web-Application uses wrong content-type in OIDC Token request Faulty German translation of alarm suppression Enlighted SORIS adapter - Issues with plug load FT 5.0 Filtergroup on VL flag set in Object Model FT5.0: RENO migration to Notifications failed during the upgrade process FT 5.0 Flex client 'Document' snap in is not the default for Document FT 5.0 CC Client migration - documentation for required manual configuration FT5.0 - NOTIFICATION Project Upgrades fails CC Client restarts with Chinese A6V

37 Fixes for known issues / requests DesigoCC MP5.0 Field Test - NK Firmware not copied/available under project folder Special characters in CNS Node path causes Advanced Reporting scripts to fail to run DCC v4.2 - Operator Tasks are removed from the project if a Remove Event is done by the SMC FT: EverRun testing, SQL Server 2014 manual installation procedure to be documented FT: EverRun testing, the prerequisite Microsoft Application Request Routing is shown failed Management Station Schedule shows wrong value FT5.0: Alarm suppression motion detection not works Advance Reporting BIRT exception No access to view this report FT5.0 : No customize button during installation to select custom EMs FT5.0 BACnet Driver stops working if AlarmTable is wrong configured FT5.0 FlexClient Profile in User settings is empty FT5.0 after Project upgrade all Users lost the Language Upgrade to v4.2: some of the LastValue flags on instance level are lost after upgrade #COM for subpoint AI 3 for any device running DI Data Migration - trend log seen as trend log multiple FT5.0: Graphics viewport and navigation selection CC V4.2 Oracle FIAS Integration - HotelRoomComfort Script does not command points FT5.0: Operator tasks - "Due date" option is not updated correctly once task is started Media group not available if parent node name is equal to managed meter name DCC V4.2 - Apogee Point Editor - "Device is unreachable" error from Hierarchical Server Desigo CC V4.2: BA_HVAC_PX_HQ_1 German Enabling Alarm Suppression with a Macro or Reaction with target = Scope definition Modbus device mess after device import in Distributed System I: Temperature reading in Celsius KNX Integration with multiple IP Routers on big projects Alarm category filtering in log viewer crash of the installed client when report is defined as favorite location -> German date for start- and stop-time to delete or archive not possible Asking to change the PVSS logs severity for the Sinteso IC points Enhancement Request for symbol "DYN_2D_Light_None_Binary Input_Central_003" HdbReader crash blocks trend clients until CoHo/CCOM Manager restart Desigo CC V4.2, report is not working DCC v4.2 - password/comment not asked on Validated point if used in Management Station Scheduler DesigoCC v.4-spc3.8.5 Event Time Sync Limit PXC4/5: 'Name extension' for project specific description text > A6V

38 12 Fixes for known issues / requests duplication! CDC Desigo CC MP4.1 Xeon machine CATD not able to print proper Journaling UL template missing TRA Lighting segments not visible on graphic Program Editor for allowing illegal characters into the system P2 Alarm Destination Insight is getting removed when Desigo is added Lost connection to S7 datapoints PXC4/5: Trend 'Name extension' mechanism lead to wrong description - ON is correct Upgrade - Red Ball caused by Dynamic Link Providers Stopped Working After installing 4.2, CoHo is growing in memory due to CoHoApogeeBACnet Commanding WritePrio property of a Apogee P2 Point symbol does not work on a FlexClient Graphic Desigo CC MP4.2 Tampered Script Trouble Event Log Viewer:"\" character can't be used in filter KIOSK profile does not work in DCC V4.X Apogee Zone Mode point Release command does not operate correctly using SI Object Model Facade thread CoHoDirectoryServiceIntegration blocks on synchronous connection to ldap server DesigoCC MP4.2 - datapoint not subscribed for commands enable status Documentation: Configuring the VideoApiService Account [-> CC V5.0] FT4.2: Graphic jump to the wrong depth and place SMS Gemalto EHS6T-USB GSM modem Desigo CC SMS GSM Provider Settings request Consistency Checker Windows and columns Flex Client Target does not work with Scheduler link Excel report output is incomplete DesigoCC on line help - NK823x Cannot add aggregator to view in child project from data master Desigo Data Migration: user designation problem new S7 import in 4.2 fails LDAP user group synchronization fails for sub-domain Flex Client Priority Array visualization problem on First Opening Flex Client Priority Array visualization problem for PX Flex Client MultiState range Min Max OZW - Adapter Template CSV CC V4.1 Scripting trenddatareadsync() errors Setpoint symbol does not work after upgrade DesigoCC MM8000 importer BS_AT and 4.2 DMS_AT Extension Modules are missing in the final 4.2 distribution WinCC Online-Backup Target path Command request timeout expires frequently for ldap user group synchronization A6V

39 Fixes for known issues / requests HD2 files are accumulating due to NaN value Import STT Mismatch 'event summary count and -list icon' for Mgt-Station alarmsscope rights 'read only' Running Advanced Reports via reactions not stable. Not all reports are generated DesigoCC and notification from assisted treatment Gms-birt web application causes Java heap space out of memory exception Enlighted Sensors shows #COM value for Light Level although they are normally working Desigo CC commands 3rd party BACnet UInt MSV points with Enum data type after point release Adv Reporting uses too many client licenses One-Installer - different behavior running the one installer twice when SNMP Properties are showing #COM when don't have an OID configured It should explicitly be documented whether a remote tomcat instance is supported or not Hierarchy root link in import snap-in is not retained between Siclimat and S7 imports supporting of Cyrillic SMS sending through GSM in DCC v Engineering Step by Step help: Importing BTL Library needs more details OneInstaller - Not possible to add Languages h,x diagram help is not available anymore in CC V Desigo CC V4.2 - Issue on manually modifying the Logical View Desigo CC - BA_HVAC_SICX_HQ_1 library Symbols DYN_2D_Pump_None_PuMdlt3ST_SICX_ALL_001 wrong values Custom RX application concept import Desigo CC causes PX Lon controllers to enter comms fail - BACnet Buffer Overflow Help about Consistency Checker and new section for FlexClient troubleshooting Notification type property contains odd German translation IBase Extension Module Is Not Valid For Upgrade" when upgrading to DCC 4.x Views are erased during import of CC Advanced Reporting Apache Tomcat vulnerability Error while reading point when selecting Apogee Point Editor SnapIn SCOPE different behavior installed client and Windows App Client Event List stays in background when pressing on alarm category button Samsung- Help links empty CC 4.2: Specific Scope rules lead to empty line in Views dropdown list Defect SMC generated certificates are rejected by ios 13 devices has not been fixed Desigo CC 4.1 Flex client navigation issues SNMP Driver limitations Apogee Panel Point Log report not working if Enhanced Alarm Setpoint A6V

40 12 Fixes for known issues / requests is used Graphic command symbol is not working correctly KSSB Desigo CC MP3.0 to MP4.1 upgrade, XNET Driver is broken Invalid NetworkDP instance on all Nodes Document Viewer does not show login prompts Apogee Functions at Project Level are missing CNS Node. Can't customization Function After upgrading to 4.1 from 3.0, scheduled reports are failing to be written to folder Application OCC CLG STPT, OCC CLG PRIORITY and OCC HTG Disappear from Contextual Pane AnderShd object: Release Priority fails = user operation 'Auto' Automatic investigative Treatment will not execute if an alarm is already selected in the Event List Selecting DL2 for CTRL ADDRESS on 2023 from Click Once is overloading DCC Web Clients can't access graphics and gets HTML Error 500 Internal Server Error Problem Assisted Treatment I/O's on NK8235 on a DCC - What is the Event Enrollment of the NK823x? I/O's on NK8235 on a DCC Inconsistent moving of graphic elements when using several depths and layers Duplicated Views description makes Views cannot be read FT4.2 : Ellipse Color-Fill not displaying correctly in Flex Client when used in evaluation FT4.2 : Selection Reference not working in FlexClient FT4.2 Plot graphic wrong size in PDF FT4.2: Advanced CAD Importer - different position of elements Evaluation on Text's Disabled Property does not work Zone Schedule Reports does not show all listed Overrides FLN Device Commander only commands 1 FLN device when commanding multiple of them Hide BACnet Events return during a GetEventInfo from BACnet driver GMS_APOGEE_TEC_APPL_2299_EN Object model only has 6 DOs, not 8 DOs SMC history task info Size property for archive groups FT4.2: Advanced CAD Importer - different symbol size from v In Graphic Commanding Alarm Delay Off is missing FT4.2: Excel Report output shows no Comments FT4.2: Systemmanager crashes when deleting a report output in GUI FT4.2 Flex Client: Target does not work for substitutions in symbols Desigo 4.1 flex client constantly showing window to choose certificate customer would like the option to hide Alarm Suppression in extended operations TRA template "TRA_APP_Room_Hvac12_None_011" shows supply air duct A6V

41 Fixes for known issues / requests FW: Desigo CC behavior with Windows entry Mode Chinese DCC 4.1, Reaction wrong trigger activated after verified condition System NOT Properly running, CCom exceptions Missing German localization in Operator Tasks Names of stations not shown in client settings FT4.2: Help - missing chapter 'BACnet editor' at section: Engineering Step-by-Step & Engineering Ref Desigo CC 4.1 Missing French UL Translations OPC UA Wrapper application stops working every couple of days FT4.2: Operation pane > multiselect info instate DRA room context FT4.2 - Notification Übersetzung: Ereignisauslösung - Whar FT4.2: BACnet Server language problem Windows Closed Mode in limbo FT4.2 Powermanager shows blinking legend FT2 V4.2 - Open Template Graphics via Related Item > show no online values Video distribution - Not possible to select or deselect cameras Trend Table using a resolution that doesn't work for TrendLogs FT4.2 - Advanced CAD Importer: Error message is not clear if no placeholder available [FT4.2] PXC4/5 offline trend feature - dynamic link provider does not ensure Related Item entries FT4.2 - Graphics links not displayed on Installed Client A BACnet point's Present Value's Min/Max values are overridden after rediscovery Scheduled delete does not work for activity log of orphaned alarms DESIGO CC as OPC Server: OPC Clients are updated with wrong older values FT4.2: Hide for Function not applicable Mapping Pages FT4.2: Generated page only considers Hvac application no Segments with Shd, Lgt only FT4.2: Existing attribute show not always the reliable state DCC FT4.2: Flex client shows #COM in graphics for fire objects Eclipse data set preview reports invalid wsi url for RawTrendSeries table Reports generate 'No text available for culture: en-gb in PVSS_II.log Desigo CC Event enrollment, disappear in Desigo after rediscovery FT4-2 Auswahl von Softlinks macht alle Elemente zu Softlinks Desigo CC FT4.2: Help generation warnings rd party device rediscovery causes AV resolution to change with override protection enabled DCC MP4.1 - Reports do not create the related PDF document on local disk DESIGO CC et STT View Builder name conflicts FT4.2 Advanced CAD Importer warning log after analysing not clear Database error HY000 - Connection is busy with results for another command - HD2 files accumulating. A6V

42 12 Fixes for known issues / requests Desigo CC - Scope and Graphic command symbols Page Setup DesigoCC V Error on German Help New symbol styles first after Client restart available Graphic Plot cropped in PDF Catching.exp file errors in PX import preprocessing phase issue with date format in DCC reports click once pending event not available on installed client Desigo CC 4.0, custom unit conversion does not work Desigo CC Windows App Client - Scripting Tomcat port conflict Restart of a system or a restart of the ctrl manager reports all systems as disconnected Execute 'Alarm Suppression' > random it does not respond (observed on Ahu level) Operation Task EM added: Server not running properly at every restart DRA 'build object name' = 'Skip' option not considered in the Logical View (Node 2nd : N) Project V4.0 to V4.1 migration > for TRA used/set 'not applicable' flag lost Multiselect of the same Object in a Graphic Desigo CC MP4.1 - GMSBool cannot display empty string TxG value enlighted integration from EM on cloud Invalid object references after reimport of Sinteso FS20 data CC V4.1 Flex, navigation leads to an undesired change of view Bacnet driver cannot start in case of wrong order in progs file Scheduler-Crash Desigo CC - System Manager restart EDE import fails if object instance is >=10000 and Hierarchy is present Trend Viewer: wrong visualization in case of LOG_INTERRUPTED Message text is not updated in Desigo CC when alarm goes to-normal after it's acknowledged Desigo CC_ v4.1 Flex Client, trend tooltip disappears too fast DRA Sched: Command from DCC > wrong datatype written to Sched Reports nl_nl language error HelpOnline - CSV file for OMs RENO alarm status fixed to en-us Schedules-Siclimat-OS function in multiserver and supervisor environment Desigo CC - EventLis behavoîour for the Event Cause is different from previous version Siclimat Scheduler are deleted in application view GmsIisAuthentication module uses only TLS 1.0 for CCOM connection Desigo CC in different Timezone, UTC, server, client and device InGraphic Commanding: Translation for Disable/Enable is wrong BACnet schedules are not saved when leaving the snapin A6V

43 Fixes for known issues / requests NodeMap: View smaller and bigger Desigo CC - Operator Task V4.1 - Add Menu etc (no localization available) Graphics - Evaluation on CommandTrigger property does not work Desigo CC V Courtesy mode DESIGO CC - Advance CAD Importer localization in de-de Desigo CC 4.x - Change Requests in Online Help Operator Tasks: Command texts has to be changed and improved SNMP - "No alarm on source time invalid" flag not working Points with Chinese descriptor show garbled in Desigo CC when discovered Schedule configure output to an SPC area mode Desigo CC - Global OPC library - OPC Server OM Alarm suppression enabled icon not shown on summary bar for WebClients Graphics changes made on the web client/windows App Client not modified the related.svg file CoHoBacDisc is not releasing BulkOperation thread CR for add more information on the Help on Line regarding the export of graphics in DWFx format For EventEnrollment events > Acknowledge Transitions are not consistent CR for add more information on the Help on Line regarding how to prepare the CAD file with AutoCAD Not all FS20 points are shown on graphics in Operation mode due to wrong Object references Report Manager in blocking state Problem with the report manager. CPU load Stuck Getting error "unhandled error in system manager system restarting" Desigo CC 3.0 SR2 OPC Server Not Accepting Commands maxgap config property is wrongly documented in the WinCC help User designation: Duplicated 'Name' in Textual Viewer if the Objects are within the same OBM Multi selection doesn't work as expected in Operation pane Notifications are not displayed for the desigo cc the Mobile App on Android 8.1 and higher AD users with special characters (comma) in the name are not synchronized by LDAP in DCC v Long term storage and archive problem Trend Viewer: Table chart doesn't apply the localization customization Unexpected error when opening the BACnet Editor tab with driver running in configuration mode Desigo CC &ndash DateTime command Picker Trend value misaligned in legend Images are not displayed on birt reports BACnet Scheduler does not show the exceptions correctly in certain situations Desigo CC 3.0, on a P2 site, editing programming in Desigo, wipes lines of code at Insight A6V

44 12 Fixes for known issues / requests Import\Drag & Drop of DWG-files is not possible by using Windows App Client DE version, TrendViewer Printout: in the footer Page is written in English and not in German number of object not displayed during Multi Select Desigo CC: CSV import issue Please refer overview tab for root cause analysisregin controller integration: error during scheduler save Desigo CC - Multiselection in Text-Viewer Adding an output to a PX BACnet Sched block doesn't work, after saving the output disappears Driver log file grows unlimited Document on How to create Root/Host Trusted Certificate in dedicated environment At least one service not running properly Desigo CC - DWG import not working Indications in online Chart (CC Client) and printed report differ completely [FT 5.0] Flex Client: The Graphic page has different resolution and alignment FT 5.0: Notification Class Bulk Editor shows partially no information and can crash FT5.0 - Flex client shows event indication The same data point multiple times in user defined view RENO stop button not working in event list in Desigo CC DesigoCC and SPC - Hot fix request for V4.0 and V FT: DCC de-de descriptions in Operator Tasks need to be revised FT5-0 Operator Tasks fire tasks are not translated to de-de Cybersecurity Guidelines DOC: SPC subsystem displayed with cameras Video integration on remote webserver on DMZ(reverse proxy) FT4-2 SIGMASYS text remote transmission not translated (3.12) Scopes of Algorex data points DesigoCC ver 4.2 Help on Line and Block Command DCC Historic Database Manual Administration Model - Autogrowth settings Backward combability PvssString Type in graphic page Automatic PDF print is empty A6V

45 Contact Contact Dario Incorvaia Program Manager and Product Management SI BP DB BMS Raphael Wespi New Product Introduction Manager SI BP S&C MK NPI Theilerstrasse 1a, 6300 Zug, Switzerland Theilerstrasse 1a, 6300 Zug, Switzerland [email protected] Paul Gadola Technical Support SI BP S&C CS&TR CS-SRA Roger Zaeh Training SI BP S&C CS&TR TR Theilerstrasse 1a, 6300 Zug, Switzerland Theilerstrasse 1a, 6300 Zug, Switzerland [email protected] Pinar Celik Marketing Desigo SI BP S&C MK SRA Theilerstrasse 1a, 6300 Zug, Switzerland Stefan Ikehata Marketing Cerberus DMS SI BP S&C MK FS Theilerstrasse 1a, 6300 Zug, Switzerland [email protected] Americas Middle East & Asia Pacific Scott Koncel Rollout Management Region AM SI BP AM SRA SFT 1000 Deerfield Parkway, Buffalo Grove, Zhi Qing Sheng Rollout Management Region MA SI BP MA MK&CS MK 1, Fengzhi East Road, Xibeiwang, Haidian, , USA Beijing, , China [email protected] A6V

46 Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Siemens Switzerland Ltd, 2021 Technical specifications and availability subject to change without notice. A6V