Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 and CEN/TS 15675:2007
|
|
|
- Jocelyn Patrick
- 8 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 and CEN/TS 15675:2007 Period of validity: to Holder of certificate: Odournet GmbH Fraunhofer Straße 13; Kiel Tests in the fields: Sampling and measurement of odour emissions and measurement of odour immissions; Immission impact forecast; Determination of the odour intensity and the hedonic tone of air samples; Conditioning and testing the sample container; Determination of odour emissions from building products using test chambers; Module Immission Control Abbreviations used: see last page This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5
2 1 Odour: Areas of activity within the field of Federal Immission Control Act Scope / Name Determination of Emissions Component / Norm SRM QM- Source Title Standard document Odour Air quality - Determination of odour concentration by dynamic olfactometry DIN EN (Corrigenda to ) M-AA02 M-AA02a M-AA02b M-AA03 a M-AA05 M-AA06 a Odour Sampling Olfactometry - Static sampling VDI M-AA02 M-AA02a M-AA02b M-AA03 a Scope / Name Determination of Immissions Component / Norm SRM QM- Source Title Standard document Odour / Grid measurement Measurement of odour impact by field inspection Measurement of the impact frequency of recognizable odours Grid measurement VDI M-AA07a M-AA07c M-AA13 Odour / Plume measurement Measurement of odour impact by field inspection Measurement of the impact frequency of recognizable odours Plume measurement VDI M-AA07b M-AA07c Period of validity: to Translation - 2/5
3 Determination and assessment of odour immissions (in the version dated 29 January 2008 with supplement of 10 September 2008 with background information and interpretation) 2 Determination of the odour intensity and the hedonic tone of air samples M-AA17 In-house method for the determination of the odour intensity and the hedonic tone of air samples Further applicable documents (only scale division): VDI 3882 Bl VDI 3882 Bl Olfactometry; determination of odour intensity Olfactometry - Determination of hedonic odour tone 3 Immission impact forecast Quality Criteria on how to perform and represent dispersion calculations according to the Technical Instructions on Air Quality Control (TA Luft) and the German Guideline on Odour in Ambient Air () VDI 3783 Bl Environmental meteorology Quality control concerning air quality forecast Plant-related pollution control Dispersion calculation according to TA Luft TA Luft Determination and assessment of odour immissions (in the version dated 29 January 2008 with supplement of 10 September 2008 with background information and interpretation) First general administrative regulation pertaining the Federal Immission Control Act (Technical Instructions on Air Quality Control TA Luft of 24 July 2002) Period of validity: to Translation - 3/5
4 4 Conditioning and testing the sample container a Conditioning and testing the sample container DIN EN (Corrigenda to ) VDI Air quality Determination of odour concentration by dynamic olfactometry Olfactometry Static sampling 5 Determination of odour emissions from building products using test chambers DIN ISO Part 28: Determination of odour emissions from building products using test chambers ISO ISO Part 9: Determination of the emission of volatile organic compounds from building products and furnishing Emission test chamber method Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens Period of validity: to Translation - 4/5
5 Abbreviations used: CEM Continuous Emission Monitoring CEN/TS Comité Européen de Normalisation/Technical Specification DIN Deutsches Institut für Normung e. V. EN European Normative Geruchsimmissions-Richtlinie IEC International Electrotechnical Commission ISO International Organization for Standardization MA-xxxx In house method of the Odournet GmbH P-xxxx In house method of the Odournet GmbH SRM Standard Reference Method TA Technical Instructions VDI Verein Deutscher Ingenieure Period of validity: to Translation - 5/5
Annex to the Accreditation Certificate D-PL-18020-01-00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18020-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 16.08.2013 to 31.10.2017 Holder of certificate: Deutsche
Annex to the Accreditation Certificate D-ZE-12007-01-02 according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-02 according to DIN EN ISO/IEC 17065:2013 Period of validity: 06.05.2014 to 05.05.2019 Holder of certificate: TÜV
Annex to the Accreditation Certificate D-ZE-11326-01-00 according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11326-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 27.01.2015 to 16.11.2019 Date of issue: 27.01.2015
ETSI TS 102 042: Electronic Signatures and Infrastructures (ESI): Policy
Abbreviations AIS BGBl BNetzA BSI CC CEM CSP DAR DATech DIN EAL ETR ETSI ISO IT ITSEC ITSEF ITSEM JIL PP SF SigG SigV SOF Anwendungshinweise und Interpretationen zum Schema [Guidance and Interpretations
Verona, 29-30 ottobre 2013!
Verona, 29-30 ottobre 2013! University of Padua Dept. of Chemical Engineering Processes (DPCI) Environmental Systems Analysis Lab(LASA) Eng. Laura Ranzato Comparison between a sensorial technique (Field
Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.02.2015 to 02.02.2020 Holder of certificate: TÜV
TO evolution. The result of 35 years of development and application
TO evolution The result of 35 years of development and application www.to-evolution.com 2 THE BEST OF BOTH WORLDS In 2010 the two most successful and well-known olfactometer manufacturers, ecoma and Odournet,
Guide to certification EMEA & APAC
Short guide to thermography standards and certification of thermographers 1. Introduction There are several standards and guidelines describing thermographic measurements and the certification of thermographers.
Interdisciplinary expert opinions and independent, legally compliant testing services from site selection through to legally compliant plant operation
Air Pollution Control Noise and Vibration Control Plant Safety Environmental Compatibility Light Health & Safety Interdisciplinary expert opinions and independent, legally compliant testing services from
The laboratory fulfils the requirements for periodic emission measurement according to ČSN P CEN/TS 15675:2009
Page 1 of 8 Testing laboratory working site: Working place 1: Technické služby ochrany ovzduší Praha a.s. Testing Laboratory for Measuring Pollutants, Jenečská 146/44, 161 00 Praha Working place 3: Organizational
Policy on Monitoring of Stack Emissions to Air at EPA Licensed Sites
Policy on Monitoring of Stack Emissions to Air at EPA Licensed Sites 1. OVERVIEW In Ireland at present there are no mandatory minimum criteria specified in relation to the completion of stationary source
EWEA Technology Workshop: Wind Turbine Sound 2014, Malmö Noise Protection Regulations for Wind Turbines in Germany
For our Environment EWEA Technology Workshop: Wind Turbine Sound 2014, Malmö Noise Protection Regulations for Wind Turbines in Germany Thomas Myck Andrea Bauerdorff Section I 3.4 Noise Abatement of Industrial
EN 15267 Type Approval & Certification of AMS (QAL1)
EN 15267 Type Approval & Certification of AMS (QAL1) Mr. Karsten Pletscher TÜV Rheinland Energie und Umwelt GmbH Am Grauen Stein, 51105 Cologne Germany Phone: ++49 221 806 2592 karsten.pletscher@de.tuv.com
DEUTSCHE NORM June 2003. Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178
DEUTSCHE NORM June 2003 Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178 { EN ISO 178 ICS 83.080.01 Kunststoffe Bestimmung der Biegeeigenschaften (ISO 178
VdS Guidelines for the Certification of quality management systems
VdS Guidelines for the Certification of quality management systems VdS 2343en : 2015-09 (11) VdS 2343en : 2015-09 (11) Certification of quality management systems VdS Guidelines VdS Guidelines for the
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS TESTING TECHNOLOGY (SHENZHEN) CO., LTD. 4/F, Building #3 Runheng Electronic Park Luxian Road 2 nd Road, Xin an Street, Bao an District Shenzhen City,
CEN Certification Board
CEN Certification Board CCB: n.a. Date: 2011-03-24 Draft Resolution 9/2011: Draft for the Cooperation Agreement between CEN and VDI The CCB, having received CCB doc N 543 and N 577 about a Keymark scheme
Testing and Certification Procedure
A PM 101E April 2011 Guideline for the Testing and Certification Procedure of the VDE Testing and Certification Institute (VDE Institute) (For information purpose only. In any case the German version shall
Hessian Agency for the Environment and Geology Ludwig-Mond-Straße 33 D-34121 Kassel, Germany. Department I3 (Air Pollution, Emission)
page 1 of 11 Hessian Agency for the Environment and Geology Ludwig-Mond-Straße 33 D-34121 Kassel, Germany Editor German version: I3-Wi Status German version: 30.10.2014 Editor English translation: I3-Co
Federal Ministry for Environment, Nature Conservation and Nuclear Safety
The following English text of the First General Administrative Regulation Pertaining the Federal Immission Control Act (Technical Instructions on Air Quality Control TA Luft) is a legally non-binding version.
Service of medical equipments in hospitals
Service of medical equipments in hospitals Dräger TGM GmbH Bernhard Schenk Lübeck, 30 th of November 2012 Dräger TGM GmbH Content Dräger MHS Device Management 1 2 3 4 Reporting (KPI) Consulting 2 Dräger
fulfils all requirements defined in the technical specification The appendix to the certificate is part of the certificate and consists of 6 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Fabrica Nacional de Moneda y Timbre. Real Casa de la Moneda C/Jorge Juan, 106 28009 Madrid, Spain to
Recognition of my Product (Testing Laboratory) Why I need recognition, what is the effect?
Page 1 of 23 Accreditation of Testing Laboratories Accreditation of (Sports Surface) Testing Laboratories Konrad Binder (OIST / Austria) ISSS Year 2000 Forum (Schaffhausen) Note: This is a summary of the
List of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2016 List of EA Publications And International Documents PURPOSE This publication gives the list of EA documents
Onshore Services for. Wind Farms. Developers, Operators, Owners, Lenders & Investors
Onshore Services for Wind Farms Developers, Operators, Owners, Lenders & Investors Research & Studies Customers benefit from our in-depth knowledge based on UL participation in a number of state-ofthe-art
VDI30/VDI40 Static Tool Holders
VDI30/VDI40 Static Tool Holders CAT2013-VDI-STATIC MAR.2014 Lyndex-Nikken VDI30 Static Tool Holders Part #: VDI30-OD75X-B2 Left Hand Short Radial Turning Tool Part #: VDI30-OD20MX-B2 Left Hand Short Radial
This document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 17573 June 2003 ICS 35.240.60 English version Road Transport and Traffic Telematics Electronic Fee Collection (EFC) System
The Radon Calibration Laboratory at the Federal Office for Radiation Protection (BfS)
The Radon Calibration Laboratory at the Federal Office for Radiation Protection (BfS) T.R. Beck, H. Buchröder, J. Döring, E. Foerster, V. Schmidt Bundesamt für Strahlenschutz (Federal Office for Radiation
Control and Indicating Equipment
VdS Guidelines for Fire Detection and Fire Alarm Systems VdS 2540en Control and Indicating Equipment Requirements and Test Methods VdS 2540en : 2010-12 (02) Publishing house: VdS Schadenverhütung GmbH
DEUTSCHE NORM February 2004 DIN EN ISO 18265 {
DEUTSCHE NORM February 2004 DIN EN ISO 18265 { ICS 77.040.10 Supersedes DIN 50150, October 2000 edition. Metallic materials Conversion of hardness values (ISO 18265 : 2003) English version of DIN EN ISO
MINIMUM TECHNICAL AND EXPLOITATION REQUIREMENTS FOR DIGITAL SOUND BROADCASTING DAB+ RECEIVER DESIGNED FOR POLAND
MINIMUM TECHNICAL AND EXPLOITATION REQUIREMENTS FOR DIGITAL SOUND BROADCASTING DAB+ RECEIVER DESIGNED FOR POLAND Version 1.0 Prepared by: Technical Subgroup of Digital Sound Broadcasting Committee National
QUALITY MANUAL. Version 2.6/August 2011. Printed copies are not subject to revision service.
QUALITY MANUAL Version 2.6/August 2011. Printed copies are not subject to revision service. About Power Innovation The company Power Innovation Stromversorgungstechnik GmbH belongs to the leading developers
DRAFT ÖNORM ISO/IEC 27005
DRAFT ÖNORM ISO/IEC 27005 Edition: 2013-07-01 Information technology Security techniques Information security risk management (ISO/IEC 27005:2011) Informationstechnologie Sicherheitstechnik Informationssicherheits-
TÜV RHEINLAND ENERGIE UND UMWELT GMBH
TÜV RHEINLAND ENERGIE UND UMWELT GMBH Report on performance testing of the Air Pollution Monitor 2 (APM-2) measuring system manufactured by Comde-Derenda GmbH for the components suspended particulate matter
English version. Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark
CEN WORKSHOP CWA 15554 June 2006 AGREEMENT ICS 35.240.99 English version Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark This CEN Workshop Agreement
Spillemyndigheden s Certification Programme. General requirements SCP.00.00.EN.1.1
SCP.00.00.EN.1.1 Table of contents Table of contents... 2 1.1 Spillemyndigheden s certification programme... 3 1.2 Definitions... 3 1.3 Legal basis for the certification programme... 4 1.4 Version... 4
ANSI Procedures for the National Adoption of ISO and IEC Standards as American National Standards
ANSI Procedures for the National Adoption of ISO and IEC Standards as American National Standards Edition: January 2007 Issue date: January 31, 2007 Copyright by the American National Standards Institute
Ministerio del Medio Ambiente 2013 STRATEGY FOR ODORS MANAGEMENT IN CHILE (2014 2017)
Ministerio del Medio Ambiente 2013 STRATEGY FOR ODORS MANAGEMENT IN CHILE (2014 2017) Division of Air Quality, Ministry of the Environment Santiago, Chile, September 2013 Document endorsed by: Ricardo
Dr. Yoshiharu Iwasaki
Ⅰ Profile Dr. Yoshiharu Iwasaki Born on December 19, 1944 Most recently acquired academic qualification: Tokyo Institute of Technology, (M.Sc.) Career: 1970 Tokyo Metropolitan Research Institute for Environmental
EN 15267 - A new unified testing and approval scheme for automated measuring systems
EN 15267 - A new unified testing and approval scheme for automated measuring systems Richard Gould, Technical Advisor, Environment Agency, Lutra House, Dodd Way, Walton Summit Industrial Estate, Preston,
fulfils all requirements defined in the technical specification The appendix to the certificate is part of the certificate and consists of 6 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its certification service D
TÜV AUSTRIA Group Worldwide Services
TÜV AUSTRIA Group Worldwide Services Worldwide services Safety that reassures. Reliability that convinces. The aims of the TÜV AUSTRIA Group have been and always will be to assist in improving technical
Manual stack emission monitoring Performance standard for organisations. Environment Agency November 2011 Version 7.2
Manual stack emission monitoring Performance standard for organisations Environment Agency November 2011 Version 7.2 Record of amendments Version Date Section Amendment number 7.1 Jan 11 5.6.8 Added requirement
Title: IEC WT 01 vs. IEC 61400-22 Development of a new standard and innovations in certification of Wind Turbines. mike.woebbeking@gl-group.
Title: IEC WT 01 vs. IEC 61400-22 Development of a new standard and innovations in certification of Wind Turbines Author: Address: Mike Woebbeking Germanischer Lloyd Industrial Services GmbH, Business
CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: 0000035008. DURAG data systems GmbH Kollaustr.1 05 22453 Harnburg Germany
. Umwelt Bundes A_ TÜVRheinland Amt @ Precisely Right. For our Environment CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035008 Certified AMS: Manufacturer: Test Institute: D-EMS
Notes on the certification and surveillance of management systems for companies with subsidiaries
Editor: Publisher: VdS Schadenverhütung VdS Schadenverhütung VdS-Leaflet Notes on the certification and surveillance of management systems for companies with subsidiaries VdS 2836en : 2013-04 Contents
UFIPOLNET. Street detailed calculation of the air quality in Saxony. Landesamt für Umwelt und Geologie
UFIPOLNET Street detailed calculation of the air quality in Saxony Introduction: The requirement of a street detailed calculation of the air quality The council directive 1996/62/EG, which is effective
Air Pollution Prevention Manual on Emission Monitoring
Texte 06 08 Air Pollution Prevention Manual on Emission Monitoring ISSN 1862-4804 TEXTE ENVIRONMENTAL RESEARCH OF THE FEDERAL MINISTRY OF THE ENVIRONMENT, NATURE CONSERVATION AND NUCLEAR SAFETY Research
Raad voor Accreditatie (Dutch Accreditation Council RvA) Assessment of Conformity Assessment Schemes
Raad voor Accreditatie (Dutch Accreditation Council RvA) Assessment of Conformity Assessment Schemes Document code: RvA-T033-UK Version 3, 28 februari 2014 A Rv A-Explanatory note describes the policy
GERMAN STANDARDIZATION STRATEGY
STANDARDIZATION IN GERMANY HELPS BUSINESS AND SOCIETY STRENGTHEN, DEVELOP AND OPEN UP REGIONAL AND GLOBAL MARKETS Contents Foreword 3 Opening statement Wolfgang Clement, Federal Minister of Economy and
Terms and Conditions of Certification TUV Rheinland of North America
Terms Conditions of Certification TUV Rheinl of North America I. General Terms Conditions of Certification 1. Scope 1.1 These Terms Conditions of Certification apply to the agreed certification services
Foundation Bridge in IT Service Management (ITSM) according to ISO/IEC 20000. Specification Sheet. ISO/IEC 20000 Foundation Bridge TÜV SÜD Akademie
Foundation Bridge in IT Service Management (ITSM) according to ISO/IEC 20000 Specification Sheet TÜV SÜD Akademie Issue: 2.0 Date: 25 October 2012 Table of Contents 1 Reading aid... 4 2 ISO/IEC 20000 -
Annex to the Accreditation Certificate D-PL-13372-01-00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-13372-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.03.2012 to 25.03.2017
ÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
Ordinance on Specialised Waste Management Companies (Entsorgungsfachbetriebeverordnung - EfbV) *) of 10 September 1996
Ordinance on Specialised Waste Management Companies (Entsorgungsfachbetriebeverordnung - EfbV) *) of 10 September 1996 The Federal Government, having heard the parties concerned, and pursuant to Article
Performance Standards and Test Procedures for Automated Dust Arrestment-Plant Monitors
Performance Standards and Test Procedures for Automated Dust Arrestment-Plant Monitors Certification under MCERTS according to EN 15859 Environment Agency Version 1 August 2010 Record of amendments Version
NABL NATIONAL ACCREDITATION
NABL 160 NABL NATIONAL ACCREDITATION BOARD FOR TESTING AND CALIBRATION LABORATORIES GUIDE for PREPARING A QUALITY MANUAL ISSUE NO. : 05 AMENDMENT NO : 00 ISSUE DATE: 27.06.2012 AMENDMENT DATE: -- Amendment
TYPE CERTIFICATION OF WIND TURBINES
TYPE CERTIFICATION OF WIND TURBINES March 2003, rev. 9 DET NORSKE VERITAS, DANMARK A/S Building 114 Frederiksborgvej 399 P. O. Box 49 DK-4000 Roskilde Denmark Email: Wind.Turbine.Certification@dnv.com
Check-list for auditors. Audit visit at candidate registered laboratories
Check-list for auditors Audit visit at candidate registered laboratories 1 Contents Introduction Laboratory documentation required by the standard(s), available for inspection by the auditor Items to be
List of Criteria "LGA-tested for contaminants"
TÜV Rheinland LGA Products GmbH Created by: Dr. Jelena Galinkina Reviewed by: Dr. Christian Schelle Scope of application These certification criteria are valid for all types of PUR soft foams (standard
Guido Baum Phone: +49(0)221-806 2592 Mail: guido.baum@de.tuv.com www.qal1.de
Determination of CO 2 and N 2 O emissions with CEM Systems within the scope of greenhouse gas trading CEM 2014 Istanbul Thursday, 15 th May 2014 TÜV Rheinland Energie und Umwelt GmbH Guido Baum Phone:
General requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)
Edition: 1998-05-01 ldentical (IDT) with ÖVE EN 4501 2: I998 ISOIIEC 62 Guide: 1996 Supersedes ÖNORM EN 4501 2: 1990-06-08 ÖNORM EN 45012 Bbl 1:1990 08 ICS 03.1 20.20 General requirements for bodies operating
Software Quality. Unit9. Software Quality Standards
Software Quality Unit9. Software Quality Standards 1 Standards A Standard is a document of voluntary application, containing technical specifications based on experience and technological development results.
Sensory evaluation of building products - Results of a German round robin test
Sensory evaluation of building products - Results of a German round robin test Johannes Kasche 1, Arne Dahms 1, Wolfgang Horn 2, Oliver Jann 2, Dirk Müller 1 1 Technische Universität Berlin, Germany 2
SUSTAINABLE BATTERY-RECYCLING. WE CLOSE THE LOOP.
SUSTAINABLE BATTERY-RECYCLING. WE CLOSE THE LOOP. T E C H N O L O G I E S MEMBER OF ECOBAT TECHNOLOGIES SHAPING PERSPECTIVES The Braubach-based BERZELIUS Metall GmbH (BMB) is a foremost producer of lead
Additional Requirements
VdS Guidelines for Smoke Alarm Devices VdS 3131en Requirements and Test Methods VdS 3131en : 2010-05 (01) Publisher and publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 174 50735 Köln, Germany
Seeding the Global Public Sector Cloud: Part I - A Role for International Standards 1
Seeding the Global Public Sector Cloud: Part I - A Role for International Standards 1 Abstract: This is the first of a two part paper that assesses current trends in the adoption of public sector cloud
Annex to the Accreditation Certificate D-PL-14139-01-00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-14139-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.10.2015 to 25.10.2020 Date of issue: 26.10.2015
!,p@v" DIN EN 15038 { Translation services Service requirements English version of DIN EN 15038:2006-08
DEUTSCHE NORM August 2006 DIN EN 15038 { ICS 03.080.20 Translation services Service requirements English version of DIN EN 15038:2006-08 Übersetzungs-Dienstleistungen Dienstleistungsanforderungen Englische
Scheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme
Scheme rules for thermal insulation products for building equipment and industrial installations - certification scheme April 6, 2011 1. Introduction This document presents the rules of the product certification
Added value with the MPA NRW-Quality Label
MPA NRW n n n independent competent reliable The MPA NRW offers its clients services like material tests, manufacturer surveillance or product certification in the sphere of building products, building
CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: 0000034862. Gaschromategraph GC 5000 BTX Type FID for Benzene
Umwelt Bundes Amt ror our Environ ment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000034862 Certified AMS: Manufacturer: Test Institute: Gaschromategraph
R221 - Specific Requirements: Forensic
R221 - Specific Requirements: Forensic Page 1 of 6 R221 - Specific Requirements: Forensic (October 2015) 2015 by A2LA. All rights reserved. No part of this document may be reproduced in any form or by
DRAFT ÖNORM EN ISO 11986
DRAFT ÖNORM EN ISO 11986 Edition: 2009-10-01 Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release (ISO/DIS 11986:2009) Augenoptik Kontaktlinsen
INTRODUCTION TO ISO 9001 REVISION - COMMITTEE DRAFT
INTRODUCTION TO ISO 9001 REVISION - COMMITTEE DRAFT AGENDA Introduction Annex SL Changes to ISO 9001 Future Development How SGS can support you 2 INTRODUCTION ISO 9001 Revision Committee Draft Issued 2013
ISO 27001: Information Security and the Road to Certification
ISO 27001: Information Security and the Road to Certification White paper Abstract An information security management system (ISMS) is an essential part of an organization s defense against cyberattacks
USE OF FIBRE OPTICS INTERNATIONAL STANDARDS FOR CALIBRATION LABORATORY ACCREDITATION INTERNATIONAL ELECTROTECHNICAL COMMISSION
USE OF FIBRE OPTICS INTERNATIONAL STANDARDS FOR CALIBRATION LABORATORY ACCREDITATION INTERNATIONAL ELECTROTECHNICAL COMMISSION USE OF FIBRE OPTICS INTERNATIONAL STANDARDS FOR CALIBRATION LABORATORY ACCREDITATION
A GUIDANCE NOTE ON THE BEST PRACTICABLE MEANS FOR ELECTRICITY WORKS BPM 7/1 (2014)
A GUIDANCE NOTE ON THE BEST PRACTICABLE MEANS FOR ELECTRICITY WORKS (COAL-FIRED PLANT, GAS-FIRED GAS TURBINE, AND OIL-FIRED GAS TURBINE (PEAK LOPPING PLANT)) BPM 7/1 (2014) Environmental Protection Department
COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 1515-1:2000
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1515-1 November 1999 ICS 21.060.10; 21.060.20; 23.040.60 English version Flanges and their joints - Bolting - Part 1: Selection of bolting Brides
IFA-Coding-System Transport Logistics Specification. Automatic identification of transport units in the pharmaceutical supply chain
IFA-Coding-System Transport Logistics Specification Automatic identification of transport units in the pharmaceutical supply chain Version: 1.00 Date of issue: December 2012 Table of Contents 1 Foreword
National Accreditation Board for Certification Bodies. Accreditation Criteria
Accreditation Criteria for Medical devices - Quality management systems - for regulatory purposes Certification BCB 135 October 2012 Contents 0.0 Foreword 2 1.0 Scope 2 2.0 Criteria 2 3.0 Guidance on the
INTERNATIONAL STANDARD
ISO/IEC 14543-4-2 INTERNATIONAL STANDARD Edition 1.0 2008-05 Information technology Home electronic system (HES) architecture Part 4-2: Communication layers Transport, network and general parts of data
PROKAS (As at: April 1999, last changes 30. 01 2008)... Calculation method to determine traffic induced pollution levels
Ingenieurbüro Lohmeyer GmbH & Co. KG Immissionsschutz, Klima, Aerodynamik, Umweltsoftware An der Roßweid 3, D-76229 Karlsruhe Telefon: + 49 (0) 721 / 6 25 10-0 Telefax: + 49 (0) 721 / 6 25 10 30 E-Mail:
DRAFT ÖNORM EN 16602-40-12
DRAFT ÖNORM EN 16602-40-12 Edition: 2013-12-15 Space product assurance Fault tree analysis Adoption notice ECSS/IEC 61025 Raumfahrtproduktsicherung Fehlerbaumanalyse Adoption notice ECSS/IEC 61025 Assurance
Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier
Dansk standard DS/EN 50272-2 1. udgave 2001-08-10 Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier Safety requirements for secondary batteries and battery
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values IEC 2005 Copyright - all rights reserved No part of this
Basics: Energy Management Systems according to ISO 50001
Basics: Energy Management Systems according to ISO 50001 www.efficiency-from-germany.info Dipl.-Ing. Thomas Frank Envidatec GmbH AGENDA Introduction Envidatec 3 7 Basics EnMS ISO 50001 8 15 Terms and Definitions
How To Understand And Understand The Dvw
Deutscher Verein des Gas- und Wasserfachs e. V. e www.dvgw.de The DVGW competence network Quality, safety, innovation Shaping the future Our service portfolio CONFIDENT, INNOVATIVE AND COOPERATIVE DEDICATED