Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Period of validity: to Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, Essen Certification of products, processes and services in the areas: Type and project certification of onshore and offshore wind turbines and their components, condition monitoring systems and small and micro wind turbines Abbreviations used: see last page Type and project certification of onshore and offshore wind turbines and their components P20-VA-02, Rev. 12 P20-001, Rev. 1 P20-AA-11, Rev.1 IEC WT IEC ed Certification of wind turbines TÜV NORD Standard for the certification of wind turbines Project certification (here: wind turbines) IEC system for the conformity testing and certification of wind turbines (standard withdrawn) Wind turbines Part 22: Conformity testing and certification of wind turbines This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5

2 IEC , Ed with supplement & 2012 Danish Klima-, Energi- og Bygningministeriet C-WET Amendment German Federal Maritime and Hydrographic Agency (BSH) DIN EN Part 2: Safety of Small Wind Turbines Guideline for the Certification of Wind Turbines Guideline for the Certification of Wind Turbines Guideline for the Certification of Offshore Wind Turbines Bekendtgørelse number 73, Bekendtgørelse om teknisk certificeringsordning for vindmøller. Instructions for the certification programme for the design, manufacture, maintenance, service and installation of wind turbines (Executive Order on a Technical Certification Scheme for Wind Turbines) Preliminary type certification programme 2000 (TAPS-2000, amended 2003) German Institute for Structural Engineering (): German Institute for Structural Engineering (): German Institute for Structural Engineering (): German Institute for Structural Engineering (): "Sample List of Technical Building Regulations" Standard: Constructional realisation of offshore wind turbines, BSH 7005, including amendments Wind turbines Protective measures Requirements for design, operation and maintenance Period of validity: to Translation - 2/5

3 DIN EN Amendment Wind turbines Protective measures Requirements for design, operation and maintenance Above-mentioned certification programmes in conjunction with: IEC , Ed. 2.0 IEC , Ed 3.0 IEC am1 ed IEC , Ed. 1.0 IEC , Ed. 1.0 IEC , Ed. 3 IEC , Ed. 1.0 IEC , Ed. 1.0 IEC , Ed. 1.0 IEC , Ed.1.0 IEC , Ed IEC , Ed. 2.0 Part 1: Safety Requirements Wind Turbines- Part 1: Safety Requirements Amendment 1 - Wind turbines - Part 1: Design requirements Part 3: Design Requirements for Offshore Wind Turbines Windturbinen - Teil 4: Auslegungsanforderungen für Getriebe für Windturbinen Wind turbines - Part 4: Design requirements for wind turbine gearboxes Part 11: Acoustic Noise Measurement Techniques Wind Turbines - Part 12-1: Power performance measurements of electricity- producing wind turbines Wind Turbines - Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry Part 13: Measurement of mechanical loads Wind turbines - Part 14: Declaration of apparent sound power level and tonality values Part 21: Measurement and assessment of power quality characteristics Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines Period of validity: to Translation - 3/5

4 IEC , Ed. 1.0 IEC , Ed. 1.0 German Federal Maritime and Hydrographic Agency (BSH) GL Wind Guidelines 067 Edition 2009 GL Technical Note 067 Edition Part 23: Full-scale structural testing of rotor blades Part 24: Lightning Protection Standard building site survey for offshore wind energy parks, BSH 7004 Certification of Wind Turbines for Extreme Temperatures (here: Cold Climate), Scope of Assessment, Revision 3 Certification of Wind Turbines for Extreme Temperatures (here: Cold Climate), Scope of Assessment, Revision 4 OS-J101: Design of Offshore Wind Turbine Structures (Entwicklung von Offshore - Windenergieanlagen) OS-J102: Design and manufacture of wind turbine blades, offshore and onshore wind turbines OS-J201: Offshore substations for wind farms 2. Condition Monitoring Systeme P20-AA-13, Rev & 2013 Certification of condition monitoring systems for wind turbines Guidelines for the certification of condition monitoring systems for wind turbines Period of validity: to Translation - 4/5

5 3. Small and micro wind turbines P20-AA-14, Rev MCS 006, Issue MCS 010, Issue MCS 011, Issue BWEA Standard AWEA Standard Certification of Small Wind Turbines Zertifizierung kleiner Windenergieanlagen Product Certification Scheme Requirements: Micro and Small Wind Turbines, DECC (Department of Energy and Climate Change), UK 2009 (Produktzertifizierungsanforderungen: Klein- und Mikro- Windenergieanlagen, DECC, UK 2009) Product Certification Scheme Requirements: Factory Production Control Requirements, DECC UK 2008 (Produktzertifizierungsanforderungen: Anforderungen an Kontrollen von Fertigungsstätten, DECC, UK 2008) Product Certification Scheme Requirements: Acceptance Criteria for Testing Required for Product Certification, DECC UK 2008 (Produktzertifizierungsanforderungen: Annahmekriterien für zur Produktzertifizierung erforderliche Prüfungen, DECC, UK 2008) Small Wind Turbine Performance and Safety Standard (Leistung und Sicherheit kleiner Windenergieanlagen, Standard) Small Wind Turbine Performance and Safety Standard (Leistung und Sicherheit kleiner Windenergieanlagen, Standard) Abbreviations used: DIN MCS DECC BWEA C-WET P20 Deutsches Institut für Normung e.v. (German Standards Institute) Microgeneration Certification Scheme Department of Energy and Climate Change British Wind Energy Association Centre for Wind-Energy Technology, India Certification procedures of the TÜV NORD CERT GmbH Period of validity: to Translation - 5/5