Touch. LC Display. Engineering Leadership. Accessoires. Display. Specification. Version:

Transcription

1 Touch LC isplay Engineering Leadership isplay ccessoires Specification Version: ate:

2 EVEVISION ELECTONICS CO., LT. Product Specification For Touch Panel (KVPF-7B ) Model NO. VIM00-IN(oHS) EVISION 1 PPOVL FO SPECIFICTIONS ONLY PPOVL FO SPECIFICTIONS N SMPLE CUSTOME S.T.. PPOVE BY EVEVISION LCM & CENTE PPOVE BY CHECKE BY PEPE BY IECTO MNGE Mechanism Engineer Electronic Engineer EVEVISION ELECTONICS LT F,NO.186, JIN 1st., CHUNG HO CITY, TIPEI HSIEN, TIWN,.O.C TEL FX EVEVISION ELECTONICS(T.C) LT. 19 NO.19,CHIEN KUO O.T.E.P.Z TNTZE 27 TICHUNG HSIEN TIWN.O.C TEL FX EVEVISION ELECTONICS(B.V.I) LT. 9 NO.9,Tian Bao d.,ong Zong St.,ong Guan City Guang ong. China. TEL FX ( ) EVEVISION ELECTONICS(KUNSHN) LT. 8 NO.8,Chengbei d., Hi-Tech Industry Park, Yushan Town, Kunshan City, Jiangsu,China. TEL FX

3 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 ecord of evisions Module Numbering System pplication Features 6 General Specifications 7 bsolute Maximum atings 6 8 Electrical Characteristics 7 9 Block iagram 8 10 Input / Output Terminals Pin ssignment 9 11 Interface Timing Optical Characteristics 1 1 eliability Test 16 1 Standard of appearance inspection 17 1 Mechanical rawing Packaging 19

4 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 2. ecord of evisions ev. Comments Page ate 1 Preliminary Specification was first issued. ll 7/22 1

5

6 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE. pplication This improved projected capacitive touch (IPCT) panel module is applied to consumer and industrial applications which required touch input. This product is composed of two ITO glasses with control IC which mounts on FPC.. Features x 208 resolution. - I 2 C Interface. 6. General Specifications Item Specifications Unit Touch Panel Size. (iagonal) inch esolution ctive rea 71.1(H).1(V) mm View rea 7.(H).9(V) mm Transparency 8% - Surface Hardness 7 H - etect Points 10 - Interface I 2 C - Outline imension 76.(W) 6.(V) 1.() mm Weight 18.2 g ohs Compliance Evervision certifies this product to be in compliance with European Union irective 2002/9/EC on the restriction of certain hazardous substances in electrical and electronic equipment. -

7 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 6 7. bsolute Maximum atings 7.1bsolute atings of Environment Item Symbol Min. Value Max. Unit Storage Temperature T ST C (1) Operating mbient Temperature T OP C (1)(2) Note1: Ta 70 : 7%H max. Note2: Please refer to item of ELIBILITY. 7.2 Electrical bsolute atings Item Symbol Min. Value Max. Note (Ta=2±2 C, GN=0V) Unit igital Power Supply Voltage V V - Note

8 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 7 8. Electrical Characteristics (Ta=2±2 C) Item Symbol Value Min. Typ. Max. Unit Note Power Supply Voltage V.0..6 V - Power Supply Current I m (1) Input High Threshold Voltage V IH 0.7V - V V - Input Low Threshold Voltage V IL V V - Output High Threshold Voltage V OH 0.7V - - V - Output Low Threshold Voltage V OL V V - Power Consumption P L eport ate Hz - Note (1) This test condition is touched with 10 points.

9 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 8 9. Block iagram GN S SCL V /INT /ST FPC

10 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE Input / Output Terminals Pin ssignment Connector: CVILUX CF Pin No. Symbol I/O escription 1 GN I System ground. 2 V I +.V power supply. /ST I External reset signal, active low. /INT O S I/O I 2 C data signal. 6 SCL I I 2 C clock signal. 7 NC - Not Connection 8 NC - Not Connection 9 NC - Not Connection 10 GN I System ground. Interrupt signal, active low, asserted to request Host start a new transcation.

11 MOEL NO. PGE EVEVISION VIM00-IN SPEC&SMPLE Interface Timing 11.1 I2C ata Transfer Format Mnemonics escription S I 2 C Start or I 2 C estart [6:0] Slave ddress = 7 b W 1 b0: Write 1 b1: ead C CK P STOP: the indicate the end of a packet (if this bit is missing, S will indicate the end of the current packet and the beginning of the next packet) Write N bytes to I2C slave S W P Slave ddr ata ddress[x ] ata [X ] ata [X + N -1] Set ata ddress S W P S la v e d d r a ta d d re s s[x ] ead X bytes from I 2 C Slave S W P S lav e dd r ata [N ] ata [X + N -1 ]

12 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE I2C Timing Characteristics (Ta=2±2 C) Parameter Min Max Unit SCL frequency - 00 khz Bus free time between a STOP and STT condition.7 - s Hold time (repeated) STT condition.0 - s ata setup time 20 - ns Setup time for a repeated STT condition.7 - s Setup time for STOP condition.0 - s 11. Interrupt Trigger Mode 11. I2C Operating Mode egister Map ddress Name Bit 7 Bit 6 Bit Bit Bit Bit 2 Bit 1 Bit 0 Host ccess Op,00h EVICE_MOE evice W Mode[2:0] Op,01h eserved Op,02h T_STTUS Number of touch points[:0] Op,0h TOUCH1_YH 1 st Event 1 st Touch Flag Y Position[11:8] Op,0h TOUCH1_YL 1 st Touch Y Position[7:0] Op,0h TOUCH1_XH 1 st Touch I[:0] 1 st Touch X Position[11:8] Op,06h TOUCH1_XL 1 st Touch X Position[7:0] Op,07h eserved Op,08h eserved

13 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 12 Op,09h TOUCH2_YH 2 nd Event 2 nd Touch Flag Y Position[11:8] Op,0h TOUCH2_YL 2 nd touch Y Position[7:0] Op,0Bh TOUCH2_XH 2 nd Touch I[:0] 2 nd Touch X Position[11:8] Op,0Ch TOUCH2_XL 2 nd Touch X Position[7:0] Op,0h eserved Op,0Eh eserved Op,0Fh TOUCH_YH rd Event rd Touch Flag Y Position[11:8] Op,10h TOUCH_YL rd Touch Y Position[7:0] Op,11h TOUCH_XH rd Touch I[:0] rd Touch X Position[11:8] Op,12h TOUCH_XL rd Touch X Position[7:0] Op,1h eserved Op,1h eserved Op,1h TOUCH_YH th Event th Touch Flag Y Position[11:8] Op,16h TOUCH_YL th Touch Y Position[7:0] Op,17h TOUCH_XH th Touch I[:0] th Touch X Position[11:8] Op,18h TOUCH_XL th Touch X Position[7:0] Op,19h eserved Op,1h eserved Op,1Bh TOUCH_YH th Event th Touch Flag Y Position[11:8] Op,1Ch TOUCH_YL th Touch Y Position[7:0] Op,1h TOUCH_XH th Touch I[:0] th Touch X Position[11:8] Op,1Eh TOUCH_XL th Touch X Position[7:0] Op,1Fh eserved Op,20h eserved Op,21h TOUCH6_YH 6 th Event 6 th Touch Flag Y Position[11:8] Op,22h TOUCH6_YL 6 th Touch Y Position[7:0] Op,2h TOUCH6_XH 6 th Touch I[:0] 6 th Touch X Position[11:8] Op,2h TOUCH6_XL 6 th Touch X Position[7:0]

14 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE 1 Op,2h eserved Op,26h eserved Op,27h TOUCH7_YH 7 th Event 7 th Touch Flag Y Position[11:8] Op,28h TOUCH7_YL 7 th Touch Y Position[7:0] Op,29h TOUCH7_XH 7 th Touch I[:0] 7 th Touch X Position[11:8] Op,2h TOUCH7_XL 7 th Touch X Position[7:0] Op,2Bh eserved Op,2Ch eserved Op,2h TOUCH8_YH 8 th Event 8 th Touch Flag Y Position[11:8] Op,2Eh TOUCH8_YL 8 th Touch Y Position[7:0] Op,2Fh TOUCH8_XH 8 th Touch I[:0] 8 th Touch X Position[11:8] Op,0h TOUCH8_XL 8 th Touch X Position[7:0] Op,1h eserved Op,2h eserved Op,h TOUCH9_YH 9 th Event 9 th Touch Flag Y Position[11:8] Op,h TOUCH9_YL 9 th Touch Y Position[7:0] Op,h TOUCH9_XH 9 th Touch I[:0] 9 th Touch X Position[11:8] Op,6h TOUCH9_XL 9 th Touch X Position[7:0] Op,7h eserved Op,8h eserved Op,9h TOUCH10_YH 10 th Event 10 th Touch Flag Y Position[11:8] Op,h TOUCH10_YL 10 th Touch Y Position[7:0] Op,Bh TOUCH10_XH 10 th Touch I[:0] 10 th Touch X Position[11:8] Op,Ch TOUCH10_XL 10 th Touch X Position[7:0] Op,h eserved Op,Eh eserved

15 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE EVICE_MOE This register is the device mode register, configure it to determine the current mode of the chip. ddress Bit ddress egister Name escription Op,00h 6: evice Mode [2:0] 000b 001b (eserved) 100b (eserved) Normal operating Mode System Information Mode Test Mode read raw data T_STTUS This register is the Touch ata status register. ddress Bit ddress egister Name escription Op,02h :0 Number of touch points[:0] How many points detected is valid TOUCHn_YH (n:1-10) This register describes MSB of the Y coordinate of the nth touch point and the corresponding event flag. ddress Bit ddress egister Name escription Op,0h ~ Op,9h 7:6 Event Flag 00b: Put own 01b: Put Up 10b: Contact 11b: No event : eserved :0 Touch Y Position [11:8] MSB of Touch Y Position in pixels

16 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE TOUCHn_YL (n:1-10) This register describes LSB of the Y coordinate of the nth touch point. ddress Bit ddress egister Name escription Op,0h ~ Op,h 7:0 Touch Y Position [7:0] LSB of the Touch Y Position in pixels 11.. TOUCHn_XH (n:1-10) This register describes MSB of the X coordinate of the nth touch point and corresponding touch I. ddress Bit ddress egister Name escription Op,0h ~ Op,Bh 7: Touch I[:0] Touch I of Touch Point :0 Touch X Position [11:8] MSB of Touch X Position in pixels TOUCHn_XL (n:1-10) This register describes LSB of the X coordinate of the nth touch point. ddress Bit ddress egister Name escription Op,06h ~ Op,Ch 7:0 Touch X Position [7:0] LSB of The Touch X Position in pixels 12. Optical Characteristics Item Specifications Transparency 8% HZE 1.%

17 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE eliability Test No. Test Items Test Condition emark 1 High Temperature Storage Test T a = hours (1),(2) 2 Low Temperature Storage Test T a = hours (1),(2) 6 Note: High Temperature Operation Test Low Temperature Operation Test High Temperature and High Humidity Operation Test Thermal Shock Test (non-operating) T a = hours (1),(2) T a = hours (1),(2) T a =60 90%H 20 hours (Without dewing) (1),(2) -20 (0min) ~ 70 (0min), 10 cycles (1),(2) (1) In the standard condition, there shall be no practical problem that may affect the display function. fter the reliability test, the product only guarantees operation, but don t guarantee all of the cosmetic specification. (2)Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature. 1.1 rop test Test Item Specifications Condition rop test Weight:0g iameter:2mm Steel ball High:0cm rop on the center of touch panel module and can t break(one time)

18 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE Standard of appearance inspection Circular efects Linear efects Scratch ir Bubble Crack (1) Circular efects =(L+W)/2 iameter(mm) Spec 0.2 No quantity limit Max defect 0. eject (2) Linear efects L Length Width cceptable 6.0 L 0.06 W ccept L 6.0 W 0.06 eject ()Scratch Length Width cceptable 12.0 L 0.06 W ccept L 12.0 W 0.06 eject The Min distance of defects must be above.0mm. () ir Bubble iameter(mm) Spec 0.2 No quantity limit Max defect The Min distance of defects must be above.0mm. ()Crack eject

19 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE Mechanical rawing

20 EVEVISION MOEL NO. PGE VIM00-IN SPEC&SMPLE Packaging

21 MSC Technologies GmbH Industriestraße 16 Phone Stutensee MSC Technologies Systems GmbH Munzinger Straße Phone Freiburg im Breisgau Germany CHEN Pascalstr. 21 Phone achen BELIN Tempelhofer Ufer 7 Phone Berlin ÜSSELOF Max-Planck-Str.1a-c Phone Erkrath HNNOVE Gaußstraße 10 Phone Lehrte JEN udolstädter Str. 68a Phone Jena KOBLENZ Heerstraße 27-1 Phone Vallendar MUCH Torfstecherring 6 Phone Ludwigshafen MÜNCHEN m Loferfeld 0a Phone München NEUFHN Zeppelinstr. 1a Phone Europe USTI (also responsible for Slovenia) redstrasse 1 Phone + (226) Leobersdorf SWITZELN Industriestr. 2 Phone CH Volketswil BENELUX COUNTIES Stadionstraat 2, 6th fl Phone NL - 81 NG BE CZECH EPUBLIC (also responsible for Poland and Slovakia) Nádražní 269/10 Phone CZ Blansko HUNGY Budafoki út 91-9 West Irodahaz Phone H Budapest TUKEY Inonu Cd. Seylan Is Merkezi 8/6 Kozyatagi Phone T - 76 Istanbul OMNI Construdava Business Center S os. Pipera-Tunari c Voluntari Ilfov (Bucharest) Phone SPIN Calle Chile 10, 2nd Planta, Oficina 222 Phone ES Las Matas, Madrid Fermín Calbetón Nº Planta Phone ES Eibar (Guipúzcoa/Basque) 87 Neufahrn bei Freising NÜNBEG Lina-mmon-Str.19 Phone Nürnberg STUTTGT Gutenbergstraße 1 Phone Leinfelden-Echterdingen WIESBEN Borsigstraße 6 Phone Wiesbaden [email protected] MSC Technologies. ll rights reserved. lthough great care has been taken in preparing this printed matter, MSC can not be held responsible for any errors or omissions. ll information in here is subject to change without notice. ll hardware and software names used are trade names and/or trademarks of the respective manufacturer.