TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC)
|
|
|
- Anastasia Allen
- 9 years ago
- Views:
Transcription
1 TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC) Occupation Description means a person who maintains, rebuilds, overhauls, reconditions, and does diagnostic trouble shooting and repair of commercial truck and trailers. For detailed information on the scope of knowledge and skills taught and assessed in this program refer to the Program Outline, available on the ITA website. Pathways to Certification In BC, an individual can become certified as a by completing the program or by challenging the certification. Apprenticeship programs are for individuals who have an employer to sponsor them and challenge programs are for individuals who have extensive experience working in the occupation and wish to challenge the certification. Recommended Education The following education is recommended for apprentices entering this occupation. These are not prerequisites, but rather a desired level of skill or knowledge that will contribute to success in the industry. Grade 10 or equivalent including English 10, Mathematics 10 & Science 10. Preferred: Grade 12. ITA Registration Individuals who wish to begin an apprenticeship in this program must register with ITA along with their sponsor. Application forms for all programs are available from the ITA website. Online registration is also available for most programs through the ITA website. Those who wish to challenge the certification must complete the Challenge Application and submit it to ITA. Challenge applications are assessed for proof of workplace hours and scope of experience prior to acceptance of the individual into the Challenge pathway. TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC (BC 0191 RS40) Page 1 of 5
2 Apprenticeship Pathway This graphic provides an overview of the apprenticeship pathway. C of Q = Certificate of Qualification C of A = Certificate of Apprenticeship WBT = Work Based Training RED SEAL C of Q C of A RECOMMENDATION FOR CERTIFICATION Work Based Training: 4,950 hours total Interprovincial Red Seal Exam APPRENTICESHIP DIRECT ENTRY *Suggested duration based on 30 hour week CROSS PROGRAM CREDITS Individuals who hold the credentials listed below are entitled to receive partial credit toward the completion requirements of this program None TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC (BC 0191 RS40) Page 2 of 5
3 Apprenticeship Program Standards Credentials Awarded Transport Technician ( ) - Certificate of Qualification with Red Seal endorsement Transport Technician ( ) - Certificate of Apprenticeship ITA Registration Prerequisites Agreement signed by the employer to sponsor the apprentice Certification as a is awarded upon successful completion of: Requirement Level of Achievement Required Interprovincial Red Seal Exam Minimum 70% Work-Based Training Recommendation for Certification 4,950 hours Recommendation for certification signed by the Sponsor and an individual holding credentials eligible for sign-off authority Program Duration Sign-off Authority Challenging a Level Duration varies, but the program generally takes 3 years to complete. Credentials eligible to sign-off on the Recommendation for Certification: Transport Technician Certificate of Qualification Transport Technician Interprovincial Red Seal endorsement Truck and Transport Certificate of Qualification Truck and Transport Interprovincial Red Seal endorsement ITA-issued letter authorizing supervision and sign-off of apprentices in these occupations The following levels of technical training can be challenged for advanced placement in this program Level Prerequisites Cross-Program Credits Individuals who hold the credentials listed below are entitled to receive partial credit toward the completion requirements of this program Credential Credit(s) Granted TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC (BC 0191 RS40) Page 3 of 5
4 Challenge Pathway This graphic provides an overview of the challenge pathway. C of Q = Certificate of Qualification RED SEAL C of Q Interprovincial Red Seal Exam Prerequisites Approved Challenge Application, including: Trade Related Work Experience: 7,425 hours CREDIT FOR PRIOR LEARNING Individuals who hold the credentials listed below are entitled to receive partial credit toward the completion requirements of this program None Challenge Program Standards Credentials Awarded Transport Technician ( ) Certificate of Qualification with Red Seal endorsement ITA Registration Prerequisites An approved Challenge Application, which includes: 7,425 documented hours of directly related experience working in the occupation Credit for Prior Learning Individuals who hold the credentials listed below are considered to have met, or partially met, the prerequisites for challenging this program: Credential Credit(s) Granted Certification as a is awarded upon successful completion of: Requirement Level of Achievement Required Interprovincial Red Seal Exam Minimum 70% TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC (BC 0191 RS40) Page 4 of 5
5 Supporting Documents Transport ( ) Program Outline (2011) Defines the full scope of knowledge and skills required to competently perform the occupation in BC. Available from the ITA website. Transport National Occupational Analysis (2010) Prepared by industry experts, under the guidance of the federal government, for Red Seal trades to define the national standard of competence for the trade. Available from the Red Seal website: Contacts The Industry Training Authority (ITA) manages B.C. s industry training and apprenticeship programs. Contact ITA Customer service if you have any questions regarding registration, examinations or certification for this program. Telephone: Fax: Toll Free (within BC): [email protected] Website: Transportation Career Development Association of BC (transcda) works with industry to identify current and emerging knowledge and skill requirements for occupations related to this program, explore training and certification options, and maintain this program. Telephone: Fax: Website: [email protected] Revision History The standards for this program were reviewed and/or updated on the dates below. Program Standards Approved: March 2002 Updated: January 2006 Program Profiles are updated regularly. Visit for the most current version. TRANSPORT TRAILER TECHNICIAN (COMMERCIAL TRAILER MECHANIC (BC 0191 RS40) Page 5 of 5
TRUCK AND TRANSPORT MECHANIC (COMMERCIAL TRANSPORT VEHICLE MECHANIC) INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description
TRUCK AND TRANSPORT MECHANIC Occupation Description means a person who maintains, rebuilds, overhauls, reconditions, and does diagnostic troubleshooting of motorized commercial truck, bus, and road transport
HEAVY DUTY EQUIPMENT TECHNICIAN (HEAVY DUTY EQUIPMENT MECHANIC)
HEAVY DUTY EQUIPMENT TECHNICIAN (HEAVY DUTY EQUIPMENT MECHANIC) Occupation Description means a person who maintains, manufactures, overhauls, reconditions and repairs equipment powered by internal combustion
APPLIANCE SERVICE TECHNICIAN
APPLIANCE SERVICE TECHNICIAN Occupation Description refers to a person who repairs and maintains consumer related products including washers, dryers, stoves, refrigerators, dishwashers, microwave ovens
DIESEL ENGINE MECHANIC
DIESEL ENGINE MECHANIC Occupation Description means a person who installs, repairs, and maintains all internal combustion diesel engines and components as used in transport, construction and marine. For
CONSTRUCTION ELECTRICIAN (ELECTRICIAN)
CONSTRUCTION ELECTRICIAN (ELECTRICIAN) Occupation Description means a person who installs, constructs, alters, repairs, maintains, commissions, tests, services, calibrates and operates related electrical
SECURITY SYSTEMS TECHNICIAN
SECURITY SYSTEMS TECHNICIAN Occupation Description System means a person who designs, installs, repairs, maintains, replaces, tests, services the operation of all electronic security systems in accordance
AUTOMOTIVE SERVICE TECHNICIAN (AST 1, 2, 3 & 4)
AUTOMOTIVE SERVICE TECHNICIAN (AST 1, 2, 3 & 4) Occupation Description Technician (AST) is a person who repairs, adjusts and replaces mechanical, electrical and electronic parts of automobiles and light
CONSTRUCTION ELECTRICIAN
CONSTRUCTION ELECTRICIAN Occupation Description Construction means a person who installs, constructs, alters, repairs, maintains, commissions, tests, services, calibrates and operates related electrical
Grade 12 or equivalent including English 12, Algebra 11 or Trade Mathematics 11, and Physics 11 or Science & Technology 11
PLUMBER Occupation Description means a person who installs, alters or repairs any plumbing system including all work usually done by a journeyperson plumber governed by the BC Plumbing Code. For detailed
REFRIGERATION AND AIR CONDITIONING MECHANIC (REFRIGERATION MECHANIC)
REFRIGERATION AND AIR CONDITIONING MECHANIC (REFRIGERATION MECHANIC) Occupation Description means a person who fabricates, installs, alters, repairs/services any system used for cooling and/or heating
RESIDENTIAL FRAMING TECHNICIAN
RESIDENTIAL FRAMING TECHNICIAN Occupation Description A is a person who builds the concrete formwork, constructs the frame or supporting structure of single and multi-family buildings, encloses the building,
HAIRSTYLIST (COSMETOLOGIST)
HAIRSTYLIST (COSMETOLOGIST) Occupation Description Cosmetologist means a person who engages in the occupation of: a) Cutting, dressing, curling, waving, permanently waving, cleansing, bleaching or similar
ARBORIST TECHNICIAN INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification
ARBORIST TECHNICIAN Occupation Description An is a person who undertakes to prune and perform other work on trees from the ground. In their work s identify plants, select rigging gear, and have knowledge
INDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description "Industrial " means a person who inspects, installs, tests, troubleshoots, repairs, and services industrial electrical equipment and associated electrical
HEAVY DUTY EQUIPMENT TECHNICIAN (MECHANIC)
To qualify to challenge certification in this trade or be granted authority to supervise and sign-off on apprentices in this trade, individuals must have: worked a minimum of 9,000 hours performing the
How to Become an Electrician
Electrician Description Students who are interested in becoming electricians need to understand the pathways available to them. First, students need an understanding of the apprenticeship process. An electrical
Program Guide for Secondary School Apprenticeship
Program Guide for Secondary School Apprenticeship December 2007 Contents Introduction..................................................... 1 Key Characteristics of SSA........................................
THE PROFESSIONAL COOK APPRENTICE GUIDE FOR BC 1
THE COOK APPRENTICE GUIDE FOR BC 1 Congratulations! You re on your way to an exciting and rewarding career as a professional cook. Becoming a certified cook in BC means you can progress in your career,
Construction Boilermaker Apprenticeship
Construction Boilermaker Apprenticeship appliedtechnology.humber.ca FAQ s on Apprenticeship What is apprenticeship? Apprenticeship is hands-on training for people who enjoy learning by doing. The training
Plumbing Apprenticeship
Plumbing Apprenticeship appliedtechnology.humber.ca FAQ s on Apprenticeship What is apprenticeship? Apprenticeship is hands-on training for people who enjoy learning by doing. The training provides access
Diploma Requirements Procedure (up to the Class of 2016) Hoover City Schools September 2013
Note: These requirements apply to students who enrolled in the ninth (9 th ) grade before the 2013-14 school year. Graduation Credential Options The following sections describe the various options for
ACE IT PROGRAM GUIDE December 2010
ACE IT PROGRAM GUIDE December 2010 Ace It Program Guide TABLE OF CONTENTS ACE IT Program Overview...1 Frequently Asked Questions (FAQs)...3 What is an apprenticeship?...3 What is the difference between
Job Roles and Responsibilities in Canada. Automotive Service Technicians
Job Roles and Responsibilities in Canada Automotive Service Technicians Acknowledgments Winnipeg Technical College and the Department of Labour and Immigration of Manitoba wish to express sincere appreciation
Employment and Training Division Ministry of Training, Colleges and Universities
Employment and Training Division Ministry of Training, Colleges and Universities In this presentation Ontario s Apprenticeship System Becoming an Apprentice Benefits and Financial Incentives for Apprentices
Security Technician Certification Program
Security Technician Certification Program Forms part of the Certificate II in Technical Security CPP 20307 Introduction to the Program Incorporating AS 2201.1:2007 AS/ACIF S008:2006 AS/ACIF S009:2006 Telstra
031301 Engineering and Related Technologies > Electrical and Electronic Engineering and Technology >???? The Skills Organisation
TITLE NEW ZEALAND CERTIFICATE IN ELECTRICAL ENGINEERING (ELECTRICAL AND ELECTRONIC INSTALLATION AND SERVICE) (LEVEL 4) WITH STRANDS IN DOMESTIC SYSTEMS AND PRODUCTS, COMMERCIAL EQUIPMENT, AND CONSUMER
HAWAII BOARD OF MASSAGE THERAPY Frequently Asked Questions 2/27/2012
HAWAII BOARD OF MASSAGE THERAPY Frequently Asked Questions 2/27/2012 The answers to general questions (e.g. change of address, name change, duplicate pocket i.d. card/wall certificate, license verification
Tampa Bay IT Apprenticeship Program: Applicant Overview
Tampa Bay IT Apprenticeship Program: Applicant Overview Tampa Bay IT Apprenticeship Program Overview What is apprenticeship training? What is the Tampa Bay IT Apprenticeship Program? What occupations are
The Skills Organisation
OUTCOME STATEMENTS TITLE NEW ZEALAND CERTIFICATE IN ELECTRONIC ENGINEERING (LEVEL 4) VERSION 1 TYPE Certificate LEVEL 4 CREDITS 175 195?? NZSCED DAS CLASSIFICATION QUALIFICATION DEVELOPER 031301 Engineering
Top Ten Jobs Program Entry Prerequisites July 10, 2015
Top Ten Jobs Program Entry Prerequisites July 10, 2015 Statistics provided represent the percentage of students who entered grade 8 in 2007/2008 (class of 2013 students who may graduate with a dogwood
05-071 MAINE STATE BOARD OF EDUCATION Chapter 115: CERTIFICATION, AUTHORIZATION, AND APPROVAL OF EDUCATION PERSONNEL
05-071 MAINE STATE BOARD OF EDUCATION Chapter 115: CERTIFICATION, AUTHORIZATION, AND APPROVAL OF EDUCATION PERSONNEL SUMMARY: This rule contains the requirements for certification, authorization, and approval
IRONWORKERS LOCAL UNION 786
IRONWORKERS LOCAL UNION 786 APPRENTICESHIP POLICY PROCEDURE TO BE FOLLOWED BY PROSPECTIVE CANIDATES, CANDIDATES AND APPRENTICES FOR APPRENTICESHIP PROGRAM IN THE TRADE OF IRONWORKERS/RODMEN APPRENTICESHIP
05-071 MAINE STATE BOARD OF EDUCATION Chapter 115: CERTIFICATION, AUTHORIZATION, AND APPROVAL OF EDUCATION PERSONNEL
05-071 MAINE STATE BOARD OF EDUCATION Chapter 115: CERTIFICATION, AUTHORIZATION, AND APPROVAL OF EDUCATION PERSONNEL SUMMARY: This rule contains the requirements for certification, authorization, and approval
CAREER AND TECHNICAL EDUCATION PROGRAM STANDARDS
CAREER AND TECHNICAL EDUCATION PROGRAM STANDARDS Introduction The Career and Technical Education (CTE) Program Standards are designed to empower students to live, learn and work as productive citizens
Objective 1.01 Healthcare Career Preparation
Objective 1.01 Healthcare Career Preparation career decision making 1 Journal Prompt Even if you are on the right path, you will get run over if you are not moving. career decision making 2 Professional
R c e o c g o n g i n ti t on o n o f o P i r or o r E x E p x e p r e i r en e c n e c and Qualifications
Recognition of Prior Experience and Qualifications Trades Qualification (TQ) Provincial Certificate Holder For Interprovincial Status Agreement on Internal Trade (AIT) Experience Counts! Why is a Certificate
Technical and Vocational Education and Training (VET) in Austria. LSI Dietmar Vollmann, Landesschulrat für Steiermark
Technical and Vocational Education and Training (VET) in Austria 1 2 VET IN AUSTRIA PROPORTION OF ENROLMENT / GRADE 10 (2010/2011) vocational schools for apprentices 40 % secondary academic schools 18
Tennessee State Board of Education April 20, 2012 First Reading Item: III. B.
Tennessee State Board of Education Agenda April 20, 2012 First Reading Item: III. B. Trade & Industrial Education Licensure Policy & Rule Revision for Field of Criminal Justice The Background: In response
Report September, 2008 How Many is Too Many?
Report September, 2008 How Many is Too Many? A comparative analysis of journeyperson-to-apprentice ratios across Canada Plamen Petkov, Senior Policy Analyst Introduction Canada currently has 13 different
Trades & Heavy Industrial
Trades & Heavy Industrial Apprenticeship...140 Coker Technician...143 Heavy Equipment Technician Diploma...144 Mechanical & Construction Trades Preparation...146 Power Engineering: CML...148 Power Engineering:
Training Tax Credits for Apprentices Income Tax Act (British Columbia)
Bulletin PIT 002 www.gov.bc.ca/sbr ISSUED: December 2007 REVISED: MARCH 2008 Training Tax Credits for Apprentices Income Tax Act (British Columbia) Are you an apprentice registered with the Industry Training
Job Roles and Responsibilities in Canada. Industrial Mechanics/ Millwrights
Job Roles and Responsibilities in Canada Industrial Mechanics/ Millwrights Acknowledgments Winnipeg Technical College and the Department of Labour and Immigration of Manitoba wish to express sincere appreciation
Funds for Fleets. A guide to government funding opportunities for employers in Canada s trucking industry
Funds for Fleets A guide to government funding opportunities for employers in Canada s trucking industry Funds for Fleets Government funding opportunities for employers in Canada s trucking industry 1.
Common questions about the Step Up to Social Work Programme are answered here.
Programme Information 2.2 Step Up to Social Work DfE webpages FAQs Common questions about the Step Up to Social Work Programme are answered here. Eligibility I have a 2:2 degree, would you consider me
Ontario s Licensing Regulation and the Proposed Regulatory Amendments Q&As
Q1: Why was Ontario s licensing regime implemented? A1: Through province wide consultations and with industry support across the province, it was determined that consistent province wide licensing would
Frequently Asked Questions Trade Equivalency Assessment
Frequently Asked Questions Trade Equivalency Assessment If you believe you have experience and qualifications in a trade that are equivalent to having completed an Ontario apprenticeship program, you may
APPRENTICESHIP. Clearwater Campus Suncor Energy Industrial Campus
APPRENTICESHIP Suncor Energy Industrial Campus Keyano College offers the following apprenticeship programs: Carpentry Crane & Hoist Equipment Operator-Mobile Crane Electrical Heavy Equipment Technician
ST ALOYSIUS COLLEGE. AS/A Level GCE ICT (H117, H517) ICT & Computing Department
ST ALOYSIUS COLLEGE AS/A Level GCE ICT (H117, H517) ICT & Computing Department AS/A Level GCE ICT (H117, H517) Changes Assessment has been streamlined: the coursework element is still 40% but examinations
Digital Industries Apprenticeship: Assessment Plan. Infrastructure Technician. March 2016
Digital Industries Apprenticeship: Assessment Plan Infrastructure Technician March 2016 1 2 Digital Industries Apprenticeships: Infrastructure Technician Assessment Plan 1. General Introduction and Overview
Exploring Skilled Trades & Apprenticeship. This project is funded by the Government of Canada s Sector Council Program
Exploring Skilled Trades & Apprenticeship This project is funded by the Government of Canada s Sector Council Program Do you WANT Respect? Opportunity? Good Pay? What about a career in SKILLED TRADES?
Qualification Certificate Work Experience Application Guide
Qualification Certificate Work Experience Application Guide Apprenticeship and Industry Training This Qualification Certificate Program - Work Experience Application Guide is for experienced tradespeople
Mrs. Toinette Outland, Engineering & Technology Program Administrator. Mr. Michael Nichols, Principal. Heritage High School
Heritage High School & Technology Magnet Program Mrs. Toinette Outland, & Technology Program Administrator Mr. Michael Nichols, Principal Heritage High School 5800 Marshall Avenue Newport News, VA 23605
Electrical Foundation (Pre-Apprenticeship) Program ELECP Trades Training. Program Outline
Electrical Foundation (Pre-Apprenticeship) Program ELECP Trades Training Program Outline PROGRAM IMPLEMENTATION DATE: August 2005 OUTLINE EFFECTIVE DATE: February 2015 PROGRAM OUTLINE REVIEW DATE: February
Change the Message. Change the Path. Change a Future. Innovative Strategies to Promote Career and Technical Education Pathways
Change the Message. Change the Path. Change a Future. Innovative Strategies to Promote Career and Technical Education Pathways The Familiar Message + The usual scenario A student tests A student isn t
Trades Foundation Programs. Online Tutorial Academic Advising
Trades Foundation Programs Online Tutorial Academic Advising Topics of Discussion What Programs are offered at TRU Apprenticeship Training Admission Requirements Registration Procedures Financial Aid Bridging
GENERAL POLICY MANUAL
Section 4.1 Administration Issuing of Fire Protection and Detection Equipment Servicing Licences Approval Date: September 28, 2012 Sunset Date: December 31, 2015 Regulatory Reference: Document Reference:
Researching and Choosing a School
Researching and Choosing a School Updated May, 2015 This section is to help you determine what school best suits your learning style and training needs. It is your responsibility to investigate all of
2015-2016 Guide to Undergraduate Study
2015-2016 Guide to Undergraduate Study About Construction 3 Certificate of Higher Education - Construction 4 HNC in Construction and the Built Environment (Building Services Engineering) 5 Degree in Construction
TRADE EXAMINATIONS IN ONTARIO. Exam Preparation Guide
TRADE EXAMINATIONS IN ONTARIO Exam Preparation Guide March, 2014 TABLE OF CONTENTS 1. Introduction... 4 2. Getting Started... 4 3. Basic Examination Details for You to Know... 5 4. Scheduling Your Examination...
National Certificate in Refrigeration and Air Conditioning (Level 4)
NZQF NQ Ref 0130 Version 5 Page 1 of 11 National Certificate in Refrigeration and Air Conditioning (Level 4) Level 4 Credits 284 This qualification has been reviewed. The last date to meet the requirements
CTE PROGRAMS WITH MORE THAN ONE SUBJECT AREA (FORMERLY KNOWN AS DIVERSIFIED OCCUPATIONS)
CTE PROGRAMS WITH MORE THAN ONE SUBJECT AREA (FORMERLY KNOWN AS DIVERSIFIED OCCUPATIONS) Program Title: Career and Technical Education- Special Needs Students: special education identified special needs
The New Zealand qualifications in refrigeration and air conditioning
The New Zealand qualifications in refrigeration and air conditioning Programme handbook for employers and learners Competenz Refrigeration and Air Conditioning Training Programme Handbook 1 Contents About
CAREER TECHNICAL EDUCATION SECONDARY HOME ECONOMICS CAREERS AND TECHNOLOGY EDUCATION
Home Economics Careers Technology California Department of Education CREDENTIAL REQUIREMENTS TO TEACH A CONSUMER AND FAMILY STUDIES (CFS) PROGRAM AND A HOME ECONOMICS RELATED OCCUPATIONS (HERO) PROGRAM
CROWLEY'S RIDGE TECHNICAL INSTITUTE
CROWLEY'S RIDGE TECHNICAL INSTITUTE Enabling Laws Act 158 of 14 A.C.A. 6-51-91 et seq. History and Organization History - Act 8 of 19 established vocational technical schools. Crowley s Ridge Vocational
Slidell ISD 249908 EMPLOYMENT REQUIREMENTS AND RESTRICTIONS CREDENTIALS AND RECORDS
NOTICE TO PARENTS: QUALIFICATIONS ADDITIONAL INFORMATION PROFESSIONAL PERSONNEL CERTIFICATE FAILURE OF As a condition of receiving assistance under Title I, Part A of the ESEA (20 U.S.C. 6301 et seq.),
Researching and Choosing a School
Researching and Choosing a School Updated May, 2015 This section is to help you determine what school best suits your learning style and training needs. It is your responsibility to investigate all of
NORTHERN LIGHTS COLLEGE REGISTRAR S OFFICE PROGRAM INFORMATION AND COMPLETION GUIDE
NORTHERN LIGHTS COLLEGE REGISTRAR S OFFICE PROGRAM INFORMATION AND COMPLETION GUIDE Program Name: Aircraft Maintenance Engineering - Basic Training Credential/Certification: Diploma in Aircraft Maintenance
RECOGNITION OF PRIOR LEARNING & CREDIT TRANSFER POLICY AND PROCEDURE
RECOGNITION OF PRIOR LEARNING & CREDIT TRANSFER POLICY AND PROCEDURE 1. Introduction 1.1. The purpose of this policy is to provide for the assessment and credit of various types of learning undertaken
Construction Project Management and Quantity Surveying Degree Apprenticeships
Construction Project Management and Quantity Surveying Degree Apprenticeships Programme Outline Overview The Construction Project Management and Quantity Surveying Degree Apprenticeships have been developed
WEB DESIGN AND DEVELOPMENT CURRICULUM FRAMEWORK
WEB DESIGN AND CURRICULUM FRAMEWORK This document was prepared by: Office of Career, Technical, and Adult Education Nevada Department of Education 755 N. Roop Street, Suite 201 Carson City, NV 89701 The
Title: EAL Level 2 NVQ Diploma in BusinessImprovement Techniques (QCF) At a glance. Level: Credit value: Guided learning hours: Minimum learner age:
Title: EAL Level 2 NVQ Diploma in BusinessImprovement Techniques (QCF) At a glance Qualification code: Level: Credit value: Guided learning hours: Minimum learner age: Registration end date: Certification
DELIVERY, ASSESSMENT AND STAFF ARRANGEMENT STRATEGY
DELIVERY, ASSESSMENT AND STAFF ARRANGEMENT STRATEGY Name of Registered Training Organisation: MTA Group Training Scheme Provider Number: 2293 Delivery Period: 01/01/2015 to 31/12/2015 Qualification: AUR20212
High School Apprenticeship Program (HSAP) It Pays to be an Apprentice
High School Apprenticeship Program (HSAP) It Pays to be an Apprentice What is Apprenticeship? Apprenticeship is a great way to train to become a certified journeyperson in a trade where your credentials
Vocational Education and Training in Schools Guidelines
Vocational Education and Training in Schools Guidelines Department of Training and Workforce Development Department of Education 1. Introduction These guidelines support the implementation of the Joint
Florida Department of Health in Volusia County. Irrigation Contractor Packet
Florida Department of Health in Volusia County Irrigation Contractor Packet September 2014 Florida Department of Health in Volusia County Irrigation Contractor Packet The application fee of $25.00 must
QUALIFICATION CERTIFICATE PROGRAM WORK EXPERIENCE
QUALIFICATION CERTIFICATE PROGRAM WORK EXPERIENCE APPLICATION GUIDE FOR TEMPORARY FOREIGN WORKERS INFORMATION AND INSTRUCTIONS This Guide relates to the Qualification Certificate Program Work Experience
AUTOMOTIVE TECHNOLOGY (ATECH)
AUTOMOTIVE TECHNOLOGY (ATECH) The Automotive Technology curriculum is designed to prepare students for employment as apprentice auto mechanics or to allow students to continue toward a Baccalaureate degree
CIMA Masters Gateway Assessment
CIMA Masters Gateway Assessment CIMA acknowledges people with MBAs as future business leaders. However, it is clear that in the competitive global market for talent, businesses are looking for more than
Refrigeration and Air Conditioning (England)
Refrigeration and Air Conditioning (England) Latest framework version? Please use this link to see if this is the latest issued version of this framework: afo.sscalliance.org/frameworkslibrary/index.cfm?id=fr01514
Study Regulations for the Bachelor of Science in International Management
Study Regulations for the Bachelor of Science in International Management 24 June 2015 Due to the accreditation as a private university (decision of the Austrian Accreditation Council on 12 July 2007 according
Job Roles and Responsibilities in Canada. Chefs
Job Roles and Responsibilities in Canada Chefs Acknowledgments Winnipeg Technical College and the Department of Labour and Immigration of Manitoba wish to express sincere appreciation to all contributors.
Modern apprenticeships. A guide to skills and qualifications on Scottish apprenticeships
Modern apprenticeships A guide to skills and qualifications on Scottish apprenticeships Prepared by Audit Scotland March 2014 Auditor General for Scotland The Auditor General s role is to: appoint auditors
