User s Guide [Advanced Function Operations]

Transcription

1 User s Guide [Advanced Function Operations]

2 Table of contents 1 Introduction 1.1 Welcome User's guides User's Guide Use conditions Conventions used in this manual Symbols used in this manual To use this machine safely Procedural instruction Key symbols Original and paper indications Original and paper sizes Original and paper indications Overview 2.1 Overview of each function Supported function table Key layout after the function is expanded Functions available with expanded functions Assigning Application Keys 3.1 Overview Key layout after the function is expanded [Application Menu] Customizing the application keys 1 and [Application Key Settings] Web Browser Function 4.1 Overview Available operations with the Web Browser function Specifications Specifications for Web Browser Restrictions on Flash Player Displaying Web Browser Configuring settings to enable use of the Web browser Restricting the use of the Web browser in the MFP [Web Browser Setting] Restricting the use of Web browser for each user [Function Permission] Restricting the use of local contents [Web browser contents access] Basic operation Screen components Operating instructions Operation using the Touch Panel Operation using the Keypad How to enter text Entering text Screen display mode [Normal] bizhub C360/C280/C220 Contents-1

3 [Just-Fit Rendering] [Smart-Fit Rendering] Specifying speaker volume Toolbar Description of the toolbar [Favorites] - [List] List of favorites [Favorites] - [Add] [Address] [History] [Display History] [Print] [Menu] Configuring the Web Browser settings [Page Operation] [Display] [Manage windows] [Settings] Printing, displaying, or saving a document file Printing a document file Displaying a document file Saving a document file Uploading a document file Restrictions Uploading a scanned document file Uploading a document file in a User Box PageScope Web Connection (Web Browser Function) 5.1 Using PageScope Web Connection Prior check How to access Screen components Logging in and logging out Login Logout Using the User Box function Open User Box [Open User Box] [File List] Document operations Printing a document Deleting a document Image Panel 6.1 Overview Features Displaying the Image Panel Operating Image Panel Screen components General operation Reading a document Scanning a document Retrieving from User Box Retrieving a document from an external memory Using data saved in a cellular phone or PDA bizhub C360/C280/C220 Contents-2

4 6.3.4 Editing the document [Preview] [Document/Page] - [Edit Document] [Document/Page] - [Combine Documents] [Document/Page] - [Document Settings] [Return to Scan Dest.] Specifying a destination Printing Specifying destinations Saving a document in an external memory Checking the send tray Send Tray [Check TX Tray] Sending data from a cellular phone or PDA Registering a photo in the address book Specifications of photo data Registering photo data Customizing Image Panel Customizing the Read Data area Customizing the Document Destination area Deleting a registered shortcut icon PDF Processing Function 7.1 Overview Available operations with the PDF processing function PDF document properties Encrypting PDF document and adding digital signature Password-based encryption Digital ID-based encryption Direct Print Searchable PDF function 8.1 Overview Precautions when creating searchable PDF files Recognizable character size Configuring the OCR operation setting [OCR Operation Setting] Configuring the searchable PDF setting My Panel Function 9.1 Overview Available operations with My Panel Customizable items Functions available by linking to the Web browser Functions available with Image Panel My Panel acquisition procedure Restrictions on using the My Panel function Displaying My Panel Main Menu Displaying Main Menu Customizing My Panel [My Panel Settings] Displaying [My Panel Settings] [Language Setting] [Measurement Unit Settings] [Copier Settings] bizhub C360/C280/C220 Contents-3

5 [Default Tab] [Shortcut Key 1] - [Shortcut Key 2] [Quick Settings 1] - [Quick Settings 4] [Default Tab Density Settings] [Scan/Fax Settings] [Default Tab] [Address Book Index Default] [Shortcut Key 1] - [Shortcut Key 2] [Default Address Book] [Default Address Type] [User Box Settings] [Default Tab] [Shortcut Key 1] - [Shortcut Key 2] [Color Selection Settings] [Main Menu Settings] Main menu button Registering a main menu button [Initial Screen Settings] My Address function 10.1 Overview Classification of address books Public address book My Address Book My Address Book acquisition procedure Restrictions on using the My Address function Registering and editing a destination Address Book Group Copying destinations between address books Copying destinations from the public address book to My Address Book Copying destinations from My Address Book to the public address book Using My Address Book when sending a document Specifying destinations Searching for destinations Index 11.1 Index by item Index by button bizhub C360/C280/C220 Contents-4

6 1 Introduction

7 1.1 Welcome 1 1 Introduction 1.1 Welcome Thank you for purchasing this machine. This User's Guide describes the overview and usage of functions available by registering an optional license kit to this machine, and functions available by connecting it to an application. To use each function effectively, please read this User's Guide User's guides Printed manual [Quick Guide Copy/Print/Fax/Scan/Box Operations] Overview This manual describes operating procedures and the functions that are most frequently used in order to enable you to begin using this machine immediately. This manual also contains notes and precautions that should be followed to ensure safe usage of this machine. Please be sure to read this manual before using this machine. User's guide CD manuals [User's Guide Copy Operations] [User's Guide Enlarge Display Operations] [User's Guide Print Operations] [User's Guide Box Operations] [User's Guide Network Scan/Fax/Network Fax Operations] [User's Guide Fax Driver Operations] [User's Guide Network Administrator] Overview This manual describes details on copy mode operations and the settings of this machine. Specifications of originals and copy paper Copy function Maintaining this machine Troubleshooting This manual describes details on operating procedures of the enlarge display mode. Copy function Scanning function G3 fax function Network fax function This manual describes details on printer functions. Printer function Setting the printer driver This manual describes details on the boxed functions using the hard disk. Saving data in user boxes Retrieving data from user boxes Transferring and printing data from user boxes This manual describes details on transmitting scanned data. TX, FTP TX, SMB TX, Save in User Box, Web- DAV TX, Web Services G3 fax IP Address Fax, Internet Fax This manual describes details on the fax driver function that transmits faxes directly from a computer. PC-FAX This manual describes details on setting methods for each function using the network connection. Network settings Settings using PageScope Web Connection bizhub C360/C280/C

8 1.2 Use conditions 1 User's guide CD manuals [User's Guide Advanced Function Operations] [Trademarks/Copyrights] Overview This manual describes details on functions that become available by registering the optional license kit and by connecting to an application. Web browser function Image panel PDF Processing Function Searchable PDF My panel and My address functions This manual describes details on trademarks and copyrights. Trademarks and copyrights User's Guide This User's Guide is intended for users ranging from those using this machine for the first time to administrators. It describes basic operations, functions that enable more convenient operations, simple troubleshooting operations, and various setting methods of this machine. Note that basic technical knowledge about the product is required to enable users to perform troubleshooting operation. Limit your troubleshooting operations to the areas explained in this manual. Should you experience any problems, please contact our service representative. 1.2 Use conditions Enabling i-option LK-101 v2 or i-option LK-103 v2 allows you to access the Internet from the Control Panel of the MFP. Users will bear a responsibility for contents accessed, downloaded, and uploaded using Web Browser in the MFP, and other communicated contents. Users shall conform to the company rules and laws of the country where this machine is used. Konica Minolta Business Technologies, Inc. and its group businesses will not bear any responsibility for use of the Internet by users. i-option LK-103 v2 may not be available depending on the area. For details, contact your service representative. bizhub C360/C280/C

9 1.3 Conventions used in this manual Conventions used in this manual Symbols used in this manual Symbols are used in this manual to express various types of information. The following describes each symbol related to correct and safe usage of this machine. To use this machine safely 7 WARNING - This symbol indicates that a failure to heed the instructions may lead to death or serious injury. 7 CAUTION - This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury or property damage. NOTICE This symbol indicates a risk that may result in damage to this machine or documents. Follow the instructions to avoid property damage. Procedural instruction 0 This check mark indicates an option that is required in order to use conditions or functions that are prerequisite for a procedure. 1 This format number "1" represents the first step. 2 This format number represents the order of serial steps. % This symbol indicates a supplementary explanation of a procedural instruction. The operation procedures are described using illustrations. % This symbol indicates transition of the Control Panel to access a desired menu item. This symbol indicates a desired page. bizhub C360/C280/C

10 1.3 Conventions used in this manual 1 d This symbol indicates a reference. View the reference as required. Key symbols [ ] Key names on the touch panel or computer screen, or a name of user's guide are indicated by these brackets. Bold text Key names on the control panel, part names, product names and option names are indicated in bold text Original and paper indications Original and paper sizes The following explains the indication for originals and paper described in this manual. When indicating the original or paper size, the Y side represents the width and the X side the length. Original and paper indications w indicates the paper size with the length (X) being longer than the width (Y). v indicates the paper size with the length (X) being shorter than the width (Y). bizhub C360/C280/C

11 2 Overview

12 2.1 Overview of each function 2 2 Overview 2.1 Overview of each function The following describes the overview of each function. - To use the advanced function, an optional Upgrade Kit UK-203 is required. - For details on the license kit registration and enabling functions on MFPs, refer to the [Quick Guide Copy/Print/Fax/Scan/Box Operations]. - To connect the function to the application, enable it at the application side. For details on enabling the function, refer to the manual for the corresponding application Supported function table The following table shows the supported functions for the license kits and applications. Web Browser Image Panel PDF processing i-option LK-101 v2 o o i-option LK-102 o i-option LK-103 v2 o o o i-option LK-105 o Searchable PDF My Panel My Address PageScope My Panel Manager o o Key layout after the function is expanded Adding the Web Browser function, Image Panel function or My Panel function changes the usage of the User Box, Fax/Scan, and Copy keys on the Control Panel. - The User Box key functions as an Application Menu, and the Fax/Scan and Copy keys function as application keys. - Press Application Menu to display the [Application Menu], which allows you to switch to the added function. - To fit the use status, the function to be assigned to the application key can be changed. For details, refer to page 3-2. bizhub C360/C280/C

13 2.1 Overview of each function Functions available with expanded functions The following describes the overview of each function. For details, refer to the reference described below. Function Overview Web Browser Image Panel PDF processing Searchable PDF My Panel My Address This function can be used by registering i-option LK-101 v2 or i-option LK-103 v2 in the MFP. By using the Control Panel of the MFP connected to the network, you can access to the Internet or intranet and display or print the contents. Also, through a Web browser, you can operate PageScope Web Connection of the MFP connected to the network and use documents saved in User Boxes. This function can be used by registering i-option LK-101 v2 or i-option LK-103 v2 in the MFP. Image Panel is a new intuitive and easy-to-understand panel interface. This panel helps you easily image the entire operation flow from loading to sending a document. You can add photo data to the one-touch destinations using Page- Scope Web Connection. The registered photo data is applied to the address list of Image Panel. This function can be used by registering i-option LK-102 or i-option LK-103 v2 in the MFP. Performs password- or digital ID-based encryption of PDF, adds a digital signature, and configures property settings when distributing documents in the PDF format using the scan or User Box function. This function is available when i-option LK-105 is registered with the MFP. You can create a text searchable PDF file by pasting transparent text data on the area of a document in which characters are recognized through an OCR process. You can create a searchable PDF file when saving or sending an original in the PDF format using the scan or User Box functions. This function is used in connection with the PageScope My Panel Manager. Available by centrally managing the environment of the Control Panel customized by the user depending on the application (My Panel), and then obtaining My Panel on the MFP selected by the user. This function is used in connection with the PageScope My Panel Manager. Available by centrally managing the personal address book (My Address Book) by the server, and then obtaining My Address Book on the MFP selected by the user. p. 4-2 p. 5-2 p. 6-2 p. 7-2 p. 8-2 p. 9-2 p When the accounting management device is installed in the MFP, Image Panel cannot be used. bizhub C360/C280/C

14 3 Assigning Application Keys

15 3.1 Overview 3 3 Assigning Application Keys 3.1 Overview The following describes the key layout and [Application Menu] of the Control Panel Key layout after the function is expanded Adding the Web Browser function, Image Panel function or My Panel function allows User Box to function as Application Menu, and Fax/Scan and Copy as application keys. - The Web Browser and Image Panel functions can be used by registering i-option LK-101 v2 or i-option LK-103 v2 in the MFP. - The My Panel function is used in connection with the PageScope My Panel Manager No. Name Description 1 Application menu Press this key to display the [Application Menu]. You cannot assign a different function to this key. If a function is added, attach a Application Menu sticker (included in the Upgrade Kit UK-203) to change the key name on the Control Panel. For details, refer to page Application key 1 The fax/scan function is assigned by default. The administrator can assign a different function to this key. If the function assigned to the key is changed, attach a sticker describing the new function (included in the Upgrade Kit UK-203) to change the key name on the Control Panel. For details on assigning a function, refer to page 3-4. bizhub C360/C280/C

16 3.1 Overview 3 No. Name Description 3 Application key 2 The copy function is assigned by default. The administrator can assign a different function to this key. If the function assigned to the key is changed, attach a sticker describing the new function (included in the Upgrade Kit UK-203) to change the key name on the Control Panel. For details on assigning a function, refer to page [Application Menu] Press Application Menu to display the [Application Menu]. To use a function not assigned to the application key 1 or 2, you can switch functions to a desired one from the [Application Menu]. bizhub C360/C280/C

17 3.2 Customizing the application keys 1 and Customizing the application keys 1 and 2 To fit the use status, the function to be assigned to the application keys 1 and 2 can be changed [Application Key Settings] To assign a function to the application keys 1 and 2, use [Application Key Settings]. 1 Press Utility/Counter to display [Utility]. 2 Press [Administrator Settings]. 3 Enter the administrator password, and then press [OK]. 4 Press [System Settings]. 5 In [System Settings] (2/2), press [Application Key Settings]. 6 Select an application key ([Key 1] or [Key 2]) to which you assign a function. bizhub C360/C280/C

18 3.2 Customizing the application keys 1 and Select a function to be assigned. 8 Press [OK]. The function is assigned to the application key. bizhub C360/C280/C

19 4 Web Browser Function

20 4.1 Overview 4 4 Web Browser Function 4.1 Overview The Web Browser function prints, displays, and saves contents on the Internet or intranet by accessing them from the Control Panel of the MFP connected to the network. - This function can be used on the MFP with i-option LK-101 v2 or i-option LK-103 v2 registered Available operations with the Web Browser function The Web Browser function allows you to perform the following operations. - Displaying and printing Web contents on the Internet or intranet. - Displaying, printing, and saving a document file on the Internet or intranet. - Uploading a scanned document file or a document file saved in a User Box to a server on the Internet or intranet. - Sharing documents in the User Box of MFPs on the network using PageScope Web Connection. - When the My Panel function is available, you can personalize the user operation environment of the Web browser by linking the Web browser with My Panel. d For details on using PageScope Web Connection from the Control Panel, refer to page 5-2. For details on My Panel, refer to page 9-2. bizhub C360/C280/C

21 4.1 Overview Specifications Specifications for Web Browser The following shows the major specifications of the Web Browser installed in the MFP. Item Specifications Browser engine NetFront Supported protocols HTTP (HTTP/0.9, 1.0, 1.1), HTTPS, TCP/IP Supported markup HTML 4.01, XHTML 1.1/Basic language Supported style sheet Part of CSS1 and 2 Supported script language Part of JavaScript 1.5, ECMAScript 3rd Edition, Ajax (limited to the scope supported by JavaScript) Supported DOM Part of Level 1 and 2 Supported format JPEG, BMP, PNG, GIF, animation GIF, PDF, Flash 7.0 and earlier Supported SSL/TLS SSL 2.0, SSL 3.0, TLS 1.0 versions Supported character codes Japanese (Shift_JIS), Japanese (ISO-2022-JP), Japanese (EUC-JP), Chinese Simplified (GB2312), Chinese Traditional (Big5), Western European (ISO ), Unicode (UTF-8) Normal, Just-Fit Rendering, Smart-Fit Rendering Adobe Reader LE Display mode PDF viewer Flash player Adobe Flash Player 7 Restrictions on Flash Player There are following restrictions on the Flash Player installed in Web Browser. - The function to generate an event by key operations is not supported. - The functions to paste or obtain data such as character strings from the clipboard are not supported. - The context menu is not supported. - The print function of Flash is not supported. - The functions to execute JavaScript from Flash or operate Flash from JavaScript are not supported. - The screen without a window (pop-up) is not supported. - The favorite function of Flash is not supported. - The function to communicate data in real time using the Flash Media Server is not supported. - The XMLSocket-based communication function is not supported. bizhub C360/C280/C

22 4.2 Displaying Web Browser Displaying Web Browser In [Application Menu], press [Web Browser]. The page specified as the home is displayed. - If a login user is using the Web browser linked to My Panel and the user presses [Web Browser], the Web browser setting and information related to the user is downloaded to the MFP from the server. If the user has specified a personal home page, that page is displayed. - When the Web browser starts, you can specify whether to display the home page or the last page that was visited. For details, refer to page d For details on the [Application Menu], refer to page 3-3. For details on My Panel, refer to page 9-2. bizhub C360/C280/C

23 4.3 Configuring settings to enable use of the Web browser Configuring settings to enable use of the Web browser If you do not want to allow use of the Web browser in the MFP, you can restrict its use without disabling the license kit. Also, you can restrict use of the Web browser for each user Restricting the use of the Web browser in the MFP If you do not want to allow use of the Web browser, you can restrict its use without disabling the license kit. [Web Browser Setting] 1 Press Utility/Counter to display [Utility]. 2 Press [Administrator Settings]. 3 Enter the administrator password, and then press [OK]. 4 Press [Network Settings]. 5 In [Network Settings] (2/2), press [Web Browser Setting]. 6 Select [Invalid], and then press [OK]. - If [Web Browser Setting] is set to [Invalid], [Web Browser] is hidden in the [Application Menu]. bizhub C360/C280/C

24 4.3 Configuring settings to enable use of the Web browser Restricting the use of Web browser for each user If user management is performed in the MFP, you can restrict use of the Web browser for each user. [Function Permission] 1 Press Utility/Counter to display [Utility]. 2 Press [Administrator Settings]. 3 Enter the administrator password, and then press [OK]. 4 Press [User Authentication/ Account Track]. 5 In [User Authentication Settings], press [User Registration]. 6 Select the user you want to restrict use of the Web browser, and press [Edit]. % If you want to restrict public users to use the Web browser, press [ ] and select [Public]. 7 Press [Function Permission]. 8 In [Function Permission] (3/3), specify [Web Browser] to [Restrict], and press [OK]. - This setting is not available if [Invalid] is specified in [Administrator Settings]ö[Network Settings]ö[Web Browser Setting]. - Configuring the function permission of the public user is available when public user access is allowed in [Administrator Settings]ö[User Authentication/ Account Track]ö[General Settings]ö[Public User Access]. - If users are managed in the external server, you can configure the default settings for function permissions to users who log in to the MFP using external server authentication for the first time. To configure it, select [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[Administrative Settings]ö[Default Function Permission]ö[Web Browser]. For details on [Default Function Permission], refer to the [User's Guide Network Administrator]. bizhub C360/C280/C

25 4.3 Configuring settings to enable use of the Web browser Restricting the use of local contents If the Web browser is used through the use of an application that interacts with the Web browser, you can access the files (pre-installed contents, image files, help files, etc.) saved in the HDD of the MFP from the Web browser. The administrator can restrict the use of files saved in the HDD of the MFP from the Web browser as required. - For details on the application that interacts with the Web browser, contact your service representative. [Web browser contents access] 1 Press Utility/Counter to display [Utility]. 2 Press [Administrator Settings]. 3 Enter the administrator password, and then press [OK]. 4 Press [Security Settings]. 5 Press [Security Details]. 6 In [Security Details] (4/4), specify [Web browser contents access] to [Restrict], and press [OK]. bizhub C360/C280/C

26 4.4 Basic operation Basic operation Screen components The Web browser screen has the following components No. Name Description 1 Toolbar Operates Web Browser or configure the Web Browser settings. It is always displayed on the Web Browser screen. For details, refer to page Scroll bar Appears on the right of the screen when all display contents are not displayed vertically in one screen. Appears at the bottom of the screen when all display contents are not displayed horizontally in one screen. 3 Window When multiple windows are displayed, you can switch the window using the tab located at the bottom of the screen. Press [e] in the active tab to close the window. 4 Icon The icon that represents the connection status appears when loading contents. If the optional local connection kit is installed in the MFP, the speaker icon is displayed. - When the optional local connection kit is installed in the MFP, sound from Web pages or Flash contents can be output through the speaker in the local connection kit. The speaker volume can be adjustable using the speaker icon. For details, refer to page bizhub C360/C280/C

27 4.4 Basic operation Operating instructions Operate Web Browser mainly on the Touch Panel. You can perform some of the operations from the Keypad of the Control Panel. - Using the Stylus Pen to operate the Touch Panel provides operating comfort. Operation using the Touch Panel Operate Web Browser mainly on the Touch Panel. - To select an item, press a desired item. - If a link is provided in the contents, press the link to jump to it. - If you need to enter characters, press the entry form in the dialog box or contents. The keyboard screen appears. To enter characters, use the keyboard screen. - To scroll the screen, press [ ], [ ], [ ], or [ ] on the scroll bar. Operation using the Keypad You can use the Keypad in the Control Panel to enter numeric values or select items in the list How to enter text If you need to enter characters, press the entry form in the dialog box or contents. The keyboard screen appears. Entering text Press the character you want to enter in the keyboard screen. - To enter uppercase letters or symbols, press [Shift]. - You can also enter numbers using the Keypad. - To change a character in the entered text, press [ ] or [ ] to move the cursor to the character to be changed, press [Delete], and then enter the desired letter or number. - To delete all characters entered, press C (clear) in the Control Panel. - To revert to the setting when the keyboard was displayed, press [Undo]. - Some buttons may not appear, depending on the characters being entered. - When entering character codes on multiple lines is allowed, the linefeed button appears. bizhub C360/C280/C

28 4.4 Basic operation Screen display mode There are three types of display modes for the Web Browser screen. [Normal] This is the display mode same as that for the normal Web Browser. Content is not adjusted to the screen size. Scroll the screen horizontally and vertically when browsing it. (The default is set to [Normal]. ) [Just-Fit Rendering] The content layout is maintained and a page is displayed by reducing its width to fit the screen. Scroll the screen horizontally and vertically when browsing it. [Smart-Fit Rendering] The table is divided and laid out vertically to fit the width of the screen. Scroll the screen horizontally and vertically when browsing it. The layout may be changed depending on the page to be displayed. d For details on changing the display mode, refer to page Specifying speaker volume When the optional local connection kit is installed in the MFP, sound from Web pages or Flash contents can be output through the speaker in the local connection kit. If a speaker is connected to the MFP, the speaker icon is displayed at the bottom left of the Web browser. Press the speaker icon to display the Volume screen where you can control the speaker volume. - To increase the volume one level, press [Higher], or the # key on the Control Panel. - To reduce the volume one level, press [Lower], or the * key on the Control Panel. - Pressing [Mute] outputs no sound. In addition, the speaker icon changes to the speaker mute icon. bizhub C360/C280/C

29 4.5 Toolbar Toolbar The toolbar on the top of the Web Browser screen allows you to perform various operations and configure various settings Description of the toolbar The following shows the functions of the buttons on the toolbar. Icon Name Description Back Brings you back to the previous page. Next Brings you to the next page. Reload/Abort Reloads the currently displayed page to update the contents. If you press this button while loading a page, the loading stops. Home [Favorites] - [List] Displays the page registered as the home. By default, " is registered. For details on changing the home page, refer to page Displays the list of registered favorites. For details, refer to page [Favorites] - [Add] [Address] Adds the URL of the currently displayed page to the favorites. Adding a URL to the favorites requires the administrator authority. For details, refer to page Brings you to the screen to enter a URL. For details, refer to page [History] Displays the list of pages displayed up till then. For details, refer to page [Print] Prints the currently displayed contents. For details, refer to page [Menu] Configure the Web browser settings. There are two types of menus; one for the user and one for the administrator. For details, refer to page bizhub C360/C280/C

30 4.5 Toolbar [Favorites] - [List] Press [List] to display the list of the registered favorites using the thumbnails. Selecting a favorite allows you to access the corresponding URL. - If the user is using the Web browser linked to My Panel, the list of favorites for the user who is managed in the server is displayed. List of favorites Item [List View]/[Thumbnail View] [Address View]/[Title View] [Delete All] [Close] Description Switches the favorites display between the list display and thumbnail view. Switches the display of favorites between the address view and title view. Deletes all registered favorites. Deleting the favorites requires the administrator authority. Closes the list of favorites. Press to display the list of operations available for the item. From this list, select the desired operation. The following shows the available operations. Item [Open New Window] [Edit] [Up] [Down] [Delete] [Close] Description Opens the selected favorite with a new window. Edits the title and address of the selected favorite. Editing the favorites requires the administrator authority. Brings you above the selected favorite. Use this button when the list of favorites is displayed in the list view. Brings you below the selected favorite. Use this button when the list of favorites is displayed in the list view. Deletes the selected favorite. Deleting the favorites requires the administrator authority. Closes this screen [Favorites] - [Add] (Adding a URL to the favorites requires the administrator authority. ) Pressing [Add] prompts you to enter the administrator password. Enter the administrator password and press [OK]. The registration screen appears. Check the contents and press [OK]. The URL of the displayed page is added to the favorites. The MFP can hold up to 100 favorites. - To register the thumbnail images of the page to be added to the favorites, select the [Register Thumbnail] check box on the registration screen. - It is registered with the title previously given to the contents. To change the title, press the entry form for the title on the registration screen, and then change the title. - For users using the Web browser by linking to My Panel, administrator authority is not required. My Panel can hold up to 20 favorites for each user. bizhub C360/C280/C

31 4.5 Toolbar [Address] Press [Address] to display the screen for entering the address. Press the entry form to display the keyboard screen. Enter the URL of the page to be displayed, and press [OK] or [Open New Window]. Press [Input History] to display the list of input history. You can reference the past inputs. The MFP can hold up to 100 input history records. - If you display the screen for entering the address, you see the URL of the page being displayed. To delete the URL currently shown, display the keyboard screen and press [Delete]. Press C (clear) in the Control Panel to delete all data entries. - If the user is using the Web browser linked to My Panel, the list of input history records for the user who is managed in the server is displayed. My Panel can hold up to 20 input history records for each user [History] Press [History] to display the display history screen. From the list of display history, select a page to be displayed again. The MFP can hold up to 100 display history records. - If the user is using the Web browser linked to My Panel, the list of display history records for the user who is managed in the server is displayed. My Panel can hold up to 20 display history records for each user. [Display History] Item [Address View]/[Title View] [Delete All] [Close] Description Switches the display history between the address view and title view. Deletes all registered entries in the display history. Deleting the display history requires the administrator authority. Closes the list of display history. Press to display the list of operations available for the item. From this list, select the desired operation. The following shows the available operations. Item [Open New Window] [Delete] [Close] Description Loads the selected display history with a new window. Deletes the selected display history. Deleting the display history requires the administrator authority. Closes this screen. bizhub C360/C280/C

32 4.5 Toolbar [Print] Press [Print] to display the Print screen. Configure the print settings, and then press [Start] or the Start key on the control panel. The displayed contents are printed. Item [Color] [Paper] [Simplex/Duplex] [Stamp Settings] [Finishing] Description Specify whether to print originals in color or black-and-white. Select the size of paper for printing. Select whether to print in 2-sided mode. Specify whether to print the [Title], [URL], [Date/Time], and [Page Number]. Configure settings for collating, grouping, offsetting. stapling, hole punching, folding, or binding. - If you attempt to print a Web page or JPEG or other image that takes up a large amount of memory, a scan error may occur and printing will be disabled. - The setting value of [Finishing] varies depending on which options are installed. The Staple settings are available only if the optional finisher is installed. The Punch settings are available only if the punch kit is installed on the optional finisher. The Fold and Center Staple & Fold functions can be used when a saddle stitcher is installed on the optional finisher [Menu] Press [Menu] to configure the Web Browser settings. There are two types of menus; one for the user and one for the administrator. For details, refer to page bizhub C360/C280/C

33 4.6 Configuring the Web Browser settings Configuring the Web Browser settings Pressing [Menu] in the tool bar displays the menu for the user. Users can only view the Web browser operation settings and information. The administrator of the MFP can configure the operating environment and security settings in addition to the Web browser operation settings. To display the administrator menu, press [Administrator] in the menu screen, and enter the administrator password [Page Operation] In the [Page Operation] tab, configure the settings for page operation. Item [Use for Home Page] * [Page Memo] [Save as Page Memo] [Zoom Display] Description Registers the displayed page as the home page. Displays the page saved as a page memo. Selecting the page memo from the list displays the corresponding page. Press to display the list of operations available for the item. From this list, select the desired operation. Saves the displayed page as it is. Press [Zoom Display] to display the key to enlarge or reduce the page display size. Press the key to adjust the page display size. - Items with * are displayed only for the administrator menu. - [Use for Home Page] is displayed for users using the Web browser by linking to My Panel [Display] In the [Display] tab, configure settings for displaying contents. The administrator of the MFP can configure the settings to hide or display images and animations, enable or disable JavaScript, and make detailed setting related to the contents display. Item [Display Mode] [Encoding] [Detail Settings] [Color Selection Setting] Description Select the display mode for Web Browser from [Normal], [Just-Fit Rendering], and [Smart-Fit Rendering]. For details, refer to page Specify the encode type to be used when displaying contents. Configure settings for displaying contents. <For administrator> [Image]: Select this check box to display images. [Animation]: Select this check box to display animation GIF. [Table]: Select this check box to recognize the table in HTML and adjust the layout. [JavaScript]: Select this check box to enable JavaScript in contents. [CSS]: Select this check box to enable CSS in contents. [Ward Wrap]: Select this check box to enable the word wrap in contents. [Line Boundary Char. Check]: Select this check box to enable the line boundary character check in contents. [Rapid-Render]: Select this check box to enable the Rapid-Render function. [Pop-Up Window]: Select this check box to allow displaying the pop-up window. [Offline Permission]: Select this check box to allow the use of the contents off-line. [Auto Flash Playback]: Select this check box to automatically play a Flash content. <For user> [Enable Offline Display]: Select this check box to enable viewing of the contents off-line. Displayed when [Offline Permission] is allowed by the administrator. Select a color for the selected item ([Green], [Blue], [Yellow], or [Orange]). bizhub C360/C280/C

34 4.6 Configuring the Web Browser settings [Manage windows] In the [Manage windows] tab, operate the window. Up to five windows can be opened. Item [Create new window] [Open in new window] [Close active window] [Close other windows] Description Displays the contents of the URL registered as the home page with a new window. Displays the link destination page with a new window. Closes the active window. Closes all windows. This is not selectable when only one window is open [Settings] The [Settings] tab allows you to check and reset the Web browser information. The administrator of the MFP can configure the operating environment and security settings of the Web browser. Item [Startup Settings] * [Security] * [Cookies] * [Cache] * [Proxy] * [Authentication Information] * [Access Log] * [Web Browser Information] [Reset] Description Specify whether to display the page registered as the home page or the last page being displayed when you exited Web Browser previously, at the startup of Web Browser. Configure SSL or TLS setting, or display a root certificate or CA certificate. Configure settings to receive and delete cookies. This menu is also used to delete all cookies saved in the MFP. Configure settings to use and delete caches. This menu is also used to delete all caches saved in the MFP. Configure the settings for use of proxy. To use the proxy, register the address and port for the proxy server. If proxy authentication is required, register the ID and password for use in proxy authentication. Specify the timing to delete the authentication information you have entered in the contents. This menu is also used to delete all authentication information saved in the MFP. Check for access history of all users. You can check the [ID], [User Name], [URL] and [Access]. Displays Web Browser information. Restart the Web browser. - Items with * are displayed only for the administrator menu. - The following settings are available for users using the Web browser by linking to My Panel. [Startup Settings] Setting for deleting [Cookies] Setting for deleting [Authentication Information] - My Panel can hold up to 20 items of cookies and authentication information for each user. bizhub C360/C280/C

35 4.7 Printing, displaying, or saving a document file Printing, displaying, or saving a document file If a link to a document file is provided in the displayed contents, you can print, display, or save the document file. - The PDF and XPS formats are supported for the document files. - You cannot display an XPS file. Press the link to the document file in the contents to display the top screen of the document file Printing a document file Press [Print] to display the Print screen. Configure the print settings, and then press [Start] or the Start key on the control panel. The document file is downloaded and printed. Item [Color] [Paper] [Simplex/Duplex] [Stamp Settings] [Finishing] Description Specify whether to print originals in color or black-and-white. Select the size of paper for printing. Select whether to print in 2-sided mode. Press this button to specify whether to print a [Date/Time] and [Page Number]. Configure settings for collating, grouping, offsetting. stapling, hole punching, folding, or binding. - If you attempt to print a document file that takes up a large amount of memory, a scan error may occur and printing will be disabled. - If the downloaded PDF is encrypted, it is saved in the Encryption PDF User Box without being printed. bizhub C360/C280/C

36 4.7 Printing, displaying, or saving a document file 4 - The setting value of [Finishing] varies depending on which options are installed. The Staple settings are available only if the optional finisher is installed. The Punch settings are available only if the punch kit is installed on the optional finisher. The Fold and Center Staple & Fold functions can be used when a saddle stitcher is installed on the optional finisher Displaying a document file Press [View] to display the link destination PDF file. The toolbar on the top of the screen allows you to enlarge, reduce, print, or save the PDF file. Key Description Brings you back to the top page. Brings you back to the previous page. Brings you to the next page. Brings you to the last page. Rotates the display 90 degrees clockwise. Increases the zoom ratio. Reduces the zoom ratio. Displays according to the width of the display area. Displays the entire page. Select the User Box to save the document file. Configure the print settings, and print the document file. Displays the splash window (displayed momentarily when the software activates). bizhub C360/C280/C

37 4.7 Printing, displaying, or saving a document file 4 Key Description Closes the screen Saving a document file Press [Save]. The User Box selection screen is displayed. Select the User Box to save the file, press[ok], and then [Start] or Start. Then the document file is saved in the User Box. - To save a document file to a User Box, you must register the User Box in the MFP in advance. For details, refer to the [User's Guide Box Operations]. - When printing a document file (full color) that was saved in a User Box from the Web browser, you cannot specify [Zoom] or [Combine]. bizhub C360/C280/C

38 4.8 Uploading a document file Uploading a document file If document files are shared on the server, you can upload a scanned document file or a document file in a User Box to the server using a Web Browser. This section explains how to upload a document file, using the following upload site as an example. Example Item [Browse] [OK] Description Press this button to select a document file to be uploaded. "type" is set to "file" in the Input tag of HTML. Press this button to upload a document file. "type" is set to "submit" in the Input tag of HTML Restrictions Note that there are following restrictions to use this function. - PDF, TIFF, or XPS is the type of a document file that can be uploaded. A document cannot be divided to upload. - Multiple document files cannot be uploaded at the same time. - The user cannot manually edit the file name text box. - If you perform one of the following operations after selecting a document file to be uploaded, the job is deleted together with the selected document file. The System Auto Reset function has been started. The Web browser has been closed. The upload site has been updated by operating the toolbar of the Web browser. The Web browser has been restarted. The user has logged out during login processing. The sub power switch has been turned off. Reset has been pressed to reset the panel Uploading a scanned document file The following explains the procedure to upload a scanned document file. - This procedure is not available for users who are disabled from scanning data. - The file format cannot be set to JPEG when scanning an original to be uploaded. 1 Display the upload site using the Web browser of the MFP. 2 Press the button to select a document file to be uploaded. % In this example, press [Browse]. bizhub C360/C280/C

39 4.8 Uploading a document file 4 3 Press [Scan]. 4 Place the original to be uploaded on the MFP. 5 Configure the scan settings, and press [Start] or the Start key. % If Proof Copy is selected, you can check finishing. After scanning is completed, the file name is displayed in the text box. 6 Press the button to start uploading. % In this example, press [OK]. Uploading of a document file then starts Uploading a document file in a User Box The following explains the procedure to upload a document file retrieved from a User Box. - This procedure is not available for users who are disabled from accessing the saved documents. - Before uploading a document file in a User Box, create a User Box to save the document file in. - Only the Public User Box and Personal User Box can be selected. - The file format cannot be set to JPEG when selecting a document file to be uploaded from a User Box. When selecting a JPEG document file saved in a User Box, the file format is changed to PDF. If necessary, specify the appropriate file format before uploading a document file. - When uploading a document file saved in a User Box while Page Separation is enabled, Page Separation is canceled and changed to Multi Page. 1 Display the upload site using the Web browser of the MFP. 2 Press the button to select a document file to be uploaded. % In this example, press [Browse]. bizhub C360/C280/C

40 4.8 Uploading a document file 4 3 Press the [User Box] key. 4 Select a desired User Box, and press [Use Document]. 5 Select a document file to be uploaded, and press [File Settings]. % Select multiple document files and press [Combine]; they can be combined as one file. The combination order can be changed as required. % Select a document file and press [Document Details] to check the date and time the document file was saved and to preview the image. 6 Configure the file setting, and press [Start] or the Start key. % Press [Application] to configure the stamp or page number print setting. The file name appears in the text box. 7 Press the button to start uploading. % In this example, press [OK]. Uploading of a document file then starts. bizhub C360/C280/C

41 5 PageScope Web Connection (Web Browser Function)

42 5.1 Using PageScope Web Connection 5 5 PageScope Web Connection (Web Browser Function) 5.1 Using PageScope Web Connection PageScope Web Connection is a device management utility that is supported by the HTTP server built in this machine. To use this utility, directly access the MFP connected to the network using Web Browser. To use this utility using Web Browser installed in the MFP, only the User Box function is available. This chapter describes how to use documents in the User Box of the MFP on the network by operating PageScope Web Connection using the Web Browser installed in the MFP. - This function can be used on the MFP with i-option LK-101 v2 or i-option LK-103 v2 registered. - i-option LK-101 v2 or i-option LK-103 v2 must be registered also in the MFP access destination. - For details on using the Web Browser installed in the MFP, refer to page To operate PageScope Web Connection from a Web browser of your computer, you can use various functions such as the status check, setting change, and network setting functions of the MFP. For details, refer to the [User's Guide Network Administrator] Prior check The most recent information may not appear in PageScope Web Connection screens because older versions of pages are saved in the cache for the Web browser. In addition, problems may occur when the cache is used. When using PageScope Web Connection, disable the cache for the Web browser. - Changing the cache settings requires the administrator authority. 1 Press [Menu] on the toolbar of the Web browser. 2 Press [Administrator]. 3 Enter the administrator password, and then press [OK]. 4 Press the [Settings] tab, and then select [Cache]. 5 Clear the [Use cache] check box, and then press [OK] How to access Start the Web browser, and then specify the IP address of the MFP to be accessed. 1 Press [Address] on the toolbar of the Web browser. 2 Press the entry form to display the keyboard screen. 3 Enter the IP address of the MFP to be accessed, and then press [OK]. 4 Press [OK] or [Open New Window]. The PageScope Web Connection screen appears. - If you have specified to not receive cookies for Web browser settings, PageScope Web Connection screen does not appear. For details on configuring cookie settings, refer to page If you display the screen for entering the address, you see the URL of the page being displayed. To delete the URL currently shown, display the keyboard screen and press [Delete]. Press C (clear) in the Control Panel to delete all URL entries. bizhub C360/C280/C

43 5.2 Screen components Screen components The PageScope Web Connection screen is constructed as shown below No. Name Description 1 KONICA MINOLTA logo 2 PageScope Web Connection logo Press the logo to go to the KONICA MINOLTA Web site ( Press the logo to display the version information for PageScope Web Connection. 3 Login user name Displays the icon of the current mode and the name of the user who is logged on (public, registered user, or account). 4 [Logout] Press this button to log out from the current mode. 5 Help Press this button to reference the online manual. 6 Contents display Displays the contents of PageScope Web Connection. bizhub C360/C280/C

44 5.3 Logging in and logging out Logging in and logging out If you have specified to perform User Authentication or Account Track on the MFP, the login screen appears after displaying PageScope Web Connection. - If you have not specified to perform User Authentication or Account Track, the screen displayed when you logged in as a public user appears. - To use PageScope Web Connection using the Web Browser installed in the MFP, its administrator mode is not available Login Select whether to log in as a public user or registered user. If External Server Authentication is selected, select an external authentication server. Enter the required information, and press [Login]. Select a display language if necessary. - The User Boxes that can be accessed vary depending on the logged in user or account track Logout Press [Logout] on the upper right of the screen to display a logout confirmation screen. Press [OK]. The login screen appears again. bizhub C360/C280/C

45 5.4 Using the User Box function Using the User Box function To use PageScope Web Connection using the Web Browser installed in the MFP, the following operations are available as the User Box function. - Operating documents in the User Box on the MFP being used or a different MFP connected to the network. - Using the Public, Personal, and Group User Boxes as User Box Types. - Displaying, printing, and deleting a document in the User Box Open User Box Logging in using PageScope Web Connection displays the list of User Boxes (Public, Personal, and Group User Boxes) registered in the accessed MFP. [Open User Box] Select a desired User Box name ([User Box Name]) at User Box List. Alternatively, directly enter a User Box number ([User Box Number]) and User Box password ([User Box Password]), and then press [OK]. - When you select a User Box name ([User Box Name]) with a password specified in [User Box List], a screen for entering the password appears. [Open User Box] Item [User Box Number] [User Box Password] Description Enter the User Box number to be opened. If a password is set to the target User Box, enter the password. [User Box List] Item [Search from Index] [Page (Display by 50 cases)] User Box List Description Switch the index display according to the indexes selected when creating a User Box. When this machine contains 50 or more User Boxes, specify the desired page to change the display. Displays the [User Box Number], [User Box Name], [Type] and [Time Stored]. A key icon appears beside User Boxes where a password has been specified. bizhub C360/C280/C

46 5.4 Using the User Box function 5 [File List] Select a User Box in [Open User Box]. The basic information of the User Box is displayed with a list of the documents saved in the User Box. Item [Thumbnail View] [Specify operation] [Changes the display] [Select] [Thumbnail] [Document Name] [Number of Originals] [Edit Name] Description Specify whether to view the thumbnail images of the document. Set to [OFF] for list display. Select an operation. For details, refer to page 5-7. Press this button to display the [Select] check box beside all documents with which the selected operation can be performed. Displays a check box beside all documents with which the selected operation can be performed. Displays thumbnail images of the document. Displays the name of the document. Displays the number of originals in a document. Press this button to change the document name. bizhub C360/C280/C

47 5.4 Using the User Box function Document operations A selected document can be printed or deleted. Printing a document 1 Select [Print] from [Specify operation], and then press [Changes the display]. A check box appears beside all printable documents. 2 Select the check box for the document to be printed, and then press [Print Setting]. bizhub C360/C280/C

48 5.4 Using the User Box function 5 3 Configure necessary settings, and then press [OK]. % In [Page Range], select whether to print all pages of the selected document or to print by specifying a page range. % In [Change order], you can change the print order when printing multiple documents. 4 Press [Open File]. 5 Press [Print]. % If [View] is pressed, a PDF file appears. To print the displayed PDF file, press. 6 Configure print settings, and then press [Start] or the Start key on the control panel. - If the [Function Version] of the destination MFP is not [Version 3], press [Open File] in Step 4 to display the PDF file on the panel. To print the displayed PDF file, press. To check the function version of the MFP, select [Device Information] in [Utility]. bizhub C360/C280/C

49 5.4 Using the User Box function 5 Deleting a document 1 Select [Delete] from [Specify operation], and then press [Changes the display]. A check box appears beside the documents that can be deleted. 2 Select the check box for the document to be deleted, and then press [Delete]. % Select the [Check/Uncheck (applied to all the documents )] check box to select all documents. bizhub C360/C280/C

50 5.4 Using the User Box function 5 3 Check the document name to be deleted, and then press [OK]. The document is deleted. bizhub C360/C280/C

51 6 Image Panel

52 6.1 Overview 6 6 Image Panel 6.1 Overview Image Panel is a new intuitive and easy-to-understand panel interface. - This function can be used on the MFP with i-option LK-101 v2 or i-option LK-103 v2 registered. - If [User Authentication/ Account Track] ö [Scan to Authorized Folder Settings] is set to [Limit] in [Administrator Settings], Image Panel cannot be used. Features Image Panel divides the operation workflow into three processes, "reading a document", "editing a document", and "specifying a destination", which can be operated on one screen. This allows you to easily understand the entire operation workflow and operation in progress. Image Panel focuses on operability. Therefore, the functions available in Image Panel are limited compared with the conventional panel. When the My Panel and My Address function are available, you can customize the Image Panel screen as a user-specific screen. d For details on the My Panel function, refer to page 9-2. For details on the My Address function, refer to page bizhub C360/C280/C

53 6.2 Displaying the Image Panel Displaying the Image Panel In [Application Menu], press [Image Panel] to display the Image Panel top screen. d For details on the [Application Menu], refer to page 3-3. bizhub C360/C280/C

54 6.3 Operating Image Panel Operating Image Panel Screen components The Image Panel screen consists of the following No. Name Description 1 Login Information Displays the user name and icon of the user who is currently logged in. area 2 Read Data area Scan a document, retrieve a document from a User Box or external memory, and send data from a cellular phone or PDA. 3 Desktop area Documents read in the Read Data area are displayed in a thumbnail view or list view. 4 List Display/Thumbnail View switching Switches the desktop area display between the list display and thumbnail view. 5 Message area Displays an auxiliary message such as operating instructions. 6 Status area Displays the date and current time. If an alert occurs, an alert icon appears. 7 Edit tool area Edit the page, combine and change settings of the document after it is scanned. 8 Send Tray/Edit Tool display switching 9 Document Destination area Switches the display between the send tray and edit tool display. For details on the send tray, refer to page Specify a destination of the read document from [Print] or [Destination List]. bizhub C360/C280/C

55 6.3 Operating Image Panel General operation The following describes the operation flow from document reading processing to sending processing by showing operations of Image Panel in order of "reading a document", "editing a document", and "specifying a destination". - You can specify a destination first, and then read a document. In the Read Data area, read or retrieve a document. To scan a document, place the document, and then press [Scan]. Configure the scan settings as needed, and then start to read the document. For details, refer to page 6-7. To use a document saved in a User Box, select the User Box from [Document Source List], and select the document you want to retrieve. For details, refer to page 6-8. To use a document saved in an external memory, select [External Memory] from [Document Source List], and select the document you want to retrieve. For details, refer to page 6-9. To use data saved in a cellular phone or PDA, select [Mobile] from [Document Source List]. For details, refer to page Select [Scan] Select [Document Source List]. In the Edit Tool area, edit the read document. For details, refer to page In the Document Destination area, specify a destination of the read document. To print, press [Print]. For details, refer to page To send the document, select a destination from [Destination List]. For details, refer to page To save data in an external memory, press [External Memory] in the Destination List screen. For details, refer to page Select [Print]. Select [Destination List] bizhub C360/C280/C

56 6.3 Operating Image Panel 6 If you specify an address, the send tray appears. For details, refer to page Press Start to send the document. To send data from a cellular phone or PDA, press Start to display a PIN code. Enter the PIN code in the cellular phone or PDA to send data to the MFP. Data is sent to the specified destination. For details, refer to page bizhub C360/C280/C

57 6.3 Operating Image Panel Reading a document Scan a document, retrieve a document from a User Box or external memory, and send data from a cellular phone or PDA. Scanning a document Press [Scan] to display the Scan Settings screen. Configure the scan settings as needed, and then press [Scan]. - Only one document can be scanned. Item [Original Type] [Simplex/Duplex] [Resolution] [File Type] [Density] [Color] [Document Name] [Separate Scan] Description Select the image quality from [Text], [Text/Photo], [Photo], [Dot Matrix Original] and [Copied Paper] according to the contents of the original to be scanned. Select either to scan a 1-sided original or 2-sided original. Select the scan resolution from [200 e 100dpi (Standard)], [200 e 200dpi (Fine)], [300 e 300dpi], [400 e 400dpi (Super Fine)] and [600 e 600dpi (Ultra Fine)]. Select a file type from [PDF], [Compact PDF], [TIFF], [JPEG], [XPS] and [Compact XPS]. Select whether to save the whole scanned pages as one file, or to divide a file in specified number of pages in order to save data. You cannot select [Multi Page] if [JPEG] is selected for file type. To send divided files by attaching them to an , specify [ Attachment Method]. Select [All Files Sent as one (1) ] to attach all divided files to one message. Select [One (1) File per ] to send messages for each divided file. Selecting [Compact PDF] for file type allows you to specify [Outline PDF]. If either i-option LK-102 or i-option LK-103 v2 is registered in the MFP, selecting [PDF]or [Compact PDF] for file type allows you to specify [Encryption] and [PDF Document Properties]. For details on the function, refer to page 7-2. If i-option LK-105 is registered in the MFP, selecting [PDF]or [Compact PDF] for the file type allows you to specify [Searchable PDF]. For details on the function, refer to page 8-2. Adjust the density for scanning. Select the scan color from [Auto Color], [Full Color], [Gray Scale] and [Black]. Specify the document name. Press this button to divide scanning of the document into several times. It is useful for the following cases. When the number of pages of a document is too many, and it cannot be loaded into the ADF When placing the originals on the original glass When 1-sided originals and 2-sided originals are mixed bizhub C360/C280/C

58 6.3 Operating Image Panel 6 Retrieving from User Box Select a User Box from [Document Source List] to display the Use Document screen. Select a document to be retrieved, and then press [OK]. - If a password has been specified for the selected User Box, the password input screen appears. Enter the password. - Only one User Box can be selected. - Up to 10 documents can be retrieved from a User Box at one time. - If a User Box is specified as a destination, you cannot retrieve more than one document. - If [Print]is specified as a destination, you cannot retrieve more than one document. - You cannot specify the User Box, from which you retrieved the document, as the destination. Item [Edit Name] [Document Details] Description Press this button to change the name of the selected document. Press this button to check the detailed information or preview image of the selected document. bizhub C360/C280/C

59 6.3 Operating Image Panel 6 Retrieving a document from an external memory Select [External Memory] from [Document Source List] to display the list of documents saved in the external memory. Select a document to be retrieved, and then press [OK]. - To retrieve a document from an external memory, you must configure the following settings in the MFP depending on the purpose of the document to be used. To print a retrieved document, in [Administrator Settings]ö[System Settings]ö[User Box Settings]ö[External Memory Function Settings], set [Print Document] to [ON]. To additionally perform user authentication, in [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Print] to [Allow] for each user. To save a retrieved document in a User Box, in [Administrator Settings]ö[System Settings]ö[User Box Settings]ö[External Memory Function Settings], set [External Memory Document Scan] to [ON]. To additionally perform user authentication, in [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[External Memory Document Scan] to [Allow] for each user. - The available file formats are PDF, TIFF, JPEG, and XPS. - Up to 200 documents can be retrieved from an external memory. - To open a folder, select the one you want to open, and then press [Open]. - You cannot specify a JPEG document together with any other format at the same time. - If a document has been retrieved from an external memory, you cannot read the document using [Scan] or [Document Source List]. - You can only specify either [Print] or a User Box as a destination of a document retrieved from an external memory. Also, you can specify only one User Box as a destination. To save a document in a User Box, you must create a User Box and register the User Box in the address book in advance. - If other than User Box is specified as a destination, you cannot select [External Memory]. bizhub C360/C280/C

60 6.3 Operating Image Panel 6 Using data saved in a cellular phone or PDA Select [Mobile] from [Document Source List]. Selecting [Mobile/PDA] and pressing [OK] displays the cellular phone icon on the desktop area. <Specification of communication with a cellular phone or PDA> Item Communication protocol Supporting profile Supporting file type Supporting XHTML file Specifications Bluetooth Ver EDR OPP/BPP/SPP PDF/CPDF/XPS/CXPS/TIFF/JPEG/XHTML/RepliGo Character code: UTF-8, Shift-JIS, ISO-8859 Extension of link file: JPEG, JPG, PNG - To connect the MFP to a cellular phone or PDA, install the optional Local Interface Kit EK-605 in the MFP. Additionally, configure the following settings in the MFP. Set [Administrator Settings]ö[Network Settings]ö[Bluetooth Setting] to [Enable]. Also, set [Administrator Settings]ö[System Connection]ö[Cellular Phone/PDA Setting] to [Allow]. To perform user authentication, in [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Cellular Phone/PDA] to [Allow] for each user. - If [Mobile/PDA] is selected, you cannot read a document using [Scan] or [Document Source List]. - You can only specify either [Print] or a User Box as a destination for sending data from a cellular phone or PDA. Also, you can specify only one User Box as a destination. To save a document in a User Box, you must create a User Box and register the User Box in the address book in advance. - If other than [Print] or a User Box is specified as a destination, you cannot select [Mobile]. - This machine supports RepliGo version To print an XHTML file, since a linked file is retrieved using the WebDAV client function, you must configure the following settings in the MFP in advance. Set [Administrator Settings]ö[Network Settings]ö[WebDAV Settings]ö[WebDAV Client Settings] to [ON]. To connect via a proxy, register a proxy server in [Proxy Server Address] of [WebDAV Client Settings]. Additionally, set [User Settings]ö[Cellular Phone/PDA Setting]ö[Proxy Server Use] to [Yes]. In [User Settings]ö[Cellular Phone/PDA Setting]ö[Link File Error Notification], specify the operation for the machine to execute when it is unable to retrieve the linked file. d For details on how to send data from a cellular phone or PDA, refer to page The function to connect the MFP to a cellular phone or PDA is available even if the license kit is not registered. For details, refer to the [User's Guide Box Operations] and [User's Guide Print Operations]. bizhub C360/C280/C

61 6.3 Operating Image Panel Editing the document Edit the read document. - When using data saved in a cellular phone or PDA, you cannot check the preview image or edit the data. [Preview] Press this button to check the detailed information or preview image of the selected document. - For a document retrieved from an external memory, the [Preview] function is not available. - For a combined document, the preview function is available only for the first document. [Document/Page] - [Edit Document] Edit the pages of a selected document. You can rotate the page that has been scanned in the wrong direction, or delete an unnecessary page. For a document consisting of multiple pages, you can move pages to change the page order. Also, you can preview the pages to check the page content. - If you have selected multiple documents, the edit page function is not available. - If you have selected a combined document, the edit page function is not available. Item [Odd Page] [Even Page] [Preview /Set Range] [Delete Page] Description Press this button to select the odd page. Press this button to select the even page. Press this button to preview the page. Press this button to delete the selected page. bizhub C360/C280/C

62 6.3 Operating Image Panel 6 Item [Rotate Page] [Move Page] Description Press this button to rotate the selected page. The allowable rotation angles are left 90 degrees, right 90 degrees, and 180 degrees. Press this button to change the order by moving the selected page. While checking the thumbnail images, you can select the moving position. [Document/Page] - [Combine Documents] Combine selected multiple documents. You can use [Move] to change the combination order. - You can only select either [Print] or [Destination List] as a destination of a combined document. - Up to 10 documents can be combined at one time. - You cannot combine a scanned document with a document retrieved from a User Box. bizhub C360/C280/C

63 6.3 Operating Image Panel 6 [Document/Page] - [Document Settings] Configure settings for sending the selected document. You can change the resolution of the document, file type, and color setting. - If you have selected multiple documents, the document setting function is not available. - If you have selected a document retrieved from an external memory, the document setting function is not available. Item [Resolution] [File Type] [Color] Description Select the scan resolution from [Settings when saving], [200 e 100dpi (Standard)], [200 e 200dpi (Fine)], [300 e 300dpi], [400 e 400dpi (Super Fine)] and [600 e 600dpi (Ultra Fine)]. Select the file format for sending data from [PDF], [Compact PDF], [TIFF], [JPEG], [XPS] and [Compact XPS]. Select whether to save the whole scanned pages as one file, or to divide a file in specified number of pages in order to save data. You cannot select [Multi Page] if [JPEG] is selected for file type. To send divided files by attaching them to an , specify [ Attachment Method]. Select [All Files Sent as one (1) ] to attach all divided files to one message. Select [One (1) File per ] to send messages for each divided file. Selecting [Compact PDF] for file type allows you to specify [Outline PDF]. If either i-option LK-102 or i-option LK-103 v2 is registered in the MFP, selecting [PDF]or [Compact PDF] for file type allows you to specify [Encryption] and [PDF Document Properties]. For details on the function, refer to page 7-2. If i-option LK-105 is registered in the MFP, selecting [PDF]or [Compact PDF] for the file type allows you to specify [Searchable PDF]. For details on the function, refer to page 8-2. Select the scan color for sending data from [Use Existing Color Setting], [Full Color], [Gray Scale] and [Black]. [Return to Scan Dest.] Press [Return to Scan Dest.] to restore the selected document to the source location. - The scanned document is deleted from the MFP. - The document retrieved from a User Box is restored to the source User Box. bizhub C360/C280/C

64 6.3 Operating Image Panel Specifying a destination Specify a destination of the read document. Printing Press [Print] to print data directly from the MFP. Configure the print settings, and then press [OK]. - If you have scanned multiple documents, the print setting function will not be available. - When you print a combined document, [Combine] and [Zoom] are not available. - When printing a document with an embedded password using the password copy function, you cannot specify [Combine] or [Zoom]. For details on the password copy function, refer to the [User's Guide Copy Operations]. - When you print a document that has been retrieved from an external memory, [Use Existing Color Setting], [Combine] and [Zoom] are not available. - When you print a document of JPEG, XPS, or Compact XPS format that has been retrieved from an external memory, [2-Sided] is not available. Also, Staple and Punch are not available for the [Finishing] setting. - When printing data saved in a cellular phone or PDA, you can only check the print settings. To change print settings, select [User Settings]ö[Cellular Phone/PDA Setting]ö[Print]. Item [Copies:] [Print] [Color] [Finishing] [Combine] [Zoom] [Continuous Print] Description Specify the number of copies to be printed using the Keypad. Select whether to print in 2-sided mode. Specify whether to print originals in color or black-and-white. Press this button to configure settings for collating, grouping, stapling, or hole punching. Press this button to specify whether to combine pages. Multiple pages of a document can be combined and printed on a single page. Press this button to specify a zoom ratio for the document. This function is available when printing combined documents in the 2-sided print mode. Multiple document are printed continuously when they are combined. When printing in 2-Sided mode, and the document ends on the front side of a sheet of paper, select whether to start printing of the next document on the back side of the sheet or on the front side of a new sheet. - The setting value of [Finishing] varies depending on which option is installed. The Staple settings are available only if the optional finisher is installed. The Punch settings are available only if the punch kit is installed on the optional finisher. - [Continuous Print] is displayed when multiple documents are combined using the editing tool, and then [Print] is selected as a destination. bizhub C360/C280/C

65 6.3 Operating Image Panel 6 Specifying destinations From [Destination List], select an address to which you want to send a document. Press the [Search] tab to reference one-touch destinations registered in the main unit. Press the [Group] tab to reference the group list registered in the main unit. - If you have read multiple documents, the User Box function will not be available. - If My address function is available, pressing [My Address] allows you to view My Address Book. For details on the My Address function, refer to page If you have specified an address, you can check the send tray by pressing [Verify Address Tray/ Remote Address Setting]. - addresses for which a certificate is registered are displayed with a key icon. - You can only specify User Boxes as an address book destination of a document retrieved from an external memory or a document saved in a cellular phone or PDA. Saving a document in an external memory Select [External Memory] from [Destination List], and press [OK]. - To save data in an external memory, in [Administrator Settings]ö[System Settings]ö[User Box Settings]ö[External Memory Function Settings], set [Save Document] to [ON]. To additionally perform user authentication, in [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Save to External Memory] to [Allow] for each user. - If [Print] or a destination is specified as a destination, you cannot select [External Memory]. bizhub C360/C280/C

66 6.3 Operating Image Panel Checking the send tray Send Tray If you specify an address, the send tray appears. The send tray displays the icon for the destination you have specified. 1 2 No. Name Description 1 Dest. Settings icon Press the Dest. Settings icon to display the Check Send To screen, where you can check the list of specified destinations. 2 Destination icon Displays the icons for destinations. Press the icon for the desired destination to display the Check Send To screen, where you can check the detail information of the destination. [Check TX Tray] Press the icon of the send tray to display the Check Send To screen, where you can check the list of specified destinations. If an address is specified as a destination, you can specify settings for the encryption and digital signature attachment. Item [Remote Address Settings] [Detail] Description Press this button to configure settings for encryption based on S/MIME and digital signature attachment. This setting is available when [ON] is selected for [S/MIME Communication Settings] of [Administrator Settings], and is selected. Press this button to check the detailed information of the address. bizhub C360/C280/C

67 6.3 Operating Image Panel 6 Item [Delete] Description Press this button to delete the selected address. - To encrypt an message and attach a digital signature using S/MIME, set [Administrator Settings]ö[Network Settings]ö[ Settings]ö[S/MIME Communication Settings] to [ON]. - To encrypt an , a certificate must be registered in the address. - To attach a digital signature to an message, the device certificate must be registered in the MFP. Also, set [Administrator Settings]ö[Network Settings]ö[ Settings]ö[S/MIME Communication Settings]ö[Digital Signature] to [Always add signature] or [Select when sending]. For details, refer to the [User's Guide Network Administrator] Sending data from a cellular phone or PDA Selecting a destination and pressing Start displays the PIN code on the Control Panel. Specify the data you want to use and the MFP to send data in the cellular phone or PDA. Then enter the PIN code to send data to the MFP. - You can only specify either [Print] or a User Box as a destination for sending data from a cellular phone or PDA. Also, you can specify only one User Box as a destination. To save a document in a User Box, you must create a User Box and register the User Box in the address book in advance. For details on how to create a User Box, refer to the [User's Guide Box Operations]. For details on how to register a destination to the address book, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. - For the operation of a cellular phone or PDA, refer to the operation manual of the cellular phone or PDA. - The communication speed may be reduced or communication may be interrupted by obstacles, signal quality, magnetic field or static electricity. - Documents and image data may not be sent correctly depending on the security setting of the cellular phone or PDA. bizhub C360/C280/C

68 6.4 Registering a photo in the address book Registering a photo in the address book From the Web browser on your computer, you can use PageScope Web Connection to add photo data to registered one-touch destinations. The registered photo data is applied to the [Destination List] of Image Panel. d For details on PageScope Web Connection, refer to the [User's Guide Network Administrator] Specifications of photo data The specifications for registerable photo data are as shown below. Item File Type Image size Data size Specifications BMP format, 24-bit color, uncompressed 48 e 48 pixels 6,966 bytes - Photo data is not enlarged or reduced during photo data registration process. bizhub C360/C280/C

69 6.4 Registering a photo in the address book Registering photo data Register photo data by operating PageScope Web Connection from the Web browser on your computer. - To add photo data to the address book, you must register one-touch destinations in advance. - When the My Address function is available, you can add photo data to one-touch destinations in My Address Book. - Photo data can be registered in My Address Book only when you log in as a registered user. 1 Log in to the user mode or administrator mode. 2 Select [Store Address]. 3 Select [Photo/Icon]. 4 Select the one-touch destination to which you want to add photo data, and then click [Edit]. % When the photo data is registered, [Photo/Icon] is displayed in [Photo]. bizhub C360/C280/C

70 6.4 Registering a photo in the address book 6 5 Select [Register Photo]. 6 Click [Browse], and then specify the folder where the photo data you want to add is saved. 7 Press [OK]. The photo data is added to the one-touch destination. bizhub C360/C280/C

71 6.5 Customizing Image Panel Customizing Image Panel When the My Panel and My Address function are available, you can customize the Image Panel screen as a user-specific screen. To customize the Image Panel screen, the following conditions are required. - The My Panel and My Address functions are available on the MFP. - Perform user authentication, and then log in as a registered user. d For details on the My Panel function, refer to page 9-2. For details on the My Address function, refer to page Customizing the Read Data area Shortcut icons for frequently used User Boxes can be registered in the Read Data area. 1 In [Data Source], press [Document Source List]. 2 Press [Customize Basic Screen]. 3 Select the User Box you want to register in the basic screen, and select the location in the Read Data area. % If you have selected a location that is already registered in the basic screen, the data is overwritten. % You cannot register a User Box that is already registered in the basic screen to another location in the basic screen. bizhub C360/C280/C

72 6.5 Customizing Image Panel 6 4 Press [OK]. A shortcut icon is registered Customizing the Document Destination area Shortcut icons for frequently used destinations can be registered in the Document Destination area. 1 Press [Destination List] in the [Data Destination] area. 2 Press [Customize Basic Screen]. 3 Select the destination you want to register in the basic screen, and select the location in the Document Destination area. % If you have selected a location that is already registered in the basic screen, the data is overwritten. % You cannot register a destination that is already registered in the basic screen to another location in the basic screen. bizhub C360/C280/C

73 6.5 Customizing Image Panel 6 4 Press [OK]. A shortcut icon is registered Deleting a registered shortcut icon 1 Press [Customize Basic Screen]. 2 Select an icon you want to delete. 3 Press [Delete]. 4 Press [OK]. The shortcut icon is deleted. bizhub C360/C280/C