Intelligent Roofing Systems Flat roofs Roof details. The specialist for liquid applied waterproofing

Transcription

1 The specialist for liquid applied waterproofing

2 Absolutely watertight flat roofs You can focus on the really important things. We take care of the details. With a -waterproofed flat roof, you can rest assured that it will remain watertight. Cracks in the roofing membranes, weathered waterproofing of details or simply leaky old flat roofs: even if a roof only has a leak at one spot, it can no longer perform its function. Why make do with half measures? The liquidapplied waterproofing products from offer a high-quality alternative to conventional materials. waterproofing systems fully bond to any and all forms. That is why solutions involving systems are used not only for area waterproofing, but are particularly effective for detailed or intricate roof structures like dome, butterfly, shed and high-point shell roofs.

3 Long-lasting protection with intelligent roof systems A waterproofing system must adapt to the conditions on the flat roof, offer maximum design flexibility and perform its function without compromise. To put it simply, the roof must be watertight. Only an intelligent roof system can meet these requirements. By choosing liquid applied waterproofing systems, you are choosing a long-term solution. Property references spanning over 30 years in this field demonstrate the quality of our solutions. systems can be used both for refurbishment and for new buildings. The diverse properties of the material can generally spare the client the expense of removing the existing waterproofing system.

4 Solutions for all requirements Surface waterproofing systems Detail waterproofing systems Requirement ProTect DS ProThan ProDetail ProThan Detail Surface waterproofing of roofs Surface waterproofing of roofs with a pitch of less than 2% Repair material for rapid waterproofing underneath green roofs of details and flashing interfaces between various materials of partial sections and areas in odour-sensitive areas Test certificates (selection)* ETA ETA Fire test ETA Fire test Suitable Special solution *Further information available in the system descriptions Roof surface waterproofing systems ProTect ProTect is a fully reinforced waterproofing system with a polymethyl methacrylate (PMMA) base with material properties which offer top performance. This means it can be used for roof waterproofing and a host of other applications. The mechanically resistant and highly weather-resistant material can also be used underneath other coatings, for example: gravel, paving or grass. The extremely high hydrolysis resistance of ProTect means it can even be used in standing water applications, e.g., for ornamental fountains. Hydrolysis resistant High chemical resistance Fast-curing Suitable for all green roofs, root and rhizome resistant to FLL Can be used at substrate temperatures of down to -5 C Extremely weather-resistant (UV, IR, etc.) Can withstand normal foot traffic European Technical Approval with CE mark Finish

5 Roof surface waterproofing systems DS DS is mainly used in refurbishment projects for good reason. What is needed for refurbishment projects is not a cheap fix, but a long-lasting reliable solution. The fully reinforced waterproofing system made from unsaturated polyester (UP) resin is vapour-permeable and, under certain conditions, can be applied without removing the old roof build up. Structural elements like expansion joints can be homogeneously integrated. With its high resilience and UV resistance, DS can compensate for horizontal and vertical movement. Fast-curing Excellent adhesion properties on a multitude of substrates Suitable for all green roofs, root and rhizome resistant to FLL Extremely weather-resistant (UV, IR, etc.) Can withstand maintenance foot traffic European Technical Approval with CE mark A proven system for 30 years Finish ProThan ProThan is a fully reinforced waterproofing system with a polyurethane (PUR) resin base. The system is used particularly in odour-sensitive areas. These include schools, hospitals and nursing homes for the elderly as well as buildings with a high volume of public traffic. ProThan is UV- and weather-resistant and does not need an additional protective coating. Odourless UV-resistant Weather-resistant Can withstand normal foot traffic Can be used in substrate temperatures of +8 C and above Fire-tested Solvent-free

6 Detail waterproofing systems ProDetail ProDetail is a fully reinforced detail system with a polymethyl methacrylate (PMMA) base and has many applications. As well as being a repair material, it is also used as a detail solution in the ProTect and DS roof systems. The waterproofing resin has technical properties which also make it suitable for use in systems on balconies and in car parks. ProDetail is also a proven performer in special applications, such as the preservation of monuments. Fast-curing Suitable for all green roofs, root and rhizome resistant to FLL Can be used at substrate temperatures of down to -5 C Extremely weather-resistant (UV, IR, etc.) The thixotropic material is designed for work on vertical surfaces European Technical Approval with CE mark Finish ProThan Detail ProThan Detail is a reinforced waterproofing system with a polyurethane (PUR) resin base, which is used for roof flashing and details. The waterproofing system is specially designed for odour-sensitive roof areas, such as ventilation shafts. In addition, ProThan Detail is the detail solution in the ProThan surface system. The thixotropic material is designed so that it does not slide off vertical surfaces during application. Odourless The thixotropic material is designed for work on vertical surfaces UV-resistant Weather-resistant Can be used at substrate temperatures of +8 C and above Fire-tested Solvent-free

7 Versatility in roof landscapes New buildings constitute the main application field for roofing membranes, where a quick, practical solution is sought above all else. If the roof waterproofing system has to meet high standards of safety and security or the building has particular requirements to function and design, solutions are used. This may be because expensive technical equipment is housed underneath or because future access will be difficult and a long term solution is required. In the long term, using waterproofing systems in new buildings is worthwhile. Refurbishments can be costly undertakings if the existing roof build-up has to be removed and a new build up installed so as not to put the stability at risk. With a low mass per unit area and full-surface adhesion, systems can be applied to old waterproofing systems. A protective layer is not necessary, since the material is highly resistant to both weather and chemicals. liquid-applied waterproofing is vapour-permeable, meaning that the structural properties of existing functional layers are not diminished. Repairs are necessary from time to time if minor leaks arise in a building. Most are caused by a combination of materials with different expansion coefficients; a situation that arises with almost all details and roof penetrations. waterproofing systems adhere to up to approximately 90% of all the usual substrates available in the flat roof market. This gives you confidence in your combination of materials. All systems are highly resilient and flexible in low temperatures and have excellent mechanical properties thanks to non-woven reinforcement. Liquid application ensures seamless and jointless waterproofing of all details and is fully bonding to the substrate. and designing systems from are available in a range of other colours apart from the standard grey shades. Maintenance paths can be colourcontrasted and colours can be matched up to other materials of a different colour. The hard-wearing and root-resistant material can be used for inverted roofs as well as green roofs.

8 Intelligent Solutions ISO Quality application systems are applied by trained and experienced specialists. All companies that work with are selected on the basis of a requirement profile that guarantees the high standards in workmanship and service for the customer. products are based on over 30 years of experience, combined with continuous development and waterproofing system solutions which have been tried and tested in a whole range of applications. The company is certified to ISO 9001:2000 and products have obtained ETA approval; just two of the factors that contribute to the high standard of quality. The next step Our goal is make life that little bit easier for you. We will provide you with all the information you need to reach a clear decision. Our technical support team will be pleased to visit you on site. For detailed system descriptions, bills of quantities, as well as colour scheme suggestions, please contact us at the following address or simply visit Beschichtungssysteme GmbH & Co. KG Karlstrasse Minden Germany Tel Fax [email protected] A company of the Follmann Group 092 Intelligente Dachsysteme EN-A4-09/2008