KENNIS R-40 TECHNISCHE SPECIFICATIE / TECHNICAL SPECIFICATIONS
|
|
|
- Noah Pierce
- 8 years ago
- Views:
Transcription
1 KENNIS R-40 TECHNISCHE SPECIFICATIE / TECHNICAL SPECIFICATIONS
2 Technische data, Technical data, R-40/75-3 R-40/87-4 R-40/100-3 R-40/120-4 Maximaal dynamisch moment, Max dynamic moment Maximale steunpoot belasting, Max force on stabilizer leg Max standaard steunpoot druk op de grond Max standard stabilizer pressure on the ground danm danm dan/cm² 11 Hydraulisch bereik, Hydraulic reac m Opvouwbaar, Foldable, Y/N Y Y N N Zwenkmoment, Slewing moment, danm 4620 Zwenkbereik, Slewing angle, º Rijsnelheid, Driving speed, m/s 0.5 Hoogte, Height, mm Breedte ingevouwen, Width folded, mm Inbouwlengte, Length, mm Max. afstempelbasis, Max. stabiliser spread, mm 7700 Gewicht standaard kraan, Weight basic crane, (± 5%) kg Werkdruk, Working pressure, bar 280 Max. pompopbrengst, Max. Oil capacity, l/min Continu variabel Benodigd vermogen, Required power, kw 36 Olietankinhoud, Oiltank capacity, l 100 Dieseltank inhoud, Dieseltank capacity, l Spoorbreedtes, Track, mm * Flensdikte, flange thickness, mm 25 Normen, Design standard DIN H1-B3 EN12999 subject to change without notice 2 DO-E R40-SPEC / / RV AA
3 Afmetingen, Dimensions R-40/75-3 Spoorbreedte, Track: 1300 mm. subject to change without notice 3 DO-E R40-SPEC / / RV AA
4 Afmetingen, Dimensions R-40/87-4 Spoorbreedte, Track: 1300 mm. subject to change without notice 4 DO-E R40-SPEC / / RV AA
5 Afmetingen, Dimensions R-40/100-3 Spoorbreedte, Track: 1300 mm. subject to change without notice 5 DO-E R40-SPEC / / RV AA
6 Afmetingen, Dimensions R-40/100-3 Spoorbreedte, Track: 1300 mm. subject to change without notice 6 DO-E R40-SPEC / / RV AA
7 Afmetingen, Dimensions R-40/120-4 Spoorbreedte, Track: 1300 mm. subject to change without notice 7 DO-E R40-SPEC / / RV AA
8 Afmetingen, Dimensions R-40/120-4 Spoorbreedte, Track: 1300 mm. subject to change without notice 8 DO-E R40-SPEC / / RV AA
9 Lastdiagram, Loaddiagram: R-40 / 75-3 subject to change without notice 9 DO-E R40-SPEC / / RV AA
10 Lastdiagram, Loaddiagram: R-40 / 87-4 subject to change without notice 10 DO-E R40-SPEC / / RV AA
11 Lastdiagram, Loaddiagram: R-40 / subject to change without notice 11 DO-E R40-SPEC / / RV AA
12 Lastdiagram, Loaddiagram : R-40 / subject to change without notice 12 DO-E R40-SPEC / / RV AA
13 Giek afmetingen, Boom - Dimensions R-40 / 87-4 R-40 / R-40 / subject to change without notice 13 DO-E R40-SPEC / / RV AA
14 Gewicht zwaartepunten, Weight center of gravity R-40 / R-40 / R-40 / 87-4 subject to change without notice 14 DO-E R40-SPEC / / RV AA
15 Cilinders en pen afmetingen, Cylinders and pins dimensions. Type of crane: Non Foldable. Hefcilinder Knikcilinder Lifting Cylinder (2x) Articulation Cylinder Cylinder bore 150 Cylinder bore 220 Cyl. Ext. diameter 180 Cyl. Ext. diameter 273 Rod diameter Rod diameter 120 Pitch (open) 1770 Pitch (open) 2140 Pitch (closed) 1050 Pitch (closed) 1285 Stroke 720 Stroke 855 Fittings G1/2" Fittings G1/2" Artic. Pin Ø 1x 90 1x 55 Artic. Pin Ø 1x90 1x65 Pin steel Uitschuifcilinders Pin steel Uitschuifcilinders Extension cylinders 1 KE Extension cylinders 2 KE Cylinder bore 80 Cylinder bore 80 Cyl. Ext. diameter 95 Cyl. Ext. diameter 95 Rod diameter Rod diameter Pitch (open) 3837 Pitch (open) 3770 Pitch (closed) 2132 Pitch (closed) 2065 Stroke 1705 Stroke 1705 Fittings G3/8" Fittings G3/8" Artic. Pin Ø Artic. Pin Ø Pin steel C45 / S355JO Pin steel C45 / S355JO Uitschuifcilinders Uitschuifcilinders Extension cylinders Extension cylinders Cylinder bore 80 Cylinder bore 80 Cyl. Ext. diameter 95 Cyl. Ext. diameter 95 Rod diameter Rod diameter 40 Pitch (open) 2905 Pitch (open) 2910 Pitch (closed) 2110 Pitch (closed) 2110 Stroke 1805 Stroke 1805 Fittings G1/2 Fittings G1/2 Artic. Pin Ø 26 Artic. Pin Ø 26 Pin steel Pin steel subject to change without notice 15 DO-E R40-SPEC / / RV AA
16 Minimale eisen trailer, Minimum requirements trailer, Deze informatie niet gebruiken voor sterkteberekeningen This information is not suiteble for strenght calculations Minimale eisen trailer subject to change without notice 16 DO-E R40-SPEC / / RV AA
17 Minimale eisen trailer, Minimum requirements trailer, Deze informatie niet gebruiken voor sterkteberekeningen This information is not suiteble for strenght calculations subject to change without notice 17 DO-E R40-SPEC / / RV AA
18 Standaard bedieningsvolgordes, standard control orders. subject to change without notice 18 DO-E R40-SPEC / / RV AA
19 Standaard bedieningsvolgordes, standard control orders. subject to change without notice 19 DO-E R40-SPEC / / RV AA
20 Hydraulisch schema, Hydraulic scheme R28SH101: KSS-01 &KSS-02 Hendel bediening, levercontrol subject to change without notice 20 DO-E R40-SPEC / / RV AA
288 Range 24-28 tm. Technical data. www.hiab.com. Min. 4685 Max. 20970
HIAB 288 Range 24-28 tm Min. 4685 Max. 20970 2842 Technical data www.hiab.com HIAB XS 288 Contents Introduction...3 Safety Regulations...4 Disclaimer...4 Explanation of Symbols...4 Explanation of Diagrams...4
E08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
Plunger Cylinder. 1 Description. 2 Technical data
Plunger Cylinder Piston rods ø 50 290 mm, construct to EN 81-2 / EN 81-50 Intended for personnel and freight elevators Series BZG For side-ram or central arrangement Seals with low frictions and war Piston
STOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85
THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS New Model Presentation In this presentation, we will outline the innovations and technical advances integrated into the new 90 tonne metre crane of the Amco
Product catalogue, tank cleaning systems
Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance
Extremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
2 Axis Solar Tracker / 12 Kw
2 Axis Solar Tracker / 12 Kw 4 Rows 14 metres 4 rows x 14 metres Quantity / Panel Type: 68 units Photovoltaic panel 1.600 x 790 mm Panel power / Total power: 165 W 11,2 Kw Total Surface: 94 m² Diameter
PLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
Electric Powered Forklift 1.5-2.0 ton
Electric Powered Forklift 1.5-2.0 ton E4 C4E150 C4E160-180 C4E160L-180L C4E200 www.bt-forklifts.com Electric Powered Forklift 1.5 ton Truck specifications C4E150 1.1 Manufacturer BT 1.2 Model C4E150 1.3
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
RH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
Highly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
EVAC ONLINEVAC TECHNICAL DATA 6547655 EVAC ONLINEVAC 16, 24 V DC. Required maintenance space 700 mm. Required maintenance space 200 mm 360 Ø13
Date: 9 Apr 202 Doc. 002967-6547655 6, 24 V DC Ø3 360 Required maintenance 990±0 960 40 040 20 890 350 (P/N 546664) 95±5 67±5 Vacuum sensor G /4 88±5 INLET DN40 943 Connection Frame: Steel S235 EN 0025
HBM NOBAS. www.hbm-nobas.de
www.hbm-nobas.de BG 240 T-4 (6 x 4) / BG 240 TA-4 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the most powerful graders worldwide.
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling
Petrol engines. Technical specifications 1.4 MPI/59kW 1.6 MPI/75 kw 1.6 MPI/75 kw Engine
ŠKODA Octavia Tour Petrol engines Technical specifications 1.4 MPI/59kW 1.6 MPI/ kw 1.6 MPI/ kw Engine Engine type petrol engine, in-line, liquid cooling system, DOHC, transverse in front petrol engine,
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
R310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE
Adress: FETIH AREA ADANA RINGROAD NO:113 ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE DESCREPTION UNITE OF MEASURE L3+2 L4+2 L5+2 L6 Maksimum hidrolik uzanma ( yatay) Maximum hydraulic outreach (Ver.) 14,45
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
ŠKODA Rapid Petrol engines
ŠKODA Rapid Petrol engines Technical specifications 1.2 MPI/55 kw 1.2 TSI/63 kw 1.2 TSI/77 kw 1.6 MPI/77 kw 1.6 MPI/77 kw (A) 1.4 TSI/90 kw (A) Engine Engine type turbocharged petrol petrol engine, in-line,
SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
Petrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395
![Petrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395](/thumbs/40/20801881.jpg "Petrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395")
ŠKODA Superb Combi Petrol engines Technical specifications 1.4 TSI/92 kw 1.4 TSI/110 kw ACT 1.4 TSI/110 kw ACT (A) 1.8 TSI/132 kw 1.8 TSI/132 kw (A) 2.0 TSI/162 kw (A) Engine Engine type Cylinders turbocharged
PRO-CLEAN. Technical Description. Specifications. Space-saving design with minimum heat loss (melamine resin insulation)
PRO-CLEAN Product description Specifications Technical Description Max. backup operating pressure Max. service water operating pressure 3 bar 6 bar Hot water connection " female thread* V4A (no..4) Cold
EXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units
왎 Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units Or tlinghaus Plates. Clutches. Brakes. Systems. Hydraulically actuated clutches and spring-applied brakes clutch/brake
MultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
DT 3000 SERIES. Specifications Double Stacker
DT 3000 SERIES Specifications Specifications Motors Performance Dimensions Tyres Weights General Information 1.1 Manufacturer Crown Equipment Corporation DT 3040-2.0 1.2 Model platform type without platform
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
exactly what is needed
JUNIOR For many years of low-maintenance drainpipe cleaning Of course you are familiar with the benefits of drainage in the field or in the greenhouse. Crops grow better and working conditions for preparing
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#03 OCT 2014 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#0 OCT 04 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET HTL 5 kw, 500 rpm 800 Nm 000 kg High production system Fixed
HYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
KESLA FORESTERI. Timber Loaders. Uplifting Innovations WWW.KESLA.COM
KESLA FORESTERI Upliing Innovations Timber Loaders WWW.KESLA.COM The unique V-base of the Kesla Foresteri boom section guarantees power and durability with one or two extensions. How do you prefer Adopt
Belt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
Operating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
Out - Serge 600 / 001061 Grijs Wit-Parelgrijs
Out - Serge 600 / 001061 Grijs Wit-Parelgrijs front: back: Breedtes 160 cm 190 cm 220 cm 250 cm 270 cm 320 cm TECHNISCHE SPECIFICATIE STANDAARD RESULTAAT compositie Fibreglass 42% - PVC 58% openness factor
Söll GlideLoc Aluminium Ladders. Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073
Söll GlideLoc Aluminium Ladders Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 7 Söll GlideLoc Aluminium ladders Y-spar Profile 52 x 51 mm With connector Mounting
SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
HEAVY FORMING AND CONSTRUCTION. Products of skill and workmanship EEW PICKHAN
HEAVY FORMING AND CONSTRUCTION Products of skill and workmanship EEW PICKHAN EEW Group possesses the following approvals: ISO 9001 API 5L API 5LC API 5LD API 2B ASME U STAMP ASME U2 STAMP ASME S STAMP
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
VOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
GUIDELINES FOR TESTING FRESH SELF-COMPACTING CONCRETE
Growth Contract No. GRD2-2000-30024 GUIDELINES FOR TESTING FRESH SELF-COMPACTING CONCRETE Principal author: G. DE SCHUTTER September 2005 European Research Project: MEASUREMENT OF PROPERTIES OF FRESH SELF-COMPACTING
Chapter 17 S-DIVISION TRUCKS
Chapter 17 S-DIVISION TRUCKS A. Classes 1. The classes are divided in three categories S-Trucks: a. Standard class b. Sports class c. Supersports class B. General rules truck classes a. The truck must
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
![That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance](/thumbs/30/13966838.jpg "That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance")
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
Pressure Relief Valves SPV, SPVF
Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
ALLROUNDER 420 C GOLDEN EDITION
Facts and figures ALLROUNDER C GOLDEN EDITION Distance between tie bars: x mm Clamping force: 1 kn Injection unit (acc. to EUROMAP): 29 www.arburg.com C GOLDEN EDITION Machine dimensions 85 33 125 195
Bælte-lifte Crawlerlifts
Bælte-lifte Crawlerlifts PrisListe 2015 TRACKED PLATFORMS - 2 - EASY LIFT R130 Max. working height: 12.20 m Max. working outreach (200 kg): 06.50 m Turntable rotation: 320 Aluminium basket 1100x700x1100
Jobson THE RIGHT CONTACT
THE RIGHT CONTACT Jobson Italia srl was set up in 1990. The following services are rendered 365 days a year, 24 hours a day: Stocking and trading of spare parts: Main Engines, auxiliary engines, pumps,
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
PALFINGER marine cranes are developed to meet a wide range of specific applications...
Marine Cranes PALFINGER marine cranes are developed to meet a wide range of specific applications... Foldable knuckle boom cranes (PC and PK). Compact all-rounders. Thanks to their sophisticated crane
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
MODEL 340. 15kg... 1500kg
MODEL 340 15kg... 1500kg Bending beam load cell Fully stainless steel divisions O.I.M.L. R60 class C Hermetically sealed, fully welded Protected IP 68 (EN 60529) Available in version (optional) Zone 0-1-2
VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
Drilling fleet. Capabilities. Agriculture. Water. Environment.
Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
1000/14.02 KOBSERT. Thread inserts for metals
1000/14.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical
BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt