POWER TRAINING TECHNICIANS FOR WIND TURBINES INSPECTION, REPAIR AND MAINTENANCE
|
|
- Dylan Norris
- 8 years ago
- Views:
Transcription
1 TO THE WIND POWER INDUSTRY
2 The training is organized in one of the most modern training centers Only modern and innovative materials, tools and equipment are being used. All training classes and laboratories are equipped according to the latest technological requirements. The practical training is organized using real stands and conditions to simulate real situations. The training program is organized and performed by professional instructors that are widely experienced in inspection and repair of wind turbines, painting and rope access works. Safety requirements are fundamental during the whole training program, as well as working with various chemicals and performing other different types of tasks.
3 The training program covers the following topics: Inspection of wind blades Repair of wind blades Electrical works Painting works Rope access works
4 Electrical works The training program includes: The construction of wind turbines The construction of different parts of wind turbine The principle of wind turbine operation Energy transferring and saving Electrical works inside the wind turbine Health and safety requirements at work, also environment and fire safety
5 Wind turbine blade inspection The program includes: Requirements and standards for wind turbine inspection Requirements for inspection documents The types and methods of wind turbine blade inspection The practical training covers: The visual and audio visual inspection The preparation of the inspection report
6 Wind turbine blade repair The program includes: Required materials and tools for wind turbine blades repair Composite materials features and their usage for wind turbine manufacturing The types of defects and damage of wind turbine blades, the places of increased wear The practical training covers: The analysis of defects and a selection of repair technologies Surface preparation out of composite materials for repair and restoration works Reconstructive repair of wind blades
7 Wind turbines painting works The program includes: Consistency and types of paint for wind turbines painting Painting works conditions and methods Types of personal protective equipment and requirements for working with chemicals Requirements for storing chemicals and their usage The practical training covers: Surface preparation and painting of wind turbine elements
8 Rope access works The program includes: General rope access works safety requirements Requirements for maneuvering inside the wind turbine Guidelines for dealing with emergency situations The practical program covers: Anchor lines rigging Мaneuvering inside and outside the wind turbine The descent and ascent Evacuation of an injured person
9 Certification The certificate is issued to the trainee after completing the theoretical and practical examination. THE TRAINEE HAS THE RIGHT TO LIVE OUTSIDE THE TRAINING CENTER.
10 Gridin s Group Requirements of our Customers are our key priority and motivation always leading to perfection. Main office: Tomo str. 22 Klaipeda, LT Lithuania Ph.: Fax: info@gridins.com Website:
in-service inspections www.sgs.com
in-service inspections www.sgs.com Minimising down -time for wind turbines One of the major concerns in investing in wind farm projects is related to turbine availability, which represents the risk of
More informationThe Application of Rope Access Methods in the Construction, Inspection, Repair and Maintenance of Wind Turbines
The Application of Rope Access Methods in the Construction, Inspection, Repair and Maintenance of Wind Turbines Introduction IRATA International s rope access system is a safe method of working at height,
More informationSuccessful Approach to the Repair of Reinforced Concrete Support Structures in Delayed Coking Units
Successful Approach to the Repair of Reinforced Concrete Support Structures in Delayed Coking Units Thomas Kline Director- Concrete Repair Solutions STRUCTURAL TECHNOLOGIES, LLC Houston, Texas USA November
More informationOffshore Training and Development Cluster. Training centre for the wind industry
1 Offshore Training and Development Cluster Training centre for the wind industry 2 3 Training under real conditions The wind power industry is based on expertise, and this expertise demands the sound
More informationAdMaS centre Structure of the centre: Development of Advanced Building Materials Development of Advanced Structures and Technologies
AdMaS centre (Advanced Materials, Structures and Technologies) is modern science centre and complex civil engineering research institution affiliated to the Faculty of Civil Engineering, Brno University
More informationKia 7 Year Warranty. Terms and Exclusions
Kia 7 Year Warranty Terms and Exclusions At Kia, we don t just sell cars that look nice. We want our customers to enjoy them for years to come. We use the latest engineering and technical know-how to design
More informationGas Turbine Metallurgy, Coatings and Repair Technology Workshop May 2 nd, 2010
Gas Turbine Metallurgy, Coatings and Repair Technology Workshop May 2 nd, 2010 ITSC 2010 Singapore May 3-5, 2010 Fairmont Singapore Raffles City Convention Centre Course Instructors Jeff Smith Materials
More informationDocument number #12 DNS13006. Authors #20 Telephone: Date #40 AUGUST 2013
#0 INSPECTION REPORT Discipline or report series #0 Inspection VESTAS wind turbines Title #5 VESTAS WIND TURBINE #2 Report number #52 #3 Authors #20 Telephone: Date #40 AUGUST 203 Summary #60 6 UNIT VESTAS
More informationFall Hazards 1/3/2014. Introduction
Fall Hazards Introduction Fall hazards exist at most construction worksites exposing workers to dangerous work environments on a daily basis. A fall hazard is anything that may cause a person to lose his
More informationKia 7 Year Warranty. Terms and Exclusions
Kia 7 Year Warranty Terms and Exclusions At Kia, we don t just sell cars that look nice. We want our customers to enjoy them for years to come. We use the latest engineering and technical know-how to design
More informationFALL PROTECTION WORK PLAN
FALL PROTECTION WORK PLAN INSTRUCTIONS A written fall protection work plan must be implemented by each employer on a job site where a fall hazard of 10 feet or greater exists, in accordance with OSHA Standards.
More informationRESCUE PLAN FALL PROTECTION PROGRAM
RESCUE PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific rescue plans for working at heights. GLOBAL LEADER IN FALL PROTECTION RESCUE PLAN This document is
More informationHSE Requirements for Contractors
PROJECT DEFINITION AND CONTACTS Project Title: Kodak is obligated to identify any known and potential Health, Safety, and Environmental (HSE) hazards to individuals who might be affected by them. This
More informationWARRANTY CLAIM FORM. The future of TERMITE PROTECTION today
WARRANTY CLAIM FORM The future of TERMITE PROTECTION today WARRANTY PROCEDURE In the unlikely event a Termguard System causes concern, the following warranty procedures are required to be completed. To
More informationFall Protection Guidelines
OCT 2015 1 of 6 Fall Protection Guidelines 1.0 PURPOSE To establish the requirements and procedures to protect employees and other persons conducting work from hazards associated with falling from one
More informationNames and Contact Numbers of Competent Rescuers Assigned to Job (Please print)
Emergency Plan For Rescue from Heights Department of Facilities Management Occupational Health and Safety Shop Performing Work Date Work Order No. Job Location Job Description Height of work platform /
More informationAeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
More informationWork at Height / Falling Objects
Introduction This information sheet gives employers and employees practical advice on work at height and falling objects and how to eliminate or reduce the risk of harm or damage occurring. It will assist
More informationMaintenance strategies for offshore wind farms. Industry Meets science 2015
Maintenance strategies for offshore wind farms Industry Meets science 2015 Jan Erik Salomonsen, Trondheim 04.06.2015 MainTech AS wind services Advanced investment models Consultants on technology selection
More informationElevating Devices Mechanic Safety Training
Elevating Devices Mechanic Page 1 PREFACE This Elevating Devices Mechanic Curriculum Training Standard has been developed in keeping with the Common Format Guidelines prescribed by the Technical Standards
More informationInspecting fall arrest equipment made from webbing or rope
Inspecting fall arrest equipment made from webbing or rope Health and Safety Introduction Inspecting fall arrest equipment made from webbing or rope This leaflet is mainly aimed at employers who are responsible
More informationSam Docknevich, PSP, Security Service Portfolio Manager. Are You Prepared? The impending impact of Code on Servicing Security Systems
Sam Docknevich, PSP, Security Service Portfolio Manager Are You Prepared? The impending impact of Code on Servicing Security Systems usa.siemens.com/infrastructure-cities Share current and upcoming standards
More informationHeading FACT SHEET. Overview. www.safeworkaustralia.gov.au
ELECTRICAL RISKS AT THE WORKPLACE Heading FACT SHEET Overview This fact sheet provides general guidance for persons conducting a business or undertaking (PCBUs) and workers on managing electrical risks
More informationCPPSEC2021A Install security equipment and systems
CPPSEC2021A Install security equipment and systems Release: 1 CPPSEC2021A Install security equipment and systems Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency
More informationCOMPETENCY ANALYSIS PROFILE. Rodworker 452A. (All unshaded skill sets must be demonstrated/ completed) Lift equipment and materials
COMPETENCY ANALYSIS PROFILE Rodworker 452A (All unshaded skill sets must be demonstrated/ completed) PROTECT SELF AND OTHERS Wear personal protective (PPE) Lift and Apply housekeeping rules Interpret warning
More informationWire Rope Extender Lanyard
Reliance Industries, LLC User Instructions for Wire Rope Extender Lanyard Model # 714004 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650 Fax (303) 424-8670
More informationThe Orange County Farmers Museum Emergency Preparedness Plan
The Orange County Farmers Museum Emergency Preparedness Plan TABLE OF CONTENTS Section Page Introduction. 2 1. Coordination with an Emergency Response Agency. 2 2. Policies of the Board 2 3. Procedures
More informationTotal Service Solutions
Total Service Solutions Bridon On-Site Services BRIDON On-Site Services provide expert operational support to help you get the optimum performance from your ropes. Our highly competent rope technicians
More informationELECTRICAL SAFETY & ARC FLASH Handbook
Electricity Forum Handbooks Electrical Safety and Arc Flash Handbook Series ELECTRICAL SAFETY & ARC FLASH Handbook Volume 10 Reprinted by permission of the publisher, Hurst Communications, from the Electrical
More informationAmbulance Fleet Economics. Factors in Fleet Costs. Specialty Ambulance. Ambulance Types. Cost of an Ambulance. Vehicle Maintenance
Ambulance Fleet Economics Fleet Costs Accident Costs Driver Training Factors in Fleet Costs Capital Investment Maintenance & Repair Usable Life Canadian Ambu-Moose Last Superior Ambulance Built Ambulance
More informationWorking at height. What is the risk? How can you manage it?
Working at height What is the risk? How can you manage it? Shell Chemicals Europe BV June 2011 1 DISCLAIMER This document is made available for information only and on the condition that (i) it may not
More informationFALL PROTECTION PROGRAM RESCUE PLAN
GLOBAL LEADER IN FALL PROTECTION Capital Safety 95 Derby Street Silverwater, NSW 2128 Tel: 02 8753 7600 Fax: 02 8753 7603 FALL PROTECTION PROGRAM RESCUE PLAN IMPORTANT: This document is intended to provide
More informationPredictive Maintenance (with R)
Predictive Maintenance (with R) Over the course of the next 15 to 20 years the global economy will continue to progress further, heading towards a promising future full of opportunities especially within
More informationWIND TURBINE DAMAGE PREVENTION 2014
WIND TURBINE DAMAGE PREVENTION 2014 1 WIND TURBINE DAMAGE PREVENTION 2014 Contents 1 PURPOSE... 2 2 GENERAL... 2 2.1 Technical implementation and type approval... 2 2.2 Transportation... 3 2.3 Installation...
More informationA Guide to Renovation and Repair Contract Warranties
A Guide to Renovation and Repair Contract Warranties By Gerald A. Dalrymple, PE A fter being retained to review the merits of several major disputes involving the scope of warranties in renovation and
More informationHistoric Preservation Principles and Approaches
Section 4: Historic Preservation Principles & Approaches four section Historic Preservation Principles and Approaches Before any preservation project is begun, a number of fundamental decisions need to
More informationFall Protection Rescue
Page 1 of 8 I. INTRODUCTION This paper provides an overview of the present state-of-the art in fall protection rescue. Decades of experience in protecting workers exposed to fall hazards has resulted in
More informationConfined Space Entry Procedure Worksheet
1. Location Exact name and location of space to be entered. Confined Space Entry Procedure Worksheet 2. Hazard Identification & Determination - (circle all that apply) a. Tasks to be performed. Welding/Cutting
More informationOperator Training Questionnaire
Participants Name: Company Name: Score: Test Date: Location: Crane Operator's Permit Issued on Date: Instructor: 1. A Top Running Overhead Crane is any crane that runs on two parallel runway beams over
More informationCERTIFICATE OF GUARANTEE Terms and Conditions of the Parador-Guarantee
CERTIFICATE OF GUARANTEE Terms and Conditions of the Parador-Guarantee 1 Extent of guarantee The Parador guarantee does apply irrespective of any guarantee claims by the beneficiary. a) The Parador-brand
More informationIndustrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationSeatbelt Solutions www.seatbeltsolutions.com
Seatbelt Solutions www.seatbeltsolutions.com 3-Point Conversion Seatbelt Installation Guide for: 1965-1973 Mustang FRONT Coupe/Convertible/Fastback 1964-1973 Mustang Seatbelt Hardware Installation Kit
More informationDUFFERIN-PEEL CATHOLIC DISTRICT SCHOOL BOARD
DUFFERIN-PEEL CATHOLIC DISTRICT SCHOOL BOARD JOB DESCRIPTION POSITION TITLE: Air Conditioning Mechanic DEPARTMENT: Plant TITLE OF IMMEDIATE SUPERVISOR: Supervisor, Maintenance Services Position Summary
More informationSafety Manual For Overhead Crane Operators
Safety Manual For Overhead Crane Operators Contents Forward ---------------------------------------------------------------1 Qualifications---------------------------------------------------------1 Certification
More informationMINI SERvice Inclusive, MINI SERvice Inclusive plus, and mini extended warranty.
MINI SERvice, MINI SERvice plus, and mini extended warranty. CONTENTs. Introduction 01 Condition Based Service (CBS) 02 No-Charge Scheduled Maintenance 03 Flexible Options 04 SERVICE INCLUSIVE COVERAGE
More informationCavendish Aviation provides a range of services for the more discerning aircraft owner/operator.
Cavendish Aviation provides a range of services for the more discerning aircraft owner/operator. We recognise that aircraft ownership can be both demanding and expensive and have set out to improve the
More informationUNCLASSIFIED UNCLASSIFIED
DSTO Support to Accident & Incident Investigations DSTO Melbourne DSTO in Defence DSTO structure DSTO at a glance Budget 2011-12: $440m 11 research divisions 2600 staff 7 sites across Australia DSTO Support
More informationPower plant safety: a wise business move
Power plant safety: a wise business move Power plant safety: a wise business move Going to work in a controlled and safe environment is not an unreasonable expectation for any worker. In many occupations,
More informationCOLORADO MODEL. 35 x 65 SPECIFICATIONS
COLORADO MODEL 35 x 65 SPECIFICATIONS Dimensions: Roof Dimensions 35-0 x 65-0 Column Dimensions (center to center) 31-0 x 30-6 Minimum Clearance 14-0 Roof Height @ Peak ±18-8 Curved Roof ±42-6 radius Square
More informationWest Coast Forensics, Engineering and Design, LLC
West Coast Forensics, Engineering and Design, LLC Gregory A. Marbett, B.Sc., Metallurgy, CFEI Senior Metallurgist AREAS OF EXPERTISE: Failure Analysis: o industrial machines, cranes, heavy construction
More informationFacilities Maintenance Standards rev 9-1-2015
Facilities Maintenance Standards rev 9-1-2015 Purpose The purpose of these standards is to outline the minimum requirements for maintaining state owned facilities and infrastructures in a manner that will
More informationMobile Equipment Safety
Mobile Equipment Safety PLANNING THE JOB Hazard Assessment DO YOU HAVE THE RIGHT EQUIPMENT? ARE THERE HAZARDS TO BE AVOIDED? IS THE GROUND AREA STRONG ENOUGH TO SUPPORT THE EQUIPMENT? ARE THERE ANY UNUSUAL
More informationOperating instructions. 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline
Reliance Industrial Products, LLC Operating instructions for 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline Model # 6095 Reliance Industrial Products PO Box 140008 Denver, CO 80214 Ph. (800)
More informationStructural Audit of Buildings
International Journal of Civil Engineering Research. ISSN 2278-3652 Volume 5, Number 4 (2014), pp. 411-416 Research India Publications http://www.ripublication.com/ijcer.htm Structural Audit of Buildings
More informationNCCER 13614 Progress Blvd., Alachua, FL 32615 Tel: (888) 622-3720 E-mail: info@nccer.org. Task Number Item Date(s) Recorded By
NCCER 13614 Progress Blvd., Alachua, FL 32615 Tel: (888) 622-3720 E-mail: info@nccer.org PIPELINE MAINTENANCE On-the-Job Training Level One MODULE 66101-02 INTRODUCTION TO THE PIPELINE INDUSTRY This is
More informationAccidents Happen, What s Next? Understanding Damage Assessment Strategies 21 st June 2011
GIA Presentation Accidents Happen, What s Next? Understanding Damage Assessment Strategies 21 st June 2011 1 Presentation contents Introduction To Damage Assessment Common Type of Incidents Encountered
More informationREHABILITATION OF UNDERGROUND SEWER LATERAL PIPES WITH CURED-IN-PLACE-PIPE LINER SECTION 02542
1.0 INTENT REHABILITATION OF UNDERGROUND SEWER LATERAL PIPES 1.01 It is the intent of this specification to provide for the reconstruction of pipelines and conduits by the installation of a resin-impregnated
More informationAutobody/Collision and Repair Technology/Technician CIP 47.0603 Task Grid
1 Secondary Task List 100 ORIENTATION 101 Identify opportunities in the auto body field. 102 Identify basic auto body construction. 103 Identify program rules and policies. 104 Identify government agencies
More informationFraunhofer Institute for Computer Graphics research IGD. maritime graphics
Fraunhofer Institute for Computer Graphics research IGD maritime graphics Contents Maritime Graphics 2 Virtual Technologies 3 Training systems in the maritime sector 3 Virtual reality technologies in shipbuilding
More informationNational Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook
National Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook Trainee:... Training Provider:... Year:... Trainee Contact no:... Competency Based Skill Training Logbook Introduction
More informationRope Access Work. Guidelines:
Rope Access Work Background: Most current building exterior cleaning and maintenance activities involve the rope access as method to reach the work area. Proper safety is made up of proper planning, training,
More informationWind Turbine Maintenance Technician
Measuring What Matters in Job Ready Assessment Blueprint Wind Turbine Maintenance Technician Test Code: 2150 / Version: 01 Copyright 2010 General Assessment Information Wind Turbine Maintenance Technician
More informationFACILITIES MANAGEMENT DEPARTMENT QUICK REFERENCE Guide to Services
FACILITIES MANAGEMENT DEPARTMENT QUICK REFERENCE Guide to Services After-Hours Service Calls Air Conditioning and Heating Bicycle Racks Building Conditions Inspections Contract Construction (handled by
More informationThe University of Akron Main Campus Biennium 1 July 2016- June 2018. Priority Project Budget Description 1 Electrical Infrastructure Loop
The University of Akron Main Campus Biennium 1 July 2016- June 2018 1 Electrical Infrastructure Loop $2,400,000 Scope: Replace center campus deteriorated 4,160 volt cable and duct bank with 23,000 volt
More informationHazardous location. Definitions
Hazardous location Definitions hazardous location means any location, where there may be a significant risk of igniting gas, dust, mist or vapour, including the following: 1.1 For underground coal mines
More informationProgram Description. wind turbine technician academy
Program Description wind turbine technician academy In partnership with: 7107 Elm Valley Drive Kalamazoo, MI 49009 Phone: 269.353.1282 Fax: 269.353.1580 careeracademies@kvcc.edu www.kvcc.edu/training wind
More informationRoute-setting and Maintenance Fall Protection Management
Route-setting and Maintenance Fall Protection Management Note: this plan is based on Alberta workplace regulations as of October, 2010. Not all jurisdictions have similar standards. Canadian Mountain and
More informationEstimated Cost of Repair
1 Applicant: Property: Home: Business: Assessor: Applicant Number: Type of Loss: Hurricane Date Contacted: 1/18/2014 Date of Loss: 10/29/2012 Date Received: 1/14/2014 Date Inspected: 2/4/2014 Date Entered:
More informationOR Technology. Non Destructive Testing (RT) Strong Workmate for
OR Technology Strong Workmate for Non Destructive Testing (RT) Who We Are What We Do OR Technology Digital X-ray and Imaging Solutions producing digital X-ray technology and developing image management
More informationFACILITIES MANAGEMENT - MAINTENANCE, REPAIR, AND RENOVATION
Page 1 Policy: XIII.B.1 Issued: February 9, 1994 Owner: Chief Facilities Officer Latest Revision: FACILITIES MANAGEMENT - MAINTENANCE, REPAIR, AND RENOVATION 1.0 Purpose 2.0 Policy 2.1 Facilities Maintenance
More informationIntroduction to Fall Protection
Introduction to Fall Protection with John Evinger CRSP (204)228-8277 INSERT YOUR LOGO HERE Expected results of the day Today I will provide you with information to make you realize that you don t have
More information100% Safe Behavior & Conditions, Today. Service Catalog
100% Safe Behavior & Conditions, Today Service Catalog 100% Safe Behavior & Conditions, Today! Health and safety is always the number one priority for everyone in our Group. No job is so critical or urgent
More informationSAFE USE OF LIFTING EQUIPMENT
Golden Rule 6 Mechanical Lifting SAFE USE OF LIFTING EQUIPMENT Do not operate any lifting equipment unless It has been approved for use The lift has been assessed by a competent person The load has been
More informationSCHEDULE 25. Business Continuity
SCHEDULE 25 Business Continuity 1. Scope 1.1 This schedule covers TfL s requirements in respect of: any circumstance or event which renders, or which TfL considers likely to render, it necessary or desirable
More information7. PRINCIPAL STEPS 8. POTENTIAL HAZARDS 9. RECOMMENDED CONTROLS
ACTIVITY HAZARD ANALYSIS (AHA) 1. Contract Number: 2. Contractor Name: 3. Date prepared: 4. Title/Activity Performed: FIXED SCAFFOLDING 5. Location: 6. Estimated Date of Completion: 7. PRINCIPAL STEPS
More informationecognition of Prior Learning (RPL)
ecognition of Prior Learning (RPL) ASSESSMENT GUIDE FOR INSPECT AND LUBRICATE AN AUTOMOTIVE SYSTEM Assessment Guide inspect and lubricate an automotive system Page 1 of 9 National Certificate in Professional
More informationOSHA Scaffold Standard for Construction. 29 CFR 1926 Subpart L
OSHA Scaffold Standard for Construction 29 CFR 1926 Subpart L EH&S Jim Walker What is the revised OSHA scaffold standard for construction? Issued on August 30, 1996 and became effective on November 29,
More informationSection 14. Forklift Safety Contents 14.1 Operator Safety
Section 14. Forklift Safety Contents 14.1 Operator Safety... 14-1 14.2 Inspection and Maintenance... 14-2 14.3 Handling the Load... 14-3 14.4 Fueling Liquefied Petroleum (LP) Gas Forklifts... 14-3 14.5
More informationLOAD TEST PROCEDURE. Bridge, Gantry and Jib Cranes & Monorail Systems B001-R05/07
LOAD TEST PROCEDURE Bridge, Gantry and Jib Cranes & Monorail Systems B001-R05/07 Introduction: Load testing and inspection of overhead cranes is required by many safety regulations, national consensus
More informationWATERJET VISUAL TECHNICAL INSPECTION REPORT
WATERJET VISUAL TECHNICAL INSPECTION REPORT TYPE OF INSPECTION: PREREPAIR [ ] POST REPAIR/MANUFACTURE [ ] IN-SERVICE [ ] SHIP CLASS IDENTIFICATION DATA HULL NUMBER WATERJET IS INSTALLED? YES [ ] NO [ ]
More informationSB96-11B FAA APPROVED Supersedes SB96-11A, SB96-11, M84-16
TELEDYNE CONTINENTAL AIRCRAFT ENGINE SERVICE ULLETIN Compliance Will Enhance Safety SUJECT: PROPELLER STRIKES AND HYDRAULIC LOCKS. CATEGORY 3 S96-11 FAA APPROVED Supersedes S96-11A, S96-11, M84-16 PURPOSE:
More informationPart 0 - Classification and Surveys Classification and Surveys I-0 2016-01
Code Edition I - Ship Technology Part 0 - Classification and Surveys Classification and Surveys I-0 2016-01 Part 1 - Seagoing Ships Chapter 1 - Hull Structures I-1-1 2016-01 Chapter 1 - Hull Structures
More informationSTATE OF THE ART AND BENEFIT OF DE-ICING AND ANTI ICING TECHNOLOGIES For wind turbine operating in areas with icing condition
STATE OF THE ART AND BENEFIT OF DE-ICING AND ANTI ICING TECHNOLOGIES For wind turbine operating in areas with icing condition Agenda My background Why explore wind power in cold climate? Effects on wind
More informationOnshore Wind Services
GE Renewable Energy Onshore Wind Services www.ge.com/wind PITCH TABLE OF CONTENTS: 3 Operate and Maintain 3 Asset and Park Management 5 Turbine Maintenance 8 Enhance and Optimize 8 Wind PowerUp * Services
More informationSample Fall Rescue Plan for Bridge Work
This document is intended to provide guidance for developing fall rescue plans for bridge contractors. The Occupational Safety and Health Administration s (OSHA) regulation 29 CFR 1926.502(d)(20) states:
More informationGa Rankuwa Hotel School Skills Programme
Ga Rankuwa Hotel School Skills Programme Name of the programme: Accommodation services Duration: 4 weeks Notional learning hours: 160 Admission requirements Prospective students should: at least have grade
More informationQuality Assurance Calendar Laundry and Housekeeping Responsible Party Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Laundry Cleaning agent review and approval Appropriate chemical disinfection with low temperature wash cycles Laundry water temperature Laundry chemical dispensing Wash water ph Lint trap cleaning Equipment
More informationSAFE HANDLING OF PRECAST CONCRETE PRODUCTS
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special equipment and substantial planning and knowledge.
More informationEffective Operations Performance Management
Passion for Improving Performance Effective Operations Performance Management Presented by: Doug Spiers P.E., Esq. Vice President 11/17/10 Strategic Framework for Success Total Quality Management or TQM
More informationWind Turbine Technicians
Wind Turbine Technicians about ersg ersg is an international workforce solutions provider with expertise in delivering highly skilled professionals. We are established within the Renewables (particularly
More informationLiquefied Natural Gas (LNG)
Graduate Diploma in Petroleum Studies Major in Liquefied Natural Gas (LNG) INDUCTION Launching ceremony Week 39, 2012 Administration / Plant visit / Fundamentals of LNG and LNG main risks awareness Module
More informationCG: Computer Graphics
CG: Computer Graphics CG 111 Survey of Computer Graphics 1 credit; 1 lecture hour Students are exposed to a broad array of software environments and concepts that they may encounter in real-world collaborative
More informationAeronautics AERO, FLTEC, ATCAD
Aeronautics AERO, FLTEC, ATCAD Degrees: A.S. Air Traffic Control A.S. Aircraft Dispatcher A.S. Airframe A.S. Combined Airframe and Powerplant A.S. Flight Technology A.S. Powerplant Certificates of Achievement:
More informationBUILDING DYNAMICS, LLC
BUILDING DYNAMICS, LLC www.building-dynamics.com INDUSTRIAL HYGIENE 1216 Ashton Road Ashton, MD 20861 240.899.6926 (mobile) elight@building-dynamics.com HVAC ENGINEERING 703.963.0824 (mobile) jbailey@building-dynamics.com
More informationDENVER MODEL 30 X 30 SPECIFICATIONS
DENVER MODEL 30 X 30 SPECIFICATIONS Dimensions: Roof Dimensions 30-0 x 30-0 (4) Columns (Center to Center) 25-6½ x 25-6½ Minimum Clearance 8-0 Roof Height @ Peak Dependent on Col. Ht. Hip Roof 4:12 pitch
More informationThe Best Practices for Managing Early Childhood Learning Centers and Playgrounds on Campus
The Best Practices for Managing Early Childhood Learning Centers and Playgrounds on Campus Marsh Risk Consulting 44 Whippany Road P.O. Box 1966 Morristown, NJ 07962-1966 July 2011 The Best Practices for
More informationWorkforce Development. Tom Rogers Director, Workforce Development IACMI
Workforce Development Tom Rogers Director, Workforce Development IACMI Workforce Development Tom Rogers Workforce Development Director January 14, 2016 IACMI s workforce development goals: To establish
More informationMechanical Installation
Page -1-1. INTRODUCTION AND PURPOSE 1.1. This specification covers the installation, testing and precommissioning of mechanical equipment. Work is to be performed in conjunction with the manufacturer s
More informationCAER Construction and Environmental Resource
CAER Construction and Environmental Resource OLD COLONY HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy INTRODUCTION Safety is everybody's concern and is always an important consideration
More informationIMIA. Wind Turbine Generators. Claims. Codan Insurance / September 2007 Risk Engineer Truels Kjer
IMIA. Wind Turbine Generators. Claims. Codan Insurance / September 2007 Risk Engineer Truels Kjer Claims involving the main components of the turbine. September 2007 / Codan Insurance / Truels Kjer Page
More information