Electronic Identification

Transcription

1 Product Catalogue

2 ELID is an acronym for Electronic Identification ELID was established on Sept 9, 1989 in Kuala Lumpur, Malaysia, and is well known for supplying Access Control Systems, Time Attendance Systems and Integrated Security Management Systems. She is one of the largest suppliers of Access Control System in South East Asia. Over the past 19 years, ELID has acquired valuable expertise and experience in key technologies related to the electronic identification and integrated security management system industry. ELID is committed to the continual development of innovative new products year after year. Vision Our vision is to be a world-renowned manufacturer of Electronic Identification Systems. Mission Our mission is to create original, innovative and superior products at affordable prices and provide genuine customer satisfaction as well as to contribute to the well-being of society. Goal We have progressed steadily to capture a significant market share in South East Asia. We aim to consolidate this, and extend our market coverage throughout the world. Belief We believe that our greatest asset is our people. Our people are behind our growth and success. No matter how much capital, technology and equipment we boast, it is bound to fail if human resources are not developed. Therefore we strive to Make People Before Making Products, and we are committed to bring out the best in people through comprehensive and systematic human resource development programs. Commitment We will constantly challenge ourselves to be a God-fearing, moral and ethical Company, whose employees are honest and trustworthy, and uphold high ethical standards in all their dealings.

3 Access Control System EL360 Access Control System EL370 Access Control System EL1300 Access Control System EL1330 Access Control System EL22XX Access Control System EL3000 Fingerprint Access Control System FC1205 Car Park Access Control System EL2205L Lift Access Control System Time Recording Terminal ET636 Time Recording Terminal ET630 Time Recording Terminal ET1200 series Time Recording Terminal ET3100 Fingerprint Time Recording Terminal ET3000 Fingerprint Time Recording Terminal Access Management Software EsofWIN X3 EsofWIN2 E.WIN Time Clock Interface Software ETWIN DataCenter E.SDK Time Clock Software Development Tool Time Management Software Reader/Keypad Mifare Smart Card Reader HID Proximity Reader EM Proximity Reader Bar Code Reader Magnetic Reader Handkey Reader Keypad Communicator/Converter Card EL70T Communicator EL70B Communicator EL70D Communicator EL70U Communicator EL38 Communicator EL78A LAN Terminal Server CV4823 Converter EA48 Converter EA52 Converter Miifare card HID Card EM Card Magnetic Card Accessories Power Supply & Transformer Metal Casing Miscellaneous OnTime Single-shift Time Attendance Software EasyTime Single-shift Time Attendance Software Chronos Single-shift Time Attendance Software E.Time Multiple-shift Time Attendance Software OnTime Plus Multiple-shift Time Attendance Software

4 EL360 Access Control System The EL360 Single-Door Access Controller combines access controller, card reader and keypad, designed to work independently. Multiple units can be connected together such that programming and report generations are handled through a PC running an ELID access management software. Highlighted of EL360 Storage capacity: Stores up to 2,000 users' IDs and 1,000 offline transactions Display and keypad: LED 7-segment display and 16-key keypad Built-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used) Caters for timers and time zones, limiting access and users to different times of the day. High security level while door is forced to open. The inputs and outputs are located on a separate module at the EZ6 which is mounted in a secure area. Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication Interface: RS485 Dimensions: 115(H)x90(W)x30(D) mm Technical Specification MCU Memory Clock Communication Interface Output Input In Reader Out Reader Buzzer Indicator Tamper Switch Power Supply Current Consumption Operating Temperature (ºC) 8-bit CPU running at 40 MHz 2KB RAM, 32KB Flash, 64KB EEPROM Real-time Clock with Lithium back-up RS485 (2-wire) 2 (Door Lock, General Purpose Output) 3 (Push Button, Door Sensor, Sensor Input) Built-in External Built-in LED 7-segment Built-in 12 VDC 0.5A 0-50 Features Card Database 2,000 Transaction Database 1,000 Card Format Operation Mode Time Zone 10 Timer 24 Holiday 20 Adjustable Lock Release Time Permanent Lock Release Automatic Pin Disable Time Zone Automatic Lock Release Time Zone Inhibit Access Continuous Swiping Keypad Lock Out Wiegand 26-bit, Free Wiegand, proprietary 3 (Card, Card + PIN, PIN) (PIN mode only) Baud Rate 2,400 to 9,600

5 EL-0360-S02 EL-0360-B02 EA-Z006-G01 EL360E/S Single Door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity Master Card in Silvery White Plastic Housing with Blue LED (w/o EZ6 & Power Supply Adapter) EL360E/B Single Door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity Master Card in Black Plastic Housing with RED LED (w/o EZ6 & Power Supply Adapter) EZ6 Remote Relay for EL360/370 in Plastic Housing

6 Technical Specification MCU Memory Clock Communication Interface Output Input In Reader Out Reader Buzzer Indicator Tamper Switch Power Supply Current Consumption Operating Temperature (ºC) 8-bit CPU running at 40 MHz Highlighted of EL370 2KB RAM, 32KB Flash, 64KB EEPROM Real-time Clock with Lithium back-up RS485 (2-wire) 2 (Door Lock, General Purpose Output) 3 (Push Button, Door Sensor, Sensor Input) Built-in External Built-in 2x20-character LCD Built-in 12 VDC 0.5A 0-50 EL370 Access Control System The EL370 Single-Door Access Controller combines access controller, card reader and keypad. The features of the EL360 and EL370 are identical. The only difference is that the EL 370 has an LCD display whereby the EL360 has a 7-segment display. Storage capacity: Stores up to 2,000 users' IDs and 1,000 offline transactions Display and keypad: 2x20-character backlit LCD display and 16-key keypad Built-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used) Caters for timers and time zones, limiting access and users to different times of the day High security level while door is forced to open. The inputs and outputs are located on a separate module at the EZ6 which is mounted in a secure area Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication Interface: RS485 Dimensions: 115(H)x90(W)x30(D) mm Features Card Database 2,000 Transaction Database 1,000 Card Format Operation Mode Time Zone 10 Timer 24 Holiday 20 Adjustable Lock Release Time Permanent Lock Release Automatic Pin Disable Time Zone Automatic Lock Release Time Zone Inhibit Access Continuous Swiping Keypad Lock Out Wiegand 26-bit, Free Wiegand, proprietary 3 (Card, Card + PIN, PIN) (PIN mode only) Baud Rate 2,400 to 9,600

7 EL-0370-S01 EL-0370-B01 EA-Z006-G01 EL370E/S Single-Door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity Master Card in Silvery White Plastic Housing with GLCD display (w/o EZ6 & Power Supply Adapter) EL370E/B Single-Door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity Master Card in Black Plastic Housing with GLCD display (w/o EZ6 & Power Supply Adapter) EZ6 Remote Relay for EL360/370 in Plastic Housing

8 EL1300 Access Control System EL1300 Single Door Controller is designed for small to mid-sized enterprises. All functions can be programmed through its entry keypad unit. Multiple units can be connected together such that programming and report generations are handled through a PC running an ELID access management software. Highlighted of EL1300 Storage capacity: Stores up to 1,750 users IDs and 1,000 offline transactions Reader type: Supports various types of reader such as Magnetic, Proximity, Mifare Contactless Smart Card reader Caters for timers and time zones, limiting access and users to different times of the day Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time Zone Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: Multi-drop or RS485 Technical Specification MCU Memory Clock Communication Interface Output Input In Reader Out Reader Buzzer Indicator Tamper Switch Power Supply Current Consumption Operating Temperature (ºC) 8-bit CPU running at 8 MHz 512B RAM, 32KB Flash ROM, 16KB EEPROM Real-time Clock with Lithium back-up Multi-drop or RS485 (2-wire) 2 (Door Lock, General Purpose Output) 5 (Exit Push Button, Door Sensor, 3 Supervised Inputs) External External Built-in Reader LED Built-in 15VAC input, 13.8V output, 1.5A output 0.5A 0-50 Features Card Database 1,750 Transaction Database 1,000 Card Format Operation Mode Time Zone 10 Timer 24 Holiday 20 Adjustable Lock Release Time Permanent Lock Release Automatic Pin Disable Time Zone Automatic Lock Release Time Zone Inhibit Access Continuous Swiping Anti-Passback Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA 3 (Card, Card + PIN, PIN) Keypad Lock Out (PIN mode only) Baud Rate 2,400 to 9,600

9 EL EL1300 Single-Door Security Access System Module, 17VAC operation, with EM Proximity Master Card (w/o 1.5A Transformer, Reader, Keypad & Metal Housing)

10 EL1330 Access Control System EL1330 is a single-door controller designed to work independently. The EL1330 replaces the popular EL1300 and offers a number of new features over EL1300. In addition to RS485 and ELID proprietary Multi-drop, the EL1330 offers option of using TCP/IP by plugging a LAN module on board. The numbers of inputs and outputs have been increased and a new MCU is used which operates 4 times faster than the EL1300. Highlighted of EL1330 Storage capacity: Stores up to 2,000 users IDs and 1,000 offline transactions Reader type: Supports various types of reader such as Proximity and Mifare Contactless Smart Card reader Able to communicate with the PC through the Ethernet (EL1330 with LAN module) Caters for timers and time zones, limiting access and users to different times of the day Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time Zone Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: Multi-drop or RS485 or Ethernet Technical Specification MCU Memory Clock Communication Interface Output 8-bit CPU running at 20 MHz 2KB RAM, 32KB Flash ROM, 32+32KB EEPROM Real-time Clock with Lithium back-up Multi-drop, RS485 (2-wire), or Ethernet (with LAN module) 3 (Electric Lock, 2 General Purpose Outputs) Input 6 (Exit Push Button, Door Sensor, 4 Supervised Inputs) In Reader Out Reader Buzzer Indicator Tamper Switch Power Supply Current Consumption Operating Temperature (ºC) External External Built-in Reader LED Built-in 15VAC input, 13.8V output, 1.5A output 0.5A 0-50 Features Card Database 2,000 Transaction Database 1,000 Card Format Operation Mode Time Zone 10 Timer 24 Holiday 20 Adjustable Lock Release Time Permanent Lock Release Automatic Pin Disable Time Zone Automatic Lock Release Time Zone Inhibit Access Continuous Swiping Anti-Passback Keypad Lock Out Wiegand 26-bit, Free Wiegand 3 (Card, Card + PIN, PIN) (PIN mode only) Baud Rate 2,400 to 9,600

11 EL EA-TCPM-G02 EL1330 Single-Door Security Access System, 12VAC operation, with EM Proximity Master Card (w/o Power Supply Adapter, Reader, Keypad & Metal Housing) TCPIP LAN Module (ZNE10T) built-in with RJ45 socket (for EL1330), 10M

12 EL2200 Access Control System The EL2200 has established a solid reputation as an extremely reliable and versatile controller, easy-to-learn, easy-to-use and problem free. Various options and accessories allow the EL220X to be used for controlling doors (1 or 2 doors), elevators (up to 64 floors), car-park barriers (with Anti-passback) and time attendance. EL2200 The EL2200 is packaged in a plastic casing, with display and keypad on the cover, allowing the unit to be wall-mounted at eye level, to facilitate programming and report viewing. EL2205 The EL2205 is designed for mounting inside a metal panel together with power supply and back-up battery. The EL2205 can be expanded to become a 2-door, 2-reader controller by adding an EA2207 extension board. Highlighted of EL2200 Storage capacity: Stores up to 12,800 user-ids and 4,000 offline transactions Display and keypad: 2x20-character backlit LCD display and 16-key keypad Reader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Touch Memory, Mifare Contactless Smart Card reader Provision for dual card entry, output activation mapped to input status changes, fast reading speed and tail tag alarm operation Caters for timers and time zones, limiting access and users to different times of the day Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time Zone Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: Multi-drop Dimensions: 212(H)x155(W)x55(D) mm User Database Transaction Database Standard EL220X 1,600 2,000 Standard EL220X 3,200 1,000 EL220X with extended memory 6,400 4,000 EL220X with extended memory 12,800 2,000

13 Technical Specification MCU 8-bit CPU Out Reader External Memory 32KB/128KB SRAM, 512 EEPROM Buzzer Built-in Clock Real Time Clock with Lithium back-up Indicator 2x20-character LCD Communication Interface Multi-drop Tamper Switch Built-in Output 1 (On-board), 6 (Optional) Power Supply 15VAC input, 13.8V output, 2.5A output Input 2 (On-board), 2 (Optional) Current Consumption 90Ma In Reader External Operating Temperature (ºC) 0-50 Features Card Database 1,600 (Maximum 12,800) Automatic Pin Disable Time Zone Transaction Database 1,000 (Maximum 4,000) Automatic Lock Release Time Zone Card Format Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code Inhibit Access Operation Mode 3 (Card, Card + PIN, PIN) Continuous Swiping Time Zone 10 Anti-Passback Timer 24 Dual Card Holiday 20 Keypad Lock Out (PIN mode only) Adjustable Lock Release Time Permanent Lock Release Baud Rate 2,400

14 EL EL EA EA EL2200 Security Access System with LCD & EM Proximity Master Card in Plastic Housing (w/o EP23 & Reader) - 212(H)x155(W)x55(D) mm EL2205 Security Access System Module with LCD, Keypad & EM Proximity Master Card (w/o Power Supply, Reader & Metal Housing) EA2207 Extension Board c/w Accessories for EL2205 EA2201 Extended Memory EPROM & RAM Chip for EL2200/2205

15 EL3000 Access Control System The EL3000 FINGERFLEX Controller combines access controller, card reader and fingerprint recognition all-in-one compact and unique system designed after the shape of a human thumb. Highlighted of EL3000 Scanner: Silicon sensor. It provides accurate fingerprint recognition without being affected by skin texture and condition. Storage capacity: up to 10,000 users and 10,000 offline transactions Verification Mode Fingerprint only ID + PIN, ID only ID + Fingerprint Card (Elid format) + Fingerprint Storage Capacity (maximum) 89 users 10,000 users 3,600 users 10,000 users Display and keypad: 2x16-character backlit LCD display and 16-key keypad Built-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used) High accurate fingerprint recognition Fast verification time; suitable and effective for office or clean working environment Multiple verification mode Caters for timers and time zones, limiting access and users to different times of the day Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time Zone High security level while door is forced to open. The inputs and outputs are located on a separate module at the EL3Z which is mounted in a secure area Simple set-up and enrolment programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: RS485 (4-wire) Dimensions: 190(H) x 120(W) x 50(D) mm

16 Technical Specification MCU Out Reader External Memory Buzzer Built-in Clock Real Time Clock with Lithium back-up Indicator 2x16-character LCD Fingerprint Sensor Silicon, 500 dpi Tamper Switch Built-in Communication Interface RS485 (4-wire) Power Supply 12V DC Output 1 (EM-Lock) Current Consumption 12V / 1 A Input 2 (Door Sensor, Push Button) Operating Temperature (ºC) Additional I/O (EL3Z) In Reader 4-Input (non-supervise) and 6-Output Built-in Operating Humidity <85% -20 C and 70 C Features User Database 10,000 (adjustable) Holiday 40 Transaction Database 10,000 Adjustable Lock Release Time Verification Mode Fingerprint only (1:N), ID only, ID + Fingerprint (1:1), ID + PIN Permanent Lock Release Verification Time < 1 second Automatic Pin/ Fingerprint Disable Time Zone Enrollment Maximum 2 fingerprints enrollment per user Automatic Lock Release Time Zone False Rejection Rate <0.5% Inhibit Access False Acceptance Rate <0.001% Continuous Swiping Card Format Wiegand 26-bit, Free Wiegand Anti-Passback Time Zone 24 Baud Rate 2,400 to 57,600 Timer 24

17 EL EL EL EL-003Z-001 ET3000/MF FINGERFLEX Time Terminal, Built-in with Mifare Contactless Reader in Plastic Housing (w/o PS) - 190(H)x120(W)x50(D) mm EL3000/EM Fingerflex Biometric Access System, Built-in with EM Reader in Plastic Housing c/w Template Backup Manager Software (w/o PS) - 190(H) x120(w)x50(d) mm EL3000/HID Fingerflex Biometric Access System, Built-in with HID Reader in Plastic Housing c/w Template Backup Manager Software (w/o PS) - 190(H) x120(w)x50(d) mm EL3Z Remote I/O Relay Module (w/o Metal Housing)

18 FC1205 Car Park Access Control System The FC1205 Car Park System caters for a small car park with one entry barrier and one exit barrier. The controller is housed in a sturdy metal cabinet. Programming can be done either via using the keypad at the controller panel or remotely via a PC. Highlighted of FC1205 Storage capacity: Stores up to 3,200 user-ids and 2,000 offline transactions Display and keypad: 2x20-character backlit LCD display and 16-key keypad Reader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Mifare Contactless Smart Card reader Caters for timers and time zones, limiting access and users to different times of the day Comprehensive Anti-passback feature for car-park management Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: Multi-drop Dimensions: 381(H)x330(L)x91(W) mm Technical Specification CU Memory Clock Communication Interface Output Input In Reader Out Reader Buzzer Indicator 8-bit CPU 32KB/128KB SRAM, 512 EEPROM Real-time Clock with Lithium back-up Multi-drop 1 (On-board), 6 (Optional) 2 (On-board), 2 (Optional) External External Built-in Tamper Switch Built-in 2x20-character LCD Power Supply 15VAC input, 13.8V output, 2.5A output Current Consumption Operating Temperature (ºC) 90Ma 0-50 Features Card Database 3,200 Transaction Database 2,000 Card Format Operation Mode Time Zone 10 Holiday 20 Permanent Lock Release Inhibit Access Anti-Passback ATZ Mode Keypad Lock Out Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code 1(Card) Baud Rate 2,400 (PIN mode only)

19 EB FC1205 Car Park Access System for 1-Entry & 1-Exit Point c/w EL2205 Board, EP23 Power Supply, LCD, 16-keys Keypad for programming & Relay in Metal Housing, (w/o Master Card)

20 EL2205L Lift Access Control System The EL2205L Lift Access Controller extends control to elevators. One relay contact is provided for each floor that the lift serves. Maximum size is up to 64 floors. EL2205L consists of 3 parts. The main controller and power supply is housed in a single metal cabinet. Reader is usually mounted at the lift operation panel, while floor selection board with associated relays is separately mounted in another cabinet. Communication between floor selection unit and main controller may be up to 1 KM. Programming can be done either via using the keypad at the controller panel or remotely via a PC. Highlighted of EL2205L Storage capacity: Stores up to 2,700 user-ids and 2,000 offline transactions Display and keypad: 2x20-character backlit LCD display and 16-key keypad Reader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Mifare Contactless Smart Card reader Caters for timers and time zones, limiting access and users to different times of the day Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: Multi-drop Dimensions: 415(H)x405(W)x121(D) mm for each metal casing Technical Specification MCU Memory Clock Communication Interface In Reader Out Reader Buzzer Indicator Tamper Switch 8-bit HCMOS running at 4.9 Mhz 32KB SRAM, 512B EEPROM Real Time Clock with Lithium back-up Multi-drop External External Built-in 2x20-character LCD Built-in Power Supply 15VAC input, 13.8V output, 2.5A output Current Consumption Operating Temperature (ºC) Floor Selection Unit CPU Output Interface Relay 90mA excluding reader 0-50 MC68HC05C8 8-bit MPU 32 channels 1 SPDT, 3A rating Features Card Database 2,700 Transaction Database 2,000 Card Format Operation Mode Time Zone 10 Timer 24 Holiday 20 Adjustable Lock Release Time Permanent Lock Release Automatic Pin Disable Time Zone Automatic Floor Time Zone Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code 3 (Card, Card + PIN, PIN) Floor Zones 64 Inhibit Access Continuous Swiping Dual Card Keypad Lock Out Baud Rate 2,400 (PIN mode only)

21 EL-2205-L16 EL2205L/16 Lift Access System (Reader Optional) For 1-16 Floors Comprising: (w/o Master Card) 1 x EL2205 Board, 2 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 1 x EFD0016 Floor Selector (XS ), 1 x ES8A-1 Relay Board (16 points) & Mounted in metal casings x 2 (CS-1099) EL-2205-L32 EL2205L/32 Lift Access System (Reader Optional) For 1-32 Floors Comprising: (w/o Master Card) 1 x EL2205 Board, 2 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 1 x EFD0032 Floor Selector (XS ), 3 x ES8A-1 Relay Board (32 points) & Mounted in metal casings x 2 (CS-1099) EL-2205-L48 EL-2205-L64 EL2205L/48 Lift Access System (Reader Optional) For 1-48 Floors Comprising: (w/o Master Card) 1 x EL2205 Controller, 1 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 1 x EFD0032 Floor Selector (XS ), 1 x EP23 Power Supply 1.3A/12V, 3 x ES8A-1 Relay Board (32 points) & 1 x EFD0016 Floor Selector (XS ), 1 x EP23 Power Supply 1.3A/12V, 1 x ES8A-1 Relay Board (16 points) & Mounted in metal casings x 3 (CS-1099) EL2205L/64 Lift Access System (Reader Optional) For 1-64 Floors Comprising: (w/o Master Card) 1 x EL2205 Board, 3 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 2 x EFD0032 Floor Selector (XS ), 6 x ES8A-1 Relay Board (64 points) & Mounted in metal casings x 3 (CS-1099)

22 ET630 Time Recording Terminal ET630 is a versatile Time Recording Terminal with basic access control features and user friendly interface. Highlights of ET630 Storage capacity: Stores up to 6,000 offline transactions and unlimited user Displays: 128x64 pixel Graphical backlit LCD Keypad: 4x4 matrix membrane keypad with feather-touch keys Built-in proximity reading module ((EM/HID/Mifare, depending on the type of card reader used) Basic access control function through the connection of relay output to an electric lock Can integrate with third party time attendance software Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through serial download from PC Equipped with a calendar clock chip with on-board back-up battery to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: RS485 Dimensions: Technical Specification MCU Memory Clock Communication Interface Output Input In Reader Buzzer Indicator Power Supply Current Consumption Operating Temperature (ºC) 8-bit CPU running at 40 MHz 2 x 256K-bit EEPROM Real Time Clock with Lithium back-up RS485 (2-wire) 1 (General Purpose) 1 (Exit Push Button) Built-in Built-in Graphical backlit LCD, Buzzer 9V-15V 200mA 0-55 Features Card Database Transaction Database 6,000 Card Format Operation Mode Mode of Database 3 Session 1 Job Code 99 Time Zone for Sounder 1 Timer for Sounder 7 Time per timer 30 Time Zone for Sounder 1 Timer for Sounder 30 Holiday 40 Adjustable Lock Release Time Automatic Lock Release Time Zone Unlimited (Time Clock), 500 (Door Access) Wiegand 26-bit, Free Wiegand 1 (Card) Baud Rate 2,400 to 9,600

23 ET ET ET ET630 Time Recording Terminal, EM Reader c/w cable ET630 Time Recording Terminal, HID Reader c/w cable ET630 Time Recording Terminal, Mifare Reader c/w cable

24 ET636 Time Recording Terminal ET636 is a versatile Time Recording Terminal simply designed for ease of use. The features of the ET630 and ET636 are identical. The only difference is the hardware setup for the system. ET636 is directly plugged into the PC via USB cable for data polling and power supplying. Highlights of ET636 Storage capacity: Stores up to 6,000 offline transactions and unlimited user Display: 128x64 pixels Graphical backlit LCD Keypad: 4x4 matrix membrane keypad with feather-touch keys Built-in proximity reading module ((EM/HID/Mifare, depending on the type of card reader used) Can integrate with third party time attendance software Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through serial download from PC Equipped with a calendar clock chip with on-board back-up battery to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: USB Dimensions: Technical Specification MCU Memory Clock Communication Interface In Reader Buzzer Indicator Power Supply Current Consumption Operating Temperature (ºC) 8-bit CPU running at 40 MHz 2 x 256K-bit EEPROM Real Time Clock with Lithium back-up USB Built-in Built-in Graphical backlit LCD, Buzzer 5V USB power supply 200mA 0-55 Features Card Database Unlimited (Time Clock) Transaction Database 6,000 Card Format Wiegand 26-bit, Free Wiegand Operation Mode 1 (Card) Mode of Database 3 Session 1 Job Code 99 Time Zone for Sounder 1 Timer for Sounder 7 Time per timer 30 Holiday 40

25 ET ET ET ET636/E Time Recording Terminal with Stand (USB Communication), Chronos Software Installation CD, 10 EM Proximity Cards, USB Cable, Quick Start & User Manual contained in CD ET636/H Time Recording Terminal with Stand (USB Communication), Chronos Software Installation CD, 10 HID Proximity Cards, USB Cable, Quick Start & User Manual contained in CD. ET636/M Time Recording Terminal with Stand (USB Communication), Chronos Software Installation CD, 10 Mifare Proximity Cards, USB Cable, Quick Start & User Manual contained in CD

26 ET1200 series Time Recording Terminal The ET1200 Time Recording Terminal is housed in a sturdy metal cabinet. Power supply, including back-up battery (for 6 hours operation), lightning surge protector, and time operated relay output for linking to an external sounder are all built in. Highlights of ET1200 series Storage capacity: Stores up to 10,000 offline transactions and unlimited user or 2,000 ID numbers. Display: 2x20-character LCD and 4x7-segment LED display Keypad: 16-key keypad Reader: Supports various types of reader such as Magnetic, Bar Code, Proximity, Touch Memory, Mifare Contactless Smart Card reader Incorporated a complete set of diagnostic test routines Improved data storage integrity checking Caters for 9 working sessions with In & Out selection respectively Built-in firmware allows ET1200 to be used with Job Costing, and Meal Subsidy application software Can integrate with third party time attendance software Simple set-up programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: Multi-drop Dimensions: 295(H)x220(W)x95(D) mm Technical Specification MCU Memory Clock Communication Interface Output 1 Input 2 In Reader Buzzer Indicator Power Supply Internal Back-up Battery 8-bit HCMOS running at 4.9 Mhz 32KB/128KB SRAM, 512 EEPROM Real Time Clock with Lithium back-up Multi-drop Built-in (except ET1205) LED Built-in Current Consumption 90Ma Operating Temperature (ºC) 240VAC input or 110VAC, 50 or 60Hz 12V/1.2AH Sealed Lead Acid Battery 0-50 Features Card Database Transaction Database 10,000 Card Format Operation Mode Mode of Database 3 Session 9 Job Code 999 Time Zone for Sounder 18 Timer for Sounder 18 Holiday 20 Adjustable Lock Time Release Auto Time Command unlimited user or 2,000 ID numbers Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code 1 (Card) Baud Rate

27 ET ET ET ET ET ET1241 Time Clock c/w Extended Memory (10K transaction records), ER35 Infra Red Bar Code Reader, backlit LCD, EP23 Power Supply, 12V/1.3AH Battery, Metal Housing & 1 set Barcode Master Card (2/5) ET1237 Time Clock c/w Extended Memory (10K transaction records), ERM23 Proximity Reader, backlit LCD, EP23 Power Supply & 12V/1.3AH Battery in Metal Housing. ET1233 Time Clock c/w Extended Memory (10K transaction records), ERH23 Proximity Reader, backlit LCD, EP23 Power Supply, 12V/1.3AH Battery & Metal Housing ET1201 Time Clock c/w Extended Memory (10K transaction records), Magnetic Reader, EP23 Power Supply & 12V/1.3AH Battery in Metal Housing ET1205 Time Clock c/w Extended Memory (10K transaction records), backlit LCD, EP23 Power Supply & 12V/1.3AH Battery in Metal Housing (w/o Reader)

28 Technical Specification ET3100 Bioflex Fingerprint Time Recording Terminal ET3100 is a user-friendly, reliable and cost-effective Optical Fingerprint Recognition Time Recording Terminal. It captures and stores fingerprint image as template and verifies each specific finger's unique ridge pattern for highly personalized identification. Therefore, abuse of time attendance through 'buddy punching' will never happen. The ET3100 also doubles up as a basic door access control system which secures your company's premises from unauthorized access. Highlights of ET3100 Scanner : Optical sensor Storage capacity: Stores up to 30,000 offline transactions and 9,000 fingerprint templates Display: 128x64 pixels Graphical backlit LCD Keypad: 16-key keypad Support proximity reader High accurate fingerprint recognition Fast verification time; suitable and effective for office or factory environment Enables enrolment of up to 10 fingerprints for each user Multiple verification mode Caters for 9 working sessions with In & Out selection respectively Basic access control function through the connection of relay output to an electric lock Can integrate with third party time attendance software Simple set-up and enrolment programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication Interface: RS485, TCP/IP LAN (optional) Dimensions: 180(H) x 150(W) x 50(D) mm MCU MC9S12GC128 Out Reader External Memory 512kbytes SRAM Buzzer Built-in Clock Real Time Clock with Lithium back-up Indicator Fingerprint Sensor Optical, 500 dpi Tamper Switch Built-in Communication Interface RS485, LAN (optional) Power Supply 12V DC Onboard Output 2 (EM-Lock, Sounder) Current Consumption 1.5A to 2.5A Onboard Input 2 (Door Sensor, Push Button) LED Operating Temperature (ºC) 0 C - 55 C In Reader External Operating Humidity <85%

29 Technical Specification User Database 10,000 Session 9 Fingerprint Template Database 9,000 templates Job Code 999 Transaction Database 30,000 Time Zone for Sounder 1 Verification Mode Fingerprint only (1:N), ID only, ID + Fingerprint (1:1), ID + PIN Verification Time Average 1 second for 1000 fingerprint templates Enrollment Maximum 10 fingerprints enrollment per user Timer for Sounder 4 Times per Timer 18 Holiday 20 False Rejection Rate 1.4% Adjustable Lock Release Time False Acceptance Rate % Baud Rate 2,400 to 57,600 ET ET3100 Fingerprint Time Recording Terminal, c/w DataCenterFP BioFlex interface Software & Templete Backup Manager Software for ET3100 in CD only ET-3100-L01 ET3100/L Fingerprint Time Recoring Terminal, built-in with TCP/IP, c/w DataCenterFP BioFlex interface Software & template Backup Manager Software for ET3100 in CD only

30 ET3000 Fingerprint Time Recording Terminal The ET3000 combines time recording terminal, card reader and fingerprint recognition all-in-one compact and unique system designed after the shape of a human thumb. Highlights of ET3000 Scanner: Silicon sensor. It provides accurate fingerprint recognition without being affected by skin texture and condition. Storage capacity: up to 10,000 users and 10,000 offline transactions Verification Mode Fingerprint only ID + PIN, ID only ID + Fingerprint Card (Elid format) + Fingerprint Storage Capacity (maximum) 89 users 10,000 users 3,600 users 10,000 users Display and keypad: 2x16-character backlit LCD display Keypad: 16-key keypad Built-in proximity reading module ((EM/HID/Mifare, depending on the type of card reader used) High accurate fingerprint recognition Fast verification time; suitable and effective for office or clean working environment Multiple verification mode Caters for 9 working sessions with In & Out selection respectively Basic access control function through the connection of relay output to an electric lock Can integrate with third party time attendance software Simple set-up and enrolment programming with scroll-down menu within the controller Firmware can be updated in-circuit, through the serial download from the PC Equipped with a calendar clock chip to give accurate date and time Battery back-up for internal data storage and time clock Communication interface: RS485 (4-wire) Dimensions: 190(H) x 120(W) x 50(D) mm

31 Technical Specification MCU Out Reader External Memory Buzzer Built-in Clock Real Time Clock with Lithium back-up Indicator LED, Buzzer Fingerprint Sensor Silicon, 500 dpi Tamper Switch Built-in Communication Interface RS485 (4-wire) Power Supply 12V DC Output 1 (EM-Lock) Current Consumption 12V / 1 A Input 2 (Door Sensor, Push Button) Operating Temperature (ºC) Additional I/O (EL3Z) In Reader 4-Input (non-supervise) and 6-Output Built-in Operating Humidity <85% -20 C and 70 C Features User Database 10,000 (adjustable) Timer 24 Transaction Database 10,000 Holiday 40 Verification Mode Fingerprint only (1:N), ID only, ID + Fingerprint (1:1), ID + PIN Adjustable Lock Release Time Verification Time < 1 second Permanent Lock Release Enrollment Maximum 2 fingerprints enrollment per user Automatic Pin/ Fingerprint Disable False Rejection Rate <0.5% Automatic Lock Release Time Zone False Acceptance Rate <0.001% Inhibit Access Session 9 Continuous Swiping Job Code 999 Anti-Passback Time Zone 24 Baud Rate 2,400 to 57,600

32 ET ET3000/MF FINGERFLEX Time Terminal, Built-in with Mifare Contactless Reader in Plastic Housing (w/o PS) - 190(H)x120(W)x50(D) mm ET ET3000/EM FINGERFLEX Time Terminal, Built-in with EM Reader in Plastic Housing c/w Template Backup Manager Software (w/o PS) - 190(H)x120(W) ET ET3000/HID FINGERFLEX Time Terminal, Built-in with HID Reader in Plastic Housing c/w Template Backup Manager Software (w/o PS) - 190(H)x120(W)x50 (D) mm

33 EsofWIN2 The EsofWIN2 is a Windows-based single workstation access management software. EsofWIN2 is rich in features, offering an easy way to manage security of up to 64 controllers, and generate time attendance reports (together with OnTime single-shift time attendance software). A powerful graphic user interface is provided, where devices and doors status appear as icons on floor-plan maps, and the icon changes as status of the device changes. It also allows pictures of users to be put into the database. Highlights of EsofWIN2 Provides system access rights for different users Simple setting of time zones, door-access levels and lift-floor access for card holders Provides basic alarm monitoring features (Acknowledge, Disarm and Arm) Provides real-time activity monitoring, which means activities occurring at the controllers are reported immediately and displayed on the On-line Monitoring Screen or redirected to a printer connected to the PC Report filtering up to 3 layers The attendance records can be exported into text/excel format which can be used for integration with third party software Multiple-shift time attendance software (OnTime Plus) is an optional module that integrated into EsofWIN2 to monitor staff s attendance effectively Provides modem support module that supports Hayes compatible dial-up and leased line modems. Available in English, Chinese, Malay and Portuguese System Requirement Processor Operation System RAM HDD Comm. Port 1 Printer Port 1 Display Pentium IV or higher Microsoft Windows 2000/XP or higher 128 MB or higher 30 MB (Installation) 100 MB (Operation) 800 x 600 (16 colours) or higher

34 EW-EWIN-007 EK EsofWIN /0 Software, 1-4 Doors c/w FREE add-on OnTime in Software CD EsofWIN /1 Software Key (DB9), 1-16 Doors c/w FREE add-on OnTime in Software CD (Softkey, DB9) EK EsofWIN /2 Software Key (DB9), 1-32 Doors c/w FREE add-on OnTime in Software CD (Softkey, DB9) EK EK EsofWIN /3 Software Key (DB9), 1-64 Doors c/w FREE add-on OnTime in Software CD (Softkey, DB9) EsofWIN /5 Software Key (DB9), up to 64 Doors, Modem Version c/w FREE add-on OnTime in Software CD (Softkey, DB9) Optional Combination Software Key EsofWIN + OnTime Plus: EK-0012-EKM EsofWIN /1 Single-User Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), 1-16 Doors in CD (Softkey, DB9) EK-0015-EKM EK-0018-EKM EK-0021-EKM EsofWIN /2 Single-User Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), 1-32 Doors in CD (Softkey, DB9) EsofWIN /3 Single-User Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), 1-64 Doors in CD (Softkey, DB9) EsofWIN /5 Single-User Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), Modem Version, 1-64 Doors in CD (Softkey, DB9)

35 EsofWIN X3 The EsofWIN X3 is a simplified version of EsofWIN2 and only supports up to 8 doors. It provides most of the common features of EsofWIN2, but the GUI has been redesigned to be particularly user friendly. It also has built-in single-shift time attendance software (EasyTime). Highlights of EsofWIN X3 Administrator is able to access the full system whereby the user only can view the software only Simple setting of time zones (maximum 10 time zones), door-access levels and lift-floor access for card holders Provides basic alarm monitoring features (Acknowledge, Disarm and Arm) Provides real-time activity monitoring, which means activities occurring at the controllers are reported immediately and displayed on the On-line Monitoring Screen or redirected to a printer connected to the PC The attendance records can be exported into text/excel format which can be used for integration with third party software Available in English, Chinese System Requirement Processor Operation System RAM HDD Comm. Port 1 Printer Port 1 Display Pentium IV or higher Microsoft Windows 2000/XP or higher 128 MB or higher 30 MB (Installation) 100 MB (Operation) 800 x 600 (16 colours) or higher EW-EWIN-X00 EsofWIN X3 Single-User Access Management Software in CD only, 1-8 doors

36 E.WIN The E.WIN is an enhanced version of EsofWIN2. It provides graphical user interface for data entry and information retrieval thus offering an easy way to manage security of up to 128 doors. It also has built-in single-shift time attendance software. It is ideally designed with vast options and capabilities commonly required for a medium sized organization. E.WIN can be recognized easily as a key solution for security risks, enabling users with a peace of mind for a cost effective, robust and easily upgradeable system. Highlights of E.WIN Provides system access rights for different users Provides a comprehensive audit trail reports of administrator/user s actions Supports TCP/IP network s setting Simple setting of time zones, door-access levels and lift-floor access for card holders Provides Car Counting facility Provides basic alarm monitoring features (Acknowledge, Disarm and Arm) Provides real-time activity monitoring, which means activities occurring at the controllers are reported immediately and displayed on the On-line Monitoring Screen or redirected to a printer connected to the PC Report filtering up to 3 layers The attendance records can be exported into text/excel format which can be used for integration with third party software Provides a built-in tiny web server module enabling the E.WIN information to be viewed through the standard web browsers anywhere at anytime easily Multiple-shift time attendance software (E.Time) is an optional module that integrated into E.WIN to monitor staff s attendance effectively Provides modem support module that supports Hayes compatible dial-up and leased line modems Available in English and Chinese System Requirement Processor Operation System Pentium IV or higher Microsoft Windows 2000/XP or higher RAM 128 MB or higher HDD 30 MB (Installation) 100 MB (Operation) Comm. Port 1 Printer Port 1 Display 800 x 600 (16 colours) or higher

37 EW-EWIN-X00 EW-EWIN-D01 EW-EWIN-D02 EW-EWIN-D03 EW-EWIN-D04 E.WIN /0 Single-User Access Management Software for controlling 1-4 Doors, add-on OnTime Time Attendance Software (Single-Shift) in CD E.WIN /1 Single-User Access Management Software for controlling 16 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9) E.WIN /2 Single-User Access Management Software for controlling 32 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9) E.WIN /3 Single-User Access Management Software for controlling 64 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9) E.WIN /4 Single-User Access Management Software for controlling 128 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9) Optional Software Modules for E.WIN EW-EWIN-M01 E.WIN Time Management Module (E.Time), Multiple-Shift EW-EWIN-M02 EW-EWIN-M03 EW-EWIN-M05 E.WIN Lift Access Module E.WIN Modem Module E.WIN WEB Support Module

38 ETWIN ETWIN is meant for users who have their own Time Attendance software, but do not wish to write polling routines to talk to ELID Time Recording Terminals. ETWIN only works with ET1200 series. It provides an output file in text file format. Integration can be done through the output text file (LatestTrans.dat). Standard, Modem & Terminal Server version are available in ETWIN. EK-021T-RK1 ETWIN V2 /1 Software Key (USB), Standard Version, support 64 clocks c/w Software CD (w/o Serial Cable) EK-022T-RK1 ETWIN V2 /2 Software Key (USB), Standard + Modem Version, support 64 clocks c/w Software CD (w/o Serial Cable) EK-023T-RK1 ETWIN V2 /3 Software Key (USB), Standard + Modem + Terminal Server Version, support 64 clocks c/w Software CD (w/o Serial Cable) DataCenter DataCenter is meant for users who have their own Time Attendance software, but do not wish to write polling routines to talk to ELID Time Recording Terminals. DataCenter only works with ET630. It provides an output file in text file format. Integration can be done through the output text file (LatestTrans.dat). EW-ETD0-000 DataCenter Interface Software for ET630 in CD only

39 E.SDK Time Clock Software Development Tool E.SDK is a set of interface tools which allows the developers to develop their software using ELID s Time Recording Terminals (ET1200 series, ET630, ET636 & ET3100). It allows integration with various software, making it versatile for many reasons. The E.SDK consists of 3 parts: DLL, Command Line Application and GUI Dynamic Link Library (DLL) The Dynamic Link Library provides an Application Program Interface (API) prepared for development of the PC application that integrates the time clock functionalities. It supports various development tools: Microsoft Visual Basic 6.0 (or above), Borland Delphi, etc. The E.SDK provides sample coding in Delphi Programming language and Visual Basic Programming language. Graphical User Interface Application (GUI) The Graphical User Interface Application on the other hand is a simple polling software. It provides an output file in text file format. Integration can be done through the output text file (LatestTrans.dat). Highlights of DLL, Command Line Synchronizes the time clock date and time with the PC date and time Downloads transactions from the time clock Installs and deletes the card number from the time clock Uploads, downloads and deletes fingerprint templates from the time clock Time clock settings: set sounder, set session, etc System Requirement Processor Operation System Pentium IV or higher Microsoft Windows 2000/XP or higher RAM 64 MB or higher HDD 10 MB (Installation)? MB (Operation) Comm. Port 1 Printer Port 1 Display 800 x 600 (16 colours) or higher

40 OnTime Single-shift Time Attendance Software OnTime Time Management Software is a Windows-based software which works with ET1200 series Time Recording Terminals. The software allows clock data in the time recording terminals to be uploaded to the PC, and processed to generate attendance and overtime reports. These reports can also be exported for use by third party payroll software to generate overtime pay. Highlights of OnTime Single-shift Implement access right to prevent unauthorized access More than 7 predefined reports to record employees attendance Provides leave management to record leave taken Attendance Records can be exported to Excel file (.xls) or text file (.txt) which can be used for integration with third party software Employee s information and clocks data in text file or Excel file can be imported to OnTime s database for attendance reprocessing Company name and logo can be personalized Support user definable staff database Language Support: English System Requirement Processor Operation System Pentium II or higher Microsoft Windows 98 or higher RAM 64 MB or higher HDD 3 MB (Installation)? MB (Operation) Comm. Port 1 Printer Port 1 Display 800 x 600 (16 colours) or higher EK-010T-001 OnTime Time Attendance Software, Single-Shift, unlimited users in CD (with ET10 Softkey, DB9)

41 EasyTime Single-shift Time Attendance Software EasyTime is a Window-based software written to monitor staff attendance effectively and conveniently for ET630 and ET636 Time Recording Terminal. EasyTime provides numerous reports on staff s attendance status as well as exporting clock data to third party payroll system. Highlights of EasyTime Implement access right to prevent unauthorized access More than 7 predefined reports to record employees attendance Provides leave management to record leave taken Attendance Records can be exported to Excel file (.xls) or text file (.txt) which can be used for integration with third party software Employee s information and clocks data in text file or excel file can be imported to EasyTime s database for attendance reprocessing Company name and logo can be personalized Support user definable staff database and user photo images Language Support: English System Requirement Processor Operation System Pentium III or higher Microsoft Windows 98 or higher RAM 128 MB or higher HDD 10 MB (Installation) 50 MB (Operation) Comm. Port 1 Printer Port 1 Display 800 x 600 (16 colours) or higher EW-ETD0-000 EasyTime Time Attendance Software (Single-shift) in CD only (no softkey)

42 Chronos Single Time Attendance Software Chronos is a Window-based user friendly time attendance software written to monitor staff attendance effectively. Chronos works with all Elid Time Clocks and provides numerous reports on staff s attendance status as well as exporting clock data to third party payroll system. Highlights of Chronos Provides a startup wizard which leads the user to complete the basic settings Implement access right to prevent unauthorized access Provides real-time activity monitoring, which means In and Out transactions are reported immediately and displayed on Chronos 20 predefined reports to record employees attendance Provides leave management to record leave taken Attendance of employees can be edited by the administrator Provides a comprehensive audit trail reports of administrator/user s actions Attendance Records can be exported to Excel file (.xls) or text file (.txt) which can be used for integration with third party payroll software to generate salary Employee s information and clocks data in Excel file or text file can be imported to Chronos s database for attendance reprocessing Company name and logo can be personalized Support user definable staff database and user photo images Language Support: English, Malay, Chinese Simplified, Chinese Traditional, Thai System Requirement Processor Operation System Pentium IV or higher Microsoft Windows 2000/XP or higher RAM 128 MB or higher HDD 30 MB (Installation) 100 MB (Operation) Comm. Port 1 Printer Port 1 Display 800 x 600 (16 colours) or higher EW-CNOS-000 Chronos Time Attendance Management Software in CD only, Single-shift, Standalone (no softkey)