IC Card & SIM card Connector. Selection Guide
|
|
|
- Dora Walker
- 9 years ago
- Views:
Transcription
1 IC Card & SIM card Connector Selection Guide For more information Solution Way Co.,Ltd Tel : Fax:
2 H&V COMBO CARD CONNECTOR Series (SIM+MICRO SD) MSA SIM: 8 pin / Micro SD: 8 pin 3. Dim.: 16.10L x 16.50W x 3.00H mm 4. Micro SD: Blade Switch (Normally Open) 5. Micro SD: Push-Push Type MSA SIM: 8 pin / Micro SD: 8 pin 3. Dim.: 27.36L x 18.55W x 2.95H mm 4. Metal Cover: Hinge Type
3 H&V SMART CARD CONNECTOR Series ICC-301 ICC-312 ICC Dim.: 28.77L x 18.97W x H mm Base Stopper Total H ICC SMT type (with post) 4. Dim.: 28.70L x 17.50W x H mm Base Stopper Total H / / Dim.: 21.25L x 11.18W x 2.50H mm ICC Dim.: 22.80L x 17.65W x H mm Base Stopper Total H ICC Dim.: 15.70L x 16.40W x 2.60H mm ICC-313 ICC SMT type (with post) 4. Dim.: 28.70L x 17.50W x H mm Base Stopper Total H Normal or Offset Type (Offset 0.80 mm) 4. Blade Switch: Normally Open 5. Dim.: 24.00L x 18.75W x 2.75H mm 4. Dim.:15.85L x 16.50W x 3.00H mm ICC Dim.: 16.00L x 15.55W x 3.80H mm
4 H&V SMART CARD CONNECTOR Series ICC-400 ICC-402 ICC Dim.: 23.60L x 10.15W x 1.30H mm 3. Dim.: 11.80L x 8.70W x 2.60H mm 3. Dim.: 11.80L x 10.62W x 2.60H mm ICC-405 ICC-408 ICC Dim.: 11.80L x 8.70W x 1.80/2.00H mm 3. Dim.: 11.70L x 8.40W x 3.00/4.50H mm 3. Dim.: 11.70L x 11.00W x 3.00/4.50H mm ICC-409 ICC-410 ICC Dim.: 11.10L x 7.60W x 1.50/1.80/2.00/2.40/2.60H mm 3. Dim.: 11.80L x 7.50W x 5.25H mm 3. Dim.: 15.70L x 16.40W x 2.60H mm ICC-412 ICC-413 ICC Dim.: 22.65L x 11.60W x 1.80H mm 3. Dim.: 15.85L x 16.50W x 3.00H mm 3. Dim.: 14.20L x 16.30W x 1.90H mm ICC-416 ICC-417 ICC Dim.: 17.55L x 16.50W x 2.00H mm 3. Dim.: 10.70L x 15.60W x 3.00H mm 3. Dim.: 15.70L x 16.40W x 2.60H mm
5 ICC-422 Type1 ICC-422 Type2 ICC Dim.: 13.90L x 16.30W x 2.20/2.40/2.60H mm 3. Dim.: 13.90L x 16.30W x 2.20H mm 3. Dim.: 13.90L x 16.30W x 1.80H mm ICC-425 ICC-426 ICC Dim.: 14.90L x 16.30W x 1.90H mm ICC Dim.: 18.70L x 16.50W x 2.60H mm 4. Metal Cover: Hinge Type ICC Dim.: 15.70L x 16.40W x 2.80H mm ICC Dim.: 12.10L x 16.40W x 2.80H mm 3. Dim.: 14.20L x 16.30W x 1.90H mm 3. Dim.: 15.30L x 16.50W x 1.65H mm ICC-431 ICC-432 ICC Dim.: 13.90L x 16.30W x 2.40/2.60H mm 3. Dim.:13.90L x 16.30W x 2.20H mm 3. Dim.:13.90L x 16.30W x 2.80H mm ICC-433 ICC-435 ICC Dim.: 15.30L x 16.50W x 1.65H mm 3. Dim.: 19.15L x 16.50W x 1.60H mm 3. Dim.: 18.70L x 16.60W x 2.60H mm 4. Metal Cover: Hinge Type
6 ICC-437 ICC-438 ICC Dim.: 15.70L x 16.40W x 4.50H mm 4. Standoff= 1.90 mm 3. Dim.: 10.30L x 15.65W x 2.40H mm 3. Dim.: 10.30L x 15.65W x 2.90H mm ICC-439 ICC-450 ICC Dim.: 15.70L x 16.40W x 4.80H mm 4. Standoff= 2.20 mm 3. Dim.: 15.70L x 16.40W x 4.50H mm 4. Standoff= 1.90 mm 3. Dim.: 15.10L x 16.70W x 4.75H mm 4. Standoff= 2.30 mm ICC-452 ICC-453 ICC Dim.: 13.95L x 16.30W x 2.10H mm 3. Dim.: 14.35L x 17.30W x 2.45H mm (Dual SIM Type) 3. Dim.: 17.50L x 17.50W x 3.05H mm ICC-458 ICC-459 ICC Dim.: 13.46L x 16.30W x 1.90H mm 3. Dim.: 10.00L x 7.60W x 1.20/1.40H mm 3. Dim.: 9.40L x 16.40W x 2.90H mm ICC-469 ICC-478 ICC-480 ICC Dim.: 11.10L x 7.60W x 1.50H mm 3. Dim.: 13.00L x 16.30W x 1.80H mm 3. Dim.: 13.95L x 8.50W x 0.50/0.70/0.90H mm 3. Dim.: 13.95L x 11.00W x 0.50/0.70/0.90H mm
7 H&V SIM CARD ACCEPTOR Series ICA-503 ICA-510 ICA Dim.: 25.50L x 17.20W x 2.50H mm ICA Dim.: 25.50L x 19.70W x 2.50H mm 4. Push Type: with a push bar ICA Dim.: 29.85L x 17.30W x 1.80H mm 4. Plastic Cover: Hinge Type ICA Dim.: 27.55L x 18.70W x 1.90H mm 4. Metal Cover: Push Push Type ICA Dim.: 25.50L x 17.70W x 1.95H mm 4. Metal Cover: Hinge Type 3. Dim.: 29.65L x 17.20W x 3.00H mm 4. Plastic Cover: Hinge Type ICA Dim.: 25.85L x 18.10W x 1.70H mm 4. Metal Cover: Hinge Type ICA Dim.: 27.55L x 18.70W x 1.90H mm 4. Metal Cover: Push Push Type ICA Dim.: 29.65L x 17.20W x 2.20H mm 4. Plastic Cover: Hinge Type 3. Dim.: 29.95L x 16.20W x 2.90H mm 4. Metal Cover: Hinge Type ICA Dim.: 29.65L x 17.20W x 3.00H mm 5. Plastic Cover: Hinge Type ICA Dim.: 29.65L x 17.20W x 2.00H mm 5. Plastic Cover: Hinge Type ICA Dim.: 27.55L x 18.70W x 1.90H mm 5. Metal Cover: Push Push Type
8 H&V SMART CARD ACCEPTOR Series A (Friction Technology) EMV Compliant ICA-602 ICA DIP or SMT Type (with post) 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm 2. DIP or SMT Type (with post) 4. Dim.: 55.50L x 40.00W x 5.80H mm ICA-605 ICA Dim.: 62.60L x 30.00W x 6.80H mm 4. Dim.: 56.20L x 40.00W x 6.80H mm ICA-607 ICA Dim.: 56.00L x 31.10W x 3.65H mm 4. Dim.: 56.00L x 31.10W x 3.65H mm ICA-610 ICA SMT Type (with post*2 or post*4) 4. Dim.: 55.60L x 36.20W x 5.90H mm 5. Standoff=1.00 mm 3. Sealed Switch: Normally Open 4. Dim.: 56.10L x 40.00W x 6.20H mm 5. PCI Compliant
9 H&V SMART CARD ACCEPTOR Series B (Friction Technology) ICA-603 ICA-613 ICA EMV & NDS Compliant or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm ICA-609 or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H ICA-619 or Close 4. Dim.: 62.00L x 40.00W x 13.50H mm 5. Standoff=7.35 mm ICA-629 or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm ICA-615 or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H ICA-653 Type1 (both side) 4. Dim.: 62.00L x 40.50W x 6.25H mm ICA-659 or Close 4. Dim.: 62.00L x 40.00W x 9.15H mm 5. Standoff=3.00 mm ICA-618 or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm ICA-653 Type2 (both side) 4. Dim.: 62.00L x 40.50W x H mm Base Standoff Total H ICA-620 or Close 4. Dim.: 64.00L x 48.00W x 7.50H mm ICA-611 Base Standoff Total H , Reverse Type 4. Dim.: 61.10L x 40.00W x H mm 5. PCI Compliant or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H ICA Dim.: 62.00L x 40.00W x H mm Base Standoff Total H With Heat-dissipation Function pin 2. Double row data contacts 3. DIP Type 4. Blade Switch: Normally Close (both side) 5. Dim.: 62.00L x 48.00W x 8.15H mm
10 H&V SMART CARD ACCEPTOR Series C (Friction Technology) ICA-638 Type1 ICA-638 Type2 (with PCB) 4. Dim.: 68.00L x 62.00W x 20.25H mm 5. Standoff=13.20 mm ICA-639 Type1 (with PCB) 4. Dim.: 63.00L x 40.00W x H mm Base Standoff Total H ICA-632 (with PCB) 4. Dim.: 84.15L x 71.60W x 27.15H mm 5. Standoff=20.00 mm ICA-639 Type2 (with PCB) 4. Dim.: 71.00L x 40.00W x 23.85H mm 5. Standoff=17.60 mm ICA Dim.: 82.00L x 62.00W x 27.25H mm 5. Standoff=20.00 mm ICA-663 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x 17.75H mm ICA-673 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x 17.75H mm ICA-679 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H ICA-699 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H (with PCB) 4. Dim.: 63.00L x 40.00W x H mm Base Standoff Total H
11 H&V SMART CARD ACCEPTOR Series (Landing Technology) EMV Compliant ICA-700 ICA , 16 pin 2. SMT or DIP Type 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 200,000 cycles min. 2. SMT or DIP Type 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 200,000 cycles min. ICA-705 ICA SMT or DIP Type 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 500,000 cycles min. 2. SMT or DIP Type 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 500,000 cycles min. ICA-706 ICA Sealed Switch: Normally Open 4. Dim.: 56.10L x 40.00W x 6.30H mm 5. Durability: 500,000 cycles min. 6. PCI Compliant 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 6.30H mm 5. Durability: 500,000 cycles min. 6. PCI Compliant
12 H&V SMART CARD ACCEPTOR Series (with FPC) ICA-803 ICA Blade Switch: Normally Open or Close 3. Friction Technology 4. Dim.: 62.00L x 40.00W x 6.25H mm 5. FPC pitch 1.0 or 1.25 optional, L=140 mm 2. Blade Switch: Normally Open or Close 3. Friction Technology 4. Dim.: 62.00L x 40.00W x 6.25H mm 5. FPC pitch 1.0 or 1.25 optional, L=140 mm ICA-812 ICA pin 2. Blade Switch: Normally Close 3. Friction Technology 4. Dim.: 63.50L x 60.20W x 6.25H mm 5. FPC pitch 1.25, L=115 mm 2. Blade Switch: Normally Open 3. Friction Technology 4. Dim.: 62.00L x 40.00W x 6.25H mm 5. FPC pitch 1.0
13 H&V MEMORY CARD CONNECTOR ---- MCA Series MCA-T01 MCA-T MICRO SD CARD CONNECTOR MICRO SD CARD CONNECTOR 3. Metal Cover: Hinge Type 4. Dim.: 13.60L x 13.30W x 1.85H mm 3. Metal Cover: Hinge Type 4. Dim.: 13.60L x 13.30W x 1.85H mm MCA-T MICRO SD CARD CONNECTOR MCA-T MICRO SD CARD CONNECTOR 3. Push Push Type 4. Dim.: 14.00L x 15.20W x 1.88H mm MCA-S MINI SD CARD CONNECTOR 3. Push Push Type 4. Blade Switch: Normally Open 5. Dim.: 13.80L x 16.00W x 1.80H mm MCA-P PCMCIA CONNECTOR pin 3. Dim.: 21.90L x 13.15W x 2.20/2.40H mm pin 2. SMT Type (offset 0.30mm) 3. Grounding Lug Optional 4. Dim.: 46.50L x 6.00W x 3.30H mm
14 H&V FPC/FFC CONNECTOR ---- FCC Series FCC-A ~40 pin 3. Dim.: (Pin*1)+3 L x 3.00W x 5.20H mm 4. FPC/FFC Thickness: 0.30±0.05 mm 5. Operation: Vertical Type 6. Durability: 20 cycles min. FCC-A ~30 pin 2. SMT Type (with ground pin) 3. Dim.: (Pin*1)+3.6 L x 4.75W x 3.00H mm 4. FPC/FFC Thickness: 0.30±0.05 mm 5. Operation: Horizontal Type 6. Durability: 20 cycles min.
AVX Connector Short Form
AVX Connector Short Form Connector Short Form www.avx.com Version 8.2 AVX Interconnect Over 50 years of History as a World Class supplier of high quality connectors and interconnect systems, focusing in
Wireless Applications. Host Interfaces. te.com/products/ngff. TE Connectivity. M.2 (NGFF) Connector. Ultrabook/ Notebook. Smart TV. Server.
M2 NGFF Applications ULTRABOOK TABLET SSD SMART TV The list goes on and on... Miniature in size. Big in possibilities. 0.5MM PITCH WITH 67 POSITIONS & AVAILABLE IN VARIOUS HEIGHTS SAVES MORE THAN 20% PCB
PCI EXPRESS CARD EDGE G630E Series
GENERAL INTRODUCTION The PCI Express is a new serial I/O technology that is compatible with the current PCI software environment. It provides low-cost, scalable performance for the next generation of computing
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
OMRON Connectors: A Perfect Match for Your Requirements
OMRON : A Perfect Match for Your Requirements Boards to FPC/FFC Connections FPC/FFC Features of Rotary Backlock Mechanism Rotary latch is independent of the FPC socket. 1 The Rotary latch will not release
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
TEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
D2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
PHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
Creating Smart Models From Scan Data
Rapidform Tech Tip Creating Smart Models From Scan Data Related Product Version Rapidform XOR3 Goal To create a smart model from scan data. A smart model is a parametric model that uses parameters intelligently
HARTING. Electronic Connectors
HARTING Electronic Connectors HARTING Electronic Connectors Global Innovative Technology The HARTING Technology Group has established a reputation for excellence and innovation with decades of experience
Connectors. product overview. Edition 3
Connectors product overview Edition 3 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
ENGiNEEREd TO connect EUROPEAN PROdUcT GUidE connector SOLUTiONS i TEST SOLUTiONS
engineered to connect EUROPEAN ProducT Guide Connector SOLUTIONS I TEST solutions About YAMAICHI ELECTRONICS Worldwide Test Solutions Portfolio: Test and Burn-in sockets, modular test contactors, module
ZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
Contents. Document information
User Manual Contents Document information... 2 Introduction... 3 Warnings... 3 Manufacturer... 3 Description... Installation... Configuration... Troubleshooting...11 Technical data...12 Device Scope: PCB
A KYOCERA GROUP COMPANY. ELCO Memory Card Connectors
A KYOCERA GROUP COMPANY ELCO Memory Card Connectors Memory Card Connectors Contents Introduction.................................... 2 PCMCIA PC MEMORY CARD CONNECTORS Features/Benefits Series 5025, 5027,
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
Technical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 [email protected]
USB 3.1 Type-C and USB PD connectors
USB 3.1 Type-C and USB PD connectors Presentation Introduction Purpose USB Type-C connectors Supplement to the USB 3.1 and Power Delivery specification Define USB 3.1Type-C receptacle, plug and cable assembly
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Connectors for PCMCIA ExpressCard Technology
DESCRIPTION PCMCIA ExpressCard technology is the next generation for the PC Card standard. The 26 pin host and module connectors offer a smaller form factor than existing PC Card technology. The same connectors
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
PANEL CUT-OUT DIMENSIONS
POWER, Mains, IEC A comprehensive range of 3 pin IEC connectors with extensive international approval status designed for 'cold condition' applications (65 C). Rated 10A, 2Vac and to IEC320, EN60320 and
MICRO SWITCH EJF SERIES
MICRO SWITCH EJF SERIES FEATURES 1-piece spring mechanism design offering durable acute operation and nice touch feeling Heavy/Light operation force specifications High flux-tight structure High solder
Cellebrite Forensic Memory Card Reader
Cellebrite Forensic Memory Card Reader User Guide January 2012 2012 Cellebrite Mobile Synchronization LTD, All rights Reserved 1 LEGAL NOTICES This manual is delivered subject to the following conditions
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
Multilevel Socket Technologies
Multilevel Socket Technologies High Performance IC Sockets And Test Adapters Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs & Turn-Key Solutions
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
ACR880 GPRS Portable Smart Card Terminal
ACR880 GPRS Portable Smart Card Terminal Technical Specifications Subject to change without prior notice Table of Contents 1.0. Introduction... 3 2.0. Features... 4 3.0. Supported Card Types... 5 3.1.
MagIC 6100. Installation Manual. Point of Sales Terminals TD06014B
MagIC 6100 Installation Manual Point of Sales Terminals TD06014B Contents Description 3 Introduction 3 Presentation of the MagIC 6100 terminal 3 Technical Data 4 Installation 5 Unpacking 5 Safety recommendations
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
Winbond W2E512/W27E257 EEPROM
Construction Analysis Winbond W2E512/W27E257 EEPROM Report Number: SCA 9703-533 Global Semiconductor Industry the Serving Since 1964 15022 N. 75th Street Scottsdale, AZ 85260-2476 Phone: 602-998-9780 Fax:
Monitor and control the sensors through network. supported OPTEX FA CO., LTD. Remote controlling of fiber sensors. Reduces wires and saves space
CC-Link Communication Unit * FASTUS is a product brand of Optex FA. Monitor and control the sensors through network supported Remote controlling of fiber sensors Reduces wires and saves space OPTEX FA
553-xxxx. 3mm LED CBI Circuit Board Indicator Bi-level. 5 5 3 x x x x 0 1 0 ATTENTION
3mm LED CBI Circuit Board Indicator Bi-level 553-xxxx 9.65 [.380] 5.08 [.200] 3.68 [.145] RECOMMENDED P.C. BOARD LAYOUT.254 4.32 [.170] ID Red/Yel Cathode for Bicolor 2.6 [.102] 8.13 [.320] 4.44 [.175].508
Electronic Board Assembly
Electronic Board Assembly ERNI Systems Technology Systems Solutions - a one stop shop - www.erni.com Contents ERNI Systems Technology Soldering Technologies SMT soldering THR soldering THT soldering -
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
550-xx05-004. 5mm LED CBI. Circuit Board Indicator Square Back Housing, Quad Block. 5 5 0 - x x 0 5-0 x 4
5mm LED CBI Circuit Board Indicator Square Back Housing, Quad Block 5.9 [.235] 3.8 [.145].35 [.250].35 [.250] 25 [.985].35 [.250] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color RECOMMENDED
RealSSD Embedded USB Mass Storage Drive MTFDCAE001SAF, MTFDCAE002SAF, MTFDCAE004SAF, MTFDCAE008SAF
RealSSD Embedded USB Mass Storage Drive MTFDCAE001SAF, MTFDCAE002SAF, MTFDCAE004SAF, MTFDCAE008SAF Embedded USB Mass Storage Drive Features Features Micron NAND Flash Interface: Universal Serial Bus (USB)
Controlers. Controler
s 4 INDEX Controlers Color Wheel LED Remote page 4 Push Button RGB Controler page 5 Dimmable LED Power Supplies page 6 DMX Controler Sunlite STICK 2 page 7 DMX Controler Sunlite STICK-GA2 page 8 DMX Controler
Assembly of LPCC Packages AN-0001
Assembly of LPCC Packages AN-0001 Surface Mount Assembly and Handling of ANADIGICS LPCC Packages 1.0 Overview ANADIGICS power amplifiers are typically packaged in a Leadless Plastic Chip Carrier (LPCC)
Features. Dimensions
Description With an IDE interface and strong data retention ability, 40-Pin IDE Flash Modules are ideal for use in the harsh environments where Industrial PCs, Set-Top Boxes, etc. are used. Placement Features
Selector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
Features. Dimensions
Description With an IDE interface and strong data retention ability, 40-Pin IDE Flash Modules are ideal for use in the harsh environments where Industrial PCs, Set-Top Boxes, etc. are used. Placement Features
RClamp0522PA RClamp0524PA
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
nanoetxexpress Specification Revision 1.0 Figure 1 nanoetxexpress board nanoetxexpress 26.02.2009 Specification Rev 1.
nanoetxexpress Specification Revision 1.0 Figure 1 nanoetxexpress board Specification Rev 1.0 Page 1 of 12 Contents Figure 1 nanoetxexpress board...1 1. Introduction...3 2. Module Configuration...4 3.
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
RClamp0504P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
QM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
Pandawill Circuits. Your PCB & PCBA partner in China. PCB Fabrication Parts Sourcing PCB Assembly 1
Pandawill Circuits Your PCB & PCBA partner in China 1 PCB Fabrication Parts Sourcing PCB Assembly 1 Company Profile >10 years: Experience in the PCB manufacture and PCB assembly. >500 Employees: Skilled
NTC Thermistors, Mini Lug Sensors
NTC Thermistors, Mini Lug Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K to 47K Tolerance on R 25 -value ± 2 to ± 3 % B 25/85 -value 3740 to 3984 K Tolerance on B 25/85
User manual Compact Web PLC WP240 series IEC-line
User manual Compact Web PLC WP240 series IEC-line update: 09-01-2014 IEC-line by OVERDIGIT overdigit.com 1. General description The WP240 device is a PLC, programmable in IEC61131-3 language using CoDeSys
Features. Dimensions
Description With an IDE interface and strong data retention ability, 44-Pin IDE Flash Modules are ideal for use in the harsh environments where Industrial PCs, Set-Top Boxes, etc. are used. Placement Features
Flex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 [email protected] www.merlincircuit.co.uk Flex Circuit
PCI-SIG M.2 Specification Compatible Card Edge Connector. SM3 Series
COMPONENTS PRODUCT INFORMATION NEW PCI-SIG M.2 Specification Compatible Card Edge Connector SM3 Series CONNECTOR MB-0261-4 April 2015 RoHS Compliant The SM3 Series is a PCI-SIG PCI Express M.2 Specification
DISCONTINUED (2009) RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS compliant FEATURES Ultra high sensitivity (75 to 150 mw) High reliability-bifurcated contacts Conforms to FCC rules and regulations
Typical Performance 1. IS-95C ACPR 21.0 - - - dbm WCDMA ACLR - 19.5 18.5 - dbm
Device Features OIP3 = 45.0 dbm @ 1900 MHz Gain = 15.0 db @ 1900 MHz Output P1 db = 27.5 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package
User Manual (Rev.:1.0 )
Vantager Palm Size Card Reader/Writer User Manual (Rev.:1.0 ) INDEX Trademarks -------------------------------------------------------------------- Introductions ------------------------------------------------------------------
CAN bus ESD protection diode
Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller
FTP-627MCL353/354 #01 / #02
24V driven, FTP-607 Series 2 high speed thermal printer FTP-627MCL353/354 #01 / #02 verview The FTP-627 MCL Series are 24V driven high-speed printers with a 2-inch paper width equivalent. The FTP-627 MCL
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
Maersk Container Train Lego # 10219 Qty PartNum Color Description Picture Note
1 6187 Black Bar 1 x 4 x 2 11 3005 MaerskBlue Brick 1 x 1 3 3005 MdStone Brick 1 x 1 4 30374 Black Bar 4L Light Sabre Blade 5 3062b MdStone Brick 1 x 1 Round with Hollow Stud 2 30374 MdStone Bar 4L Light
PCIE 16X CONNECTOR BOARD ROUTING RECOMMENDATIONS TABLE OF CONTENTS
TABLE OF CONTENTS 1.0 SCOPE 2.0 PC BOARD REQUIREMENTS 2.1 MATERIAL THICKNESS 2.2 TOLERANCE 2.3 HOLE DIMENSIONS 2.4 LAYOUT 3.0 HIGHSPEED ROUTING 3.1 GENERAL ROUTING EXAMPLE 3.2 HIGH-SPEED TRANSMISSION LINE
HOTCHKISS AIR SUPPLY Heating, Ventilating & Air Movement Equipment
HOTCHKISS AIR SUPPLY Heating, Ventilating & Air Movement Equipment F l a t O v a l T u b e a n d F i t t i n g s Introduction Hotchkiss Flat Oval ductwork offers all the advantages of rectangular ducts
Mounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
PRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
P105 SINGLE STICK REVERSER PICTURE 1: PCB with headers PICTURE 3: Resistors added PICTURE 5: Add tactile switch (button) PICTURE 7: Fit lead and PIC chip. NOTE! ANTI-STATIC PRECAUTIONS REQUIRED PICTURE
Power Management: SCM
Product SCM SCM SCM consists of a fuel gauge and a protection circuit that make a battery function more powerfully. Normally it will realize the power management functions. Fuel Gauge Circuit monitors
GSM-EXT Cable Assembly Installation Guide
GSM-EXT Cable Assembly Installation Guide For Documentation and Online Support: http://www.security.honeywell.com/hsc/resources/mywebtech General Information The GSM-EXT cable assembly is used to connect
A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms
Micro oil-mist lubricator, Series NL2-LBM G 1/4
Version Micro oil-mist lubricator, an be assembled into blocks Mounting orientation vertical Working pressure min./max. 0.5 bar / 6 bar Medium ompressed air Neutral gases Medium temperature min./max. -0
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
TEECES DOME LIGHTING SYSTEMS
This lighting system was designed by John V (Teeces) to be a simple, customizable, expandable and affordable solution for dome lighting. An Arduino micro-controller is used to tell LED driver chips which
CUSTOM MICRO-D SOLUTIONS
CUSTOM MICRO-D SOLUTIONS CUSTOM DESIGN CONNECTORS Custom design connectors................................ 206 Materials & finishes.................................... 207 69 and 74 way Micro-D connectors........................
WELCOME TO VIASION. www.viasion.com
WELCOME TO VIASION www.viasion.com BRIEF INTRODUCTION Viasion Technology Co., Ltd is a professional Printed Circuit Board (PCB) manufacturer in China. With around 1500 employees totally in 2 different
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : [email protected] Solid-State Timer Low-Cost, Plug-In
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
Datenblatt - Fiche technique - Data sheet 26.50.0201
Datenblatt - Fiche technique - Data sheet 26.50.0201 ROLINE 19 -KVM-Konsole, 48 cm TFT (4:3), VGA, USB+PS/2, Tastaturlayout UK ROLINE Console 19, 1 UH, 48 cm TFT (4:3), VGA, USB et PS/2, UK ROLINE 19 LCD
USB 2.0 ALL-IN-ONE Card Reader. Universal 128552
USB 2.0 ALL-IN-ONE Card Reader Universal 128552 INDEX FEATURES... 1 SYSTEM REQUIREMENTS... 1 PACKAGE CONTENTS... 1 MEMORY CARD SLOT... 2 MEDIA ICON PROGRAM INSTALLATION... 5 PRODUCT SPECIFICATIONS... 11
MANUAL FOR RX700 LR and NR
MANUAL FOR RX700 LR and NR 2013, November 11 Revision/ updates Date, updates, and person Revision 1.2 03-12-2013, By Patrick M Affected pages, ETC ALL Content Revision/ updates... 1 Preface... 2 Technical
T O K I S T A R L I G H T I N G I N S T R U C T I O N M A N U A L LC-1CH-MULTI Dimmer Module
T O K I S T A R L I G H T I N G I N S T R U C T I O N M A N U A L Dimmer Module General The Dimmer Pack can be used with any of Tokistar s LED Lighting Systems operating from our 6, 8 or VDC LED Drivers.
REVERSIBLE ENGINE RPM INDICATOR SYSTEM MCT
RPM INDICATOR ENGINE SHAFT OR VOLANT BENEFITS METAL TARGET EASY TO INSTALL SUITABLE FOR ALL KIND OF SHIP ENGINES 3 TYPE OUTPUT FORM FOR ALL INDICATORS RPM CONVERTER 1-3 mm SUITABLE FOR REVERSIBLE AND NON
SolidWorks: Mirror, Revolve, and. Introduction to Robotics
SolidWorks: Mirror, Revolve, and Circular Pattern Introduction to Robotics Let s Review At this point we have learned the following: Extrude Boss/Base Extruded Cut Adding Relations and Dimensions Linear
uclamp0541z Ultra Small μclamp 1-Line ESD Protection
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 2 size multilayer varistors (MLVs) in portable applications
6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
Valuetronics Holdings Limited. A pictorial tour of our Daya Bay facility
Valuetronics Holdings Limited A pictorial tour of our Daya Bay facility In early 2006, we acquired the land use rights to a 110,200 sqm land parcel in the Daya Bay Technology District, Huizhou City, Guangdong
SKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKYA2112: 2 MHz to 6. GHz GaAs SPDT Switch Automotive Applications INPUT Infotainment Automated toll systems Output1 Output2 Garage door opener 82.11 b/g/n WLAN, Bluetooth systems Wireless control
Installing the JTAG connector
Installing the JTAG connector IAR KickStart Development Kit for LEGO MINDSTORMS NXT This guide describes how to solder the JTAG connector onto the LEGO MINDSTORMS NXT. This connector and cable will later
B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment
![B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment](/thumbs/30/14685882.jpg "B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment")
B MOTORPORT COMPONENT B TEMPERATURE ENOR Purpose and unction Temperature sensors used in modern engine management systems are of NTC [negative temperature co-efficient] design. imply as temperature rises
ASSEMBLY INSTRUCTIONS Residential Roof solutions
ASSEMBLY INSTRUCTIONS Residential Roof solutions CROSSRAIL System USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS
Coolflo Safe Touch Shower Mixing Valve ST20015CP
Coolflo Safe Touch Shower Mixing Valve ST20015CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
RClamp0821P. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description The RailClamp family is a series of ultra low capacitance Transient oltage Suppressors (TS) designed to protect high speed data interfaces. This series has been specifically designed
Parts List. For printer models: www.satoamerica.com. CL408e / CL412e PN: 9001077(D)
Parts List For printer models: CL408e / CL412e www.satoamerica.com PN: 9001077(D) SATO America, Inc. 10350A Nations Ford Road Charlotte, NC 28273 Main Phone: (704) 644-1650 Technical Support: (704) 644-1660