RECENT RESEARCH IN COMPUTATIONAL FLUID MECHANICS

Size: px
Start display at page:

Download "RECENT RESEARCH IN COMPUTATIONAL FLUID MECHANICS"

Transcription

1 RECENT RESEARCH IN COMPUTATIONAL FLUID MECHANICS Dr. Nor Azwadi bin Che Sidik Faculty of Mechanical Engineering Universiti Teknologi Malaysia 1

2 OBJECTIVE 1. To inform current research topics in the field of Computational Fluid Mechanics 2.To promote research topics for Undergraduate Projects (UGP), Master Project/Master Research or PhD research 2

3 RESEARCH?? The systematic investigation into and study of materials and sources in order to establish facts and reach new conclusions. 3

4 WHY RESEARCH MATTERS 1 Graduation requirement 2 Platform to demonstrate student s creativity and apply knowledge 3 Contribute to new knowledge 3 To disseminate knowledge 4 To get money/claim (publication incentives) 5 Etc 4

5 SELECTION OF RESEARCH TOPIC When considering topics for a workable research problem, ask the following questions: Do I posses the skills necessary to complete this study? Do I have access to the tools, lab, and equipment to complete this project? Do I have the time and money necessary to complete this project? Do I have the resources necessary to obtain sufficient data? Do I have access to a professional in that field who will be willing and able to advise me in the research process? 5

6 SELECTION OF RESEARCH TOPIC Choose a research topic that interests you. Then. *Find a study that has already been done and replicate it using new definitions of some of the variables in the study (UG). -or*find a study that has already been done and replicate it using additional moderator or control variables (UG/PG(t)) -or*find an existing study and develop a different way to test the hypothesis (PG(t/r)) -or6

7 SELECTION OF RESEARCH TOPIC *Follow an author s suggestions for further research needed usually found at the end of an article (PG(r)) -or*contact the author of an interesting study using the internet for ideas for further study (PG(r)) -or*choose a problem, analyze it, and invent a completely new study (Ph.D) 7

8 CRITERIA FOR CHOOSING A SUPERVISOR Freedom to work (FW) - The supervisor is open to ideas and is flexible about adopting alternative approaches Time conscious (TC) - The supervisor is conscious about time taken for completion and is generally willing to work towards it. Job prospect (JP) - The supervisor ability to help the candidate in obtaining a suitable job after completion of dissertation Convergence of interest (CI) - The matching of interest of the student and the supervisor Reputation/Subject knowledge/publications (RP) - The reputation of the supervisor in his or her field. 8

9 CRITERIA FOR CHOOSING A SUPERVISOR Personal relationship with the professor (PR) - Cordial and understanding relationship with the supervisor Social networks (SN) - The supervisor social network and relationship with other professors in the institute and outside Number of thesis guided (TG) - Number of thesis guided by the supervisor, the more the better Commitment and involvement (IN) - Supervisor enthusiasm in guiding the thesis, emotional investment 9

10 CURRENT RESEARCH 1. Solution to the lattice Boltzmann equation 2. Solution to the Navier-Stokes Equation 3. Application of Numerical Software 10

11 CURRENT RESEARCH 1. Solution to the lattice Boltzmann equation Lattice Boltzmann equation Evolution equation of particle distribution function (translation and collision). 11

12 CURRENT RESEARCH Translation Collision Equilibrium function 12

13 CURRENT RESEARCH Fluid flow parameters Density Velocity Skill required MATLAB or Fortran ex: translation 13

14 CURRENT RESEARCH ex: collision ex: density and velocity 14

15 Lattice Boltzmann for turbulent flow Leila J., Ph.D Current Study Benchmark Re=1000 Re=10000 Re=20000 Leila Jahanshaloo, Emad Kermani and Nor Azwadi Che Sidik, A review on application of lattice Boltzmann method for turbulent flow simulation, Numerical 15 Heat Transfer, Part A Application, Accepted for publication. (IF 2.492).

16 Lattice Boltzmann method for turbulent flow in rotating channel Basha M., Ph.D Nor Azwadi Che Sidik, M. Basha, Regularized lattice Boltzmann simulation of laminar mixed convection in entrance region of 2D channels, Numerical Heat Transfer, Part A Application, Vol. 63, n. 11, , (IF 2.492). 16

17 Lattice Boltzmann method for particulate flow, Leila J., Ph.D., Aman AK., Ph.D., Akmal H., Master 17 Few papers submitted to high impact journals

18 Lattice Boltzmann method for nanofluid 18

19 Lattice Boltzmann method for nanofluid Nor Azwadi Che Sidik, Arman Safdari, Comments on: Lattice Boltzmann Simulation of Alumina-water Nanofluid in a Square Cavity by Yurong He, Cong Qi, Yanwei Hu, Bin Qin, Fengchen Li and Yulog Ding (Nanoscale Research Letters 2011, 6:184), Nanoscale Research Letters, Vol. 7, pp , 2012 (IF 2.726). Nor Azwadi Che Sidik, Maysam Khakbaz, Leila Jahanshaloo, Syahrullail Samion and Amer Nordin Darus, Simulation of Forced Convection in a Channel with Nanofluid by the Lattice Boltzmann Method, Nanoscale 19 Research Letters, 8, 178, 2013 (IF 2.726).

20 Some improvements of the lattice Boltzmann method Shervin Sharafatmandjour, Nor Azwadi Che Sidik, Sabetghadam, A least squared based immersed boundary approach for the complex boundaries in lattice Boltzmann Method, Numerical Heat Transfer Part B- Fundamental, Accepted for publication. (IF 2.054) Shervin Sharafatmandjoor, Nor Azwadi Che Sidik, F. Sabetghadam, Analysis of applicability of the lattice Boltzmann method in targeting a chaotic flame front model, Numerical Heat Transfer, Part A Application, Accepted for publication. (IF 2.492). Nor Azwadi Che Sidik, M. Zeinali, A. Safdari and A. Kazemi, Adaptive Network Based Fuzzy Inference System Analysis to predict the temperature and flow fields in Lid-Driven Cavity, Numerical Heat Transfer, Part A Application, Vol. 63, n. 12, , (IF 2.492). 20

21 CURRENT RESEARCH 21

22 CURRENT RESEARCH 2. Solution to the Navier-Stokes equation Navier-Stokes equation governing equation for fluid flow 22

23 CURRENT RESEARCH Discretisation using finite different method 23

24 CURRENT RESEARCH Required skill: Matlab/fortran 24

25 High order solution scheme of Navier-Stokes equation (CIP), Mehran, Master Mehran Salehi, Nor Azwadi Che Sidik, Prediction of flow characteristics25in stenotic artery using CIP Scheme International Journal of Materials and Mechanical Engineering, 7,

26 Pian and Rajab, Ph.D Nor Azwadi Che Sidik, Mehran Salehi, Eulerian-Lagrangian numerical scheme for contaminant removal from different cavity shapes, The Arabian Journal for 26 Science and Engineering, Accepted for publication. (IF 0.243)

27 CURRENT RESEARCH 3. Application of numerical software FLUENT software 27

28 CURRENT RESEARCH Required skill Familiar with the software 28

29 Film cooling in combustor simulator, Ehsan, Ph.D Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, Thermodynamics analysis of flow field at the end of combustor simulator 29 International Journal of Heat and Mass Transfer, 61, , (IF 2.407)

30 Film cooling in combustor simulator, Ehsan, Ph.D Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, Thermodynamics analysis of flow field at the end of combustor simulator 30 International Journal of Heat and Mass Transfer, 61, , (IF 2.407)

31 Temperature Distribution Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, Thermodynamics analysis of flow field at the end of combustor simulator 31 International Journal of Heat and Mass Transfer, 61, , (IF 2.407)

32 CURRENT RESEARCH Contaminant flow in urban street canyon, Afiq, Ph.D 32

33 33

34 Contaminant flow in urban street canyon Afiq Witri, Nor Azwadi Che Sidik, Khaled Saqr and Salim Mohamad Salim, A review on the flow structure and pollutant dispersion in urban street canyon SIMULATION, Accepted for publication with minor correction. (IF 0.793) 34

35 Fish Fin morphology Case 8 35

36 RESEARCHER PROFILE Case 8 36

37 RESEARCHER PROFILE 37

38 RESEARCHER PROFILE 38

39 CFD LAB 39

40 40

41 41

42 CONTACT US Dr. Nor Azwadi bin Che Sidik E07-level 2 (CFD lab) Tel: [email protected] Web: 42

43 WEBSITE 43

TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW

TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW Rajesh Khatri 1, 1 M.Tech Scholar, Department of Mechanical Engineering, S.A.T.I., vidisha

More information

Effect of Aspect Ratio on Laminar Natural Convection in Partially Heated Enclosure

Effect of Aspect Ratio on Laminar Natural Convection in Partially Heated Enclosure Universal Journal of Mechanical Engineering (1): 8-33, 014 DOI: 10.13189/ujme.014.00104 http://www.hrpub.org Effect of Aspect Ratio on Laminar Natural Convection in Partially Heated Enclosure Alireza Falahat

More information

NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES

NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: [email protected] Research field: Statics and Dynamics Fluids mechanics

More information

Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering

Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Intended Audience: Main Campus Students Distance (online students) Both Purpose:

More information

The Effects of Row Trench Holes with Alignment Angle of +60 Degrees on Film Cooling Effectiveness at Low Blowing Ratios

The Effects of Row Trench Holes with Alignment Angle of +60 Degrees on Film Cooling Effectiveness at Low Blowing Ratios The Effects of Row Trench Holes with Alignment Angle of +60 Degrees on Film Cooling Effectiveness at Low Blowing Ratios E. Kianpour *,1,a and I. Golshokouh 2 1 Faculty of Engineering, Islamic Azad University

More information

HEAT TRANSFER IM0245 3 LECTURE HOURS PER WEEK THERMODYNAMICS - IM0237 2014_1

HEAT TRANSFER IM0245 3 LECTURE HOURS PER WEEK THERMODYNAMICS - IM0237 2014_1 COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE HEAT TRANSFER IM05 LECTURE HOURS PER WEEK 8 HOURS CLASSROOM ON 6 WEEKS, HOURS LABORATORY, HOURS OF INDEPENDENT WORK THERMODYNAMICS

More information

Ravi Kumar Singh*, K. B. Sahu**, Thakur Debasis Mishra***

Ravi Kumar Singh*, K. B. Sahu**, Thakur Debasis Mishra*** Ravi Kumar Singh, K. B. Sahu, Thakur Debasis Mishra / International Journal of Engineering Research and Applications (IJERA) ISSN: 48-96 www.ijera.com Vol. 3, Issue 3, May-Jun 3, pp.766-77 Analysis of

More information

Purdue University - School of Mechanical Engineering. Objective: Study and predict fluid dynamics of a bluff body stabilized flame configuration.

Purdue University - School of Mechanical Engineering. Objective: Study and predict fluid dynamics of a bluff body stabilized flame configuration. Extinction Dynamics of Bluff Body Stabilized Flames Investigator: Steven Frankel Graduate Students: Travis Fisher and John Roach Sponsor: Air Force Research Laboratory and Creare, Inc. Objective: Study

More information

MAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL

MAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL MAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL Sanjay Kumar Sharma 1 and Vikas Sharma 2 1,2 Assistant Professor, Department of Mechanical Engineering, Gyan Vihar University, Jaipur, Rajasthan,

More information

Curriculum Vitae. George Breyiannis. Mechanical Engineer, PhD

Curriculum Vitae. George Breyiannis. Mechanical Engineer, PhD Curriculum Vitae George Breyiannis Mechanical Engineer, PhD Sep 2006 Personal Nationality: Greek/Australian Place/Date of birth: Melbourne Australia, March 13, 1968. Marital status: Married, two children.

More information

Model of a flow in intersecting microchannels. Denis Semyonov

Model of a flow in intersecting microchannels. Denis Semyonov Model of a flow in intersecting microchannels Denis Semyonov LUT 2012 Content Objectives Motivation Model implementation Simulation Results Conclusion Objectives A flow and a reaction model is required

More information

Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements

Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements Total: 36 credits Curriculum Structure: A. Thesis 36 credits

More information

Computational Engineering Programs at the University of Erlangen-Nuremberg

Computational Engineering Programs at the University of Erlangen-Nuremberg Computational Engineering Programs at the University of Erlangen-Nuremberg Ulrich Ruede Lehrstuhl für Simulation, Institut für Informatik Universität Erlangen http://www10.informatik.uni-erlangen.de/ ruede

More information

INCORPORATING CFD INTO THE UNDERGRADUATE MECHANICAL ENGINEERING PROGRAMME AT THE UNIVERSITY OF MANITOBA

INCORPORATING CFD INTO THE UNDERGRADUATE MECHANICAL ENGINEERING PROGRAMME AT THE UNIVERSITY OF MANITOBA INCORPORATING CFD INTO THE UNDERGRADUATE MECHANICAL ENGINEERING PROGRAMME AT THE UNIVERSITY OF MANITOBA Scott J. Ormiston SJ [email protected] Associate Professor, Dept. of Mechanical and Industrial

More information

HEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi

HEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi HEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi 2 Rajesh Dudi 1 Scholar and 2 Assistant Professor,Department of Mechanical Engineering, OITM, Hisar (Haryana)

More information

MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi

MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi Time and Venue Course Coordinator: Dr. Prabal Talukdar Room No: III, 357

More information

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry

More information

Part IV. Conclusions

Part IV. Conclusions Part IV Conclusions 189 Chapter 9 Conclusions and Future Work CFD studies of premixed laminar and turbulent combustion dynamics have been conducted. These studies were aimed at explaining physical phenomena

More information

EXPERIMENTAL ANALYSIS OF HEAT TRANSFER ENHANCEMENT IN A CIRCULAR TUBE WITH DIFFERENT TWIST RATIO OF TWISTED TAPE INSERTS

EXPERIMENTAL ANALYSIS OF HEAT TRANSFER ENHANCEMENT IN A CIRCULAR TUBE WITH DIFFERENT TWIST RATIO OF TWISTED TAPE INSERTS INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY Vol.33 (2015), No.3, pp.158-162 http://dx.doi.org/10.18280/ijht.330324 EXPERIMENTAL ANALYSIS OF HEAT TRANSFER ENHANCEMENT IN A CIRCULAR TUBE WITH DIFFERENT

More information

Introduction to Computational Fluid Dynamics (CFD) for Combustion. www.reaction-eng.com (801) 364-6925

Introduction to Computational Fluid Dynamics (CFD) for Combustion. www.reaction-eng.com (801) 364-6925 Introduction to Computational Fluid Dynamics (CFD) for Combustion www.reaction-eng.com (801) 364-6925 What is CFD? CFD stands for Computational Fluid Dynamics CFD uses computers to represent (or model)

More information

Abaqus/CFD Sample Problems. Abaqus 6.10

Abaqus/CFD Sample Problems. Abaqus 6.10 Abaqus/CFD Sample Problems Abaqus 6.10 Contents 1. Oscillatory Laminar Plane Poiseuille Flow 2. Flow in Shear Driven Cavities 3. Buoyancy Driven Flow in Cavities 4. Turbulent Flow in a Rectangular Channel

More information

International Master of Science Degree Program

International Master of Science Degree Program International Master of Science Degree Program Sustainable Energy Systems Courses in English http://www.sirius.luth.se/energy/ International Master of Science Degree Program taught in English at Luleå

More information

CATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees:

CATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees: CATALOG CHANGES - F13 Ocean and Mechanical Engineering Department: The following changes are necessary to update the catalog. The first change is to include the combined BSME to MS degree program in the

More information

Assoc. Prof. Dr. Fatih SELİMEFENDİGİL

Assoc. Prof. Dr. Fatih SELİMEFENDİGİL Assoc. Prof. Dr. Fatih SELİMEFENDİGİL EDUCATION Degree University Department / Program Years Istanbul Technical 2001- Undergrad Mechanical Eng. University 200 M.S. Technical University of Mechanical Eng.

More information

CFD Grows Up! Martin W. Liddament Ventilation, Energy and Environmental Technology (VEETECH Ltd) What is Computational Fluid Dynamics?

CFD Grows Up! Martin W. Liddament Ventilation, Energy and Environmental Technology (VEETECH Ltd) What is Computational Fluid Dynamics? CIBSE/ASHRAE Meeting CFD Grows Up! Martin W. Liddament Ventilation, Energy and Environmental Technology (VEETECH Ltd) 10 th December 2003 What is Computational Fluid Dynamics? CFD is a numerical means

More information

Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College

Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College E UROPEAN CURRICULUM VITAE FORMAT PERSONAL INFORMATION Name ARSLAN Kamil (Asst. Prof. Dr.) Address Çankırı Karatekin University, Technical and Business College, 18200, Cankiri, TURKEY Telephone +90 376

More information

Benchmarking COMSOL Multiphysics 3.5a CFD problems

Benchmarking COMSOL Multiphysics 3.5a CFD problems Presented at the COMSOL Conference 2009 Boston Benchmarking COMSOL Multiphysics 3.5a CFD problems Darrell W. Pepper Xiuling Wang* Nevada Center for Advanced Computational Methods University of Nevada Las

More information

P. V A D A S Z J O U R N A L P U B L IC A T IO N S ( 1 9 8 3-2 0 0 7 )

P. V A D A S Z J O U R N A L P U B L IC A T IO N S ( 1 9 8 3-2 0 0 7 ) P. V A D A S Z J O U R N A L P U B L IC A T IO N S ( 1 9 8 3-2 0 0 7 ) 1. VADASZ, P., WEINER, D., ZVIRIN, Y.: A Halothermal Simulation of the Dead Sea for Application to Solar Energy Projects, ASME Journal

More information

ME6130 An introduction to CFD 1-1

ME6130 An introduction to CFD 1-1 ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically

More information

Free Convection Film Flows and Heat Transfer

Free Convection Film Flows and Heat Transfer Deyi Shang Free Convection Film Flows and Heat Transfer With 109 Figures and 69 Tables < J Springer Contents 1 Introduction 1 1.1 Scope 1 1.2 Application Backgrounds 1 1.3 Previous Developments 2 1.3.1

More information

CFD Simulation of Subcooled Flow Boiling using OpenFOAM

CFD Simulation of Subcooled Flow Boiling using OpenFOAM Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet CFD

More information

How To Run A Cdef Simulation

How To Run A Cdef Simulation Simple CFD Simulations and Visualisation using OpenFOAM and ParaView Sachiko Arvelius, PhD Purpose of this presentation To show my competence in CFD (Computational Fluid Dynamics) simulation and visualisation

More information

Keywords: Heat transfer enhancement; staggered arrangement; Triangular Prism, Reynolds Number. 1. Introduction

Keywords: Heat transfer enhancement; staggered arrangement; Triangular Prism, Reynolds Number. 1. Introduction Heat transfer augmentation in rectangular channel using four triangular prisms arrange in staggered manner Manoj Kumar 1, Sunil Dhingra 2, Gurjeet Singh 3 1 Student, 2,3 Assistant Professor 1.2 Department

More information

Lecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics

Lecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics Lecture 6 - Boundary Conditions Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Outline Overview. Inlet and outlet boundaries.

More information

CFD Application on Food Industry; Energy Saving on the Bread Oven

CFD Application on Food Industry; Energy Saving on the Bread Oven Middle-East Journal of Scientific Research 13 (8): 1095-1100, 2013 ISSN 1990-9233 IDOSI Publications, 2013 DOI: 10.5829/idosi.mejsr.2013.13.8.548 CFD Application on Food Industry; Energy Saving on the

More information

Differential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation

Differential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation Differential Relations for Fluid Flow In this approach, we apply our four basic conservation laws to an infinitesimally small control volume. The differential approach provides point by point details of

More information

Topic 3b: Kinetic Theory

Topic 3b: Kinetic Theory Topic 3b: Kinetic Theory What is temperature? We have developed some statistical language to simplify describing measurements on physical systems. When we measure the temperature of a system, what underlying

More information

Analysis of Mobile Phone Reliability Based on Active Disassembly Using Smart Materials *

Analysis of Mobile Phone Reliability Based on Active Disassembly Using Smart Materials * Journal of Surface Engineered Materials and Advanced Technology, 2011, 1, 80-87 doi:10.4236/jsemat.2011.12012 Published Online July 2011 (http://www.scirp.org/journal/jsemat) Analysis of Mobile Phone Reliability

More information

Numerical Study of Heat Transfer and Laminar Flow over a Backward Facing Step with and without Obstacle

Numerical Study of Heat Transfer and Laminar Flow over a Backward Facing Step with and without Obstacle Numerical Study of Heat Transfer and Laminar Flow over a Backward Facing Step with and without Obstacle Hussein Togun, Tuqa Abdulrazzaq, S. N. Kazi, A. Badarudin, M. K. A. Ariffin, M. N. M. Zubir Abstract

More information

Computational Fluid Dynamics Research Projects at Cenaero (2011)

Computational Fluid Dynamics Research Projects at Cenaero (2011) Computational Fluid Dynamics Research Projects at Cenaero (2011) Cenaero (www.cenaero.be) is an applied research center focused on the development of advanced simulation technologies for aeronautics. Located

More information

CFD Based Air Flow and Contamination Modeling of Subway Stations

CFD Based Air Flow and Contamination Modeling of Subway Stations CFD Based Air Flow and Contamination Modeling of Subway Stations Greg Byrne Center for Nonlinear Science, Georgia Institute of Technology Fernando Camelli Center for Computational Fluid Dynamics, George

More information

Self Financed One Week Training

Self Financed One Week Training Self Financed One Week Training On Computational Fluid Dynamics (CFD) with OpenFOAM December 14 20, 2015 (Basic Training: 3days, Advanced Training: 5days and Programmer Training: 7days) Organized by Department

More information

Dr.A.K.Shaik Dawood. N.V.Kamalesh. Department of Mechanical Engineering, Associate Professor, Karpagam University, Coimbatore 641202, India.

Dr.A.K.Shaik Dawood. N.V.Kamalesh. Department of Mechanical Engineering, Associate Professor, Karpagam University, Coimbatore 641202, India. CFD Analysis of cooling channels in built-in motorized high speed spindle K.MadhanMuthuGanesh Department of Mechanical Engineering, Research scholar, PSG College of Technology, Coimbatore 641107, India.

More information

LBM BASED FLOW SIMULATION USING GPU COMPUTING PROCESSOR

LBM BASED FLOW SIMULATION USING GPU COMPUTING PROCESSOR LBM BASED FLOW SIMULATION USING GPU COMPUTING PROCESSOR Frédéric Kuznik, frederic.kuznik@insa lyon.fr 1 Framework Introduction Hardware architecture CUDA overview Implementation details A simple case:

More information

Natural convection in a room with two opposite heated vertical walls

Natural convection in a room with two opposite heated vertical walls INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENT Volume 6, Issue 1, 2015 pp.81-86 Journal homepage: www.ijee.ieefoundation.org Natural convection in a room with two opposite heated vertical walls Ameer

More information

Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM

Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM CSDMS 2013 Meeting Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM Xiaofeng Liu, Ph.D., P.E. Assistant Professor Department of Civil and Environmental Engineering University of Texas

More information

Pre-requisites 2012-2013

Pre-requisites 2012-2013 Pre-requisites 2012-2013 Engineering Computation The student should be familiar with basic tools in Mathematics and Physics as learned at the High School level and in the first year of Engineering Schools.

More information

Optimization of electronic devices placement on printed circuit board

Optimization of electronic devices placement on printed circuit board Optimization of electronic devices placement on printed circuit board Abstract by M. Felczak, T.Wajman and B. Więcek Technical University of Łódź, Wólczańska 211/215, 90-924 Łódź, Poland Power densities

More information

CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER

CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)

More information

Distance Learning Program

Distance Learning Program Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance

More information

FLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS - CB0235 2014_1

FLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS - CB0235 2014_1 COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE FLUID MECHANICS IM0235 3 LECTURE HOURS PER WEEK 48 HOURS CLASSROOM ON 16 WEEKS, 32 HOURS LABORATORY, 112 HOURS OF INDEPENDENT

More information

International Journal of ChemTech Research CODEN (USA): IJCRGG ISSN: 0974-4290 Vol.7, No.6, pp 2580-2587, 2014-2015

International Journal of ChemTech Research CODEN (USA): IJCRGG ISSN: 0974-4290 Vol.7, No.6, pp 2580-2587, 2014-2015 International Journal of ChemTech Research CODEN (USA): IJCRGG ISSN: 0974-4290 Vol.7, No.6, pp 2580-2587, 2014-2015 Performance Analysis of Heat Transfer and Effectiveness on Laminar Flow with Effect of

More information

Numerical Investigation of Heat Transfer Characteristics in A Square Duct with Internal RIBS

Numerical Investigation of Heat Transfer Characteristics in A Square Duct with Internal RIBS merical Investigation of Heat Transfer Characteristics in A Square Duct with Internal RIBS Abhilash Kumar 1, R. SaravanaSathiyaPrabhahar 2 Mepco Schlenk Engineering College, Sivakasi, Tamilnadu India 1,

More information

Essam E. Khalil [email protected]

Essam E. Khalil khalile1@asme.org AIR-CONDITIONING SYSTEMS DEVELOPMENTS IN HOSPITALS: COMFORT, AIR QUALITY, AND ENERGY UTILIZATION Essam E. Khalil [email protected] PROFESSOR OF MECHANICAL ENGINEERING, CAIRO UNIVERSITY, EGYPT Abstract

More information

HEAT AND MASS TRANSFER

HEAT AND MASS TRANSFER MEL242 HEAT AND MASS TRANSFER Prabal Talukdar Associate Professor Department of Mechanical Engineering g IIT Delhi [email protected] MECH/IITD Course Coordinator: Dr. Prabal Talukdar Room No: III,

More information

Experimental Study of Free Convection Heat Transfer From Array Of Vertical Tubes At Different Inclinations

Experimental Study of Free Convection Heat Transfer From Array Of Vertical Tubes At Different Inclinations Experimental Study of Free Convection Heat Transfer From Array Of Vertical Tubes At Different Inclinations A.Satyanarayana.Reddy 1, Suresh Akella 2, AMK. Prasad 3 1 Associate professor, Mechanical Engineering

More information

Heat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati

Heat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati Heat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati Module No. # 04 Convective Heat Transfer Lecture No. # 03 Heat Transfer Correlation

More information

STEADY STATE VORTEX STRUCTURE OF LID DRIVEN FLOW INSIDE SHALLOW SEMI ELLIPSE CAVITY

STEADY STATE VORTEX STRUCTURE OF LID DRIVEN FLOW INSIDE SHALLOW SEMI ELLIPSE CAVITY Journal of Mechanical Engineering and Sciences (JMES) e-issn: 2231-8380; Volume 2, pp. 206-216, June 2012 FKM, Universiti Malaysia Pahang STEADY STATE VORTEX STRUCTURE OF LID DRIVEN FLOW INSIDE SHALLOW

More information

Graduate Courses in Mechanical Engineering

Graduate Courses in Mechanical Engineering Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation

More information

Basic Principles in Microfluidics

Basic Principles in Microfluidics Basic Principles in Microfluidics 1 Newton s Second Law for Fluidics Newton s 2 nd Law (F= ma) : Time rate of change of momentum of a system equal to net force acting on system!f = dp dt Sum of forces

More information

Mongkol Mongkolwongrojn 1*, Ruksakul Boonpuang 2. Thailand E-mail [email protected] 2

Mongkol Mongkolwongrojn 1*, Ruksakul Boonpuang 2. Thailand E-mail kmmongko@kmitl.ac.th 2 การประช มว ชาการเคร อข ายว ศวกรรมเคร องกลแห งประเทศไทย คร งท 23 4 7 พฤศจ กายน 2552 จ งหว ดเช ยงใหม Effect of Ambient Pressure Change on Static Characteristics of a Head Slider under Point Source in Magnetic

More information

Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.

Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved. Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,

More information

Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling. Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S.

Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling. Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S. Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S. Kumara (PhD Student), PO. Box 203, N-3901, N Porsgrunn, Norway What is CFD?

More information

Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals

Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals Originally published in 2007 American Society for Engineering Education Conference Proceedings

More information

NUMERICAL INVESTIGATION OF HEAT AND MASS TRANSFER IN A REFRIGERATED TRUCK COMPARTMENT

NUMERICAL INVESTIGATION OF HEAT AND MASS TRANSFER IN A REFRIGERATED TRUCK COMPARTMENT NUMERICAL INVESTIGATION OF HEAT AND MASS TRANSFER IN A REFRIGERATED TRUCK COMPARTMENT T. LAFAYE DE MICHEAUX (a), V. SARTRE (a)*, A. STUMPF (b), J. BONJOUR (a) (a) Université de Lyon, CNRS INSA-Lyon, CETHIL,

More information

CFD SIMULATION OF IPR-R1 TRIGA SUBCHANNELS FLUID FLOW

CFD SIMULATION OF IPR-R1 TRIGA SUBCHANNELS FLUID FLOW 2013 International Nuclear Atlantic Conference - INAC 2013 Recife, PE, Brazil, November 24-29, 2013 ASSOCIAÇÃO BRASILEIRA DE ENERGIA NUCLEAR - ABEN ISBN: 978-85-99141-05-2 CFD SIMULATION OF IPR-R1 TRIGA

More information

Application of Wray-Agarwal Model to Turbulent Flow in a 2D Lid-Driven Cavity and a 3D Lid- Driven Box

Application of Wray-Agarwal Model to Turbulent Flow in a 2D Lid-Driven Cavity and a 3D Lid- Driven Box Washington University in St. Louis Washington University Open Scholarship Engineering and Applied Science Theses & Dissertations Engineering and Applied Science Summer 8-14-2015 Application of Wray-Agarwal

More information

MODELING OF CAVITATION FLOW ON NACA 0015 HYDROFOIL

MODELING OF CAVITATION FLOW ON NACA 0015 HYDROFOIL Engineering MECHANICS, Vol. 16, 2009, No. 6, p. 447 455 447 MODELING OF CAVITATION FLOW ON NACA 0015 HYDROFOIL Jaroslav Štigler*, Jan Svozil* This paper is concerning with simulations of cavitation flow

More information

COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES

COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES ME469B - Spring 2007 COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES Gianluca Iaccarino Dept. Mechanical Engineering Bldg. 500 RM 204 (RM500-I) Ph. 650-723-9599 Email: [email protected] ME469B/1/GI

More information

Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine

Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine HEFAT2012 9 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 16 18 July 2012 Malta Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine Dr MK

More information

Chemical Engineering - CHEN

Chemical Engineering - CHEN Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617

More information

STEADY STATE MODELING AND SIMULATION OF HYDROCRACKING REACTOR

STEADY STATE MODELING AND SIMULATION OF HYDROCRACKING REACTOR Petroleum & Coal ISSN 1337-7027 Available online at www.vurup.sk/petroleum-coal Petroleum & Coal 54 (1) 59-64, 2012 STEADY STATE MODELING AND SIMULATION OF HYDROCRACKING REACTOR Abhinanyu Kumar, Shishir

More information

Fundamentals of Fluid Mechanics

Fundamentals of Fluid Mechanics Sixth Edition. Fundamentals of Fluid Mechanics International Student Version BRUCE R. MUNSON DONALD F. YOUNG Department of Aerospace Engineering and Engineering Mechanics THEODORE H. OKIISHI Department

More information

Simulation of Flow Field and Particle Trajectories in Hard Disk Drive Enclosures

Simulation of Flow Field and Particle Trajectories in Hard Disk Drive Enclosures Simulation of Flow Field and Particle Trajectories in Hard Disk Drive Enclosures H. Song*, M. Damodaran*and Quock Y. Ng** *Singapore-Massachusetts Institute of Technology Alliance (SMA) Nanyang Technological

More information

Title The institution Years

Title The institution Years Name and surname: Engin GEDİK Birth date : 12.04.1981 CV and list of the Academic Effort 1. Education Degree Department University Year Bachelor (BSc) Mechanical Education Z. Karaelmas University 2004

More information

Grover School of Engineering CCNY Chemical Engineering MS Program Frequently Asked Questions

Grover School of Engineering CCNY Chemical Engineering MS Program Frequently Asked Questions Grover School of Engineering CCNY Chemical Engineering MS Program Frequently Asked Questions What makes the Department of Chemical Engineering at CCNY different from other programs? The Department of Chemical

More information

Problem Statement In order to satisfy production and storage requirements, small and medium-scale industrial

Problem Statement In order to satisfy production and storage requirements, small and medium-scale industrial Problem Statement In order to satisfy production and storage requirements, small and medium-scale industrial facilities commonly occupy spaces with ceilings ranging between twenty and thirty feet in height.

More information

CFD MODELLING OF TOP SUBMERGED LANCE GAS INJECTION

CFD MODELLING OF TOP SUBMERGED LANCE GAS INJECTION CFD MODELLING OF TOP SUBMERGED LANCE GAS INJECTION Nazmul Huda PhD Student Faculty of Engineering and Industrial Science Swinburne University of Technology Melbourne, Australia Supervised by Dr. Jamal

More information

HEAT TRANSFER ENHANCEMENT ON DOUBLE PIPE HEAT EXCHANGER BY WIRE COILED AND TAPER WIRE COILED TURBULATOR INSERTS

HEAT TRANSFER ENHANCEMENT ON DOUBLE PIPE HEAT EXCHANGER BY WIRE COILED AND TAPER WIRE COILED TURBULATOR INSERTS HEAT TRANSFER ENHANCEMENT ON DOUBLE PIPE HEAT EXCHANGER BY WIRE COILED AND TAPER WIRE COILED TURBULATOR INSERTS J.Kalil basha 1,G.Karthikeyan 2, S.Karuppusamy 3 1,2 Assistant Professor, Dhanalakshmi Srinivasan

More information

2. CHRONOLOGICAL REVIEW ABOUT THE CONVECTIVE HEAT TRANSFER COEFFICIENT

2. CHRONOLOGICAL REVIEW ABOUT THE CONVECTIVE HEAT TRANSFER COEFFICIENT ANALYSIS OF PCM SLURRIES AND PCM EMULSIONS AS HEAT TRANSFER FLUIDS M. Delgado, J. Mazo, C. Peñalosa, J.M. Marín, B. Zalba Thermal Engineering Division. Department of Mechanical Engineering University of

More information

Numerical simulations of heat transfer in plane channel

Numerical simulations of heat transfer in plane channel Numerical simulations of heat transfer in plane channel flow Najla El Gharbi, Rafik Absi, Ahmed Benzaoui To cite this version: Najla El Gharbi, Rafik Absi, Ahmed Benzaoui. Numerical simulations of heat

More information

Effect of Pressure Ratio on Film Cooling of Turbine Aerofoil Using CFD

Effect of Pressure Ratio on Film Cooling of Turbine Aerofoil Using CFD Universal Journal of Mechanical Engineering 1(4): 122-127, 2013 DOI: 10.13189/ujme.2013.010403 http://www.hrpub.org Effect of Pressure Ratio on Film Cooling of Turbine Aerofoil Using CFD Vibhor Baghel

More information

CFD simulations using an AMR-like approach in the PDE Framework Peano

CFD simulations using an AMR-like approach in the PDE Framework Peano CFD simulations using an AMR-like approach in the PDE Framework Peano, Fakultät für Informatik Technische Universität München Germany Miriam Mehl, Hans-Joachim Bungartz, Takayuki Aoki Outline PDE Framework

More information

Heat Transfer From A Heated Vertical Plate

Heat Transfer From A Heated Vertical Plate Heat Transfer From A Heated Vertical Plate Mechanical and Environmental Engineering Laboratory Department of Mechanical and Aerospace Engineering University of California at San Diego La Jolla, California

More information

Hybrid Modeling and Control of a Power Plant using State Flow Technique with Application

Hybrid Modeling and Control of a Power Plant using State Flow Technique with Application Hybrid Modeling and Control of a Power Plant using State Flow Technique with Application Marwa M. Abdulmoneim 1, Magdy A. S. Aboelela 2, Hassen T. Dorrah 3 1 Master Degree Student, Cairo University, Faculty

More information

Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions

Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions M. Bianchi Janetti 1, F. Ochs 1 and R. Pfluger 1 1 University of Innsbruck, Unit for Energy Efficient Buildings,

More information

ACETYLENE AIR DIFFUSION FLAME COMPUTATIONS; COMPARISON OF STATE RELATIONS VERSUS FINITE RATE KINETICS

ACETYLENE AIR DIFFUSION FLAME COMPUTATIONS; COMPARISON OF STATE RELATIONS VERSUS FINITE RATE KINETICS ACETYLENE AIR DIFFUSION FLAME COMPUTATIONS; COMPARISON OF STATE RELATIONS VERSUS FINITE RATE KINETICS by Z Zhang and OA Ezekoye Department of Mechanical Engineering The University of Texas at Austin Austin,

More information

3. Prescribe boundary conditions at all boundary Zones:

3. Prescribe boundary conditions at all boundary Zones: CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,

More information

Radial-axial Radial mixing is based on the premise that the fluids to be mixed enter the mixer in the correct proportions simultaneously

Radial-axial Radial mixing is based on the premise that the fluids to be mixed enter the mixer in the correct proportions simultaneously Brochure E-0501 1 Introduction. Static mixers are used for a wide range of applications including mixing, heat exchange and dispersion, due to numerous unique innovations our products are especially suitable

More information

NUMERICAL INVESTIGATIONS ON HEAT TRANSFER IN FALLING FILMS AROUND TURBULENCE WIRES

NUMERICAL INVESTIGATIONS ON HEAT TRANSFER IN FALLING FILMS AROUND TURBULENCE WIRES NUMERICAL INVESTIGATIONS ON HEAT TRANSFER IN FALLING FILMS AROUND TURBULENCE WIRES Abstract H. Raach and S. Somasundaram Thermal Process Engineering, University of Paderborn, Paderborn, Germany Turbulence

More information

PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL

PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL P. Kolar, T. Holkup Research Center for Manufacturing Technology, Faculty of Mechanical Engineering, CTU in Prague, Czech

More information

CFD Application on Food Industry; Energy Saving on the Bread Oven

CFD Application on Food Industry; Energy Saving on the Bread Oven Iranica Journal of Energy & Environment 3 (3): 241-245, 2012 ISSN 2079-2115 IJEE an Official Peer Reviewed Journal of Babol Noshirvani University of Technology DOI: 10.5829/idosi.ijee.2012.03.03.0548 CFD

More information

Comparison of Heat Transfer between a Helical and Straight Tube Heat Exchanger

Comparison of Heat Transfer between a Helical and Straight Tube Heat Exchanger International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 1 (2013), pp. 33-40 International Research Publication House http://www.irphouse.com Comparison of Heat Transfer

More information

Department of Chemical Engineering University of Virginia GRADUATE PROGRAMS HANDBOOK

Department of Chemical Engineering University of Virginia GRADUATE PROGRAMS HANDBOOK Department of Chemical Engineering University of Virginia GRADUATE PROGRAMS HANDBOOK August 2014 Table of Contents How to Succeed in Your Graduate Education 2 Overview of Graduate Programs. 4 Master s

More information

E N G I N E E R I N G E X C E L L E N C E. Tunnel ventilation

E N G I N E E R I N G E X C E L L E N C E. Tunnel ventilation E N G I N E E R I N G E X C E L L E N C E Tunnel ventilation n Tunnel ventilation know-how Ventilation is a key element of electro-mechanical equipment and is crucial to the safety of tunnel operation.

More information

A. Hyll and V. Horák * Department of Mechanical Engineering, Faculty of Military Technology, University of Defence, Brno, Czech Republic

A. Hyll and V. Horák * Department of Mechanical Engineering, Faculty of Military Technology, University of Defence, Brno, Czech Republic AiMT Advances in Military Technology Vol. 8, No. 1, June 2013 Aerodynamic Characteristics of Multi-Element Iced Airfoil CFD Simulation A. Hyll and V. Horák * Department of Mechanical Engineering, Faculty

More information