INDUSTRIAL STRENGTH. work light range

Transcription

1 INDUSTRIAL STRENGTH work light range

2 Purpose built to survive the harshest, toughest conditions on earth. The Hammerheads Industrial Strength Work Light Range was born from a culmination of the experience and intellectual property gathered through the notable history of OEX work lights servicing the extreme environment of the Australian mining industry. Integral to the development of this well thought out, well constructed range is that it has been designed from the ground up in contrast to simply adapting an existing light to suit the application. The Hammerheads Industrial Strength Work Light Range is a high quality, functional range designed to change the landscape of quality industrial lighting forever!

3

4 Features & Benefits Revolutionary Protrac 360 Aiming System Hammerheads can be adjusted before fitment using the plate and rotation angles on the revolutionary Protrac bracket. A fit out library is also available to suit common mining equipment with known locations and angles for the optimum beam pattern. Electronic Thermal Management In an extraordinary situation where the light is subjected to massive heat overload, a self protection protocol is engaged to reduce the light output, until such time as the heat overload retreats to normal parameters. Beam Pattern Identification Using a clever coloured disc system, each beam pattern is linked to a different disc colour. This ensures beam patterns are easily distinguished for identification and eventual end of life replacement. Soft Start Technology Low in rush current on start up reduces wear on associated components which is particularly important on machines where multiple lights are used. It avoids light misfires and eases load on existing wiring. This feature helps reduce costly downtime. Note: Soft start is not incorporated in 2 LED versions as in rush current is determined to be too small to benefit from this attribute. IP69K Rated The IP69K rating ensures that the work lights are dust tight with no ingress of dust and protected against high pressure, high temperature wash downs. The IP69K rating is the highest protection available. Ideal for water cannon wash downs. Reverse Polarity Operation Hammerheads will operate even when the polarity to the light is reversed. This is an advantage when retro-fitting Hammerheads to equipment that has previously been fitted with different work lights. This reduces the installation times for the technicians on site, therefore further reducing costs. It also prevents accidental damage caused by incorrect installation. Gold DT Connectors Any product is only as good as its components and Hammerheads Deutsch Gold Pin DT Connectors are designed specifically for harsh environmental conditions, where even a small degradation in connection may be critical to the performance of the work lights. The gold pins will help provide the reliability and performance that the Hammerheads brand requires. Dielectric grease is also provided with each Hammerhead to assure brilliant electrical connection is attained.

5 Outstanding Light Output The latest Cree XM-L2 10 watt LEDs provide a mass volume of light where you need it most. The colour temperature of LED is closer to that of sunlight which reduces eye strain and enables excellent peripheral vision. CISPR 25 - Class 3 Rating The CISPR 25 - Class 3 rating ensures that Hammerheads do not introduce any RF noise into electronics/radios, enabling unrestricted critical communication. Fully Suspended Shock Dampening System With the revolutionary Protrac 360 suspended mounting system the Hammerheads can withstand vibration up to 60G. Long Life - 50,000 Hours Hammerheads light output is warranted for 50,000 hours or 6 years. (excluding physical or environmental damage). Using Pulse Width Modulation (PWM), the LEDs are being turned on and off at a frequency quicker than the human eye can detect. This technology allows the LEDs to be driven hard whilst still achieving long life span. Environmental Non-Stick Coating The Hammerheads Industrial Strength Work Light Range boasts an Interpon 810 coating which imparts a low-friction, wear resistant surface to the lights, enabling them to remain unaffected by chemical environments. Very few solid substances will permanently adhere to an Interpon 810 finish and, in many cases, surfaces are self-cleaning.

6 Every Light, every beam, every situation. All work lights are available in a number of beam patterns including Spot, Flood, Wide Flood and Elliptical. Custom beam configurations are also available upon request. Universal Specifications Colour Temp: 6,000 Kelvin Input Voltage: 11-65VDC LED Type: Cree XM-L2 Wattage per LED: 10W IP Rating: IP69K Dust Proof & Water Submersible: 3m / 9.8ft Vibration Dampened & Shock Proof: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins Lens: Polycarbonate Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel Bolt Hole Size: M10 - M12

7 Easy Coloured Disc Identifier - Beam Patterns The entire Hammerheads range utilise a clever coloured disc system which quickly identifies the beam pattern of the light. For example the yellow discs indicate the light has a Flood beam pattern, whilst the red discs indicate the light uses a Spot beam pattern. This attribute is highly useful when the time comes to replace the light, as the visual cue of the colour allows the correct beam pattern to be identified without having to remove the light first to identify its beam pattern. Spot Beam The pattern and high volume of light output makes the focused beam ideal where precise illumination and light control is critical. Flood Beam The pattern boasts greater spread around the light and reduced intensity at the outer limits. Ideal when requiring a large volume of light spread around a work site or vehicle. Wide Flood Beam The pattern boasts an even greater spread around the light and reduced intensity at the outer limits. Ideal when requiring a wider volume of light illuminating a work site or warehouse. Elliptical Beam The pattern produces an oval beam pattern with a wider amount of light covering a medium distance. Ideal for when more penetration is required from the light. Great for applications that don t require much upward or downward light. Custom Beam Whilst spot, flood, wide flood and elliptical beam patterns will suit most applications, there are certain applications that may require a custom beam pattern. Contact your local Hammerheads distributor for more information on how we can tailor our Hammerheads to suit your individual requirements.

8 2 LED INDUSTRIAL STRENGTH work light

9 Specifications Available Beam Patterns Raw Lumens: 1,840 3 Effective Lumens: 1,198 Current Draw: V DC 20W (10W per LED) Spot Beam Part No. HHL kg / 2.20lb M10 Flood Beam Part No. HHL Wide Flood Beam Part No. HHL mm / 4.90in 3 Elliptical Beam Part No. HHL mm / 3.38in 87mm 3.43in Custom Beam Customise your own beam pattern to suit your needs

11 Specifications Available Beam Patterns Raw Lumens: 3,680 3 Effective Lumens: 2,679 Current Draw: V DC 40W (10W per LED) Spot Beam Part No. HHL kg / 4.85lb M10 Flood Beam Part No. HHL Wide Flood Beam Part No. HHL mm / 5.34in Elliptical Beam Part No. HHL mm 5.20in Custom Beam Customise your own beam pattern to suit your needs 101mm / 3.98in

13 Specifications Available Beam Patterns Raw Lumens: 5,521 3 Effective Lumens: 3,909 Current Draw: V DC 60W (10W per LED) Spot Beam Part No. HHL kg / 5.95lb M10 Flood Beam Part No. HHL Wide Flood Beam Part No. HHL m / 6.88in 3 Elliptical Beam Part No. HHL mm 5.20in Custom Beam Customise your own beam pattern to suit your needs 101mm / 3.98in

15 Specifications Available Beam Patterns Raw Lumens: 8, Effective Lumens: 5,849 Current Draw: V DC 90W (10W per LED) Spot Beam Part No. HHL kg / 9.70lb M10 Flood Beam Part No. HHL Wide Flood Beam Part No. HHL m / 6.88in Elliptical Beam Part No. HHL mm 6.81in Custom Beam Customise your own beam pattern to suit your needs 12m / 4.92in

17 Specifications Available Beam Patterns Raw Lumens: 14, Effective Lumens: 10,053 Current Draw: V DC 160W (10W per LED) Spot Beam Part No. HHL kg / 13.23lb M12 Flood Beam Part No. HHL mm / 15.07in Wide Flood Beam Part No. HHL mm 5.43in Elliptical Beam Part No. HHL mm / 4.80in a b c d e Custom Beam Customise your own beam pattern to suit your needs a: 91mm / 3.58in, b: 5m / 2.16in, c: 38mm / 1.49in d: 7m / 2.75in, e: / 1.96in

19 Specifications Available Beam Patterns Raw Lumens: 29,446 Effective Lumens: 19,458 Current Draw: V DC 320W (10W per LED) 11kg / 24.25lb M12 Spot Beam Part No. HHL Flood Beam Part No. HHL Wide Flood Beam Part No. HHL mm / 15.19in m 9.06in b c d Elliptical Beam Part No. HHL mm 6.46in a: 13m / 5.31in, b:76mm / 2.99in, c: 84mm / 3.30in d: 7m / 2.75in, e: / 1.96in e a Custom Beam Customise your own beam pattern to suit your needs

20 FITOUT example caterpillar 793 Dump Truck Fitout No. Part No. Disc Colour Orientation Side Position Comments Plate Angle Rotation Angle 1 HHL FLOOD Forward facing Right side outer Above wheels Forward facing, Above right wheel HHL SPOT Forward facing Right side inner Above wheels Forward facing, Above right wheel HHL SPOT Forward facing Left side inner Above wheels Forward facing, Above left wheel HHL FLOOD Forward facing Left side outer Above wheels Forward facing, Above left wheel HHL FLOOD Forward facing Right side outer OEM front bar position Front facing, Right side of front bumper HHL SPOT Forward facing Right side inner OEM front bar position Front facing, Right side of front bumper HHL SPOT Forward facing Left side inner OEM front bar position Front facing, Left side of front bumper HHL FLOOD Forward facing Left side outer OEM front bar position Front facing, Left side of front bumper HHL FLOOD Forward facing Left side Below operator cabin Forward facing, below operators platform HHL SPOT Rear facing Right side Below rear lift cylinder Rear facing inward, below rear cylinder HHL SPOT Rear facing Left side Below rear lift cylinder Rear facing inward, below rear cylinder HHL FLOOD Rear facing Right side Below operator cabin Rear facing, below operator platform HHL FLOOD Rear facing Left side Below operator cabin Rear facing, below operator platform HHL FLOOD n/a n/a Facing towards ladder access Access lighting ladder rail HHL FLOOD n/a n/a Facing towards ladder access Access lighting ladder rail HHL FLOOD n/a n/a Facing towards ladder access Access lighting ladder rail HHL FLOOD n/a n/a As required Engine compartment - -

21 Specifications - HHL Specifications - HHL Beam Pattern: Flood Beam Beam Pattern: Spot Beam Raw Lumens: 1,840 Raw Lumens: 5,521 Effective Lumens: 1,198 Effective Lumens: 3,909 Current Draw: V DC Current Draw: V DC Colour Temp: 6,000 Kelvin Colour Temp: 6,000 Kelvin Input Voltage: LED Type: 11-65V DC Cree XM-L mm / 4.90in Input Voltage: LED Type: 11-65V DC Cree XM-L2 17m / 6.88in 20W (10W per LED) 60W (10W per LED) 1kg / 2.20lb 2.7kg / 5.95lb IP Rating: IP69K Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins 87mm 3.43in IP Rating: IP69K Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins 132mm 5.20in Lens: Polycarbonate Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel 86mm 3.98in Lens: Polycarbonate Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel M10 M10 101mm / 3.98in Specifications - HHL Beam Pattern: Flood Beam Raw Lumens: 5,521 Effective Lumens: 3,909 Current Draw: V DC Colour Temp: 6,000 Kelvin Input Voltage: 11-65V DC LED Type: Cree XM-L2 60W (10W per LED) 2.7kg / 5.95lb IP Rating: IP69K Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins Lens: Polycarbonate Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel M m / 6.88in mm / 3.98in 132mm 5.20in

22 FITOUT example caterpillar d10 dozer Fitout No. Part No. Disc Colour Orientation Side Position Comments Plate Angle Rotation Angle 1 HHL FLOOD Forward facing Right side outer Above lift cylinder Right lift cylinder, right position HHL SPOT Forward facing Right side inner Above lift cylinder Right lift cylinder, Left position HHL SPOT Forward facing Left side inner Above lift cylinder Left lift cylinder, right position HHL FLOOD Forward facing Left side outer Above lift cylinder Left lift cylinder, Left position HHL FLOOD Forward facing Right side Above operator cabin Cabin roof, forward facing right HHL FLOOD Forward facing Left side Above operator cabin Cabin roof, forward facing left HHL FLOOD Rear facing Right side Rear of operator cabin Cabin roof, rear facing right HHL FLOOD Rear facing Left side Rear of operator cabin Cabin roof, rear facing left HHL FLOOD Rear facing Right side Rear ripper Ripper rear facing right HHL FLOOD Rear facing Left side Rear ripper Ripper rear facing left HHL SPOT Right facing Right side Facing side of blade Cabin platform forward facing right side of blade HHL SPOT Left facing Left side Facing side of blade Cabin platform forward facing left side of blade HHL FLOOD Left facing n/a Facing towards ladder access Cabin access lighting HHL FLOOD n/a n/a As required Engine compartment - -

23 Specifications - HHL Specifications - HHL Beam Pattern: Flood Beam Beam Pattern: Spot Beam Raw Lumens: 1,840 Raw Lumens: 3,680 Effective Lumens: 1,198 Effective Lumens: 2,679 Current Draw: V DC Current Draw: V DC Colour Temp: 6,000 Kelvin Colour Temp: 6,000 Kelvin Input Voltage: LED Type: 11-65V DC Cree XM-L mm / 4.90in Input Voltage: LED Type: 11-65V DC Cree XM-L mm / 5.34in 20W (10W per LED) 40W (10W per LED) 1kg / 2.20lb 2.2kg / 4.85lb IP Rating: IP69K Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins 87mm 3.43in IP Rating: IP69K Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins 132mm 5.20in Lens: Polycarbonate Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel M10 86mm 3.98in Lens: Polycarbonate Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel M10 101mm / 3.98in Specifications - HHL Specifications - HHL Beam Pattern: Flood Beam Beam Pattern: Flood Beam Raw Lumens: 3,680 Raw Lumens: 5,521 Effective Lumens: 2,679 Effective Lumens: 3,909 Current Draw: V DC Current Draw: V DC Colour Temp: 6,000 Kelvin Colour Temp: 6,000 Kelvin Input Voltage: LED Type: 11-65V DC Cree XM-L mm / 5.34in Input Voltage: LED Type: 11-65V DC Cree XM-L2 17m / 6.88in 40W (10W per LED) 60W (10W per LED) 2.2kg / 4.85lb 2.7kg / 5.95lb IP Rating: IP69K IP Rating: IP69K Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins 132mm 5.20in Vibration Tested: Up to 60G EMC / EMI Rating: CISPR 25 - Class 3 Connector: DT04-2P with Gold Pins 132mm 5.20in Lens: Polycarbonate Lens: Polycarbonate Environmental Coating: Interpon 810 Environmental Coating: Interpon 810 Bracket Material: m 304 Stainless Steel M10 101mm / 3.98in Bracket Material: m 304 Stainless Steel M10 101mm / 3.98in

24 Phone: info@lucentengineering.com Lucent Engineering Singapore Eastlink Building - Blk.3018, Bedok North Street 5 Unit 03-22, Singapore USA 1601 Boundary Blvd, Auburn, WA USA Korea 92 Cheong Jung-Ro, Cheong Cheon-Dong, Bupyung Ku Incheon, Korea Distributors Australia Ashdown-Ingram 5 Viola Place Export Park Brisbane Airport 4007 Phone: Fax: export@ashdown-ingram.com.au New Zealand Ashdown-Ingram 22 Sylvia Park Road Mt Wellington Auckland 1060 Phone: Fax: auckland@ashdown-ingram.com.nz Papua New Guinea Ashdown-Ingram 5 Viola Place Export Park Brisbane Airport 4007 Phone: Fax: export@ashdown-ingram.com.au Indonesia Ashdown-Ingram 5 Viola Place Export Park Brisbane Airport 4007 Phone: Fax: export@ashdown-ingram.com.au South Africa Probe Integrated Mining Technologies 245 Albert Amon Road Meadowdale Germiston Johannesburg Gauteng South Africa 1641 Phone: Phone: Fax: nic@probegroup.co.za Sweden Rindab Svarvarvägen Saltsjö-Boo Stockholm Telefon: E-post: rindab@rindab.se USA - Nevada 5th Gear Industrial Th St ELKO, NV , USA Phone: Fax: info@5thgearindustrial.com USA - Arizona Sunwest Supply 15 E Sahuaro St Tucson, AZ , USA Phone: Fax: info@sunwesttec.com Copyright 2014 Lucent Engineering